stm32.h: Various updates, mostly to help STM32F1 line support.

Add STM32_HAVE_USB feature test macro requirement for
<series/stm32.h>. This will let us test if we've got a USB peripheral.
wirish/stm32f1/boards_setup.cpp is set up to use this when turning on
USB CDC ACM support at init() time.

Rework the STM32F1 <series/stm32.h> to make it easier to support the
various lines that subdivide that series. We don't really support
anything besides performance line yet, but there's been enough
enthusiasm for value and connectivity line support in the past that
these hooks seem worth adding. This means adding an STM32_F1_LINE
macro and STM32_F1_LINE_[PERFORMANCE,VALUE,ACCESS,CONNECTIVITY] macros
for values that STM32_F1_LINE can take, and generalizing the rest of
the file to begin taking this into account. Some TODOs remain, but
filling these in is the responsibility of future libmaple porting
efforts.

One pleasant consequence of the F1 stm32.h rework is that the build
system no longer has to tell us what density of F103 we're building
for, so remove that from the relevant support/make/board-includes/
files.

Add some tweaks to <libmaple/stm32.h> and the STM32F2 stm32.h header
to make sure this went through properly, and continues to go through
properly in the future.

1 files changed, 69 insertions, 31 deletions

diff --git a/libmaple/stm32f1/include/series/stm32.h b/libmaple/stm32f1/include/series/stm32.h
index c122df0..eaf9287 100644
--- a/libmaple/stm32f1/include/series/stm32.h
+++ b/libmaple/stm32f1/include/series/stm32.h
@@ -38,6 +38,17 @@ extern "C" {
 
 #define STM32_MCU_SERIES                STM32_SERIES_F1
 
+/* The STM32F1 series is subdivided into "lines". libmaple currently
+ * officially supports STM32F103 performance line MCUs (see the
+ * MCU-specific value section below).
+ *
+ * You can use these F1 line defines if porting libmaple to support
+ * MCUs on other lines. */
+#define STM32_F1_LINE_PERFORMANCE       0
+#define STM32_F1_LINE_VALUE             1
+#define STM32_F1_LINE_ACCESS            2
+#define STM32_F1_LINE_CONNECTIVITY      3
+
 /*
  * MCU-specific values.
  *
@@ -48,23 +59,31 @@ extern "C" {
  */
 
 #if defined(MCU_STM32F103RB)
+#   define STM32_F1_LINE                STM32_F1_LINE_PERFORMANCE
 #   define STM32_NR_GPIO_PORTS          4
 #   define STM32_SRAM_END               ((void*)0x20005000)
+#   define STM32_MEDIUM_DENSITY
 
 #elif defined(MCU_STM32F103ZE)
+#   define STM32_F1_LINE                STM32_F1_LINE_PERFORMANCE
 #   define STM32_NR_GPIO_PORTS          7
 #   define STM32_SRAM_END               ((void*)0x20010000)
+#   define STM32_HIGH_DENSITY
 
 #elif defined(MCU_STM32F103CB)
+#   define STM32_F1_LINE                STM32_F1_LINE_PERFORMANCE
     /* This STM32_NR_GPIO_PORTS is not strictly true, but only pins 0
      * and exist, and they're used for OSC (e.g. on e.g. LeafLabs
      * Maple Mini), so we'll live with this for now. */
 #   define STM32_NR_GPIO_PORTS          3
 #   define STM32_SRAM_END               ((void*)0x20005000)
+#   define STM32_MEDIUM_DENSITY
 
 #elif defined(MCU_STM32F103RE)
+#   define STM32_F1_LINE                STM32_F1_LINE_PERFORMANCE
 #   define STM32_NR_GPIO_PORTS          4
 #   define STM32_SRAM_END               ((void*)0x20010000)
+#   define STM32_HIGH_DENSITY
 
 #else
 #error "Unrecognized STM32F1 MCU, or no MCU specified. Add something like " \
@@ -72,46 +91,65 @@ extern "C" {
 #endif
 
 /*
- * Clock configuration.
+ * Derived values.
  */
 
-#ifndef STM32_PCLK1
-#define STM32_PCLK1                     36000000U
-#endif
+#if STM32_F1_LINE == STM32_F1_LINE_PERFORMANCE
+     /* All supported performance line MCUs have a USB peripheral */
+#    define STM32_HAVE_USB              1
+
+#    ifdef STM32_MEDIUM_DENSITY
+#       define STM32_NR_INTERRUPTS      43
+#       define STM32_HAVE_FSMC          0
+#    elif defined(STM32_HIGH_DENSITY)
+#       define STM32_NR_INTERRUPTS      60
+#       define STM32_HAVE_FSMC          1
+#    endif
+
+#elif STM32_F1_LINE == STM32_F1_LINE_VALUE
+     /* Value line MCUs don't have USB peripherals. */
+#    define STM32_HAVE_USB              0
+
+#    ifdef STM32_MEDIUM_DENSITY
+#        define STM32_NR_INTERRUPTS     56
+#        define STM32_HAVE_FSMC         0
+#    elif defined(STM32_HIGH_DENSITY)
+         /* 61 interrupts here counts the possibility for a remapped
+          * DMA2 channel 5 IRQ occurring at NVIC index 60.  */
+#        define STM32_NR_INTERRUPTS     61
+#        define STM32_HAVE_FSMC         1
+#    endif
 
-#ifndef STM32_PCLK2
-#define STM32_PCLK2                     72000000U
-#endif
-
-#ifndef STM32_DELAY_US_MULT
-#define STM32_DELAY_US_MULT             12 /* FIXME: value is incorrect. */
 #endif
 
 /*
- * Density-specific values.
+ * Clock configuration.
+ *
+ * We've currently got values for F103 MCUs operating at the fastest
+ * possible speeds.
+ *
+ * You can patch these for your line, MCU, clock configuration,
+ * etc. here or by setting cflags when compiling libmaple.
  */
 
-#ifdef STM32_MEDIUM_DENSITY
-#   ifndef STM32_NR_INTERRUPTS
-#   define STM32_NR_INTERRUPTS          43
-#   endif
-
-#   ifndef STM32_HAVE_FSMC
-#   define STM32_HAVE_FSMC              0
-#   endif
-
-#elif defined(STM32_HIGH_DENSITY)
-#   ifndef STM32_NR_INTERRUPTS
-#   define STM32_NR_INTERRUPTS          60
-#   endif
-
-#   ifndef STM32_HAVE_FSMC
-#   define STM32_HAVE_FSMC              1
-#   endif
+#if STM32_F1_LINE == STM32_F1_LINE_PERFORMANCE
+#    ifndef STM32_PCLK1
+#    define STM32_PCLK1                     36000000U
+#    endif
+#    ifndef STM32_PCLK2
+#    define STM32_PCLK2                     72000000U
+#    endif
+#    ifndef STM32_DELAY_US_MULT
+#    define STM32_DELAY_US_MULT             12 /* FIXME: value is incorrect. */
+#    endif
+#elif STM32_F1_LINE == STM32_F1_LINE_VALUE        /* TODO */
+#elif STM32_F1_LINE == STM32_F1_LINE_ACCESS       /* TODO */
+#elif STM32_F1_LINE == STM32_F1_LINE_CONNECTIVITY /* TODO */
+#endif
 
-#else
-#error "Unsupported STM32F1 density, or no density specified. Add something " \
-       "like -DSTM32_MEDIUM_DENSITY to your compiler arguments."
+/* Make sure we have the F1-specific defines we need. */
+#if !defined(STM32_F1_LINE)
+#error "Bad STM32F1 configuration. Check STM32F1 <series/stm32.h> header."
 #endif
 
 #ifdef __cplusplus