diff options
| -rw-r--r-- | wirish/HardwareSPI.cpp | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/wirish/HardwareSPI.cpp b/wirish/HardwareSPI.cpp index 1acba76..6cf6a96 100644 --- a/wirish/HardwareSPI.cpp +++ b/wirish/HardwareSPI.cpp @@ -39,7 +39,7 @@ #include <wirish/wirish.h> #include <wirish/boards.h> -#if CYCLES_PER_MICROSECOND != 72 +#if CYCLES_PER_MICROSECOND != 72 && CYCLES_PER_MICROSECOND != 84 /* TODO [0.2.0?] something smarter than this */ #warning "Unexpected clock speed; SPI frequency calculation will be incorrect" #endif @@ -123,7 +123,7 @@ void HardwareSPI::begin(SPIFrequency frequency, uint32 bitOrder, uint32 mode) { } void HardwareSPI::begin(void) { - this->begin(SPI_1_125MHZ, MSBFIRST, 0); + this->begin(SPI_PCLK_DIV_32, MSBFIRST, 0); // 1.125 MHz for a 72 MHz board } void HardwareSPI::beginSlave(uint32 bitOrder, uint32 mode) { @@ -333,8 +333,8 @@ static const spi_baud_rate baud_rates[MAX_SPI_FREQS] __FLASH__ = { * (CYCLES_PER_MICROSECOND == 72, APB2 at 72MHz, APB1 at 36MHz). */ static spi_baud_rate determine_baud_rate(spi_dev *dev, SPIFrequency freq) { - if (rcc_dev_clk(dev->clk_id) == RCC_APB2 && freq == SPI_140_625KHZ) { - /* APB2 peripherals are too fast for 140.625 KHz */ + if (rcc_dev_clk(dev->clk_id) == RCC_APB2 && freq == SPI_PCLK_DIV_256) { + /* APB2 peripherals are too fast for the largest divider */ ASSERT(0); return (spi_baud_rate)~0; } |