diff options
| author | Thiago Jung Bauermann <thiago.bauermann@gmail.com> | 2012-05-30 23:33:10 -0300 |
|---|---|---|
| committer | Thiago Jung Bauermann <thiago.bauermann@gmail.com> | 2012-05-30 23:33:10 -0300 |
| commit | b6be6e02f9bdecfb00b1264d7dfdf453badaba34 (patch) | |
| tree | fc3000dc60968166cc268864d2357d58ee1544cc | |
| download | dreamplug-libertas_uap-b6be6e02f9bdecfb00b1264d7dfdf453badaba34.tar.gz dreamplug-libertas_uap-b6be6e02f9bdecfb00b1264d7dfdf453badaba34.zip | |
Initial commit.
| -rw-r--r-- | README | 52 | ||||
| -rw-r--r-- | config-3.4.0-1bauer2-kirkwood | 4176 | ||||
| -rw-r--r-- | with-linux-3.4/0002-Driver-for-Marvell-Libertas-8688-SDIO-micro-AP-suppo-3.2.patch | 31 | ||||
| -rw-r--r-- | with-linux-3.4/dreamplug-3.4.0.patch | 107 | ||||
| -rw-r--r-- | with-linux-3.4/linux-3.0-SDIO-micro-AP.patch | 5111 | ||||
| -rw-r--r-- | with-linux-3.4/linux-3.0.4-LIBERTAS-WEXT_PRIV.patch | 10 | ||||
| -rw-r--r-- | with-linux-3.4/mvsdio-1-2.6.30.patch | 18 | ||||
| -rw-r--r-- | with-linux-3.4/mvsdio-2.patch | 35 | ||||
| -rw-r--r-- | with-linux-3.4/mvsdio-3.patch | 13 | ||||
| -rw-r--r-- | with-linux-3.4/phys-virt.diff | 14 | ||||
| -rw-r--r-- | with-linux-3.4/series | 8 |
11 files changed, 9575 insertions, 0 deletions
@@ -0,0 +1,52 @@ +Patches in with-linux-3.4 +========================= + +These patches were adapted to apply on Linux 3.4 from the ones found here: + +http://sheeva.with-linux.com/sheeva/kernel/3/3.2/3.2.9/source/ + +They assume the Dreamplug has the original u-boot shipped by Marvel. This +means that the kernel will expect it to report the Guruplug machine id +2659 instead of the official 3550, and it assumes u-boot doesn't provide +a flattened device tree. If your u-boot uses the Dreamplug id then you +can just remove the section about linux-3.4/arch/arm/tools/mach-types +from dreamplug-3.4.0.patch. If it also provides a flattened device tree, +then you don't need dreamplug-3.4.0.patch at all. + +Using the kernel patches +------------------------ + +Instructions based on freedom-maker's README [1]. + +To compile your own kernel, you can use config-3.4.0-1bauer2-kirkwood as basis. +Follow the following steps on the DreamPlug to compile a new kernel: + + 1. Get the kernel source and other needed packages. + # apt-get kernel-package lzma quilt + 2. Get the Linux 3.4 kernel. + # wget https://www.kernel.org/pub/linux/kernel/v3.0/linux-3.4.tar.bz2 + 2. Unpack it somewhere. + # tar xfj linux-3.4.tar.bz2 + 3. Apply the patches found in with-linux-3.4. + # cd linux-3.4 + # ln -s ../with-linux-3.4 patches + # quilt push -a + 4. Copy the config and compile. + # cp ../config-3.4.0-1bauer2-kirkwood .config + # make-kpkg clean + # make-kpkg --append-to-version -1bauer2-kirkwood --revision=3.4.0-1bauer2 --initrd --cross_compile=- kernel_image kernel_headers + 5. Install the packages. + # dpkg -i ../linux-{image,headers}-3.4.0-1bauer2-kirkwood_3.4.0-1bauer2_armel.deb + +After kernel is installed on device, hooks should be calling: + # flash-kernel 3.4.0-1bauer2-kirkwood + +After that you should get a uImage and uInitrd files under /boot. + +These packages should get a kernel up and running into DreamPlug device. +The compilation process takes 6 hours on the DreamPlug. You will need +approximately 1 GB of free space for the build (including the size of the +unpacked kernel source). + +-- +[1] http://anonscm.debian.org/git/freedombox/freedom-maker.git/ diff --git a/config-3.4.0-1bauer2-kirkwood b/config-3.4.0-1bauer2-kirkwood new file mode 100644 index 0000000..6090489 --- /dev/null +++ b/config-3.4.0-1bauer2-kirkwood @@ -0,0 +1,4176 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm 3.4.0-1bauer2-kirkwood Kernel Configuration +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_USES_GETTIMEOFFSET is not set +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_KTIME_SCALAR=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_VECTORS_BASE=0xffff0000 +# CONFIG_ARM_PATCH_PHYS_VIRT is not set +CONFIG_NEED_MACH_IO_H=y +CONFIG_PHYS_OFFSET=0x0 +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_HAVE_IRQ_WORK=y +CONFIG_IRQ_WORK=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_XZ is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_FHANDLE=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y +# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set +CONFIG_HAVE_GENERIC_HARDIRQS=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_CHIP=y + +# +# RCU Subsystem +# +CONFIG_TINY_RCU=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=19 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_MEM_RES_CTLR=y +CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y +# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set +# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set +# CONFIG_CGROUP_PERF is not set +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_CFS_BANDWIDTH is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +# CONFIG_CHECKPOINT_RESTORE is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_MM_OWNER=y +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EXPERT=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_TRACEPOINTS=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_JUMP_LABEL is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +# CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_DEV_THROTTLING is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +CONFIG_ACORN_PARTITION=y +# CONFIG_ACORN_PARTITION_CUMANA is not set +# CONFIG_ACORN_PARTITION_EESOX is not set +CONFIG_ACORN_PARTITION_ICS=y +# CONFIG_ACORN_PARTITION_ADFS is not set +# CONFIG_ACORN_PARTITION_POWERTEC is not set +CONFIG_ACORN_PARTITION_RISCIX=y +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y +# CONFIG_LDM_DEBUG is not set +CONFIG_SGI_PARTITION=y +CONFIG_ULTRIX_PARTITION=y +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_CFQ_GROUP_IOSCHED=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_HIGHBANK is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_PRIMA2 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_MXS is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_DOVE is not set +CONFIG_ARCH_KIRKWOOD=y +# CONFIG_ARCH_LPC32XX is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_PICOXCELL is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C24XX is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P64X0 is not set +# CONFIG_ARCH_S5PC100 is not set +# CONFIG_ARCH_S5PV210 is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set +# CONFIG_ARCH_VT8500 is not set +# CONFIG_ARCH_ZYNQ is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_KEYBOARD_GPIO_POLLED is not set + +# +# Marvell Kirkwood Implementations +# +# CONFIG_MACH_DB88F6281_BP is not set +# CONFIG_MACH_RD88F6192_NAS is not set +# CONFIG_MACH_RD88F6281 is not set +# CONFIG_MACH_MV88F6281GTW_GE is not set +# CONFIG_MACH_SHEEVAPLUG is not set +# CONFIG_MACH_ESATA_SHEEVAPLUG is not set +# CONFIG_MACH_GURUPLUG is not set +CONFIG_MACH_DREAMPLUG=y +# CONFIG_ARCH_KIRKWOOD_DT is not set +# CONFIG_MACH_DREAMPLUG_DT is not set +# CONFIG_MACH_TS219 is not set +# CONFIG_MACH_TS41X is not set +# CONFIG_MACH_DOCKSTAR is not set +# CONFIG_MACH_OPENRD_BASE is not set +# CONFIG_MACH_OPENRD_CLIENT is not set +# CONFIG_MACH_OPENRD_ULTIMATE is not set +# CONFIG_MACH_NETSPACE_V2 is not set +# CONFIG_MACH_INETSPACE_V2 is not set +# CONFIG_MACH_NETSPACE_MAX_V2 is not set +# CONFIG_MACH_D2NET_V2 is not set +# CONFIG_MACH_NET2BIG_V2 is not set +# CONFIG_MACH_NET5BIG_V2 is not set +# CONFIG_MACH_T5325 is not set + +# +# System MMU +# +CONFIG_PLAT_ORION=y + +# +# Processor Type +# +CONFIG_CPU_FEROCEON=y +# CONFIG_CPU_FEROCEON_OLD_ID is not set +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_FEROCEON=y +CONFIG_CPU_TLB_FEROCEON=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_USE_DOMAINS=y + +# +# Processor Features +# +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_OUTER_CACHE=y +CONFIG_CACHE_FEROCEON_L2=y +# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set +# CONFIG_CACHE_L2X0 is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_NR_BANKS=8 + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_SYSCALL=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_ARCH_NR_GPIO=0 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HAVE_ARCH_PFN_VALID=y +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=999999 +# CONFIG_COMPACTION is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=32768 +CONFIG_NEED_PER_CPU_KM=y +# CONFIG_CLEANCACHE is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_ALIGNMENT_TRAP=y +CONFIG_UACCESS_WITH_MEMCPY=y +# CONFIG_SECCOMP is not set +# CONFIG_CC_STACKPROTECTOR is not set +# CONFIG_DEPRECATED_PARAM_STRUCT is not set + +# +# Boot options +# +# CONFIG_USE_OF is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_AUTO_ZRELADDR is not set + +# +# CPU Power Management +# +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM_RUNTIME=y +CONFIG_PM=y +CONFIG_PM_DEBUG=y +CONFIG_PM_ADVANCED_DEBUG=y +# CONFIG_APM_EMULATION is not set +CONFIG_CPU_PM=y +# CONFIG_ARM_CPU_SUSPEND is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_UNIX=y +# CONFIG_UNIX_DIAG is not set +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +# CONFIG_IP_FIB_TRIE_STATS is not set +CONFIG_IP_MULTIPLE_TABLES=y +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_ROUTE_CLASSID=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_UDP_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +CONFIG_IPV6_MULTIPLE_TABLES=y +# CONFIG_IPV6_SUBTREES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETLABEL is not set +CONFIG_NETWORK_SECMARK=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +# CONFIG_NETFILTER_NETLINK_ACCT is not set +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_SECMARK is not set +# CONFIG_NF_CONNTRACK_ZONES is not set +CONFIG_NF_CONNTRACK_PROCFS=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +# CONFIG_NF_CONNTRACK_TIMEOUT is not set +# CONFIG_NF_CONNTRACK_TIMESTAMP is not set +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +# CONFIG_NF_CONNTRACK_SNMP is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NF_CT_NETLINK_TIMEOUT is not set +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m + +# +# Xtables targets +# +# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ECN=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_IP_SET is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_SECURITY is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +# CONFIG_IP6_NF_QUEUE is not set +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +# CONFIG_IP6_NF_SECURITY is not set +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +# CONFIG_IP_DCCP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_L2TP=m +# CONFIG_L2TP_DEBUGFS is not set +# CONFIG_L2TP_V3 is not set +CONFIG_STP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_NET_DSA=m +# CONFIG_NET_DSA_TAG_DSA is not set +# CONFIG_NET_DSA_TAG_EDSA is not set +# CONFIG_NET_DSA_TAG_TRAILER is not set +CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +# CONFIG_IPDDP is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +# CONFIG_NET_SCH_SFB is not set +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +# CONFIG_NET_SCH_MQPRIO is not set +# CONFIG_NET_SCH_CHOKE is not set +# CONFIG_NET_SCH_QFQ is not set +# CONFIG_NET_SCH_INGRESS is not set +# CONFIG_NET_SCH_PLUG is not set + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=y +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +# CONFIG_NET_ACT_SKBEDIT is not set +CONFIG_NET_ACT_CSUM=m +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +# CONFIG_OPENVSWITCH is not set +CONFIG_NETPRIO_CGROUP=m +CONFIG_BQL=y +CONFIG_HAVE_BPF_JIT=y +# CONFIG_BPF_JIT is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +# CONFIG_BT_HCIUART_H4 is not set +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_ATH3K is not set +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m +CONFIG_BT_WILINK=m +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +CONFIG_RXKAD=m +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_WEXT_PRIV=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_WEP=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +CONFIG_MAC80211_MESH=y +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_REGULATOR is not set +CONFIG_NET_9P=m +# CONFIG_NET_9P_DEBUG is not set +# CONFIG_CAIF is not set +CONFIG_CEPH_LIB=m +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set +# CONFIG_NFC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=m +CONFIG_REGMAP_SPI=m +# CONFIG_DMA_SHARED_BUFFER is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_AR7_PARTS=m + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_FTL=m +CONFIG_NFTL=m +# CONFIG_NFTL_RW is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +CONFIG_MTD_SWAP=m + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI_I4=y +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=m +CONFIG_MTD_CFI_STAA=m +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +CONFIG_MTD_DATAFLASH=m +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +CONFIG_MTD_M25P80=y +CONFIG_M25PXX_USE_FAST_READ=y +CONFIG_MTD_SST25L=m +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_DOCG3 is not set +CONFIG_MTD_NAND_ECC=y +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_BCH is not set +CONFIG_MTD_SM_COMMON=m +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_DENALI is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_RICOH=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_DOCG4 is not set +# CONFIG_MTD_NAND_CAFE is not set +CONFIG_MTD_NAND_NANDSIM=m +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_ORION=y +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +CONFIG_MTD_LPDDR=m +CONFIG_MTD_QINFO_PROBE=m +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set +# CONFIG_MTD_UBI_DEBUG is not set +CONFIG_PARPORT=m +# CONFIG_PARPORT_PC is not set +# CONFIG_PARPORT_GSC is not set +CONFIG_PARPORT_AX88796=m +CONFIG_PARPORT_1284=y +CONFIG_PARPORT_NOT_PC=y +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_DRBD=m +# CONFIG_DRBD_FAULT_INJECTION is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_NVME is not set +CONFIG_BLK_DEV_OSD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=m +# CONFIG_MG_DISK is not set +CONFIG_BLK_DEV_RBD=m + +# +# Misc devices +# +CONFIG_SENSORS_LIS3LV02D=m +CONFIG_AD525X_DPOT=m +CONFIG_AD525X_DPOT_I2C=m +CONFIG_AD525X_DPOT_SPI=m +# CONFIG_PHANTOM is not set +# CONFIG_INTEL_MID_PTI is not set +CONFIG_SGI_IOC4=m +CONFIG_TIFM_CORE=m +CONFIG_TIFM_7XX1=m +CONFIG_ICS932S401=m +CONFIG_ENCLOSURE_SERVICES=m +# CONFIG_HP_ILO is not set +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_ISL29020=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_BH1780=m +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m +CONFIG_HMC6352=m +CONFIG_DS1682=m +CONFIG_TI_DAC7512=m +CONFIG_BMP085=m +# CONFIG_PCH_PHUB is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +CONFIG_C2PORT=m + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_AT25=m +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93CX6=m +# CONFIG_EEPROM_93XX46 is not set +CONFIG_CB710_CORE=m +# CONFIG_CB710_DEBUG is not set +CONFIG_CB710_DEBUG_ASSUMPTIONS=y +CONFIG_IWMC3200TOP=m +# CONFIG_IWMC3200TOP_DEBUG is not set +# CONFIG_IWMC3200TOP_DEBUGFS is not set + +# +# Texas Instruments shared transport line discipline +# +CONFIG_TI_ST=m +# CONFIG_SENSORS_LIS3_SPI is not set +CONFIG_SENSORS_LIS3_I2C=m + +# +# Altera FPGA firmware download module +# +# CONFIG_ALTERA_STAPL is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +CONFIG_SCSI_NETLINK=y +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_FC_TGT_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m +CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_SCSI_CXGB4_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_SCSI_BNX2X_FCOE=m +CONFIG_BE2ISCSI=m +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +CONFIG_SCSI_HPSA=m +# CONFIG_SCSI_3W_9XXX is not set +CONFIG_SCSI_3W_SAS=m +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +CONFIG_SCSI_MVUMI=m +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +# CONFIG_SCSI_MPT2SAS_LOGGING is not set +# CONFIG_SCSI_UFSHCD is not set +# CONFIG_SCSI_HPTIOP is not set +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +CONFIG_FCOE=m +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +CONFIG_SCSI_PMCRAID=m +CONFIG_SCSI_PM8001=m +CONFIG_SCSI_SRP=m +CONFIG_SCSI_BFA_FC=m +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=m +# CONFIG_SATA_AHCI_PLATFORM is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +# CONFIG_ATA_PIIX is not set +CONFIG_SATA_MV=y +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARASAN_CF is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CS5536 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_LEGACY is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +# CONFIG_DM_THIN_PROVISIONING is not set +CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y +# CONFIG_DM_FLAKEY is not set +# CONFIG_DM_VERITY is not set +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m +CONFIG_LOOPBACK_TARGET=m +CONFIG_TCM_FC=m +# CONFIG_ISCSI_TARGET is not set +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +CONFIG_FUSION_FC=m +CONFIG_FUSION_SAS=m +CONFIG_FUSION_MAX_SGE=128 +CONFIG_FUSION_CTL=m +# CONFIG_FUSION_LOGGING is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_FIREWIRE=m +CONFIG_FIREWIRE_OHCI=m +CONFIG_FIREWIRE_SBP2=m +CONFIG_FIREWIRE_NET=m +CONFIG_FIREWIRE_NOSY=m +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +CONFIG_NET_CORE=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +# CONFIG_NET_FC is not set +CONFIG_MII=m +CONFIG_IFB=m +# CONFIG_NET_TEAM is not set +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +CONFIG_TUN=m +CONFIG_VETH=m +# CONFIG_ARCNET is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +# CONFIG_NET_DSA_MV88E6XXX is not set +# CONFIG_NET_DSA_MV88E6060 is not set +# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set +# CONFIG_NET_DSA_MV88E6131 is not set +# CONFIG_NET_DSA_MV88E6123_61_65 is not set +CONFIG_ETHERNET=y +CONFIG_MDIO=m +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_ATHEROS is not set +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +CONFIG_BNX2=m +CONFIG_CNIC=m +# CONFIG_TIGON3 is not set +# CONFIG_BNX2X is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_CALXEDA_XGMAC is not set +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3=m +CONFIG_CHELSIO_T4=m +# CONFIG_CHELSIO_T4VF is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_CISCO is not set +# CONFIG_DM9000 is not set +# CONFIG_DNET is not set +# CONFIG_NET_VENDOR_DEC is not set +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EXAR is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_IP1000 is not set +# CONFIG_JME is not set +CONFIG_NET_VENDOR_MARVELL=y +CONFIG_MV643XX_ETH=y +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +CONFIG_NET_VENDOR_MELLANOX=y +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_MYRI is not set +# CONFIG_FEALNX is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +# CONFIG_ETHOC is not set +# CONFIG_NET_PACKET_ENGINE is not set +# CONFIG_NET_VENDOR_QLOGIC is not set +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_SFC is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_AMD_PHY is not set +CONFIG_MARVELL_PHY=m +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=m +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_BROADCOM_PHY=m +# CONFIG_ICPLUS_PHY is not set +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +# CONFIG_MICREL_KS8995MA is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLHC=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_TR is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +CONFIG_WLAN=y +CONFIG_LIBERTAS_THINFIRM=m +# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_LIBERTAS_UAP=m +# CONFIG_ATMEL is not set +CONFIG_AT76C50X_USB=m +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_RTL8180=m +CONFIG_RTL8187=m +CONFIG_RTL8187_LEDS=y +CONFIG_ADM8211=m +CONFIG_MAC80211_HWSIM=m +CONFIG_MWL8K=m +CONFIG_ATH_COMMON=m +# CONFIG_ATH_DEBUG is not set +CONFIG_ATH5K=m +# CONFIG_ATH5K_DEBUG is not set +# CONFIG_ATH5K_TRACER is not set +CONFIG_ATH5K_PCI=y +CONFIG_ATH9K_HW=m +CONFIG_ATH9K_COMMON=m +CONFIG_ATH9K_BTCOEX_SUPPORT=y +CONFIG_ATH9K=m +CONFIG_ATH9K_PCI=y +# CONFIG_ATH9K_AHB is not set +# CONFIG_ATH9K_DEBUGFS is not set +# CONFIG_ATH9K_DFS_CERTIFIED is not set +CONFIG_ATH9K_RATE_CONTROL=y +CONFIG_ATH9K_HTC=m +# CONFIG_ATH9K_HTC_DEBUGFS is not set +CONFIG_CARL9170=m +CONFIG_CARL9170_LEDS=y +CONFIG_CARL9170_WPC=y +# CONFIG_CARL9170_HWRNG is not set +CONFIG_ATH6KL=m +CONFIG_ATH6KL_SDIO=m +CONFIG_ATH6KL_USB=m +# CONFIG_ATH6KL_DEBUG is not set +CONFIG_B43=m +CONFIG_B43_SSB=y +CONFIG_B43_PCI_AUTOSELECT=y +CONFIG_B43_PCICORE_AUTOSELECT=y +CONFIG_B43_SDIO=y +CONFIG_B43_PIO=y +CONFIG_B43_PHY_N=y +CONFIG_B43_PHY_LP=y +# CONFIG_B43_PHY_HT is not set +CONFIG_B43_LEDS=y +CONFIG_B43_HWRNG=y +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +CONFIG_B43LEGACY_PCI_AUTOSELECT=y +CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +CONFIG_B43LEGACY_LEDS=y +CONFIG_B43LEGACY_HWRNG=y +CONFIG_B43LEGACY_DEBUG=y +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_BRCMUTIL=m +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_SDIO=y +CONFIG_BRCMFMAC_USB=y +# CONFIG_BRCMDBG is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_IPW2100=m +# CONFIG_IPW2100_MONITOR is not set +# CONFIG_IPW2100_DEBUG is not set +CONFIG_IPW2200=m +CONFIG_IPW2200_MONITOR=y +CONFIG_IPW2200_RADIOTAP=y +CONFIG_IPW2200_PROMISCUOUS=y +CONFIG_IPW2200_QOS=y +# CONFIG_IPW2200_DEBUG is not set +CONFIG_LIBIPW=m +# CONFIG_LIBIPW_DEBUG is not set +CONFIG_IWLWIFI=m + +# +# Debugging Options +# +# CONFIG_IWLWIFI_DEBUG is not set +# CONFIG_IWLWIFI_DEVICE_TRACING is not set +# CONFIG_IWLWIFI_P2P is not set +# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set +CONFIG_IWLEGACY=m +CONFIG_IWL4965=m +CONFIG_IWL3945=m + +# +# iwl3945 / iwl4965 Debugging Options +# +# CONFIG_IWLEGACY_DEBUG is not set +CONFIG_IWM=m +# CONFIG_IWM_DEBUG is not set +# CONFIG_IWM_TRACING is not set +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_LIBERTAS_MESH=y +CONFIG_HERMES=m +CONFIG_HERMES_PRISM=y +CONFIG_HERMES_CACHE_FW_ON_INIT=y +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set +# CONFIG_PCI_HERMES is not set +CONFIG_ORINOCO_USB=m +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +CONFIG_P54_PCI=m +CONFIG_P54_SPI=m +# CONFIG_P54_SPI_DEFAULT_EEPROM is not set +CONFIG_P54_LEDS=y +CONFIG_RT2X00=m +CONFIG_RT2400PCI=m +CONFIG_RT2500PCI=m +CONFIG_RT61PCI=m +CONFIG_RT2800PCI=m +CONFIG_RT2800PCI_RT33XX=y +CONFIG_RT2800PCI_RT35XX=y +CONFIG_RT2800PCI_RT53XX=y +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT33XX=y +CONFIG_RT2800USB_RT35XX=y +CONFIG_RT2800USB_RT53XX=y +# CONFIG_RT2800USB_UNKNOWN is not set +CONFIG_RT2800_LIB=m +CONFIG_RT2X00_LIB_PCI=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set +CONFIG_RTL8192CE=m +CONFIG_RTL8192SE=m +# CONFIG_RTL8192DE is not set +CONFIG_RTL8192CU=m +CONFIG_RTLWIFI=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8192C_COMMON=m +CONFIG_WL1251=m +CONFIG_WL1251_SPI=m +CONFIG_WL1251_SDIO=m +CONFIG_WL12XX_MENU=m +CONFIG_WL12XX=m +CONFIG_WL12XX_SPI=m +CONFIG_WL12XX_SDIO=m +CONFIG_WL12XX_PLATFORM_DATA=y +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +# CONFIG_MWIFIEX_PCIE is not set + +# +# WiMAX Wireless Broadband devices +# +CONFIG_WIMAX_I2400M=m +CONFIG_WIMAX_I2400M_USB=m +CONFIG_WIMAX_I2400M_SDIO=m +CONFIG_WIMAX_IWMC3200_SDIO=y +CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 +# CONFIG_WAN is not set +# CONFIG_VMXNET3 is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=m +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +CONFIG_KEYBOARD_LM8323=m +CONFIG_KEYBOARD_MAX7359=m +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_OPENCORES=m +CONFIG_KEYBOARD_STOWAWAY=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_OMAP4 is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_SENTELIC=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +CONFIG_MOUSE_APPLETOUCH=m +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MOUSE_SYNAPTICS_USB is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_MPU3050 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_TILT_POLLED is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_PCF50633_PMU is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_CMA3000 is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_NOZOMI=m +CONFIG_N_GSM=m +# CONFIG_TRACE_SINK is not set +# CONFIG_DEVKMEM is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_MAX3100=m +# CONFIG_SERIAL_MAX3107 is not set +CONFIG_SERIAL_MFD_HSU=m +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +# CONFIG_SERIAL_PCH_UART is not set +# CONFIG_SERIAL_XILINX_PS_UART is not set +# CONFIG_TTY_PRINTK is not set +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +# CONFIG_HVC_DCC is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_TIMERIOMEM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_RAMOOPS=m +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m +# CONFIG_I2C_MUX is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +CONFIG_I2C_ISCH=m +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE_PCI is not set +# CONFIG_I2C_EG20T is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_INTEL_MID is not set +CONFIG_I2C_MV64XXX=y +CONFIG_I2C_OCORES=m +CONFIG_I2C_PCA_PLATFORM=m +# CONFIG_I2C_PXA_PCI is not set +CONFIG_I2C_SIMTEC=m +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +CONFIG_I2C_DIOLAN_U2C=m +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +CONFIG_SPI_BITBANG=m +CONFIG_SPI_BUTTERFLY=m +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_LM70_LLP=m +# CONFIG_SPI_OC_TINY is not set +CONFIG_SPI_ORION=y +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_TOPCLIFF_PCH is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +CONFIG_SPI_TLE62X0=m +# CONFIG_HSI is not set + +# +# PPS support +# +CONFIG_PPS=m +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +# CONFIG_PPS_CLIENT_GPIO is not set + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=m + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO drivers: +# +# CONFIG_GPIO_GENERIC_PLATFORM is not set +# CONFIG_GPIO_VX855 is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_SX150X is not set +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_74X164 is not set + +# +# AC97 GPIO expanders: +# + +# +# MODULbus GPIO expanders: +# +CONFIG_W1=m +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +CONFIG_W1_MASTER_MATROX=m +CONFIG_W1_MASTER_DS2490=m +CONFIG_W1_MASTER_DS2482=m +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=m +CONFIG_W1_SLAVE_SMEM=m +# CONFIG_W1_SLAVE_DS2408 is not set +# CONFIG_W1_SLAVE_DS2423 is not set +CONFIG_W1_SLAVE_DS2431=m +CONFIG_W1_SLAVE_DS2433=m +# CONFIG_W1_SLAVE_DS2433_CRC is not set +CONFIG_W1_SLAVE_DS2760=m +# CONFIG_W1_SLAVE_DS2780 is not set +# CONFIG_W1_SLAVE_DS2781 is not set +CONFIG_W1_SLAVE_BQ27000=m +CONFIG_POWER_SUPPLY=m +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_TEST_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +CONFIG_BATTERY_DS2782=m +# CONFIG_BATTERY_SBS is not set +CONFIG_BATTERY_BQ27x00=m +CONFIG_BATTERY_BQ27X00_I2C=y +CONFIG_BATTERY_BQ27X00_PLATFORM=y +CONFIG_BATTERY_MAX17040=m +# CONFIG_BATTERY_MAX17042 is not set +CONFIG_CHARGER_PCF50633=m +# CONFIG_CHARGER_ISP1704 is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_MANAGER is not set +# CONFIG_CHARGER_SMB347 is not set +CONFIG_HWMON=m +CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7314 is not set +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +CONFIG_SENSORS_ADCXX=m +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +CONFIG_SENSORS_ADM1029=m +# CONFIG_SENSORS_ADM1031 is not set +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +# CONFIG_SENSORS_DS1621 is not set +CONFIG_SENSORS_I5K_AMB=m +# CONFIG_SENSORS_F71805F is not set +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_G760A=m +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_GPIO_FAN is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_JC42 is not set +CONFIG_SENSORS_LINEAGE=m +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM70=m +CONFIG_SENSORS_LM73=m +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +CONFIG_SENSORS_LTC4245=m +CONFIG_SENSORS_LTC4261=m +CONFIG_SENSORS_LM95241=m +# CONFIG_SENSORS_LM95245 is not set +CONFIG_SENSORS_MAX1111=m +CONFIG_SENSORS_MAX16065=m +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX1668 is not set +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m +# CONFIG_SENSORS_MCP3021 is not set +# CONFIG_SENSORS_NTC_THERMISTOR is not set +# CONFIG_SENSORS_PC87360 is not set +CONFIG_SENSORS_PC87427=m +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_PMBUS is not set +# CONFIG_SENSORS_SHT15 is not set +CONFIG_SENSORS_SHT21=m +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMM665 is not set +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_EMC1403=m +# CONFIG_SENSORS_EMC2103 is not set +CONFIG_SENSORS_EMC6W201=m +# CONFIG_SENSORS_SMSC47M1 is not set +CONFIG_SENSORS_SMSC47M192=m +# CONFIG_SENSORS_SMSC47B397 is not set +CONFIG_SENSORS_SCH56XX_COMMON=m +CONFIG_SENSORS_SCH5627=m +# CONFIG_SENSORS_SCH5636 is not set +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_ADS7871=m +CONFIG_SENSORS_AMC6821=m +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=m +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +# CONFIG_SENSORS_VIA686A is not set +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_VT8231=m +# CONFIG_SENSORS_W83781D is not set +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +# CONFIG_SENSORS_W83795_FANCTRL is not set +# CONFIG_SENSORS_W83L785TS is not set +CONFIG_SENSORS_W83L786NG=m +# CONFIG_SENSORS_W83627HF is not set +CONFIG_SENSORS_W83627EHF=m +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_ORION_WATCHDOG=m +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=m +CONFIG_SSB_SPROM=y +CONFIG_SSB_BLOCKIO=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_B43_PCI_BRIDGE=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +CONFIG_SSB_SDIOHOST=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +# CONFIG_BCMA is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=m +# CONFIG_MFD_88PM860X is not set +CONFIG_MFD_SM501=m +# CONFIG_MFD_SM501_GPIO is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +CONFIG_HTC_PASIC3=m +# CONFIG_HTC_I2CPLD is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS6105X is not set +CONFIG_TPS65010=m +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65217 is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_STMPE is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_S5M_CORE is not set +CONFIG_MFD_WM8400=m +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_MFD_PCF50633=m +CONFIG_PCF50633_ADC=m +CONFIG_PCF50633_GPIO=m +# CONFIG_MFD_MC13XXX is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_TIMBERDALE is not set +CONFIG_LPC_SCH=m +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_VX855 is not set +CONFIG_MFD_WL1273_CORE=m +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_RC5T583 is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_DUMMY is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=m +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +CONFIG_REGULATOR_USERSPACE_CONSUMER=m +# CONFIG_REGULATOR_GPIO is not set +# CONFIG_REGULATOR_AD5398 is not set +# CONFIG_REGULATOR_ISL6271A is not set +CONFIG_REGULATOR_MAX1586=m +CONFIG_REGULATOR_MAX8649=m +CONFIG_REGULATOR_MAX8660=m +# CONFIG_REGULATOR_MAX8952 is not set +CONFIG_REGULATOR_LP3971=m +# CONFIG_REGULATOR_LP3972 is not set +CONFIG_REGULATOR_PCF50633=m +# CONFIG_REGULATOR_TPS62360 is not set +CONFIG_REGULATOR_TPS65023=m +CONFIG_REGULATOR_TPS6507X=m +# CONFIG_REGULATOR_TPS6524X is not set +CONFIG_REGULATOR_WM8400=m +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +# CONFIG_VIDEO_V4L2_SUBDEV_API is not set +CONFIG_DVB_CORE=m +CONFIG_DVB_NET=y +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_RC_CORE=m +CONFIG_LIRC=m +CONFIG_RC_MAP=m +CONFIG_IR_NEC_DECODER=m +CONFIG_IR_RC5_DECODER=m +CONFIG_IR_RC6_DECODER=m +CONFIG_IR_JVC_DECODER=m +CONFIG_IR_SONY_DECODER=m +CONFIG_IR_RC5_SZ_DECODER=m +CONFIG_IR_SANYO_DECODER=m +CONFIG_IR_MCE_KBD_DECODER=m +CONFIG_IR_LIRC_CODEC=m +# CONFIG_RC_ATI_REMOTE is not set +CONFIG_IR_IMON=m +CONFIG_IR_MCEUSB=m +CONFIG_IR_REDRAT3=m +CONFIG_IR_STREAMZAP=m +CONFIG_RC_LOOPBACK=m +# CONFIG_IR_GPIO_CIR is not set +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m +CONFIG_MEDIA_TUNER_TDA18212=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEOBUF_DVB=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEOBUF2_CORE=m +CONFIG_VIDEOBUF2_MEMOPS=m +CONFIG_VIDEOBUF2_VMALLOC=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_IR_I2C=m + +# +# Audio decoders, processors and mixers +# +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m + +# +# RDS decoders +# + +# +# Video decoders +# +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_TVP5150=m + +# +# Video and audio decoders +# +CONFIG_VIDEO_CX25840=m + +# +# MPEG video encoders +# +CONFIG_VIDEO_CX2341X=m + +# +# Video encoders +# + +# +# Camera sensor devices +# +CONFIG_VIDEO_MT9V011=m + +# +# Flash devices +# + +# +# Video improvement chips +# + +# +# Miscelaneous helper chips +# +CONFIG_VIDEO_VIVI=m +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +# CONFIG_USB_GSPCA_JL2005BCD is not set +CONFIG_USB_GSPCA_KINECT=m +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +# CONFIG_USB_GSPCA_SE401 is not set +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +# CONFIG_USB_GSPCA_TOPRO is not set +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_EM28XX=m +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_EM28XX_DVB=m +# CONFIG_VIDEO_EM28XX_RC is not set +CONFIG_VIDEO_TLG2300=m +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_RC=y +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m +# CONFIG_VIDEO_TM6000 is not set +CONFIG_VIDEO_USBVISION=m +CONFIG_USB_ET61X251=m +CONFIG_USB_SN9C102=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +CONFIG_VIDEO_CPIA2=m +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +# CONFIG_V4L_PCI_DRIVERS is not set +# CONFIG_V4L_ISA_PARPORT_DRIVERS is not set +# CONFIG_V4L_PLATFORM_DRIVERS is not set +CONFIG_V4L_MEM2MEM_DRIVERS=y +# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_SI470X=y +CONFIG_USB_SI470X=m +CONFIG_I2C_SI470X=m +CONFIG_USB_MR800=m +# CONFIG_USB_DSBR is not set +# CONFIG_RADIO_MAXIRADIO is not set +CONFIG_I2C_SI4713=m +CONFIG_RADIO_SI4713=m +# CONFIG_USB_KEENE is not set +CONFIG_RADIO_TEA5764=m +CONFIG_RADIO_SAA7706H=m +CONFIG_RADIO_TEF6862=m +CONFIG_RADIO_WL1273=m + +# +# Texas Instruments WL128x FM driver (ST based) +# +CONFIG_RADIO_WL128X=m +CONFIG_DVB_MAX_ADAPTERS=8 +CONFIG_DVB_DYNAMIC_MINORS=y +CONFIG_DVB_CAPTURE_DRIVERS=y + +# +# Supported SAA7146 based PCI Adapters +# +CONFIG_TTPCI_EEPROM=m +CONFIG_DVB_AV7110=m +CONFIG_DVB_AV7110_OSD=y +CONFIG_DVB_BUDGET_CORE=m +CONFIG_DVB_BUDGET=m +CONFIG_DVB_BUDGET_CI=m +CONFIG_DVB_BUDGET_AV=m +CONFIG_DVB_BUDGET_PATCH=m + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +# CONFIG_DVB_USB_PCTV452E is not set +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_FRIIO=m +CONFIG_DVB_USB_EC168=m +# CONFIG_DVB_USB_AZ6007 is not set +CONFIG_DVB_USB_AZ6027=m +CONFIG_DVB_USB_LME2510=m +CONFIG_DVB_USB_TECHNISAT_USB2=m +# CONFIG_DVB_USB_IT913X is not set +# CONFIG_DVB_USB_MXL111SF is not set +# CONFIG_DVB_USB_RTL28XXU is not set +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +CONFIG_SMS_SIANO_MDTV=m + +# +# Siano module components +# +CONFIG_SMS_USB_DRV=m +CONFIG_SMS_SDIO_DRV=m + +# +# Supported FlexCopII (B2C2) Adapters +# +CONFIG_DVB_B2C2_FLEXCOP=m +CONFIG_DVB_B2C2_FLEXCOP_PCI=m +CONFIG_DVB_B2C2_FLEXCOP_USB=m +# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set + +# +# Supported BT878 Adapters +# + +# +# Supported Pluto2 Adapters +# +CONFIG_DVB_PLUTO2=m + +# +# Supported SDMC DM1105 Adapters +# +CONFIG_DVB_DM1105=m + +# +# Supported FireWire (IEEE 1394) Adapters +# +CONFIG_DVB_FIREDTV=m +CONFIG_DVB_FIREDTV_INPUT=y + +# +# Supported Earthsoft PT1 Adapters +# +CONFIG_DVB_PT1=m + +# +# Supported Mantis Adapters +# +CONFIG_MANTIS_CORE=m +CONFIG_DVB_MANTIS=m +CONFIG_DVB_HOPPER=m + +# +# Supported nGene Adapters +# +CONFIG_DVB_NGENE=m + +# +# Supported ddbridge ('Octopus') Adapters +# +# CONFIG_DVB_DDBRIDGE is not set + +# +# Supported DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV6110x=m + +# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m +CONFIG_DVB_TDA10071=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_DRXD=m +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m +CONFIG_DVB_CXD2820R=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_MB86A20S=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_LNBP21=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m +CONFIG_DVB_IX2505V=m +CONFIG_DVB_M88RS2000=m + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set + +# +# Graphics support +# +# CONFIG_VGA_ARB is not set +# CONFIG_DRM is not set +# CONFIG_STUB_POULSBO is not set +CONFIG_VGASTATE=m +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=m +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_DDC=m +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=m +# CONFIG_FB_WMT_GE_ROPS is not set +CONFIG_FB_DEFERRED_IO=y +CONFIG_FB_SVGALIB=m +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +CONFIG_FB_S3=m +CONFIG_FB_S3_DDC=y +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +CONFIG_FB_3DFX=m +# CONFIG_FB_3DFX_ACCEL is not set +CONFIG_FB_3DFX_I2C=y +# CONFIG_FB_VOODOO1 is not set +CONFIG_FB_VT8623=m +# CONFIG_FB_TRIDENT is not set +CONFIG_FB_ARK=m +CONFIG_FB_PM3=m +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_TMIO is not set +CONFIG_FB_SM501=m +# CONFIG_FB_SMSCUFX is not set +CONFIG_FB_UDL=m +# CONFIG_FB_VIRTUAL is not set +CONFIG_FB_METRONOME=m +CONFIG_FB_MB862XX=m +CONFIG_FB_MB862XX_PCI_GDC=y +CONFIG_FB_MB862XX_I2C=y +# CONFIG_FB_BROADSHEET is not set +# CONFIG_EXYNOS_VIDEO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_PCF50633 is not set +# CONFIG_BACKLIGHT_LP855X is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=m +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_RAWMIDI_SEQ=m +CONFIG_SND_OPL3_LIB_SEQ=m +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +CONFIG_SND_ALOOP=m +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +CONFIG_SND_MTS64=m +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PORTMAN2X4=m +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 +CONFIG_SND_PCI=y +CONFIG_SND_AD1889=m +CONFIG_SND_ALS300=m +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +CONFIG_SND_OXYGEN_LIB=m +CONFIG_SND_OXYGEN=m +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +CONFIG_SND_CS5535AUDIO=m +CONFIG_SND_CTXFI=m +CONFIG_SND_DARLA20=m +CONFIG_SND_GINA20=m +CONFIG_SND_LAYLA20=m +CONFIG_SND_DARLA24=m +CONFIG_SND_GINA24=m +CONFIG_SND_LAYLA24=m +CONFIG_SND_MONA=m +CONFIG_SND_MIA=m +CONFIG_SND_ECHO3G=m +CONFIG_SND_INDIGO=m +CONFIG_SND_INDIGOIO=m +CONFIG_SND_INDIGODJ=m +CONFIG_SND_INDIGOIOX=m +CONFIG_SND_INDIGODJX=m +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +CONFIG_SND_HDSPM=m +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +CONFIG_SND_LOLA=m +CONFIG_SND_LX6464ES=m +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +CONFIG_SND_PCXHR=m +CONFIG_SND_RIPTIDE=m +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +CONFIG_SND_VIRTUOSO=m +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_UA101=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_USB_6FIRE=m +CONFIG_SND_FIREWIRE=y +CONFIG_SND_FIREWIRE_LIB=m +CONFIG_SND_FIREWIRE_SPEAKERS=m +CONFIG_SND_ISIGHT=m +CONFIG_SND_SOC=m +CONFIG_SND_KIRKWOOD_SOC=m +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_BATTERY_STRENGTH is not set +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_ACRUX=m +# CONFIG_HID_ACRUX_FF is not set +# CONFIG_HID_APPLE is not set +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_PRODIKEYS=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EMS_FF=m +CONFIG_HID_ELECOM=m +CONFIG_HID_EZKEY=m +# CONFIG_HID_HOLTEK is not set +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LCPOWER=m +CONFIG_HID_LOGITECH=m +CONFIG_HID_LOGITECH_DJ=m +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_LOGIG940_FF=y +CONFIG_LOGIWHEELS_FF=y +CONFIG_HID_MAGICMOUSE=m +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTRIG=m +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_FB=y +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LEDS=y +# CONFIG_HID_PRIMAX is not set +CONFIG_HID_ROCCAT=m +# CONFIG_HID_SAITEK is not set +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +# CONFIG_HID_SPEEDLINK is not set +CONFIG_HID_SUNPLUS=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +# CONFIG_HID_TIVO is not set +CONFIG_HID_TOPSEED=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_WACOM_POWER_SUPPLY=y +# CONFIG_HID_WIIMOTE is not set +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y +CONFIG_HID_ZYDACRON=m +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB_ARCH_HAS_XHCI=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=m +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_C67X00_HCD=m +CONFIG_USB_XHCI_HCD=m +# CONFIG_USB_XHCI_HCD_DEBUGGING is not set +CONFIG_USB_EHCI_HCD=m +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_HCD_SSB is not set +# CONFIG_USB_OHCI_HCD_PLATFORM is not set +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +CONFIG_USB_U132_HCD=m +CONFIG_USB_SL811_HCD=m +# CONFIG_USB_SL811_HCD_ISO is not set +CONFIG_USB_R8A66597_HCD=m +CONFIG_USB_WHCI_HCD=m +CONFIG_USB_HWA_HCD=m + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_REALTEK_AUTOPM=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=m +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +# CONFIG_USB_SERIAL_F81232 is not set +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_METRO is not set +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7715_PARPORT=y +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIEMENS_MPI=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_WWAN=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m +CONFIG_USB_SERIAL_ZIO=m +CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m +CONFIG_USB_ISIGHTFW=m +CONFIG_USB_YUREX=m +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ULPI is not set +CONFIG_NOP_USB_XCEIV=m +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +CONFIG_UWB_I1480U=m +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set +# CONFIG_MMC_CLKGATE is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_PCI=m +CONFIG_MMC_RICOH_MMC=y +CONFIG_MMC_SDHCI_PLTFM=m +CONFIG_MMC_TIFM_SD=m +CONFIG_MMC_MVSDIO=m +CONFIG_MMC_SPI=m +CONFIG_MMC_CB710=m +CONFIG_MMC_VIA_SDMMC=m +# CONFIG_MMC_DW is not set +CONFIG_MMC_VUB300=m +CONFIG_MMC_USHC=m +CONFIG_MEMSTICK=m +# CONFIG_MEMSTICK_DEBUG is not set + +# +# MemoryStick drivers +# +# CONFIG_MEMSTICK_UNSAFE_RESUME is not set +CONFIG_MSPRO_BLOCK=m + +# +# MemoryStick Host Controller Drivers +# +CONFIG_MEMSTICK_TIFM_MS=m +CONFIG_MEMSTICK_JMICRON_38X=m +CONFIG_MEMSTICK_R592=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_LM3530 is not set +CONFIG_LEDS_PCA9532=m +# CONFIG_LEDS_PCA9532_GPIO is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_LP3944=m +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP5523 is not set +CONFIG_LEDS_PCA955X=m +# CONFIG_LEDS_PCA9633 is not set +CONFIG_LEDS_DAC124S085=m +CONFIG_LEDS_REGULATOR=m +CONFIG_LEDS_BD2802=m +CONFIG_LEDS_LT3593=m +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_OT200 is not set +CONFIG_LEDS_TRIGGERS=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_ACCESSIBILITY=y +CONFIG_A11Y_BRAILLE_CONSOLE=y +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1672=m +# CONFIG_RTC_DRV_DS3232 is not set +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +# CONFIG_RTC_DRV_ISL12022 is not set +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +# CONFIG_RTC_DRV_M41T80_WDT is not set +CONFIG_RTC_DRV_BQ32K=m +CONFIG_RTC_DRV_S35390A=y +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +# CONFIG_RTC_DRV_EM3027 is not set +# CONFIG_RTC_DRV_RV3029C2 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T93 is not set +CONFIG_RTC_DRV_M41T94=m +CONFIG_RTC_DRV_DS1305=m +CONFIG_RTC_DRV_DS1390=m +CONFIG_RTC_DRV_MAX6902=m +CONFIG_RTC_DRV_R9701=m +CONFIG_RTC_DRV_RS5C348=m +CONFIG_RTC_DRV_DS3234=m +CONFIG_RTC_DRV_PCF2123=m + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=m +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_STK17TA8=m +CONFIG_RTC_DRV_M48T86=m +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_V3020=m +CONFIG_RTC_DRV_PCF50633=m + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_MV=y +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y +CONFIG_MV_XOR=y +CONFIG_TIMB_DMA=m +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +CONFIG_ASYNC_TX_DMA=y +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +CONFIG_UIO_CIF=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_UIO_AEC=m +CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m +CONFIG_UIO_NETX=m + +# +# Virtio drivers +# +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set +# CONFIG_VIRTIO_MMIO is not set + +# +# Microsoft Hyper-V guest support +# +CONFIG_STAGING=y +# CONFIG_ET131X is not set +# CONFIG_USBIP_CORE is not set +# CONFIG_W35UND is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_ECHO is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_PANEL is not set +# CONFIG_R8187SE is not set +# CONFIG_RTL8192U is not set +# CONFIG_RTLLIB is not set +# CONFIG_R8712U is not set +# CONFIG_RTS_PSTOR is not set +CONFIG_RTS5139=m +# CONFIG_RTS5139_DEBUG is not set +# CONFIG_TRANZPORT is not set +# CONFIG_IDE_PHISON is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_VT6655 is not set +# CONFIG_VT6656 is not set +# CONFIG_VME_BUS is not set +# CONFIG_DX_SEP is not set +# CONFIG_IIO is not set +# CONFIG_FB_SM7XX is not set +# CONFIG_CRYSTALHD is not set +# CONFIG_FB_XGI is not set +# CONFIG_USB_ENESTORAGE is not set +# CONFIG_BCM_WIMAX is not set +# CONFIG_FT1000 is not set + +# +# Speakup console speech +# +CONFIG_SPEAKUP=m +CONFIG_SPEAKUP_SYNTH_ACNTSA=m +CONFIG_SPEAKUP_SYNTH_ACNTPC=m +CONFIG_SPEAKUP_SYNTH_APOLLO=m +CONFIG_SPEAKUP_SYNTH_AUDPTR=m +CONFIG_SPEAKUP_SYNTH_BNS=m +CONFIG_SPEAKUP_SYNTH_DECTLK=m +CONFIG_SPEAKUP_SYNTH_DECEXT=m +# CONFIG_SPEAKUP_SYNTH_DECPC is not set +CONFIG_SPEAKUP_SYNTH_DTLK=m +CONFIG_SPEAKUP_SYNTH_KEYPC=m +CONFIG_SPEAKUP_SYNTH_LTLK=m +CONFIG_SPEAKUP_SYNTH_SOFT=m +CONFIG_SPEAKUP_SYNTH_SPKOUT=m +CONFIG_SPEAKUP_SYNTH_TXPRT=m +CONFIG_SPEAKUP_SYNTH_DUMMY=m +# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set +# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set +# CONFIG_STAGING_MEDIA is not set + +# +# Android +# +# CONFIG_ANDROID is not set +# CONFIG_PHONE is not set +# CONFIG_USB_WPAN_HCD is not set + +# +# Hardware Spinlock drivers +# +CONFIG_CLKSRC_MMIO=y +CONFIG_IOMMU_SUPPORT=y + +# +# Remoteproc drivers (EXPERIMENTAL) +# + +# +# Rpmsg drivers (EXPERIMENTAL) +# +# CONFIG_VIRT_DRIVERS is not set +# CONFIG_PM_DEVFREQ is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y +# CONFIG_XFS_DEBUG is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +CONFIG_OCFS2_FS_STATS=y +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set +CONFIG_NILFS2_FS=m +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=m +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_GENERIC_ACL=y + +# +# Caches +# +CONFIG_FSCACHE=m +# CONFIG_FSCACHE_STATS is not set +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_XATTR=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +CONFIG_LOGFS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +# CONFIG_HPFS_FS is not set +CONFIG_QNX4FS_FS=m +# CONFIG_QNX6FS_FS is not set +CONFIG_ROMFS_FS=m +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +# CONFIG_ROMFS_BACKED_BY_MTD is not set +CONFIG_ROMFS_BACKED_BY_BOTH=y +CONFIG_ROMFS_ON_BLOCK=y +CONFIG_ROMFS_ON_MTD=y +# CONFIG_PSTORE is not set +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +CONFIG_EXOFS_FS=m +# CONFIG_EXOFS_DEBUG is not set +CONFIG_ORE=m +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_NFS_FSCACHE=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +# CONFIG_NFSD_FAULT_INJECTION is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_SUNRPC_DEBUG is not set +CONFIG_CEPH_FS=m +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_FSCACHE=y +CONFIG_CIFS_ACL=y +# CONFIG_NCP_FS is not set +CONFIG_CODA_FS=m +# CONFIG_AFS_FS is not set +CONFIG_9P_FS=m +CONFIG_9P_FSCACHE=y +CONFIG_9P_FS_POSIX_ACL=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_DLM_DEBUG=y + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_HARDLOCKUP_DETECTOR is not set +# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_TRACE is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_EVENT_POWER_TRACING_DEPRECATED=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_ASYNC_RAID6_TEST is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_TEST_KSTRTOX is not set +CONFIG_STRICT_DEVMEM=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_UART_NONE=y +# CONFIG_DEBUG_ICEDCC is not set +# CONFIG_DEBUG_SEMIHOSTING is not set +CONFIG_EARLY_PRINTK=y + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_ENCRYPTED_KEYS is not set +CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_NETWORK_XFRM=y +CONFIG_SECURITY_PATH=y +CONFIG_LSM_MMAP_MIN_ADDR=32768 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +CONFIG_SECURITY_TOMOYO=y +CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 +CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 +# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set +CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" +CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_YAMA is not set +# CONFIG_IMA is not set +# CONFIG_EVM is not set +CONFIG_DEFAULT_SECURITY_SELINUX=y +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_DAC is not set +CONFIG_DEFAULT_SECURITY="selinux" +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_USER_API=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_MV_CESA=m +CONFIG_CRYPTO_DEV_HIFN_795X=m +CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_BITREVERSE=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IO=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=m +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +# CONFIG_CRC8 is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_DQL=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_LRU_CACHE=m +CONFIG_AVERAGE=y +# CONFIG_CORDIC is not set diff --git a/with-linux-3.4/0002-Driver-for-Marvell-Libertas-8688-SDIO-micro-AP-suppo-3.2.patch b/with-linux-3.4/0002-Driver-for-Marvell-Libertas-8688-SDIO-micro-AP-suppo-3.2.patch new file mode 100644 index 0000000..d725ef3 --- /dev/null +++ b/with-linux-3.4/0002-Driver-for-Marvell-Libertas-8688-SDIO-micro-AP-suppo-3.2.patch @@ -0,0 +1,31 @@ +--- ./drivers/net/wireless/libertas_uap/uap_main.c.orig 2012-01-05 02:04:22.082318156 -0700 ++++ ./drivers/net/wireless/libertas_uap/uap_main.c 2012-01-05 02:05:50.161341323 -0700 +@@ -1322,20 +1322,6 @@ uap_set_mac_address(struct net_device *d + } + + /** +- * @brief This function sets multicast addresses to firmware +- * +- * @param dev A pointer to net_device structure +- * @return n/a +- */ +-static void +-uap_set_multicast_list(struct net_device *dev) +-{ +- ENTER(); +-#warning uap_set_multicast_list not implemented. Expect problems with IPv6. +- LEAVE(); +-} +- +-/** + * @brief This function handles the timeout of packet + * transmission + * +@@ -1558,7 +1544,6 @@ static const struct net_device_ops uap_n + .ndo_set_mac_address = uap_set_mac_address, + .ndo_tx_timeout = uap_tx_timeout, + .ndo_get_stats = uap_get_stats, +- .ndo_set_multicast_list = uap_set_multicast_list, + }; + #endif + diff --git a/with-linux-3.4/dreamplug-3.4.0.patch b/with-linux-3.4/dreamplug-3.4.0.patch new file mode 100644 index 0000000..8840d61 --- /dev/null +++ b/with-linux-3.4/dreamplug-3.4.0.patch @@ -0,0 +1,107 @@ +Index: linux-3.4/arch/arm/mach-kirkwood/Kconfig +=================================================================== +--- linux-3.4.orig/arch/arm/mach-kirkwood/Kconfig 2012-05-27 17:28:53.529328624 -0300 ++++ linux-3.4/arch/arm/mach-kirkwood/Kconfig 2012-05-27 17:28:56.329418105 -0300 +@@ -44,6 +44,12 @@ + Say 'Y' here if you want your kernel to support the + Marvell GuruPlug Reference Board. + ++config MACH_DREAMPLUG ++ bool "Marvell DreamPlug Reference Board" ++ help ++ Say 'Y' here if you want your kernel to support the ++ Marvell DreamPlug Reference Board. ++ + config ARCH_KIRKWOOD_DT + bool "Marvell Kirkwood Flattened Device Tree" + select USE_OF +Index: linux-3.4/arch/arm/mach-kirkwood/Makefile +=================================================================== +--- linux-3.4.orig/arch/arm/mach-kirkwood/Makefile 2012-05-27 17:28:53.599330861 -0300 ++++ linux-3.4/arch/arm/mach-kirkwood/Makefile 2012-05-27 17:28:56.329418105 -0300 +@@ -7,6 +7,7 @@ + obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o + obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o + obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o ++obj-$(CONFIG_MACH_DREAMPLUG) += board-dreamplug.o + obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o + obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o + obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o +Index: linux-3.4/arch/arm/mach-kirkwood/board-dreamplug.c +=================================================================== +--- linux-3.4.orig/arch/arm/mach-kirkwood/board-dreamplug.c 2012-05-27 17:28:53.479327026 -0300 ++++ linux-3.4/arch/arm/mach-kirkwood/board-dreamplug.c 2012-05-27 17:28:56.329418105 -0300 +@@ -48,11 +48,13 @@ + .size = SZ_64K, + .offset = SZ_512K + SZ_512K, + }, ++#ifdef CONFIG_MACH_DREAMPLUG_DT + { + .name = "dtb", + .size = SZ_64K, + .offset = SZ_512K + SZ_512K + SZ_512K, + }, ++#endif + }; + + static const struct flash_platform_data dreamplug_spi_slave_data = { +@@ -136,8 +138,16 @@ + /* + * Basic setup. Needs to be called early. + */ ++#ifdef CONFIG_MACH_DREAMPLUG ++ kirkwood_init(); ++#endif ++ + kirkwood_mpp_conf(dreamplug_mpp_config); + ++#ifdef CONFIG_MACH_DREAMPLUG ++ kirkwood_uart0_init(); ++#endif ++ + spi_register_board_info(dreamplug_spi_slave_info, + ARRAY_SIZE(dreamplug_spi_slave_info)); + kirkwood_spi_init(); +@@ -150,3 +160,16 @@ + + platform_device_register(&dreamplug_leds); + } ++ ++#ifdef CONFIG_MACH_DREAMPLUG ++MACHINE_START(DREAMPLUG, "Marvell DreamPlug Reference Board") ++ /* Maintainer: ? */ ++ .map_io = kirkwood_map_io, ++ .init_early = kirkwood_init_early, ++ .init_irq = kirkwood_init_irq, ++ .timer = &kirkwood_timer, ++ .init_machine = dreamplug_init, ++ .restart = kirkwood_restart, ++ .atag_offset = 0x100, ++MACHINE_END ++#endif +Index: linux-3.4/arch/arm/tools/mach-types +=================================================================== +--- linux-3.4.orig/arch/arm/tools/mach-types 2012-05-27 17:28:53.429325427 -0300 ++++ linux-3.4/arch/arm/tools/mach-types 2012-05-27 17:28:56.339418425 -0300 +@@ -845,7 +845,7 @@ + mx51_ivy MACH_MX51_IVY MX51_IVY 3547 + mx51_lvd MACH_MX51_LVD MX51_LVD 3548 + omap3_wiser2 MACH_OMAP3_WISER2 OMAP3_WISER2 3549 +-dreamplug MACH_DREAMPLUG DREAMPLUG 3550 ++dreamplug MACH_DREAMPLUG DREAMPLUG 2659 + cobas_c_111 MACH_COBAS_C_111 COBAS_C_111 3551 + cobas_u_411 MACH_COBAS_U_411 COBAS_U_411 3552 + hssd MACH_HSSD HSSD 3553 +Index: linux-3.4/arch/arm/mach-kirkwood/common.h +=================================================================== +--- linux-3.4.orig/arch/arm/mach-kirkwood/common.h 2012-05-27 17:29:00.629555522 -0300 ++++ linux-3.4/arch/arm/mach-kirkwood/common.h 2012-05-27 17:36:06.263156553 -0300 +@@ -52,7 +52,7 @@ + void kirkwood_restart(char, const char *); + + /* board init functions for boards not fully converted to fdt */ +-#ifdef CONFIG_MACH_DREAMPLUG_DT ++#if defined CONFIG_MACH_DREAMPLUG_DT || defined CONFIG_MACH_DREAMPLUG + void dreamplug_init(void); + #else + static inline void dreamplug_init(void) {}; diff --git a/with-linux-3.4/linux-3.0-SDIO-micro-AP.patch b/with-linux-3.4/linux-3.0-SDIO-micro-AP.patch new file mode 100644 index 0000000..9998a51 --- /dev/null +++ b/with-linux-3.4/linux-3.0-SDIO-micro-AP.patch @@ -0,0 +1,5111 @@ +diff -Naupr linux-2.6.37/drivers/net/wireless/Kconfig linux-2.6.37-new/drivers/net/wireless/Kconfig +--- linux-2.6.37/drivers/net/wireless/Kconfig 2011-01-04 17:50:19.000000000 -0700 ++++ linux-2.6.37-new/drivers/net/wireless/Kconfig 2011-01-08 06:01:04.034836160 -0700 +@@ -51,6 +51,12 @@ config LIBERTAS_THINFIRM_USB + ---help--- + A driver for Marvell Libertas 8388 USB devices using thinfirm. + ++config LIBERTAS_UAP ++ tristate "Marvell Libertas 8688 micro-AP support" ++ depends on LIBERTAS && MMC ++ ---help--- ++ A driver for Marvell Libertas 8688 SDIO micro-AP support. ++ + config AIRO + tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" + depends on ISA_DMA_API && (PCI || BROKEN) +diff -Naupr linux-2.6.37/drivers/net/wireless/Makefile linux-2.6.37-new/drivers/net/wireless/Makefile +--- linux-2.6.37/drivers/net/wireless/Makefile 2011-01-04 17:50:19.000000000 -0700 ++++ linux-2.6.37-new/drivers/net/wireless/Makefile 2011-01-08 06:01:04.034836160 -0700 +@@ -36,6 +36,8 @@ obj-$(CONFIG_LIBERTAS) += libertas/ + + obj-$(CONFIG_LIBERTAS_THINFIRM) += libertas_tf/ + ++obj-$(CONFIG_LIBERTAS_UAP) += libertas_uap/ ++ + obj-$(CONFIG_ADM8211) += adm8211.o + + obj-$(CONFIG_MWL8K) += mwl8k.o +diff -Naupr linux-2.6.37/drivers/net/wireless/libertas_uap/Makefile linux-2.6.37-new/drivers/net/wireless/libertas_uap/Makefile +--- linux-2.6.37/drivers/net/wireless/libertas_uap/Makefile 1969-12-31 17:00:00.000000000 -0700 ++++ linux-2.6.37-new/drivers/net/wireless/libertas_uap/Makefile 2011-01-08 06:01:04.036836021 -0700 +@@ -0,0 +1,6 @@ ++obj-$(CONFIG_LIBERTAS_UAP) += uap8xxx.o ++ ++uap8xxx-y += uap_main.o uap_sdio_mmc.o ++uap8xxx-$(CONFIG_PROC_FS) += uap_proc.o uap_debug.o ++ ++EXTRA_CFLAGS += -DFPNUM='"52"' -DPXA3XX_DMA_ALIGN -DDEBUG_LEVEL1 +diff -Naupr linux-2.6.37/drivers/net/wireless/libertas_uap/uap_debug.c linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_debug.c +--- linux-2.6.37/drivers/net/wireless/libertas_uap/uap_debug.c 1969-12-31 17:00:00.000000000 -0700 ++++ linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_debug.c 2011-01-08 06:01:04.038835884 -0700 +@@ -0,0 +1,261 @@ ++/** @file uap_debug.c ++ * @brief This file contains functions for debug proc file. ++ * ++ * Copyright (C) 2008-2009, Marvell International Ltd. ++ * ++ * This software file (the "File") is distributed by Marvell International ++ * Ltd. under the terms of the GNU General Public License Version 2, June 1991 ++ * (the "License"). You may use, redistribute and/or modify this File in ++ * accordance with the terms and conditions of the License, a copy of which ++ * is available along with the File in the gpl.txt file or by writing to ++ * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA ++ * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt. ++ * ++ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ++ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about ++ * this warranty disclaimer. ++ * ++ */ ++#ifdef CONFIG_PROC_FS ++#include "uap_headers.h" ++ ++/******************************************************** ++ Local Variables ++********************************************************/ ++ ++#define item_size(n) (sizeof ((uap_adapter *)0)->n) ++#define item_addr(n) ((u32) &((uap_adapter *)0)->n) ++ ++#define item_dbg_size(n) (sizeof (((uap_adapter *)0)->dbg.n)) ++#define item_dbg_addr(n) ((u32) &(((uap_adapter *)0)->dbg.n)) ++ ++#define item_dev_size(n) (sizeof ((uap_dev_t *)0)->n) ++#define item_dev_addr(n) ((u32) &((uap_dev_t *)0)->n) ++ ++/** MicroAp device offset */ ++#define OFFSET_UAP_DEV 0x01 ++/** Bluetooth adapter offset */ ++#define OFFSET_UAP_ADAPTER 0x02 ++ ++struct debug_data ++{ ++ /** Name */ ++ char name[32]; ++ /** Size */ ++ u32 size; ++ /** Address */ ++ u32 addr; ++ /** Offset */ ++ u32 offset; ++ /** Flag */ ++ u32 flag; ++}; ++ ++/* To debug any member of uap_adapter, simply add one line here. ++ */ ++static struct debug_data items[] = { ++ {"cmd_sent", item_dev_size(cmd_sent), 0, item_dev_addr(cmd_sent), ++ OFFSET_UAP_DEV}, ++ {"data_sent", item_dev_size(data_sent), 0, item_dev_addr(data_sent), ++ OFFSET_UAP_DEV}, ++ {"IntCounter", item_size(IntCounter), 0, item_addr(IntCounter), ++ OFFSET_UAP_ADAPTER}, ++ {"cmd_pending", item_size(cmd_pending), 0, item_addr(cmd_pending), ++ OFFSET_UAP_ADAPTER}, ++ {"num_cmd_h2c_fail", item_dbg_size(num_cmd_host_to_card_failure), 0, ++ item_dbg_addr(num_cmd_host_to_card_failure), OFFSET_UAP_ADAPTER}, ++ {"num_tx_h2c_fail", item_dbg_size(num_tx_host_to_card_failure), 0, ++ item_dbg_addr(num_tx_host_to_card_failure), OFFSET_UAP_ADAPTER}, ++ {"psmode", item_size(psmode), 0, item_addr(psmode), OFFSET_UAP_ADAPTER}, ++ {"ps_state", item_size(ps_state), 0, item_addr(ps_state), ++ OFFSET_UAP_ADAPTER}, ++#ifdef DEBUG_LEVEL1 ++ {"drvdbg", sizeof(drvdbg), (u32) & drvdbg, 0, 0} ++#endif ++}; ++ ++static int num_of_items = sizeof(items) / sizeof(items[0]); ++ ++/******************************************************** ++ Global Variables ++********************************************************/ ++ ++/******************************************************** ++ Local Functions ++********************************************************/ ++/** ++ * @brief proc read function ++ * ++ * @param page pointer to buffer ++ * @param s read data starting position ++ * @param off offset ++ * @param cnt counter ++ * @param eof end of file flag ++ * @param data data to output ++ * @return number of output data ++ */ ++static int ++uap_debug_read(char *page, char **s, off_t off, int cnt, int *eof, void *data) ++{ ++ int val = 0; ++ char *p = page; ++ int i; ++ ++ struct debug_data *d = (struct debug_data *) data; ++ ++ if (MODULE_GET == 0) ++ return UAP_STATUS_FAILURE; ++ ++ for (i = 0; i < num_of_items; i++) { ++ if (d[i].size == 1) ++ val = *((u8 *) d[i].addr); ++ else if (d[i].size == 2) ++ val = *((u16 *) d[i].addr); ++ else if (d[i].size == 4) ++ val = *((u32 *) d[i].addr); ++ ++ p += sprintf(p, "%s=%d\n", d[i].name, val); ++ } ++ MODULE_PUT; ++ return p - page; ++} ++ ++/** ++ * @brief proc write function ++ * ++ * @param f file pointer ++ * @param buf pointer to data buffer ++ * @param cnt data number to write ++ * @param data data to write ++ * @return number of data ++ */ ++static int ++uap_debug_write(struct file *f, const char *buf, unsigned long cnt, void *data) ++{ ++ int r, i; ++ char *pdata; ++ char *p; ++ char *p0; ++ char *p1; ++ char *p2; ++ struct debug_data *d = (struct debug_data *) data; ++ ++ if (MODULE_GET == 0) ++ return UAP_STATUS_FAILURE; ++ ++ pdata = (char *) kmalloc(cnt, GFP_KERNEL); ++ if (pdata == NULL) { ++ MODULE_PUT; ++ return 0; ++ } ++ ++ if (copy_from_user(pdata, buf, cnt)) { ++ PRINTM(INFO, "Copy from user failed\n"); ++ kfree(pdata); ++ MODULE_PUT; ++ return 0; ++ } ++ ++ p0 = pdata; ++ for (i = 0; i < num_of_items; i++) { ++ do { ++ p = strstr(p0, d[i].name); ++ if (p == NULL) ++ break; ++ p1 = strchr(p, '\n'); ++ if (p1 == NULL) ++ break; ++ p0 = p1++; ++ p2 = strchr(p, '='); ++ if (!p2) ++ break; ++ p2++; ++ r = string_to_number(p2); ++ if (d[i].size == 1) ++ *((u8 *) d[i].addr) = (u8) r; ++ else if (d[i].size == 2) ++ *((u16 *) d[i].addr) = (u16) r; ++ else if (d[i].size == 4) ++ *((u32 *) d[i].addr) = (u32) r; ++ break; ++ } while (TRUE); ++ } ++ kfree(pdata); ++#ifdef DEBUG_LEVEL1 ++ printk(KERN_ALERT "drvdbg = 0x%x\n", drvdbg); ++ printk(KERN_ALERT "INFO (%08lx) %s\n", DBG_INFO, ++ (drvdbg & DBG_INFO) ? "X" : ""); ++ printk(KERN_ALERT "WARN (%08lx) %s\n", DBG_WARN, ++ (drvdbg & DBG_WARN) ? "X" : ""); ++ printk(KERN_ALERT "ENTRY (%08lx) %s\n", DBG_ENTRY, ++ (drvdbg & DBG_ENTRY) ? "X" : ""); ++ printk(KERN_ALERT "CMD_D (%08lx) %s\n", DBG_CMD_D, ++ (drvdbg & DBG_CMD_D) ? "X" : ""); ++ printk(KERN_ALERT "DAT_D (%08lx) %s\n", DBG_DAT_D, ++ (drvdbg & DBG_DAT_D) ? "X" : ""); ++ printk(KERN_ALERT "CMND (%08lx) %s\n", DBG_CMND, ++ (drvdbg & DBG_CMND) ? "X" : ""); ++ printk(KERN_ALERT "DATA (%08lx) %s\n", DBG_DATA, ++ (drvdbg & DBG_DATA) ? "X" : ""); ++ printk(KERN_ALERT "ERROR (%08lx) %s\n", DBG_ERROR, ++ (drvdbg & DBG_ERROR) ? "X" : ""); ++ printk(KERN_ALERT "FATAL (%08lx) %s\n", DBG_FATAL, ++ (drvdbg & DBG_FATAL) ? "X" : ""); ++ printk(KERN_ALERT "MSG (%08lx) %s\n", DBG_MSG, ++ (drvdbg & DBG_MSG) ? "X" : ""); ++#endif ++ MODULE_PUT; ++ return cnt; ++} ++ ++/******************************************************** ++ Global Functions ++********************************************************/ ++/** ++ * @brief create debug proc file ++ * ++ * @param priv pointer uap_private ++ * @param dev pointer net_device ++ * @return N/A ++ */ ++void ++uap_debug_entry(uap_private * priv, struct net_device *dev) ++{ ++ int i; ++ struct proc_dir_entry *r; ++ ++ if (priv->proc_entry == NULL) ++ return; ++ ++ for (i = 0; i < num_of_items; i++) { ++ if (items[i].flag & OFFSET_UAP_ADAPTER) ++ items[i].addr = items[i].offset + (u32) priv->adapter; ++ if (items[i].flag & OFFSET_UAP_DEV) ++ items[i].addr = items[i].offset + (u32) & priv->uap_dev; ++ } ++ r = create_proc_entry("debug", 0644, priv->proc_entry); ++ if (r == NULL) ++ return; ++ ++ r->data = &items[0]; ++ r->read_proc = uap_debug_read; ++ r->write_proc = uap_debug_write; ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++ r->owner = THIS_MODULE; ++#endif ++} ++ ++/** ++ * @brief remove proc file ++ * ++ * @param priv pointer uap_private ++ * @return N/A ++ */ ++void ++uap_debug_remove(uap_private * priv) ++{ ++ remove_proc_entry("debug", priv->proc_entry); ++} ++ ++#endif +diff -Naupr linux-2.6.37/drivers/net/wireless/libertas_uap/uap_drv.h linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_drv.h +--- linux-2.6.37/drivers/net/wireless/libertas_uap/uap_drv.h 1969-12-31 17:00:00.000000000 -0700 ++++ linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_drv.h 2011-06-26 00:15:04.040835746 -0700 +@@ -0,0 +1,667 @@ ++/** @file uap_drv.h ++ * @brief This file contains Linux OS related definitions and ++ * declarations, uAP driver ++ * ++ * Copyright (C) 2008-2009, Marvell International Ltd. ++ * ++ * This software file (the "File") is distributed by Marvell International ++ * Ltd. under the terms of the GNU General Public License Version 2, June 1991 ++ * (the "License"). You may use, redistribute and/or modify this File in ++ * accordance with the terms and conditions of the License, a copy of which ++ * is available along with the File in the gpl.txt file or by writing to ++ * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA ++ * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt. ++ * ++ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ++ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about ++ * this warranty disclaimer. ++ * ++ */ ++ ++#ifndef _UAP_DRV_H ++#define _UAP_DRV_H ++ ++/** Driver release version */ ++#define DRIVER_VERSION "26146" ++ ++/** True */ ++#ifndef TRUE ++#define TRUE 1 ++#endif ++/** False */ ++#ifndef FALSE ++#define FALSE 0 ++#endif ++ ++/** Bit definitions */ ++#ifndef BIT ++#define BIT(x) (1UL << (x)) ++#endif ++ ++/** Dma addresses are 32-bits wide. */ ++#ifndef __ATTRIB_ALIGN__ ++#define __ATTRIB_ALIGN__ __attribute__((aligned(4))) ++#endif ++ ++/** attribute pack */ ++#ifndef __ATTRIB_PACK__ ++#define __ATTRIB_PACK__ __attribute__ ((packed)) ++#endif ++ ++/** Debug Macro definition*/ ++#ifdef DEBUG_LEVEL1 ++ ++extern u32 drvdbg; ++ ++/** Debug message control bit definition for drvdbg */ ++/** Debug message */ ++#define DBG_MSG BIT(0) ++/** Debug fatal message */ ++#define DBG_FATAL BIT(1) ++/** Debug error message */ ++#define DBG_ERROR BIT(2) ++/** Debug data message */ ++#define DBG_DATA BIT(3) ++/** Debug command message */ ++#define DBG_CMND BIT(4) ++ ++/** Debug data */ ++#define DBG_DAT_D BIT(16) ++/** Debug command */ ++#define DBG_CMD_D BIT(17) ++ ++/** Debug entry */ ++#define DBG_ENTRY BIT(28) ++/** Debug warning */ ++#define DBG_WARN BIT(29) ++/** Debug info */ ++#define DBG_INFO BIT(30) ++ ++/** Print info */ ++#define PRINTM_INFO(msg...) {if (drvdbg & DBG_INFO) printk(KERN_DEBUG msg);} ++/** Print warn message */ ++#define PRINTM_WARN(msg...) {if (drvdbg & DBG_WARN) printk(KERN_DEBUG msg);} ++/** Print entry */ ++#define PRINTM_ENTRY(msg...) {if (drvdbg & DBG_ENTRY) printk(KERN_DEBUG msg);} ++/** Print cmd_d */ ++#define PRINTM_CMD_D(msg...) {if (drvdbg & DBG_CMD_D) printk(KERN_DEBUG msg);} ++/** Print data_d */ ++#define PRINTM_DAT_D(msg...) {if (drvdbg & DBG_DAT_D) printk(KERN_DEBUG msg);} ++/** Print command */ ++#define PRINTM_CMND(msg...) {if (drvdbg & DBG_CMND) printk(KERN_DEBUG msg);} ++/** Print data */ ++#define PRINTM_DATA(msg...) {if (drvdbg & DBG_DATA) printk(KERN_DEBUG msg);} ++/** Print error message */ ++#define PRINTM_ERROR(msg...) {if (drvdbg & DBG_ERROR) printk(KERN_DEBUG msg);} ++/** Print fatal message */ ++#define PRINTM_FATAL(msg...) {if (drvdbg & DBG_FATAL) printk(KERN_DEBUG msg);} ++/** Print message */ ++#define PRINTM_MSG(msg...) {if (drvdbg & DBG_MSG) printk(KERN_ALERT msg);} ++/** Print level */ ++#define PRINTM(level,msg...) PRINTM_##level(msg) ++ ++#else ++ ++#define PRINTM(level,msg...) do {} while (0) ++ ++#endif /* DEBUG_LEVEL1 */ ++ ++/** Wait until a condition becomes true */ ++#define ASSERT(cond) \ ++do { \ ++ if (!(cond)) \ ++ PRINTM(INFO, "ASSERT: %s, %s:%i\n", \ ++ __FUNCTION__, __FILE__, __LINE__); \ ++} while(0) ++ ++/** Log enrty point for debugging */ ++#define ENTER() PRINTM(ENTRY, "Enter: %s, %s:%i\n", __FUNCTION__, \ ++ __FILE__, __LINE__) ++/** Log exit point for debugging */ ++#define LEAVE() PRINTM(ENTRY, "Leave: %s, %s:%i\n", __FUNCTION__, \ ++ __FILE__, __LINE__) ++ ++#ifdef DEBUG_LEVEL1 ++/** Dump buffer length */ ++#define DBG_DUMP_BUF_LEN 64 ++/** Maximum dump per line */ ++#define MAX_DUMP_PER_LINE 16 ++/** Data dump length */ ++#define DATA_DUMP_LEN 32 ++ ++static inline void ++hexdump(char *prompt, u8 * buf, int len) ++{ ++ int i; ++ char dbgdumpbuf[DBG_DUMP_BUF_LEN]; ++ char *ptr = dbgdumpbuf; ++ ++ printk(KERN_DEBUG "%s:\n", prompt); ++ for (i = 1; i <= len; i++) { ++ ptr += sprintf(ptr, "%02x ", *buf); ++ buf++; ++ if (i % MAX_DUMP_PER_LINE == 0) { ++ *ptr = 0; ++ printk(KERN_DEBUG "%s\n", dbgdumpbuf); ++ ptr = dbgdumpbuf; ++ } ++ } ++ if (len % MAX_DUMP_PER_LINE) { ++ *ptr = 0; ++ printk(KERN_DEBUG "%s\n", dbgdumpbuf); ++ } ++} ++ ++/** Debug command */ ++#define DBG_HEXDUMP_CMD_D(x,y,z) {if (drvdbg & DBG_CMD_D) hexdump(x,y,z);} ++/** Debug data */ ++#define DBG_HEXDUMP_DAT_D(x,y,z) {if (drvdbg & DBG_DAT_D) hexdump(x,y,z);} ++/** Debug hexdump */ ++#define DBG_HEXDUMP(level,x,y,z) DBG_HEXDUMP_##level(x,y,z) ++/** hexdump */ ++#define HEXDUMP(x,y,z) {if (drvdbg & DBG_INFO) hexdump(x,y,z);} ++#else ++/** Do nothing since debugging is not turned on */ ++#define DBG_HEXDUMP(level,x,y,z) do {} while (0) ++/** Do nothing since debugging is not turned on */ ++#define HEXDUMP(x,y,z) do {} while (0) ++#endif ++ ++/** ++ * Typedefs ++ */ ++/** Unsigned char */ ++typedef u8 BOOLEAN; ++ ++/* ++ * OS macro definitions ++ */ ++/** OS macro to get time */ ++#define os_time_get() jiffies ++ ++/** OS macro to update transfer start time */ ++#define UpdateTransStart(dev) { \ ++ dev->trans_start = jiffies; \ ++} ++ ++/** Try to get a reference to the module */ ++#define MODULE_GET try_module_get(THIS_MODULE) ++/** Decrease module reference count */ ++#define MODULE_PUT module_put(THIS_MODULE) ++ ++/** OS macro to initialize semaphore */ ++#define OS_INIT_SEMAPHORE(x) sema_init(x,1) ++/** OS macro to acquire blocking semaphore */ ++#define OS_ACQ_SEMAPHORE_BLOCK(x) down_interruptible(x) ++/** OS macro to acquire non-blocking semaphore */ ++#define OS_ACQ_SEMAPHORE_NOBLOCK(x) down_trylock(x) ++/** OS macro to release semaphore */ ++#define OS_REL_SEMAPHORE(x) up(x) ++ ++static inline void ++os_sched_timeout(u32 millisec) ++{ ++ set_current_state(TASK_INTERRUPTIBLE); ++ schedule_timeout((millisec * HZ) / 1000); ++} ++ ++/** Maximum size of ethernet packet */ ++#define MRVDRV_MAXIMUM_ETH_PACKET_SIZE 1514 ++ ++/** Maximum size of multicast list */ ++#define MRVDRV_MAX_MULTICAST_LIST_SIZE 32 ++ ++/** Find minimum */ ++#ifndef MIN ++#define MIN(a,b) ((a) < (b) ? (a) : (b)) ++#endif ++ ++/** Find maximum */ ++#ifndef MAX ++#define MAX(a,b) ((a) > (b) ? (a) : (b)) ++#endif ++ ++/** Find number of elements */ ++#ifndef NELEMENTS ++#define NELEMENTS(x) (sizeof(x)/sizeof(x[0])) ++#endif ++ ++/** Buffer Constants */ ++ ++/** Size of command buffer */ ++#define MRVDRV_SIZE_OF_CMD_BUFFER (2 * 1024) ++ ++/** Length of device length */ ++#define DEV_NAME_LEN 32 ++ ++/** Length of ethernet address */ ++#ifndef ETH_ALEN ++#define ETH_ALEN 6 ++#endif ++ ++/** Default watchdog timeout */ ++#define MRVDRV_DEFAULT_WATCHDOG_TIMEOUT (2 * HZ) ++ ++/** Success */ ++#define UAP_STATUS_SUCCESS (0) ++/** Failure */ ++#define UAP_STATUS_FAILURE (-1) ++/** Not accepted */ ++#define UAP_STATUS_NOT_ACCEPTED (-2) ++ ++/** Max loop count (* 100ms) for waiting device ready at init time */ ++#define MAX_WAIT_DEVICE_READY_COUNT 50 ++ ++/** Tx high watermark. Stop Tx queue after this is crossed */ ++#define TX_HIGH_WATERMARK 4 ++/** Tx low watermark. Restart Tx queue after this is crossed */ ++#define TX_LOW_WATERMARK 2 ++ ++/** Netlink protocol number */ ++#define NETLINK_MARVELL (MAX_LINKS - 1) ++/** Netlink maximum payload size */ ++#define NL_MAX_PAYLOAD 1024 ++/** Netlink multicast group number */ ++#define NL_MULTICAST_GROUP 1 ++ ++/** 20 seconds */ ++#define MRVDRV_TIMER_20S 20000 ++ ++/** Host Command option for wait till Send */ ++#define HostCmd_OPTION_WAITFORSEND 0x0001 ++/** Host Command option for wait for RSP */ ++#define HostCmd_OPTION_WAITFORRSP 0x0002 ++/** Host Command option for wait for RSP or Timeout */ ++#define HostCmd_OPTION_WAITFORRSP_TIMEOUT 0x0003 ++/** Host Command option for wait for RSP of sleep confirm */ ++#define HostCmd_OPTION_WAITFORRSP_SLEEPCONFIRM 0x0004 ++ ++/** Sleep until a condition gets true or a timeout elapses */ ++#define os_wait_interruptible_timeout(waitq, cond, timeout) \ ++ wait_event_interruptible_timeout(waitq, cond, ((timeout) * HZ / 1000)) ++ ++/** Private command ID to Host command */ ++#define UAPHOSTCMD (SIOCDEVPRIVATE + 1) ++ ++/** Private command ID to Power Mode */ ++#define UAP_POWER_MODE (SIOCDEVPRIVATE + 3) ++/** sleep_param */ ++typedef struct _ps_sleep_param ++{ ++ /** control bitmap */ ++ u32 ctrl_bitmap; ++ /** minimum sleep period (micro second) */ ++ u32 min_sleep; ++ /** maximum sleep period (micro second) */ ++ u32 max_sleep; ++} ps_sleep_param; ++ ++/** inactivity sleep_param */ ++typedef struct _inact_sleep_param ++{ ++ /** inactivity timeout (micro second) */ ++ u32 inactivity_to; ++ /** miniumu awake period (micro second) */ ++ u32 min_awake; ++ /** maximum awake period (micro second) */ ++ u32 max_awake; ++} inact_sleep_param; ++ ++/** flag for ps mode */ ++#define PS_FLAG_PS_MODE 1 ++/** flag for sleep param */ ++#define PS_FLAG_SLEEP_PARAM 2 ++/** flag for inactivity sleep param */ ++#define PS_FLAG_INACT_SLEEP_PARAM 4 ++ ++/** Disable power mode */ ++#define PS_MODE_DISABLE 0 ++/** Enable periodic dtim ps */ ++#define PS_MODE_PERIODIC_DTIM 1 ++/** Enable inactivity ps */ ++#define PS_MODE_INACTIVITY 2 ++ ++/** sleep parameter */ ++#define SLEEP_PARAMETER 1 ++/** inactivity sleep parameter */ ++#define INACTIVITY_SLEEP_PARAMETER 2 ++/** ps_mgmt */ ++typedef struct _ps_mgmt ++{ ++ /** flags for valid field */ ++ u16 flags; ++ /** power mode */ ++ u16 ps_mode; ++ /** sleep param */ ++ ps_sleep_param sleep_param; ++ /** inactivity sleep param */ ++ inact_sleep_param inact_param; ++} ps_mgmt; ++ ++/** Semaphore structure */ ++typedef struct semaphore SEMAPHORE; ++ ++/** Global Varibale Declaration */ ++/** Private data structure of the device */ ++typedef struct _uap_private uap_private; ++/** Adapter data structure of the device */ ++typedef struct _uap_adapter uap_adapter; ++/** private structure */ ++extern uap_private *uappriv; ++ ++/** ENUM definition*/ ++ ++/** Hardware status codes */ ++typedef enum _HARDWARE_STATUS ++{ ++ HWReady, ++ HWInitializing, ++ HWReset, ++ HWClosing, ++ HWNotReady ++} HARDWARE_STATUS; ++ ++/** info for debug purpose */ ++typedef struct _uap_dbg ++{ ++ /** Number of host to card command failures */ ++ u32 num_cmd_host_to_card_failure; ++ /** Number of host to card Tx failures */ ++ u32 num_tx_host_to_card_failure; ++} uap_dbg; ++ ++/** Set thread state */ ++#define OS_SET_THREAD_STATE(x) set_current_state(x) ++ ++typedef struct ++{ ++ /** Task */ ++ struct task_struct *task; ++ /** Queue */ ++ wait_queue_head_t waitQ; ++ /** PID */ ++ pid_t pid; ++ /** Private structure */ ++ void *priv; ++} uap_thread; ++ ++static inline void ++uap_activate_thread(uap_thread * thr) ++{ ++ /** Record the thread pid */ ++ thr->pid = current->pid; ++ ++ /** Initialize the wait queue */ ++ init_waitqueue_head(&thr->waitQ); ++} ++ ++static inline void ++uap_deactivate_thread(uap_thread * thr) ++{ ++ thr->pid = 0; ++ return; ++} ++ ++static inline void ++uap_create_thread(int (*uapfunc) (void *), uap_thread * thr, char *name) ++{ ++ thr->task = kthread_run(uapfunc, thr, "%s", name); ++} ++ ++static inline int ++uap_terminate_thread(uap_thread * thr) ++{ ++ /* Check if the thread is active or not */ ++ if (!thr->pid) ++ return -1; ++ kthread_stop(thr->task); ++ return 0; ++} ++ ++/** Data structure for the Marvell uAP device */ ++typedef struct _uap_dev ++{ ++ /** device name */ ++ char name[DEV_NAME_LEN]; ++ /** card pointer */ ++ void *card; ++ /** IO port */ ++ u32 ioport; ++ /** Rx unit */ ++ u8 rx_unit; ++ /** Data sent: ++ TRUE - Data is sent to fw, no Tx Done received ++ FALSE - Tx done received for previous Tx */ ++ BOOLEAN data_sent; ++ /** CMD sent: ++ TRUE - CMD is sent to fw, no CMD Done received ++ FALSE - CMD done received for previous CMD */ ++ BOOLEAN cmd_sent; ++ /** netdev pointer */ ++ struct net_device *netdev; ++} uap_dev_t, *puap_dev_t; ++ ++/** Private structure for the MV device */ ++struct _uap_private ++{ ++ /** Device open */ ++ int open; ++ ++ /** Device adapter structure */ ++ uap_adapter *adapter; ++ /** Device structure */ ++ uap_dev_t uap_dev; ++ ++ /** Net device statistics structure */ ++ struct net_device_stats stats; ++ ++ /** Number of Tx timeouts */ ++ u32 num_tx_timeout; ++ ++ /** Media connection status */ ++ BOOLEAN MediaConnected; ++ ++#ifdef CONFIG_PROC_FS ++ struct proc_dir_entry *proc_uap; ++ struct proc_dir_entry *proc_entry; ++#endif /* CONFIG_PROC_FS */ ++ ++ /** Firmware helper */ ++ const struct firmware *fw_helper; ++ /** Firmware */ ++ const struct firmware *firmware; ++ /** Hotplug device */ ++ struct device *hotplug_device; ++ /** thread to service interrupts */ ++ uap_thread MainThread; ++ /** Driver lock */ ++ spinlock_t driver_lock; ++ /** Driver lock flags */ ++ ulong driver_flags; ++ ++}; ++ ++/** PS_CMD_ConfirmSleep */ ++typedef struct _PS_CMD_ConfirmSleep ++{ ++ /** SDIO Length */ ++ u16 SDLen; ++ /** SDIO Type */ ++ u16 SDType; ++ /** Command */ ++ u16 Command; ++ /** Size */ ++ u16 Size; ++ /** Sequence number */ ++ u16 SeqNum; ++ /** Result */ ++ u16 Result; ++} __ATTRIB_PACK__ PS_CMD_ConfirmSleep, *PPS_CMD_ConfirmSleep; ++ ++/** Wlan Adapter data structure*/ ++struct _uap_adapter ++{ ++ /** Power save confirm sleep command */ ++ PS_CMD_ConfirmSleep PSConfirmSleep; ++ /** Device status */ ++ HARDWARE_STATUS HardwareStatus; ++ /** Interrupt counter */ ++ u32 IntCounter; ++ /** Tx packet queue */ ++ struct sk_buff_head tx_queue; ++ /** Cmd packet queue */ ++ struct sk_buff_head cmd_queue; ++ /** Command sequence number */ ++ u16 SeqNum; ++ /** Command buffer */ ++ u8 *CmdBuf; ++ /** cmd pending flag */ ++ u8 cmd_pending; ++ /** cmd wait option */ ++ u8 cmd_wait_option; ++ /** Command buffer length */ ++ u32 CmdSize; ++ /** Command wait queue */ ++ wait_queue_head_t cmdwait_q __ATTRIB_ALIGN__; ++ /** Command wait queue state flag */ ++ u8 CmdWaitQWoken; ++ /** PnP support */ ++ BOOLEAN SurpriseRemoved; ++ /** Debug */ ++ uap_dbg dbg; ++ /** Netlink kernel socket */ ++ struct sock *nl_sk; ++ /** Semaphore for CMD */ ++ SEMAPHORE CmdSem; ++ /** Power Save mode */ ++ u8 psmode; ++ /** Power Save state */ ++ u8 ps_state; ++ /** Number of wakeup tries */ ++ u32 WakeupTries; ++}; ++ ++static inline int ++os_upload_rx_packet(uap_private * priv, struct sk_buff *skb) ++{ ++ skb->dev = priv->uap_dev.netdev; ++ skb->protocol = eth_type_trans(skb, priv->uap_dev.netdev); ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++ if (in_interrupt()) ++ netif_rx(skb); ++ else ++ netif_rx_ni(skb); ++ return 0; ++} ++ ++/* ++ * netif carrier_on/off and start(wake)/stop_queue handling ++ */ ++static inline void ++os_carrier_on(uap_private * priv) ++{ ++ if (!netif_carrier_ok(priv->uap_dev.netdev) && ++ (priv->MediaConnected == TRUE)) { ++ netif_carrier_on(priv->uap_dev.netdev); ++ } ++} ++ ++static inline void ++os_carrier_off(uap_private * priv) ++{ ++ if (netif_carrier_ok(priv->uap_dev.netdev)) { ++ netif_carrier_off(priv->uap_dev.netdev); ++ } ++} ++ ++static inline void ++os_start_queue(uap_private * priv) ++{ ++ if (netif_queue_stopped(priv->uap_dev.netdev) && ++ (priv->MediaConnected == TRUE)) { ++ netif_wake_queue(priv->uap_dev.netdev); ++ } ++} ++ ++static inline void ++os_stop_queue(uap_private * priv) ++{ ++ if (!netif_queue_stopped(priv->uap_dev.netdev)) { ++ netif_stop_queue(priv->uap_dev.netdev); ++ } ++} ++ ++/** Interface specific header */ ++#define INTF_HEADER_LEN 4 ++ ++/** headroom alignment for tx packet */ ++#define HEADER_ALIGNMENT 8 ++ ++/** The number of times to try when polling for status bits */ ++#define MAX_POLL_TRIES 100 ++ ++/** Length of SNAP header */ ++#define MRVDRV_SNAP_HEADER_LEN 8 ++ ++/** Extra length of Tx packet buffer */ ++#define EXTRA_LEN 36 ++ ++/** Buffer size for ethernet Tx packets */ ++#define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \ ++ (ETH_FRAME_LEN + sizeof(TxPD) + EXTRA_LEN) ++ ++/** Buffer size for ethernet Rx packets */ ++#define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \ ++ (ETH_FRAME_LEN + sizeof(RxPD) \ ++ + MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN) ++ ++/** Packet type: data, command & event */ ++typedef enum _mv_type ++{ ++ MV_TYPE_DAT = 0, ++ MV_TYPE_CMD = 1, ++ MV_TYPE_EVENT = 3 ++} mv_type; ++ ++/** Disable interrupt */ ++#define OS_INT_DISABLE spin_lock_irqsave(&priv->driver_lock, priv->driver_flags) ++/** Enable interrupt */ ++#define OS_INT_RESTORE spin_unlock_irqrestore(&priv->driver_lock, priv->driver_flags) ++ ++int uap_process_rx_packet(uap_private * priv, struct sk_buff *skb); ++void uap_interrupt(uap_private * priv); ++uap_private *uap_add_card(void *card); ++int uap_remove_card(void *card); ++int uap_process_event(uap_private * priv, u8 * payload, uint len); ++int uap_soft_reset(uap_private * priv); ++int uap_process_sleep_confirm_resp(uap_private * priv, u8 * resp, int resp_len); ++ ++#ifdef CONFIG_PROC_FS ++/** The proc fs interface */ ++void uap_proc_entry(uap_private * priv, struct net_device *dev); ++void uap_proc_remove(uap_private * priv); ++int string_to_number(char *s); ++void uap_debug_entry(uap_private * priv, struct net_device *dev); ++void uap_debug_remove(uap_private * priv); ++#endif /* CONFIG_PROC_FS */ ++ ++int sbi_register(void); ++ ++void sbi_unregister(void); ++int sbi_register_dev(uap_private * priv); ++int sbi_unregister_dev(uap_private * priv); ++int sbi_prog_fw_w_helper(uap_private *); ++ ++int sbi_host_to_card(uap_private * priv, u8 * payload, u16 nb); ++int sbi_enable_host_int(uap_private * priv); ++int sbi_disable_host_int(uap_private * priv); ++ ++int sbi_get_int_status(uap_private * priv, u8 * ireg); ++/** Check firmware status */ ++int sbi_check_fw_status(uap_private *, int); ++int sbi_prog_helper(uap_private *); ++ ++int sbi_wakeup_firmware(uap_private * priv); ++ ++#endif /* _UAP_DRV_H */ +diff -Naupr linux-2.6.37/drivers/net/wireless/libertas_uap/uap_fw.h linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_fw.h +--- linux-2.6.37/drivers/net/wireless/libertas_uap/uap_fw.h 1969-12-31 17:00:00.000000000 -0700 ++++ linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_fw.h 2011-01-08 06:01:04.042835607 -0700 +@@ -0,0 +1,359 @@ ++/** @file uap_fw.h ++ * ++ * @brief This file contains firmware specific defines. ++ * ++ * Copyright (C) 2008-2009, Marvell International Ltd. ++ * ++ * This software file (the "File") is distributed by Marvell International ++ * Ltd. under the terms of the GNU General Public License Version 2, June 1991 ++ * (the "License"). You may use, redistribute and/or modify this File in ++ * accordance with the terms and conditions of the License, a copy of which ++ * is available along with the File in the gpl.txt file or by writing to ++ * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA ++ * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt. ++ * ++ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ++ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about ++ * this warranty disclaimer. ++ * ++ */ ++/******************************************************** ++Change log: ++ 02/26/08: Initial creation ++********************************************************/ ++ ++#ifndef _UAP_FW_H ++#define _UAP_FW_H ++ ++/** uap upload size */ ++#define UAP_UPLD_SIZE 2312 ++/** Packet type Micro AP */ ++#define PKT_TYPE_MICROAP 1 ++/** Packet type client */ ++#define PKT_TYPE_CLIENT 0 ++ ++/** TxPD descriptor */ ++typedef struct _TxPD ++{ ++ /** Bss Type */ ++ u8 BssType; ++ /** Bss num */ ++ u8 BssNum; ++ /** Tx packet length */ ++ u16 TxPktLength; ++ /** Tx packet offset */ ++ u16 TxPktOffset; ++ /** Tx packet type */ ++ u16 TxPktType; ++ /** Tx Control */ ++ u32 TxControl; ++ /** reserved */ ++ u32 reserved[2]; ++} __ATTRIB_PACK__ TxPD, *PTxPD; ++ ++/** RxPD Descriptor */ ++typedef struct _RxPD ++{ ++ /** Bss Type */ ++ u8 BssType; ++ /** Bss Num */ ++ u8 BssNum; ++ /** Tx packet length */ ++ u16 RxPktLength; ++ /** Tx packet offset */ ++ u16 RxPktOffset; ++} __ATTRIB_PACK__ RxPD, *PRxPD; ++ ++#ifdef BIG_ENDIAN ++/** Convert from 16 bit little endian format to CPU format */ ++#define uap_le16_to_cpu(x) le16_to_cpu(x) ++/** Convert from 32 bit little endian format to CPU format */ ++#define uap_le32_to_cpu(x) le32_to_cpu(x) ++/** Convert from 64 bit little endian format to CPU format */ ++#define uap_le64_to_cpu(x) le64_to_cpu(x) ++/** Convert to 16 bit little endian format from CPU format */ ++#define uap_cpu_to_le16(x) cpu_to_le16(x) ++/** Convert to 32 bit little endian format from CPU format */ ++#define uap_cpu_to_le32(x) cpu_to_le32(x) ++/** Convert to 64 bit little endian format from CPU format */ ++#define uap_cpu_to_le64(x) cpu_to_le64(x) ++ ++/** Convert TxPD to little endian format from CPU format */ ++#define endian_convert_TxPD(x); \ ++ { \ ++ (x)->TxPktLength = uap_cpu_to_le16((x)->TxPktLength); \ ++ (x)->TxPktOffset = uap_cpu_to_le32((x)->TxPktOffset); \ ++ (x)->TxControl = uap_cpu_to_le32((x)->TxControl); \ ++ (x)->TxPktType = uap_cpu_to_le32((x)->TxPktType); \ ++ } ++ ++/** Convert RxPD from little endian format to CPU format */ ++#define endian_convert_RxPD(x); \ ++ { \ ++ (x)->RxPktLength = uap_le16_to_cpu((x)->RxPktLength); \ ++ (x)->RxPktOffset = uap_le32_to_cpu((x)->RxPktOffset); \ ++ } ++#else /* BIG_ENDIAN */ ++/** Do nothing */ ++#define uap_le16_to_cpu(x) x ++/** Do nothing */ ++#define uap_le32_to_cpu(x) x ++/** Do nothing */ ++#define uap_le64_to_cpu(x) x ++/** Do nothing */ ++#define uap_cpu_to_le16(x) x ++/** Do nothing */ ++#define uap_cpu_to_le32(x) x ++/** Do nothing */ ++#define uap_cpu_to_le64(x) x ++ ++/** Do nothing */ ++#define endian_convert_TxPD(x) ++/** Do nothing */ ++#define endian_convert_RxPD(x) ++#endif /* BIG_ENDIAN */ ++ ++/** Host Command ID : Function initialization */ ++#define HostCmd_CMD_FUNC_INIT 0x00a9 ++/** Host Command ID : Function shutdown */ ++#define HostCmd_CMD_FUNC_SHUTDOWN 0x00aa ++ ++/** Host Command id: SYS_INFO */ ++#define HOST_CMD_APCMD_SYS_INFO 0x00ae ++/** Host Command id: SYS_RESET */ ++#define HOST_CMD_APCMD_SYS_RESET 0x00af ++/** Host Command id: SYS_CONFIGURE */ ++#define HOST_CMD_APCMD_SYS_CONFIGURE 0x00b0 ++/** Host Command id: BSS_START */ ++#define HOST_CMD_APCMD_BSS_START 0x00b1 ++/** Host Command id: SYS_STOP */ ++#define HOST_CMD_APCMD_BSS_STOP 0x00b2 ++/** Host Command id: STA_LIST */ ++#define HOST_CMD_APCMD_STA_LIST 0x00b3 ++/** Host Command id: STA_FILTER_TABLE */ ++#define HOST_CMD_APCMD_STA_FILTER_TABLE 0x00b4 ++/** Host Command id: STA_DEAUTH */ ++#define HOST_CMD_APCMD_STA_DEAUTH 0x00b5 ++/** Host Command id: SOFT_RESET */ ++#define HOST_CMD_APCMD_SOFT_RESET 0x00d5 ++/** Host Command id: POWER_MGMT_EXT */ ++#define HOST_CMD_POWER_MGMT_EXT 0x00ef ++/** Host Command id: SLEEP_CONFIRM*/ ++#define HOST_CMD_SLEEP_CONFIRM 0x00d8 ++ ++/** TLV type : SSID */ ++#define TLV_TYPE_SSID 0x0000 ++/** TLV type : Rates */ ++#define TLV_TYPE_RATES 0x0001 ++/** TLV type : PHY DS */ ++#define TLV_TYPE_PHY_DS 0x0003 ++ ++/** TLV Id : Base id */ ++#define PROPRIETARY_TLV_BASE_ID 0x0100 ++/** TLV Id : AP_MAC_ADDRESS */ ++#define MRVL_AP_MAC_ADDRESS_TLV_ID (PROPRIETARY_TLV_BASE_ID + 43) ++/** TLV Id : Beacon period */ ++#define MRVL_BEACON_PERIOD_TLV_ID (PROPRIETARY_TLV_BASE_ID + 44) ++/** TLV Id : Dtim period */ ++#define MRVL_DTIM_PERIOD_TLV_ID (PROPRIETARY_TLV_BASE_ID + 45) ++/** TLV Id : Basic rates */ ++#define MRVL_BASIC_RATES_TLV_ID (PROPRIETARY_TLV_BASE_ID + 46) ++/** TLV Id : Tx Power */ ++#define MRVL_TX_POWER_TLV_ID (PROPRIETARY_TLV_BASE_ID + 47) ++/** TLV Id : Broadcast SSID control */ ++#define MRVL_BCAST_SSID_CTL_TLV_ID (PROPRIETARY_TLV_BASE_ID + 48) ++/** TLV Id : Preamble control */ ++#define MRVL_PREAMBLE_CTL_TLV_ID (PROPRIETARY_TLV_BASE_ID + 49) ++/** TLV Id : Antenna control */ ++#define MRVL_ANTENNA_CTL_TLV_ID (PROPRIETARY_TLV_BASE_ID + 50) ++/** TLV Id : RTS threshold */ ++#define MRVL_RTS_THRESHOLD_TLV_ID (PROPRIETARY_TLV_BASE_ID + 51) ++/** TLV Id : Radio control */ ++#define MRVL_RADIO_CTL_TLV_ID (PROPRIETARY_TLV_BASE_ID + 52) ++/** TLV Id : TX data rate */ ++#define MRVL_TX_DATA_RATE_TLV_ID (PROPRIETARY_TLV_BASE_ID + 53) ++/** TLV Id : Packet forward control */ ++#define MRVL_PKT_FWD_CTL_TLV_ID (PROPRIETARY_TLV_BASE_ID + 54) ++/** TLV Id : STA info */ ++#define MRVL_STA_INFO_TLV_ID (PROPRIETARY_TLV_BASE_ID + 55) ++/** TLV Id : STA MAC address filter */ ++#define MRVL_STA_MAC_ADDR_FILTER_TLV_ID (PROPRIETARY_TLV_BASE_ID + 56) ++/** TLV Id : STA ageout timer */ ++#define MRVL_STA_AGEOUT_TIMER_TLV_ID (PROPRIETARY_TLV_BASE_ID + 57) ++/** TLV Id : Security config */ ++#define MRVL_SECURITY_CFG_TLV_ID (PROPRIETARY_TLV_BASE_ID + 58) ++/** TLV Id : WEP KEY */ ++#define MRVL_WEP_KEY_TLV_ID (PROPRIETARY_TLV_BASE_ID + 59) ++/** TLV Id : WPA Passphrase */ ++#define MRVL_WPA_PASSPHRASE_TLV_ID (PROPRIETARY_TLV_BASE_ID + 60) ++ ++/** Action get */ ++#define ACTION_GET 0 ++/** Action set */ ++#define ACTION_SET 1 ++/** Length of ethernet address */ ++#ifndef ETH_ALEN ++#define ETH_ALEN 6 ++#endif ++ ++/** HostCmd_DS_GEN */ ++typedef struct ++{ ++ /** Command */ ++ u16 Command; ++ /** Size */ ++ u16 Size; ++ /** Sequence number */ ++ u16 SeqNum; ++ /** Result */ ++ u16 Result; ++} __ATTRIB_PACK__ HostCmd_DS_GEN; ++ ++/** Size of HostCmd_DS_GEN */ ++#define S_DS_GEN sizeof(HostCmd_DS_GEN) ++ ++/** _HostCmd_HEADER*/ ++typedef struct ++{ ++ /** Command Header : Command */ ++ u16 Command; ++ /** Command Header : Size */ ++ u16 Size; ++} __ATTRIB_PACK__ HostCmd_HEADER; ++ ++/** HostCmd_SYS_CONFIG */ ++typedef struct _HostCmd_SYS_CONFIG ++{ ++ /** CMD Action GET/SET*/ ++ u16 Action; ++ /** Tlv buffer */ ++ u8 TlvBuffer[0]; ++} __ATTRIB_PACK__ HostCmd_SYS_CONFIG; ++ ++/** HostCmd_DS_POWER_MGMT_EXT */ ++typedef struct _HostCmd_DS_POWER_MGMT_EXT ++{ ++ /** CMD Action Get/Set*/ ++ u16 action; ++ /** power mode */ ++ u16 power_mode; ++} __ATTRIB_PACK__ HostCmd_DS_POWER_MGMT_EXT; ++ ++/** _HostCmd_DS_COMMAND*/ ++typedef struct _HostCmd_DS_COMMAND ++{ ++ ++ /** Command Header : Command */ ++ u16 Command; ++ /** Command Header : Size */ ++ u16 Size; ++ /** Command Header : Sequence number */ ++ u16 SeqNum; ++ /** Command Header : Result */ ++ u16 Result; ++ /** Command Body */ ++ union ++ { ++ HostCmd_SYS_CONFIG sys_config; ++ HostCmd_DS_POWER_MGMT_EXT pm_cfg; ++ ++ } params; ++} __ATTRIB_PACK__ HostCmd_DS_COMMAND; ++ ++/** MrvlIEtypesHeader_*/ ++typedef struct _MrvlIEtypesHeader ++{ ++ /** Header type */ ++ u16 Type; ++ /** Header length */ ++ u16 Len; ++} __ATTRIB_PACK__ MrvlIEtypesHeader_t; ++ ++/** MrvlIEtypes_Data_t */ ++typedef struct _MrvlIEtypes_Data_t ++{ ++ /** Header */ ++ MrvlIEtypesHeader_t Header; ++ /** Data */ ++ u8 Data[1]; ++} __ATTRIB_PACK__ MrvlIEtypes_Data_t; ++ ++/** MrvlIEtypes_ChanListParamSet_t */ ++typedef struct _MrvlIEtypes_MacAddr_t ++{ ++ /** Header */ ++ MrvlIEtypesHeader_t Header; ++ /** AP MAC address */ ++ u8 ApMacAddr[ETH_ALEN]; ++} __ATTRIB_PACK__ MrvlIEtypes_MacAddr_t; ++ ++/** Event ID: BSS started */ ++#define MICRO_AP_EV_ID_BSS_START 46 ++ ++/** Event ID: BSS idle event */ ++#define MICRO_AP_EV_BSS_IDLE 67 ++ ++/** Event ID: BSS active event */ ++#define MICRO_AP_EV_BSS_ACTIVE 68 ++ ++/** Event ID: PS_AWAKE */ ++#define EVENT_PS_AWAKE 0x0a ++ ++/** Event ID: PS_SLEEP */ ++#define EVENT_PS_SLEEP 0x0b ++ ++/** PS_STATE */ ++typedef enum _PS_STATE ++{ ++ PS_STATE_AWAKE, ++ PS_STATE_PRE_SLEEP, ++ PS_STATE_SLEEP ++} PS_STATE; ++ ++/** TLV type: AP Sleep param */ ++#define TLV_TYPE_AP_SLEEP_PARAM (PROPRIETARY_TLV_BASE_ID + 106) ++/** TLV type: AP Inactivity Sleep param */ ++#define TLV_TYPE_AP_INACT_SLEEP_PARAM (PROPRIETARY_TLV_BASE_ID + 107) ++ ++/** MrvlIEtypes_sleep_param_t */ ++typedef struct _MrvlIEtypes_sleep_param_t ++{ ++ /** Header */ ++ MrvlIEtypesHeader_t header; ++ /** control bitmap */ ++ u32 ctrl_bitmap; ++ /** min_sleep */ ++ u32 min_sleep; ++ /** max_sleep */ ++ u32 max_sleep; ++} __ATTRIB_PACK__ MrvlIEtypes_sleep_param_t; ++ ++/** MrvlIEtypes_inact_sleep_param_t */ ++typedef struct _MrvlIEtypes_inact_sleep_param_t ++{ ++ /** Header */ ++ MrvlIEtypesHeader_t header; ++ /** inactivity timeout */ ++ u32 inactivity_to; ++ /** min_awake */ ++ u32 min_awake; ++ /** max_awake */ ++ u32 max_awake; ++} __ATTRIB_PACK__ MrvlIEtypes_inact_sleep_param_t; ++ ++/** AP_Event */ ++typedef struct _AP_Event ++{ ++ /** Event ID */ ++ u32 EventId; ++ /* ++ * Reserved for STA_ASSOCIATED event and contains ++ * status information for the MIC_COUNTERMEASURES event. ++ */ ++ /** Reserved/status */ ++ u16 status; ++ /** AP MAC address */ ++ u8 MacAddr[ETH_ALEN]; ++} __ATTRIB_PACK__ AP_Event; ++#endif /* _UAP_FW_H */ +diff -Naupr linux-2.6.37/drivers/net/wireless/libertas_uap/uap_headers.h linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_headers.h +--- linux-2.6.37/drivers/net/wireless/libertas_uap/uap_headers.h 1969-12-31 17:00:00.000000000 -0700 ++++ linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_headers.h 2011-01-08 06:01:04.043835537 -0700 +@@ -0,0 +1,64 @@ ++/** @file uap_headers.h ++ * ++ * @brief This file contains all the necessary include file. ++ * ++ * Copyright (C) 2008-2009, Marvell International Ltd. ++ * ++ * This software file (the "File") is distributed by Marvell International ++ * Ltd. under the terms of the GNU General Public License Version 2, June 1991 ++ * (the "License"). You may use, redistribute and/or modify this File in ++ * accordance with the terms and conditions of the License, a copy of which ++ * is available along with the File in the gpl.txt file or by writing to ++ * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA ++ * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt. ++ * ++ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ++ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about ++ * this warranty disclaimer. ++ * ++ */ ++#ifndef _UAP_HEADERS_H ++#define _UAP_HEADERS_H ++ ++/* Linux header files */ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/version.h> ++#include <linux/param.h> ++#include <linux/types.h> ++#include <linux/interrupt.h> ++#include <linux/proc_fs.h> ++#include <linux/kthread.h> ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27) ++#include <linux/semaphore.h> ++#else ++#include <asm/semaphore.h> ++#endif ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ++#include <linux/config.h> ++#endif ++ ++/* Net header files */ ++#include <linux/netdevice.h> ++#include <linux/net.h> ++#include <linux/skbuff.h> ++#include <linux/if_ether.h> ++#include <linux/etherdevice.h> ++#include <net/sock.h> ++#include <linux/netlink.h> ++#include <linux/firmware.h> ++#include <linux/delay.h> ++ ++#include "uap_drv.h" ++#include "uap_fw.h" ++ ++#include <linux/mmc/sdio.h> ++#include <linux/mmc/sdio_ids.h> ++#include <linux/mmc/sdio_func.h> ++#include <linux/mmc/card.h> ++#include "uap_sdio_mmc.h" ++ ++#endif /* _UAP_HEADERS_H */ +diff -Naupr linux-2.6.37/drivers/net/wireless/libertas_uap/uap_main.c linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_main.c +--- linux-2.6.37/drivers/net/wireless/libertas_uap/uap_main.c 1969-12-31 17:00:00.000000000 -0700 ++++ linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_main.c 2011-01-08 06:01:04.048835193 -0700 +@@ -0,0 +1,1830 @@ ++/** @file uap_main.c ++ * @brief This file contains the major functions in uAP ++ * driver. It includes init, exit etc.. ++ * This file also contains the initialization for SW, ++ * FW and HW ++ * ++ * Copyright (C) 2008-2009, Marvell International Ltd. ++ * ++ * This software file (the "File") is distributed by Marvell International ++ * Ltd. under the terms of the GNU General Public License Version 2, June 1991 ++ * (the "License"). You may use, redistribute and/or modify this File in ++ * accordance with the terms and conditions of the License, a copy of which ++ * is available along with the File in the gpl.txt file or by writing to ++ * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA ++ * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt. ++ * ++ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ++ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about ++ * this warranty disclaimer. ++ * ++ */ ++/** ++ * @mainpage uAP Linux Driver ++ * ++ * @section overview_sec Overview ++ * ++ * This is Linux reference driver for Marvell uAP. ++ * ++ * @section copyright_sec Copyright ++ * ++ * Copyright (C) 2008, Marvell International Ltd. ++ * ++ */ ++ ++#include "uap_headers.h" ++ ++/** ++ * the global variable of a pointer to uap_private ++ * structure variable ++ */ ++uap_private *uappriv = NULL; ++#ifdef DEBUG_LEVEL1 ++#define DEFAULT_DEBUG_MASK (DBG_MSG | DBG_FATAL | DBG_ERROR) ++u32 drvdbg = DEFAULT_DEBUG_MASK; ++#endif ++/** Helper name */ ++char *helper_name = NULL; ++/** Firmware name */ ++char *fw_name = NULL; ++ ++/** Semaphore for add/remove card */ ++SEMAPHORE AddRemoveCardSem; ++ ++/******************************************************** ++ Local Functions ++********************************************************/ ++/** ++ * @brief This function send sleep confirm command to firmware ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS for success otherwise UAP_STATUS_FAILURE ++ */ ++static int ++uap_dnld_sleep_confirm_cmd(uap_private * priv) ++{ ++ uap_adapter *Adapter = priv->adapter; ++ int ret = UAP_STATUS_SUCCESS; ++ ENTER(); ++ PRINTM(CMND, "Sleep confirm\n"); ++ Adapter->cmd_pending = TRUE; ++ Adapter->cmd_wait_option = HostCmd_OPTION_WAITFORRSP_SLEEPCONFIRM; ++ ret = ++ sbi_host_to_card(priv, (u8 *) & Adapter->PSConfirmSleep, ++ sizeof(PS_CMD_ConfirmSleep)); ++ if (ret != UAP_STATUS_SUCCESS) { ++ Adapter->ps_state = PS_STATE_AWAKE; ++ Adapter->cmd_pending = FALSE; ++ Adapter->cmd_wait_option = FALSE; ++ } ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function process sleep confirm resp from firmware ++ * ++ * @param priv A pointer to uap_private structure ++ * @param resp A pointer to resp buf ++ * @param resp_len resp buf len ++ * @return UAP_STATUS_SUCCESS for success otherwise UAP_STATUS_FAILURE ++ */ ++int ++uap_process_sleep_confirm_resp(uap_private * priv, u8 * resp, int resp_len) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ HostCmd_DS_COMMAND *cmd; ++ uap_adapter *Adapter = priv->adapter; ++ ENTER(); ++ PRINTM(CMND, "Sleep confirm resp\n"); ++ if (!resp_len) { ++ PRINTM(ERROR, "Cmd Size is 0\n"); ++ ret = -EFAULT; ++ goto done; ++ } ++ cmd = (HostCmd_DS_COMMAND *) resp; ++ cmd->Result = uap_le16_to_cpu(cmd->Result); ++ if (cmd->Result != UAP_STATUS_SUCCESS) { ++ PRINTM(ERROR, "HOST_CMD_APCMD_PS_SLEEP_CONFIRM fail=%x\n", cmd->Result); ++ ret = -EFAULT; ++ } ++ done: ++ if (ret == UAP_STATUS_SUCCESS) ++ Adapter->ps_state = PS_STATE_SLEEP; ++ else ++ Adapter->ps_state = PS_STATE_AWAKE; ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function checks condition and prepares to ++ * send sleep confirm command to firmware if OK. ++ * ++ * @param priv A pointer to uap_private structure ++ * @return n/a ++ */ ++static void ++uap_ps_cond_check(uap_private * priv) ++{ ++ uap_adapter *Adapter = priv->adapter; ++ ++ ENTER(); ++ if (!priv->uap_dev.cmd_sent && ++ !Adapter->cmd_pending && !Adapter->IntCounter) { ++ uap_dnld_sleep_confirm_cmd(priv); ++ } else { ++ PRINTM(INFO, "Delay Sleep Confirm (%s%s%s)\n", ++ (priv->uap_dev.cmd_sent) ? "D" : "", ++ (Adapter->cmd_pending) ? "C" : "", ++ (Adapter->IntCounter) ? "I" : ""); ++ } ++ LEAVE(); ++} ++ ++/** ++ * @brief This function add cmd to cmdQ and waiting for response ++ * ++ * @param priv A pointer to uap_private structure ++ * @param skb A pointer to the skb for process ++ * @param wait_option Wait option ++ * @return UAP_STATUS_SUCCESS for success otherwise UAP_STATUS_FAILURE ++ */ ++static int ++uap_process_cmd(uap_private * priv, struct sk_buff *skb, u8 wait_option) ++{ ++ uap_adapter *Adapter = priv->adapter; ++ int ret = UAP_STATUS_SUCCESS; ++ HostCmd_DS_COMMAND *cmd; ++ u8 *headptr; ++ ENTER(); ++ if (Adapter->HardwareStatus != HWReady) { ++ PRINTM(ERROR, "Hw not ready, uap_process_cmd\n"); ++ kfree(skb); ++ LEAVE(); ++ return -EFAULT; ++ } ++ skb->cb[0] = wait_option; ++ headptr = skb->data; ++ *(u16 *) & headptr[0] = uap_cpu_to_le16(skb->len); ++ *(u16 *) & headptr[2] = uap_cpu_to_le16(MV_TYPE_CMD); ++ cmd = (HostCmd_DS_COMMAND *) (skb->data + INTF_HEADER_LEN); ++ Adapter->SeqNum++; ++ cmd->SeqNum = uap_cpu_to_le16(Adapter->SeqNum); ++ PRINTM(CMND, "process_cmd: %x\n", cmd->Command); ++ DBG_HEXDUMP(CMD_D, "process_cmd", (u8 *) cmd, cmd->Size); ++ if (!wait_option) { ++ skb_queue_tail(&priv->adapter->cmd_queue, skb); ++ wake_up_interruptible(&priv->MainThread.waitQ); ++ LEAVE(); ++ return ret; ++ } ++ if (OS_ACQ_SEMAPHORE_BLOCK(&Adapter->CmdSem)) { ++ PRINTM(ERROR, "Acquire semaphore error, uap_prepare_cmd\n"); ++ kfree(skb); ++ LEAVE(); ++ return -EBUSY; ++ } ++ skb_queue_tail(&priv->adapter->cmd_queue, skb); ++ Adapter->CmdWaitQWoken = FALSE; ++ wake_up_interruptible(&priv->MainThread.waitQ); ++ /* Sleep until response is generated by FW */ ++ if (wait_option == HostCmd_OPTION_WAITFORRSP_TIMEOUT) { ++ if (!os_wait_interruptible_timeout ++ (Adapter->cmdwait_q, Adapter->CmdWaitQWoken, MRVDRV_TIMER_20S)) { ++ PRINTM(ERROR, "Cmd timeout\n"); ++ Adapter->cmd_pending = FALSE; ++ ret = -EFAULT; ++ } ++ } else ++ wait_event_interruptible(Adapter->cmdwait_q, Adapter->CmdWaitQWoken); ++ OS_REL_SEMAPHORE(&Adapter->CmdSem); ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief Inspect the response buffer for pointers to expected TLVs ++ * ++ * ++ * @param pTlv Pointer to the start of the TLV buffer to parse ++ * @param tlvBufSize Size of the TLV buffer ++ * @param reqTlvType request tlv's tlvtype ++ * @param ppTlv Output parameter: Pointer to the request TLV if found ++ * ++ * @return void ++ */ ++static void ++uap_get_tlv_ptrs(MrvlIEtypes_Data_t * pTlv, int tlvBufSize, ++ u16 reqTlvType, MrvlIEtypes_Data_t ** ppTlv) ++{ ++ MrvlIEtypes_Data_t *pCurrentTlv; ++ int tlvBufLeft; ++ u16 tlvType; ++ u16 tlvLen; ++ ++ ENTER(); ++ pCurrentTlv = pTlv; ++ tlvBufLeft = tlvBufSize; ++ *ppTlv = NULL; ++ PRINTM(INFO, "uap_get_tlv: tlvBufSize = %d, reqTlvType=%x\n", tlvBufSize, ++ reqTlvType); ++ while (tlvBufLeft >= sizeof(MrvlIEtypesHeader_t)) { ++ tlvType = uap_le16_to_cpu(pCurrentTlv->Header.Type); ++ tlvLen = uap_le16_to_cpu(pCurrentTlv->Header.Len); ++ if (reqTlvType == tlvType) ++ *ppTlv = (MrvlIEtypes_Data_t *) pCurrentTlv; ++ if (*ppTlv) { ++ HEXDUMP("TLV Buf", (u8 *) * ppTlv, tlvLen); ++ break; ++ } ++ tlvBufLeft -= (sizeof(pTlv->Header) + tlvLen); ++ pCurrentTlv = (MrvlIEtypes_Data_t *) (pCurrentTlv->Data + tlvLen); ++ } /* while */ ++ LEAVE(); ++} ++ ++/** ++ * @brief This function get mac ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS on success, otherwise failure code ++ */ ++static int ++uap_get_mac_address(uap_private * priv) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ u32 CmdSize; ++ HostCmd_DS_COMMAND *cmd; ++ uap_adapter *Adapter = priv->adapter; ++ struct sk_buff *skb; ++ MrvlIEtypes_MacAddr_t *pMacAddrTlv; ++ MrvlIEtypes_Data_t *pTlv; ++ u16 tlvBufSize; ++ ENTER(); ++ skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER); ++ if (!skb) { ++ PRINTM(ERROR, "No free skb\n"); ++ ret = -ENOMEM; ++ goto done; ++ } ++ CmdSize = ++ S_DS_GEN + sizeof(HostCmd_SYS_CONFIG) + sizeof(MrvlIEtypes_MacAddr_t); ++ cmd = (HostCmd_DS_COMMAND *) (skb->data + INTF_HEADER_LEN); ++ cmd->Command = uap_cpu_to_le16(HOST_CMD_APCMD_SYS_CONFIGURE); ++ cmd->Size = uap_cpu_to_le16(CmdSize); ++ cmd->params.sys_config.Action = uap_cpu_to_le16(ACTION_GET); ++ pMacAddrTlv = ++ (MrvlIEtypes_MacAddr_t *) (skb->data + INTF_HEADER_LEN + S_DS_GEN + ++ sizeof(HostCmd_SYS_CONFIG)); ++ pMacAddrTlv->Header.Type = uap_cpu_to_le16(MRVL_AP_MAC_ADDRESS_TLV_ID); ++ pMacAddrTlv->Header.Len = uap_cpu_to_le16(ETH_ALEN); ++ skb_put(skb, CmdSize + INTF_HEADER_LEN); ++ if (UAP_STATUS_SUCCESS != ++ uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP_TIMEOUT)) { ++ PRINTM(ERROR, "Fail to process cmd SYS_CONFIGURE Query\n"); ++ ret = -EFAULT; ++ goto done; ++ } ++ if (!Adapter->CmdSize) { ++ PRINTM(ERROR, "Cmd Size is 0\n"); ++ ret = -EFAULT; ++ goto done; ++ } ++ cmd = (HostCmd_DS_COMMAND *) Adapter->CmdBuf; ++ cmd->Result = uap_le16_to_cpu(cmd->Result); ++ if (cmd->Result != UAP_STATUS_SUCCESS) { ++ PRINTM(ERROR, "uap_get_mac_address fail=%x\n", cmd->Result); ++ ret = -EFAULT; ++ goto done; ++ } ++ pTlv = ++ (MrvlIEtypes_Data_t *) (Adapter->CmdBuf + S_DS_GEN + ++ sizeof(HostCmd_SYS_CONFIG)); ++ tlvBufSize = Adapter->CmdSize - S_DS_GEN - sizeof(HostCmd_SYS_CONFIG); ++ uap_get_tlv_ptrs(pTlv, tlvBufSize, MRVL_AP_MAC_ADDRESS_TLV_ID, ++ (MrvlIEtypes_Data_t **) & pMacAddrTlv); ++ if (pMacAddrTlv) { ++ memcpy(priv->uap_dev.netdev->dev_addr, pMacAddrTlv->ApMacAddr, ++ ETH_ALEN); ++ HEXDUMP("Original MAC addr", priv->uap_dev.netdev->dev_addr, ETH_ALEN); ++ } ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function checks the conditions and sends packet to device ++ * ++ * @param priv A pointer to uap_private structure ++ * @param skb A pointer to the skb for process ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++uap_process_tx(uap_private * priv, struct sk_buff *skb) ++{ ++ uap_adapter *Adapter = priv->adapter; ++ int ret = UAP_STATUS_SUCCESS; ++ TxPD *pLocalTxPD; ++ u8 *headptr; ++ struct sk_buff *newskb; ++ int newheadlen; ++ ENTER(); ++ ASSERT(skb); ++ if (!skb) { ++ LEAVE(); ++ return UAP_STATUS_FAILURE; ++ } ++ if (skb_headroom(skb) < (sizeof(TxPD) + INTF_HEADER_LEN + HEADER_ALIGNMENT)) { ++ newheadlen = sizeof(TxPD) + INTF_HEADER_LEN + HEADER_ALIGNMENT; ++ PRINTM(WARN, "Tx: Insufficient skb headroom %d\n", skb_headroom(skb)); ++ /* Insufficient skb headroom - allocate a new skb */ ++ newskb = skb_realloc_headroom(skb, newheadlen); ++ if (unlikely(newskb == NULL)) { ++ PRINTM(ERROR, "Tx: Cannot allocate skb\n"); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ kfree_skb(skb); ++ skb = newskb; ++ PRINTM(INFO, "new skb headroom %d\n", skb_headroom(skb)); ++ } ++ /* headptr should be aligned */ ++ headptr = skb->data - sizeof(TxPD) - INTF_HEADER_LEN; ++ headptr = (u8 *) ((u32) headptr & ~((u32) (HEADER_ALIGNMENT - 1))); ++ ++ pLocalTxPD = (TxPD *) (headptr + INTF_HEADER_LEN); ++ memset(pLocalTxPD, 0, sizeof(TxPD)); ++ pLocalTxPD->BssType = PKT_TYPE_MICROAP; ++ pLocalTxPD->TxPktLength = skb->len; ++ /* offset of actual data */ ++ pLocalTxPD->TxPktOffset = (long) skb->data - (long) pLocalTxPD; ++ endian_convert_TxPD(pLocalTxPD); ++ *(u16 *) & headptr[0] = ++ uap_cpu_to_le16(skb->len + ((long) skb->data - (long) headptr)); ++ *(u16 *) & headptr[2] = uap_cpu_to_le16(MV_TYPE_DAT); ++ ret = ++ sbi_host_to_card(priv, headptr, ++ skb->len + ((long) skb->data - (long) headptr)); ++ if (ret) { ++ PRINTM(ERROR, "uap_process_tx Error: sbi_host_to_card failed: 0x%X\n", ++ ret); ++ Adapter->dbg.num_tx_host_to_card_failure++; ++ goto done; ++ } ++ PRINTM(DATA, "Data => FW\n"); ++ DBG_HEXDUMP(DAT_D, "Tx", headptr, ++ MIN(skb->len + sizeof(TxPD), DATA_DUMP_LEN)); ++ done: ++ /* Freed skb */ ++ kfree_skb(skb); ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function initializes the adapter structure ++ * and set default value to the member of adapter. ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++uap_init_sw(uap_private * priv) ++{ ++ uap_adapter *Adapter = priv->adapter; ++ ++ ENTER(); ++ ++ if (!(Adapter->CmdBuf = kmalloc(MRVDRV_SIZE_OF_CMD_BUFFER, GFP_KERNEL))) { ++ PRINTM(INFO, "Failed to allocate command buffer!\n"); ++ LEAVE(); ++ return UAP_STATUS_FAILURE; ++ } ++ ++ Adapter->cmd_pending = FALSE; ++ Adapter->CmdWaitQWoken = FALSE; ++ Adapter->ps_state = PS_STATE_AWAKE; ++ Adapter->WakeupTries = 0; ++ ++ memset(&Adapter->PSConfirmSleep, 0, sizeof(PS_CMD_ConfirmSleep)); ++ /** SDIO header */ ++ Adapter->PSConfirmSleep.SDLen = ++ uap_cpu_to_le16(sizeof(PS_CMD_ConfirmSleep)); ++ Adapter->PSConfirmSleep.SDType = uap_cpu_to_le16(MV_TYPE_CMD); ++ Adapter->PSConfirmSleep.SeqNum = 0; ++ Adapter->PSConfirmSleep.Command = uap_cpu_to_le16(HOST_CMD_SLEEP_CONFIRM); ++ Adapter->PSConfirmSleep.Size = uap_cpu_to_le16(sizeof(HostCmd_DS_GEN)); ++ Adapter->PSConfirmSleep.Result = 0; ++ ++ init_waitqueue_head(&Adapter->cmdwait_q); ++ OS_INIT_SEMAPHORE(&Adapter->CmdSem); ++ ++ skb_queue_head_init(&Adapter->tx_queue); ++ skb_queue_head_init(&Adapter->cmd_queue); ++ ++ /* Status variable */ ++ Adapter->HardwareStatus = HWInitializing; ++ ++ /* PnP support */ ++ Adapter->SurpriseRemoved = FALSE; ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ++ Adapter->nl_sk = netlink_kernel_create(NETLINK_MARVELL, ++ NL_MULTICAST_GROUP, NULL, ++ THIS_MODULE); ++#else ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ++ Adapter->nl_sk = netlink_kernel_create(NETLINK_MARVELL, ++ NL_MULTICAST_GROUP, NULL, NULL, ++ THIS_MODULE); ++#else ++ Adapter->nl_sk = netlink_kernel_create(&init_net, NETLINK_MARVELL, ++ NL_MULTICAST_GROUP, NULL, NULL, ++ THIS_MODULE); ++#endif ++#endif ++ if (!Adapter->nl_sk) { ++ PRINTM(ERROR, ++ "Could not initialize netlink event passing mechanism!\n"); ++ } ++ LEAVE(); ++ return UAP_STATUS_SUCCESS; ++} ++ ++/** ++ * @brief This function sends FUNC_INIT command to firmware ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS on success, otherwise failure code ++ */ ++static int ++uap_func_init(uap_private * priv) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ u32 CmdSize; ++ HostCmd_DS_GEN *cmd; ++ uap_adapter *Adapter = priv->adapter; ++ struct sk_buff *skb; ++ ENTER(); ++ if (Adapter->HardwareStatus != HWReady) { ++ PRINTM(ERROR, "uap_func_init:Hardware is not ready!\n"); ++ ret = -EFAULT; ++ goto done; ++ } ++ skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER); ++ if (!skb) { ++ PRINTM(ERROR, "No free skb\n"); ++ ret = -ENOMEM; ++ goto done; ++ } ++ CmdSize = sizeof(HostCmd_DS_GEN); ++ cmd = (HostCmd_DS_GEN *) (skb->data + INTF_HEADER_LEN); ++ cmd->Command = uap_cpu_to_le16(HostCmd_CMD_FUNC_INIT); ++ cmd->Size = uap_cpu_to_le16(CmdSize); ++ skb_put(skb, CmdSize + INTF_HEADER_LEN); ++ PRINTM(CMND, "HostCmd_CMD_FUNC_INIT\n"); ++ if (UAP_STATUS_SUCCESS != ++ uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP_TIMEOUT)) { ++ PRINTM(ERROR, "Fail to process cmd HostCmd_CMD_FUNC_INIT\n"); ++ ret = -EFAULT; ++ goto done; ++ } ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function sends FUNC_SHUTDOWN command to firmware ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS on success, otherwise failure code ++ */ ++static int __exit ++uap_func_shutdown(uap_private * priv) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ u32 CmdSize; ++ HostCmd_DS_GEN *cmd; ++ uap_adapter *Adapter = priv->adapter; ++ struct sk_buff *skb; ++ ENTER(); ++ if (Adapter->HardwareStatus != HWReady) { ++ PRINTM(ERROR, "uap_func_shutdown:Hardware is not ready!\n"); ++ ret = -EFAULT; ++ goto done; ++ } ++ skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER); ++ if (!skb) { ++ PRINTM(ERROR, "No free skb\n"); ++ ret = -ENOMEM; ++ goto done; ++ } ++ CmdSize = sizeof(HostCmd_DS_GEN); ++ cmd = (HostCmd_DS_GEN *) (skb->data + INTF_HEADER_LEN); ++ cmd->Command = uap_cpu_to_le16(HostCmd_CMD_FUNC_SHUTDOWN); ++ cmd->Size = uap_cpu_to_le16(CmdSize); ++ skb_put(skb, CmdSize + INTF_HEADER_LEN); ++ PRINTM(CMND, "HostCmd_CMD_FUNC_SHUTDOWN\n"); ++ if (UAP_STATUS_SUCCESS != ++ uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP_TIMEOUT)) { ++ PRINTM(ERROR, "Fail to process cmd HostCmd_CMD_FUNC_SHUTDOWN\n"); ++ ret = -EFAULT; ++ goto done; ++ } ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function initializes firmware ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++uap_init_fw(uap_private * priv) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ ENTER(); ++ sbi_disable_host_int(priv); ++ /* Check if firmware is already running */ ++ if (sbi_check_fw_status(priv, 1) == UAP_STATUS_SUCCESS) { ++ PRINTM(MSG, "UAP FW already running! Skip FW download\n"); ++ } else { ++ if ((ret = request_firmware(&priv->fw_helper, helper_name, ++ priv->hotplug_device)) < 0) { ++ PRINTM(FATAL, ++ "request_firmware() failed (helper), error code = %#x\n", ++ ret); ++ goto done; ++ } ++ ++ /* Download the helper */ ++ ret = sbi_prog_helper(priv); ++ ++ if (ret) { ++ PRINTM(FATAL, ++ "Bootloader in invalid state! Helper download failed!\n"); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ if ((ret = request_firmware(&priv->firmware, fw_name, ++ priv->hotplug_device)) < 0) { ++ PRINTM(FATAL, "request_firmware() failed, error code = %#x\n", ret); ++ goto done; ++ } ++ ++ /* Download the main firmware via the helper firmware */ ++ if (sbi_prog_fw_w_helper(priv)) { ++ PRINTM(FATAL, "UAP FW download failed!\n"); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ /* Check if the firmware is downloaded successfully or not */ ++ if (sbi_check_fw_status(priv, MAX_FIRMWARE_POLL_TRIES) == ++ UAP_STATUS_FAILURE) { ++ PRINTM(FATAL, "FW failed to be active in time!\n"); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ PRINTM(MSG, "UAP FW is active\n"); ++ } ++ sbi_enable_host_int(priv); ++ priv->adapter->HardwareStatus = HWReady; ++ if (uap_func_init(priv) != UAP_STATUS_SUCCESS) { ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ done: ++ if (priv->fw_helper) ++ release_firmware(priv->fw_helper); ++ if (priv->firmware) ++ release_firmware(priv->firmware); ++ LEAVE(); ++ return ret; ++ ++} ++ ++/** ++ * @brief This function frees the structure of adapter ++ * ++ * @param priv A pointer to uap_private structure ++ * @return n/a ++ */ ++static void ++uap_free_adapter(uap_private * priv) ++{ ++ uap_adapter *Adapter = priv->adapter; ++ ++ ENTER(); ++ ++ if (Adapter) { ++ if ((Adapter->nl_sk) && ((Adapter->nl_sk)->sk_socket)) { ++ sock_release((Adapter->nl_sk)->sk_socket); ++ Adapter->nl_sk = NULL; ++ } ++ if (Adapter->CmdBuf) ++ kfree(Adapter->CmdBuf); ++ skb_queue_purge(&priv->adapter->tx_queue); ++ skb_queue_purge(&priv->adapter->cmd_queue); ++ /* Free the adapter object itself */ ++ kfree(Adapter); ++ priv->adapter = NULL; ++ } ++ ++ LEAVE(); ++} ++ ++/** ++ * @brief This function handles the major job in uap driver. ++ * it handles the event generated by firmware, rx data received ++ * from firmware and tx data sent from kernel. ++ * ++ * @param data A pointer to uap_thread structure ++ * @return BT_STATUS_SUCCESS ++ */ ++static int ++uap_service_main_thread(void *data) ++{ ++ uap_thread *thread = data; ++ uap_private *priv = thread->priv; ++ uap_adapter *Adapter = priv->adapter; ++ wait_queue_t wait; ++ u8 ireg = 0; ++ struct sk_buff *skb; ++ ENTER(); ++ uap_activate_thread(thread); ++ init_waitqueue_entry(&wait, current); ++ current->flags |= PF_NOFREEZE; ++ ++ for (;;) { ++ add_wait_queue(&thread->waitQ, &wait); ++ OS_SET_THREAD_STATE(TASK_INTERRUPTIBLE); ++ if ((Adapter->WakeupTries) || ++ (!Adapter->IntCounter && Adapter->ps_state == PS_STATE_PRE_SLEEP) || ++ (!priv->adapter->IntCounter ++ && (priv->uap_dev.data_sent || ++ skb_queue_empty(&priv->adapter->tx_queue)) ++ && (priv->uap_dev.cmd_sent || Adapter->cmd_pending || ++ skb_queue_empty(&priv->adapter->cmd_queue)) ++ )) { ++ PRINTM(INFO, "Main: Thread sleeping...\n"); ++ schedule(); ++ } ++ OS_SET_THREAD_STATE(TASK_RUNNING); ++ remove_wait_queue(&thread->waitQ, &wait); ++ if (kthread_should_stop() || Adapter->SurpriseRemoved) { ++ PRINTM(INFO, "main-thread: break from main thread: " ++ "SurpriseRemoved=0x%x\n", Adapter->SurpriseRemoved); ++ /* Cancel pending command */ ++ if (Adapter->cmd_pending == TRUE) { ++ /* Wake up cmd Q */ ++ Adapter->CmdWaitQWoken = TRUE; ++ wake_up_interruptible(&Adapter->cmdwait_q); ++ } ++ break; ++ } ++ ++ PRINTM(INFO, "Main: Thread waking up...\n"); ++ if (priv->adapter->IntCounter) { ++ OS_INT_DISABLE; ++ Adapter->IntCounter = 0; ++ OS_INT_RESTORE; ++ sbi_get_int_status(priv, &ireg); ++ } else if ((priv->adapter->ps_state == PS_STATE_SLEEP) && ++ (!skb_queue_empty(&priv->adapter->cmd_queue) || ++ !skb_queue_empty(&priv->adapter->tx_queue))) { ++ priv->adapter->WakeupTries++; ++ PRINTM(CMND, "%lu : Wakeup device...\n", os_time_get()); ++ sbi_wakeup_firmware(priv); ++ continue; ++ } ++ if (Adapter->ps_state == PS_STATE_PRE_SLEEP) ++ uap_ps_cond_check(priv); ++ ++ /* The PS state is changed during processing of Sleep Request event ++ above */ ++ if ((Adapter->ps_state == PS_STATE_SLEEP) || ++ (Adapter->ps_state == PS_STATE_PRE_SLEEP)) ++ continue; ++ /* Execute the next command */ ++ if (!priv->uap_dev.cmd_sent && !Adapter->cmd_pending && ++ (Adapter->HardwareStatus == HWReady)) { ++ if (!skb_queue_empty(&priv->adapter->cmd_queue)) { ++ skb = skb_dequeue(&priv->adapter->cmd_queue); ++ if (skb) { ++ Adapter->CmdSize = 0; ++ Adapter->cmd_pending = TRUE; ++ Adapter->cmd_wait_option = skb->cb[0]; ++ if (sbi_host_to_card(priv, skb->data, skb->len)) { ++ PRINTM(ERROR, "Cmd:sbi_host_to_card failed!\n"); ++ Adapter->cmd_pending = FALSE; ++ Adapter->dbg.num_cmd_host_to_card_failure++; ++ /* Wake up cmd Q */ ++ Adapter->CmdWaitQWoken = TRUE; ++ wake_up_interruptible(&Adapter->cmdwait_q); ++ } else { ++ if (Adapter->cmd_wait_option == ++ HostCmd_OPTION_WAITFORSEND) { ++ /* Wake up cmd Q */ ++ Adapter->CmdWaitQWoken = TRUE; ++ wake_up_interruptible(&Adapter->cmdwait_q); ++ Adapter->cmd_wait_option = FALSE; ++ } ++ } ++ kfree_skb(skb); ++ } ++ } ++ } ++ if (!priv->uap_dev.data_sent && (Adapter->HardwareStatus == HWReady)) { ++ if (!skb_queue_empty(&priv->adapter->tx_queue)) { ++ skb = skb_dequeue(&priv->adapter->tx_queue); ++ if (skb) { ++ if (uap_process_tx(priv, skb)) { ++ priv->stats.tx_dropped++; ++ priv->stats.tx_errors++; ++ os_start_queue(priv); ++ } else { ++ priv->stats.tx_packets++; ++ priv->stats.tx_bytes += skb->len; ++ } ++ ++ } ++ } ++ } ++ } ++ uap_deactivate_thread(thread); ++ LEAVE(); ++ return UAP_STATUS_SUCCESS; ++} ++ ++/** ++ * @brief uap hostcmd ioctl handler ++ * ++ * @param dev A pointer to net_device structure ++ * @param req A pointer to ifreq structure ++ * @return UAP_STATUS_SUCCESS --success, otherwise fail ++ */ ++/********* format of ifr_data *************/ ++/* buf_len + Hostcmd_body */ ++/* buf_len: 4 bytes */ ++/* the length of the buf which */ ++/* can be used to return data */ ++/* to application */ ++/* Hostcmd_body */ ++/*******************************************/ ++static int ++uap_hostcmd_ioctl(struct net_device *dev, struct ifreq *req) ++{ ++ u32 buf_len; ++ HostCmd_HEADER head; ++ uap_private *priv = (uap_private *) netdev_priv(dev); ++ uap_adapter *Adapter = priv->adapter; ++ int ret = UAP_STATUS_SUCCESS; ++ struct sk_buff *skb; ++ ++ ENTER(); ++ ++ /* Sanity check */ ++ if (req->ifr_data == NULL) { ++ PRINTM(ERROR, "uap_hostcmd_ioctl() corrupt data\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ if (copy_from_user(&buf_len, req->ifr_data, sizeof(buf_len))) { ++ PRINTM(ERROR, "Copy from user failed\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ memset(&head, 0, sizeof(HostCmd_HEADER)); ++ /* Get the command size from user space */ ++ if (copy_from_user ++ (&head, req->ifr_data + sizeof(buf_len), sizeof(HostCmd_HEADER))) { ++ PRINTM(ERROR, "Copy from user failed\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ head.Size = uap_le16_to_cpu(head.Size); ++ if (head.Size > MRVDRV_SIZE_OF_CMD_BUFFER) { ++ PRINTM(ERROR, "CmdSize too big=%d\n", head.Size); ++ LEAVE(); ++ return -EFAULT; ++ } ++ PRINTM(CMND, "ioctl: hostcmd=%x, size=%d,buf_len=%d\n", head.Command, ++ head.Size, buf_len); ++ skb = dev_alloc_skb(head.Size + INTF_HEADER_LEN); ++ if (!skb) { ++ PRINTM(ERROR, "No free skb\n"); ++ LEAVE(); ++ return -ENOMEM; ++ } ++ ++ /* Get the command from user space */ ++ if (copy_from_user ++ (skb->data + INTF_HEADER_LEN, req->ifr_data + sizeof(buf_len), ++ head.Size)) { ++ PRINTM(ERROR, "Copy from user failed\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ skb_put(skb, head.Size + INTF_HEADER_LEN); ++ if (UAP_STATUS_SUCCESS != ++ uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP)) { ++ PRINTM(ERROR, "Fail to process cmd\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ if (!Adapter->CmdSize) { ++ PRINTM(ERROR, "Cmd Size is 0\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ if (Adapter->CmdSize > buf_len) { ++ PRINTM(ERROR, "buf_len is too small\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ /* Copy to user */ ++ if (copy_to_user ++ (req->ifr_data + sizeof(buf_len), Adapter->CmdBuf, Adapter->CmdSize)) { ++ PRINTM(ERROR, "Copy to user failed!\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief uap power mode ioctl handler ++ * ++ * @param dev A pointer to net_device structure ++ * @param req A pointer to ifreq structure ++ * @return UAP_STATUS_SUCCESS --success, otherwise fail ++ */ ++static int ++uap_power_mode_ioctl(struct net_device *dev, struct ifreq *req) ++{ ++ ps_mgmt pm_cfg; ++ int ret = UAP_STATUS_SUCCESS; ++ uap_private *priv = (uap_private *) netdev_priv(dev); ++ uap_adapter *Adapter = priv->adapter; ++ struct sk_buff *skb = NULL; ++ HostCmd_DS_COMMAND *cmd; ++ u32 CmdSize; ++ u8 *tlv = NULL; ++ MrvlIEtypes_sleep_param_t *sleep_tlv = NULL; ++ MrvlIEtypes_inact_sleep_param_t *inact_tlv = NULL; ++ u16 tlv_buf_left = 0; ++ MrvlIEtypesHeader_t *tlvbuf = NULL; ++ u16 tlv_type = 0; ++ u16 tlv_len = 0; ++ ++ ENTER(); ++ ++ /* Sanity check */ ++ if (req->ifr_data == NULL) { ++ PRINTM(ERROR, "uap_power_mode_ioctl() corrupt data\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ ++ memset(&pm_cfg, 0, sizeof(ps_mgmt)); ++ if (copy_from_user(&pm_cfg, req->ifr_data, sizeof(ps_mgmt))) { ++ PRINTM(ERROR, "Copy from user failed\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ PRINTM(CMND, ++ "ioctl power: flag=0x%x ps_mode=%d ctrl_bitmap=%d min_sleep=%d max_sleep=%d " ++ "inact_to=%d min_awake=%d max_awake=%d\n", pm_cfg.flags, ++ (int) pm_cfg.ps_mode, (int) pm_cfg.sleep_param.ctrl_bitmap, ++ (int) pm_cfg.sleep_param.min_sleep, ++ (int) pm_cfg.sleep_param.max_sleep, ++ (int) pm_cfg.inact_param.inactivity_to, ++ (int) pm_cfg.inact_param.min_awake, ++ (int) pm_cfg.inact_param.max_awake); ++ ++ if (pm_cfg. ++ flags & ~(PS_FLAG_PS_MODE | PS_FLAG_SLEEP_PARAM | ++ PS_FLAG_INACT_SLEEP_PARAM)) { ++ PRINTM(ERROR, "Invalid parameter: flags = 0x%x\n", pm_cfg.flags); ++ ret = -EINVAL; ++ goto done; ++ } ++ if (pm_cfg.ps_mode > PS_MODE_INACTIVITY) { ++ PRINTM(ERROR, "Invalid parameter: ps_mode = %d\n", (int) pm_cfg.flags); ++ ret = -EINVAL; ++ goto done; ++ } ++ ++ skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER); ++ if (!skb) { ++ PRINTM(INFO, "No free skb\n"); ++ ret = -ENOMEM; ++ goto done; ++ } ++ ++ CmdSize = S_DS_GEN + sizeof(HostCmd_DS_POWER_MGMT_EXT); ++ ++ cmd = (HostCmd_DS_COMMAND *) (skb->data + INTF_HEADER_LEN); ++ cmd->Command = uap_cpu_to_le16(HOST_CMD_POWER_MGMT_EXT); ++ if (!pm_cfg.flags) { ++ cmd->params.pm_cfg.action = uap_cpu_to_le16(ACTION_GET); ++ } else { ++ cmd->params.pm_cfg.action = uap_cpu_to_le16(ACTION_SET); ++ cmd->params.pm_cfg.power_mode = uap_cpu_to_le16(pm_cfg.ps_mode); ++ tlv = (u8 *) & cmd->params.pm_cfg + sizeof(HostCmd_DS_POWER_MGMT_EXT); ++ ++ if ((pm_cfg.ps_mode) && (pm_cfg.flags & PS_FLAG_SLEEP_PARAM)) { ++ sleep_tlv = (MrvlIEtypes_sleep_param_t *) tlv; ++ sleep_tlv->header.Type = uap_cpu_to_le16(TLV_TYPE_AP_SLEEP_PARAM); ++ sleep_tlv->header.Len = ++ uap_cpu_to_le16(sizeof(MrvlIEtypes_sleep_param_t) - ++ sizeof(MrvlIEtypesHeader_t)); ++ sleep_tlv->ctrl_bitmap = ++ uap_cpu_to_le32(pm_cfg.sleep_param.ctrl_bitmap); ++ sleep_tlv->min_sleep = ++ uap_cpu_to_le32(pm_cfg.sleep_param.min_sleep); ++ sleep_tlv->max_sleep = ++ uap_cpu_to_le32(pm_cfg.sleep_param.max_sleep); ++ CmdSize += sizeof(MrvlIEtypes_sleep_param_t); ++ tlv += sizeof(MrvlIEtypes_sleep_param_t); ++ } ++ if ((pm_cfg.ps_mode == PS_MODE_INACTIVITY) && ++ (pm_cfg.flags & PS_FLAG_INACT_SLEEP_PARAM)) { ++ inact_tlv = (MrvlIEtypes_inact_sleep_param_t *) tlv; ++ inact_tlv->header.Type = ++ uap_cpu_to_le16(TLV_TYPE_AP_INACT_SLEEP_PARAM); ++ inact_tlv->header.Len = ++ uap_cpu_to_le16(sizeof(MrvlIEtypes_inact_sleep_param_t) - ++ sizeof(MrvlIEtypesHeader_t)); ++ inact_tlv->inactivity_to = ++ uap_cpu_to_le32(pm_cfg.inact_param.inactivity_to); ++ inact_tlv->min_awake = ++ uap_cpu_to_le32(pm_cfg.inact_param.min_awake); ++ inact_tlv->max_awake = ++ uap_cpu_to_le32(pm_cfg.inact_param.max_awake); ++ CmdSize += sizeof(MrvlIEtypes_inact_sleep_param_t); ++ tlv += sizeof(MrvlIEtypes_inact_sleep_param_t); ++ } ++ } ++ cmd->Size = uap_cpu_to_le16(CmdSize); ++ skb_put(skb, CmdSize + INTF_HEADER_LEN); ++ if (UAP_STATUS_SUCCESS != ++ uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP)) { ++ PRINTM(ERROR, "Fail to process cmd POWER_MODE\n"); ++ ret = -EFAULT; ++ goto done; ++ } ++ if (!Adapter->CmdSize) { ++ PRINTM(ERROR, "Cmd Size is 0\n"); ++ ret = -EFAULT; ++ goto done; ++ } ++ cmd = (HostCmd_DS_COMMAND *) Adapter->CmdBuf; ++ cmd->Result = uap_le16_to_cpu(cmd->Result); ++ if (cmd->Result != UAP_STATUS_SUCCESS) { ++ PRINTM(ERROR, "HOST_CMD_APCMD_POWER_MODE fail=%x\n", cmd->Result); ++ ret = -EFAULT; ++ goto done; ++ } ++ if (pm_cfg.flags) { ++ Adapter->psmode = uap_le16_to_cpu(cmd->params.pm_cfg.power_mode); ++ } else { ++ pm_cfg.flags = PS_FLAG_PS_MODE; ++ pm_cfg.ps_mode = uap_le16_to_cpu(cmd->params.pm_cfg.power_mode); ++ tlv_buf_left = ++ cmd->Size - (sizeof(HostCmd_DS_POWER_MGMT_EXT) + S_DS_GEN); ++ tlvbuf = ++ (MrvlIEtypesHeader_t *) ((u8 *) & cmd->params.pm_cfg + ++ sizeof(HostCmd_DS_POWER_MGMT_EXT)); ++ while (tlv_buf_left >= sizeof(MrvlIEtypesHeader_t)) { ++ tlv_type = uap_le16_to_cpu(tlvbuf->Type); ++ tlv_len = uap_le16_to_cpu(tlvbuf->Len); ++ switch (tlv_type) { ++ case TLV_TYPE_AP_SLEEP_PARAM: ++ sleep_tlv = (MrvlIEtypes_sleep_param_t *) tlvbuf; ++ pm_cfg.flags |= PS_FLAG_SLEEP_PARAM; ++ pm_cfg.sleep_param.ctrl_bitmap = ++ uap_le32_to_cpu(sleep_tlv->ctrl_bitmap); ++ pm_cfg.sleep_param.min_sleep = ++ uap_le32_to_cpu(sleep_tlv->min_sleep); ++ pm_cfg.sleep_param.max_sleep = ++ uap_le32_to_cpu(sleep_tlv->max_sleep); ++ break; ++ case TLV_TYPE_AP_INACT_SLEEP_PARAM: ++ inact_tlv = (MrvlIEtypes_inact_sleep_param_t *) tlvbuf; ++ pm_cfg.flags |= PS_FLAG_INACT_SLEEP_PARAM; ++ pm_cfg.inact_param.inactivity_to = ++ uap_le32_to_cpu(inact_tlv->inactivity_to); ++ pm_cfg.inact_param.min_awake = ++ uap_le32_to_cpu(inact_tlv->min_awake); ++ pm_cfg.inact_param.max_awake = ++ uap_le32_to_cpu(inact_tlv->max_awake); ++ break; ++ } ++ tlv_buf_left -= tlv_len + sizeof(MrvlIEtypesHeader_t); ++ tlvbuf = ++ (MrvlIEtypesHeader_t *) ((u8 *) tlvbuf + tlv_len + ++ sizeof(MrvlIEtypesHeader_t)); ++ } ++ /* Copy to user */ ++ if (copy_to_user(req->ifr_data, &pm_cfg, sizeof(ps_mgmt))) { ++ PRINTM(ERROR, "Copy to user failed!\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ } ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function send bss_stop command to firmware ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS on success, otherwise failure code ++ */ ++static int ++uap_bss_stop(uap_private * priv) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ u32 CmdSize; ++ HostCmd_DS_GEN *cmd; ++ uap_adapter *Adapter = priv->adapter; ++ struct sk_buff *skb; ++ ENTER(); ++ if (Adapter->HardwareStatus != HWReady) { ++ PRINTM(ERROR, "uap_bss_stop:Hardware is not ready!\n"); ++ ret = -EFAULT; ++ goto done; ++ } ++ skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER); ++ if (!skb) { ++ PRINTM(ERROR, "No free skb\n"); ++ ret = -ENOMEM; ++ goto done; ++ } ++ CmdSize = sizeof(HostCmd_DS_GEN); ++ cmd = (HostCmd_DS_GEN *) (skb->data + INTF_HEADER_LEN); ++ cmd->Command = uap_cpu_to_le16(HOST_CMD_APCMD_BSS_STOP); ++ cmd->Size = uap_cpu_to_le16(CmdSize); ++ skb_put(skb, CmdSize + INTF_HEADER_LEN); ++ PRINTM(CMND, "APCMD_BSS_STOP\n"); ++ if (UAP_STATUS_SUCCESS != ++ uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP_TIMEOUT)) { ++ PRINTM(ERROR, "Fail to process cmd BSS_STOP\n"); ++ ret = -EFAULT; ++ goto done; ++ } ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/******************************************************** ++ Global Functions ++********************************************************/ ++/** ++ * @brief This function send soft_reset command to firmware ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS on success, otherwise failure code ++ */ ++int ++uap_soft_reset(uap_private * priv) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ u32 CmdSize; ++ HostCmd_DS_GEN *cmd; ++ uap_adapter *Adapter = priv->adapter; ++ struct sk_buff *skb; ++ ENTER(); ++ ret = uap_bss_stop(priv); ++ if (ret != UAP_STATUS_SUCCESS) ++ goto done; ++ skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER); ++ if (!skb) { ++ PRINTM(ERROR, "No free skb\n"); ++ ret = -ENOMEM; ++ goto done; ++ } ++ CmdSize = sizeof(HostCmd_DS_GEN); ++ cmd = (HostCmd_DS_GEN *) (skb->data + INTF_HEADER_LEN); ++ cmd->Command = uap_cpu_to_le16(HOST_CMD_APCMD_SOFT_RESET); ++ cmd->Size = uap_cpu_to_le16(CmdSize); ++ skb_put(skb, CmdSize + INTF_HEADER_LEN); ++ PRINTM(CMND, "APCMD_SOFT_RESET\n"); ++ if (UAP_STATUS_SUCCESS != ++ uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORSEND)) { ++ PRINTM(ERROR, "Fail to process cmd SOFT_RESET\n"); ++ ret = -EFAULT; ++ goto done; ++ } ++ Adapter->SurpriseRemoved = TRUE; ++ /* delay to allow hardware complete reset */ ++ os_sched_timeout(5); ++ if (priv->MediaConnected == TRUE) { ++ os_stop_queue(priv); ++ os_carrier_off(priv); ++ priv->MediaConnected = FALSE; ++ } ++ Adapter->CmdSize = 0; ++ Adapter->CmdWaitQWoken = TRUE; ++ wake_up_interruptible(&Adapter->cmdwait_q); ++ skb_queue_purge(&priv->adapter->tx_queue); ++ skb_queue_purge(&priv->adapter->cmd_queue); ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function processes received packet and forwards it ++ * to kernel/upper layer ++ * ++ * @param priv A pointer to uap_private ++ * @param skb A pointer to skb which includes the received packet ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int ++uap_process_rx_packet(uap_private * priv, struct sk_buff *skb) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ RxPD *pRxPD; ++ ENTER(); ++ priv->adapter->ps_state = PS_STATE_AWAKE; ++ pRxPD = (RxPD *) skb->data; ++ endian_convert_RxPD(pRxPD); ++ DBG_HEXDUMP(DAT_D, "Rx", skb->data, MIN(skb->len, DATA_DUMP_LEN)); ++ skb_pull(skb, pRxPD->RxPktOffset); ++ priv->stats.rx_packets++; ++ priv->stats.rx_bytes += skb->len; ++ os_upload_rx_packet(priv, skb); ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function opens the network device ++ * ++ * @param dev A pointer to net_device structure ++ * @return UAP_STATUS_SUCCESS ++ */ ++static int ++uap_open(struct net_device *dev) ++{ ++ uap_private *priv = (uap_private *) (uap_private *) netdev_priv(dev); ++ uap_adapter *Adapter = priv->adapter; ++ int i = 0; ++ ++ ENTER(); ++ ++ /* On some systems the device open handler will be called before HW ready. */ ++ /* Use the following flag check and wait function to work around the issue. */ ++ while ((Adapter->HardwareStatus != HWReady) && ++ (i < MAX_WAIT_DEVICE_READY_COUNT)) { ++ i++; ++ os_sched_timeout(100); ++ } ++ if (i >= MAX_WAIT_DEVICE_READY_COUNT) { ++ PRINTM(FATAL, "HW not ready, uap_open() return failure\n"); ++ LEAVE(); ++ return UAP_STATUS_FAILURE; ++ } ++ ++ if (MODULE_GET == 0) ++ return UAP_STATUS_FAILURE; ++ ++ priv->open = TRUE; ++ if (priv->MediaConnected == TRUE) { ++ os_carrier_on(priv); ++ os_start_queue(priv); ++ } else { ++ os_stop_queue(priv); ++ os_carrier_off(priv); ++ } ++ LEAVE(); ++ return UAP_STATUS_SUCCESS; ++} ++ ++/** ++ * @brief This function closes the network device ++ * ++ * @param dev A pointer to net_device structure ++ * @return UAP_STATUS_SUCCESS ++ */ ++static int ++uap_close(struct net_device *dev) ++{ ++ uap_private *priv = (uap_private *) netdev_priv(dev); ++ ++ ENTER(); ++ skb_queue_purge(&priv->adapter->tx_queue); ++ os_stop_queue(priv); ++ os_carrier_off(priv); ++ ++ MODULE_PUT; ++ priv->open = FALSE; ++ LEAVE(); ++ return UAP_STATUS_SUCCESS; ++} ++ ++/** ++ * @brief This function returns the network statistics ++ * ++ * @param dev A pointer to uap_private structure ++ * @return A pointer to net_device_stats structure ++ */ ++static struct net_device_stats * ++uap_get_stats(struct net_device *dev) ++{ ++ uap_private *priv = (uap_private *) netdev_priv(dev); ++ ++ return &priv->stats; ++} ++ ++/** ++ * @brief This function sets the MAC address to firmware. ++ * ++ * @param dev A pointer to uap_private structure ++ * @param addr MAC address to set ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++uap_set_mac_address(struct net_device *dev, void *addr) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ uap_private *priv = (uap_private *) netdev_priv(dev); ++ struct sockaddr *pHwAddr = (struct sockaddr *) addr; ++ u32 CmdSize; ++ HostCmd_DS_COMMAND *cmd; ++ MrvlIEtypes_MacAddr_t *pMacAddrTlv; ++ uap_adapter *Adapter = priv->adapter; ++ struct sk_buff *skb; ++ ++ ENTER(); ++ ++ /* Dump MAC address */ ++ DBG_HEXDUMP(CMD_D, "Original MAC addr", dev->dev_addr, ETH_ALEN); ++ DBG_HEXDUMP(CMD_D, "New MAC addr", pHwAddr->sa_data, ETH_ALEN); ++ if (priv->open && (priv->MediaConnected == TRUE)) { ++ os_carrier_on(priv); ++ os_start_queue(priv); ++ } ++ skb = dev_alloc_skb(MRVDRV_SIZE_OF_CMD_BUFFER); ++ if (!skb) { ++ PRINTM(ERROR, "No free skb\n"); ++ LEAVE(); ++ return -ENOMEM; ++ } ++ CmdSize = ++ S_DS_GEN + sizeof(HostCmd_SYS_CONFIG) + sizeof(MrvlIEtypes_MacAddr_t); ++ cmd = (HostCmd_DS_COMMAND *) (skb->data + INTF_HEADER_LEN); ++ cmd->Command = uap_cpu_to_le16(HOST_CMD_APCMD_SYS_CONFIGURE); ++ cmd->Size = uap_cpu_to_le16(CmdSize); ++ cmd->params.sys_config.Action = uap_cpu_to_le16(ACTION_SET); ++ pMacAddrTlv = ++ (MrvlIEtypes_MacAddr_t *) ((u8 *) cmd + S_DS_GEN + ++ sizeof(HostCmd_SYS_CONFIG)); ++ pMacAddrTlv->Header.Type = uap_cpu_to_le16(MRVL_AP_MAC_ADDRESS_TLV_ID); ++ pMacAddrTlv->Header.Len = uap_cpu_to_le16(ETH_ALEN); ++ memcpy(pMacAddrTlv->ApMacAddr, pHwAddr->sa_data, ETH_ALEN); ++ skb_put(skb, CmdSize + INTF_HEADER_LEN); ++ PRINTM(CMND, "set_mac_address\n"); ++ if (UAP_STATUS_SUCCESS != ++ uap_process_cmd(priv, skb, HostCmd_OPTION_WAITFORRSP_TIMEOUT)) { ++ PRINTM(ERROR, "Fail to set mac address\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ if (!Adapter->CmdSize) { ++ PRINTM(ERROR, "Cmd Size is 0\n"); ++ LEAVE(); ++ return -EFAULT; ++ } ++ cmd = (HostCmd_DS_COMMAND *) Adapter->CmdBuf; ++ cmd->Result = uap_cpu_to_le16(cmd->Result); ++ if (cmd->Result != UAP_STATUS_SUCCESS) { ++ PRINTM(ERROR, "set mac addrress fail,cmd result=%x\n", cmd->Result); ++ ret = -EFAULT; ++ } else ++ memcpy(dev->dev_addr, pHwAddr->sa_data, ETH_ALEN); ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function sets multicast addresses to firmware ++ * ++ * @param dev A pointer to net_device structure ++ * @return n/a ++ */ ++static void ++uap_set_multicast_list(struct net_device *dev) ++{ ++ ENTER(); ++#warning uap_set_multicast_list not implemented. Expect problems with IPv6. ++ LEAVE(); ++} ++ ++/** ++ * @brief This function handles the timeout of packet ++ * transmission ++ * ++ * @param dev A pointer to net_device structure ++ * @return n/a ++ */ ++static void ++uap_tx_timeout(struct net_device *dev) ++{ ++ uap_private *priv = (uap_private *) netdev_priv(dev); ++ ++ ENTER(); ++ ++ PRINTM(DATA, "Tx timeout\n"); ++ UpdateTransStart(dev); ++ priv->num_tx_timeout++; ++ priv->adapter->IntCounter++; ++ wake_up_interruptible(&priv->MainThread.waitQ); ++ ++ LEAVE(); ++} ++ ++/** ++ * @brief This function handles packet transmission ++ * ++ * @param skb A pointer to sk_buff structure ++ * @param dev A pointer to net_device structure ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++uap_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ uap_private *priv = (uap_private *) netdev_priv(dev); ++ int ret = UAP_STATUS_SUCCESS; ++ ++ ENTER(); ++ PRINTM(DATA, "Data <= kernel\n"); ++ DBG_HEXDUMP(DAT_D, "Tx", skb->data, MIN(skb->len, DATA_DUMP_LEN)); ++ /* skb sanity check */ ++ if (!skb->len || (skb->len > MRVDRV_MAXIMUM_ETH_PACKET_SIZE)) { ++ PRINTM(ERROR, "Tx Error: Bad skb length %d : %d\n", skb->len, ++ MRVDRV_MAXIMUM_ETH_PACKET_SIZE); ++ priv->stats.tx_dropped++; ++ kfree(skb); ++ goto done; ++ } ++ skb_queue_tail(&priv->adapter->tx_queue, skb); ++ wake_up_interruptible(&priv->MainThread.waitQ); ++ if (skb_queue_len(&priv->adapter->tx_queue) > TX_HIGH_WATERMARK) { ++ UpdateTransStart(dev); ++ os_stop_queue(priv); ++ } ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief ioctl function - entry point ++ * ++ * @param dev A pointer to net_device structure ++ * @param req A pointer to ifreq structure ++ * @param cmd command ++ * @return UAP_STATUS_SUCCESS--success, otherwise fail ++ */ ++static int ++uap_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ ++ ENTER(); ++ ++ PRINTM(CMND, "uap_do_ioctl: ioctl cmd = 0x%x\n", cmd); ++ ++ switch (cmd) { ++ case UAPHOSTCMD: ++ ret = uap_hostcmd_ioctl(dev, req); ++ break; ++ case UAP_POWER_MODE: ++ ret = uap_power_mode_ioctl(dev, req); ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function handles events generated by firmware ++ * ++ * @param priv A pointer to uap_private structure ++ * @param payload A pointer to payload buffer ++ * @param len Length of the payload ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int ++uap_process_event(uap_private * priv, u8 * payload, uint len) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ uap_adapter *Adapter = priv->adapter; ++ struct sk_buff *skb = NULL; ++ struct nlmsghdr *nlh = NULL; ++ struct sock *sk = Adapter->nl_sk; ++ AP_Event *pEvent; ++ ++ ENTER(); ++ Adapter->ps_state = PS_STATE_AWAKE; ++ if (len > NL_MAX_PAYLOAD) { ++ PRINTM(ERROR, "event size is too big!!! len=%d\n", len); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ pEvent = (AP_Event *) payload; ++ PRINTM(CMND, "Event: %d\n", pEvent->EventId); ++ switch (pEvent->EventId) { ++ case MICRO_AP_EV_ID_BSS_START: ++ memcpy(priv->uap_dev.netdev->dev_addr, pEvent->MacAddr, ETH_ALEN); ++ DBG_HEXDUMP(CMD_D, "BSS MAC addr", priv->uap_dev.netdev->dev_addr, ++ ETH_ALEN); ++ break; ++ case MICRO_AP_EV_BSS_ACTIVE: ++ // carrier on ++ priv->MediaConnected = TRUE; ++ os_carrier_on(priv); ++ os_start_queue(priv); ++ break; ++ case MICRO_AP_EV_BSS_IDLE: ++ os_stop_queue(priv); ++ os_carrier_off(priv); ++ priv->MediaConnected = FALSE; ++ break; ++ case EVENT_PS_AWAKE: ++ PRINTM(CMND, "UAP: PS_AWAKE\n"); ++ Adapter->ps_state = PS_STATE_AWAKE; ++ Adapter->WakeupTries = 0; ++ break; ++ case EVENT_PS_SLEEP: ++ PRINTM(CMND, "UAP: PS_SLEEP\n"); ++ Adapter->ps_state = PS_STATE_PRE_SLEEP; ++ break; ++ default: ++ break; ++ } ++ if ((pEvent->EventId == EVENT_PS_AWAKE) || ++ (pEvent->EventId == EVENT_PS_SLEEP)) ++ goto done; ++ if (sk) { ++ /* Allocate skb */ ++ if (!(skb = alloc_skb(NLMSG_SPACE(NL_MAX_PAYLOAD), GFP_ATOMIC))) { ++ PRINTM(ERROR, "Could not allocate skb for netlink.\n"); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ nlh = (struct nlmsghdr *) skb->data; ++ nlh->nlmsg_len = NLMSG_SPACE(len); ++ ++ /* From kernel */ ++ nlh->nlmsg_pid = 0; ++ nlh->nlmsg_flags = 0; ++ ++ /* Data */ ++ skb_put(skb, nlh->nlmsg_len); ++ memcpy(NLMSG_DATA(nlh), payload, len); ++ ++ /* From Kernel */ ++ NETLINK_CB(skb).pid = 0; ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ /* Multicast message */ ++ NETLINK_CB(skb).dst_pid = 0; ++#endif ++ ++ /* Multicast group number */ ++ NETLINK_CB(skb).dst_group = NL_MULTICAST_GROUP; ++ ++ /* Send message */ ++ netlink_broadcast(sk, skb, 0, NL_MULTICAST_GROUP, GFP_KERNEL); ++ ++ ret = UAP_STATUS_SUCCESS; ++ } else { ++ PRINTM(ERROR, "Could not send event through NETLINK. Link down.\n"); ++ ret = UAP_STATUS_FAILURE; ++ } ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function handles the interrupt. it will change PS ++ * state if applicable. it will wake up main_thread to handle ++ * the interrupt event as well. ++ * ++ * @param priv A pointer to uap_private structure ++ * @return n/a ++ */ ++void ++uap_interrupt(uap_private * priv) ++{ ++ ENTER(); ++ priv->adapter->IntCounter++; ++ priv->adapter->WakeupTries = 0; ++ PRINTM(INFO, "*\n"); ++ wake_up_interruptible(&priv->MainThread.waitQ); ++ ++ LEAVE(); ++ ++} ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29) ++/** Network device handlers */ ++static const struct net_device_ops uap_netdev_ops = { ++ .ndo_open = uap_open, ++ .ndo_start_xmit = uap_hard_start_xmit, ++ .ndo_stop = uap_close, ++ .ndo_do_ioctl = uap_do_ioctl, ++ .ndo_set_mac_address = uap_set_mac_address, ++ .ndo_tx_timeout = uap_tx_timeout, ++ .ndo_get_stats = uap_get_stats, ++ .ndo_set_multicast_list = uap_set_multicast_list, ++}; ++#endif ++ ++/** ++ * @brief This function adds the card. it will probe the ++ * card, allocate the uap_priv and initialize the device. ++ * ++ * @param card A pointer to card ++ * @return A pointer to uap_private structure ++ */ ++uap_private * ++uap_add_card(void *card) ++{ ++ struct net_device *dev = NULL; ++ uap_private *priv = NULL; ++ ++ ENTER(); ++ ++ if (OS_ACQ_SEMAPHORE_BLOCK(&AddRemoveCardSem)) ++ goto exit_sem_err; ++ ++ /* Allocate an Ethernet device */ ++ if (!(dev = alloc_etherdev(sizeof(uap_private)))) { ++ PRINTM(FATAL, "Init ethernet device failed!\n"); ++ goto error; ++ } ++ priv = (uap_private *) netdev_priv(dev); ++ ++ /* Allocate name */ ++ if (dev_alloc_name(dev, "uap%d") < 0) { ++ PRINTM(ERROR, "Could not allocate device name!\n"); ++ goto error; ++ } ++ ++ /* Allocate buffer for uap_adapter */ ++ if (!(priv->adapter = kmalloc(sizeof(uap_adapter), GFP_KERNEL))) { ++ PRINTM(FATAL, "Allocate buffer for uap_adapter failed!\n"); ++ goto error; ++ } ++ memset(priv->adapter, 0, sizeof(uap_adapter)); ++ ++ priv->uap_dev.netdev = dev; ++ priv->uap_dev.card = card; ++ priv->MediaConnected = FALSE; ++ uappriv = priv; ++ ((struct sdio_mmc_card *) card)->priv = priv; ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ++ SET_MODULE_OWNER(dev); ++#endif ++ ++ /* Setup the OS Interface to our functions */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29) ++ dev->open = uap_open; ++ dev->stop = uap_close; ++ dev->hard_start_xmit = uap_hard_start_xmit; ++ dev->tx_timeout = uap_tx_timeout; ++ dev->get_stats = uap_get_stats; ++ dev->do_ioctl = uap_do_ioctl; ++ dev->set_mac_address = uap_set_mac_address; ++ dev->set_multicast_list = uap_set_multicast_list; ++#else ++ dev->netdev_ops = &uap_netdev_ops; ++#endif ++ dev->watchdog_timeo = MRVDRV_DEFAULT_WATCHDOG_TIMEOUT; ++ dev->hard_header_len += sizeof(TxPD) + INTF_HEADER_LEN; ++ dev->hard_header_len += HEADER_ALIGNMENT; ++#define NETIF_F_DYNALLOC 16 ++ dev->features |= NETIF_F_DYNALLOC; ++ dev->flags |= IFF_BROADCAST | IFF_MULTICAST; ++ ++ /* Init SW */ ++ if (uap_init_sw(priv)) { ++ PRINTM(FATAL, "Software Init Failed\n"); ++ goto error; ++ } ++ ++ PRINTM(INFO, "Starting kthread...\n"); ++ priv->MainThread.priv = priv; ++ spin_lock_init(&priv->driver_lock); ++ uap_create_thread(uap_service_main_thread, &priv->MainThread, ++ "uap_main_service"); ++ while (priv->MainThread.pid == 0) { ++ os_sched_timeout(2); ++ } ++ ++ /* Register the device */ ++ if (sbi_register_dev(priv) < 0) { ++ PRINTM(FATAL, "Failed to register uap device!\n"); ++ goto err_registerdev; ++ } ++#ifdef FW_DNLD_NEEDED ++ SET_NETDEV_DEV(dev, priv->hotplug_device); ++#endif ++ ++ /* Init FW and HW */ ++ if (uap_init_fw(priv)) { ++ PRINTM(FATAL, "Firmware Init Failed\n"); ++ goto err_init_fw; ++ } ++ ++ priv->uap_dev.cmd_sent = FALSE; ++ priv->uap_dev.data_sent = FALSE; ++ ++ /* Get mac address from firmware */ ++ if (uap_get_mac_address(priv)) { ++ PRINTM(FATAL, "Fail to get mac address\n"); ++ goto err_init_fw; ++ } ++ /* Register network device */ ++ if (register_netdev(dev)) { ++ printk(KERN_ERR "Cannot register network device!\n"); ++ goto err_init_fw; ++ } ++#ifdef CONFIG_PROC_FS ++ uap_proc_entry(priv, dev); ++ uap_debug_entry(priv, dev); ++#endif /* CPNFIG_PROC_FS */ ++ OS_REL_SEMAPHORE(&AddRemoveCardSem); ++ ++ LEAVE(); ++ return priv; ++ err_init_fw: ++ sbi_unregister_dev(priv); ++ err_registerdev: ++ ((struct sdio_mmc_card *) card)->priv = NULL; ++ /* Stop the thread servicing the interrupts */ ++ priv->adapter->SurpriseRemoved = TRUE; ++ wake_up_interruptible(&priv->MainThread.waitQ); ++ while (priv->MainThread.pid) { ++ os_sched_timeout(1); ++ } ++ error: ++ if (dev) { ++ if (dev->reg_state == NETREG_REGISTERED) ++ unregister_netdev(dev); ++ if (priv->adapter) ++ uap_free_adapter(priv); ++ free_netdev(dev); ++ uappriv = NULL; ++ } ++ OS_REL_SEMAPHORE(&AddRemoveCardSem); ++ exit_sem_err: ++ LEAVE(); ++ return NULL; ++} ++ ++/** ++ * @brief This function removes the card. ++ * ++ * @param card A pointer to card ++ * @return UAP_STATUS_SUCCESS ++ */ ++int ++uap_remove_card(void *card) ++{ ++ uap_private *priv = uappriv; ++ uap_adapter *Adapter; ++ struct net_device *dev; ++ ++ ENTER(); ++ ++ if (OS_ACQ_SEMAPHORE_BLOCK(&AddRemoveCardSem)) ++ goto exit_sem_err; ++ ++ if (!priv || !(Adapter = priv->adapter)) { ++ goto exit_remove; ++ } ++ Adapter->SurpriseRemoved = TRUE; ++ if (Adapter->cmd_pending == TRUE) { ++ /* Wake up cmd Q */ ++ Adapter->CmdWaitQWoken = TRUE; ++ wake_up_interruptible(&Adapter->cmdwait_q); ++ } ++ dev = priv->uap_dev.netdev; ++ if (priv->MediaConnected == TRUE) { ++ os_stop_queue(priv); ++ os_carrier_off(priv); ++ priv->MediaConnected = FALSE; ++ } ++ Adapter->CmdSize = 0; ++ Adapter->CmdWaitQWoken = TRUE; ++ wake_up_interruptible(&Adapter->cmdwait_q); ++ skb_queue_purge(&priv->adapter->tx_queue); ++ skb_queue_purge(&priv->adapter->cmd_queue); ++ ++ /* Disable interrupts on the card */ ++ sbi_disable_host_int(priv); ++ PRINTM(INFO, "netdev_finish_unregister: %s%s.\n", dev->name, ++ (dev->features & NETIF_F_DYNALLOC) ? "" : ", old style"); ++ unregister_netdev(dev); ++ PRINTM(INFO, "Unregister finish\n"); ++ wake_up_interruptible(&priv->MainThread.waitQ); ++ while (priv->MainThread.pid) { ++ os_sched_timeout(1); ++ } ++ ++ if ((Adapter->nl_sk) && ((Adapter->nl_sk)->sk_socket)) { ++ sock_release((Adapter->nl_sk)->sk_socket); ++ Adapter->nl_sk = NULL; ++ } ++#ifdef CONFIG_PROC_FS ++ uap_debug_remove(priv); ++ uap_proc_remove(priv); ++#endif ++ sbi_unregister_dev(priv); ++ PRINTM(INFO, "Free Adapter\n"); ++ uap_free_adapter(priv); ++ priv->uap_dev.netdev = NULL; ++ free_netdev(dev); ++ uappriv = NULL; ++ ++ exit_remove: ++ OS_REL_SEMAPHORE(&AddRemoveCardSem); ++ exit_sem_err: ++ LEAVE(); ++ return UAP_STATUS_SUCCESS; ++} ++ ++/** ++ * @brief This function initializes module. ++ * ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int __init ++uap_init_module(void) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ ENTER(); ++ ++ OS_INIT_SEMAPHORE(&AddRemoveCardSem); ++ ret = sbi_register(); ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function cleans module ++ * ++ * @return n/a ++ */ ++static void __exit ++uap_cleanup_module(void) ++{ ++ ENTER(); ++ ++ if (OS_ACQ_SEMAPHORE_BLOCK(&AddRemoveCardSem)) ++ goto exit_sem_err; ++ ++ if ((uappriv) && (uappriv->adapter)) { ++ uap_func_shutdown(uappriv); ++ } ++ OS_REL_SEMAPHORE(&AddRemoveCardSem); ++ exit_sem_err: ++ sbi_unregister(); ++ LEAVE(); ++} ++ ++module_init(uap_init_module); ++module_exit(uap_cleanup_module); ++module_param(helper_name, charp, 0); ++MODULE_PARM_DESC(helper_name, "Helper name"); ++module_param(fw_name, charp, 0); ++MODULE_PARM_DESC(fw_name, "Firmware name"); ++ ++MODULE_DESCRIPTION("M-UAP Driver"); ++MODULE_AUTHOR("Marvell International Ltd."); ++MODULE_VERSION(DRIVER_VERSION); ++MODULE_LICENSE("GPL"); +diff -Naupr linux-2.6.37/drivers/net/wireless/libertas_uap/uap_proc.c linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_proc.c +--- linux-2.6.37/drivers/net/wireless/libertas_uap/uap_proc.c 1969-12-31 17:00:00.000000000 -0700 ++++ linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_proc.c 2011-01-08 06:01:04.050835055 -0700 +@@ -0,0 +1,296 @@ ++/** @file uap_proc.c ++ * @brief This file contains functions for proc file. ++ * ++ * Copyright (C) 2008-2009, Marvell International Ltd. ++ * ++ * This software file (the "File") is distributed by Marvell International ++ * Ltd. under the terms of the GNU General Public License Version 2, June 1991 ++ * (the "License"). You may use, redistribute and/or modify this File in ++ * accordance with the terms and conditions of the License, a copy of which ++ * is available along with the File in the gpl.txt file or by writing to ++ * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA ++ * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt. ++ * ++ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ++ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about ++ * this warranty disclaimer. ++ * ++ */ ++#ifdef CONFIG_PROC_FS ++#include "uap_headers.h" ++ ++/** /proc directory root */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) ++#define PROC_DIR NULL ++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) ++#define PROC_DIR &proc_root ++#else ++#define PROC_DIR proc_net ++#endif ++ ++/******************************************************** ++ Local Variables ++********************************************************/ ++ ++/******************************************************** ++ Global Variables ++********************************************************/ ++ ++/******************************************************** ++ Local Functions ++********************************************************/ ++ ++/** ++ * @brief proc read function ++ * ++ * @param page pointer to buffer ++ * @param start read data starting position ++ * @param offset offset ++ * @param count counter ++ * @param eof end of file flag ++ * @param data data to output ++ * @return number of output data ++ */ ++static int ++uap_proc_read(char *page, char **start, off_t offset, ++ int count, int *eof, void *data) ++{ ++ int i; ++ char *p = page; ++ struct net_device *netdev = data; ++ struct netdev_hw_addr *ha; ++ char fmt[64]; ++ uap_private *priv = (uap_private *) netdev_priv(netdev); ++ ++ if (offset != 0) { ++ *eof = 1; ++ goto exit; ++ } ++ ++ strcpy(fmt, DRIVER_VERSION); ++ ++ p += sprintf(p, "driver_name = " "\"uap\"\n"); ++ p += sprintf(p, "driver_version = %s-(FP%s)", fmt, FPNUM); ++ p += sprintf(p, "\nInterfaceName=\"%s\"\n", netdev->name); ++ p += sprintf(p, "State=\"%s\"\n", ++ ((priv->MediaConnected == ++ FALSE) ? "Disconnected" : "Connected")); ++ p += sprintf(p, "MACAddress=\"%02x:%02x:%02x:%02x:%02x:%02x\"\n", ++ netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2], ++ netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]); ++ i = 0; ++ netdev_for_each_mc_addr(ha, netdev) { ++ ++i; ++ } ++ p += sprintf(p, "MCCount=\"%d\"\n", i); ++ ++ /* ++ * Put out the multicast list ++ */ ++ i = 0; ++ netdev_for_each_mc_addr(ha, netdev) { ++ p += sprintf(p, ++ "MCAddr[%d]=\"%02x:%02x:%02x:%02x:%02x:%02x\"\n", ++ i++, ++ ha->addr[0], ha->addr[1], ++ ha->addr[2], ha->addr[3], ++ ha->addr[4], ha->addr[5]); ++ } ++ ++ p += sprintf(p, "num_tx_bytes = %lu\n", priv->stats.tx_bytes); ++ p += sprintf(p, "num_rx_bytes = %lu\n", priv->stats.rx_bytes); ++ p += sprintf(p, "num_tx_pkts = %lu\n", priv->stats.tx_packets); ++ p += sprintf(p, "num_rx_pkts = %lu\n", priv->stats.rx_packets); ++ p += sprintf(p, "num_tx_pkts_dropped = %lu\n", priv->stats.tx_dropped); ++ p += sprintf(p, "num_rx_pkts_dropped = %lu\n", priv->stats.rx_dropped); ++ p += sprintf(p, "num_tx_pkts_err = %lu\n", priv->stats.tx_errors); ++ p += sprintf(p, "num_rx_pkts_err = %lu\n", priv->stats.rx_errors); ++ p += sprintf(p, "num_tx_timeout = %u\n", priv->num_tx_timeout); ++ p += sprintf(p, "carrier %s\n", ++ ((netif_carrier_ok(priv->uap_dev.netdev)) ? "on" : "off")); ++ p += sprintf(p, "tx queue %s\n", ++ ((netif_queue_stopped(priv->uap_dev.netdev)) ? "stopped" : ++ "started")); ++ ++ exit: ++ return (p - page); ++} ++ ++/** ++ * @brief hwstatus proc write function ++ * ++ * @param f file pointer ++ * @param buf pointer to data buffer ++ * @param cnt data number to write ++ * @param data data to write ++ * @return number of data ++ */ ++static int ++uap_hwstatus_write(struct file *f, const char *buf, unsigned long cnt, ++ void *data) ++{ ++ struct net_device *netdev = data; ++ uap_private *priv = (uap_private *) netdev_priv(netdev); ++ char databuf[10]; ++ int hwstatus; ++ MODULE_GET; ++ if (cnt > 10) { ++ MODULE_PUT; ++ return cnt; ++ } ++ if (copy_from_user(databuf, buf, cnt)) { ++ MODULE_PUT; ++ return 0; ++ } ++ hwstatus = string_to_number(databuf); ++ switch (hwstatus) { ++ case HWReset: ++ PRINTM(MSG, "reset hw\n"); ++ uap_soft_reset(priv); ++ priv->adapter->HardwareStatus = HWReset; ++ break; ++ default: ++ break; ++ } ++ MODULE_PUT; ++ return cnt; ++} ++ ++/** ++ * @brief hwstatus proc read function ++ * ++ * @param page pointer to buffer ++ * @param s read data starting position ++ * @param off offset ++ * @param cnt counter ++ * @param eof end of file flag ++ * @param data data to output ++ * @return number of output data ++ */ ++static int ++uap_hwstatus_read(char *page, char **s, off_t off, int cnt, int *eof, ++ void *data) ++{ ++ char *p = page; ++ struct net_device *netdev = data; ++ uap_private *priv = (uap_private *) netdev_priv(netdev); ++ MODULE_GET; ++ p += sprintf(p, "%d\n", priv->adapter->HardwareStatus); ++ MODULE_PUT; ++ return p - page; ++} ++ ++/******************************************************** ++ Global Functions ++********************************************************/ ++/** ++ * @brief create uap proc file ++ * ++ * @param priv pointer uap_private ++ * @param dev pointer net_device ++ * @return N/A ++ */ ++void ++uap_proc_entry(uap_private * priv, struct net_device *dev) ++{ ++ struct proc_dir_entry *r = PROC_DIR; ++ ++ PRINTM(INFO, "Creating Proc Interface\n"); ++ /* Check if uap directory already exists */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) ++ for (r = r->subdir; r; r = r->next) { ++ if (r->namelen && !strcmp("uap", r->name)) { ++ /* Directory exists */ ++ PRINTM(WARN, "proc directory already exists!\n"); ++ priv->proc_uap = r; ++ break; ++ } ++ } ++#endif ++ if (!priv->proc_uap) { ++ priv->proc_uap = proc_mkdir("uap", PROC_DIR); ++ if (!priv->proc_uap) ++ return; ++ else ++ atomic_set(&priv->proc_uap->count, 1); ++ } else { ++ atomic_inc(&priv->proc_uap->count); ++ } ++ priv->proc_entry = proc_mkdir(dev->name, priv->proc_uap); ++ ++ if (priv->proc_entry) { ++ r = create_proc_read_entry("info", 0, priv->proc_entry, uap_proc_read, ++ dev); ++ r = create_proc_entry("hwstatus", 0644, priv->proc_entry); ++ if (r) { ++ r->data = dev; ++ r->read_proc = uap_hwstatus_read; ++ r->write_proc = uap_hwstatus_write; ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++ r->owner = THIS_MODULE; ++#endif ++ } else ++ PRINTM(MSG, "Fail to create proc hwstatus\n"); ++ } ++} ++ ++/** ++ * @brief remove proc file ++ * ++ * @param priv pointer uap_private ++ * @return N/A ++ */ ++void ++uap_proc_remove(uap_private * priv) ++{ ++ if (priv->proc_uap) { ++ if (priv->proc_entry) { ++ remove_proc_entry("info", priv->proc_entry); ++ remove_proc_entry("hwstatus", priv->proc_entry); ++ } ++ remove_proc_entry(priv->uap_dev.netdev->name, priv->proc_uap); ++ atomic_dec(&priv->proc_uap->count); ++ if (atomic_read(&(priv->proc_uap->count)) == 0) ++ remove_proc_entry("uap", PROC_DIR); ++ } ++} ++ ++/** ++ * @brief convert string to number ++ * ++ * @param s pointer to numbered string ++ * @return converted number from string s ++ */ ++int ++string_to_number(char *s) ++{ ++ int r = 0; ++ int base = 0; ++ int pn = 1; ++ ++ if (strncmp(s, "-", 1) == 0) { ++ pn = -1; ++ s++; ++ } ++ if ((strncmp(s, "0x", 2) == 0) || (strncmp(s, "0X", 2) == 0)) { ++ base = 16; ++ s += 2; ++ } else ++ base = 10; ++ ++ for (s = s; *s != 0; s++) { ++ if ((*s >= '0') && (*s <= '9')) ++ r = (r * base) + (*s - '0'); ++ else if ((*s >= 'A') && (*s <= 'F')) ++ r = (r * base) + (*s - 'A' + 10); ++ else if ((*s >= 'a') && (*s <= 'f')) ++ r = (r * base) + (*s - 'a' + 10); ++ else ++ break; ++ } ++ ++ return (r * pn); ++} ++ ++#endif +diff -Naupr linux-2.6.37/drivers/net/wireless/libertas_uap/uap_sdio_mmc.c linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_sdio_mmc.c +--- linux-2.6.37/drivers/net/wireless/libertas_uap/uap_sdio_mmc.c 1969-12-31 17:00:00.000000000 -0700 ++++ linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_sdio_mmc.c 2011-01-08 06:01:04.055834709 -0700 +@@ -0,0 +1,1428 @@ ++/** @file uap_sdio_mmc.c ++ * @brief This file contains SDIO IF (interface) module ++ * related functions. ++ * ++ * Copyright (C) 2007-2009, Marvell International Ltd. ++ * ++ * This software file (the "File") is distributed by Marvell International ++ * Ltd. under the terms of the GNU General Public License Version 2, June 1991 ++ * (the "License"). You may use, redistribute and/or modify this File in ++ * accordance with the terms and conditions of the License, a copy of which ++ * is available along with the File in the gpl.txt file or by writing to ++ * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA ++ * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt. ++ * ++ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ++ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about ++ * this warranty disclaimer. ++ * ++ */ ++/**************************************************** ++Change log: ++****************************************************/ ++ ++#include "uap_sdio_mmc.h" ++ ++#include <linux/firmware.h> ++ ++/** define SDIO block size */ ++/* We support up to 480-byte block size due to FW buffer limitation. */ ++#define SD_BLOCK_SIZE 256 ++ ++/** define allocated buffer size */ ++#define ALLOC_BUF_SIZE (((MAX(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, \ ++ MRVDRV_SIZE_OF_CMD_BUFFER) + INTF_HEADER_LEN \ ++ + SD_BLOCK_SIZE - 1) / SD_BLOCK_SIZE) * SD_BLOCK_SIZE) ++ ++/** Max retry number of CMD53 write */ ++#define MAX_WRITE_IOMEM_RETRY 2 ++ ++/******************************************************** ++ Local Variables ++********************************************************/ ++ ++/** SDIO Rx unit */ ++static u8 sdio_rx_unit = 0; ++ ++/**Interrupt status */ ++static u8 sd_ireg = 0; ++/******************************************************** ++ Global Variables ++********************************************************/ ++extern u8 *helper_name; ++extern u8 *fw_name; ++/** Default helper name */ ++#define DEFAULT_HELPER_NAME "mrvl/helper_sd.bin" ++/** Default firmware name */ ++#define DEFAULT_FW_NAME "mrvl/sd8688_ap.bin" ++ ++/******************************************************** ++ Local Functions ++********************************************************/ ++/** ++ * @brief This function reads the IO register. ++ * ++ * @param priv A pointer to uap_private structure ++ * @param reg register to be read ++ * @param dat A pointer to variable that keeps returned value ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++sbi_read_ioreg(uap_private * priv, u32 reg, u8 * dat) ++{ ++ struct sdio_mmc_card *card; ++ int ret = UAP_STATUS_FAILURE; ++ ++ ENTER(); ++ ++ card = priv->uap_dev.card; ++ if (!card || !card->func) { ++ PRINTM(ERROR, "sbi_read_ioreg(): card or function is NULL!\n"); ++ goto done; ++ } ++ ++ *dat = sdio_readb(card->func, reg, &ret); ++ if (ret) { ++ PRINTM(ERROR, "sbi_read_ioreg(): sdio_readb failed! ret=%d\n", ret); ++ goto done; ++ } ++ ++ PRINTM(INFO, "sbi_read_ioreg() priv=%p func=%d reg=%#x dat=%#x\n", priv, ++ card->func->num, reg, *dat); ++ ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function writes the IO register. ++ * ++ * @param priv A pointer to uap_private structure ++ * @param reg register to be written ++ * @param dat the value to be written ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++sbi_write_ioreg(uap_private * priv, u32 reg, u8 dat) ++{ ++ struct sdio_mmc_card *card; ++ int ret = UAP_STATUS_FAILURE; ++ ++ ENTER(); ++ ++ card = priv->uap_dev.card; ++ if (!card || !card->func) { ++ PRINTM(ERROR, "sbi_write_ioreg(): card or function is NULL!\n"); ++ goto done; ++ } ++ ++ PRINTM(INFO, "sbi_write_ioreg() priv=%p func=%d reg=%#x dat=%#x\n", priv, ++ card->func->num, reg, dat); ++ ++ sdio_writeb(card->func, dat, reg, &ret); ++ if (ret) { ++ PRINTM(ERROR, "sbi_write_ioreg(): sdio_readb failed! ret=%d\n", ret); ++ goto done; ++ } ++ ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function get rx_unit value ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++sd_get_rx_unit(uap_private * priv) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ u8 reg; ++ ++ ENTER(); ++ ++ ret = sbi_read_ioreg(priv, CARD_RX_UNIT_REG, ®); ++ if (ret == UAP_STATUS_SUCCESS) ++ sdio_rx_unit = reg; ++ ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function reads rx length ++ * ++ * @param priv A pointer to uap_private structure ++ * @param dat A pointer to keep returned data ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++sd_read_rx_len(uap_private * priv, u16 * dat) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ u8 reg; ++ ++ ENTER(); ++ ++ ret = sbi_read_ioreg(priv, CARD_RX_LEN_REG, ®); ++ if (ret == UAP_STATUS_SUCCESS) ++ *dat = (u16) reg << sdio_rx_unit; ++ ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function reads fw status registers ++ * ++ * @param priv A pointer to uap_private structure ++ * @param dat A pointer to keep returned data ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++sd_read_firmware_status(uap_private * priv, u16 * dat) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ u8 fws0; ++ u8 fws1; ++ ++ ENTER(); ++ ++ ret = sbi_read_ioreg(priv, CARD_FW_STATUS0_REG, &fws0); ++ if (ret < 0) { ++ LEAVE(); ++ return UAP_STATUS_FAILURE; ++ } ++ ++ ret = sbi_read_ioreg(priv, CARD_FW_STATUS1_REG, &fws1); ++ if (ret < 0) { ++ LEAVE(); ++ return UAP_STATUS_FAILURE; ++ } ++ ++ *dat = (((u16) fws1) << 8) | fws0; ++ ++ LEAVE(); ++ return UAP_STATUS_SUCCESS; ++} ++ ++/** ++ * @brief This function polls the card status register. ++ * ++ * @param priv A pointer to uap_private structure ++ * @param bits the bit mask ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++mv_sdio_poll_card_status(uap_private * priv, u8 bits) ++{ ++ int tries; ++ u8 cs; ++ ++ ENTER(); ++ ++ for (tries = 0; tries < MAX_POLL_TRIES; tries++) { ++ if (sbi_read_ioreg(priv, CARD_STATUS_REG, &cs) < 0) ++ break; ++ else if ((cs & bits) == bits) { ++ LEAVE(); ++ return UAP_STATUS_SUCCESS; ++ } ++ udelay(10); ++ } ++ ++ PRINTM(WARN, "mv_sdio_poll_card_status failed, tries = %d\n", tries); ++ ++ LEAVE(); ++ return UAP_STATUS_FAILURE; ++} ++ ++/** ++ * @brief This function set the sdio bus width. ++ * ++ * @param priv A pointer to uap_private structure ++ * @param mode 1--1 bit mode, 4--4 bit mode ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++#if 0 ++static int ++sdio_set_bus_width(uap_private * priv, u8 mode) ++{ ++ ENTER(); ++ LEAVE(); ++ return UAP_STATUS_SUCCESS; ++} ++#endif ++ ++/** ++ * @brief This function reads data from the card. ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++sd_card_to_host(uap_private * priv) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ u16 buf_len = 0; ++ int buf_block_len; ++ int blksz; ++ struct sk_buff *skb = NULL; ++ u16 type; ++ u8 *payload = NULL; ++ struct sdio_mmc_card *card = priv->uap_dev.card; ++ ++ ENTER(); ++ ++ if (!card || !card->func) { ++ PRINTM(ERROR, "card or function is NULL!\n"); ++ ret = UAP_STATUS_FAILURE; ++ goto exit; ++ } ++ ++ /* Read the length of data to be transferred */ ++ ret = sd_read_rx_len(priv, &buf_len); ++ if (ret < 0) { ++ PRINTM(ERROR, "card_to_host, read scratch reg failed\n"); ++ ret = UAP_STATUS_FAILURE; ++ goto exit; ++ } ++ ++ /* Allocate buffer */ ++ blksz = SD_BLOCK_SIZE; ++ buf_block_len = (buf_len + blksz - 1) / blksz; ++ if (buf_len <= INTF_HEADER_LEN || (buf_block_len * blksz) > ALLOC_BUF_SIZE) { ++ PRINTM(ERROR, "card_to_host, invalid packet length: %d\n", buf_len); ++ ret = UAP_STATUS_FAILURE; ++ goto exit; ++ } ++#ifdef PXA3XX_DMA_ALIGN ++ skb = dev_alloc_skb(buf_block_len * blksz + PXA3XX_DMA_ALIGNMENT); ++#else ++ skb = dev_alloc_skb(buf_block_len * blksz); ++#endif ++ if (skb == NULL) { ++ PRINTM(WARN, "No free skb\n"); ++ goto exit; ++ } ++#ifdef PXA3XX_DMA_ALIGN ++ if ((u32) skb->data & (PXA3XX_DMA_ALIGNMENT - 1)) { ++ skb_put(skb, (u32) skb->data & (PXA3XX_DMA_ALIGNMENT - 1)); ++ skb_pull(skb, (u32) skb->data & (PXA3XX_DMA_ALIGNMENT - 1)); ++ } ++#endif /* PXA3XX_DMA_ALIGN */ ++ ++ payload = skb->tail; ++ ret = sdio_readsb(card->func, payload, priv->uap_dev.ioport, ++ buf_block_len * blksz); ++ if (ret < 0) { ++ PRINTM(ERROR, "card_to_host, read iomem failed: %d\n", ret); ++ ret = UAP_STATUS_FAILURE; ++ goto exit; ++ } ++ HEXDUMP("SDIO Blk Rd", payload, blksz * buf_block_len); ++ /* ++ * This is SDIO specific header ++ * u16 length, ++ * u16 type (MV_TYPE_DAT = 0, MV_TYPE_CMD = 1, MV_TYPE_EVENT = 3) ++ */ ++ buf_len = uap_le16_to_cpu(*(u16 *) & payload[0]); ++ type = uap_le16_to_cpu(*(u16 *) & payload[2]); ++ switch (type) { ++ case MV_TYPE_EVENT: ++ skb_put(skb, buf_len); ++ skb_pull(skb, INTF_HEADER_LEN); ++ uap_process_event(priv, skb->data, skb->len); ++ kfree_skb(skb); ++ skb = NULL; ++ break; ++ case MV_TYPE_CMD: ++ skb_put(skb, buf_len); ++ skb_pull(skb, INTF_HEADER_LEN); ++ priv->adapter->cmd_pending = FALSE; ++ if (priv->adapter->cmd_wait_option == ++ HostCmd_OPTION_WAITFORRSP_SLEEPCONFIRM) { ++ priv->adapter->cmd_wait_option = FALSE; ++ uap_process_sleep_confirm_resp(priv, skb->data, skb->len); ++ } else if (priv->adapter->cmd_wait_option) { ++ memcpy(priv->adapter->CmdBuf, skb->data, skb->len); ++ priv->adapter->CmdSize = skb->len; ++ priv->adapter->cmd_wait_option = FALSE; ++ priv->adapter->CmdWaitQWoken = TRUE; ++ wake_up_interruptible(&priv->adapter->cmdwait_q); ++ } ++ kfree_skb(skb); ++ skb = NULL; ++ break; ++ case MV_TYPE_DAT: ++ skb_put(skb, buf_len); ++ skb_pull(skb, INTF_HEADER_LEN); ++ uap_process_rx_packet(priv, skb); ++ break; ++ default: ++ priv->stats.rx_errors++; ++ priv->stats.rx_dropped++; ++ /* Driver specified event and command resp should be handle here */ ++ PRINTM(INFO, "Unknown PKT type:%d\n", type); ++ kfree_skb(skb); ++ skb = NULL; ++ break; ++ } ++ exit: ++ if (ret) { ++ if (skb) ++ kfree_skb(skb); ++ } ++ ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function enables the host interrupts mask ++ * ++ * @param priv A pointer to uap_private structure ++ * @param mask the interrupt mask ++ * @return UAP_STATUS_SUCCESS ++ */ ++static int ++enable_host_int_mask(uap_private * priv, u8 mask) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ ++ ENTER(); ++ ++ /* Simply write the mask to the register */ ++ ret = sbi_write_ioreg(priv, HOST_INT_MASK_REG, mask); ++ ++ if (ret) { ++ PRINTM(WARN, "Unable to enable the host interrupt!\n"); ++ ret = UAP_STATUS_FAILURE; ++ } ++ ++ LEAVE(); ++ return ret; ++} ++ ++/** @brief This function disables the host interrupts mask. ++ * ++ * @param priv A pointer to uap_private structure ++ * @param mask the interrupt mask ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++disable_host_int_mask(uap_private * priv, u8 mask) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ u8 host_int_mask; ++ ++ ENTER(); ++ ++ /* Read back the host_int_mask register */ ++ ret = sbi_read_ioreg(priv, HOST_INT_MASK_REG, &host_int_mask); ++ if (ret) { ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ ++ /* Update with the mask and write back to the register */ ++ host_int_mask &= ~mask; ++ ret = sbi_write_ioreg(priv, HOST_INT_MASK_REG, host_int_mask); ++ if (ret < 0) { ++ PRINTM(WARN, "Unable to diable the host interrupt!\n"); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/******************************************************** ++ Global Functions ++********************************************************/ ++ ++/** ++ * @brief This function handles the interrupt. ++ * ++ * @param func A pointer to sdio_func structure. ++ * @return n/a ++ */ ++static void ++sbi_interrupt(struct sdio_func *func) ++{ ++ struct sdio_mmc_card *card; ++ uap_private *priv; ++ u8 ireg = 0; ++ int ret = UAP_STATUS_SUCCESS; ++ ++ ENTER(); ++ ++ card = sdio_get_drvdata(func); ++ if (!card || !card->priv) { ++ PRINTM(MSG, "%s: sbi_interrupt(%p) card or priv is NULL, card=%p\n", ++ __FUNCTION__, func, card); ++ LEAVE(); ++ return; ++ } ++ priv = card->priv; ++#ifdef FW_WAKEUP_TIME ++ if ((priv->adapter->wt_pwrup_sending != 0L) && ++ (priv->adapter->wt_int == 0L)) ++ priv->adapter->wt_int = get_utimeofday(); ++#endif ++ ++ ireg = sdio_readb(card->func, HOST_INTSTATUS_REG, &ret); ++ if (ret) { ++ PRINTM(WARN, "sdio_read_ioreg: read int status register failed\n"); ++ goto done; ++ } ++ if (ireg != 0) { ++ /* ++ * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS ++ * Clear the interrupt status register and re-enable the interrupt ++ */ ++ PRINTM(INFO, "sdio_ireg = 0x%x\n", ireg); ++ sdio_writeb(card->func, ++ ~(ireg) & (DN_LD_HOST_INT_STATUS | UP_LD_HOST_INT_STATUS), ++ HOST_INTSTATUS_REG, &ret); ++ if (ret) { ++ PRINTM(WARN, ++ "sdio_write_ioreg: clear int status register failed\n"); ++ goto done; ++ } ++ } ++ OS_INT_DISABLE; ++ sd_ireg |= ireg; ++ OS_INT_RESTORE; ++ ++ uap_interrupt(priv); ++ done: ++ LEAVE(); ++} ++ ++/** ++ * @brief This function probe the card ++ * ++ * @param func A pointer to sdio_func structure ++ * @param id A pointer to structure sd_device_id ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++static int ++uap_probe(struct sdio_func *func, const struct sdio_device_id *id) ++{ ++ int ret = UAP_STATUS_FAILURE; ++ struct sdio_mmc_card *card = NULL; ++ ++ ENTER(); ++ ++ PRINTM(MSG, "%s: vendor=0x%4.04X device=0x%4.04X class=%d function=%d\n", ++ __FUNCTION__, func->vendor, func->device, func->class, func->num); ++ ++ card = kzalloc(sizeof(struct sdio_mmc_card), GFP_KERNEL); ++ if (!card) { ++ ret = -ENOMEM; ++ goto done; ++ } ++ ++ card->func = func; ++ ++ if (!uap_add_card(card)) { ++ PRINTM(ERROR, "%s: uap_add_callback failed\n", __FUNCTION__); ++ kfree(card); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ ++ ret = UAP_STATUS_SUCCESS; ++ ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function removes the card ++ * ++ * @param func A pointer to sdio_func structure ++ * @return N/A ++ */ ++static void ++uap_remove(struct sdio_func *func) ++{ ++ struct sdio_mmc_card *card; ++ ++ ENTER(); ++ ++ if (func) { ++ card = sdio_get_drvdata(func); ++ if (card) { ++ uap_remove_card(card); ++ kfree(card); ++ } ++ } ++ ++ LEAVE(); ++} ++ ++#ifdef CONFIG_PM ++/** ++ * @brief This function handles client driver suspend ++ * ++ * @param func A pointer to sdio_func structure ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int ++uap_suspend(struct sdio_func *func) ++{ ++ ENTER(); ++ LEAVE(); ++ return 0; ++} ++ ++/** ++ * @brief This function handles client driver resume ++ * ++ * @param func A pointer to sdio_func structure ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int ++uap_resume(struct sdio_func *func) ++{ ++ ENTER(); ++ LEAVE(); ++ return 0; ++} ++#endif ++ ++/** Device ID for SD8688 */ ++#define SD_DEVICE_ID_8688_UAP 0x9104 ++/** UAP IDs */ ++static const struct sdio_device_id uap_ids[] = { ++ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SD_DEVICE_ID_8688_UAP)}, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(sdio, uap_ids); ++ ++static struct sdio_driver uap_sdio = { ++ .name = "uap_sdio", ++ .id_table = uap_ids, ++ .probe = uap_probe, ++ .remove = uap_remove, ++#ifdef CONFIG_PM ++/* .suspend = uap_suspend, */ ++/* .resume = uap_resume, */ ++#endif ++ ++}; ++ ++/** ++ * @brief This function registers the IF module in bus driver. ++ * ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int __init ++sbi_register() ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ ++ ENTER(); ++ ++ /* SDIO Driver Registration */ ++ if (sdio_register_driver(&uap_sdio) != 0) { ++ PRINTM(FATAL, "SDIO Driver Registration Failed \n"); ++ ret = UAP_STATUS_FAILURE; ++ } ++ ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function de-registers the IF module in bus driver. ++ * ++ * @return n/a ++ */ ++void __exit ++sbi_unregister(void) ++{ ++ ENTER(); ++ ++ /* SDIO Driver Unregistration */ ++ sdio_unregister_driver(&uap_sdio); ++ ++ LEAVE(); ++} ++ ++/** ++ * @brief This function checks the interrupt status and handle it accordingly. ++ * ++ * @param priv A pointer to uap_private structure ++ * @param ireg A pointer to variable that keeps returned value ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int ++sbi_get_int_status(uap_private * priv, u8 * ireg) ++{ ++ int ret = UAP_STATUS_SUCCESS; ++ u8 sdio_ireg = 0; ++ struct sdio_mmc_card *card = priv->uap_dev.card; ++ ++ ENTER(); ++ ++ *ireg = 0; ++ OS_INT_DISABLE; ++ sdio_ireg = sd_ireg; ++ sd_ireg = 0; ++ OS_INT_RESTORE; ++ ++ sdio_claim_host(card->func); ++ ++ if (sdio_ireg & DN_LD_HOST_INT_STATUS) { /* tx_done INT */ ++ if (!priv->uap_dev.cmd_sent) { /* tx_done already received */ ++ PRINTM(INFO, ++ "warning: tx_done already received: tx_dnld_rdy=0x%x int status=0x%x\n", ++ priv->uap_dev.cmd_sent, sdio_ireg); ++ } else { ++ priv->uap_dev.cmd_sent = FALSE; ++ priv->uap_dev.data_sent = FALSE; ++ if ( (priv->uap_dev.netdev->reg_state == NETREG_REGISTERED) && (skb_queue_len(&priv->adapter->tx_queue) < TX_LOW_WATERMARK)) { ++ os_start_queue(priv); ++ } ++ } ++ } ++ if (sdio_ireg & UP_LD_HOST_INT_STATUS) { ++ sd_card_to_host(priv); ++ } ++ ++ *ireg = sdio_ireg; ++ ret = UAP_STATUS_SUCCESS; ++ sdio_release_host(card->func); ++ ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function disables the host interrupts. ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int ++sbi_disable_host_int(uap_private * priv) ++{ ++ struct sdio_mmc_card *card = priv->uap_dev.card; ++ int ret; ++ ++ ENTER(); ++ ++ sdio_claim_host(card->func); ++ ret = disable_host_int_mask(priv, HIM_DISABLE); ++ sdio_release_host(card->func); ++ ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function enables the host interrupts. ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS ++ */ ++int ++sbi_enable_host_int(uap_private * priv) ++{ ++ struct sdio_mmc_card *card = priv->uap_dev.card; ++ int ret; ++ ++ ENTER(); ++ ++ sdio_claim_host(card->func); ++ ret = enable_host_int_mask(priv, HIM_ENABLE); ++ sdio_release_host(card->func); ++ ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function de-registers the device. ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS ++ */ ++int ++sbi_unregister_dev(uap_private * priv) ++{ ++ struct sdio_mmc_card *card = priv->uap_dev.card; ++ ++ ENTER(); ++ ++ if (!card || !card->func) { ++ PRINTM(ERROR, "Error: card or function is NULL!\n"); ++ goto done; ++ } ++ ++ sdio_claim_host(card->func); ++ sdio_release_irq(card->func); ++ sdio_disable_func(card->func); ++ sdio_release_host(card->func); ++ ++ sdio_set_drvdata(card->func, NULL); ++ ++ done: ++ LEAVE(); ++ return UAP_STATUS_SUCCESS; ++} ++ ++/** ++ * @brief This function registers the device. ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int ++sbi_register_dev(uap_private * priv) ++{ ++ int ret = UAP_STATUS_FAILURE; ++ u8 reg; ++ struct sdio_mmc_card *card = priv->uap_dev.card; ++ struct sdio_func *func; ++ ++ ENTER(); ++ ++ if (!card || !card->func) { ++ PRINTM(ERROR, "Error: card or function is NULL!\n"); ++ goto done; ++ } ++ ++ func = card->func; ++ ++ /* Initialize the private structure */ ++ priv->uap_dev.ioport = 0; ++ ++ sdio_claim_host(func); ++ ++ ret = sdio_enable_func(func); ++ if (ret) { ++ PRINTM(FATAL, "sdio_enable_func() failed: ret=%d\n", ret); ++ goto release_host; ++ } ++ ++ ret = sdio_claim_irq(func, sbi_interrupt); ++ if (ret) { ++ PRINTM(FATAL, "sdio_claim_irq failed: ret=%d\n", ret); ++ goto disable_func; ++ } ++ ++ /* Read the IO port */ ++ ret = sbi_read_ioreg(priv, IO_PORT_0_REG, ®); ++ if (ret) ++ goto release_irq; ++ else ++ priv->uap_dev.ioport |= reg; ++ ++ ret = sbi_read_ioreg(priv, IO_PORT_1_REG, ®); ++ if (ret) ++ goto release_irq; ++ else ++ priv->uap_dev.ioport |= (reg << 8); ++ ++ ret = sbi_read_ioreg(priv, IO_PORT_2_REG, ®); ++ if (ret) ++ goto release_irq; ++ else ++ priv->uap_dev.ioport |= (reg << 16); ++ ++ PRINTM(INFO, "SDIO FUNC #%d IO port: 0x%x\n", func->num, ++ priv->uap_dev.ioport); ++ ++ ret = sdio_set_block_size(card->func, SD_BLOCK_SIZE); ++ if (ret) { ++ PRINTM(ERROR, "%s: cannot set SDIO block size\n", __FUNCTION__); ++ ret = UAP_STATUS_FAILURE; ++ goto release_irq; ++ } ++ priv->hotplug_device = &func->dev; ++ ++ if (helper_name == NULL) { ++ helper_name = DEFAULT_HELPER_NAME; ++ } ++ if (fw_name == NULL) { ++ fw_name = DEFAULT_FW_NAME; ++ } ++ sdio_release_host(func); ++ ++ sdio_set_drvdata(func, card); ++ ++ ret = UAP_STATUS_SUCCESS; ++ goto done; ++ ++ release_irq: ++ sdio_release_irq(func); ++ disable_func: ++ sdio_disable_func(func); ++ release_host: ++ sdio_release_host(func); ++ ++ done: ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function sends data to the card. ++ * ++ * @param priv A pointer to uap_private structure ++ * @param payload A pointer to the data/cmd buffer ++ * @param nb the length of data/cmd ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int ++sbi_host_to_card(uap_private * priv, u8 * payload, u16 nb) ++{ ++ struct sdio_mmc_card *card = priv->uap_dev.card; ++ int ret = UAP_STATUS_SUCCESS; ++ int buf_block_len; ++ int blksz; ++ int i = 0; ++ u8 *buf = NULL; ++#ifdef PXA3XX_DMA_ALIGN ++ void *tmpbuf = NULL; ++ int tmpbufsz; ++#endif ++ ++ ENTER(); ++ ++ if (!card || !card->func) { ++ PRINTM(ERROR, "card or function is NULL!\n"); ++ LEAVE(); ++ return UAP_STATUS_FAILURE; ++ } ++ buf = payload; ++#ifdef PXA3XX_DMA_ALIGN ++ if ((u32) payload & (PXA3XX_DMA_ALIGNMENT - 1)) { ++ tmpbufsz = ALIGN_SZ(nb, PXA3XX_DMA_ALIGNMENT); ++ tmpbuf = kmalloc(tmpbufsz, GFP_KERNEL); ++ memset(tmpbuf, 0, tmpbufsz); ++ /* Ensure 8-byte aligned CMD buffer */ ++ buf = (u8 *) ALIGN_ADDR(tmpbuf, PXA3XX_DMA_ALIGNMENT); ++ memcpy(buf, payload, nb); ++ } ++#endif ++ /* Allocate buffer and copy payload */ ++ blksz = SD_BLOCK_SIZE; ++ buf_block_len = (nb + blksz - 1) / blksz; ++ sdio_claim_host(card->func); ++#define MAX_WRITE_IOMEM_RETRY 2 ++ priv->uap_dev.cmd_sent = TRUE; ++ priv->uap_dev.data_sent = TRUE; ++ do { ++ /* Transfer data to card */ ++ ret = sdio_writesb(card->func, priv->uap_dev.ioport, buf, ++ buf_block_len * blksz); ++ if (ret < 0) { ++ i++; ++ PRINTM(ERROR, "host_to_card, write iomem (%d) failed: %d\n", i, ++ ret); ++ ret = UAP_STATUS_FAILURE; ++ if (i > MAX_WRITE_IOMEM_RETRY) ++ goto exit; ++ } else { ++ HEXDUMP("SDIO Blk Wr", payload, nb); ++ } ++ } while (ret == UAP_STATUS_FAILURE); ++ exit: ++ sdio_release_host(card->func); ++#ifdef PXA3XX_DMA_ALIGN ++ if (tmpbuf) ++ kfree(tmpbuf); ++#endif ++ if (ret == UAP_STATUS_FAILURE) { ++ priv->uap_dev.cmd_sent = FALSE; ++ priv->uap_dev.data_sent = FALSE; ++ } ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function reads CIS information. ++ * ++ * @param priv A pointer to uap_private structure ++ * @param cisinfo A pointer to CIS information output buffer ++ * @param cislen A pointer to length of CIS info output buffer ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++#if 0 ++static int ++sbi_get_cis_info(uap_private * priv, void *cisinfo, int *cislen) ++{ ++#define CIS_PTR (0x8000) ++ struct sdio_mmc_card *card = priv->uap_dev.card; ++ unsigned int i, cis_ptr = CIS_PTR; ++ int ret = UAP_STATUS_FAILURE; ++ ++ ENTER(); ++ ++ if (!card || !card->func) { ++ PRINTM(ERROR, "sbi_get_cis_info(): card or function is NULL!\n"); ++ goto exit; ++ } ++#define MAX_SDIO_CIS_INFO_LEN (256) ++ if (!cisinfo || (*cislen < MAX_SDIO_CIS_INFO_LEN)) { ++ PRINTM(WARN, "ERROR! get_cis_info: insufficient buffer passed\n"); ++ goto exit; ++ } ++ ++ *cislen = MAX_SDIO_CIS_INFO_LEN; ++ ++ sdio_claim_host(card->func); ++ ++ PRINTM(INFO, "cis_ptr=%#x\n", cis_ptr); ++ ++ /* Read the Tuple Data */ ++ for (i = 0; i < *cislen; i++) { ++ ((unsigned char *) cisinfo)[i] = ++ sdio_readb(card->func, cis_ptr + i, &ret); ++ if (ret) { ++ PRINTM(WARN, "get_cis_info error: ret=%d\n", ret); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ PRINTM(INFO, "cisinfo[%d]=%#x\n", i, ((unsigned char *) cisinfo)[i]); ++ } ++ ++ done: ++ sdio_release_host(card->func); ++ exit: ++ LEAVE(); ++ return ret; ++} ++#endif ++/** ++ * @brief This function downloads helper image to the card. ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int ++sbi_prog_helper(uap_private * priv) ++{ ++ struct sdio_mmc_card *card = priv->uap_dev.card; ++ u8 *helper = NULL; ++ int helperlen; ++ int ret = UAP_STATUS_SUCCESS; ++ void *tmphlprbuf = NULL; ++ int tmphlprbufsz; ++ u8 *hlprbuf; ++ int hlprblknow; ++ u32 tx_len; ++#ifdef FW_DOWNLOAD_SPEED ++ u32 tv1, tv2; ++#endif ++ ++ ENTER(); ++ ++ if (!card || !card->func) { ++ PRINTM(ERROR, "sbi_prog_helper(): card or function is NULL!\n"); ++ goto done; ++ } ++ ++ if (priv->fw_helper) { ++ helper = (u8 *) priv->fw_helper->data; ++ helperlen = priv->fw_helper->size; ++ } else { ++ PRINTM(MSG, "No helper image found! Terminating download.\n"); ++ LEAVE(); ++ return UAP_STATUS_FAILURE; ++ } ++ ++ PRINTM(INFO, "Downloading helper image (%d bytes), block size %d bytes\n", ++ helperlen, SD_BLOCK_SIZE); ++ ++#ifdef FW_DOWNLOAD_SPEED ++ tv1 = get_utimeofday(); ++#endif ++ ++#ifdef PXA3XX_DMA_ALIGN ++ tmphlprbufsz = ALIGN_SZ(UAP_UPLD_SIZE, PXA3XX_DMA_ALIGNMENT); ++#else /* !PXA3XX_DMA_ALIGN */ ++ tmphlprbufsz = UAP_UPLD_SIZE; ++#endif /* !PXA3XX_DMA_ALIGN */ ++ tmphlprbuf = kmalloc(tmphlprbufsz, GFP_KERNEL); ++ if (!tmphlprbuf) { ++ PRINTM(ERROR, ++ "Unable to allocate buffer for helper. Terminating download\n"); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ memset(tmphlprbuf, 0, tmphlprbufsz); ++#ifdef PXA3XX_DMA_ALIGN ++ hlprbuf = (u8 *) ALIGN_ADDR(tmphlprbuf, PXA3XX_DMA_ALIGNMENT); ++#else /* !PXA3XX_DMA_ALIGN */ ++ hlprbuf = (u8 *) tmphlprbuf; ++#endif /* !PXA3XX_DMA_ALIGN */ ++ ++ sdio_claim_host(card->func); ++ ++ /* Perform helper data transfer */ ++ tx_len = (FIRMWARE_TRANSFER_NBLOCK * SD_BLOCK_SIZE) - INTF_HEADER_LEN; ++ hlprblknow = 0; ++ do { ++ /* The host polls for the DN_LD_CARD_RDY and CARD_IO_READY bits */ ++ ret = mv_sdio_poll_card_status(priv, CARD_IO_READY | DN_LD_CARD_RDY); ++ if (ret < 0) { ++ PRINTM(FATAL, "Helper download poll status timeout @ %d\n", ++ hlprblknow); ++ goto done; ++ } ++ ++ /* More data? */ ++ if (hlprblknow >= helperlen) ++ break; ++ ++ /* Set blocksize to transfer - checking for last block */ ++ if (helperlen - hlprblknow < tx_len) ++ tx_len = helperlen - hlprblknow; ++ ++ /* Set length to the 4-byte header */ ++ *(u32 *) hlprbuf = uap_cpu_to_le32(tx_len); ++ ++ /* Copy payload to buffer */ ++ memcpy(&hlprbuf[INTF_HEADER_LEN], &helper[hlprblknow], tx_len); ++ ++ PRINTM(INFO, "."); ++ ++ /* Send data */ ++ ret = sdio_writesb(card->func, priv->uap_dev.ioport, ++ hlprbuf, FIRMWARE_TRANSFER_NBLOCK * SD_BLOCK_SIZE); ++ ++ if (ret < 0) { ++ PRINTM(FATAL, "IO error during helper download @ %d\n", hlprblknow); ++ goto done; ++ } ++ ++ hlprblknow += tx_len; ++ } while (TRUE); ++ ++#ifdef FW_DOWNLOAD_SPEED ++ tv2 = get_utimeofday(); ++ PRINTM(INFO, "helper: %ld.%03ld.%03ld ", tv1 / 1000000, ++ (tv1 % 1000000) / 1000, tv1 % 1000); ++ PRINTM(INFO, " -> %ld.%03ld.%03ld ", tv2 / 1000000, (tv2 % 1000000) / 1000, ++ tv2 % 1000); ++ tv2 -= tv1; ++ PRINTM(INFO, " == %ld.%03ld.%03ld\n", tv2 / 1000000, (tv2 % 1000000) / 1000, ++ tv2 % 1000); ++#endif ++ ++ /* Write last EOF data */ ++ PRINTM(INFO, "\nTransferring helper image EOF block\n"); ++ memset(hlprbuf, 0x0, SD_BLOCK_SIZE); ++ ret = sdio_writesb(card->func, priv->uap_dev.ioport, ++ hlprbuf, SD_BLOCK_SIZE); ++ ++ if (ret < 0) { ++ PRINTM(FATAL, "IO error in writing helper image EOF block\n"); ++ goto done; ++ } ++ ++ ret = UAP_STATUS_SUCCESS; ++ ++ done: ++ sdio_release_host(card->func); ++ if (tmphlprbuf) ++ kfree(tmphlprbuf); ++ ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function downloads firmware image to the card. ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int ++sbi_prog_fw_w_helper(uap_private * priv) ++{ ++ struct sdio_mmc_card *card = priv->uap_dev.card; ++ u8 *firmware = NULL; ++ int firmwarelen; ++ u8 base0; ++ u8 base1; ++ int ret = UAP_STATUS_SUCCESS; ++ int offset; ++ void *tmpfwbuf = NULL; ++ int tmpfwbufsz; ++ u8 *fwbuf; ++ u16 len; ++ int txlen = 0; ++ int tx_blocks = 0; ++ int i = 0; ++ int tries = 0; ++#ifdef FW_DOWNLOAD_SPEED ++ u32 tv1, tv2; ++#endif ++ ++ ENTER(); ++ ++ if (!card || !card->func) { ++ PRINTM(ERROR, "sbi_prog_fw_w_helper(): card or function is NULL!\n"); ++ goto done; ++ } ++ ++ if (priv->firmware) { ++ firmware = (u8 *) priv->firmware->data; ++ firmwarelen = priv->firmware->size; ++ } else { ++ PRINTM(MSG, "No firmware image found! Terminating download.\n"); ++ LEAVE(); ++ return UAP_STATUS_FAILURE; ++ } ++ ++ PRINTM(INFO, "Downloading FW image (%d bytes)\n", firmwarelen); ++ ++#ifdef FW_DOWNLOAD_SPEED ++ tv1 = get_utimeofday(); ++#endif ++ ++#ifdef PXA3XX_DMA_ALIGN ++ tmpfwbufsz = ALIGN_SZ(UAP_UPLD_SIZE, PXA3XX_DMA_ALIGNMENT); ++#else /* PXA3XX_DMA_ALIGN */ ++ tmpfwbufsz = UAP_UPLD_SIZE; ++#endif /* PXA3XX_DMA_ALIGN */ ++ tmpfwbuf = kmalloc(tmpfwbufsz, GFP_KERNEL); ++ if (!tmpfwbuf) { ++ PRINTM(ERROR, ++ "Unable to allocate buffer for firmware. Terminating download.\n"); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ memset(tmpfwbuf, 0, tmpfwbufsz); ++#ifdef PXA3XX_DMA_ALIGN ++ /* Ensure 8-byte aligned firmware buffer */ ++ fwbuf = (u8 *) ALIGN_ADDR(tmpfwbuf, PXA3XX_DMA_ALIGNMENT); ++#else /* PXA3XX_DMA_ALIGN */ ++ fwbuf = (u8 *) tmpfwbuf; ++#endif /* PXA3XX_DMA_ALIGN */ ++ ++ sdio_claim_host(card->func); ++ ++ /* Perform firmware data transfer */ ++ offset = 0; ++ do { ++ /* The host polls for the DN_LD_CARD_RDY and CARD_IO_READY bits */ ++ ret = mv_sdio_poll_card_status(priv, CARD_IO_READY | DN_LD_CARD_RDY); ++ if (ret < 0) { ++ PRINTM(FATAL, "FW download with helper poll status timeout @ %d\n", ++ offset); ++ goto done; ++ } ++ ++ /* More data? */ ++ if (offset >= firmwarelen) ++ break; ++ ++ for (tries = 0; tries < MAX_POLL_TRIES; tries++) { ++ if ((ret = sbi_read_ioreg(priv, HOST_F1_RD_BASE_0, &base0)) < 0) { ++ PRINTM(WARN, "Dev BASE0 register read failed:" ++ " base0=0x%04X(%d). Terminating download.\n", base0, ++ base0); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ if ((ret = sbi_read_ioreg(priv, HOST_F1_RD_BASE_1, &base1)) < 0) { ++ PRINTM(WARN, "Dev BASE1 register read failed:" ++ " base1=0x%04X(%d). Terminating download.\n", base1, ++ base1); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ len = (((u16) base1) << 8) | base0; ++ ++ /* For SD8688 wait until the length is not 0, 1 or 2 before ++ downloading the first FW block, since BOOT code writes the ++ register to indicate the helper/FW download winner, the value ++ could be 1 or 2 (Func1 or Func2). */ ++ if ((len && offset) || (len > 2)) ++ break; ++ udelay(10); ++ } ++ ++ if (len == 0) ++ break; ++ else if (len > UAP_UPLD_SIZE) { ++ PRINTM(FATAL, "FW download failure @ %d, invalid length %d\n", ++ offset, len); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ ++ txlen = len; ++ ++ if (len & BIT(0)) { ++ i++; ++ if (i > MAX_WRITE_IOMEM_RETRY) { ++ PRINTM(FATAL, ++ "FW download failure @ %d, over max retry count\n", ++ offset); ++ ret = UAP_STATUS_FAILURE; ++ goto done; ++ } ++ PRINTM(ERROR, "FW CRC error indicated by the helper:" ++ " len = 0x%04X, txlen = %d\n", len, txlen); ++ len &= ~BIT(0); ++ /* Setting this to 0 to resend from same offset */ ++ txlen = 0; ++ } else { ++ i = 0; ++ ++ /* Set blocksize to transfer - checking for last block */ ++ if (firmwarelen - offset < txlen) { ++ txlen = firmwarelen - offset; ++ } ++ PRINTM(INFO, "."); ++ ++ tx_blocks = (txlen + SD_BLOCK_SIZE - 1) / SD_BLOCK_SIZE; ++ ++ /* Copy payload to buffer */ ++ memcpy(fwbuf, &firmware[offset], txlen); ++ } ++ ++ /* Send data */ ++ ret = sdio_writesb(card->func, priv->uap_dev.ioport, ++ fwbuf, tx_blocks * SD_BLOCK_SIZE); ++ ++ if (ret < 0) { ++ PRINTM(ERROR, "FW download, write iomem (%d) failed @ %d\n", i, ++ offset); ++ if (sbi_write_ioreg(priv, CONFIGURATION_REG, 0x04) < 0) { ++ PRINTM(ERROR, "write ioreg failed (CFG)\n"); ++ } ++ } ++ ++ offset += txlen; ++ } while (TRUE); ++ ++ PRINTM(INFO, "\nFW download over, size %d bytes\n", offset); ++ ++ ret = UAP_STATUS_SUCCESS; ++ done: ++#ifdef FW_DOWNLOAD_SPEED ++ tv2 = get_utimeofday(); ++ PRINTM(INFO, "FW: %ld.%03ld.%03ld ", tv1 / 1000000, ++ (tv1 % 1000000) / 1000, tv1 % 1000); ++ PRINTM(INFO, " -> %ld.%03ld.%03ld ", tv2 / 1000000, ++ (tv2 % 1000000) / 1000, tv2 % 1000); ++ tv2 -= tv1; ++ PRINTM(INFO, " == %ld.%03ld.%03ld\n", tv2 / 1000000, ++ (tv2 % 1000000) / 1000, tv2 % 1000); ++#endif ++ sdio_release_host(card->func); ++ if (tmpfwbuf) ++ kfree(tmpfwbuf); ++ ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function checks if the firmware is ready to accept ++ * command or not. ++ * ++ * @param priv A pointer to uap_private structure ++ * @param pollnum Poll number ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int ++sbi_check_fw_status(uap_private * priv, int pollnum) ++{ ++ struct sdio_mmc_card *card = priv->uap_dev.card; ++ int ret = UAP_STATUS_SUCCESS; ++ u16 firmwarestat; ++ int tries; ++ ++ ENTER(); ++ ++ sdio_claim_host(card->func); ++ ++ /* Wait for firmware initialization event */ ++ for (tries = 0; tries < pollnum; tries++) { ++ if ((ret = sd_read_firmware_status(priv, &firmwarestat)) < 0) ++ continue; ++ if (firmwarestat == FIRMWARE_READY) { ++ ret = UAP_STATUS_SUCCESS; ++ break; ++ } else { ++ mdelay(10); ++ ret = UAP_STATUS_FAILURE; ++ } ++ } ++ ++ if (ret < 0) ++ goto done; ++ ++ ret = UAP_STATUS_SUCCESS; ++ sd_get_rx_unit(priv); ++ ++ done: ++ sdio_release_host(card->func); ++ ++ LEAVE(); ++ return ret; ++} ++ ++/** ++ * @brief This function set bus clock on/off ++ * ++ * @param priv A pointer to uap_private structure ++ * @param option TRUE--on , FALSE--off ++ * @return UAP_STATUS_SUCCESS ++ */ ++#if 0 ++static int ++sbi_set_bus_clock(uap_private * priv, u8 option) ++{ ++ ENTER(); ++ LEAVE(); ++ return UAP_STATUS_SUCCESS; ++} ++#endif ++ ++/** ++ * @brief This function wakeup firmware ++ * ++ * @param priv A pointer to uap_private structure ++ * @return UAP_STATUS_SUCCESS or UAP_STATUS_FAILURE ++ */ ++int ++sbi_wakeup_firmware(uap_private * priv) ++{ ++ struct sdio_mmc_card *card = priv->uap_dev.card; ++ int ret = UAP_STATUS_SUCCESS; ++ ++ ENTER(); ++ ++ if (!card || !card->func) { ++ PRINTM(ERROR, "card or function is NULL!\n"); ++ LEAVE(); ++ return UAP_STATUS_FAILURE; ++ } ++ sdio_claim_host(card->func); ++ sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret); ++ sdio_release_host(card->func); ++ LEAVE(); ++ return ret; ++} +diff -Naupr linux-2.6.37/drivers/net/wireless/libertas_uap/uap_sdio_mmc.h linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_sdio_mmc.h +--- linux-2.6.37/drivers/net/wireless/libertas_uap/uap_sdio_mmc.h 1969-12-31 17:00:00.000000000 -0700 ++++ linux-2.6.37-new/drivers/net/wireless/libertas_uap/uap_sdio_mmc.h 2011-01-08 06:01:04.057834571 -0700 +@@ -0,0 +1,136 @@ ++/** @file uap_sdio_mmc.h ++ * @brief This file contains SDIO IF (interface) module ++ * related macros, enum, and structure. ++ * ++ * Copyright (C) 2007-2009, Marvell International Ltd. ++ * ++ * This software file (the "File") is distributed by Marvell International ++ * Ltd. under the terms of the GNU General Public License Version 2, June 1991 ++ * (the "License"). You may use, redistribute and/or modify this File in ++ * accordance with the terms and conditions of the License, a copy of which ++ * is available along with the File in the gpl.txt file or by writing to ++ * the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA ++ * 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt. ++ * ++ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ++ * ARE EXPRESSLY DISCLAIMED. The License provides additional details about ++ * this warranty disclaimer. ++ * ++ */ ++/**************************************************** ++Change log: ++ 10/10/07: initial version ++****************************************************/ ++ ++#ifndef _UAP_SDIO_MMC_H ++#define _UAP_SDIO_MMC_H ++ ++#include <linux/mmc/sdio.h> ++#include <linux/mmc/sdio_ids.h> ++#include <linux/mmc/sdio_func.h> ++#include <linux/mmc/card.h> ++ ++#include "uap_headers.h" ++ ++/** The number of times to try when waiting for downloaded firmware to ++ become active. (polling the scratch register). */ ++#define MAX_FIRMWARE_POLL_TRIES 100 ++ ++/** Firmware ready */ ++#define FIRMWARE_READY 0xfedc ++ ++/** Number of firmware blocks to transfer */ ++#define FIRMWARE_TRANSFER_NBLOCK 2 ++ ++/* Host Control Registers */ ++/** Host Control Registers : I/O port 0 */ ++#define IO_PORT_0_REG 0x00 ++/** Host Control Registers : I/O port 1 */ ++#define IO_PORT_1_REG 0x01 ++/** Host Control Registers : I/O port 2 */ ++#define IO_PORT_2_REG 0x02 ++ ++/** Host Control Registers : Configuration */ ++#define CONFIGURATION_REG 0x03 ++/** Host Control Registers : Host without Command 53 finish host */ ++#define HOST_WO_CMD53_FINISH_HOST (0x1U << 2) ++/** Host Control Registers : Host power up */ ++#define HOST_POWER_UP (0x1U << 1) ++/** Host Control Registers : Host power down */ ++#define HOST_POWER_DOWN (0x1U << 0) ++ ++/** Host Control Registers : Host interrupt mask */ ++#define HOST_INT_MASK_REG 0x04 ++/** Host Control Registers : Upload host interrupt mask */ ++#define UP_LD_HOST_INT_MASK (0x1U) ++/** Host Control Registers : Download host interrupt mask */ ++#define DN_LD_HOST_INT_MASK (0x2U) ++/** Enable Host interrupt mask */ ++#define HIM_ENABLE (UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK) ++/** Disable Host interrupt mask */ ++#define HIM_DISABLE 0xff ++ ++/** Host Control Registers : Host interrupt status */ ++#define HOST_INTSTATUS_REG 0x05 ++/** Host Control Registers : Upload host interrupt status */ ++#define UP_LD_HOST_INT_STATUS (0x1U) ++/** Host Control Registers : Download host interrupt status */ ++#define DN_LD_HOST_INT_STATUS (0x2U) ++ ++/** Host F1 read base 0 */ ++#define HOST_F1_RD_BASE_0 0x10 ++/** Host F1 read base 1 */ ++#define HOST_F1_RD_BASE_1 0x11 ++ ++/** Card Control Registers : Card status register */ ++#define CARD_STATUS_REG 0x20 ++/** Card Control Registers : Card I/O ready */ ++#define CARD_IO_READY (0x1U << 3) ++/** Card Control Registers : CIS card ready */ ++#define CIS_CARD_RDY (0x1U << 2) ++/** Card Control Registers : Upload card ready */ ++#define UP_LD_CARD_RDY (0x1U << 1) ++/** Card Control Registers : Download card ready */ ++#define DN_LD_CARD_RDY (0x1U << 0) ++ ++/** Card Control Registers : Card OCR 0 register */ ++#define CARD_OCR_0_REG 0x34 ++/** Card Control Registers : Card OCR 1 register */ ++#define CARD_OCR_1_REG 0x35 ++ ++/** Firmware status 0 register */ ++#define CARD_FW_STATUS0_REG 0x40 ++/** Firmware status 1 register */ ++#define CARD_FW_STATUS1_REG 0x41 ++/** Rx length register */ ++#define CARD_RX_LEN_REG 0x42 ++/** Rx unit register */ ++#define CARD_RX_UNIT_REG 0x43 ++ ++/** Chip Id Register 0 */ ++#define CARD_CHIP_ID_0_REG 0x801c ++/** Chip Id Register 1 */ ++#define CARD_CHIP_ID_1_REG 0x801d ++ ++#ifdef PXA3XX_DMA_ALIGN ++/** DMA alignment value for PXA3XX platforms */ ++#define PXA3XX_DMA_ALIGNMENT 8 ++/** Macros for Data Alignment : size */ ++#define ALIGN_SZ(p, a) \ ++ (((p) + ((a) - 1)) & ~((a) - 1)) ++ ++/** Macros for Data Alignment : address */ ++#define ALIGN_ADDR(p, a) \ ++ ((((u32)(p)) + (((u32)(a)) - 1)) & ~(((u32)(a)) - 1)) ++#endif /* PXA3XX_DMA_ALIGN */ ++ ++struct sdio_mmc_card ++{ ++ /** sdio_func structure pointer */ ++ struct sdio_func *func; ++ /** uap_private structure pointer */ ++ uap_private *priv; ++}; ++ ++#endif /* _UAP_SDIO_MMC_H */ diff --git a/with-linux-3.4/linux-3.0.4-LIBERTAS-WEXT_PRIV.patch b/with-linux-3.4/linux-3.0.4-LIBERTAS-WEXT_PRIV.patch new file mode 100644 index 0000000..2c91ef1 --- /dev/null +++ b/with-linux-3.4/linux-3.0.4-LIBERTAS-WEXT_PRIV.patch @@ -0,0 +1,10 @@ +--- ./drivers/net/wireless/libertas/Kconfig.orig 2011-08-29 14:56:30.000000000 -0600 ++++ ./drivers/net/wireless/libertas/Kconfig 2011-09-13 20:37:23.660904556 -0600 +@@ -3,6 +3,7 @@ config LIBERTAS + depends on CFG80211 + select WIRELESS_EXT + select WEXT_SPY ++ select WEXT_PRIV + select LIB80211 + select FW_LOADER + ---help--- diff --git a/with-linux-3.4/mvsdio-1-2.6.30.patch b/with-linux-3.4/mvsdio-1-2.6.30.patch new file mode 100644 index 0000000..63f0156 --- /dev/null +++ b/with-linux-3.4/mvsdio-1-2.6.30.patch @@ -0,0 +1,18 @@ +--- ./drivers/mmc/host/mvsdio.c.orig 2009-06-09 21:05:27.000000000 -0600 ++++ ./drivers/mmc/host/mvsdio.c 2009-06-23 23:20:36.085662093 -0600 +@@ -21,6 +21,7 @@ + #include <linux/irq.h> + #include <linux/gpio.h> + #include <linux/mmc/host.h> ++#include <linux/mmc/sd.h> + + #include <asm/sizes.h> + #include <asm/unaligned.h> +@@ -148,6 +149,7 @@ static void mvsd_request(struct mmc_host + + dev_dbg(host->dev, "cmd %d (hw state 0x%04x)\n", + cmd->opcode, mvsd_read(MVSD_HW_STATE)); ++ if (cmd->opcode == SD_SWITCH) mdelay(1); /* Voodoo */ + + cmdreg = MVSD_CMD_INDEX(cmd->opcode); + diff --git a/with-linux-3.4/mvsdio-2.patch b/with-linux-3.4/mvsdio-2.patch new file mode 100644 index 0000000..8d53f2a --- /dev/null +++ b/with-linux-3.4/mvsdio-2.patch @@ -0,0 +1,35 @@ +From: Nicolas Pitre <nico@cam.org> +Date: Tue, 28 Apr 2009 02:38:12 +0000 (-0400) +Subject: [MMC] give Sandisk/Kingston SDHC cards some slack before the SWITCH command +X-Git-Url: http://git.marvell.com/?p=orion.git;a=commitdiff_plain;h=3ea638523747f6d312f11f643a3175c1a4661eec;hp=c0c3df02efed0e5dea9aa4d8313e06e1f68f2cb4 + +[MMC] give Sandisk/Kingston SDHC cards some slack before the SWITCH command + +Without this delay, those cards simply won't work in high speed mode +as the SWITCH command does not succeeds. + +Signed-off-by: Nicolas Pitre <nico@marvell.com> +Tested-by: Martin Michlmayr <tbm@cyrius.com> +--- + +diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c +index cd81c39..ba4c7ab 100644 +--- a/drivers/mmc/core/sd.c ++++ b/drivers/mmc/core/sd.c +@@ -263,6 +263,15 @@ static int mmc_switch_hs(struct mmc_card *card) + return -ENOMEM; + } + ++ /* ++ * Some SDHC cards, notably those with a Sandisk SD controller ++ * (also found in Kingston products) need a bit of slack ++ * before successfully handling the SWITCH command. So far, ++ * cards identifying themselves as "SD04G" and "SD08G" are ++ * affected ++ */ ++ udelay(100); ++ + err = mmc_sd_switch(card, 1, 0, 1, status); + if (err) + goto out; + diff --git a/with-linux-3.4/mvsdio-3.patch b/with-linux-3.4/mvsdio-3.patch new file mode 100644 index 0000000..76e96ce --- /dev/null +++ b/with-linux-3.4/mvsdio-3.patch @@ -0,0 +1,13 @@ +Index: linux-3.4/drivers/mmc/core/core.c +=================================================================== +--- linux-3.4.orig/drivers/mmc/core/core.c 2012-05-27 15:26:08.394167850 -0300 ++++ linux-3.4/drivers/mmc/core/core.c 2012-05-27 15:26:38.085113097 -0300 +@@ -536,7 +536,7 @@ + */ + limit_us = 3000000; + else +- limit_us = 100000; ++ limit_us = 200000; + + /* + * SDHC cards always use these fixed values. diff --git a/with-linux-3.4/phys-virt.diff b/with-linux-3.4/phys-virt.diff new file mode 100644 index 0000000..fc3d43e --- /dev/null +++ b/with-linux-3.4/phys-virt.diff @@ -0,0 +1,14 @@ +Index: linux-3.4/arch/arm/Kconfig +=================================================================== +--- linux-3.4.orig/arch/arm/Kconfig 2012-05-27 17:00:06.244112647 -0300 ++++ linux-3.4/arch/arm/Kconfig 2012-05-27 17:01:06.456038133 -0300 +@@ -235,8 +235,7 @@ + + config PHYS_OFFSET + hex "Physical address of main memory" if MMU +- depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H +- default DRAM_BASE if !MMU ++ default 0x0 + help + Please provide the physical address corresponding to the + location of main memory in your system. diff --git a/with-linux-3.4/series b/with-linux-3.4/series new file mode 100644 index 0000000..c143ea1 --- /dev/null +++ b/with-linux-3.4/series @@ -0,0 +1,8 @@ +dreamplug-3.4.0.patch +mvsdio-1-2.6.30.patch +mvsdio-2.patch +mvsdio-3.patch +linux-3.0-SDIO-micro-AP.patch +0002-Driver-for-Marvell-Libertas-8688-SDIO-micro-AP-suppo-3.2.patch +linux-3.0.4-LIBERTAS-WEXT_PRIV.patch +phys-virt.diff |