Remove usb_config.h.

Move its defines into usb_cdcacm.c and usb.[hc] as appropriate.

Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>

3 files changed, 28 insertions, 17 deletions

diff --git a/libmaple/usb/usb.c b/libmaple/usb/usb.c
index 21a19db..0206bb8 100644
--- a/libmaple/usb/usb.c
+++ b/libmaple/usb/usb.c
@@ -38,7 +38,6 @@
 #include "rcc.h"
 
 #include "usb_reg_map.h"
-#include "usb_config.h"
 #include "usb_lib_globals.h"
 
 #include "usb_type.h"
@@ -109,7 +108,7 @@ void usbResumeInit(void) {
   USB_BASE->CNTR = cntr;
 
   /* Enable interrupt lines */
-  USB_BASE->CNTR = ISR_MSK;
+  USB_BASE->CNTR = USB_ISR_MSK;
 }
 
 void usbResume(RESUME_STATE eResumeSetVal) {
@@ -161,41 +160,42 @@ void usbResume(RESUME_STATE eResumeSetVal) {
     }
 }
 
+#define SUSPEND_ENABLED 1
 void __irq_usb_lp_can_rx0(void) {
   wIstr = USB_BASE->ISTR;
 
-  /* Use ISR_MSK to only include code for bits we care about. */
+  /* Use USB_ISR_MSK to only include code for bits we care about. */
 
-#if (ISR_MSK & USB_ISTR_RESET)
+#if (USB_ISR_MSK & USB_ISTR_RESET)
   if (wIstr & USB_ISTR_RESET & wInterrupt_Mask) {
     USB_BASE->ISTR = ~USB_ISTR_RESET;
     pProperty->Reset();
   }
 #endif
 
-#if (ISR_MSK & USB_ISTR_PMAOVR)
+#if (USB_ISR_MSK & USB_ISTR_PMAOVR)
   if (wIstr & ISTR_PMAOVR & wInterrupt_Mask) {
     USB_BASE->ISTR = ~USB_ISTR_PMAOVR;
   }
 #endif
 
-#if (ISR_MSK & USB_ISTR_ERR)
+#if (USB_ISR_MSK & USB_ISTR_ERR)
   if (wIstr & USB_ISTR_ERR & wInterrupt_Mask) {
     USB_BASE->ISTR = ~USB_ISTR_ERR;
   }
 #endif
 
-#if (ISR_MSK & USB_ISTR_WKUP)
+#if (USB_ISR_MSK & USB_ISTR_WKUP)
   if (wIstr & USB_ISTR_WKUP & wInterrupt_Mask) {
     USB_BASE->ISTR = ~USB_ISTR_WKUP;
     usbResume(RESUME_EXTERNAL);
   }
 #endif
 
-#if (ISR_MSK & USB_ISTR_SUSP)
+#if (USB_ISR_MSK & USB_ISTR_SUSP)
   if (wIstr & USB_ISTR_SUSP & wInterrupt_Mask) {
     /* check if SUSPEND is possible */
-    if (F_SUSPEND_ENABLED) {
+    if (SUSPEND_ENABLED) {
         usbSuspend();
     } else {
         /* if not possible then resume after xx ms */
@@ -206,14 +206,14 @@ void __irq_usb_lp_can_rx0(void) {
 }
 #endif
 
-#if (ISR_MSK & USB_ISTR_SOF)
+#if (USB_ISR_MSK & USB_ISTR_SOF)
   if (wIstr & USB_ISTR_SOF & wInterrupt_Mask) {
     USB_BASE->ISTR = ~USB_ISTR_SOF;
     bIntPackSOF++;
   }
 #endif
 
-#if (ISR_MSK & USB_ISTR_ESOF)
+#if (USB_ISR_MSK & USB_ISTR_ESOF)
   if (wIstr & USB_ISTR_ESOF & wInterrupt_Mask) {
     USB_BASE->ISTR = ~USB_ISTR_ESOF;
     /* resume handling timing is made with ESOFs */
@@ -225,13 +225,14 @@ void __irq_usb_lp_can_rx0(void) {
    * Service the correct transfer interrupt.
    */
 
-#if (ISR_MSK & USB_ISTR_CTR)
+#if (USB_ISR_MSK & USB_ISTR_CTR)
   if (wIstr & USB_ISTR_CTR & wInterrupt_Mask) {
     dispatch_ctr_lp();
   }
 #endif
 }
 
+#define RESET_DELAY                     100000
 void usbWaitReset(void) {
   delay_us(RESET_DELAY);
   nvic_sys_reset();
diff --git a/libmaple/usb/usb.h b/libmaple/usb/usb.h
index da6fa55..8ab40f0 100644
--- a/libmaple/usb/usb.h
+++ b/libmaple/usb/usb.h
@@ -34,6 +34,12 @@
 extern "C" {
 #endif
 
+#ifndef USB_ISR_MSK
+/* Handle CTRM, WKUPM, SUSPM, ERRM, SOFM, ESOFM, RESETM */
+#define USB_ISR_MSK 0xBF00
+#endif
+
+
 /*
  * Convenience routines, etc.
  */
diff --git a/libmaple/usb/usb_cdcacm.c b/libmaple/usb/usb_cdcacm.c
index 1a3b4e6..bf73c68 100644
--- a/libmaple/usb/usb_cdcacm.c
+++ b/libmaple/usb/usb_cdcacm.c
@@ -36,7 +36,6 @@
 #include "nvic.h"
 
 #include "usb.h"
-#include "usb_config.h"
 #include "descriptors.h"
 #include "usb_lib_globals.h"
 #include "usb_reg_map.h"
@@ -136,6 +135,7 @@ const USB_Descriptor_Device usbVcomDescriptor_Device = {
     .bNumConfigurations = 0x01,
 };
 
+#define MAX_POWER (100 >> 1)
 const USB_Descriptor_Config usbVcomDescriptor_Config = {
     .Config_Header = {
         .bLength              = sizeof(USB_Descriptor_Config_Header),
@@ -146,7 +146,7 @@ const USB_Descriptor_Config usbVcomDescriptor_Config = {
         .iConfiguration       = 0x00,
         .bmAttributes         = (USB_CONFIG_ATTR_BUSPOWERED |
                                  USB_CONFIG_ATTR_SELF_POWERED),
-        .bMaxPower            = USB_CONFIG_MAX_POWER,
+        .bMaxPower            = MAX_POWER,
     },
 
     .CCI_Interface = {
@@ -402,13 +402,15 @@ void usbInit(void) {
     usbPowerOn();
 
     USB_BASE->ISTR = 0;
-    wInterrupt_Mask = ISR_MSK;
+    wInterrupt_Mask = USB_ISR_MSK;
     USB_BASE->CNTR = wInterrupt_Mask;
 
     nvic_irq_enable(NVIC_USB_LP_CAN_RX0);
     bDeviceState = UNCONNECTED;
 }
 
+/* choose addresses to give endpoints the max 64 byte buffers */
+#define BTABLE_ADDRESS        0x00
 void usbReset(void) {
     pInformation->Current_Configuration = 0;
 
@@ -416,7 +418,7 @@ void usbReset(void) {
     pInformation->Current_Feature = (USB_CONFIG_ATTR_BUSPOWERED |
                                      USB_CONFIG_ATTR_SELF_POWERED);
 
-    USB_BASE->BTABLE = USB_BTABLE_ADDRESS;
+    USB_BASE->BTABLE = BTABLE_ADDRESS;
 
     /* setup control endpoint 0 */
     usb_set_ep_type(USB_EP0, USB_EP_EP_TYPE_CONTROL);
@@ -595,10 +597,12 @@ void usbSetDeviceAddress(void) {
  * Globals required by usb_lib/
  */
 
+#define NUM_ENDPTS                0x04
 DEVICE Device_Table =
     {NUM_ENDPTS,
      1};
 
+#define MAX_PACKET_SIZE            0x40  /* 64B, maximum for USB FS Devices */
 DEVICE_PROP Device_Property =
     {usbInit,
      usbReset,
@@ -611,7 +615,7 @@ DEVICE_PROP Device_Property =
      usbGetConfigDescriptor,
      usbGetStringDescriptor,
      0,
-     bMaxPacketSize};
+     MAX_PACKET_SIZE};
 
 USER_STANDARD_REQUESTS User_Standard_Requests =
     {NOP_Process,