Merge branch 'wip-family-support'

Merge the long-lived (too long; future changes like these will need to
proceed more incrementally) development branch of libmaple, containing
experimental STM32F2 and STM32F1 value line support, into master.

This required many changes to the structure of the library. The most
important structural reorganizations occurred in:

- 954f9e5: moves public headers to include directories
- 3efa313: uses "series" instead of "family"
- c0d60e3: adds board files to the build system, to make it easier to
  add new boards
- 096d86c: adds build logic for targeting different STM32 series
  (e.g. STM32F1, STM32F2)

This last commit in particular (096d86c) is the basis for the
repartitioning of libmaple into portable sections, which work on all
supported MCUs, and nonportable sections, which are segregated into
separate directories and contain all series-specific code. Moving
existing STM32F1-only code into libmaple/stm32f1 and wirish/stm32f1,
along with adding equivalents under .../stm32f2 directories, was the
principal project of this branch.

Important API changes occur in several places. Existing code is still
expected to work on STM32F1 targets, but there have been many
deprecations. A detailed changelog explaining the situation needs to
be prepared.

F2 and F1 value line support is not complete; the merge is proceeding
prematurely in this respect. We've been getting more libmaple patches
from the community lately, and I'm worried that the merge conflicts
with the old tree structure will become painful to manage.

Conflicts:
	Makefile

Resolved Makefile conflicts manually; this required propagating
-Xlinker usage into support/make/target-config.mk.

Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>

1 files changed, 0 insertions, 223 deletions

diff --git a/wirish/comm/HardwareSPI.h b/wirish/comm/HardwareSPI.h
deleted file mode 100644
index d138910..0000000
--- a/wirish/comm/HardwareSPI.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/******************************************************************************
- * The MIT License
- *
- * Copyright (c) 2010 Perry Hung.
- *
- * Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use, copy,
- * modify, merge, publish, distribute, sublicense, and/or sell copies
- * of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *****************************************************************************/
-
-/**
- * @file HardwareSPI.h
- * @brief High-level SPI interface
- *
- * This is a "bare essentials" polling driver for now.
- */
-
-/* TODO [0.1.0] Remove deprecated methods. */
-
-#include "libmaple_types.h"
-#include "spi.h"
-
-#include "boards.h"
-
-#ifndef _HARDWARESPI_H_
-#define _HARDWARESPI_H_
-
-/**
- * @brief Defines the possible SPI communication speeds.
- */
-typedef enum SPIFrequency {
-    SPI_18MHZ       = 0, /**< 18 MHz */
-    SPI_9MHZ        = 1, /**< 9 MHz */
-    SPI_4_5MHZ      = 2, /**< 4.5 MHz */
-    SPI_2_25MHZ     = 3, /**< 2.25 MHz */
-    SPI_1_125MHZ    = 4, /**< 1.125 MHz */
-    SPI_562_500KHZ  = 5, /**< 562.500 KHz */
-    SPI_281_250KHZ  = 6, /**< 281.250 KHz */
-    SPI_140_625KHZ  = 7, /**< 140.625 KHz */
-} SPIFrequency;
-
-#define MAX_SPI_FREQS 8
-
-#if CYCLES_PER_MICROSECOND != 72
-/* TODO [0.2.0?] something smarter than this */
-#warning "Unexpected clock speed; SPI frequency calculation will be incorrect"
-#endif
-
-/**
- * @brief Wirish SPI interface.
- *
- * This implementation uses software slave management, so the caller
- * is responsible for controlling the slave select line.
- */
-class HardwareSPI {
-public:
-    /**
-     * @param spiPortNumber Number of the SPI port to manage.
-     */
-    HardwareSPI(uint32 spiPortNumber);
-
-    /*
-     * Set up/tear down
-     */
-
-    /**
-     * @brief Turn on a SPI port and set its GPIO pin modes for use as master.
-     *
-     * SPI port is enabled in full duplex mode, with software slave management.
-     *
-     * @param frequency Communication frequency
-     * @param bitOrder Either LSBFIRST (little-endian) or MSBFIRST (big-endian)
-     * @param mode SPI mode to use, one of SPI_MODE_0, SPI_MODE_1,
-     *             SPI_MODE_2, and SPI_MODE_3.
-     */
-    void begin(SPIFrequency frequency, uint32 bitOrder, uint32 mode);
-
-    /**
-     * @brief Equivalent to begin(SPI_1_125MHZ, MSBFIRST, 0).
-     */
-    void begin(void);
-
-    /**
-     * @brief Turn on a SPI port and set its GPIO pin modes for use as a slave.
-     *
-     * SPI port is enabled in full duplex mode, with software slave management.
-     *
-     * @param bitOrder Either LSBFIRST (little-endian) or MSBFIRST(big-endian)
-     * @param mode SPI mode to use
-     */
-    void beginSlave(uint32 bitOrder, uint32 mode);
-
-    /**
-     * @brief Equivalent to beginSlave(MSBFIRST, 0).
-     */
-    void beginSlave(void);
-
-    /**
-     * @brief Disables the SPI port, but leaves its GPIO pin modes unchanged.
-     */
-    void end(void);
-
-    /*
-     * I/O
-     */
-
-    /**
-     * @brief Return the next unread byte.
-     *
-     * If there is no unread byte waiting, this function will block
-     * until one is received.
-     */
-    uint8 read(void);
-
-    /**
-     * @brief Read length bytes, storing them into buffer.
-     * @param buffer Buffer to store received bytes into.
-     * @param length Number of bytes to store in buffer.  This
-     *               function will block until the desired number of
-     *               bytes have been read.
-     */
-    void read(uint8 *buffer, uint32 length);
-
-    /**
-     * @brief Transmit a byte.
-     * @param data Byte to transmit.
-     */
-    void write(uint8 data);
-
-    /**
-     * @brief Transmit multiple bytes.
-     * @param buffer Bytes to transmit.
-     * @param length Number of bytes in buffer to transmit.
-     */
-    void write(const uint8 *buffer, uint32 length);
-
-    /**
-     * @brief Transmit a byte, then return the next unread byte.
-     *
-     * This function transmits before receiving.
-     *
-     * @param data Byte to transmit.
-     * @return Next unread byte.
-     */
-    uint8 transfer(uint8 data);
-
-    /*
-     * Pin accessors
-     */
-
-    /**
-     * @brief Return the number of the MISO (master in, slave out) pin
-     */
-    uint8 misoPin(void);
-
-    /**
-     * @brief Return the number of the MOSI (master out, slave in) pin
-     */
-    uint8 mosiPin(void);
-
-    /**
-     * @brief Return the number of the SCK (serial clock) pin
-     */
-    uint8 sckPin(void);
-
-    /**
-     * @brief Return the number of the NSS (slave select) pin
-     */
-    uint8 nssPin(void);
-
-    /* -- The following methods are deprecated --------------------------- */
-
-    /**
-     * @brief Deprecated.
-     *
-     * Use HardwareSPI::transfer() instead.
-     *
-     * @see HardwareSPI::transfer()
-     */
-    uint8 send(uint8 data);
-
-    /**
-     * @brief Deprecated.
-     *
-     * Use HardwareSPI::write() in combination with
-     * HardwareSPI::read() (or HardwareSPI::transfer()) instead.
-     *
-     * @see HardwareSPI::write()
-     * @see HardwareSPI::read()
-     * @see HardwareSPI::transfer()
-     */
-    uint8 send(uint8 *data, uint32 length);
-
-    /**
-     * @brief Deprecated.
-     *
-     * Use HardwareSPI::read() instead.
-     *
-     * @see HardwareSPI::read()
-     */
-    uint8 recv(void);
-private:
-    spi_dev *spi_d;
-};
-
-#endif
-