blob: 8804b6395a9e3226883b1406626e604780dd831e (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
|
Memory Utilization
=====================
`text` is what ends up in flash (only).
`data` is initialized variables: need to be storad in flash, then end up in RAM.
`bss` is uninitialized data: nothing in flash, but does consume RAM.
The `-x --format=sysv` flags to `arm-none-eabi-size` can be helpful.
Debugging
================
Access all registers:
(gdb) x/x 0xE000ED14
0xe000ed14: Cannot access memory at address 0xe000ed14
(gdb)
0xe000ed18: Cannot access memory at address 0xe000ed18
(gdb) show mem inaccessible-by-default
Unknown memory addresses will be treated as inaccessible.
(gdb) set mem inaccessible-by-default off
(gdb) x/x 0xE000ED14
0xe000ed14: 0x00000200
Uploading via SWD
====================
`upload_blackmagic.sh`:
#!/bin/bash
arm-none-eabi-gdb build/stm32f401cc_project.elf < load_blackmagic.gdb
sleep 1.0
`load_blackmagic.gdb`:
target extended-remote /dev/ttyACM0
monitor swdp_scan
attach 1
load
quit
References
=============
Keil Application Note 209: Using Cortex-M3 and Cortex-M4 Fault Exceptions
[ARM Cortex-M3 HardFault Status Register Documentation](http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0553a/Cihdjcfc.html)
"STM32/ARM Cortex-M3 HOWTO: Development under Ubuntu (Debian)" ([fun-tech.se](http://fun-tech.se/stm32/))
|
