maple mini prototype seems to be working

4 files changed, 115 insertions, 8 deletions

diff --git a/wirish/boards.h b/wirish/boards.h
index 0625d0a..558e1c3 100644
--- a/wirish/boards.h
+++ b/wirish/boards.h
@@ -70,12 +70,15 @@ typedef struct PinMapping {
     uint32 timer_chan;
 } PinMapping;
 
-/* LeafLabs Maple rev3, rev4 */
+/* LeafLabs Maple rev3, rev5 */
 #ifdef BOARD_maple
 
     #define CYCLES_PER_MICROSECOND  72
     #define MAPLE_RELOAD_VAL        71999 /* takes a cycle to reload */
 
+    #define BOARD_BUTTON_PIN   38
+    #define BOARD_LED_PIN      13
+
     static __attribute__ ((unused)) PinMapping PIN_MAP[NR_GPIO_PINS] = {
         /* D0/PA3 */
         {GPIOA_BASE,  3,        ADC3, TIMER2_CH4_CCR,  EXTI_CONFIG_PORTA, TIMER2, 4},
@@ -163,10 +166,12 @@ typedef struct PinMapping {
         {GPIOC_BASE,  9, ADC_INVALID,  TIMER_INVALID,  EXTI_CONFIG_PORTC, TIMER_INVALID, TIMER_INVALID}
     };
 
-#endif
+    #define BOARD_INIT do {                           \
+        } while(0)
 
-/* LeafLabs Maple Native (prototype) */
-#ifdef BOARD_maple_native
+#elif defined(BOARD_maple_native)
+
+    /* LeafLabs Maple Native (prototype) */
 
     #define CYCLES_PER_MICROSECOND  72
     #define MAPLE_RELOAD_VAL        71999 /* takes a cycle to reload */
@@ -290,13 +295,15 @@ typedef struct PinMapping {
         /* D13/PA5 */
         {EXTI5,  EXTI_CONFIG_PORTA},
     };
-#endif
 
-#ifdef BOARD_maple_mini
+#elif defined(BOARD_maple_mini)
 
     #define CYCLES_PER_MICROSECOND 72
     #define MAPLE_RELOAD_VAL       71999 /* takes a cycle to reload */
 
+    #define BOARD_BUTTON_PIN 32
+    #define BOARD_LED_PIN    33
+
     static __attribute__ ((unused)) PinMapping PIN_MAP[NR_GPIO_PINS] = {
         /* D0/PC15 */
         {GPIOC_BASE, 15,  ADC_INVALID, TIMER_INVALID,  EXTI_CONFIG_PORTC, TIMER_INVALID, TIMER_INVALID},
@@ -368,11 +375,18 @@ typedef struct PinMapping {
         {GPIOB_BASE, 12,  ADC_INVALID, TIMER_INVALID,  EXTI_CONFIG_PORTB, TIMER_INVALID, TIMER_INVALID},
     };
 
+    /* since we want the Serial Wire/JTAG pins as GPIOs, disable both
+       SW and JTAG debug support */
+    /* don't use __clear_bits here! */
+    #define BOARD_INIT                                                  \
+        do {                                                            \
+            *AFIO_MAPR = (*AFIO_MAPR | BIT(26)) & ~(BIT(25) | BIT(24)); \
+        } while (0)
 
-#endif
+#else
 
-#ifndef CYCLES_PER_MICROSECOND
 #error "Board type has not been selected correctly."
+
 #endif
 
 #ifdef __cplusplus
diff --git a/wirish/io.h b/wirish/io.h
index f82e414..66ba74d 100644
--- a/wirish/io.h
+++ b/wirish/io.h
@@ -33,6 +33,7 @@
 
 #include "gpio.h"
 #include "adc.h"
+#include "time.h"
 
 #ifdef __cplusplus
 extern "C"{
@@ -158,6 +159,63 @@ uint32 digitalRead(uint8);
  */
 uint32 analogRead(uint8 pin);
 
+/**
+ * Toggles the digital value at the given pin.
+ *
+ * The pin must have its mode set to OUTPUT.
+ *
+ * @param pin the pin to toggle.  If the pin is HIGH, set it LOW.  If
+ * it is LOW, set it HIGH.
+ *
+ * @see pinMode()
+ */
+void togglePin(uint8 pin);
+
+/**
+ * Toggle the LED.
+ *
+ * If the LED is on, turn it off.  If it is off, turn it on.
+ *
+ * The LED must its mode set to OUTPUT. This can be accomplished
+ * portably over all LeafLabs boards by calling pinMode(BOARD_LED_PIN,
+ * OUTPUT) before calling this function.
+ *
+ * @see pinMode()
+ */
+static inline void toggleLED() {
+    togglePin(BOARD_LED_PIN);
+}
+
+/**
+ * If the button is currently pressed, waits until the button is no
+ * longer being pressed, and returns true.  Otherwise, returns false.
+ *
+ * The button pin must have its mode set to INPUT.  This can be
+ * accomplished portably over all LeafLabs boards by calling
+ * pinMode(BOARD_BUTTON_PIN, INPUT).
+ *
+ * @see pinMode()
+ */
+uint8 isButtonPressed();
+
+/**
+ * Wait until the button is pressed and released, timing out if no
+ * press occurs.
+ *
+ * The button pin must have its mode set to INPUT.  This can be
+ * accomplished portably over all LeafLabs boards by calling
+ * pinMode(BOARD_BUTTON_PIN, INPUT).
+ *
+ * @param timeout_millis Number of milliseconds to wait until the
+ * button is pressed.  If timeout_millis is 0, wait forever.
+ *
+ * @return true, if the button was pressed; false, if the timeout was
+ * reached.
+ *
+ * @see pinMode()
+ */
+uint8 waitForButtonPress(uint32 timeout_millis);
+
 #ifdef __cplusplus
 } // extern "C"
 #endif
diff --git a/wirish/wirish.c b/wirish/wirish.c
index 0abec41..3239838 100644
--- a/wirish/wirish.c
+++ b/wirish/wirish.c
@@ -74,4 +74,7 @@ void init(void) {
     timer_init(TIMER8, 1);
 #endif
     setupUSB();
+
+    /* include the board-specific init macro */
+    BOARD_INIT;
 }
diff --git a/wirish/wirish_digital.c b/wirish/wirish_digital.c
index aa22196..cdd04bf 100644
--- a/wirish/wirish_digital.c
+++ b/wirish/wirish_digital.c
@@ -103,3 +103,35 @@ void digitalWrite(uint8 pin, uint8 val) {
 
     gpio_write_bit(PIN_MAP[pin].port, PIN_MAP[pin].pin, val);
 }
+
+void togglePin(uint8 pin) {
+    gpio_toggle_pin(PIN_MAP[pin].port, PIN_MAP[pin].pin);
+}
+
+uint8 isButtonPressed() {
+    if (digitalRead(BOARD_BUTTON_PIN)) {
+        while (digitalRead(BOARD_BUTTON_PIN))
+            ;
+        return true;
+    }
+    return false;
+}
+
+uint8 waitForButtonPress(uint32 timeout) {
+    uint32 start = millis();
+    uint32 time;
+    if (timeout == 0) {
+        while (!isButtonPressed())
+            ;
+        return true;
+    }
+    do {
+        time = millis();
+        /* properly handle wrap-around */
+        if ((start > time && time + (0xffffffffU - start) > timeout) ||
+            time - start > timeout) {
+            return false;
+        }
+    } while (!isButtonPressed());
+    return true;
+}