diff options
| author | Marti Bolivar <mbolivar@leaflabs.com> | 2012-06-07 01:24:01 -0400 |
|---|---|---|
| committer | Marti Bolivar <mbolivar@leaflabs.com> | 2012-06-07 03:40:11 -0400 |
| commit | 42570013c5266449f7e8512a77fe66b8e852294d (patch) | |
| tree | f5e5c38175307dbda5cd13b117e6c43f3298f635 /support/openocd/flash_0.3.cfg | |
| parent | 421e49046cddf786b20db35f76c2bf6edcd39ef3 (diff) | |
| download | librambutan-42570013c5266449f7e8512a77fe66b8e852294d.tar.gz librambutan-42570013c5266449f7e8512a77fe66b8e852294d.zip | |
Move OpenOCD stuff into contrib/.
This has gone unmaintained for long enough.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
Diffstat (limited to 'support/openocd/flash_0.3.cfg')
| -rw-r--r-- | support/openocd/flash_0.3.cfg | 89 |
1 files changed, 0 insertions, 89 deletions
diff --git a/support/openocd/flash_0.3.cfg b/support/openocd/flash_0.3.cfg deleted file mode 100644 index 41c6532..0000000 --- a/support/openocd/flash_0.3.cfg +++ /dev/null @@ -1,89 +0,0 @@ -# script for stm32 - -interface ft2232 -ft2232_device_desc "Olimex OpenOCD JTAG" -ft2232_layout olimex-jtag -ft2232_vid_pid 0x15ba 0x0003 - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME stm32 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# jtag speed speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so ufse F_JTAG = 1MHz -jtag_khz 1000 - -jtag_nsrst_delay 100 -jtag_ntrst_delay 100 - -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config trst_and_srst - -#jtag scan chain -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - # See STM Document RM0008 - # Section 30.6.3 - set _CPUTAPID 0x3ba00477 -} - -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -if { [info exists BSTAPID ] } { - # FIXME this never gets used to override defaults... - set _BSTAPID $BSTAPID -} else { - # See STM Document RM0008 - # Section 29.6.2 - # Low density devices, Rev A - set _BSTAPID1 0x06412041 - # Medium density devices, Rev A - set _BSTAPID2 0x06410041 - # Medium density devices, Rev B and Rev Z - set _BSTAPID3 0x16410041 - # High density devices, Rev A - set _BSTAPID4 0x06414041 - # Connectivity line devices, Rev A and Rev Z - set _BSTAPID5 0x06418041 -} -jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 \ - -expected-id $_BSTAPID2 -expected-id $_BSTAPID3 \ - -expected-id $_BSTAPID4 -expected-id $_BSTAPID5 - - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME - -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x5000 -work-area-backup 0 -# TODO: native -#$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x10000 -work-area-backup 0 - -flash bank stm32x 0x08000000 0x00020000 0 0 $_TARGETNAME - -proc flash_chip {} { - echo "Halting..." - halt - echo "Erasing..." - flash erase_address 0x08000000 0x20000 - # TODO: native - #flash erase_address 0x08000000 0x80000 - echo "Flashing image..." - flash write_bank 0 build/maple.bin 0 - echo "Verifying image..." - verify_image build/maple.bin 0x08000000 bin - echo "Checksum verified, resetting chip" - reset run - echo "Daemon shutdown" - shutdown -} - -init -flash_chip |