removed extraneous files, stm32lib examples

git-svn-id: https://leaflabs.googlecode.com/svn/trunk/library@70 749a229e-a60e-11de-b98f-4500b42dc123

1 files changed, 0 insertions, 87 deletions

diff --git a/src/stm32lib/examples/USART/MultiProcessor/readme.txt b/src/stm32lib/examples/USART/MultiProcessor/readme.txt
deleted file mode 100755
index dd3c62f..0000000
--- a/src/stm32lib/examples/USART/MultiProcessor/readme.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************

-* File Name          : readme.txt

-* Author             : MCD Application Team

-* Version            : V2.0.1

-* Date               : 06/13/2008

-* Description        : Description of the USART Multi Processor Example.

-********************************************************************************

-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS

-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.

-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,

-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE

-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING

-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

-*******************************************************************************/

-

-Example description

-===================

-This example provides a description of how to use the USART in multi-processor mode.

-First, the USART1 and USART2 address are set to 0x1 and 0x2. The USART1 send 

-continusouly the character 0x33 to the USART2. The USART2 toggle LD1, LD2, LD3 

-and LD4 pins while receiving 0x33.

-

-When a falling edge is applied on Key Button EXTI line, an interrupt is generated

-and in the EXTI9_5_IRQHandler routine, the USART2 is entred in mute mode and still

-in this mode (no LED toggling) until a rising edge is applied on EXTI Line 0.

-In this interrupt routine the USART1 send the character of address mark (0x102)

-to wakeup USART2. The LED restart toggling.

-

-USART1 and USART2 configured as follow:

-  - BaudRate = 9600 baud  

-  - Word Length = 9 Bits

-  - One Stop Bit

-  - No parity

-  - Hardware flow control disabled (RTS and CTS signals)

-  - Receive and transmit enabled

-

-

-Directory contents

-==================

-platform_config.h    Evaluation board specific configuration file

-stm32f10x_conf.h     Library Configuration file

-stm32f10x_it.h       Interrupt handlers header file

-stm32f10x_it.c       Interrupt handlers

-main.c               Main program

-

-

-Hardware environment

-====================

-This example runs on STMicroelectronics STM3210B-EVAL and STM3210E-EVAL evaluation

-boards and can be easily tailored to any other hardware.

-To select the STMicroelectronics evaluation board used to run the example, uncomment

-the corresponding line in platform_config.h file.

-

- + STM3210B-EVAL 

-    - Connect a null-modem female/female RS232 cable between CN5 and CN6.

-    - Note: in this case USART2 Tx and Rx pins are remapped by software on 

-            PD.05 and PD.06 respectively. 

-    - Use Key push-button connected to pin PB.09 (EXTI Line9)

-    - Use Wakeup push-button connected to pin PA.00 (EXTI Line0)

-    - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08

-      and PC.09 pins             

- 

- + STM3210E-EVAL

-    - Connect a null-modem female/female RS232 cable between CN12 and CN8.

-    - Use Key push-button connected to pin PG.08 (EXTI Line8)

-    - Use Wakeup push-button connected to pin PA.00 (EXTI Line0)

-    - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF0.7, PF.08

-      and PF.09 pins

-    - Make sure that the Jumper 4 (JP4) is in position 1<-->2.    

-   

-How to use it

-=============

-In order to make the program work, you must do the following :

-- Create a project and setup all your toolchain's start-up files

-- Compile the directory content files and required Library files :

-  + stm32f10x_lib.c

-  + stm32f10x_gpio.c

-  + stm32f10x_rcc.c

-  + stm32f10x_usart.c

-  + stm32f10x_nvic.c

-  + stm32f10x_flash.c

-  + stm32f10x_exti.c

-  

-- Link all compiled files and load your image into target memory

-- Run the example

-

-******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******