summaryrefslogtreecommitdiffstats
path: root/target/device
diff options
context:
space:
mode:
Diffstat (limited to 'target/device')
-rw-r--r--target/device/Atmel/arch-arm/kernel-patches-2.6.24/2.6.24-at91.patch30343
1 files changed, 30343 insertions, 0 deletions
diff --git a/target/device/Atmel/arch-arm/kernel-patches-2.6.24/2.6.24-at91.patch b/target/device/Atmel/arch-arm/kernel-patches-2.6.24/2.6.24-at91.patch
new file mode 100644
index 000000000..803cd265f
--- /dev/null
+++ b/target/device/Atmel/arch-arm/kernel-patches-2.6.24/2.6.24-at91.patch
@@ -0,0 +1,30343 @@
+diff -urN -x CVS linux-2.6.24/MAINTAINERS linux-2.6/MAINTAINERS
+--- linux-2.6.24/MAINTAINERS 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/MAINTAINERS 2008-01-16 13:15:25.000000000 +0200
+@@ -437,7 +437,7 @@
+
+ ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
+ P: Andrew Victor
+-M: andrew@sanpeople.com
++M: linux@maxim.org.za
+ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+ W: http://maxim.org.za/at91_26.html
+ S: Maintained
+diff -urN -x CVS linux-2.6.24/arch/arm/Kconfig linux-2.6/arch/arm/Kconfig
+--- linux-2.6.24/arch/arm/Kconfig 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/Kconfig 2008-02-18 22:56:04.000000000 +0200
+@@ -180,8 +180,8 @@
+ bool "Atmel AT91"
+ select GENERIC_GPIO
+ help
+- This enables support for systems based on the Atmel AT91RM9200
+- and AT91SAM9xxx processors.
++ This enables support for systems based on the Atmel AT91RM9200,
++ AT91SAM9 and AT91CAP9 processors.
+
+ config ARCH_CLPS7500
+ bool "Cirrus CL-PS7500FE"
+@@ -657,6 +657,7 @@
+ default 128 if ARCH_L7200
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410
+ default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
++ default AT91_TIMER_HZ if ARCH_AT91
+ default 100
+
+ config AEABI
+diff -urN -x CVS linux-2.6.24/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6/arch/arm/boot/compressed/head-at91rm9200.S
+--- linux-2.6.24/arch/arm/boot/compressed/head-at91rm9200.S 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/boot/compressed/head-at91rm9200.S 2007-12-31 10:43:35.000000000 +0200
+@@ -67,12 +67,36 @@
+ cmp r7, r3
+ beq 99f
+
++ @ emQbit ECB_AT91 : 1072
++ mov r3, #(MACH_TYPE_ECBAT91 & 0xff)
++ orr r3, r3, #(MACH_TYPE_ECBAT91 & 0xff00)
++ cmp r7, r3
++ beq 99f
++
+ @ Ajeco 1ARM : 1075
+ mov r3, #(MACH_TYPE_ONEARM & 0xff)
+ orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
+ cmp r7, r3
+ beq 99f
+
++ @ Promwad Chub : 1181
++ mov r3, #(MACH_TYPE_CHUB & 0xff)
++ orr r3, r3, #(MACH_TYPE_CHUB & 0xff00)
++ cmp r7, r3
++ beq 99f
++
++ @ Sweda TMS-100: 1277
++ mov r3, #(MACH_TYPE_SWEDATMS & 0xff)
++ orr r3, r3, #(MACH_TYPE_SWEDATMS & 0xff00)
++ cmp r7, r3
++ beq 99f
++
++ @ eQ-3 HomeMatic: 1392
++ mov r3, #(MACH_TYPE_HOMEMATIC & 0xff)
++ orr r3, r3, #(MACH_TYPE_HOMEMATIC & 0xff00)
++ cmp r7, r3
++ beq 99f
++
+ @ Unknown board, use the AT91RM9200DK board
+ @ mov r7, #MACH_TYPE_AT91RM9200
+ mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91cap9adk_defconfig linux-2.6/arch/arm/configs/at91cap9adk_defconfig
+--- linux-2.6.24/arch/arm/configs/at91cap9adk_defconfig 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/configs/at91cap9adk_defconfig 2008-02-18 22:52:04.000000000 +0200
+@@ -0,0 +1,1143 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24-rc8
++# Wed Jan 23 22:55:57 2008
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_GENERIC_TIME is not set
++# CONFIG_GENERIC_CLOCKEVENTS is not set
++CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++
++#
++# Boot options
++#
++
++#
++# Power management
++#
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++CONFIG_ARCH_AT91CAP9=y
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91CAP9 Board Type
++#
++CONFIG_MACH_AT91CAP9ADK=y
++
++#
++# AT91 Board Options
++#
++CONFIG_MTD_AT91_DATAFLASH_CARD=y
++# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
++
++#
++# AT91 Feature Selections
++#
++CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++CONFIG_AT91_TIMER_HZ=100
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++# CONFIG_ARM_THUMB is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_LEDS=y
++CONFIG_LEDS_TIMER=y
++CONFIG_LEDS_CPU=y
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++CONFIG_SUSPEND_UP_POSSIBLE=y
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++CONFIG_IP_PNP_BOOTP=y
++CONFIG_IP_PNP_RARP=y
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0x0
++CONFIG_MTD_PHYSMAP_LEN=0x0
++CONFIG_MTD_PHYSMAP_BANKWIDTH=0
++# CONFIG_MTD_ARM_INTEGRATOR is not set
++# CONFIG_MTD_IMPA7 is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_AT91=y
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=8192
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=y
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_MACB=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_ADS7846=y
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_UCB1400 is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_GPIO is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++CONFIG_LOGO=y
++# CONFIG_LOGO_LINUX_MONO is not set
++CONFIG_LOGO_LINUX_VGA16=y
++# CONFIG_LOGO_LINUX_CLUT224 is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++CONFIG_HID_DEBUG=y
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
++#
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++
++#
++# USB Serial Converter support
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++
++#
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
++#
++# CONFIG_USB_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_AT91=y
++# CONFIG_MMC_SPI is not set
++# CONFIG_NEW_LEDS is not set
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++# CONFIG_MSDOS_FS is not set
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++# CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++CONFIG_DEBUG_USER=y
++# CONFIG_DEBUG_ERRORS is not set
++# CONFIG_DEBUG_LL is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91rm9200dk_defconfig linux-2.6/arch/arm/configs/at91rm9200dk_defconfig
+--- linux-2.6.24/arch/arm/configs/at91rm9200dk_defconfig 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/configs/at91rm9200dk_defconfig 2007-12-31 10:43:35.000000000 +0200
+@@ -620,14 +620,14 @@
+ #
+ # I2C Algorithms
+ #
+-# CONFIG_I2C_ALGOBIT is not set
++CONFIG_I2C_ALGOBIT=y
+ # CONFIG_I2C_ALGOPCF is not set
+ # CONFIG_I2C_ALGOPCA is not set
+
+ #
+ # I2C Hardware Bus support
+ #
+-CONFIG_I2C_AT91=y
++CONFIG_I2C_GPIO=y
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+ # CONFIG_I2C_STUB is not set
+ # CONFIG_I2C_PCA_ISA is not set
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91rm9200ek_defconfig linux-2.6/arch/arm/configs/at91rm9200ek_defconfig
+--- linux-2.6.24/arch/arm/configs/at91rm9200ek_defconfig 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/configs/at91rm9200ek_defconfig 2007-12-31 10:43:35.000000000 +0200
+@@ -594,14 +594,14 @@
+ #
+ # I2C Algorithms
+ #
+-# CONFIG_I2C_ALGOBIT is not set
++CONFIG_I2C_ALGOBIT=y
+ # CONFIG_I2C_ALGOPCF is not set
+ # CONFIG_I2C_ALGOPCA is not set
+
+ #
+ # I2C Hardware Bus support
+ #
+-CONFIG_I2C_AT91=y
++CONFIG_I2C_GPIO=y
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+ # CONFIG_I2C_STUB is not set
+ # CONFIG_I2C_PCA_ISA is not set
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9260ek_defconfig linux-2.6/arch/arm/configs/at91sam9260ek_defconfig
+--- linux-2.6.24/arch/arm/configs/at91sam9260ek_defconfig 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/configs/at91sam9260ek_defconfig 2008-01-08 22:21:02.000000000 +0200
+@@ -1,43 +1,56 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.19-rc6
+-# Fri Nov 17 18:42:21 2006
++# Linux kernel version: 2.6.24-rc7
++# Tue Jan 8 22:20:50 2008
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
+ # CONFIG_GENERIC_TIME is not set
++# CONFIG_GENERIC_CLOCKEVENTS is not set
+ CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
+ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
+ CONFIG_VECTORS_BASE=0xffff0000
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+-# CONFIG_UTS_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+@@ -53,30 +66,30 @@
+ CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_SLAB=y
+ CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+-# CONFIG_SLOB is not set
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+ CONFIG_KMOD=y
+-
+-#
+-# Block layer
+-#
+ CONFIG_BLOCK=y
++# CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+
+ #
+ # IO Schedulers
+@@ -108,12 +121,16 @@
+ # CONFIG_ARCH_NETX is not set
+ # CONFIG_ARCH_H720X is not set
+ # CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
+ # CONFIG_ARCH_IOP32X is not set
+ # CONFIG_ARCH_IOP33X is not set
+-# CONFIG_ARCH_IXP4XX is not set
+-# CONFIG_ARCH_IXP2000 is not set
+ # CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_MXC is not set
+ # CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+@@ -121,29 +138,52 @@
+ # CONFIG_ARCH_S3C2410 is not set
+ # CONFIG_ARCH_SHARK is not set
+ # CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
+ # CONFIG_ARCH_OMAP is not set
+
+ #
++# Boot options
++#
++
++#
++# Power management
++#
++
++#
+ # Atmel AT91 System-on-Chip
+ #
+ # CONFIG_ARCH_AT91RM9200 is not set
+ CONFIG_ARCH_AT91SAM9260=y
+ # CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
++# AT91SAM9260 Variants
++#
++# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+ #
+-# AT91SAM9260 Board Type
++# AT91SAM9260 / AT91SAM9XE Board Type
+ #
+ CONFIG_MACH_AT91SAM9260EK=y
++# CONFIG_MACH_CAM60 is not set
++# CONFIG_MACH_SAM9_L9260 is not set
+
+ #
+ # AT91 Board Options
+ #
++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+ # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+ #
+ # AT91 Feature Selections
+ #
+-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_ATMEL_TCLIB is not set
++CONFIG_AT91_TIMER_HZ=100
+
+ #
+ # Processor Type
+@@ -166,19 +206,19 @@
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+ # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
+
+ #
+ # Bus support
+ #
+-
+-#
+-# PCCARD (PCMCIA/CardBus) support
+-#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+
+ #
+ # Kernel Features
+ #
++# CONFIG_TICK_ONESHOT is not set
+ # CONFIG_PREEMPT is not set
+ # CONFIG_NO_IDLE_HZ is not set
+ CONFIG_HZ=100
+@@ -191,8 +231,12 @@
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+ # CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+
+@@ -203,6 +247,7 @@
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+ # CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+
+ #
+ # Floating point emulation
+@@ -228,7 +273,7 @@
+ # Power management options
+ #
+ # CONFIG_PM is not set
+-# CONFIG_APM is not set
++CONFIG_SUSPEND_UP_POSSIBLE=y
+
+ #
+ # Networking
+@@ -238,13 +283,9 @@
+ #
+ # Networking options
+ #
+-# CONFIG_NETDEBUG is not set
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+ # CONFIG_NET_KEY is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+@@ -263,33 +304,23 @@
+ # CONFIG_INET_IPCOMP is not set
+ # CONFIG_INET_XFRM_TUNNEL is not set
+ # CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
+ # CONFIG_INET6_XFRM_TUNNEL is not set
+ # CONFIG_INET6_TUNNEL is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+-
+-#
+-# DCCP Configuration (EXPERIMENTAL)
+-#
+ # CONFIG_IP_DCCP is not set
+-
+-#
+-# SCTP Configuration (EXPERIMENTAL)
+-#
+ # CONFIG_IP_SCTP is not set
+-
+-#
+-# TIPC Configuration (EXPERIMENTAL)
+-#
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+ # CONFIG_BRIDGE is not set
+@@ -302,10 +333,6 @@
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+
+ #
+@@ -315,7 +342,17 @@
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
+ #
+ # Device Drivers
+@@ -324,34 +361,17 @@
+ #
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+-
+-#
+-# Memory Technology Devices (MTD)
+-#
+ # CONFIG_MTD is not set
+-
+-#
+-# Parallel port support
+-#
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ # CONFIG_BLK_DEV_LOOP is not set
+ # CONFIG_BLK_DEV_NBD is not set
+@@ -360,15 +380,19 @@
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+-CONFIG_BLK_DEV_INITRD=y
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=y
+
+ #
+ # SCSI device support
+ #
+ # CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+ CONFIG_SCSI_PROC_FS=y
+
+@@ -388,6 +412,8 @@
+ CONFIG_SCSI_MULTI_LUN=y
+ # CONFIG_SCSI_CONSTANTS is not set
+ # CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
+
+ #
+ # SCSI Transports
+@@ -395,43 +421,72 @@
+ # CONFIG_SCSI_SPI_ATTRS is not set
+ # CONFIG_SCSI_FC_ATTRS is not set
+ # CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_ATTRS is not set
+ # CONFIG_SCSI_SAS_LIBSAS is not set
+-
+-#
+-# SCSI low-level drivers
+-#
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+ # CONFIG_SCSI_DEBUG is not set
+-
+-#
+-# Multi-device support (RAID and LVM)
+-#
++# CONFIG_ATA is not set
+ # CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_MACB=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++CONFIG_NETDEV_10000=y
+
+ #
+-# Fusion MPT device support
+-#
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-
+-#
+-# I2O device support
++# Wireless LAN
+ #
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
+
+ #
+-# Network device support
++# USB Network Adapters
+ #
+-# CONFIG_NETDEVICES is not set
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+
+ #
+@@ -439,6 +494,7 @@
+ #
+ CONFIG_INPUT=y
+ # CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
+
+ #
+ # Userland interfaces
+@@ -448,7 +504,6 @@
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+ # CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_TSDEV is not set
+ # CONFIG_INPUT_EVDEV is not set
+ # CONFIG_INPUT_EVBUG is not set
+
+@@ -458,6 +513,7 @@
+ # CONFIG_INPUT_KEYBOARD is not set
+ # CONFIG_INPUT_MOUSE is not set
+ # CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
+ # CONFIG_INPUT_TOUCHSCREEN is not set
+ # CONFIG_INPUT_MISC is not set
+
+@@ -492,114 +548,131 @@
+ CONFIG_UNIX98_PTYS=y
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+-
+-#
+-# IPMI
+-#
+ # CONFIG_IPMI_HANDLER is not set
+-
+-#
+-# Watchdog Cards
+-#
+-CONFIG_WATCHDOG=y
+-CONFIG_WATCHDOG_NOWAYOUT=y
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-
+-#
+-# USB-based Watchdog Cards
+-#
+-# CONFIG_USBPCWATCHDOG is not set
+-CONFIG_HW_RANDOM=y
++# CONFIG_HW_RANDOM is not set
+ # CONFIG_NVRAM is not set
+-# CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+-
+-#
+-# Ftape, the floppy tape device driver
+-#
+ # CONFIG_RAW_DRIVER is not set
+-
+-#
+-# TPM devices
+-#
+ # CONFIG_TCG_TPM is not set
+-
+-#
+-# I2C support
+-#
+-# CONFIG_I2C is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=y
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++# CONFIG_I2C_PCA is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+
+ #
+ # SPI support
+ #
+ # CONFIG_SPI is not set
+ # CONFIG_SPI_MASTER is not set
+-
+-#
+-# Dallas's 1-wire bus
+-#
+ # CONFIG_W1 is not set
+-
+-#
+-# Hardware Monitoring support
+-#
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
+-# CONFIG_HWMON_VID is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
+
+ #
+-# Misc devices
++# Watchdog Device Drivers
+ #
+-# CONFIG_TIFM_CORE is not set
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT91SAM9_WATCHDOG=y
+
+ #
+-# LED devices
++# USB-based Watchdog Cards
+ #
+-# CONFIG_NEW_LEDS is not set
++# CONFIG_USBPCWATCHDOG is not set
+
+ #
+-# LED drivers
++# Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+
+ #
+-# LED Triggers
++# Multifunction device drivers
+ #
++# CONFIG_MFD_SM501 is not set
+
+ #
+ # Multimedia devices
+ #
+ # CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
+
+ #
+-# Digital Video Broadcasting Devices
++# Graphics support
+ #
+-# CONFIG_DVB is not set
+-# CONFIG_USB_DABUSB is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+ #
+-# Graphics support
++# Display device support
+ #
+-# CONFIG_FIRMWARE_EDID is not set
+-# CONFIG_FB is not set
++# CONFIG_DISPLAY_SUPPORT is not set
+
+ #
+ # Console display driver support
+ #
+ # CONFIG_VGA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+ #
+ # Sound
+ #
+ # CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
+
+ #
+-# USB support
++# USB Input Devices
++#
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
+ #
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++CONFIG_USB_SUPPORT=y
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+@@ -610,7 +683,7 @@
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
+-# CONFIG_USB_BANDWIDTH is not set
++CONFIG_USB_DEVICE_CLASS=y
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+ # CONFIG_USB_OTG is not set
+
+@@ -619,9 +692,11 @@
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
+
+ #
+ # USB Device Class drivers
+@@ -640,6 +715,7 @@
+ CONFIG_USB_STORAGE_DEBUG=y
+ # CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
+ # CONFIG_USB_STORAGE_DPCM is not set
+ # CONFIG_USB_STORAGE_USBAT is not set
+ # CONFIG_USB_STORAGE_SDDR09 is not set
+@@ -650,43 +726,10 @@
+ # CONFIG_USB_LIBUSUAL is not set
+
+ #
+-# USB Input Devices
+-#
+-# CONFIG_USB_HID is not set
+-
+-#
+-# USB HID Boot Protocol drivers
+-#
+-# CONFIG_USB_KBD is not set
+-# CONFIG_USB_MOUSE is not set
+-# CONFIG_USB_AIPTEK is not set
+-# CONFIG_USB_WACOM is not set
+-# CONFIG_USB_ACECAD is not set
+-# CONFIG_USB_KBTAB is not set
+-# CONFIG_USB_POWERMATE is not set
+-# CONFIG_USB_TOUCHSCREEN is not set
+-# CONFIG_USB_YEALINK is not set
+-# CONFIG_USB_XPAD is not set
+-# CONFIG_USB_ATI_REMOTE is not set
+-# CONFIG_USB_ATI_REMOTE2 is not set
+-# CONFIG_USB_KEYSPAN_REMOTE is not set
+-# CONFIG_USB_APPLETOUCH is not set
+-
+-#
+ # USB Imaging devices
+ #
+ # CONFIG_USB_MDC800 is not set
+ # CONFIG_USB_MICROTEK is not set
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET_MII is not set
+-# CONFIG_USB_USBNET is not set
+ CONFIG_USB_MON=y
+
+ #
+@@ -708,6 +751,7 @@
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
+ # CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+@@ -717,6 +761,7 @@
+ # CONFIG_USB_APPLEDISPLAY is not set
+ # CONFIG_USB_LD is not set
+ # CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+
+ #
+@@ -727,13 +772,19 @@
+ # USB Gadget Support
+ #
+ CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
+ # CONFIG_USB_GADGET_DEBUG_FILES is not set
+ CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
+ # CONFIG_USB_GADGET_NET2280 is not set
+ # CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
+ # CONFIG_USB_GADGET_GOKU is not set
+ # CONFIG_USB_GADGET_LH7A40X is not set
+ # CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
+ CONFIG_USB_GADGET_AT91=y
+ CONFIG_USB_AT91=y
+ # CONFIG_USB_GADGET_DUMMY_HCD is not set
+@@ -745,17 +796,56 @@
+ # CONFIG_USB_FILE_STORAGE_TEST is not set
+ CONFIG_USB_G_SERIAL=m
+ # CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_NEW_LEDS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+
+ #
+-# MMC/SD Card support
++# RTC interfaces
+ #
+-# CONFIG_MMC is not set
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+
+ #
+-# Real Time Clock
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++
++#
++# SPI RTC drivers
+ #
+-CONFIG_RTC_LIB=y
+-# CONFIG_RTC_CLASS is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT91SAM9=y
+
+ #
+ # File systems
+@@ -806,7 +896,6 @@
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_RAMFS=y
+ # CONFIG_CONFIGFS_FS is not set
+
+ #
+@@ -825,10 +914,7 @@
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+ # CONFIG_NFS_FS is not set
+ # CONFIG_NFSD is not set
+ # CONFIG_SMB_FS is not set
+@@ -836,17 +922,12 @@
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+ CONFIG_NLS=y
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
+@@ -887,41 +968,49 @@
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+ # CONFIG_NLS_UTF8 is not set
+-
+-#
+-# Profiling support
+-#
++# CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+
+ #
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ # CONFIG_MAGIC_SYSRQ is not set
+ # CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+-CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_RWSEMS is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_FS is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
+-# CONFIG_HEADERS_CHECK is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
+ CONFIG_DEBUG_USER=y
+ # CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+@@ -932,18 +1021,21 @@
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ # CONFIG_CRYPTO is not set
+
+ #
+ # Library routines
+ #
++CONFIG_BITREVERSE=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9261ek_defconfig linux-2.6/arch/arm/configs/at91sam9261ek_defconfig
+--- linux-2.6.24/arch/arm/configs/at91sam9261ek_defconfig 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/configs/at91sam9261ek_defconfig 2008-01-08 22:21:57.000000000 +0200
+@@ -1,43 +1,56 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.19-rc6
+-# Fri Nov 17 18:00:38 2006
++# Linux kernel version: 2.6.24-rc7
++# Tue Jan 8 22:21:49 2008
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
+ # CONFIG_GENERIC_TIME is not set
++# CONFIG_GENERIC_CLOCKEVENTS is not set
+ CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
+ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
+ CONFIG_VECTORS_BASE=0xffff0000
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+-# CONFIG_UTS_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+@@ -53,30 +66,30 @@
+ CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_SLAB=y
+ CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+-# CONFIG_SLOB is not set
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+ CONFIG_KMOD=y
+-
+-#
+-# Block layer
+-#
+ CONFIG_BLOCK=y
++# CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+
+ #
+ # IO Schedulers
+@@ -108,12 +121,16 @@
+ # CONFIG_ARCH_NETX is not set
+ # CONFIG_ARCH_H720X is not set
+ # CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
+ # CONFIG_ARCH_IOP32X is not set
+ # CONFIG_ARCH_IOP33X is not set
+-# CONFIG_ARCH_IXP4XX is not set
+-# CONFIG_ARCH_IXP2000 is not set
+ # CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_MXC is not set
+ # CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+@@ -121,14 +138,27 @@
+ # CONFIG_ARCH_S3C2410 is not set
+ # CONFIG_ARCH_SHARK is not set
+ # CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
+ # CONFIG_ARCH_OMAP is not set
+
+ #
++# Boot options
++#
++
++#
++# Power management
++#
++
++#
+ # Atmel AT91 System-on-Chip
+ #
+ # CONFIG_ARCH_AT91RM9200 is not set
+ # CONFIG_ARCH_AT91SAM9260 is not set
+ CONFIG_ARCH_AT91SAM9261=y
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
+
+ #
+ # AT91SAM9261 Board Type
+@@ -138,12 +168,15 @@
+ #
+ # AT91 Board Options
+ #
++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+ # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+ #
+ # AT91 Feature Selections
+ #
+-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_ATMEL_TCLIB is not set
++CONFIG_AT91_TIMER_HZ=100
+
+ #
+ # Processor Type
+@@ -166,19 +199,19 @@
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+ # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
+
+ #
+ # Bus support
+ #
+-
+-#
+-# PCCARD (PCMCIA/CardBus) support
+-#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+
+ #
+ # Kernel Features
+ #
++# CONFIG_TICK_ONESHOT is not set
+ # CONFIG_PREEMPT is not set
+ # CONFIG_NO_IDLE_HZ is not set
+ CONFIG_HZ=100
+@@ -191,8 +224,12 @@
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+ # CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+
+@@ -203,6 +240,7 @@
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+ # CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+
+ #
+ # Floating point emulation
+@@ -228,7 +266,7 @@
+ # Power management options
+ #
+ # CONFIG_PM is not set
+-# CONFIG_APM is not set
++CONFIG_SUSPEND_UP_POSSIBLE=y
+
+ #
+ # Networking
+@@ -238,13 +276,13 @@
+ #
+ # Networking options
+ #
+-# CONFIG_NETDEBUG is not set
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+ CONFIG_XFRM=y
+ # CONFIG_XFRM_USER is not set
+ # CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
+ # CONFIG_NET_KEY is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+@@ -266,30 +304,20 @@
+ CONFIG_INET_XFRM_MODE_TRANSPORT=y
+ CONFIG_INET_XFRM_MODE_TUNNEL=y
+ CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+ CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
+ # CONFIG_INET6_XFRM_TUNNEL is not set
+ # CONFIG_INET6_TUNNEL is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+-
+-#
+-# DCCP Configuration (EXPERIMENTAL)
+-#
+ # CONFIG_IP_DCCP is not set
+-
+-#
+-# SCTP Configuration (EXPERIMENTAL)
+-#
+ # CONFIG_IP_SCTP is not set
+-
+-#
+-# TIPC Configuration (EXPERIMENTAL)
+-#
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+ # CONFIG_BRIDGE is not set
+@@ -302,10 +330,6 @@
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+
+ #
+@@ -315,7 +339,17 @@
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
+ #
+ # Device Drivers
+@@ -324,20 +358,14 @@
+ #
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+-
+-#
+-# Memory Technology Devices (MTD)
+-#
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+ # CONFIG_MTD_CONCAT is not set
+@@ -350,12 +378,14 @@
+ # User Modules And Translation Layers
+ #
+ # CONFIG_MTD_CHAR is not set
++CONFIG_MTD_BLKDEVS=y
+ CONFIG_MTD_BLOCK=y
+ # CONFIG_FTL is not set
+ # CONFIG_NFTL is not set
+ # CONFIG_INFTL is not set
+ # CONFIG_RFD_FTL is not set
+ # CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -375,7 +405,6 @@
+ # CONFIG_MTD_RAM is not set
+ # CONFIG_MTD_ROM is not set
+ # CONFIG_MTD_ABSENT is not set
+-# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+ #
+ # Mapping drivers for chip access
+@@ -386,6 +415,8 @@
+ #
+ # Self-contained MTD device drivers
+ #
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+@@ -397,35 +428,24 @@
+ # CONFIG_MTD_DOC2000 is not set
+ # CONFIG_MTD_DOC2001 is not set
+ # CONFIG_MTD_DOC2001PLUS is not set
+-
+-#
+-# NAND Flash Device Drivers
+-#
+ CONFIG_MTD_NAND=y
+ # CONFIG_MTD_NAND_VERIFY_WRITE is not set
+ # CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+ CONFIG_MTD_NAND_IDS=y
+ # CONFIG_MTD_NAND_DISKONCHIP is not set
+ CONFIG_MTD_NAND_AT91=y
+ # CONFIG_MTD_NAND_NANDSIM is not set
+-
+-#
+-# OneNAND Flash Device Drivers
+-#
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
+ # CONFIG_MTD_ONENAND is not set
+
+ #
+-# Parallel port support
++# UBI - Unsorted block images
+ #
++# CONFIG_MTD_UBI is not set
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ # CONFIG_BLK_DEV_LOOP is not set
+ # CONFIG_BLK_DEV_NBD is not set
+@@ -434,15 +454,19 @@
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+-CONFIG_BLK_DEV_INITRD=y
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=y
+
+ #
+ # SCSI device support
+ #
+ # CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+ CONFIG_SCSI_PROC_FS=y
+
+@@ -462,6 +486,8 @@
+ CONFIG_SCSI_MULTI_LUN=y
+ # CONFIG_SCSI_CONSTANTS is not set
+ # CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
+
+ #
+ # SCSI Transports
+@@ -469,75 +495,49 @@
+ # CONFIG_SCSI_SPI_ATTRS is not set
+ # CONFIG_SCSI_FC_ATTRS is not set
+ # CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_ATTRS is not set
+ # CONFIG_SCSI_SAS_LIBSAS is not set
+-
+-#
+-# SCSI low-level drivers
+-#
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+ # CONFIG_SCSI_DEBUG is not set
+-
+-#
+-# Multi-device support (RAID and LVM)
+-#
++# CONFIG_ATA is not set
+ # CONFIG_MD is not set
+-
+-#
+-# Fusion MPT device support
+-#
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-
+-#
+-# I2O device support
+-#
+-
+-#
+-# Network device support
+-#
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ # CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+ # CONFIG_TUN is not set
+-
+-#
+-# PHY device support
+-#
++# CONFIG_VETH is not set
+ # CONFIG_PHYLIB is not set
+-
+-#
+-# Ethernet (10 or 100Mbit)
+-#
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MII=y
++# CONFIG_AX88796 is not set
+ # CONFIG_SMC91X is not set
+ CONFIG_DM9000=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
+
+ #
+-# Ethernet (1000 Mbit)
+-#
+-
+-#
+-# Ethernet (10000 Mbit)
+-#
+-
+-#
+-# Token Ring devices
++# Wireless LAN
+ #
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
+
+ #
+-# Wireless LAN (non-hamradio)
+-#
+-# CONFIG_NET_RADIO is not set
+-
+-#
+-# Wan interfaces
++# USB Network Adapters
+ #
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
+@@ -545,10 +545,6 @@
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+
+ #
+@@ -556,6 +552,7 @@
+ #
+ CONFIG_INPUT=y
+ # CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
+
+ #
+ # Userland interfaces
+@@ -565,23 +562,43 @@
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+ # CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_TSDEV is not set
+ # CONFIG_INPUT_EVDEV is not set
+ # CONFIG_INPUT_EVBUG is not set
+
+ #
+ # Input Device Drivers
+ #
+-# CONFIG_INPUT_KEYBOARD is not set
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=y
+ # CONFIG_INPUT_MOUSE is not set
+ # CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_TABLET is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_ADS7846=y
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_UCB1400 is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+ # CONFIG_INPUT_MISC is not set
+
+ #
+ # Hardware I/O ports
+ #
+-# CONFIG_SERIO is not set
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_RAW is not set
+ # CONFIG_GAMEPORT is not set
+
+ #
+@@ -609,75 +626,47 @@
+ CONFIG_UNIX98_PTYS=y
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+-
+-#
+-# IPMI
+-#
+ # CONFIG_IPMI_HANDLER is not set
+-
+-#
+-# Watchdog Cards
+-#
+-CONFIG_WATCHDOG=y
+-CONFIG_WATCHDOG_NOWAYOUT=y
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-
+-#
+-# USB-based Watchdog Cards
+-#
+-# CONFIG_USBPCWATCHDOG is not set
+ CONFIG_HW_RANDOM=y
+ # CONFIG_NVRAM is not set
+-# CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+-
+-#
+-# Ftape, the floppy tape device driver
+-#
+ # CONFIG_RAW_DRIVER is not set
+-
+-#
+-# TPM devices
+-#
+ # CONFIG_TCG_TPM is not set
+-
+-#
+-# I2C support
+-#
+ CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
+ CONFIG_I2C_CHARDEV=y
+
+ #
+ # I2C Algorithms
+ #
+-# CONFIG_I2C_ALGOBIT is not set
++CONFIG_I2C_ALGOBIT=y
+ # CONFIG_I2C_ALGOPCF is not set
+ # CONFIG_I2C_ALGOPCA is not set
+
+ #
+ # I2C Hardware Bus support
+ #
+-CONFIG_I2C_AT91=y
++CONFIG_I2C_GPIO=y
+ # CONFIG_I2C_OCORES is not set
+ # CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
+ # CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
+ # CONFIG_I2C_PCA is not set
+-# CONFIG_I2C_PCA_ISA is not set
+
+ #
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_SENSORS_DS1337 is not set
+ # CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
+ # CONFIG_SENSORS_EEPROM is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_SENSORS_PCA9539 is not set
+ # CONFIG_SENSORS_PCF8591 is not set
+ # CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
+ # CONFIG_I2C_DEBUG_CORE is not set
+ # CONFIG_I2C_DEBUG_ALGO is not set
+ # CONFIG_I2C_DEBUG_BUS is not set
+@@ -686,70 +675,125 @@
+ #
+ # SPI support
+ #
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
+
+ #
+-# Dallas's 1-wire bus
++# SPI Master Controller Drivers
+ #
+-# CONFIG_W1 is not set
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
+
+ #
+-# Hardware Monitoring support
++# SPI Protocol Masters
+ #
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
+-# CONFIG_HWMON_VID is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
+
+ #
+-# Misc devices
++# Watchdog Device Drivers
+ #
+-# CONFIG_TIFM_CORE is not set
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT91SAM9_WATCHDOG=y
+
+ #
+-# LED devices
++# USB-based Watchdog Cards
+ #
+-# CONFIG_NEW_LEDS is not set
++# CONFIG_USBPCWATCHDOG is not set
+
+ #
+-# LED drivers
++# Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+
+ #
+-# LED Triggers
++# Multifunction device drivers
+ #
++# CONFIG_MFD_SM501 is not set
+
+ #
+ # Multimedia devices
+ #
+ # CONFIG_VIDEO_DEV is not set
+-
+-#
+-# Digital Video Broadcasting Devices
+-#
+-# CONFIG_DVB is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
+ # CONFIG_USB_DABUSB is not set
+
+ #
+ # Graphics support
+ #
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
+ # CONFIG_FIRMWARE_EDID is not set
+-# CONFIG_FB is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D15605 is not set
++# CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
++# CONFIG_FB_INTSRAM is not set
++# CONFIG_FB_ATMEL_STN is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
+
+ #
+ # Console display driver support
+ #
+ # CONFIG_VGA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
+
+ #
+ # Sound
+ #
+ # CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
+
+ #
+-# USB support
++# USB Input Devices
+ #
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
++#
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++CONFIG_USB_SUPPORT=y
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+@@ -760,7 +804,7 @@
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
+-# CONFIG_USB_BANDWIDTH is not set
++CONFIG_USB_DEVICE_CLASS=y
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+ # CONFIG_USB_OTG is not set
+
+@@ -769,9 +813,11 @@
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
+
+ #
+ # USB Device Class drivers
+@@ -790,6 +836,7 @@
+ CONFIG_USB_STORAGE_DEBUG=y
+ # CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
+ # CONFIG_USB_STORAGE_DPCM is not set
+ # CONFIG_USB_STORAGE_USBAT is not set
+ # CONFIG_USB_STORAGE_SDDR09 is not set
+@@ -800,43 +847,10 @@
+ # CONFIG_USB_LIBUSUAL is not set
+
+ #
+-# USB Input Devices
+-#
+-# CONFIG_USB_HID is not set
+-
+-#
+-# USB HID Boot Protocol drivers
+-#
+-# CONFIG_USB_KBD is not set
+-# CONFIG_USB_MOUSE is not set
+-# CONFIG_USB_AIPTEK is not set
+-# CONFIG_USB_WACOM is not set
+-# CONFIG_USB_ACECAD is not set
+-# CONFIG_USB_KBTAB is not set
+-# CONFIG_USB_POWERMATE is not set
+-# CONFIG_USB_TOUCHSCREEN is not set
+-# CONFIG_USB_YEALINK is not set
+-# CONFIG_USB_XPAD is not set
+-# CONFIG_USB_ATI_REMOTE is not set
+-# CONFIG_USB_ATI_REMOTE2 is not set
+-# CONFIG_USB_KEYSPAN_REMOTE is not set
+-# CONFIG_USB_APPLETOUCH is not set
+-
+-#
+ # USB Imaging devices
+ #
+ # CONFIG_USB_MDC800 is not set
+ # CONFIG_USB_MICROTEK is not set
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET_MII is not set
+-# CONFIG_USB_USBNET is not set
+ CONFIG_USB_MON=y
+
+ #
+@@ -858,6 +872,7 @@
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
+ # CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+@@ -867,6 +882,7 @@
+ # CONFIG_USB_APPLEDISPLAY is not set
+ # CONFIG_USB_LD is not set
+ # CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+
+ #
+@@ -877,13 +893,19 @@
+ # USB Gadget Support
+ #
+ CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
+ # CONFIG_USB_GADGET_DEBUG_FILES is not set
+ CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
+ # CONFIG_USB_GADGET_NET2280 is not set
+ # CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
+ # CONFIG_USB_GADGET_GOKU is not set
+ # CONFIG_USB_GADGET_LH7A40X is not set
+ # CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
+ CONFIG_USB_GADGET_AT91=y
+ CONFIG_USB_AT91=y
+ # CONFIG_USB_GADGET_DUMMY_HCD is not set
+@@ -895,21 +917,73 @@
+ # CONFIG_USB_FILE_STORAGE_TEST is not set
+ CONFIG_USB_G_SERIAL=m
+ # CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
+
+ #
+-# MMC/SD Card support
++# MMC/SD Card Drivers
+ #
+-CONFIG_MMC=y
+-# CONFIG_MMC_DEBUG is not set
+ CONFIG_MMC_BLOCK=y
+-CONFIG_MMC_AT91=m
+-# CONFIG_MMC_TIFM_SD is not set
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
+
+ #
+-# Real Time Clock
++# MMC/SD Host Controller Drivers
+ #
++CONFIG_MMC_AT91=y
++# CONFIG_MMC_SPI is not set
++# CONFIG_NEW_LEDS is not set
+ CONFIG_RTC_LIB=y
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT91SAM9=y
+
+ #
+ # File systems
+@@ -960,7 +1034,6 @@
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_RAMFS=y
+ # CONFIG_CONFIGFS_FS is not set
+
+ #
+@@ -973,7 +1046,6 @@
+ # CONFIG_BEFS_FS is not set
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
+-# CONFIG_JFFS_FS is not set
+ # CONFIG_JFFS2_FS is not set
+ CONFIG_CRAMFS=y
+ # CONFIG_VXFS_FS is not set
+@@ -981,10 +1053,7 @@
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+ # CONFIG_NFS_FS is not set
+ # CONFIG_NFSD is not set
+ # CONFIG_SMB_FS is not set
+@@ -992,17 +1061,12 @@
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+ CONFIG_NLS=y
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
+@@ -1043,41 +1107,49 @@
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+ # CONFIG_NLS_UTF8 is not set
+-
+-#
+-# Profiling support
+-#
++# CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+
+ #
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ # CONFIG_MAGIC_SYSRQ is not set
+ # CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+-CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_RWSEMS is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_FS is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
+-# CONFIG_HEADERS_CHECK is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
+ CONFIG_DEBUG_USER=y
+ # CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+@@ -1088,18 +1160,21 @@
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ # CONFIG_CRYPTO is not set
+
+ #
+ # Library routines
+ #
++CONFIG_BITREVERSE=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9263ek_defconfig linux-2.6/arch/arm/configs/at91sam9263ek_defconfig
+--- linux-2.6.24/arch/arm/configs/at91sam9263ek_defconfig 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/configs/at91sam9263ek_defconfig 2008-01-08 22:12:41.000000000 +0200
+@@ -1,12 +1,18 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.20-rc1
+-# Mon Jan 8 16:06:54 2007
++# Linux kernel version: 2.6.24-rc7
++# Tue Jan 8 22:12:20 2008
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
+ # CONFIG_GENERIC_TIME is not set
++# CONFIG_GENERIC_CLOCKEVENTS is not set
+ CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
+ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+@@ -15,32 +21,36 @@
+ # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+ CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
+ CONFIG_VECTORS_BASE=0xffff0000
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+-# CONFIG_UTS_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SYSCTL=y
+@@ -56,32 +66,30 @@
+ CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_SLAB=y
+ CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+-# CONFIG_SLOB is not set
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+ CONFIG_KMOD=y
+-
+-#
+-# Block layer
+-#
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+
+ #
+ # IO Schedulers
+@@ -113,13 +121,16 @@
+ # CONFIG_ARCH_NETX is not set
+ # CONFIG_ARCH_H720X is not set
+ # CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
+ # CONFIG_ARCH_IOP32X is not set
+ # CONFIG_ARCH_IOP33X is not set
+-# CONFIG_ARCH_IOP13XX is not set
+-# CONFIG_ARCH_IXP4XX is not set
+-# CONFIG_ARCH_IXP2000 is not set
+ # CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_MXC is not set
+ # CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+@@ -127,15 +138,27 @@
+ # CONFIG_ARCH_S3C2410 is not set
+ # CONFIG_ARCH_SHARK is not set
+ # CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
+ # CONFIG_ARCH_OMAP is not set
+
+ #
++# Boot options
++#
++
++#
++# Power management
++#
++
++#
+ # Atmel AT91 System-on-Chip
+ #
+ # CONFIG_ARCH_AT91RM9200 is not set
+ # CONFIG_ARCH_AT91SAM9260 is not set
+ # CONFIG_ARCH_AT91SAM9261 is not set
+ CONFIG_ARCH_AT91SAM9263=y
++# CONFIG_ARCH_AT91SAM9RL is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
+
+ #
+ # AT91SAM9263 Board Type
+@@ -152,6 +175,8 @@
+ # AT91 Feature Selections
+ #
+ # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
++CONFIG_AT91_TIMER_HZ=100
+
+ #
+ # Processor Type
+@@ -174,19 +199,19 @@
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+ # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
+
+ #
+ # Bus support
+ #
+-
+-#
+-# PCCARD (PCMCIA/CardBus) support
+-#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+
+ #
+ # Kernel Features
+ #
++# CONFIG_TICK_ONESHOT is not set
+ # CONFIG_PREEMPT is not set
+ # CONFIG_NO_IDLE_HZ is not set
+ CONFIG_HZ=100
+@@ -199,8 +224,12 @@
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+ # CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+
+@@ -211,6 +240,7 @@
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+ # CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+
+ #
+ # Floating point emulation
+@@ -236,7 +266,7 @@
+ # Power management options
+ #
+ # CONFIG_PM is not set
+-# CONFIG_APM is not set
++CONFIG_SUSPEND_UP_POSSIBLE=y
+
+ #
+ # Networking
+@@ -246,7 +276,6 @@
+ #
+ # Networking options
+ #
+-# CONFIG_NETDEBUG is not set
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
+@@ -271,6 +300,7 @@
+ # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+ # CONFIG_INET_XFRM_MODE_TUNNEL is not set
+ # CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
+ # CONFIG_INET_DIAG is not set
+ # CONFIG_TCP_CONG_ADVANCED is not set
+ CONFIG_TCP_CONG_CUBIC=y
+@@ -281,20 +311,8 @@
+ # CONFIG_INET6_TUNNEL is not set
+ # CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+-
+-#
+-# DCCP Configuration (EXPERIMENTAL)
+-#
+ # CONFIG_IP_DCCP is not set
+-
+-#
+-# SCTP Configuration (EXPERIMENTAL)
+-#
+ # CONFIG_IP_SCTP is not set
+-
+-#
+-# TIPC Configuration (EXPERIMENTAL)
+-#
+ # CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+ # CONFIG_BRIDGE is not set
+@@ -307,10 +325,6 @@
+ # CONFIG_LAPB is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+
+ #
+@@ -320,7 +334,17 @@
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
+ #
+ # Device Drivers
+@@ -329,20 +353,14 @@
+ #
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+-
+-#
+-# Memory Technology Devices (MTD)
+-#
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+ # CONFIG_MTD_CONCAT is not set
+@@ -362,6 +380,7 @@
+ # CONFIG_INFTL is not set
+ # CONFIG_RFD_FTL is not set
+ # CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -381,7 +400,6 @@
+ # CONFIG_MTD_RAM is not set
+ # CONFIG_MTD_ROM is not set
+ # CONFIG_MTD_ABSENT is not set
+-# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+ #
+ # Mapping drivers for chip access
+@@ -405,35 +423,24 @@
+ # CONFIG_MTD_DOC2000 is not set
+ # CONFIG_MTD_DOC2001 is not set
+ # CONFIG_MTD_DOC2001PLUS is not set
+-
+-#
+-# NAND Flash Device Drivers
+-#
+ CONFIG_MTD_NAND=y
+ # CONFIG_MTD_NAND_VERIFY_WRITE is not set
+ # CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+ CONFIG_MTD_NAND_IDS=y
+ # CONFIG_MTD_NAND_DISKONCHIP is not set
+ CONFIG_MTD_NAND_AT91=y
+ # CONFIG_MTD_NAND_NANDSIM is not set
+-
+-#
+-# OneNAND Flash Device Drivers
+-#
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
+ # CONFIG_MTD_ONENAND is not set
+
+ #
+-# Parallel port support
++# UBI - Unsorted block images
+ #
++# CONFIG_MTD_UBI is not set
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -443,15 +450,18 @@
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+-CONFIG_BLK_DEV_INITRD=y
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=y
+
+ #
+ # SCSI device support
+ #
+ # CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
+ # CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+ CONFIG_SCSI_PROC_FS=y
+@@ -473,6 +483,7 @@
+ # CONFIG_SCSI_CONSTANTS is not set
+ # CONFIG_SCSI_LOGGING is not set
+ # CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
+
+ #
+ # SCSI Transports
+@@ -480,80 +491,65 @@
+ # CONFIG_SCSI_SPI_ATTRS is not set
+ # CONFIG_SCSI_FC_ATTRS is not set
+ # CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_ATTRS is not set
+ # CONFIG_SCSI_SAS_LIBSAS is not set
+-
+-#
+-# SCSI low-level drivers
+-#
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+ # CONFIG_SCSI_DEBUG is not set
+-
+-#
+-# Serial ATA (prod) and Parallel ATA (experimental) drivers
+-#
+ # CONFIG_ATA is not set
+-
+-#
+-# Multi-device support (RAID and LVM)
+-#
+ # CONFIG_MD is not set
+-
+-#
+-# Fusion MPT device support
+-#
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-
+-#
+-# I2O device support
+-#
+-
+-#
+-# Network device support
+-#
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ # CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+ # CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
+
+ #
+-# PHY device support
+-#
+-# CONFIG_PHYLIB is not set
+-
+-#
+-# Ethernet (10 or 100Mbit)
++# MII PHY device drivers
+ #
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MII=y
++CONFIG_MACB=y
++# CONFIG_AX88796 is not set
+ # CONFIG_SMC91X is not set
+ # CONFIG_DM9000 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++CONFIG_NETDEV_10000=y
+
+ #
+-# Ethernet (1000 Mbit)
+-#
+-
+-#
+-# Ethernet (10000 Mbit)
+-#
+-
+-#
+-# Token Ring devices
+-#
+-
+-#
+-# Wireless LAN (non-hamradio)
++# Wireless LAN
+ #
+-# CONFIG_NET_RADIO is not set
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
+
+ #
+-# Wan interfaces
++# USB Network Adapters
+ #
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
+@@ -561,10 +557,6 @@
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+
+ #
+@@ -572,6 +564,7 @@
+ #
+ CONFIG_INPUT=y
+ # CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
+
+ #
+ # Userland interfaces
+@@ -581,20 +574,26 @@
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+ # CONFIG_INPUT_JOYDEV is not set
+-CONFIG_INPUT_TSDEV=y
+-CONFIG_INPUT_TSDEV_SCREEN_X=240
+-CONFIG_INPUT_TSDEV_SCREEN_Y=320
+ CONFIG_INPUT_EVDEV=y
+ # CONFIG_INPUT_EVBUG is not set
+
+ #
+ # Input Device Drivers
+ #
+-# CONFIG_INPUT_KEYBOARD is not set
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=y
+ # CONFIG_INPUT_MOUSE is not set
+ # CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
+ CONFIG_INPUT_TOUCHSCREEN=y
+ CONFIG_TOUCHSCREEN_ADS7846=y
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
+ # CONFIG_TOUCHSCREEN_GUNZE is not set
+ # CONFIG_TOUCHSCREEN_ELO is not set
+ # CONFIG_TOUCHSCREEN_MTOUCH is not set
+@@ -603,6 +602,7 @@
+ # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+ # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+ # CONFIG_TOUCHSCREEN_UCB1400 is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+ # CONFIG_INPUT_MISC is not set
+
+ #
+@@ -636,71 +636,47 @@
+ CONFIG_UNIX98_PTYS=y
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+-
+-#
+-# IPMI
+-#
+ # CONFIG_IPMI_HANDLER is not set
+-
+-#
+-# Watchdog Cards
+-#
+-CONFIG_WATCHDOG=y
+-CONFIG_WATCHDOG_NOWAYOUT=y
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-
+-#
+-# USB-based Watchdog Cards
+-#
+-# CONFIG_USBPCWATCHDOG is not set
+ CONFIG_HW_RANDOM=y
+ # CONFIG_NVRAM is not set
+-# CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
+-
+-#
+-# TPM devices
+-#
+ # CONFIG_TCG_TPM is not set
+-
+-#
+-# I2C support
+-#
+ CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
+ CONFIG_I2C_CHARDEV=y
+
+ #
+ # I2C Algorithms
+ #
+-# CONFIG_I2C_ALGOBIT is not set
++CONFIG_I2C_ALGOBIT=y
+ # CONFIG_I2C_ALGOPCF is not set
+ # CONFIG_I2C_ALGOPCA is not set
+
+ #
+ # I2C Hardware Bus support
+ #
+-CONFIG_I2C_AT91=y
++CONFIG_I2C_GPIO=y
+ # CONFIG_I2C_OCORES is not set
+ # CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
+ # CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
+ # CONFIG_I2C_PCA is not set
+-# CONFIG_I2C_PCA_ISA is not set
+
+ #
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_SENSORS_DS1337 is not set
+ # CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
+ # CONFIG_SENSORS_EEPROM is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_SENSORS_PCA9539 is not set
+ # CONFIG_SENSORS_PCF8591 is not set
+ # CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
+ # CONFIG_I2C_DEBUG_CORE is not set
+ # CONFIG_I2C_DEBUG_ALGO is not set
+ # CONFIG_I2C_DEBUG_BUS is not set
+@@ -722,61 +698,80 @@
+ #
+ # SPI Protocol Masters
+ #
+-
+-#
+-# Dallas's 1-wire bus
+-#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
+ # CONFIG_W1 is not set
+-
+-#
+-# Hardware Monitoring support
+-#
++# CONFIG_POWER_SUPPLY is not set
+ # CONFIG_HWMON is not set
+-# CONFIG_HWMON_VID is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
+
+ #
+-# Misc devices
++# Watchdog Device Drivers
+ #
+-# CONFIG_TIFM_CORE is not set
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT91SAM9_WATCHDOG=y
+
+ #
+-# LED devices
++# USB-based Watchdog Cards
+ #
+-# CONFIG_NEW_LEDS is not set
++# CONFIG_USBPCWATCHDOG is not set
+
+ #
+-# LED drivers
++# Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+
+ #
+-# LED Triggers
++# Multifunction device drivers
+ #
++# CONFIG_MFD_SM501 is not set
+
+ #
+ # Multimedia devices
+ #
+ # CONFIG_VIDEO_DEV is not set
+-
+-#
+-# Digital Video Broadcasting Devices
+-#
+-# CONFIG_DVB is not set
+-# CONFIG_USB_DABUSB is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
+
+ #
+ # Graphics support
+ #
+-# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+ CONFIG_FB=y
+-# CONFIG_FB_CFB_FILLRECT is not set
+-# CONFIG_FB_CFB_COPYAREA is not set
+-# CONFIG_FB_CFB_IMAGEBLIT is not set
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
++# CONFIG_FB_SVGALIB is not set
+ # CONFIG_FB_MACMODES is not set
+ # CONFIG_FB_BACKLIGHT is not set
+ # CONFIG_FB_MODE_HELPERS is not set
+ # CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D15605 is not set
+ # CONFIG_FB_S1D13XXX is not set
++CONFIG_FB_ATMEL=y
+ # CONFIG_FB_VIRTUAL is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
+
+ #
+ # Console display driver support
+@@ -784,26 +779,28 @@
+ # CONFIG_VGA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
+ # CONFIG_FRAMEBUFFER_CONSOLE is not set
+-
+-#
+-# Logo configuration
+-#
+ # CONFIG_LOGO is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+ #
+ # Sound
+ #
+ # CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
+
+ #
+-# HID Devices
++# USB Input Devices
+ #
+-CONFIG_HID=y
++# CONFIG_USB_HID is not set
+
+ #
+-# USB support
++# USB HID Boot Protocol drivers
+ #
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++CONFIG_USB_SUPPORT=y
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
+ # CONFIG_USB_ARCH_HAS_EHCI is not set
+@@ -814,9 +811,8 @@
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
+-# CONFIG_USB_BANDWIDTH is not set
++CONFIG_USB_DEVICE_CLASS=y
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_MULTITHREAD_PROBE is not set
+ # CONFIG_USB_OTG is not set
+
+ #
+@@ -824,9 +820,11 @@
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
+
+ #
+ # USB Device Class drivers
+@@ -845,6 +843,7 @@
+ # CONFIG_USB_STORAGE_DEBUG is not set
+ # CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
+ # CONFIG_USB_STORAGE_DPCM is not set
+ # CONFIG_USB_STORAGE_USBAT is not set
+ # CONFIG_USB_STORAGE_SDDR09 is not set
+@@ -856,43 +855,10 @@
+ # CONFIG_USB_LIBUSUAL is not set
+
+ #
+-# USB Input Devices
+-#
+-# CONFIG_USB_HID is not set
+-
+-#
+-# USB HID Boot Protocol drivers
+-#
+-# CONFIG_USB_KBD is not set
+-# CONFIG_USB_MOUSE is not set
+-# CONFIG_USB_AIPTEK is not set
+-# CONFIG_USB_WACOM is not set
+-# CONFIG_USB_ACECAD is not set
+-# CONFIG_USB_KBTAB is not set
+-# CONFIG_USB_POWERMATE is not set
+-# CONFIG_USB_TOUCHSCREEN is not set
+-# CONFIG_USB_YEALINK is not set
+-# CONFIG_USB_XPAD is not set
+-# CONFIG_USB_ATI_REMOTE is not set
+-# CONFIG_USB_ATI_REMOTE2 is not set
+-# CONFIG_USB_KEYSPAN_REMOTE is not set
+-# CONFIG_USB_APPLETOUCH is not set
+-
+-#
+ # USB Imaging devices
+ #
+ # CONFIG_USB_MDC800 is not set
+ # CONFIG_USB_MICROTEK is not set
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET_MII is not set
+-# CONFIG_USB_USBNET is not set
+ CONFIG_USB_MON=y
+
+ #
+@@ -914,6 +880,7 @@
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
+ # CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+@@ -923,6 +890,7 @@
+ # CONFIG_USB_APPLEDISPLAY is not set
+ # CONFIG_USB_LD is not set
+ # CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+
+ #
+@@ -933,13 +901,19 @@
+ # USB Gadget Support
+ #
+ CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
+ # CONFIG_USB_GADGET_DEBUG_FILES is not set
+ CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
+ # CONFIG_USB_GADGET_NET2280 is not set
+ # CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
+ # CONFIG_USB_GADGET_GOKU is not set
+ # CONFIG_USB_GADGET_LH7A40X is not set
+ # CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
+ CONFIG_USB_GADGET_AT91=y
+ CONFIG_USB_AT91=y
+ # CONFIG_USB_GADGET_DUMMY_HCD is not set
+@@ -951,21 +925,73 @@
+ # CONFIG_USB_FILE_STORAGE_TEST is not set
+ CONFIG_USB_G_SERIAL=m
+ # CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
+
+ #
+-# MMC/SD Card support
++# MMC/SD Card Drivers
+ #
+-CONFIG_MMC=y
+-# CONFIG_MMC_DEBUG is not set
+ CONFIG_MMC_BLOCK=y
+-CONFIG_MMC_AT91=m
+-# CONFIG_MMC_TIFM_SD is not set
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
+
+ #
+-# Real Time Clock
++# MMC/SD Host Controller Drivers
+ #
++CONFIG_MMC_AT91=m
++# CONFIG_MMC_SPI is not set
++# CONFIG_NEW_LEDS is not set
+ CONFIG_RTC_LIB=y
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT91SAM9=y
+
+ #
+ # File systems
+@@ -1016,7 +1042,6 @@
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_RAMFS=y
+ # CONFIG_CONFIGFS_FS is not set
+
+ #
+@@ -1032,10 +1057,12 @@
+ CONFIG_JFFS2_FS=y
+ CONFIG_JFFS2_FS_DEBUG=0
+ CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+ # CONFIG_JFFS2_SUMMARY is not set
+ # CONFIG_JFFS2_FS_XATTR is not set
+ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+ CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
+ CONFIG_JFFS2_RTIME=y
+ # CONFIG_JFFS2_RUBIN is not set
+ CONFIG_CRAMFS=y
+@@ -1044,10 +1071,7 @@
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ # CONFIG_NFS_V3 is not set
+ # CONFIG_NFS_V4 is not set
+@@ -1057,6 +1081,7 @@
+ CONFIG_LOCKD=y
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
+ # CONFIG_RPCSEC_GSS_KRB5 is not set
+ # CONFIG_RPCSEC_GSS_SPKM3 is not set
+ # CONFIG_SMB_FS is not set
+@@ -1064,17 +1089,12 @@
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+ CONFIG_NLS=y
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
+@@ -1115,36 +1135,35 @@
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+ # CONFIG_NLS_UTF8 is not set
+-
+-#
+-# Distributed Lock Manager
+-#
+ # CONFIG_DLM is not set
+-
+-#
+-# Profiling support
+-#
++CONFIG_INSTRUMENTATION=y
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+
+ #
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ # CONFIG_MAGIC_SYSRQ is not set
+ # CONFIG_UNUSED_SYMBOLS is not set
+ # CONFIG_DEBUG_FS is not set
+ # CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+-CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+ # CONFIG_DEBUG_RT_MUTEXES is not set
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_RWSEMS is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+@@ -1152,9 +1171,13 @@
+ # CONFIG_DEBUG_INFO is not set
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
+ CONFIG_DEBUG_USER=y
+ # CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+@@ -1165,10 +1188,7 @@
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ # CONFIG_CRYPTO is not set
+
+ #
+@@ -1177,8 +1197,13 @@
+ CONFIG_BITREVERSE=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
+ CONFIG_PLIST=y
+-CONFIG_IOMAP_COPY=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/at91sam9rlek_defconfig linux-2.6/arch/arm/configs/at91sam9rlek_defconfig
+--- linux-2.6.24/arch/arm/configs/at91sam9rlek_defconfig 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/configs/at91sam9rlek_defconfig 2008-01-08 22:24:22.000000000 +0200
+@@ -1,15 +1,18 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.21
+-# Mon May 7 16:30:40 2007
++# Linux kernel version: 2.6.24-rc7
++# Tue Jan 8 22:24:14 2008
+ #
+ CONFIG_ARM=y
+ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+ CONFIG_GENERIC_GPIO=y
+ # CONFIG_GENERIC_TIME is not set
++# CONFIG_GENERIC_CLOCKEVENTS is not set
+ CONFIG_MMU=y
+ # CONFIG_NO_IOPORT is not set
+ CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
+ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+ CONFIG_HARDIRQS_SW_RESEND=y
+ CONFIG_GENERIC_IRQ_PROBE=y
+@@ -23,27 +26,28 @@
+ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
+-# CONFIG_IPC_NS is not set
+ CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+ # CONFIG_TASKSTATS is not set
+-# CONFIG_UTS_NS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+ # CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ # CONFIG_RELAY is not set
+ CONFIG_BLK_DEV_INITRD=y
+@@ -62,32 +66,30 @@
+ CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_SLAB=y
+ CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+-# CONFIG_SLOB is not set
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+ CONFIG_KMOD=y
+-
+-#
+-# Block layer
+-#
+ CONFIG_BLOCK=y
+ # CONFIG_LBD is not set
+ # CONFIG_BLK_DEV_IO_TRACE is not set
+ # CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+
+ #
+ # IO Schedulers
+@@ -119,14 +121,16 @@
+ # CONFIG_ARCH_NETX is not set
+ # CONFIG_ARCH_H720X is not set
+ # CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
+ # CONFIG_ARCH_IOP32X is not set
+ # CONFIG_ARCH_IOP33X is not set
+-# CONFIG_ARCH_IOP13XX is not set
+-# CONFIG_ARCH_IXP4XX is not set
+-# CONFIG_ARCH_IXP2000 is not set
+ # CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KS8695 is not set
+ # CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_MXC is not set
+ # CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+@@ -134,9 +138,18 @@
+ # CONFIG_ARCH_S3C2410 is not set
+ # CONFIG_ARCH_SHARK is not set
+ # CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
+ # CONFIG_ARCH_OMAP is not set
+
+ #
++# Boot options
++#
++
++#
++# Power management
++#
++
++#
+ # Atmel AT91 System-on-Chip
+ #
+ # CONFIG_ARCH_AT91RM9200 is not set
+@@ -144,6 +157,8 @@
+ # CONFIG_ARCH_AT91SAM9261 is not set
+ # CONFIG_ARCH_AT91SAM9263 is not set
+ CONFIG_ARCH_AT91SAM9RL=y
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
+
+ #
+ # AT91SAM9RL Board Type
+@@ -157,7 +172,9 @@
+ #
+ # AT91 Feature Selections
+ #
+-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_ATMEL_TCLIB is not set
++CONFIG_AT91_TIMER_HZ=100
+
+ #
+ # Processor Type
+@@ -185,15 +202,14 @@
+ #
+ # Bus support
+ #
+-
+-#
+-# PCCARD (PCMCIA/CardBus) support
+-#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ # CONFIG_PCCARD is not set
+
+ #
+ # Kernel Features
+ #
++# CONFIG_TICK_ONESHOT is not set
+ # CONFIG_PREEMPT is not set
+ # CONFIG_NO_IDLE_HZ is not set
+ CONFIG_HZ=100
+@@ -206,9 +222,12 @@
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
+ # CONFIG_RESOURCES_64BIT is not set
+ CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+
+@@ -245,6 +264,7 @@
+ # Power management options
+ #
+ # CONFIG_PM is not set
++CONFIG_SUSPEND_UP_POSSIBLE=y
+
+ #
+ # Networking
+@@ -254,7 +274,6 @@
+ #
+ # Networking options
+ #
+-# CONFIG_NETDEBUG is not set
+ # CONFIG_PACKET is not set
+ CONFIG_UNIX=y
+ # CONFIG_NET_KEY is not set
+@@ -271,10 +290,6 @@
+ # CONFIG_X25 is not set
+ # CONFIG_LAPB is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+
+ #
+@@ -284,7 +299,16 @@
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
+ #
+ # Device Drivers
+@@ -293,21 +317,14 @@
+ #
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
+ # CONFIG_CONNECTOR is not set
+-
+-#
+-# Memory Technology Devices (MTD)
+-#
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+ CONFIG_MTD_CONCAT=y
+@@ -327,6 +344,7 @@
+ # CONFIG_INFTL is not set
+ # CONFIG_RFD_FTL is not set
+ # CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -346,7 +364,6 @@
+ # CONFIG_MTD_RAM is not set
+ # CONFIG_MTD_ROM is not set
+ # CONFIG_MTD_ABSENT is not set
+-# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+ #
+ # Mapping drivers for chip access
+@@ -370,36 +387,23 @@
+ # CONFIG_MTD_DOC2000 is not set
+ # CONFIG_MTD_DOC2001 is not set
+ # CONFIG_MTD_DOC2001PLUS is not set
+-
+-#
+-# NAND Flash Device Drivers
+-#
+ CONFIG_MTD_NAND=y
+ # CONFIG_MTD_NAND_VERIFY_WRITE is not set
+ # CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+ CONFIG_MTD_NAND_IDS=y
+ # CONFIG_MTD_NAND_DISKONCHIP is not set
+ CONFIG_MTD_NAND_AT91=y
+ # CONFIG_MTD_NAND_NANDSIM is not set
+-
+-#
+-# OneNAND Flash Device Drivers
+-#
++# CONFIG_MTD_NAND_PLATFORM is not set
+ # CONFIG_MTD_ONENAND is not set
+
+ #
+-# Parallel port support
++# UBI - Unsorted block images
+ #
++# CONFIG_MTD_UBI is not set
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-# CONFIG_PNPACPI is not set
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -410,12 +414,16 @@
+ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=y
+
+ #
+ # SCSI device support
+ #
+ # CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
+ # CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+ CONFIG_SCSI_PROC_FS=y
+@@ -437,6 +445,7 @@
+ # CONFIG_SCSI_CONSTANTS is not set
+ # CONFIG_SCSI_LOGGING is not set
+ # CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
+
+ #
+ # SCSI Transports
+@@ -444,47 +453,13 @@
+ # CONFIG_SCSI_SPI_ATTRS is not set
+ # CONFIG_SCSI_FC_ATTRS is not set
+ # CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_ATTRS is not set
+ # CONFIG_SCSI_SAS_LIBSAS is not set
+-
+-#
+-# SCSI low-level drivers
+-#
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_SCSI_DEBUG is not set
+-
+-#
+-# Serial ATA (prod) and Parallel ATA (experimental) drivers
+-#
+ # CONFIG_ATA is not set
+-
+-#
+-# Multi-device support (RAID and LVM)
+-#
+ # CONFIG_MD is not set
+-
+-#
+-# Fusion MPT device support
+-#
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-
+-#
+-# I2O device support
+-#
+-
+-#
+-# Network device support
+-#
+ # CONFIG_NETDEVICES is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+
+ #
+@@ -492,6 +467,7 @@
+ #
+ CONFIG_INPUT=y
+ # CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
+
+ #
+ # Userland interfaces
+@@ -501,7 +477,6 @@
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+ # CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_TSDEV is not set
+ CONFIG_INPUT_EVDEV=y
+ # CONFIG_INPUT_EVBUG is not set
+
+@@ -511,8 +486,10 @@
+ # CONFIG_INPUT_KEYBOARD is not set
+ # CONFIG_INPUT_MOUSE is not set
+ # CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
+ CONFIG_INPUT_TOUCHSCREEN=y
+ # CONFIG_TOUCHSCREEN_ADS7846 is not set
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
+ # CONFIG_TOUCHSCREEN_GUNZE is not set
+ # CONFIG_TOUCHSCREEN_ELO is not set
+ # CONFIG_TOUCHSCREEN_MTOUCH is not set
+@@ -521,6 +498,7 @@
+ # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+ # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+ # CONFIG_TOUCHSCREEN_UCB1400 is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+ # CONFIG_INPUT_MISC is not set
+
+ #
+@@ -554,37 +532,50 @@
+ CONFIG_UNIX98_PTYS=y
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+-
+-#
+-# IPMI
+-#
+ # CONFIG_IPMI_HANDLER is not set
+-
+-#
+-# Watchdog Cards
+-#
+-CONFIG_WATCHDOG=y
+-CONFIG_WATCHDOG_NOWAYOUT=y
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_HW_RANDOM=y
++# CONFIG_HW_RANDOM is not set
+ # CONFIG_NVRAM is not set
+-# CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+ # CONFIG_RAW_DRIVER is not set
+-
+-#
+-# TPM devices
+-#
+ # CONFIG_TCG_TPM is not set
+-
+-#
+-# I2C support
+-#
+-# CONFIG_I2C is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=y
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_PCA is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
+
+ #
+ # SPI support
+@@ -603,21 +594,25 @@
+ # SPI Protocol Masters
+ #
+ # CONFIG_SPI_AT25 is not set
+-
+-#
+-# Dallas's 1-wire bus
+-#
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
+ # CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
+
+ #
+-# Hardware Monitoring support
++# Watchdog Device Drivers
+ #
+-# CONFIG_HWMON is not set
+-# CONFIG_HWMON_VID is not set
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT91SAM9_WATCHDOG=y
+
+ #
+-# Misc devices
++# Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+
+ #
+ # Multifunction device drivers
+@@ -625,37 +620,28 @@
+ # CONFIG_MFD_SM501 is not set
+
+ #
+-# LED devices
+-#
+-# CONFIG_NEW_LEDS is not set
+-
+-#
+-# LED drivers
+-#
+-
+-#
+-# LED Triggers
+-#
+-
+-#
+ # Multimedia devices
+ #
+ # CONFIG_VIDEO_DEV is not set
+-
+-#
+-# Digital Video Broadcasting Devices
+-#
++# CONFIG_DAB is not set
+
+ #
+ # Graphics support
+ #
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+ CONFIG_FB=y
+ # CONFIG_FIRMWARE_EDID is not set
+ # CONFIG_FB_DDC is not set
+ CONFIG_FB_CFB_FILLRECT=y
+ CONFIG_FB_CFB_COPYAREA=y
+ CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_SYS_FOPS is not set
++CONFIG_FB_DEFERRED_IO=y
+ # CONFIG_FB_SVGALIB is not set
+ # CONFIG_FB_MACMODES is not set
+ # CONFIG_FB_BACKLIGHT is not set
+@@ -665,9 +651,16 @@
+ #
+ # Frame buffer hardware drivers
+ #
++# CONFIG_FB_S1D15605 is not set
+ # CONFIG_FB_S1D13XXX is not set
+ CONFIG_FB_ATMEL=y
+ # CONFIG_FB_VIRTUAL is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
+
+ #
+ # Console display driver support
+@@ -675,97 +668,97 @@
+ # CONFIG_VGA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
+ # CONFIG_FRAMEBUFFER_CONSOLE is not set
+-
+-#
+-# Logo configuration
+-#
+ # CONFIG_LOGO is not set
+
+ #
+ # Sound
+ #
+-CONFIG_SOUND=y
+-
+-#
+-# Advanced Linux Sound Architecture
+-#
+-CONFIG_SND=y
+-CONFIG_SND_TIMER=y
+-CONFIG_SND_PCM=y
+-CONFIG_SND_SEQUENCER=y
+-CONFIG_SND_SEQ_DUMMY=y
+-CONFIG_SND_OSSEMUL=y
+-CONFIG_SND_MIXER_OSS=y
+-CONFIG_SND_PCM_OSS=y
+-CONFIG_SND_PCM_OSS_PLUGINS=y
+-CONFIG_SND_SEQUENCER_OSS=y
+-# CONFIG_SND_DYNAMIC_MINORS is not set
+-CONFIG_SND_SUPPORT_OLD_API=y
+-CONFIG_SND_VERBOSE_PROCFS=y
+-CONFIG_SND_VERBOSE_PRINTK=y
+-CONFIG_SND_DEBUG=y
+-CONFIG_SND_DEBUG_DETECT=y
+-# CONFIG_SND_PCM_XRUN_DEBUG is not set
+-
+-#
+-# Generic devices
+-#
+-# CONFIG_SND_DUMMY is not set
+-# CONFIG_SND_VIRMIDI is not set
+-# CONFIG_SND_MTPAV is not set
+-# CONFIG_SND_SERIAL_U16550 is not set
+-# CONFIG_SND_MPU401 is not set
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++# CONFIG_USB is not set
+
+ #
+-# ALSA ARM devices
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
+
+ #
+-# SoC audio support
++# USB Gadget Support
+ #
+-# CONFIG_SND_SOC is not set
++# CONFIG_USB_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
+
+ #
+-# Open Sound System
++# MMC/SD Card Drivers
+ #
+-# CONFIG_SOUND_PRIME is not set
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
+
+ #
+-# HID Devices
++# MMC/SD Host Controller Drivers
+ #
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
++CONFIG_MMC_AT91=y
++# CONFIG_MMC_SPI is not set
++# CONFIG_NEW_LEDS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
+
+ #
+-# USB support
++# RTC interfaces
+ #
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-# CONFIG_USB_ARCH_HAS_EHCI is not set
+-# CONFIG_USB is not set
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+
+ #
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++# I2C RTC drivers
+ #
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
+
+ #
+-# USB Gadget Support
++# SPI RTC drivers
+ #
+-# CONFIG_USB_GADGET is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
+
+ #
+-# MMC/SD Card support
++# Platform RTC drivers
+ #
+-CONFIG_MMC=y
+-# CONFIG_MMC_DEBUG is not set
+-CONFIG_MMC_BLOCK=y
+-CONFIG_MMC_AT91=y
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
+
+ #
+-# Real Time Clock
++# on-CPU RTC drivers
+ #
+-CONFIG_RTC_LIB=y
+-# CONFIG_RTC_CLASS is not set
++CONFIG_RTC_DRV_AT91SAM9=y
+
+ #
+ # File systems
+@@ -816,7 +809,6 @@
+ CONFIG_TMPFS=y
+ # CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_RAMFS=y
+ # CONFIG_CONFIGFS_FS is not set
+
+ #
+@@ -836,20 +828,13 @@
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+ CONFIG_NLS=y
+ CONFIG_NLS_DEFAULT="iso8859-1"
+ CONFIG_NLS_CODEPAGE_437=y
+@@ -890,16 +875,15 @@
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+ CONFIG_NLS_UTF8=y
+-
+-#
+-# Profiling support
+-#
++CONFIG_INSTRUMENTATION=y
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+
+ #
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
+ CONFIG_ENABLE_MUST_CHECK=y
+ # CONFIG_MAGIC_SYSRQ is not set
+ # CONFIG_UNUSED_SYMBOLS is not set
+@@ -907,8 +891,8 @@
+ # CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+ # CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_LOG_BUF_SHIFT=14
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+ # CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+@@ -916,6 +900,9 @@
+ # CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
+ # CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+ # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+@@ -923,10 +910,13 @@
+ CONFIG_DEBUG_INFO=y
+ # CONFIG_DEBUG_VM is not set
+ # CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
+ CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
+ # CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
+ CONFIG_DEBUG_USER=y
+ # CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+@@ -937,10 +927,7 @@
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ # CONFIG_CRYPTO is not set
+
+ #
+@@ -949,9 +936,12 @@
+ CONFIG_BITREVERSE=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
+ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/ateb9200_defconfig linux-2.6/arch/arm/configs/ateb9200_defconfig
+--- linux-2.6.24/arch/arm/configs/ateb9200_defconfig 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/configs/ateb9200_defconfig 2007-12-31 10:43:35.000000000 +0200
+@@ -714,7 +714,7 @@
+ #
+ # I2C Hardware Bus support
+ #
+-CONFIG_I2C_AT91=m
++CONFIG_I2C_GPIO=m
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+ # CONFIG_I2C_STUB is not set
+ # CONFIG_I2C_PCA_ISA is not set
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/cam60_defconfig linux-2.6/arch/arm/configs/cam60_defconfig
+--- linux-2.6.24/arch/arm/configs/cam60_defconfig 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/configs/cam60_defconfig 2008-01-11 09:36:44.000000000 +0200
+@@ -0,0 +1,1217 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.23
++# Wed Jan 9 22:44:49 2008
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_GENERIC_TIME is not set
++# CONFIG_GENERIC_CLOCKEVENTS is not set
++CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++CONFIG_AUDIT=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=17
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_RELAY=y
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++CONFIG_KALLSYMS_ALL=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++CONFIG_BLK_DEV_IO_TRACE=y
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++
++#
++# Boot options
++#
++
++#
++# Power management
++#
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++CONFIG_ARCH_AT91SAM9260=y
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++
++#
++# AT91SAM9260 Variants
++#
++# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
++
++#
++# AT91SAM9260 / AT91SAM9XE Board Type
++#
++# CONFIG_MACH_AT91SAM9260EK is not set
++CONFIG_MACH_CAM60=y
++# CONFIG_MACH_SAM9_L9260 is not set
++
++#
++# AT91 Board Options
++#
++
++#
++# AT91 Feature Selections
++#
++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
++CONFIG_AT91_TIMER_HZ=100
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++CONFIG_PCCARD=m
++# CONFIG_PCMCIA_DEBUG is not set
++CONFIG_PCMCIA=m
++CONFIG_PCMCIA_LOAD_CIS=y
++CONFIG_PCMCIA_IOCTL=y
++
++#
++# PC-card bridges
++#
++
++#
++# Kernel Features
++#
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_PREEMPT is not set
++# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0
++CONFIG_ZBOOT_ROM_BSS=0x20004000
++# CONFIG_ZBOOT_ROM is not set
++CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
++# CONFIG_XIP_KERNEL is not set
++CONFIG_KEXEC=y
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_BINFMT_AOUT=y
++CONFIG_BINFMT_MISC=y
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++CONFIG_SUSPEND_UP_POSSIBLE=y
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++CONFIG_NETWORK_SECMARK=y
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++CONFIG_NET_SCH_FIFO=y
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++CONFIG_CFG80211=m
++CONFIG_WIRELESS_EXT=y
++CONFIG_MAC80211=m
++# CONFIG_MAC80211_DEBUGFS is not set
++# CONFIG_MAC80211_DEBUG is not set
++CONFIG_IEEE80211=m
++# CONFIG_IEEE80211_DEBUG is not set
++CONFIG_IEEE80211_CRYPT_WEP=m
++CONFIG_IEEE80211_CRYPT_CCMP=m
++CONFIG_IEEE80211_CRYPT_TKIP=m
++CONFIG_IEEE80211_SOFTMAC=m
++# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=m
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++CONFIG_MTD_RAM=m
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++CONFIG_MTD_PLATRAM=m
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++CONFIG_MTD_BLOCK2MTD=y
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_VERIFY_WRITE=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_AT91=y
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++CONFIG_SCSI_TGT=y
++CONFIG_SCSI_NETLINK=y
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=y
++CONFIG_CHR_DEV_SCH=y
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++CONFIG_SCSI_LOGGING=y
++CONFIG_SCSI_SCAN_ASYNC=y
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++CONFIG_SCSI_SPI_ATTRS=m
++CONFIG_SCSI_FC_ATTRS=m
++CONFIG_SCSI_ISCSI_ATTRS=m
++CONFIG_SCSI_SAS_ATTRS=m
++CONFIG_SCSI_SAS_LIBSAS=m
++# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++CONFIG_MARVELL_PHY=m
++CONFIG_DAVICOM_PHY=m
++CONFIG_QSEMI_PHY=m
++CONFIG_LXT_PHY=m
++CONFIG_CICADA_PHY=m
++CONFIG_VITESSE_PHY=m
++CONFIG_SMSC_PHY=m
++CONFIG_BROADCOM_PHY=m
++# CONFIG_ICPLUS_PHY is not set
++CONFIG_FIXED_PHY=m
++# CONFIG_FIXED_MII_10_FDX is not set
++# CONFIG_FIXED_MII_100_FDX is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=m
++CONFIG_MACB=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_NET_PCMCIA is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++CONFIG_KEYBOARD_ATKBD=y
++CONFIG_KEYBOARD_SUNKBD=m
++CONFIG_KEYBOARD_LKKBD=m
++CONFIG_KEYBOARD_XTKBD=m
++CONFIG_KEYBOARD_NEWTON=m
++CONFIG_KEYBOARD_STOWAWAY=m
++# CONFIG_KEYBOARD_GPIO is not set
++CONFIG_INPUT_MOUSE=y
++CONFIG_MOUSE_PS2=y
++CONFIG_MOUSE_PS2_ALPS=y
++CONFIG_MOUSE_PS2_LOGIPS2PP=y
++CONFIG_MOUSE_PS2_SYNAPTICS=y
++CONFIG_MOUSE_PS2_LIFEBOOK=y
++CONFIG_MOUSE_PS2_TRACKPOINT=y
++# CONFIG_MOUSE_PS2_TOUCHKIT is not set
++CONFIG_MOUSE_SERIAL=m
++CONFIG_MOUSE_APPLETOUCH=m
++CONFIG_MOUSE_VSXXXAA=m
++# CONFIG_MOUSE_GPIO is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++# CONFIG_SERIO_SERPORT is not set
++CONFIG_SERIO_LIBPS2=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++CONFIG_VT_HW_CONSOLE_BINDING=y
++CONFIG_SERIAL_NONSTANDARD=y
++# CONFIG_MOXA_SMARTIO is not set
++# CONFIG_N_HDLC is not set
++# CONFIG_RISCOM8 is not set
++# CONFIG_SPECIALIX is not set
++# CONFIG_RIO is not set
++# CONFIG_STALDRV is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_WATCHDOG is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_R3964 is not set
++
++#
++# PCMCIA character devices
++#
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=y
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_AT91 is not set
++# CONFIG_I2C_GPIO is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++# CONFIG_I2C_PCA is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_ATMEL=y
++# CONFIG_SPI_BITBANG is not set
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_HWMON is not set
++# CONFIG_MISC_DEVICES is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++# CONFIG_NEW_LEDS is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++CONFIG_USB_LIBUSUAL=y
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++# CONFIG_USB_MON is not set
++
++#
++# USB port drivers
++#
++
++#
++# USB Serial Converter support
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++
++#
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++CONFIG_RTC_INTF_DEV_UIE_EMUL=y
++CONFIG_RTC_DRV_TEST=m
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT91SAM9=y
++
++#
++# DMA Engine support
++#
++# CONFIG_DMA_ENGINE is not set
++
++#
++# DMA Clients
++#
++
++#
++# DMA Devices
++#
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++CONFIG_EXT2_FS_POSIX_ACL=y
++# CONFIG_EXT2_FS_SECURITY is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++CONFIG_FS_POSIX_ACL=y
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++CONFIG_QUOTA=y
++# CONFIG_QFMT_V1 is not set
++# CONFIG_QFMT_V2 is not set
++CONFIG_QUOTACTL=y
++CONFIG_DNOTIFY=y
++CONFIG_AUTOFS_FS=y
++CONFIG_AUTOFS4_FS=y
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++CONFIG_CONFIGFS_FS=y
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="cp437"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=y
++
++#
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
++
++#
++# Kernel hacking
++#
++CONFIG_PRINTK_TIME=y
++# CONFIG_ENABLE_MUST_CHECK is not set
++CONFIG_MAGIC_SYSRQ=y
++CONFIG_UNUSED_SYMBOLS=y
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_FORCED_INLINING is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_DEBUG_USER is not set
++# CONFIG_DEBUG_ERRORS is not set
++# CONFIG_DEBUG_LL is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ABLKCIPHER=m
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=y
++CONFIG_CRYPTO_XCBC=m
++CONFIG_CRYPTO_NULL=m
++CONFIG_CRYPTO_MD4=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=m
++CONFIG_CRYPTO_SHA256=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_WP512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_GF128MUL=m
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=m
++CONFIG_CRYPTO_PCBC=m
++CONFIG_CRYPTO_LRW=m
++CONFIG_CRYPTO_CRYPTD=m
++CONFIG_CRYPTO_DES=m
++CONFIG_CRYPTO_FCRYPT=m
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_TWOFISH_COMMON=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_AES=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_ARC4=m
++CONFIG_CRYPTO_KHAZAD=m
++CONFIG_CRYPTO_ANUBIS=m
++CONFIG_CRYPTO_DEFLATE=m
++CONFIG_CRYPTO_MICHAEL_MIC=m
++CONFIG_CRYPTO_CRC32C=m
++CONFIG_CRYPTO_CAMELLIA=m
++CONFIG_CRYPTO_TEST=m
++CONFIG_CRYPTO_HW=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++CONFIG_LIBCRC32C=m
++CONFIG_AUDIT_GENERIC=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/csb337_defconfig linux-2.6/arch/arm/configs/csb337_defconfig
+--- linux-2.6.24/arch/arm/configs/csb337_defconfig 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/configs/csb337_defconfig 2008-01-09 22:19:31.000000000 +0200
+@@ -1,69 +1,96 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.15
+-# Mon Jan 9 21:51:31 2006
++# Linux kernel version: 2.6.24-rc7
++# Wed Jan 9 22:19:24 2008
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
+ CONFIG_MMU=y
+-CONFIG_UID16=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+ #
+-# Code maturity level options
++# General setup
+ #
+ CONFIG_EXPERIMENTAL=y
+-CONFIG_CLEAN_COMPILE=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+-
+-#
+-# General setup
+-#
+ CONFIG_LOCALVERSION=""
+ CONFIG_LOCALVERSION_AUTO=y
+ # CONFIG_SWAP is not set
+ CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
+ # CONFIG_POSIX_MQUEUE is not set
+ # CONFIG_BSD_PROCESS_ACCT is not set
+-CONFIG_SYSCTL=y
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
+ # CONFIG_AUDIT is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_KOBJECT_UEVENT=y
+ # CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
+ CONFIG_INITRAMFS_SOURCE=""
+ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
+ # CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
+ CONFIG_KALLSYMS=y
+ # CONFIG_KALLSYMS_ALL is not set
+ # CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
+ CONFIG_PRINTK=y
+ CONFIG_BUG=y
++CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
+ CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
+ CONFIG_SHMEM=y
+-CONFIG_CC_ALIGN_FUNCTIONS=0
+-CONFIG_CC_ALIGN_LABELS=0
+-CONFIG_CC_ALIGN_LOOPS=0
+-CONFIG_CC_ALIGN_JUMPS=0
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
+-
+-#
+-# Loadable module support
+-#
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+ # CONFIG_MODULE_FORCE_UNLOAD is not set
+-CONFIG_OBSOLETE_MODPARM=y
+ # CONFIG_MODVERSIONS is not set
+ # CONFIG_MODULE_SRCVERSION_ALL is not set
+ CONFIG_KMOD=y
+-
+-#
+-# Block layer
+-#
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
+
+ #
+ # IO Schedulers
+@@ -81,62 +108,101 @@
+ #
+ # System Type
+ #
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
+ # CONFIG_ARCH_CLPS7500 is not set
+ # CONFIG_ARCH_CLPS711X is not set
+ # CONFIG_ARCH_CO285 is not set
+ # CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
+ # CONFIG_ARCH_FOOTBRIDGE is not set
+-# CONFIG_ARCH_INTEGRATOR is not set
+-# CONFIG_ARCH_IOP3XX is not set
+-# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
+ # CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+ # CONFIG_ARCH_SA1100 is not set
+ # CONFIG_ARCH_S3C2410 is not set
+ # CONFIG_ARCH_SHARK is not set
+ # CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
+ # CONFIG_ARCH_OMAP is not set
+-# CONFIG_ARCH_VERSATILE is not set
+-# CONFIG_ARCH_REALVIEW is not set
+-# CONFIG_ARCH_IMX is not set
+-# CONFIG_ARCH_H720X is not set
+-# CONFIG_ARCH_AAEC2000 is not set
+-CONFIG_ARCH_AT91=y
+-CONFIG_ARCH_AT91RM9200=y
+
+ #
+-# AT91RM9200 Implementations
++# Boot options
+ #
+
+ #
++# Power management
++#
++
++#
++# Atmel AT91 System-on-Chip
++#
++CONFIG_ARCH_AT91RM9200=y
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++# CONFIG_ARCH_AT91X40 is not set
++CONFIG_AT91_PMC_UNIT=y
++
++#
+ # AT91RM9200 Board Type
+ #
++# CONFIG_MACH_ONEARM is not set
+ # CONFIG_ARCH_AT91RM9200DK is not set
+ # CONFIG_MACH_AT91RM9200EK is not set
+ CONFIG_MACH_CSB337=y
+ # CONFIG_MACH_CSB637 is not set
+ # CONFIG_MACH_CARMEVA is not set
+-# CONFIG_MACH_KB9200 is not set
+ # CONFIG_MACH_ATEB9200 is not set
++# CONFIG_MACH_KB9200 is not set
++# CONFIG_MACH_PICOTUX2XX is not set
++# CONFIG_MACH_KAFA is not set
++# CONFIG_MACH_CHUB is not set
++# CONFIG_MACH_HOMEMATIC is not set
++# CONFIG_MACH_ECBAT91 is not set
++# CONFIG_MACH_SWEDATMS is not set
+
+ #
+-# AT91RM9200 Feature Selections
++# AT91 Board Options
++#
++
++#
++# AT91 Feature Selections
+ #
+ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_ATMEL_TCLIB is not set
++CONFIG_AT91_TIMER_HZ=128
+
+ #
+ # Processor Type
+ #
+ CONFIG_CPU_32=y
+ CONFIG_CPU_ARM920T=y
+-CONFIG_CPU_32v4=y
++CONFIG_CPU_32v4T=y
+ CONFIG_CPU_ABRT_EV4T=y
+ CONFIG_CPU_CACHE_V4WT=y
+ CONFIG_CPU_CACHE_VIVT=y
+ CONFIG_CPU_COPY_V4WB=y
+ CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
+
+ #
+ # Processor Features
+@@ -145,15 +211,13 @@
+ # CONFIG_CPU_ICACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_OUTER_CACHE is not set
+
+ #
+ # Bus support
+ #
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# PCCARD (PCMCIA/CardBus) support
+-#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
+ CONFIG_PCCARD=y
+ # CONFIG_PCMCIA_DEBUG is not set
+ CONFIG_PCMCIA=y
+@@ -168,8 +232,13 @@
+ #
+ # Kernel Features
+ #
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+ # CONFIG_PREEMPT is not set
+-# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=128
++# CONFIG_AEABI is not set
+ # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+ CONFIG_SELECT_MEMORY_MODEL=y
+ CONFIG_FLATMEM_MANUAL=y
+@@ -178,9 +247,13 @@
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
+ # CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+ CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
+ CONFIG_LEDS=y
+-CONFIG_LEDS_TIMER=y
+ CONFIG_LEDS_CPU=y
+ CONFIG_ALIGNMENT_TRAP=y
+
+@@ -191,6 +264,7 @@
+ CONFIG_ZBOOT_ROM_BSS=0x0
+ CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+ # CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+
+ #
+ # Floating point emulation
+@@ -215,6 +289,7 @@
+ # Power management options
+ #
+ # CONFIG_PM is not set
++CONFIG_SUSPEND_UP_POSSIBLE=y
+
+ #
+ # Networking
+@@ -227,6 +302,10 @@
+ CONFIG_PACKET=y
+ # CONFIG_PACKET_MMAP is not set
+ CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
+ # CONFIG_NET_KEY is not set
+ CONFIG_INET=y
+ # CONFIG_IP_MULTICAST is not set
+@@ -243,23 +322,26 @@
+ # CONFIG_INET_AH is not set
+ # CONFIG_INET_ESP is not set
+ # CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
+ # CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
+ CONFIG_INET_DIAG=y
+ CONFIG_INET_TCP_DIAG=y
+ # CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_BIC=y
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
+ # CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
+ # CONFIG_NETFILTER is not set
+-
+-#
+-# DCCP Configuration (EXPERIMENTAL)
+-#
+ # CONFIG_IP_DCCP is not set
+-
+-#
+-# SCTP Configuration (EXPERIMENTAL)
+-#
+ # CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
+ # CONFIG_ATM is not set
+ # CONFIG_BRIDGE is not set
+ # CONFIG_VLAN_8021Q is not set
+@@ -269,13 +351,8 @@
+ # CONFIG_ATALK is not set
+ # CONFIG_X25 is not set
+ # CONFIG_LAPB is not set
+-# CONFIG_NET_DIVERT is not set
+ # CONFIG_ECONET is not set
+ # CONFIG_WAN_ROUTER is not set
+-
+-#
+-# QoS and/or fair queueing
+-#
+ # CONFIG_NET_SCHED is not set
+
+ #
+@@ -285,7 +362,17 @@
+ # CONFIG_HAMRADIO is not set
+ # CONFIG_IRDA is not set
+ # CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
+ # CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
+
+ #
+ # Device Drivers
+@@ -294,19 +381,14 @@
+ #
+ # Generic Driver Options
+ #
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ CONFIG_FW_LOADER=y
+ # CONFIG_DEBUG_DRIVER is not set
+-
+-#
+-# Connector - unified userspace <-> kernelspace linker
+-#
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
+ # CONFIG_CONNECTOR is not set
+-
+-#
+-# Memory Technology Devices (MTD)
+-#
+ CONFIG_MTD=y
+ # CONFIG_MTD_DEBUG is not set
+ # CONFIG_MTD_CONCAT is not set
+@@ -319,11 +401,14 @@
+ # User Modules And Translation Layers
+ #
+ CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
+ CONFIG_MTD_BLOCK=y
+ # CONFIG_FTL is not set
+ # CONFIG_NFTL is not set
+ # CONFIG_INFTL is not set
+ # CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
+
+ #
+ # RAM/ROM/Flash chip drivers
+@@ -349,15 +434,14 @@
+ # CONFIG_MTD_RAM is not set
+ # CONFIG_MTD_ROM is not set
+ # CONFIG_MTD_ABSENT is not set
+-# CONFIG_MTD_XIP is not set
+
+ #
+ # Mapping drivers for chip access
+ #
+ # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+ CONFIG_MTD_PHYSMAP=y
+-CONFIG_MTD_PHYSMAP_START=0
+-CONFIG_MTD_PHYSMAP_LEN=0
++CONFIG_MTD_PHYSMAP_START=0x0
++CONFIG_MTD_PHYSMAP_LEN=0x0
+ CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+ # CONFIG_MTD_ARM_INTEGRATOR is not set
+ # CONFIG_MTD_PLATRAM is not set
+@@ -368,7 +452,6 @@
+ # CONFIG_MTD_SLRAM is not set
+ # CONFIG_MTD_PHRAM is not set
+ # CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLKMTD is not set
+ # CONFIG_MTD_BLOCK2MTD is not set
+
+ #
+@@ -378,29 +461,15 @@
+ # CONFIG_MTD_DOC2001 is not set
+ # CONFIG_MTD_DOC2001PLUS is not set
+ # CONFIG_MTD_AT91_DATAFLASH is not set
+-
+-#
+-# NAND Flash Device Drivers
+-#
+ # CONFIG_MTD_NAND is not set
+-
+-#
+-# OneNAND Flash Device Drivers
+-#
+ # CONFIG_MTD_ONENAND is not set
+
+ #
+-# Parallel port support
++# UBI - Unsorted block images
+ #
++# CONFIG_MTD_UBI is not set
+ # CONFIG_PARPORT is not set
+-
+-#
+-# Plug and Play support
+-#
+-
+-#
+-# Block devices
+-#
++CONFIG_BLK_DEV=y
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+@@ -409,13 +478,12 @@
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=8192
+-CONFIG_BLK_DEV_INITRD=y
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
+ # CONFIG_ATA_OVER_ETH is not set
+-
+-#
+-# ATA/ATAPI/MFM/RLL support
+-#
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_ATMEL_SSC=y
+ # CONFIG_IDE is not set
+
+ #
+@@ -423,6 +491,9 @@
+ #
+ # CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
+ CONFIG_SCSI_PROC_FS=y
+
+ #
+@@ -441,97 +512,61 @@
+ # CONFIG_SCSI_MULTI_LUN is not set
+ # CONFIG_SCSI_CONSTANTS is not set
+ # CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
+
+ #
+-# SCSI Transport Attributes
++# SCSI Transports
+ #
+ # CONFIG_SCSI_SPI_ATTRS is not set
+ # CONFIG_SCSI_FC_ATTRS is not set
+ # CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_ATTRS is not set
+-
+-#
+-# SCSI low-level drivers
+-#
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
+ # CONFIG_ISCSI_TCP is not set
+-# CONFIG_SCSI_SATA is not set
+ # CONFIG_SCSI_DEBUG is not set
+-
+-#
+-# PCMCIA SCSI adapter support
+-#
+-# CONFIG_PCMCIA_AHA152X is not set
+-# CONFIG_PCMCIA_FDOMAIN is not set
+-# CONFIG_PCMCIA_NINJA_SCSI is not set
+-# CONFIG_PCMCIA_QLOGIC is not set
+-# CONFIG_PCMCIA_SYM53C500 is not set
+-
+-#
+-# Multi-device support (RAID and LVM)
+-#
++# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
++# CONFIG_ATA is not set
+ # CONFIG_MD is not set
+-
+-#
+-# Fusion MPT device support
+-#
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-
+-#
+-# I2O device support
+-#
+-
+-#
+-# Network device support
+-#
+ CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
+ # CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
+ # CONFIG_EQUALIZER is not set
+ # CONFIG_TUN is not set
+-
+-#
+-# PHY device support
+-#
++# CONFIG_VETH is not set
+ # CONFIG_PHYLIB is not set
+-
+-#
+-# Ethernet (10 or 100Mbit)
+-#
+ CONFIG_NET_ETHERNET=y
+ CONFIG_MII=y
+ CONFIG_ARM_AT91_ETHER=y
++# CONFIG_AX88796 is not set
+ # CONFIG_SMC91X is not set
+ # CONFIG_DM9000 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++CONFIG_NETDEV_10000=y
+
+ #
+-# Ethernet (1000 Mbit)
+-#
+-
+-#
+-# Ethernet (10000 Mbit)
+-#
+-
+-#
+-# Token Ring devices
++# Wireless LAN
+ #
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
+
+ #
+-# Wireless LAN (non-hamradio)
+-#
+-# CONFIG_NET_RADIO is not set
+-
+-#
+-# PCMCIA network device support
++# USB Network Adapters
+ #
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
+ # CONFIG_NET_PCMCIA is not set
+-
+-#
+-# Wan interfaces
+-#
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
+@@ -539,26 +574,23 @@
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+ # CONFIG_NET_POLL_CONTROLLER is not set
+-
+-#
+-# ISDN subsystem
+-#
+ # CONFIG_ISDN is not set
+
+ #
+ # Input device support
+ #
+ CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
+
+ #
+ # Userland interfaces
+ #
+ CONFIG_INPUT_MOUSEDEV=y
+-CONFIG_INPUT_MOUSEDEV_PSAUX=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+ # CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_TSDEV is not set
+ # CONFIG_INPUT_EVDEV is not set
+ # CONFIG_INPUT_EVBUG is not set
+
+@@ -568,6 +600,7 @@
+ # CONFIG_INPUT_KEYBOARD is not set
+ # CONFIG_INPUT_MOUSE is not set
+ # CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
+ # CONFIG_INPUT_TOUCHSCREEN is not set
+ # CONFIG_INPUT_MISC is not set
+
+@@ -583,6 +616,7 @@
+ CONFIG_VT=y
+ CONFIG_VT_CONSOLE=y
+ CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+
+ #
+@@ -601,152 +635,114 @@
+ CONFIG_UNIX98_PTYS=y
+ CONFIG_LEGACY_PTYS=y
+ CONFIG_LEGACY_PTY_COUNT=256
+-
+-#
+-# IPMI
+-#
+ # CONFIG_IPMI_HANDLER is not set
+-
+-#
+-# Watchdog Cards
+-#
+-CONFIG_WATCHDOG=y
+-CONFIG_WATCHDOG_NOWAYOUT=y
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_AT91RM9200_WATCHDOG=y
+-
+-#
+-# USB-based Watchdog Cards
+-#
+-# CONFIG_USBPCWATCHDOG is not set
+ # CONFIG_HW_RANDOM is not set
+ # CONFIG_NVRAM is not set
+-# CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+
+ #
+-# Ftape, the floppy tape device driver
+-#
+-
+-#
+ # PCMCIA character devices
+ #
+ # CONFIG_SYNCLINK_CS is not set
+ # CONFIG_CARDMAN_4000 is not set
+ # CONFIG_CARDMAN_4040 is not set
+ # CONFIG_RAW_DRIVER is not set
+-
+-#
+-# TPM devices
+-#
+ # CONFIG_TCG_TPM is not set
+-# CONFIG_TELCLOCK is not set
+ CONFIG_AT91_SPI=y
+ CONFIG_AT91_SPIDEV=y
+-
+-#
+-# I2C support
+-#
+ CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
+ CONFIG_I2C_CHARDEV=y
+
+ #
+ # I2C Algorithms
+ #
+-# CONFIG_I2C_ALGOBIT is not set
++CONFIG_I2C_ALGOBIT=y
+ # CONFIG_I2C_ALGOPCF is not set
+ # CONFIG_I2C_ALGOPCA is not set
+
+ #
+ # I2C Hardware Bus support
+ #
+-CONFIG_I2C_AT91=y
++CONFIG_I2C_GPIO=y
++# CONFIG_I2C_OCORES is not set
+ # CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
+ # CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_PCA_ISA is not set
++# CONFIG_I2C_TINY_USB is not set
++# CONFIG_I2C_PCA is not set
+
+ #
+ # Miscellaneous I2C Chip support
+ #
+ # CONFIG_SENSORS_DS1337 is not set
+ # CONFIG_SENSORS_DS1374 is not set
++# CONFIG_DS1682 is not set
+ # CONFIG_SENSORS_EEPROM is not set
+ # CONFIG_SENSORS_PCF8574 is not set
+ # CONFIG_SENSORS_PCA9539 is not set
+ # CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_SENSORS_RTC8564 is not set
+ # CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_RTC_X1205_I2C is not set
++# CONFIG_SENSORS_TSL2550 is not set
+ # CONFIG_I2C_DEBUG_CORE is not set
+ # CONFIG_I2C_DEBUG_ALGO is not set
+ # CONFIG_I2C_DEBUG_BUS is not set
+ # CONFIG_I2C_DEBUG_CHIP is not set
+
+ #
+-# Hardware Monitoring support
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
+ #
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ASB100 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_FSCHER is not set
+-# CONFIG_SENSORS_FSCPOS is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT91RM9200_WATCHDOG=y
+
+ #
+-# Misc devices
++# USB-based Watchdog Cards
+ #
++# CONFIG_USBPCWATCHDOG is not set
+
+ #
+-# Multimedia Capabilities Port drivers
++# Sonics Silicon Backplane
+ #
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
+
+ #
+-# Multimedia devices
++# Multifunction device drivers
+ #
+-# CONFIG_VIDEO_DEV is not set
++# CONFIG_MFD_SM501 is not set
+
+ #
+-# Digital Video Broadcasting Devices
++# Multimedia devices
+ #
+-# CONFIG_DVB is not set
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++# CONFIG_USB_DABUSB is not set
+
+ #
+ # Graphics support
+ #
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+ # CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
+
+ #
+ # Console display driver support
+@@ -758,12 +754,25 @@
+ # Sound
+ #
+ # CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++CONFIG_HID_DEBUG=y
++# CONFIG_HIDRAW is not set
+
+ #
+-# USB support
++# USB Input Devices
+ #
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
++#
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++CONFIG_USB_SUPPORT=y
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+ CONFIG_USB=y
+ CONFIG_USB_DEBUG=y
+
+@@ -771,7 +780,7 @@
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
+-# CONFIG_USB_BANDWIDTH is not set
++CONFIG_USB_DEVICE_CLASS=y
+ # CONFIG_USB_DYNAMIC_MINORS is not set
+ # CONFIG_USB_OTG is not set
+
+@@ -780,9 +789,11 @@
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
+
+ #
+ # USB Device Class drivers
+@@ -801,59 +812,21 @@
+ # CONFIG_USB_STORAGE_DEBUG is not set
+ # CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
+ # CONFIG_USB_STORAGE_DPCM is not set
+ # CONFIG_USB_STORAGE_USBAT is not set
+ # CONFIG_USB_STORAGE_SDDR09 is not set
+ # CONFIG_USB_STORAGE_SDDR55 is not set
+ # CONFIG_USB_STORAGE_JUMPSHOT is not set
+-
+-#
+-# USB Input Devices
+-#
+-# CONFIG_USB_HID is not set
+-
+-#
+-# USB HID Boot Protocol drivers
+-#
+-# CONFIG_USB_KBD is not set
+-# CONFIG_USB_MOUSE is not set
+-# CONFIG_USB_AIPTEK is not set
+-# CONFIG_USB_WACOM is not set
+-# CONFIG_USB_ACECAD is not set
+-# CONFIG_USB_KBTAB is not set
+-# CONFIG_USB_POWERMATE is not set
+-# CONFIG_USB_MTOUCH is not set
+-# CONFIG_USB_ITMTOUCH is not set
+-# CONFIG_USB_EGALAX is not set
+-# CONFIG_USB_YEALINK is not set
+-# CONFIG_USB_XPAD is not set
+-# CONFIG_USB_ATI_REMOTE is not set
+-# CONFIG_USB_KEYSPAN_REMOTE is not set
+-# CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
+
+ #
+ # USB Imaging devices
+ #
+ # CONFIG_USB_MDC800 is not set
+ # CONFIG_USB_MICROTEK is not set
+-
+-#
+-# USB Multimedia devices
+-#
+-# CONFIG_USB_DABUSB is not set
+-
+-#
+-# Video4Linux support is needed for USB Multimedia device support
+-#
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET is not set
+ CONFIG_USB_MON=y
+
+ #
+@@ -866,15 +839,18 @@
+ CONFIG_USB_SERIAL=y
+ CONFIG_USB_SERIAL_CONSOLE=y
+ CONFIG_USB_SERIAL_GENERIC=y
++# CONFIG_USB_SERIAL_AIRCABLE is not set
+ # CONFIG_USB_SERIAL_AIRPRIME is not set
+-# CONFIG_USB_SERIAL_ANYDATA is not set
++# CONFIG_USB_SERIAL_ARK3116 is not set
+ # CONFIG_USB_SERIAL_BELKIN is not set
++# CONFIG_USB_SERIAL_CH341 is not set
+ # CONFIG_USB_SERIAL_WHITEHEAT is not set
+ # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+ # CONFIG_USB_SERIAL_CP2101 is not set
+ # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+ # CONFIG_USB_SERIAL_EMPEG is not set
+ CONFIG_USB_SERIAL_FTDI_SIO=y
++# CONFIG_USB_SERIAL_FUNSOFT is not set
+ # CONFIG_USB_SERIAL_VISOR is not set
+ # CONFIG_USB_SERIAL_IPAQ is not set
+ # CONFIG_USB_SERIAL_IR is not set
+@@ -899,14 +875,20 @@
+ # CONFIG_USB_SERIAL_KLSI is not set
+ # CONFIG_USB_SERIAL_KOBIL_SCT is not set
+ CONFIG_USB_SERIAL_MCT_U232=y
++# CONFIG_USB_SERIAL_MOS7720 is not set
++# CONFIG_USB_SERIAL_MOS7840 is not set
++# CONFIG_USB_SERIAL_NAVMAN is not set
+ # CONFIG_USB_SERIAL_PL2303 is not set
++# CONFIG_USB_SERIAL_OTI6858 is not set
+ # CONFIG_USB_SERIAL_HP4X is not set
+ # CONFIG_USB_SERIAL_SAFE is not set
++# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+ # CONFIG_USB_SERIAL_TI is not set
+ # CONFIG_USB_SERIAL_CYBERJACK is not set
+ # CONFIG_USB_SERIAL_XIRCOM is not set
+ # CONFIG_USB_SERIAL_OPTION is not set
+ # CONFIG_USB_SERIAL_OMNINET is not set
++# CONFIG_USB_SERIAL_DEBUG is not set
+ CONFIG_USB_EZUSB=y
+
+ #
+@@ -914,16 +896,22 @@
+ #
+ # CONFIG_USB_EMI62 is not set
+ # CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
+ # CONFIG_USB_AUERSWALD is not set
+ # CONFIG_USB_RIO500 is not set
+ # CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGETKIT is not set
+-# CONFIG_USB_PHIDGETSERVO is not set
++# CONFIG_USB_PHIDGET is not set
+ # CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
+ # CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_TEST is not set
+
+ #
+@@ -934,13 +922,19 @@
+ # USB Gadget Support
+ #
+ CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
+ # CONFIG_USB_GADGET_DEBUG_FILES is not set
+ CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
+ # CONFIG_USB_GADGET_NET2280 is not set
+ # CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
+ # CONFIG_USB_GADGET_GOKU is not set
+ # CONFIG_USB_GADGET_LH7A40X is not set
+ # CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
+ CONFIG_USB_GADGET_AT91=y
+ CONFIG_USB_AT91=y
+ # CONFIG_USB_GADGET_DUMMY_HCD is not set
+@@ -950,22 +944,28 @@
+ # CONFIG_USB_GADGETFS is not set
+ # CONFIG_USB_FILE_STORAGE is not set
+ # CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
+
+ #
+-# MMC/SD Card support
++# MMC/SD Card Drivers
+ #
+-CONFIG_MMC=y
+-# CONFIG_MMC_DEBUG is not set
+ CONFIG_MMC_BLOCK=y
+-CONFIG_MMC_AT91RM9200=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
+
+ #
+-# Real Time Clock
++# MMC/SD Host Controller Drivers
+ #
++# CONFIG_MMC_AT91 is not set
++# CONFIG_NEW_LEDS is not set
+ CONFIG_RTC_LIB=y
+ CONFIG_RTC_CLASS=y
+ CONFIG_RTC_HCTOSYS=y
+ CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
++# CONFIG_RTC_DEBUG is not set
+
+ #
+ # RTC interfaces
+@@ -974,39 +974,60 @@
+ CONFIG_RTC_INTF_PROC=y
+ CONFIG_RTC_INTF_DEV=y
+ # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
+
+ #
+-# RTC drivers
++# I2C RTC drivers
+ #
+-# CONFIG_RTC_DRV_X1205 is not set
+ CONFIG_RTC_DRV_DS1307=y
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
+ # CONFIG_RTC_DRV_DS1672 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
+ # CONFIG_RTC_DRV_PCF8563 is not set
+ # CONFIG_RTC_DRV_PCF8583 is not set
+-# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++
++#
++# SPI RTC drivers
++#
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
+ # CONFIG_RTC_DRV_M48T86 is not set
+-CONFIG_RTC_DRV_AT91RM9200=y
+-# CONFIG_RTC_DRV_TEST is not set
++# CONFIG_RTC_DRV_M48T59 is not set
+ # CONFIG_RTC_DRV_V3020 is not set
+
+ #
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT91RM9200=y
++
++#
+ # File systems
+ #
+ CONFIG_EXT2_FS=y
+ # CONFIG_EXT2_FS_XATTR is not set
+ # CONFIG_EXT2_FS_XIP is not set
+ # CONFIG_EXT3_FS is not set
+-# CONFIG_JBD is not set
++# CONFIG_EXT4DEV_FS is not set
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+ # CONFIG_FS_POSIX_ACL is not set
+ # CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+ CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
+ # CONFIG_QUOTA is not set
+ CONFIG_DNOTIFY=y
+ # CONFIG_AUTOFS_FS is not set
+@@ -1030,11 +1051,12 @@
+ # Pseudo filesystems
+ #
+ CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
+ CONFIG_SYSFS=y
+ CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+-CONFIG_RAMFS=y
+-# CONFIG_RELAYFS_FS is not set
++# CONFIG_CONFIGFS_FS is not set
+
+ #
+ # Miscellaneous filesystems
+@@ -1046,7 +1068,6 @@
+ # CONFIG_BEFS_FS is not set
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
+-# CONFIG_JFFS_FS is not set
+ # CONFIG_JFFS2_FS is not set
+ CONFIG_CRAMFS=y
+ # CONFIG_VXFS_FS is not set
+@@ -1054,10 +1075,7 @@
+ # CONFIG_QNX4FS_FS is not set
+ # CONFIG_SYSV_FS is not set
+ # CONFIG_UFS_FS is not set
+-
+-#
+-# Network File Systems
+-#
++CONFIG_NETWORK_FILESYSTEMS=y
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
+@@ -1070,6 +1088,7 @@
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
+ CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
+ CONFIG_RPCSEC_GSS_KRB5=y
+ # CONFIG_RPCSEC_GSS_SPKM3 is not set
+ # CONFIG_SMB_FS is not set
+@@ -1077,43 +1096,56 @@
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
+ # CONFIG_AFS_FS is not set
+-# CONFIG_9P_FS is not set
+
+ #
+ # Partition Types
+ #
+ # CONFIG_PARTITION_ADVANCED is not set
+ CONFIG_MSDOS_PARTITION=y
+-
+-#
+-# Native Language Support
+-#
+ # CONFIG_NLS is not set
+-
+-#
+-# Profiling support
+-#
++# CONFIG_DLM is not set
++CONFIG_INSTRUMENTATION=y
+ # CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
+
+ #
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
+-CONFIG_DEBUG_KERNEL=y
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
+ # CONFIG_MAGIC_SYSRQ is not set
+-CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
+ CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
+ # CONFIG_SCHEDSTATS is not set
+-# CONFIG_DEBUG_SLAB is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
+ # CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
+ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_FS is not set
+ # CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
+ CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
+ # CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
+ CONFIG_DEBUG_USER=y
+ # CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+@@ -1124,12 +1156,13 @@
+ #
+ # CONFIG_KEYS is not set
+ # CONFIG_SECURITY is not set
+-
+-#
+-# Cryptographic options
+-#
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+ CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_MANAGER=y
+ # CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
+ # CONFIG_CRYPTO_NULL is not set
+ # CONFIG_CRYPTO_MD4 is not set
+ CONFIG_CRYPTO_MD5=y
+@@ -1138,7 +1171,15 @@
+ # CONFIG_CRYPTO_SHA512 is not set
+ # CONFIG_CRYPTO_WP512 is not set
+ # CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CRYPTD is not set
+ CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
+ # CONFIG_CRYPTO_BLOWFISH is not set
+ # CONFIG_CRYPTO_TWOFISH is not set
+ # CONFIG_CRYPTO_SERPENT is not set
+@@ -1149,20 +1190,27 @@
+ # CONFIG_CRYPTO_ARC4 is not set
+ # CONFIG_CRYPTO_KHAZAD is not set
+ # CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
+ # CONFIG_CRYPTO_DEFLATE is not set
+ # CONFIG_CRYPTO_MICHAEL_MIC is not set
+ # CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
+ # CONFIG_CRYPTO_TEST is not set
+-
+-#
+-# Hardware crypto devices
+-#
++# CONFIG_CRYPTO_AUTHENC is not set
++CONFIG_CRYPTO_HW=y
+
+ #
+ # Library routines
+ #
++CONFIG_BITREVERSE=y
+ # CONFIG_CRC_CCITT is not set
+ # CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
+ CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
+ # CONFIG_LIBCRC32C is not set
+ CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/csb637_defconfig linux-2.6/arch/arm/configs/csb637_defconfig
+--- linux-2.6.24/arch/arm/configs/csb637_defconfig 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/configs/csb637_defconfig 2007-12-31 10:43:35.000000000 +0200
+@@ -658,14 +658,14 @@
+ #
+ # I2C Algorithms
+ #
+-# CONFIG_I2C_ALGOBIT is not set
++CONFIG_I2C_ALGOBIT=y
+ # CONFIG_I2C_ALGOPCF is not set
+ # CONFIG_I2C_ALGOPCA is not set
+
+ #
+ # I2C Hardware Bus support
+ #
+-CONFIG_I2C_AT91=y
++CONFIG_I2C_GPIO=y
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+ # CONFIG_I2C_STUB is not set
+ # CONFIG_I2C_PCA_ISA is not set
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/ecbat91_defconfig linux-2.6/arch/arm/configs/ecbat91_defconfig
+--- linux-2.6.24/arch/arm/configs/ecbat91_defconfig 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/configs/ecbat91_defconfig 2007-12-31 15:18:42.000000000 +0200
+@@ -0,0 +1,1315 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.22-rc4
++# Sat Jun 9 01:30:18 2007
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_GENERIC_TIME is not set
++# CONFIG_GENERIC_CLOCKEVENTS is not set
++CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_LOCK_KERNEL=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++# CONFIG_AUDIT is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_BLK_DEV_INITRD is not set
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++
++#
++# Loadable module support
++#
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++
++#
++# Block layer
++#
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++# CONFIG_IOSCHED_DEADLINE is not set
++# CONFIG_IOSCHED_CFQ is not set
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++
++#
++# Atmel AT91 System-on-Chip
++#
++CONFIG_ARCH_AT91RM9200=y
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++
++#
++# AT91RM9200 Board Type
++#
++# CONFIG_MACH_ONEARM is not set
++# CONFIG_ARCH_AT91RM9200DK is not set
++# CONFIG_MACH_AT91RM9200EK is not set
++# CONFIG_MACH_CSB337 is not set
++# CONFIG_MACH_CSB637 is not set
++# CONFIG_MACH_CARMEVA is not set
++# CONFIG_MACH_ATEB9200 is not set
++# CONFIG_MACH_KB9200 is not set
++# CONFIG_MACH_PICOTUX2XX is not set
++# CONFIG_MACH_KAFA is not set
++# CONFIG_MACH_CHUB is not set
++CONFIG_MACH_ECBAT91=y
++
++#
++# AT91 Board Options
++#
++# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
++
++#
++# AT91 Feature Selections
++#
++CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
++# CONFIG_ATMEL_TCLIB is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM920T=y
++CONFIG_CPU_32v4T=y
++CONFIG_CPU_ABRT_EV4T=y
++CONFIG_CPU_CACHE_V4WT=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_OUTER_CACHE is not set
++
++#
++# Bus support
++#
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++CONFIG_PCCARD=y
++# CONFIG_PCMCIA_DEBUG is not set
++CONFIG_PCMCIA=y
++CONFIG_PCMCIA_LOAD_CIS=y
++CONFIG_PCMCIA_IOCTL=y
++
++#
++# PC-card bridges
++#
++CONFIG_AT91_CF=y
++
++#
++# Kernel Features
++#
++# CONFIG_TICK_ONESHOT is not set
++CONFIG_PREEMPT=y
++# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_LEDS=y
++CONFIG_LEDS_TIMER=y
++CONFIG_LEDS_CPU=y
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++CONFIG_NET_SCH_FIFO=y
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++CONFIG_CFG80211=y
++CONFIG_WIRELESS_EXT=y
++CONFIG_MAC80211=y
++# CONFIG_MAC80211_DEBUG is not set
++CONFIG_IEEE80211=y
++# CONFIG_IEEE80211_DEBUG is not set
++CONFIG_IEEE80211_CRYPT_WEP=y
++# CONFIG_IEEE80211_CRYPT_CCMP is not set
++# CONFIG_IEEE80211_CRYPT_TKIP is not set
++CONFIG_IEEE80211_SOFTMAC=y
++CONFIG_IEEE80211_SOFTMAC_DEBUG=y
++# CONFIG_RFKILL is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++# CONFIG_STANDALONE is not set
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++CONFIG_FW_LOADER=y
++# CONFIG_SYS_HYPERVISOR is not set
++
++#
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_AFS_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++CONFIG_MTD_DATAFLASH=y
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++
++#
++# Parallel port support
++#
++# CONFIG_PARPORT is not set
++
++#
++# Plug and Play support
++#
++# CONFIG_PNPACPI is not set
++
++#
++# Block devices
++#
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++# CONFIG_BLK_DEV_RAM is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=y
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++
++#
++# SCSI low-level drivers
++#
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++
++#
++# PCMCIA SCSI adapter support
++#
++# CONFIG_PCMCIA_AHA152X is not set
++# CONFIG_PCMCIA_FDOMAIN is not set
++# CONFIG_PCMCIA_NINJA_SCSI is not set
++# CONFIG_PCMCIA_QLOGIC is not set
++# CONFIG_PCMCIA_SYM53C500 is not set
++# CONFIG_ATA is not set
++
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
++
++#
++# Network device support
++#
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_PHYLIB is not set
++
++#
++# Ethernet (10 or 100Mbit)
++#
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_ARM_AT91_ETHER=y
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_NET_PCMCIA is not set
++# CONFIG_WAN is not set
++CONFIG_PPP=y
++CONFIG_PPP_MULTILINK=y
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_ASYNC=y
++# CONFIG_PPP_SYNC_TTY is not set
++# CONFIG_PPP_DEFLATE is not set
++# CONFIG_PPP_BSDCOMP is not set
++# CONFIG_PPP_MPPE is not set
++# CONFIG_PPPOE is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=y
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++
++#
++# IPMI
++#
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++# CONFIG_AT91RM9200_WATCHDOG is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_R3964 is not set
++
++#
++# PCMCIA character devices
++#
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
++# CONFIG_RAW_DRIVER is not set
++
++#
++# TPM devices
++#
++# CONFIG_TCG_TPM is not set
++# CONFIG_AT91_SPI is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=y
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_GPIO=y
++# CONFIG_I2C_GPIO is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++# CONFIG_I2C_PCA is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_ATMEL is not set
++CONFIG_SPI_BITBANG=y
++CONFIG_SPI_AT91=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_ABITUGURU is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ASB100 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_FSCHER is not set
++# CONFIG_SENSORS_FSCPOS is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM70 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++
++#
++# Misc devices
++#
++# CONFIG_BLINK is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# LED devices
++#
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++
++#
++# LED Triggers
++#
++# CONFIG_LEDS_TRIGGERS is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_FB is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++
++#
++# HID Devices
++#
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++
++#
++# USB Input Devices
++#
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
++#
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++
++#
++# USB support
++#
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_DEVICE_CLASS is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++CONFIG_USB_PRINTER=y
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++# CONFIG_USB_MON is not set
++
++#
++# USB port drivers
++#
++
++#
++# USB Serial Converter support
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++
++#
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=y
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
++# CONFIG_USB_ZERO is not set
++# CONFIG_USB_ETH is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++CONFIG_MMC_DEBUG=y
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_AT91=y
++
++#
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++# CONFIG_RTC_HCTOSYS is not set
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_RTC_DRV_AT91RM9200=y
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++CONFIG_REISERFS_FS=y
++# CONFIG_REISERFS_CHECK is not set
++# CONFIG_REISERFS_PROC_INFO is not set
++# CONFIG_REISERFS_FS_XATTR is not set
++# CONFIG_JFS_FS is not set
++CONFIG_FS_POSIX_ACL=y
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++CONFIG_CONFIGFS_FS=y
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_ACL_SUPPORT=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++# CONFIG_NLS_CODEPAGE_437 is not set
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++# CONFIG_NLS_ISO8859_1 is not set
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_FRAME_POINTER=y
++CONFIG_DEBUG_USER=y
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++
++#
++# Cryptographic options
++#
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=y
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++CONFIG_CRYPTO_AES=y
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++CONFIG_CRYPTO_ARC4=y
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Hardware crypto devices
++#
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=y
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/homematic_defconfig linux-2.6/arch/arm/configs/homematic_defconfig
+--- linux-2.6.24/arch/arm/configs/homematic_defconfig 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/configs/homematic_defconfig 2007-12-31 15:18:42.000000000 +0200
+@@ -0,0 +1,1263 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.21.3
++# Mon Jun 18 12:28:42 2007
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_GENERIC_TIME is not set
++CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++# CONFIG_SYSFS_DEPRECATED is not set
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SHMEM=y
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
++
++#
++# Loadable module support
++#
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++
++#
++# Block layer
++#
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++# CONFIG_IOSCHED_AS is not set
++CONFIG_IOSCHED_DEADLINE=y
++# CONFIG_IOSCHED_CFQ is not set
++# CONFIG_DEFAULT_AS is not set
++CONFIG_DEFAULT_DEADLINE=y
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="deadline"
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_OMAP is not set
++
++#
++# Atmel AT91 System-on-Chip
++#
++CONFIG_ARCH_AT91RM9200=y
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++
++#
++# AT91RM9200 Board Type
++#
++# CONFIG_MACH_ONEARM is not set
++# CONFIG_ARCH_AT91RM9200DK is not set
++# CONFIG_MACH_AT91RM9200EK is not set
++# CONFIG_MACH_CSB337 is not set
++# CONFIG_MACH_CSB637 is not set
++# CONFIG_MACH_CARMEVA is not set
++# CONFIG_MACH_ATEB9200 is not set
++# CONFIG_MACH_KB9200 is not set
++# CONFIG_MACH_KAFA is not set
++# CONFIG_MACH_CHUB is not set
++CONFIG_MACH_HOMEMATIC=y
++
++#
++# AT91 Board Options
++#
++
++#
++# AT91 Feature Selections
++#
++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM920T=y
++CONFIG_CPU_32v4T=y
++CONFIG_CPU_ABRT_EV4T=y
++CONFIG_CPU_CACHE_V4WT=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_OUTER_CACHE is not set
++
++#
++# Bus support
++#
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_PREEMPT is not set
++# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE=""
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_SCTP is not set
++
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++CONFIG_IEEE80211=m
++# CONFIG_IEEE80211_DEBUG is not set
++CONFIG_IEEE80211_CRYPT_WEP=m
++CONFIG_IEEE80211_CRYPT_CCMP=m
++CONFIG_IEEE80211_CRYPT_TKIP=m
++CONFIG_IEEE80211_SOFTMAC=m
++# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
++CONFIG_WIRELESS_EXT=y
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_SYS_HYPERVISOR is not set
++
++#
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
++
++#
++# Memory Technology Devices (MTD)
++#
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_AT91_DATAFLASH=y
++
++#
++# NAND Flash Device Drivers
++#
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_AT91=y
++# CONFIG_MTD_NAND_NANDSIM is not set
++
++#
++# OneNAND Flash Device Drivers
++#
++# CONFIG_MTD_ONENAND is not set
++
++#
++# Parallel port support
++#
++# CONFIG_PARPORT is not set
++
++#
++# Plug and Play support
++#
++# CONFIG_PNPACPI is not set
++
++#
++# Block devices
++#
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_SCSI_PROC_FS is not set
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++
++#
++# SCSI low-level drivers
++#
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++
++#
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++# CONFIG_ATA is not set
++
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
++
++#
++# Fusion MPT device support
++#
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++
++#
++# I2O device support
++#
++
++#
++# Network device support
++#
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++
++#
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
++
++#
++# Ethernet (10 or 100Mbit)
++#
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_ARM_AT91_ETHER=y
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++
++#
++# Ethernet (1000 Mbit)
++#
++
++#
++# Ethernet (10000 Mbit)
++#
++
++#
++# Token Ring devices
++#
++
++#
++# Wireless LAN (non-hamradio)
++#
++CONFIG_NET_RADIO=y
++# CONFIG_NET_WIRELESS_RTNETLINK is not set
++
++#
++# Obsolete Wireless cards support (pre-802.11)
++#
++# CONFIG_STRIP is not set
++# CONFIG_USB_ZD1201 is not set
++# CONFIG_HOSTAP is not set
++CONFIG_ZD1211RW=m
++# CONFIG_ZD1211RW_DEBUG is not set
++
++#
++# Wan interfaces
++#
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++CONFIG_KEYBOARD_ATKBD=y
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_KEYBOARD_GPIO is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++CONFIG_SERIO_LIBPS2=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++
++#
++# IPMI
++#
++# CONFIG_IPMI_HANDLER is not set
++
++#
++# Watchdog Cards
++#
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_AT91RM9200_WATCHDOG=y
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_DTLK is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++
++#
++# TPM devices
++#
++# CONFIG_TCG_TPM is not set
++CONFIG_AT91_SPI=y
++# CONFIG_AT91_SPIDEV is not set
++
++#
++# I2C support
++#
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_AT91 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_PCA is not set
++# CONFIG_I2C_PCA_ISA is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
++
++#
++# Hardware Monitoring support
++#
++# CONFIG_HWMON is not set
++# CONFIG_HWMON_VID is not set
++
++#
++# Misc devices
++#
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
++
++#
++# LED drivers
++#
++
++#
++# LED Triggers
++#
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++
++#
++# Digital Video Broadcasting Devices
++#
++# CONFIG_DVB is not set
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++# CONFIG_FB is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++
++#
++# HID Devices
++#
++# CONFIG_HID is not set
++
++#
++# USB support
++#
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Input Devices
++#
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
++#
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++# CONFIG_USB_AIPTEK is not set
++# CONFIG_USB_WACOM is not set
++# CONFIG_USB_ACECAD is not set
++# CONFIG_USB_KBTAB is not set
++# CONFIG_USB_POWERMATE is not set
++# CONFIG_USB_TOUCHSCREEN is not set
++# CONFIG_USB_YEALINK is not set
++# CONFIG_USB_XPAD is not set
++# CONFIG_USB_ATI_REMOTE is not set
++# CONFIG_USB_ATI_REMOTE2 is not set
++# CONFIG_USB_KEYSPAN_REMOTE is not set
++# CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_GTCO is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_USB_MON is not set
++
++#
++# USB port drivers
++#
++
++#
++# USB Serial Converter support
++#
++CONFIG_USB_SERIAL=m
++# CONFIG_USB_SERIAL_GENERIC is not set
++# CONFIG_USB_SERIAL_AIRCABLE is not set
++# CONFIG_USB_SERIAL_AIRPRIME is not set
++# CONFIG_USB_SERIAL_ARK3116 is not set
++# CONFIG_USB_SERIAL_BELKIN is not set
++# CONFIG_USB_SERIAL_WHITEHEAT is not set
++# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
++# CONFIG_USB_SERIAL_CP2101 is not set
++# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
++# CONFIG_USB_SERIAL_EMPEG is not set
++CONFIG_USB_SERIAL_FTDI_SIO=m
++# CONFIG_USB_SERIAL_FUNSOFT is not set
++# CONFIG_USB_SERIAL_VISOR is not set
++# CONFIG_USB_SERIAL_IPAQ is not set
++# CONFIG_USB_SERIAL_IR is not set
++# CONFIG_USB_SERIAL_EDGEPORT is not set
++# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
++# CONFIG_USB_SERIAL_GARMIN is not set
++# CONFIG_USB_SERIAL_IPW is not set
++# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
++# CONFIG_USB_SERIAL_KEYSPAN is not set
++# CONFIG_USB_SERIAL_KLSI is not set
++# CONFIG_USB_SERIAL_KOBIL_SCT is not set
++# CONFIG_USB_SERIAL_MCT_U232 is not set
++# CONFIG_USB_SERIAL_MOS7720 is not set
++# CONFIG_USB_SERIAL_MOS7840 is not set
++# CONFIG_USB_SERIAL_NAVMAN is not set
++# CONFIG_USB_SERIAL_PL2303 is not set
++# CONFIG_USB_SERIAL_HP4X is not set
++# CONFIG_USB_SERIAL_SAFE is not set
++# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
++# CONFIG_USB_SERIAL_TI is not set
++# CONFIG_USB_SERIAL_CYBERJACK is not set
++# CONFIG_USB_SERIAL_XIRCOM is not set
++# CONFIG_USB_SERIAL_OPTION is not set
++# CONFIG_USB_SERIAL_OMNINET is not set
++# CONFIG_USB_SERIAL_DEBUG is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++
++#
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=m
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=m
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
++CONFIG_USB_ZERO=m
++CONFIG_USB_ETH=m
++CONFIG_USB_ETH_RNDIS=y
++CONFIG_USB_GADGETFS=m
++CONFIG_USB_FILE_STORAGE=m
++CONFIG_USB_FILE_STORAGE_TEST=y
++CONFIG_USB_G_SERIAL=m
++# CONFIG_USB_MIDI_GADGET is not set
++
++#
++# MMC/SD Card support
++#
++# CONFIG_MMC is not set
++
++#
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
++
++#
++# File systems
++#
++# CONFIG_EXT2_FS is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_MINIX_FS=y
++# CONFIG_ROMFS_FS is not set
++# CONFIG_INOTIFY is not set
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_YAFFS_FS=y
++CONFIG_YAFFS_YAFFS1=y
++# CONFIG_YAFFS_DOES_ECC is not set
++CONFIG_YAFFS_YAFFS2=y
++CONFIG_YAFFS_AUTO_YAFFS2=y
++# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
++CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
++# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
++# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
++CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=m
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++
++#
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_FRAME_POINTER=y
++# CONFIG_DEBUG_USER is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++
++#
++# Cryptographic options
++#
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=m
++CONFIG_CRYPTO_BLKCIPHER=m
++CONFIG_CRYPTO_MANAGER=m
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=m
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++CONFIG_CRYPTO_AES=m
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++CONFIG_CRYPTO_ARC4=m
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++CONFIG_CRYPTO_MICHAEL_MIC=m
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Hardware crypto devices
++#
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++CONFIG_CRC32=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/kafa_defconfig linux-2.6/arch/arm/configs/kafa_defconfig
+--- linux-2.6.24/arch/arm/configs/kafa_defconfig 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/configs/kafa_defconfig 2007-12-31 10:43:35.000000000 +0200
+@@ -587,14 +587,14 @@
+ #
+ # I2C Algorithms
+ #
+-# CONFIG_I2C_ALGOBIT is not set
++CONFIG_I2C_ALGOBIT=y
+ # CONFIG_I2C_ALGOPCF is not set
+ # CONFIG_I2C_ALGOPCA is not set
+
+ #
+ # I2C Hardware Bus support
+ #
+-CONFIG_I2C_AT91=y
++CONFIG_I2C_GPIO=y
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+ # CONFIG_I2C_STUB is not set
+ # CONFIG_I2C_PCA_ISA is not set
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/kb9202_defconfig linux-2.6/arch/arm/configs/kb9202_defconfig
+--- linux-2.6.24/arch/arm/configs/kb9202_defconfig 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/configs/kb9202_defconfig 2007-12-31 10:43:35.000000000 +0200
+@@ -1,19 +1,31 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.13-rc2
+-# Sun Aug 14 19:26:59 2005
++# Linux kernel version: 2.6.21
++# Mon May 7 11:43:14 2007
+ #
+ CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_GENERIC_TIME is not set
+ CONFIG_MMU=y
+-CONFIG_UID16=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
+ CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
+ CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+ #
+ # Code maturity level options
+ #
+-# CONFIG_EXPERIMENTAL is not set
+-CONFIG_CLEAN_COMPILE=y
++CONFIG_EXPERIMENTAL=y
+ CONFIG_BROKEN_ON_SMP=y
+ CONFIG_INIT_ENV_ARG_LIMIT=32
+
+@@ -21,54 +33,103 @@
+ # General setup
+ #
+ CONFIG_LOCALVERSION=""
+-# CONFIG_SWAP is not set
+-# CONFIG_SYSVIPC is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++# CONFIG_BSD_PROCESS_ACCT_V3 is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++CONFIG_AUDIT=y
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+ CONFIG_SYSCTL=y
+-# CONFIG_AUDIT is not set
+-CONFIG_HOTPLUG=y
+-# CONFIG_KOBJECT_UEVENT is not set
+-# CONFIG_IKCONFIG is not set
+ # CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
+ CONFIG_KALLSYMS=y
+ # CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
+ CONFIG_PRINTK=y
+ CONFIG_BUG=y
++CONFIG_ELF_CORE=y
+ CONFIG_BASE_FULL=y
+ CONFIG_FUTEX=y
+ CONFIG_EPOLL=y
+-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+ CONFIG_SHMEM=y
+-CONFIG_CC_ALIGN_FUNCTIONS=0
+-CONFIG_CC_ALIGN_LABELS=0
+-CONFIG_CC_ALIGN_LOOPS=0
+-CONFIG_CC_ALIGN_JUMPS=0
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
+ # CONFIG_TINY_SHMEM is not set
+ CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
+
+ #
+ # Loadable module support
+ #
+ CONFIG_MODULES=y
+ CONFIG_MODULE_UNLOAD=y
+-CONFIG_OBSOLETE_MODPARM=y
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
+ CONFIG_KMOD=y
+
+ #
++# Block layer
++#
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
+ # System Type
+ #
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
+ # CONFIG_ARCH_CLPS7500 is not set
+ # CONFIG_ARCH_CLPS711X is not set
+ # CONFIG_ARCH_CO285 is not set
+ # CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
+ # CONFIG_ARCH_FOOTBRIDGE is not set
+-# CONFIG_ARCH_INTEGRATOR is not set
+-# CONFIG_ARCH_IOP3XX is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IOP13XX is not set
+ # CONFIG_ARCH_IXP4XX is not set
+ # CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP23XX is not set
+ # CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_PNX4008 is not set
+ # CONFIG_ARCH_PXA is not set
+ # CONFIG_ARCH_RPC is not set
+ # CONFIG_ARCH_SA1100 is not set
+@@ -76,34 +137,52 @@
+ # CONFIG_ARCH_SHARK is not set
+ # CONFIG_ARCH_LH7A40X is not set
+ # CONFIG_ARCH_OMAP is not set
+-# CONFIG_ARCH_VERSATILE is not set
+-# CONFIG_ARCH_IMX is not set
+-# CONFIG_ARCH_H720X is not set
+-# CONFIG_ARCH_AAEC2000 is not set
+-CONFIG_ARCH_AT91=y
++
++#
++# Atmel AT91 System-on-Chip
++#
+ CONFIG_ARCH_AT91RM9200=y
++# CONFIG_ARCH_AT91SAM9260 is not set
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
+
+ #
+-# AT91RM9200 Implementations
++# AT91RM9200 Board Type
+ #
++# CONFIG_MACH_ONEARM is not set
+ # CONFIG_ARCH_AT91RM9200DK is not set
+ # CONFIG_MACH_AT91RM9200EK is not set
+ # CONFIG_MACH_CSB337 is not set
+ # CONFIG_MACH_CSB637 is not set
+ # CONFIG_MACH_CARMEVA is not set
++# CONFIG_MACH_ATEB9200 is not set
+ CONFIG_MACH_KB9200=y
++# CONFIG_MACH_KAFA is not set
++# CONFIG_MACH_CHUB is not set
++
++#
++# AT91 Board Options
++#
++
++#
++# AT91 Feature Selections
++#
++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
+
+ #
+ # Processor Type
+ #
+ CONFIG_CPU_32=y
+ CONFIG_CPU_ARM920T=y
+-CONFIG_CPU_32v4=y
++CONFIG_CPU_32v4T=y
+ CONFIG_CPU_ABRT_EV4T=y
+ CONFIG_CPU_CACHE_V4WT=y
+ CONFIG_CPU_CACHE_VIVT=y
+ CONFIG_CPU_COPY_V4WB=y
+ CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
+
+ #
+ # Processor Features
+@@ -112,24 +191,44 @@
+ # CONFIG_CPU_ICACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_DISABLE is not set
+ # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_OUTER_CACHE is not set
+
+ #
+ # Bus support
+ #
+-CONFIG_ISA_DMA_API=y
+
+ #
+ # PCCARD (PCMCIA/CardBus) support
+ #
+-# CONFIG_PCCARD is not set
++CONFIG_PCCARD=m
++# CONFIG_PCMCIA_DEBUG is not set
++CONFIG_PCMCIA=m
++CONFIG_PCMCIA_LOAD_CIS=y
++CONFIG_PCMCIA_IOCTL=y
++
++#
++# PC-card bridges
++#
++# CONFIG_AT91_CF is not set
+
+ #
+ # Kernel Features
+ #
++# CONFIG_PREEMPT is not set
+ # CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
+ # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
+ CONFIG_FLATMEM=y
+ CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
+ # CONFIG_LEDS is not set
+ CONFIG_ALIGNMENT_TRAP=y
+
+@@ -138,8 +237,10 @@
+ #
+ CONFIG_ZBOOT_ROM_TEXT=0x10000000
+ CONFIG_ZBOOT_ROM_BSS=0x20040000
+-CONFIG_ZBOOT_ROM=y
+-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
++# CONFIG_ZBOOT_ROM is not set
++CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
+
+ #
+ # Floating point emulation
+@@ -150,6 +251,7 @@
+ #
+ CONFIG_FPE_NWFPE=y
+ # CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
+
+ #
+ # Userspace binary formats
+@@ -165,6 +267,96 @@
+ # CONFIG_PM is not set
+
+ #
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++CONFIG_IP_SCTP=m
++# CONFIG_SCTP_DBG_MSG is not set
++# CONFIG_SCTP_DBG_OBJCNT is not set
++# CONFIG_SCTP_HMAC_NONE is not set
++# CONFIG_SCTP_HMAC_SHA1 is not set
++CONFIG_SCTP_HMAC_MD5=y
++
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_IEEE80211 is not set
++
++#
+ # Device Drivers
+ #
+
+@@ -173,13 +365,95 @@
+ #
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-CONFIG_DEBUG_DRIVER=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++
++#
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
+
+ #
+ # Memory Technology Devices (MTD)
+ #
+-# CONFIG_MTD is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
++
++#
++# Mapping drivers for chip access
++#
++CONFIG_MTD_COMPLEX_MAPPINGS=y
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++
++#
++# NAND Flash Device Drivers
++#
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_AT91=y
++# CONFIG_MTD_NAND_NANDSIM is not set
++
++#
++# OneNAND Flash Device Drivers
++#
++# CONFIG_MTD_ONENAND is not set
+
+ #
+ # Parallel port support
+@@ -189,6 +463,7 @@
+ #
+ # Plug and Play support
+ #
++# CONFIG_PNPACPI is not set
+
+ #
+ # Block devices
+@@ -196,28 +471,27 @@
+ # CONFIG_BLK_DEV_COW_COMMON is not set
+ CONFIG_BLK_DEV_LOOP=y
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-CONFIG_BLK_DEV_NBD=y
++# CONFIG_BLK_DEV_NBD is not set
+ # CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=4096
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
++CONFIG_BLK_DEV_RAM_SIZE=16384
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+ # CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
+
+ #
+-# IO Schedulers
++# ATA/ATAPI/MFM/RLL support
+ #
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_IDE is not set
+
+ #
+ # SCSI device support
+ #
++# CONFIG_RAID_ATTRS is not set
+ CONFIG_SCSI=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
+ CONFIG_SCSI_PROC_FS=y
+
+ #
+@@ -233,97 +507,61 @@
+ #
+ # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+ #
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
++CONFIG_SCSI_MULTI_LUN=y
++CONFIG_SCSI_CONSTANTS=y
++CONFIG_SCSI_LOGGING=y
++# CONFIG_SCSI_SCAN_ASYNC is not set
+
+ #
+-# SCSI Transport Attributes
++# SCSI Transports
+ #
+-# CONFIG_SCSI_SPI_ATTRS is not set
++CONFIG_SCSI_SPI_ATTRS=m
+ # CONFIG_SCSI_FC_ATTRS is not set
+ # CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
+
+ #
+ # SCSI low-level drivers
+ #
+-# CONFIG_SCSI_SATA is not set
++# CONFIG_ISCSI_TCP is not set
+ # CONFIG_SCSI_DEBUG is not set
+
+ #
+-# Multi-device support (RAID and LVM)
+-#
+-# CONFIG_MD is not set
+-
+-#
+-# Fusion MPT device support
++# PCMCIA SCSI adapter support
+ #
+-# CONFIG_FUSION is not set
++# CONFIG_PCMCIA_AHA152X is not set
++# CONFIG_PCMCIA_FDOMAIN is not set
++# CONFIG_PCMCIA_NINJA_SCSI is not set
++# CONFIG_PCMCIA_QLOGIC is not set
++# CONFIG_PCMCIA_SYM53C500 is not set
+
+ #
+-# IEEE 1394 (FireWire) support
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
+ #
++# CONFIG_ATA is not set
+
+ #
+-# I2O device support
++# Multi-device support (RAID and LVM)
+ #
++# CONFIG_MD is not set
+
+ #
+-# Networking support
++# Fusion MPT device support
+ #
+-CONFIG_NET=y
++# CONFIG_FUSION is not set
+
+ #
+-# Networking options
++# IEEE 1394 (FireWire) support
+ #
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-# CONFIG_IP_PNP_BOOTP is not set
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_IP_TCPDIAG is not set
+-# CONFIG_IP_TCPDIAG_IPV6 is not set
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_BIC=y
+-# CONFIG_IPV6 is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+
+ #
+-# QoS and/or fair queueing
++# I2O device support
+ #
+-# CONFIG_NET_SCHED is not set
+-# CONFIG_NET_CLS_ROUTE is not set
+
+ #
+-# Network testing
++# Network device support
+ #
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+ CONFIG_NETDEVICES=y
+ # CONFIG_DUMMY is not set
+ # CONFIG_BONDING is not set
+@@ -331,6 +569,11 @@
+ # CONFIG_TUN is not set
+
+ #
++# PHY device support
++#
++# CONFIG_PHYLIB is not set
++
++#
+ # Ethernet (10 or 100Mbit)
+ #
+ CONFIG_NET_ETHERNET=y
+@@ -357,11 +600,20 @@
+ # CONFIG_NET_RADIO is not set
+
+ #
++# PCMCIA network device support
++#
++# CONFIG_NET_PCMCIA is not set
++
++#
+ # Wan interfaces
+ #
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
+
+ #
+ # ISDN subsystem
+@@ -372,6 +624,7 @@
+ # Input device support
+ #
+ CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
+
+ #
+ # Userland interfaces
+@@ -397,9 +650,7 @@
+ #
+ # Hardware I/O ports
+ #
+-CONFIG_SERIO=y
+-# CONFIG_SERIO_SERPORT is not set
+-# CONFIG_SERIO_RAW is not set
++# CONFIG_SERIO is not set
+ # CONFIG_GAMEPORT is not set
+
+ #
+@@ -408,6 +659,7 @@
+ CONFIG_VT=y
+ CONFIG_VT_CONSOLE=y
+ CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
+ # CONFIG_SERIAL_NONSTANDARD is not set
+
+ #
+@@ -420,11 +672,11 @@
+ #
+ CONFIG_SERIAL_ATMEL=y
+ CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
+ CONFIG_SERIAL_CORE=y
+ CONFIG_SERIAL_CORE_CONSOLE=y
+ CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_LEGACY_PTYS is not set
+
+ #
+ # IPMI
+@@ -435,21 +687,23 @@
+ # Watchdog Cards
+ #
+ # CONFIG_WATCHDOG is not set
++# CONFIG_HW_RANDOM is not set
+ # CONFIG_NVRAM is not set
+-# CONFIG_RTC is not set
+-# CONFIG_AT91RM9200_RTC is not set
+ # CONFIG_DTLK is not set
+ # CONFIG_R3964 is not set
+
+ #
+-# Ftape, the floppy tape device driver
++# PCMCIA character devices
+ #
++# CONFIG_SYNCLINK_CS is not set
++# CONFIG_CARDMAN_4000 is not set
++# CONFIG_CARDMAN_4040 is not set
+ # CONFIG_RAW_DRIVER is not set
+
+ #
+ # TPM devices
+ #
+-# CONFIG_AT91_SPI is not set
++# CONFIG_TCG_TPM is not set
+
+ #
+ # I2C support
+@@ -457,10 +711,50 @@
+ # CONFIG_I2C is not set
+
+ #
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++
++#
++# Dallas's 1-wire bus
++#
++# CONFIG_W1 is not set
++
++#
++# Hardware Monitoring support
++#
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_ABITUGURU is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_VT1211 is not set
++CONFIG_HWMON_DEBUG_CHIP=y
++
++#
+ # Misc devices
+ #
+
+ #
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
++
++#
++# LED drivers
++#
++
++#
++# LED Triggers
++#
++
++#
+ # Multimedia devices
+ #
+ # CONFIG_VIDEO_DEV is not set
+@@ -469,17 +763,57 @@
+ # Digital Video Broadcasting Devices
+ #
+ # CONFIG_DVB is not set
++# CONFIG_USB_DABUSB is not set
+
+ #
+ # Graphics support
+ #
+-# CONFIG_FB is not set
++CONFIG_BACKLIGHT_LCD_SUPPORT=y
++CONFIG_BACKLIGHT_CLASS_DEVICE=y
++# CONFIG_LCD_CLASS_DEVICE is not set
++CONFIG_BACKLIGHT_KB920x=y
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++CONFIG_FB_MODE_HELPERS=y
++CONFIG_FB_TILEBLITTING=y
++
++#
++# Frame buffer hardware drivers
++#
++CONFIG_FB_S1D15605=y
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_VIRTUAL is not set
+
+ #
+ # Console display driver support
+ #
+ # CONFIG_VGA_CONSOLE is not set
+ CONFIG_DUMMY_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
++CONFIG_FONTS=y
++# CONFIG_FONT_8x8 is not set
++# CONFIG_FONT_8x16 is not set
++# CONFIG_FONT_6x11 is not set
++# CONFIG_FONT_7x14 is not set
++# CONFIG_FONT_PEARL_8x8 is not set
++# CONFIG_FONT_ACORN_8x8 is not set
++CONFIG_FONT_MINI_4x6=y
++# CONFIG_FONT_SUN8x16 is not set
++# CONFIG_FONT_SUN12x22 is not set
++# CONFIG_FONT_10x18 is not set
++
++#
++# Logo configuration
++#
++# CONFIG_LOGO is not set
+
+ #
+ # Sound
+@@ -487,82 +821,98 @@
+ # CONFIG_SOUND is not set
+
+ #
++# HID Devices
++#
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++
++#
+ # USB support
+ #
+ CONFIG_USB_ARCH_HAS_HCD=y
+ CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
+ CONFIG_USB=y
+-CONFIG_USB_DEBUG=y
++# CONFIG_USB_DEBUG is not set
+
+ #
+ # Miscellaneous USB options
+ #
+ CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
+
+ #
+ # USB Host Controller Drivers
+ #
+ # CONFIG_USB_ISP116X_HCD is not set
+ CONFIG_USB_OHCI_HCD=y
+-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+ # CONFIG_USB_SL811_HCD is not set
+
+ #
+ # USB Device Class drivers
+ #
+-# CONFIG_USB_BLUETOOTH_TTY is not set
+ # CONFIG_USB_ACM is not set
+ # CONFIG_USB_PRINTER is not set
+
+ #
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
+ #
+ CONFIG_USB_STORAGE=y
+-CONFIG_USB_STORAGE_DEBUG=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
+ # CONFIG_USB_STORAGE_FREECOM is not set
+ # CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++CONFIG_USB_LIBUSUAL=y
+
+ #
+ # USB Input Devices
+ #
+-# CONFIG_USB_HID is not set
+-
+-#
+-# USB HID Boot Protocol drivers
+-#
+-# CONFIG_USB_KBD is not set
+-# CONFIG_USB_MOUSE is not set
++CONFIG_USB_HID=y
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
++# CONFIG_USB_HIDDEV is not set
+ # CONFIG_USB_AIPTEK is not set
+ # CONFIG_USB_WACOM is not set
+ # CONFIG_USB_ACECAD is not set
+ # CONFIG_USB_KBTAB is not set
+ # CONFIG_USB_POWERMATE is not set
+-# CONFIG_USB_MTOUCH is not set
+-# CONFIG_USB_ITMTOUCH is not set
+-# CONFIG_USB_EGALAX is not set
++# CONFIG_USB_TOUCHSCREEN is not set
++# CONFIG_USB_YEALINK is not set
+ # CONFIG_USB_XPAD is not set
+ # CONFIG_USB_ATI_REMOTE is not set
++# CONFIG_USB_ATI_REMOTE2 is not set
++# CONFIG_USB_KEYSPAN_REMOTE is not set
++# CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_GTCO is not set
+
+ #
+ # USB Imaging devices
+ #
++# CONFIG_USB_MDC800 is not set
+ # CONFIG_USB_MICROTEK is not set
+
+ #
+-# USB Multimedia devices
+-#
+-# CONFIG_USB_DABUSB is not set
+-
+-#
+-# Video4Linux support is needed for USB Multimedia device support
+-#
+-
+-#
+ # USB Network Adapters
+ #
++# CONFIG_USB_CATC is not set
+ # CONFIG_USB_KAWETH is not set
+ # CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
+ # CONFIG_USB_USBNET is not set
+ # CONFIG_USB_MON is not set
+
+@@ -580,12 +930,23 @@
+ #
+ # CONFIG_USB_EMI62 is not set
+ # CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
+ # CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
+ # CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
+ # CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGETKIT is not set
+-# CONFIG_USB_PHIDGETSERVO is not set
++# CONFIG_USB_PHIDGET is not set
+ # CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
+
+ #
+ # USB DSL modem support
+@@ -599,36 +960,51 @@
+ #
+ # MMC/SD Card support
+ #
+-# CONFIG_MMC is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_AT91=y
++
++#
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
+
+ #
+ # File systems
+ #
+ CONFIG_EXT2_FS=y
+ CONFIG_EXT2_FS_XATTR=y
+-# CONFIG_EXT2_FS_POSIX_ACL is not set
+-# CONFIG_EXT2_FS_SECURITY is not set
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT2_FS_SECURITY=y
+ # CONFIG_EXT2_FS_XIP is not set
+ CONFIG_EXT3_FS=y
+ CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
++CONFIG_EXT3_FS_POSIX_ACL=y
++CONFIG_EXT3_FS_SECURITY=y
++# CONFIG_EXT4DEV_FS is not set
+ CONFIG_JBD=y
+ # CONFIG_JBD_DEBUG is not set
+ CONFIG_FS_MBCACHE=y
+ # CONFIG_REISERFS_FS is not set
+ # CONFIG_JFS_FS is not set
+-
+-#
+-# XFS support
+-#
++CONFIG_FS_POSIX_ACL=y
+ # CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
+ # CONFIG_MINIX_FS is not set
+ # CONFIG_ROMFS_FS is not set
+-# CONFIG_QUOTA is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++CONFIG_QUOTA=y
++# CONFIG_QFMT_V1 is not set
++CONFIG_QFMT_V2=y
++CONFIG_QUOTACTL=y
+ CONFIG_DNOTIFY=y
+-CONFIG_AUTOFS_FS=y
++# CONFIG_AUTOFS_FS is not set
+ CONFIG_AUTOFS4_FS=y
++# CONFIG_FUSE_FS is not set
+
+ #
+ # CD-ROM/DVD Filesystems
+@@ -643,25 +1019,40 @@
+ CONFIG_MSDOS_FS=y
+ CONFIG_VFAT_FS=y
+ CONFIG_FAT_DEFAULT_CODEPAGE=437
+-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+ # CONFIG_NTFS_FS is not set
+
+ #
+ # Pseudo filesystems
+ #
+ CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
+ CONFIG_SYSFS=y
+-CONFIG_DEVPTS_FS_XATTR=y
+-# CONFIG_DEVPTS_FS_SECURITY is not set
+ CONFIG_TMPFS=y
+-# CONFIG_TMPFS_XATTR is not set
++# CONFIG_TMPFS_POSIX_ACL is not set
+ # CONFIG_HUGETLB_PAGE is not set
+ CONFIG_RAMFS=y
++CONFIG_CONFIGFS_FS=y
+
+ #
+ # Miscellaneous filesystems
+ #
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
+ # CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_HPFS_FS is not set
+@@ -675,16 +1066,23 @@
+ CONFIG_NFS_FS=y
+ CONFIG_NFS_V3=y
+ # CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
+ # CONFIG_NFSD is not set
+ CONFIG_ROOT_NFS=y
+ CONFIG_LOCKD=y
+ CONFIG_LOCKD_V4=y
+ CONFIG_NFS_COMMON=y
+ CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
+ # CONFIG_SMB_FS is not set
+ # CONFIG_CIFS is not set
+ # CONFIG_NCP_FS is not set
+ # CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
+
+ #
+ # Partition Types
+@@ -734,26 +1132,51 @@
+ # CONFIG_NLS_ISO8859_15 is not set
+ # CONFIG_NLS_KOI8_R is not set
+ # CONFIG_NLS_KOI8_U is not set
+-# CONFIG_NLS_UTF8 is not set
++CONFIG_NLS_UTF8=y
++
++#
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
+
+ #
+ # Kernel hacking
+ #
+ # CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
+ CONFIG_DEBUG_KERNEL=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_LOG_BUF_SHIFT=17
++CONFIG_DETECT_SOFTLOCKUP=y
+ # CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
+ # CONFIG_DEBUG_SLAB is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++CONFIG_DEBUG_SPINLOCK=y
++# CONFIG_DEBUG_MUTEXES is not set
++CONFIG_DEBUG_SPINLOCK_SLEEP=y
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+ # CONFIG_DEBUG_KOBJECT is not set
+ CONFIG_DEBUG_BUGVERBOSE=y
+ # CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_FS is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
+ CONFIG_FRAME_POINTER=y
+-CONFIG_DEBUG_USER=y
+-CONFIG_DEBUG_ERRORS=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_DEBUG_USER is not set
++# CONFIG_DEBUG_ERRORS is not set
+ CONFIG_DEBUG_LL=y
+ # CONFIG_DEBUG_ICEDCC is not set
+
+@@ -766,7 +1189,43 @@
+ #
+ # Cryptographic options
+ #
+-# CONFIG_CRYPTO is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_HASH=m
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=m
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
+
+ #
+ # Hardware crypto devices
+@@ -775,6 +1234,14 @@
+ #
+ # Library routines
+ #
++CONFIG_BITREVERSE=y
+ # CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
+ CONFIG_CRC32=y
+ # CONFIG_LIBCRC32C is not set
++CONFIG_AUDIT_GENERIC=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/picotux200_defconfig linux-2.6/arch/arm/configs/picotux200_defconfig
+--- linux-2.6.24/arch/arm/configs/picotux200_defconfig 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/configs/picotux200_defconfig 2007-12-31 10:43:35.000000000 +0200
+@@ -727,14 +727,14 @@
+ #
+ # I2C Algorithms
+ #
+-# CONFIG_I2C_ALGOBIT is not set
++CONFIG_I2C_ALGOBIT=m
+ # CONFIG_I2C_ALGOPCF is not set
+ # CONFIG_I2C_ALGOPCA is not set
+
+ #
+ # I2C Hardware Bus support
+ #
+-CONFIG_I2C_AT91=m
++CONFIG_I2C_GPIO=m
+ # CONFIG_I2C_OCORES is not set
+ # CONFIG_I2C_PARPORT_LIGHT is not set
+ # CONFIG_I2C_STUB is not set
+diff -urN -x CVS linux-2.6.24/arch/arm/configs/sam9_l9260_defconfig linux-2.6/arch/arm/configs/sam9_l9260_defconfig
+--- linux-2.6.24/arch/arm/configs/sam9_l9260_defconfig 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/configs/sam9_l9260_defconfig 2007-12-31 15:18:42.000000000 +0200
+@@ -0,0 +1,1098 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.23
++# Sun Oct 14 02:01:07 2007
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++# CONFIG_GENERIC_TIME is not set
++# CONFIG_GENERIC_CLOCKEVENTS is not set
++CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ZONE_DMA=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_LOCK_KERNEL=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++CONFIG_AUDIT=y
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=15
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++CONFIG_LSF=y
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++CONFIG_ARCH_AT91=y
++# CONFIG_ARCH_CLPS7500 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_CO285 is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++
++#
++# Boot options
++#
++
++#
++# Power management
++#
++
++#
++# Atmel AT91 System-on-Chip
++#
++# CONFIG_ARCH_AT91RM9200 is not set
++CONFIG_ARCH_AT91SAM9260=y
++# CONFIG_ARCH_AT91SAM9261 is not set
++# CONFIG_ARCH_AT91SAM9263 is not set
++# CONFIG_ARCH_AT91SAM9RL is not set
++
++#
++# AT91SAM9260 Variants
++#
++# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
++
++#
++# AT91SAM9260 / AT91SAM9XE Board Type
++#
++# CONFIG_MACH_AT91SAM9260EK is not set
++# CONFIG_MACH_CAM60 is not set
++CONFIG_MACH_SAM9_L9260=y
++
++#
++# AT91 Board Options
++#
++CONFIG_MTD_AT91_DATAFLASH_CARD=y
++
++#
++# AT91 Feature Selections
++#
++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
++# CONFIG_ATMEL_TCLIB is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++# CONFIG_TICK_ONESHOT is not set
++CONFIG_PREEMPT=y
++# CONFIG_NO_IDLE_HZ is not set
++CONFIG_HZ=100
++# CONFIG_AEABI is not set
++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_LEDS=y
++CONFIG_LEDS_TIMER=y
++CONFIG_LEDS_CPU=y
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++# CONFIG_VFP is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_ARTHUR is not set
++
++#
++# Power management options
++#
++# CONFIG_PM is not set
++CONFIG_SUSPEND_UP_POSSIBLE=y
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=y
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++# CONFIG_IP_PNP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++# CONFIG_MTD_AFS_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++CONFIG_MTD_BLOCK2MTD=y
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++CONFIG_MTD_NAND_AT91=y
++# CONFIG_MTD_NAND_NANDSIM is not set
++CONFIG_MTD_NAND_PLATFORM=y
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++CONFIG_MTD_UBI=y
++CONFIG_MTD_UBI_WL_THRESHOLD=4096
++CONFIG_MTD_UBI_BEB_RESERVE=3
++CONFIG_MTD_UBI_GLUEBI=y
++
++#
++# UBI debugging options
++#
++# CONFIG_MTD_UBI_DEBUG is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=8192
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++
++#
++# SCSI device support
++#
++CONFIG_RAID_ATTRS=y
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=y
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++CONFIG_SCSI_CONSTANTS=y
++CONFIG_SCSI_LOGGING=y
++# CONFIG_SCSI_SCAN_ASYNC is not set
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_FIXED_PHY is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_MACB=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET_MII is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++# CONFIG_SERIAL_ATMEL_TTYAT is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=16
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_WATCHDOG is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_HWMON is not set
++# CONFIG_MISC_DEVICES is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++CONFIG_USB_LIBUSUAL=y
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++# CONFIG_USB_MON is not set
++
++#
++# USB port drivers
++#
++
++#
++# USB Serial Converter support
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++
++#
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++CONFIG_USB_GADGET_AT91=y
++CONFIG_USB_AT91=y
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++# CONFIG_USB_GADGET_DUALSPEED is not set
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=y
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++CONFIG_MMC=y
++CONFIG_MMC_DEBUG=y
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++
++#
++# MMC/SD Host Controller Drivers
++#
++CONFIG_MMC_AT91=y
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# SPI RTC drivers
++#
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++CONFIG_RTC_DRV_DS1553=y
++# CONFIG_RTC_DRV_STK17TA8 is not set
++CONFIG_RTC_DRV_DS1742=y
++CONFIG_RTC_DRV_M48T86=y
++# CONFIG_RTC_DRV_M48T59 is not set
++CONFIG_RTC_DRV_V3020=y
++
++#
++# on-CPU RTC drivers
++#
++
++#
++# DMA Engine support
++#
++# CONFIG_DMA_ENGINE is not set
++
++#
++# DMA Clients
++#
++
++#
++# DMA Devices
++#
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++CONFIG_EXT2_FS_POSIX_ACL=y
++CONFIG_EXT2_FS_SECURITY=y
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++CONFIG_EXT3_FS_POSIX_ACL=y
++CONFIG_EXT3_FS_SECURITY=y
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++CONFIG_FS_POSIX_ACL=y
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++CONFIG_NFS_DIRECTIO=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_737=y
++CONFIG_NLS_CODEPAGE_775=y
++CONFIG_NLS_CODEPAGE_850=y
++CONFIG_NLS_CODEPAGE_852=y
++CONFIG_NLS_CODEPAGE_855=y
++CONFIG_NLS_CODEPAGE_857=y
++CONFIG_NLS_CODEPAGE_860=y
++CONFIG_NLS_CODEPAGE_861=y
++CONFIG_NLS_CODEPAGE_862=y
++CONFIG_NLS_CODEPAGE_863=y
++CONFIG_NLS_CODEPAGE_864=y
++CONFIG_NLS_CODEPAGE_865=y
++CONFIG_NLS_CODEPAGE_866=y
++CONFIG_NLS_CODEPAGE_869=y
++CONFIG_NLS_CODEPAGE_936=y
++CONFIG_NLS_CODEPAGE_950=y
++CONFIG_NLS_CODEPAGE_932=y
++CONFIG_NLS_CODEPAGE_949=y
++CONFIG_NLS_CODEPAGE_874=y
++CONFIG_NLS_ISO8859_8=y
++CONFIG_NLS_CODEPAGE_1250=y
++CONFIG_NLS_CODEPAGE_1251=y
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=y
++CONFIG_NLS_ISO8859_2=y
++CONFIG_NLS_ISO8859_3=y
++CONFIG_NLS_ISO8859_4=y
++CONFIG_NLS_ISO8859_5=y
++CONFIG_NLS_ISO8859_6=y
++CONFIG_NLS_ISO8859_7=y
++CONFIG_NLS_ISO8859_9=y
++CONFIG_NLS_ISO8859_13=y
++CONFIG_NLS_ISO8859_14=y
++CONFIG_NLS_ISO8859_15=y
++CONFIG_NLS_KOI8_R=y
++CONFIG_NLS_KOI8_U=y
++CONFIG_NLS_UTF8=y
++
++#
++# Distributed Lock Manager
++#
++# CONFIG_DLM is not set
++
++#
++# Profiling support
++#
++# CONFIG_PROFILING is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++CONFIG_UNUSED_SYMBOLS=y
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_SLAB is not set
++CONFIG_DEBUG_PREEMPT=y
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++CONFIG_FRAME_POINTER=y
++CONFIG_FORCED_INLINING=y
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_DEBUG_USER is not set
++# CONFIG_DEBUG_ERRORS is not set
++CONFIG_DEBUG_LL=y
++# CONFIG_DEBUG_ICEDCC is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_CRYPTO is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_AUDIT_GENERIC=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach-at91/Kconfig
+--- linux-2.6.24/arch/arm/mach-at91/Kconfig 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/Kconfig 2008-03-01 19:29:48.000000000 +0200
+@@ -12,15 +12,28 @@
+
+ config ARCH_AT91SAM9260
+ bool "AT91SAM9260 or AT91SAM9XE"
++ select GENERIC_TIME
++ select GENERIC_CLOCKEVENTS
+
+ config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
++ select GENERIC_TIME
++ select GENERIC_CLOCKEVENTS
+
+ config ARCH_AT91SAM9263
+ bool "AT91SAM9263"
++ select GENERIC_TIME
++ select GENERIC_CLOCKEVENTS
+
+ config ARCH_AT91SAM9RL
+ bool "AT91SAM9RL"
++ select GENERIC_TIME
++ select GENERIC_CLOCKEVENTS
++
++config ARCH_AT91CAP9
++ bool "AT91CAP9"
++ select GENERIC_TIME
++ select GENERIC_CLOCKEVENTS
+
+ config ARCH_AT91X40
+ bool "AT91x40"
+@@ -42,7 +55,7 @@
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using Ajeco's 1ARM Single Board Computer.
+- <http://www.ajeco.fi/products.htm>
++ <http://www.ajeco.fi/eng/products_e.htm>
+
+ config ARCH_AT91RM9200DK
+ bool "Atmel AT91RM9200-DK Development board"
+@@ -106,6 +119,32 @@
+ help
+ Select this if you are using Sperry-Sun's KAFA board.
+
++config MACH_CHUB
++ bool "Promwad Chub board"
++ depends on ARCH_AT91RM9200
++ help
++ Select this if you are using Promwad's Chub board.
++
++config MACH_HOMEMATIC
++ bool "eQ-3 HomeMatic"
++ depends on ARCH_AT91RM9200
++ help
++ Select this if you are using eQ-3's HomeMatic device.
++ <http://www.eq-3.com>
++
++config MACH_ECBAT91
++ bool "emQbit ECB_AT91 SBC"
++ depends on ARCH_AT91RM9200
++ help
++ Select this if you are using emQbit's ECB_AT91 board.
++ <http://wiki.emqbit.com/free-ecb-at91>
++
++config MACH_SWEDATMS
++ bool "Sweda TMS Board"
++ depends on ARCH_AT91RM9200
++ help
++ Select this if you are using Sweda TMS-100 board.
++
+ endif
+
+ # ----------------------------------------------------------
+@@ -130,6 +169,20 @@
+ Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
++config MACH_CAM60
++ bool "KwikByte CAM60 board"
++ depends on ARCH_AT91SAM9260
++ help
++ Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260.
++ <http://www.kwikbyte.com>
++
++config MACH_SAM9_L9260
++ bool "Olimex SAM9-L9260 board"
++ depends on ARCH_AT91SAM9260
++ help
++ Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
++ http://www.olimex.com/dev/sam9-L9260.html
++
+ endif
+
+ # ----------------------------------------------------------
+@@ -178,6 +231,21 @@
+
+ # ----------------------------------------------------------
+
++if ARCH_AT91CAP9
++
++comment "AT91CAP9 Board Type"
++
++config MACH_AT91CAP9ADK
++ bool "Atmel AT91CAP9A-DK Evaluation Kit"
++ depends on ARCH_AT91CAP9
++ help
++ Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
++ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
++
++endif
++
++# ----------------------------------------------------------
++
+ if ARCH_AT91X40
+
+ comment "AT91X40 Board Type"
+@@ -198,13 +266,13 @@
+
+ config MTD_AT91_DATAFLASH_CARD
+ bool "Enable DataFlash Card support"
+- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
++ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK)
+ help
+ Enable support for the DataFlash card.
+
+ config MTD_NAND_AT91_BUSWIDTH_16
+ bool "Enable 16-bit data bus interface to NAND flash"
+- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
++ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
+ help
+ On AT91SAM926x boards both types of NAND flash can be present
+ (8 and 16 bit data bus width).
+@@ -219,6 +287,65 @@
+ Select this if you need to program one or more of the PCK0..PCK3
+ programmable clock outputs.
+
++config AT91_SLOW_CLOCK
++ bool "Suspend-to-RAM disables main oscillator"
++ depends on SUSPEND
++ help
++ Select this if you want Suspend-to-RAM to save the most power
++ possible (without powering off the CPU) by disabling the PLLs
++ and main oscillator so that only the 32 KiHz clock is available.
++
++ When only that slow-clock is available, some peripherals lose
++ functionality. Many can't issue wakeup events unless faster
++ clocks are available. Some lose their operating state and
++ need to be completely re-initialized.
++
++config AT91_TIMER_HZ
++ int "Kernel HZ (jiffies per second)"
++ range 32 1024
++ depends on ARCH_AT91
++ default "128" if ARCH_AT91RM9200
++ default "100"
++ help
++ On AT91rm9200 chips where you're using a system clock derived
++ from the 32768 Hz hardware clock, this tick rate should divide
++ it exactly: use a power-of-two value, such as 128 or 256, to
++ reduce timing errors caused by rounding.
++
++ On AT91sam926x chips, or otherwise using a higher precision
++ system clock (of at least several MHz), rounding is less of a
++ problem so it can be safer to use a decimal values like 100.
++
++choice
++ prompt "Select a UART for early kernel messages"
++
++config AT91_EARLY_DBGU
++ bool "DBGU"
++
++config AT91_EARLY_USART0
++ bool "USART0"
++
++config AT91_EARLY_USART1
++ bool "USART1"
++
++config AT91_EARLY_USART2
++ bool "USART2"
++ depends on ! ARCH_AT91X40
++
++config AT91_EARLY_USART3
++ bool "USART3"
++ depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260)
++
++config AT91_EARLY_USART4
++ bool "USART4"
++ depends on ARCH_AT91SAM9260
++
++config AT91_EARLY_USART5
++ bool "USART5"
++ depends on ARCH_AT91SAM9260
++
++endchoice
++
+ endmenu
+
+ endif
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/Makefile linux-2.6/arch/arm/mach-at91/Makefile
+--- linux-2.6.24/arch/arm/mach-at91/Makefile 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/Makefile 2008-03-01 18:45:33.000000000 +0200
+@@ -8,7 +8,6 @@
+ obj- :=
+
+ obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
+-obj-$(CONFIG_PM) += pm.o
+
+ # CPU-specific support
+ obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
+@@ -16,6 +15,7 @@
+ obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
+ obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
+ obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
++obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o
+ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
+
+ # AT91RM9200 board-specific support
+@@ -28,11 +28,16 @@
+ obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
+ obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
+ obj-$(CONFIG_MACH_KAFA) += board-kafa.o
++obj-$(CONFIG_MACH_CHUB) += board-chub.o
+ obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
+-obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
++obj-$(CONFIG_MACH_HOMEMATIC) += board-homematic.o
++obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
++obj-$(CONFIG_MACH_SWEDATMS) += board-tms.o
+
+ # AT91SAM9260 board-specific support
+ obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
++obj-$(CONFIG_MACH_CAM60) += board-cam60.o
++obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
+
+ # AT91SAM9261 board-specific support
+ obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+@@ -43,19 +48,19 @@
+ # AT91SAM9RL board-specific support
+ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
+
+-# LEDs support
+-led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
+-led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
+-led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
+-led-$(CONFIG_MACH_CSB337) += leds.o
+-led-$(CONFIG_MACH_CSB637) += leds.o
+-led-$(CONFIG_MACH_KB9200) += leds.o
+-led-$(CONFIG_MACH_KAFA) += leds.o
+-obj-$(CONFIG_LEDS) += $(led-y)
++# AT91CAP9 board-specific support
++obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
+
+-# VGA support
+-#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
++# AT91X40 board-specific support
++obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
+
++# Drivers
++obj-y += leds.o
++obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
++
++# Power Management
++obj-$(CONFIG_PM) += pm.o
++obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
+
+ ifeq ($(CONFIG_PM_DEBUG),y)
+ CFLAGS_pm.o += -DDEBUG
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/Makefile.boot linux-2.6/arch/arm/mach-at91/Makefile.boot
+--- linux-2.6.24/arch/arm/mach-at91/Makefile.boot 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/Makefile.boot 2008-01-16 20:26:54.000000000 +0200
+@@ -3,7 +3,12 @@
+ # PARAMS_PHYS must be within 4MB of ZRELADDR
+ # INITRD_PHYS must be in RAM
+
++ifeq ($(CONFIG_ARCH_AT91CAP9),y)
++ zreladdr-y := 0x70008000
++params_phys-y := 0x70000100
++initrd_phys-y := 0x70410000
++else
+ zreladdr-y := 0x20008000
+ params_phys-y := 0x20000100
+ initrd_phys-y := 0x20410000
+-
++endif
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91cap9.c linux-2.6/arch/arm/mach-at91/at91cap9.c
+--- linux-2.6.24/arch/arm/mach-at91/at91cap9.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91cap9.c 2008-03-01 19:34:19.000000000 +0200
+@@ -0,0 +1,374 @@
++/*
++ * arch/arm/mach-at91/at91cap9.c
++ *
++ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
++ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
++ * Copyright (C) 2007 Atmel Corporation.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/pm.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/arch/at91cap9.h>
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/at91_rstc.h>
++#include <asm/arch/at91_shdwc.h>
++
++#include "generic.h"
++#include "clock.h"
++
++static struct map_desc at91cap9_io_desc[] __initdata = {
++ {
++ .virtual = AT91_VA_BASE_SYS,
++ .pfn = __phys_to_pfn(AT91_BASE_SYS),
++ .length = SZ_16K,
++ .type = MT_DEVICE,
++ }, {
++ .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE,
++ .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE),
++ .length = AT91CAP9_SRAM_SIZE,
++ .type = MT_DEVICE,
++ },
++};
++
++/* --------------------------------------------------------------------
++ * Clocks
++ * -------------------------------------------------------------------- */
++
++/*
++ * The peripheral clocks.
++ */
++static struct clk pioABCD_clk = {
++ .name = "pioABCD_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_PIOABCD,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk mpb0_clk = {
++ .name = "mpb0_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_MPB0,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk mpb1_clk = {
++ .name = "mpb1_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_MPB1,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk mpb2_clk = {
++ .name = "mpb2_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_MPB2,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk mpb3_clk = {
++ .name = "mpb3_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_MPB3,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk mpb4_clk = {
++ .name = "mpb4_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_MPB4,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart0_clk = {
++ .name = "usart0_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_US0,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart1_clk = {
++ .name = "usart1_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_US1,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk usart2_clk = {
++ .name = "usart2_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_US2,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk mmc0_clk = {
++ .name = "mci0_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_MCI0,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk mmc1_clk = {
++ .name = "mci1_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_MCI1,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk can_clk = {
++ .name = "can_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_CAN,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk twi_clk = {
++ .name = "twi_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_TWI,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk spi0_clk = {
++ .name = "spi0_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_SPI0,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk spi1_clk = {
++ .name = "spi1_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_SPI1,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk ssc0_clk = {
++ .name = "ssc0_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_SSC0,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk ssc1_clk = {
++ .name = "ssc1_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_SSC1,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk ac97_clk = {
++ .name = "ac97_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_AC97C,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk tcb_clk = {
++ .name = "tcb_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_TCB,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk pwmc_clk = {
++ .name = "pwmc_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_PWMC,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk macb_clk = {
++ .name = "macb_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_EMAC,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk aestdes_clk = {
++ .name = "aestdes_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_AESTDES,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk adc_clk = {
++ .name = "adc_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_ADC,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk isi_clk = {
++ .name = "isi_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_ISI,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk lcdc_clk = {
++ .name = "lcdc_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_LCDC,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk dma_clk = {
++ .name = "dma_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_DMA,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk udphs_clk = {
++ .name = "udphs_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_UDPHS,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++static struct clk ohci_clk = {
++ .name = "ohci_clk",
++ .pmc_mask = 1 << AT91CAP9_ID_UHP,
++ .type = CLK_TYPE_PERIPHERAL,
++};
++
++static struct clk *periph_clocks[] __initdata = {
++ &pioABCD_clk,
++ &mpb0_clk,
++ &mpb1_clk,
++ &mpb2_clk,
++ &mpb3_clk,
++ &mpb4_clk,
++ &usart0_clk,
++ &usart1_clk,
++ &usart2_clk,
++ &mmc0_clk,
++ &mmc1_clk,
++ &can_clk,
++ &twi_clk,
++ &spi0_clk,
++ &spi1_clk,
++ &ssc0_clk,
++ &ssc1_clk,
++ &ac97_clk,
++ &tcb_clk,
++ &pwmc_clk,
++ &macb_clk,
++ &aestdes_clk,
++ &adc_clk,
++ &isi_clk,
++ &lcdc_clk,
++ &dma_clk,
++ &udphs_clk,
++ &ohci_clk,
++ // irq0 .. irq1
++};
++
++/*
++ * The four programmable clocks.
++ * You must configure pin multiplexing to bring these signals out.
++ */
++static struct clk pck0 = {
++ .name = "pck0",
++ .pmc_mask = AT91_PMC_PCK0,
++ .type = CLK_TYPE_PROGRAMMABLE,
++ .id = 0,
++};
++static struct clk pck1 = {
++ .name = "pck1",
++ .pmc_mask = AT91_PMC_PCK1,
++ .type = CLK_TYPE_PROGRAMMABLE,
++ .id = 1,
++};
++static struct clk pck2 = {
++ .name = "pck2",
++ .pmc_mask = AT91_PMC_PCK2,
++ .type = CLK_TYPE_PROGRAMMABLE,
++ .id = 2,
++};
++static struct clk pck3 = {
++ .name = "pck3",
++ .pmc_mask = AT91_PMC_PCK3,
++ .type = CLK_TYPE_PROGRAMMABLE,
++ .id = 3,
++};
++
++static void __init at91cap9_register_clocks(void)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
++ clk_register(periph_clocks[i]);
++
++ clk_register(&pck0);
++ clk_register(&pck1);
++ clk_register(&pck2);
++ clk_register(&pck3);
++}
++
++/* --------------------------------------------------------------------
++ * GPIO
++ * -------------------------------------------------------------------- */
++
++static struct at91_gpio_bank at91cap9_gpio[] = {
++ {
++ .id = AT91CAP9_ID_PIOABCD,
++ .offset = AT91_PIOA,
++ .clock = &pioABCD_clk,
++ }, {
++ .id = AT91CAP9_ID_PIOABCD,
++ .offset = AT91_PIOB,
++ .clock = &pioABCD_clk,
++ }, {
++ .id = AT91CAP9_ID_PIOABCD,
++ .offset = AT91_PIOC,
++ .clock = &pioABCD_clk,
++ }, {
++ .id = AT91CAP9_ID_PIOABCD,
++ .offset = AT91_PIOD,
++ .clock = &pioABCD_clk,
++ }
++};
++
++static void at91cap9_reset(void)
++{
++ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
++}
++
++static void at91cap9_poweroff(void)
++{
++ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
++}
++
++
++/* --------------------------------------------------------------------
++ * AT91CAP9 processor initialization
++ * -------------------------------------------------------------------- */
++
++void __init at91cap9_initialize(unsigned long main_clock)
++{
++ /* Map peripherals */
++ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
++
++ at91_arch_reset = at91cap9_reset;
++ pm_power_off = at91cap9_poweroff;
++ at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
++
++ /* Init clock subsystem */
++ at91_clock_init(main_clock);
++
++ /* Register the processor-specific clocks */
++ at91cap9_register_clocks();
++
++ /* Register GPIO subsystem */
++ at91_gpio_init(at91cap9_gpio, 4);
++}
++
++/* --------------------------------------------------------------------
++ * Interrupt initialization
++ * -------------------------------------------------------------------- */
++
++/*
++ * The default interrupt priority levels (0 = lowest, 7 = highest).
++ */
++static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
++ 7, /* Advanced Interrupt Controller (FIQ) */
++ 7, /* System Peripherals */
++ 1, /* Parallel IO Controller A, B, C and D */
++ 0, /* MP Block Peripheral 0 */
++ 0, /* MP Block Peripheral 1 */
++ 0, /* MP Block Peripheral 2 */
++ 0, /* MP Block Peripheral 3 */
++ 0, /* MP Block Peripheral 4 */
++ 5, /* USART 0 */
++ 5, /* USART 1 */
++ 5, /* USART 2 */
++ 0, /* Multimedia Card Interface 0 */
++ 0, /* Multimedia Card Interface 1 */
++ 3, /* CAN */
++ 6, /* Two-Wire Interface */
++ 5, /* Serial Peripheral Interface 0 */
++ 5, /* Serial Peripheral Interface 1 */
++ 4, /* Serial Synchronous Controller 0 */
++ 4, /* Serial Synchronous Controller 1 */
++ 5, /* AC97 Controller */
++ 0, /* Timer Counter 0, 1 and 2 */
++ 0, /* Pulse Width Modulation Controller */
++ 3, /* Ethernet */
++ 0, /* Advanced Encryption Standard, Triple DES*/
++ 0, /* Analog-to-Digital Converter */
++ 0, /* Image Sensor Interface */
++ 3, /* LCD Controller */
++ 0, /* DMA Controller */
++ 2, /* USB Device Port */
++ 2, /* USB Host port */
++ 0, /* Advanced Interrupt Controller (IRQ0) */
++ 0, /* Advanced Interrupt Controller (IRQ1) */
++};
++
++void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
++{
++ if (!priority)
++ priority = at91cap9_default_irq_priority;
++
++ /* Initialize the AIC interrupt controller */
++ at91_aic_init(priority);
++
++ /* Enable GPIO interrupts */
++ at91_gpio_irq_setup();
++}
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/arch/arm/mach-at91/at91cap9_devices.c
+--- linux-2.6.24/arch/arm/mach-at91/at91cap9_devices.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91cap9_devices.c 2008-03-01 20:41:49.000000000 +0200
+@@ -0,0 +1,1119 @@
++/*
++ * arch/arm/mach-at91/at91cap9_devices.c
++ *
++ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
++ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
++ * Copyright (C) 2007 Atmel Corporation.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++
++#include <linux/dma-mapping.h>
++#include <linux/platform_device.h>
++#include <linux/i2c-gpio.h>
++
++#include <video/atmel_lcdc.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91cap9.h>
++#include <asm/arch/at91sam926x_smc.h>
++#include <asm/arch/at91cap9_matrix.h>
++
++#include "generic.h"
++
++
++/* --------------------------------------------------------------------
++ * USB Host
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
++static u64 ohci_dmamask = DMA_BIT_MASK(32);
++static struct at91_usbh_data usbh_data;
++
++static struct resource usbh_resources[] = {
++ [0] = {
++ .start = AT91CAP9_UHP_BASE,
++ .end = AT91CAP9_UHP_BASE + SZ_1M - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_UHP,
++ .end = AT91CAP9_ID_UHP,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91_usbh_device = {
++ .name = "at91_ohci",
++ .id = -1,
++ .dev = {
++ .dma_mask = &ohci_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &usbh_data,
++ },
++ .resource = usbh_resources,
++ .num_resources = ARRAY_SIZE(usbh_resources),
++};
++
++void __init at91_add_device_usbh(struct at91_usbh_data *data)
++{
++ int i;
++
++ if (!data)
++ return;
++
++ /* Enable VBus control for UHP ports */
++ for (i = 0; i < data->ports; i++) {
++ if (data->vbus_pin[i])
++ at91_set_gpio_output(data->vbus_pin[i], 0);
++ }
++
++ usbh_data = *data;
++ platform_device_register(&at91_usbh_device);
++}
++#else
++void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * Ethernet
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
++static u64 eth_dmamask = DMA_BIT_MASK(32);
++static struct at91_eth_data eth_data;
++
++static struct resource eth_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_EMAC,
++ .end = AT91CAP9_BASE_EMAC + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_EMAC,
++ .end = AT91CAP9_ID_EMAC,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91cap9_eth_device = {
++ .name = "macb",
++ .id = -1,
++ .dev = {
++ .dma_mask = &eth_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &eth_data,
++ },
++ .resource = eth_resources,
++ .num_resources = ARRAY_SIZE(eth_resources),
++};
++
++void __init at91_add_device_eth(struct at91_eth_data *data)
++{
++ if (!data)
++ return;
++
++ if (data->phy_irq_pin) {
++ at91_set_gpio_input(data->phy_irq_pin, 0);
++ at91_set_deglitch(data->phy_irq_pin, 1);
++ }
++
++ /* Pins used for MII and RMII */
++ at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
++ at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
++ at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
++ at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
++ at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
++ at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
++ at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
++ at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
++ at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
++ at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
++
++ if (!data->is_rmii) {
++ at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
++ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
++ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
++ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
++ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
++ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
++ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
++ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
++ }
++
++ eth_data = *data;
++ platform_device_register(&at91cap9_eth_device);
++}
++#else
++void __init at91_add_device_eth(struct at91_eth_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * MMC / SD
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
++static u64 mmc_dmamask = DMA_BIT_MASK(32);
++static struct at91_mmc_data mmc0_data, mmc1_data;
++
++static struct resource mmc0_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_MCI0,
++ .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_MCI0,
++ .end = AT91CAP9_ID_MCI0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91cap9_mmc0_device = {
++ .name = "at91_mci",
++ .id = 0,
++ .dev = {
++ .dma_mask = &mmc_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &mmc0_data,
++ },
++ .resource = mmc0_resources,
++ .num_resources = ARRAY_SIZE(mmc0_resources),
++};
++
++static struct resource mmc1_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_MCI1,
++ .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_MCI1,
++ .end = AT91CAP9_ID_MCI1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91cap9_mmc1_device = {
++ .name = "at91_mci",
++ .id = 1,
++ .dev = {
++ .dma_mask = &mmc_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &mmc1_data,
++ },
++ .resource = mmc1_resources,
++ .num_resources = ARRAY_SIZE(mmc1_resources),
++};
++
++void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
++{
++ if (!data)
++ return;
++
++ /* input/irq */
++ if (data->det_pin) {
++ at91_set_gpio_input(data->det_pin, 1);
++ at91_set_deglitch(data->det_pin, 1);
++ }
++ if (data->wp_pin)
++ at91_set_gpio_input(data->wp_pin, 1);
++ if (data->vcc_pin)
++ at91_set_gpio_output(data->vcc_pin, 0);
++
++ if (mmc_id == 0) { /* MCI0 */
++ /* CLK */
++ at91_set_A_periph(AT91_PIN_PA2, 0);
++
++ /* CMD */
++ at91_set_A_periph(AT91_PIN_PA1, 1);
++
++ /* DAT0, maybe DAT1..DAT3 */
++ at91_set_A_periph(AT91_PIN_PA0, 1);
++ if (data->wire4) {
++ at91_set_A_periph(AT91_PIN_PA3, 1);
++ at91_set_A_periph(AT91_PIN_PA4, 1);
++ at91_set_A_periph(AT91_PIN_PA5, 1);
++ }
++
++ mmc0_data = *data;
++ at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk");
++ platform_device_register(&at91cap9_mmc0_device);
++ } else { /* MCI1 */
++ /* CLK */
++ at91_set_A_periph(AT91_PIN_PA16, 0);
++
++ /* CMD */
++ at91_set_A_periph(AT91_PIN_PA17, 1);
++
++ /* DAT0, maybe DAT1..DAT3 */
++ at91_set_A_periph(AT91_PIN_PA18, 1);
++ if (data->wire4) {
++ at91_set_A_periph(AT91_PIN_PA19, 1);
++ at91_set_A_periph(AT91_PIN_PA20, 1);
++ at91_set_A_periph(AT91_PIN_PA21, 1);
++ }
++
++ mmc1_data = *data;
++ at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
++ platform_device_register(&at91cap9_mmc1_device);
++ }
++}
++#else
++void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * NAND / SmartMedia
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
++static struct at91_nand_data nand_data;
++
++#define NAND_BASE AT91_CHIPSELECT_3
++
++static struct resource nand_resources[] = {
++ [0] = {
++ .start = NAND_BASE,
++ .end = NAND_BASE + SZ_256M - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91_BASE_SYS + AT91_ECC,
++ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device at91cap9_nand_device = {
++ .name = "at91_nand",
++ .id = -1,
++ .dev = {
++ .platform_data = &nand_data,
++ },
++ .resource = nand_resources,
++ .num_resources = ARRAY_SIZE(nand_resources),
++};
++
++void __init at91_add_device_nand(struct at91_nand_data *data)
++{
++ unsigned long csa, mode;
++
++ if (!data)
++ return;
++
++ csa = at91_sys_read(AT91_MATRIX_EBICSA);
++ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
++
++ /* set the bus interface characteristics */
++ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1)
++ | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
++
++ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6)
++ | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
++
++ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
++
++ if (data->bus_width_16)
++ mode = AT91_SMC_DBW_16;
++ else
++ mode = AT91_SMC_DBW_8;
++ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
++
++ /* enable pin */
++ if (data->enable_pin)
++ at91_set_gpio_output(data->enable_pin, 1);
++
++ /* ready/busy pin */
++ if (data->rdy_pin)
++ at91_set_gpio_input(data->rdy_pin, 1);
++
++ /* card detect pin */
++ if (data->det_pin)
++ at91_set_gpio_input(data->det_pin, 1);
++
++ nand_data = *data;
++ platform_device_register(&at91cap9_nand_device);
++}
++#else
++void __init at91_add_device_nand(struct at91_nand_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * TWI (i2c)
++ * -------------------------------------------------------------------- */
++
++/*
++ * Prefer the GPIO code since the TWI controller isn't robust
++ * (gets overruns and underruns under load) and can only issue
++ * repeated STARTs in one scenario (the driver doesn't yet handle them).
++ */
++#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
++
++static struct i2c_gpio_platform_data pdata = {
++ .sda_pin = AT91_PIN_PB4,
++ .sda_is_open_drain = 1,
++ .scl_pin = AT91_PIN_PB5,
++ .scl_is_open_drain = 1,
++ .udelay = 2, /* ~100 kHz */
++};
++
++static struct platform_device at91cap9_twi_device = {
++ .name = "i2c-gpio",
++ .id = -1,
++ .dev.platform_data = &pdata,
++};
++
++void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
++{
++ at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
++ at91_set_multi_drive(AT91_PIN_PB4, 1);
++
++ at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
++ at91_set_multi_drive(AT91_PIN_PB5, 1);
++
++ i2c_register_board_info(0, devices, nr_devices);
++ platform_device_register(&at91cap9_twi_device);
++}
++
++#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
++
++static struct resource twi_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_TWI,
++ .end = AT91CAP9_BASE_TWI + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_TWI,
++ .end = AT91CAP9_ID_TWI,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91cap9_twi_device = {
++ .name = "at91_i2c",
++ .id = -1,
++ .resource = twi_resources,
++ .num_resources = ARRAY_SIZE(twi_resources),
++};
++
++void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
++{
++ /* pins used for TWI interface */
++ at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */
++ at91_set_multi_drive(AT91_PIN_PB4, 1);
++
++ at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */
++ at91_set_multi_drive(AT91_PIN_PB5, 1);
++
++ i2c_register_board_info(0, devices, nr_devices);
++ platform_device_register(&at91cap9_twi_device);
++}
++#else
++void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
++#endif
++
++/* --------------------------------------------------------------------
++ * SPI
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
++static u64 spi_dmamask = DMA_BIT_MASK(32);
++
++static struct resource spi0_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_SPI0,
++ .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_SPI0,
++ .end = AT91CAP9_ID_SPI0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91cap9_spi0_device = {
++ .name = "atmel_spi",
++ .id = 0,
++ .dev = {
++ .dma_mask = &spi_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = spi0_resources,
++ .num_resources = ARRAY_SIZE(spi0_resources),
++};
++
++static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
++
++static struct resource spi1_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_SPI1,
++ .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_SPI1,
++ .end = AT91CAP9_ID_SPI1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91cap9_spi1_device = {
++ .name = "atmel_spi",
++ .id = 1,
++ .dev = {
++ .dma_mask = &spi_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = spi1_resources,
++ .num_resources = ARRAY_SIZE(spi1_resources),
++};
++
++static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
++
++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
++{
++ int i;
++ unsigned long cs_pin;
++ short enable_spi0 = 0;
++ short enable_spi1 = 0;
++
++ /* Choose SPI chip-selects */
++ for (i = 0; i < nr_devices; i++) {
++ if (devices[i].controller_data)
++ cs_pin = (unsigned long) devices[i].controller_data;
++ else if (devices[i].bus_num == 0)
++ cs_pin = spi0_standard_cs[devices[i].chip_select];
++ else
++ cs_pin = spi1_standard_cs[devices[i].chip_select];
++
++ if (devices[i].bus_num == 0)
++ enable_spi0 = 1;
++ else
++ enable_spi1 = 1;
++
++ /* enable chip-select pin */
++ at91_set_gpio_output(cs_pin, 1);
++
++ /* pass chip-select pin to driver */
++ devices[i].controller_data = (void *) cs_pin;
++ }
++
++ spi_register_board_info(devices, nr_devices);
++
++ /* Configure SPI bus(es) */
++ if (enable_spi0) {
++ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
++ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
++ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
++
++ at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
++ platform_device_register(&at91cap9_spi0_device);
++ }
++ if (enable_spi1) {
++ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
++ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
++ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
++
++ at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
++ platform_device_register(&at91cap9_spi1_device);
++ }
++}
++#else
++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * Timer/Counter block
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_ATMEL_TCLIB
++
++static struct resource tcb_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_TCB0,
++ .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_TCB,
++ .end = AT91CAP9_ID_TCB,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91cap9_tcb_device = {
++ .name = "atmel_tcb",
++ .id = 0,
++ .resource = tcb_resources,
++ .num_resources = ARRAY_SIZE(tcb_resources),
++};
++
++static void __init at91_add_device_tc(void)
++{
++ /* this chip has one clock and irq for all three TC channels */
++ at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
++ platform_device_register(&at91cap9_tcb_device);
++}
++#else
++static void __init at91_add_device_tc(void) { }
++#endif
++
++/* --------------------------------------------------------------------
++ * RTT
++ * -------------------------------------------------------------------- */
++
++static struct resource rtt_resources[] = {
++ {
++ .start = AT91_BASE_SYS + AT91_RTT,
++ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device at91cap9_rtt_device = {
++ .name = "at91_rtt",
++ .id = -1,
++ .resource = rtt_resources,
++ .num_resources = ARRAY_SIZE(rtt_resources),
++};
++
++static void __init at91_add_device_rtt(void)
++{
++ device_init_wakeup(&at91cap9_rtt_device.dev, 1);
++ platform_device_register(&at91cap9_rtt_device);
++}
++
++
++/* --------------------------------------------------------------------
++ * Watchdog
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
++static struct platform_device at91cap9_wdt_device = {
++ .name = "at91_wdt",
++ .id = -1,
++ .num_resources = 0,
++};
++
++static void __init at91_add_device_watchdog(void)
++{
++ platform_device_register(&at91cap9_wdt_device);
++}
++#else
++static void __init at91_add_device_watchdog(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * AC97
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
++static u64 ac97_dmamask = DMA_BIT_MASK(32);
++static struct atmel_ac97_data ac97_data;
++
++static struct resource ac97_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_AC97C,
++ .end = AT91CAP9_BASE_AC97C + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_AC97C,
++ .end = AT91CAP9_ID_AC97C,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91cap9_ac97_device = {
++ .name = "ac97c",
++ .id = 1,
++ .dev = {
++ .dma_mask = &ac97_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &ac97_data,
++ },
++ .resource = ac97_resources,
++ .num_resources = ARRAY_SIZE(ac97_resources),
++};
++
++void __init at91_add_device_ac97(struct atmel_ac97_data *data)
++{
++ if (!data)
++ return;
++
++ at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */
++ at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */
++ at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */
++ at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
++
++ /* reset */
++ if (data->reset_pin)
++ at91_set_gpio_output(data->reset_pin, 0);
++
++ ac97_data = *data;
++ platform_device_register(&at91cap9_ac97_device);
++}
++#else
++void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * LCD Controller
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
++static u64 lcdc_dmamask = DMA_BIT_MASK(32);
++static struct atmel_lcdfb_info lcdc_data;
++
++static struct resource lcdc_resources[] = {
++ [0] = {
++ .start = AT91CAP9_LCDC_BASE,
++ .end = AT91CAP9_LCDC_BASE + SZ_4K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_LCDC,
++ .end = AT91CAP9_ID_LCDC,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91_lcdc_device = {
++ .name = "atmel_lcdfb",
++ .id = 0,
++ .dev = {
++ .dma_mask = &lcdc_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &lcdc_data,
++ },
++ .resource = lcdc_resources,
++ .num_resources = ARRAY_SIZE(lcdc_resources),
++};
++
++void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
++{
++ if (!data)
++ return;
++
++ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
++ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
++ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
++ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
++ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
++ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
++ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
++ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
++ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
++ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
++ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
++ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
++ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
++ at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
++ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
++ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
++ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
++ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
++ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
++ at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
++ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
++ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
++
++ lcdc_data = *data;
++ platform_device_register(&at91_lcdc_device);
++}
++#else
++void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * SSC -- Synchronous Serial Controller
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
++static u64 ssc0_dmamask = DMA_BIT_MASK(32);
++
++static struct resource ssc0_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_SSC0,
++ .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_SSC0,
++ .end = AT91CAP9_ID_SSC0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91cap9_ssc0_device = {
++ .name = "ssc",
++ .id = 0,
++ .dev = {
++ .dma_mask = &ssc0_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc0_resources,
++ .num_resources = ARRAY_SIZE(ssc0_resources),
++};
++
++static inline void configure_ssc0_pins(unsigned pins)
++{
++ if (pins & ATMEL_SSC_TF)
++ at91_set_A_periph(AT91_PIN_PB0, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_A_periph(AT91_PIN_PB1, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_A_periph(AT91_PIN_PB2, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_A_periph(AT91_PIN_PB3, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_A_periph(AT91_PIN_PB4, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_A_periph(AT91_PIN_PB5, 1);
++}
++
++static u64 ssc1_dmamask = DMA_BIT_MASK(32);
++
++static struct resource ssc1_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_SSC1,
++ .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_SSC1,
++ .end = AT91CAP9_ID_SSC1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91cap9_ssc1_device = {
++ .name = "ssc",
++ .id = 1,
++ .dev = {
++ .dma_mask = &ssc1_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc1_resources,
++ .num_resources = ARRAY_SIZE(ssc1_resources),
++};
++
++static inline void configure_ssc1_pins(unsigned pins)
++{
++ if (pins & ATMEL_SSC_TF)
++ at91_set_A_periph(AT91_PIN_PB6, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_A_periph(AT91_PIN_PB7, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_A_periph(AT91_PIN_PB8, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_A_periph(AT91_PIN_PB9, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_A_periph(AT91_PIN_PB10, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_A_periph(AT91_PIN_PB11, 1);
++}
++
++/*
++ * SSC controllers are accessed through library code, instead of any
++ * kind of all-singing/all-dancing driver. For example one could be
++ * used by a particular I2S audio codec's driver, while another one
++ * on the same system might be used by a custom data capture driver.
++ */
++void __init at91_add_device_ssc(unsigned id, unsigned pins)
++{
++ struct platform_device *pdev;
++
++ /*
++ * NOTE: caller is responsible for passing information matching
++ * "pins" to whatever will be using each particular controller.
++ */
++ switch (id) {
++ case AT91CAP9_ID_SSC0:
++ pdev = &at91cap9_ssc0_device;
++ configure_ssc0_pins(pins);
++ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
++ break;
++ case AT91CAP9_ID_SSC1:
++ pdev = &at91cap9_ssc1_device;
++ configure_ssc1_pins(pins);
++ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
++ break;
++ default:
++ return;
++ }
++
++ platform_device_register(pdev);
++}
++
++#else
++void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * UART
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_SERIAL_ATMEL)
++static struct resource dbgu_resources[] = {
++ [0] = {
++ .start = AT91_VA_BASE_SYS + AT91_DBGU,
++ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91_ID_SYS,
++ .end = AT91_ID_SYS,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct atmel_uart_data dbgu_data = {
++ .use_dma_tx = 0,
++ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
++ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
++};
++
++static u64 dbgu_dmamask = DMA_BIT_MASK(32);
++
++static struct platform_device at91cap9_dbgu_device = {
++ .name = "atmel_usart",
++ .id = 0,
++ .dev = {
++ .dma_mask = &dbgu_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &dbgu_data,
++ },
++ .resource = dbgu_resources,
++ .num_resources = ARRAY_SIZE(dbgu_resources),
++};
++
++static inline void configure_dbgu_pins(void)
++{
++ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
++ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
++}
++
++static struct resource uart0_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_US0,
++ .end = AT91CAP9_BASE_US0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_US0,
++ .end = AT91CAP9_ID_US0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct atmel_uart_data uart0_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++
++static u64 uart0_dmamask = DMA_BIT_MASK(32);
++
++static struct platform_device at91cap9_uart0_device = {
++ .name = "atmel_usart",
++ .id = 1,
++ .dev = {
++ .dma_mask = &uart0_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart0_data,
++ },
++ .resource = uart0_resources,
++ .num_resources = ARRAY_SIZE(uart0_resources),
++};
++
++static inline void configure_usart0_pins(unsigned pins)
++{
++ at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
++ at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */
++}
++
++static struct resource uart1_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_US1,
++ .end = AT91CAP9_BASE_US1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_US1,
++ .end = AT91CAP9_ID_US1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct atmel_uart_data uart1_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++
++static u64 uart1_dmamask = DMA_BIT_MASK(32);
++
++static struct platform_device at91cap9_uart1_device = {
++ .name = "atmel_usart",
++ .id = 2,
++ .dev = {
++ .dma_mask = &uart1_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart1_data,
++ },
++ .resource = uart1_resources,
++ .num_resources = ARRAY_SIZE(uart1_resources),
++};
++
++static inline void configure_usart1_pins(unsigned pins)
++{
++ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
++ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
++}
++
++static struct resource uart2_resources[] = {
++ [0] = {
++ .start = AT91CAP9_BASE_US2,
++ .end = AT91CAP9_BASE_US2 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91CAP9_ID_US2,
++ .end = AT91CAP9_ID_US2,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct atmel_uart_data uart2_data = {
++ .use_dma_tx = 1,
++ .use_dma_rx = 1,
++};
++
++static u64 uart2_dmamask = DMA_BIT_MASK(32);
++
++static struct platform_device at91cap9_uart2_device = {
++ .name = "atmel_usart",
++ .id = 3,
++ .dev = {
++ .dma_mask = &uart2_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart2_data,
++ },
++ .resource = uart2_resources,
++ .num_resources = ARRAY_SIZE(uart2_resources),
++};
++
++static inline void configure_usart2_pins(unsigned pins)
++{
++ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
++ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
++}
++
++static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
++struct platform_device *atmel_default_console_device; /* the serial console device */
++
++void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0: /* DBGU */
++ pdev = &at91cap9_dbgu_device;
++ configure_dbgu_pins();
++ at91_clock_associate("mck", &pdev->dev, "usart");
++ break;
++ case AT91CAP9_ID_US0:
++ pdev = &at91cap9_uart0_device;
++ configure_usart0_pins(pins);
++ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
++ break;
++ case AT91CAP9_ID_US1:
++ pdev = &at91cap9_uart1_device;
++ configure_usart1_pins(pins);
++ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
++ break;
++ case AT91CAP9_ID_US2:
++ pdev = &at91cap9_uart2_device;
++ configure_usart2_pins(pins);
++ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
++ break;
++ default:
++ return;
++ }
++ pdev->id = portnr; /* update to mapped ID */
++
++ if (portnr < ATMEL_MAX_UART)
++ at91_uarts[portnr] = pdev;
++}
++
++void __init at91_set_serial_console(unsigned portnr)
++{
++ if (portnr < ATMEL_MAX_UART)
++ atmel_default_console_device = at91_uarts[portnr];
++ if (!atmel_default_console_device)
++ printk(KERN_INFO "AT91: No default serial console defined.\n");
++}
++
++void __init at91_add_device_serial(void)
++{
++ int i;
++
++ for (i = 0; i < ATMEL_MAX_UART; i++) {
++ if (at91_uarts[i])
++ platform_device_register(at91_uarts[i]);
++ }
++}
++#else
++void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
++void __init at91_set_serial_console(unsigned portnr) {}
++void __init at91_add_device_serial(void) {}
++#endif
++
++
++/* -------------------------------------------------------------------- */
++/*
++ * These devices are always present and don't need any board-specific
++ * setup.
++ */
++static int __init at91_add_standard_devices(void)
++{
++ at91_add_device_rtt();
++ at91_add_device_watchdog();
++ at91_add_device_tc();
++ return 0;
++}
++
++arch_initcall(at91_add_standard_devices);
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91rm9200.c linux-2.6/arch/arm/mach-at91/at91rm9200.c
+--- linux-2.6.24/arch/arm/mach-at91/at91rm9200.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91rm9200.c 2008-03-01 18:46:49.000000000 +0200
+@@ -301,28 +301,28 @@
+ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+- 0, /* Parallel IO Controller A */
+- 0, /* Parallel IO Controller B */
+- 0, /* Parallel IO Controller C */
+- 0, /* Parallel IO Controller D */
+- 6, /* USART 0 */
+- 6, /* USART 1 */
+- 6, /* USART 2 */
+- 6, /* USART 3 */
++ 1, /* Parallel IO Controller A */
++ 1, /* Parallel IO Controller B */
++ 1, /* Parallel IO Controller C */
++ 1, /* Parallel IO Controller D */
++ 5, /* USART 0 */
++ 5, /* USART 1 */
++ 5, /* USART 2 */
++ 5, /* USART 3 */
+ 0, /* Multimedia Card Interface */
+- 4, /* USB Device Port */
+- 0, /* Two-Wire Interface */
+- 6, /* Serial Peripheral Interface */
+- 5, /* Serial Synchronous Controller 0 */
+- 5, /* Serial Synchronous Controller 1 */
+- 5, /* Serial Synchronous Controller 2 */
++ 2, /* USB Device Port */
++ 6, /* Two-Wire Interface */
++ 5, /* Serial Peripheral Interface */
++ 4, /* Serial Synchronous Controller 0 */
++ 4, /* Serial Synchronous Controller 1 */
++ 4, /* Serial Synchronous Controller 2 */
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+ 0, /* Timer Counter 3 */
+ 0, /* Timer Counter 4 */
+ 0, /* Timer Counter 5 */
+- 3, /* USB Host port */
++ 2, /* USB Host port */
+ 3, /* Ethernet MAC */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+ 0, /* Advanced Interrupt Controller (IRQ1) */
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c
+--- linux-2.6.24/arch/arm/mach-at91/at91rm9200_devices.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c 2008-03-01 18:50:43.000000000 +0200
+@@ -13,6 +13,7 @@
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+
++#include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c-gpio.h>
+
+@@ -29,7 +30,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+-static u64 ohci_dmamask = 0xffffffffUL;
++static u64 ohci_dmamask = DMA_BIT_MASK(32);
+ static struct at91_usbh_data usbh_data;
+
+ static struct resource usbh_resources[] = {
+@@ -50,7 +51,7 @@
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+@@ -125,7 +126,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
+-static u64 eth_dmamask = 0xffffffffUL;
++static u64 eth_dmamask = DMA_BIT_MASK(32);
+ static struct at91_eth_data eth_data;
+
+ static struct resource eth_resources[] = {
+@@ -146,7 +147,7 @@
+ .id = -1,
+ .dev = {
+ .dma_mask = &eth_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &eth_data,
+ },
+ .resource = eth_resources,
+@@ -285,7 +286,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+-static u64 mmc_dmamask = 0xffffffffUL;
++static u64 mmc_dmamask = DMA_BIT_MASK(32);
+ static struct at91_mmc_data mmc_data;
+
+ static struct resource mmc_resources[] = {
+@@ -306,7 +307,7 @@
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+@@ -375,7 +376,7 @@
+ static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+- .end = NAND_BASE + SZ_8M - 1,
++ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+ };
+@@ -512,8 +513,19 @@
+ * SPI
+ * -------------------------------------------------------------------- */
+
+-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+-static u64 spi_dmamask = 0xffffffffUL;
++#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */
++#define SPI_DEVNAME "at91_spi"
++
++#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */
++#define SPI_DEVNAME "at91_spi"
++
++#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */
++#define SPI_DEVNAME "atmel_spi"
++
++#endif
++
++#ifdef SPI_DEVNAME
++static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+ static struct resource spi_resources[] = {
+ [0] = {
+@@ -529,11 +541,11 @@
+ };
+
+ static struct platform_device at91rm9200_spi_device = {
+- .name = "atmel_spi",
++ .name = SPI_DEVNAME,
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi_resources,
+ .num_resources = ARRAY_SIZE(spi_resources),
+@@ -557,8 +569,17 @@
+ else
+ cs_pin = spi_standard_cs[devices[i].chip_select];
+
+- /* enable chip-select pin */
+- at91_set_gpio_output(cs_pin, 1);
++ if (devices[i].chip_select == 0) /* for CS0 errata */
++ at91_set_A_periph(cs_pin, 0);
++ else
++ at91_set_gpio_output(cs_pin, 1);
++
++#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
++ /*
++ * Force peripheral mode when using the legacy SPI driver.
++ */
++ at91_set_A_periph(cs_pin, 0);
++#endif
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+@@ -573,6 +594,90 @@
+
+
+ /* --------------------------------------------------------------------
++ * Timer/Counter blocks
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_ATMEL_TCLIB
++
++static struct resource tcb0_resources[] = {
++ [0] = {
++ .start = AT91RM9200_BASE_TCB0,
++ .end = AT91RM9200_BASE_TCB0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91RM9200_ID_TC0,
++ .end = AT91RM9200_ID_TC0,
++ .flags = IORESOURCE_IRQ,
++ },
++ [2] = {
++ .start = AT91RM9200_ID_TC1,
++ .end = AT91RM9200_ID_TC1,
++ .flags = IORESOURCE_IRQ,
++ },
++ [3] = {
++ .start = AT91RM9200_ID_TC2,
++ .end = AT91RM9200_ID_TC2,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91rm9200_tcb0_device = {
++ .name = "atmel_tcb",
++ .id = 0,
++ .resource = tcb0_resources,
++ .num_resources = ARRAY_SIZE(tcb0_resources),
++};
++
++static struct resource tcb1_resources[] = {
++ [0] = {
++ .start = AT91RM9200_BASE_TCB1,
++ .end = AT91RM9200_BASE_TCB1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91RM9200_ID_TC3,
++ .end = AT91RM9200_ID_TC3,
++ .flags = IORESOURCE_IRQ,
++ },
++ [2] = {
++ .start = AT91RM9200_ID_TC4,
++ .end = AT91RM9200_ID_TC4,
++ .flags = IORESOURCE_IRQ,
++ },
++ [3] = {
++ .start = AT91RM9200_ID_TC5,
++ .end = AT91RM9200_ID_TC5,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91rm9200_tcb1_device = {
++ .name = "atmel_tcb",
++ .id = 1,
++ .resource = tcb1_resources,
++ .num_resources = ARRAY_SIZE(tcb1_resources),
++};
++
++static void __init at91_add_device_tc(void)
++{
++ /* this chip has a separate clock and irq for each TC channel */
++ at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
++ at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
++ at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
++ platform_device_register(&at91rm9200_tcb0_device);
++
++ at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
++ at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
++ at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
++ platform_device_register(&at91rm9200_tcb1_device);
++}
++#else
++static void __init at91_add_device_tc(void) { }
++#endif
++
++
++/* --------------------------------------------------------------------
+ * RTC
+ * -------------------------------------------------------------------- */
+
+@@ -585,6 +690,7 @@
+
+ static void __init at91_add_device_rtc(void)
+ {
++ device_init_wakeup(&at91rm9200_rtc_device.dev, 1);
+ platform_device_register(&at91rm9200_rtc_device);
+ }
+ #else
+@@ -613,24 +719,175 @@
+
+
+ /* --------------------------------------------------------------------
+- * LEDs
++ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+-#if defined(CONFIG_LEDS)
+-u8 at91_leds_cpu;
+-u8 at91_leds_timer;
++#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
++static u64 ssc0_dmamask = DMA_BIT_MASK(32);
++
++static struct resource ssc0_resources[] = {
++ [0] = {
++ .start = AT91RM9200_BASE_SSC0,
++ .end = AT91RM9200_BASE_SSC0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91RM9200_ID_SSC0,
++ .end = AT91RM9200_ID_SSC0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91rm9200_ssc0_device = {
++ .name = "ssc",
++ .id = 0,
++ .dev = {
++ .dma_mask = &ssc0_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc0_resources,
++ .num_resources = ARRAY_SIZE(ssc0_resources),
++};
++
++static inline void configure_ssc0_pins(unsigned pins)
++{
++ if (pins & ATMEL_SSC_TF)
++ at91_set_A_periph(AT91_PIN_PB0, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_A_periph(AT91_PIN_PB1, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_A_periph(AT91_PIN_PB2, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_A_periph(AT91_PIN_PB3, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_A_periph(AT91_PIN_PB4, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_A_periph(AT91_PIN_PB5, 1);
++}
++
++static u64 ssc1_dmamask = DMA_BIT_MASK(32);
++
++static struct resource ssc1_resources[] = {
++ [0] = {
++ .start = AT91RM9200_BASE_SSC1,
++ .end = AT91RM9200_BASE_SSC1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91RM9200_ID_SSC1,
++ .end = AT91RM9200_ID_SSC1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91rm9200_ssc1_device = {
++ .name = "ssc",
++ .id = 1,
++ .dev = {
++ .dma_mask = &ssc1_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc1_resources,
++ .num_resources = ARRAY_SIZE(ssc1_resources),
++};
+
+-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
++static inline void configure_ssc1_pins(unsigned pins)
+ {
+- /* Enable GPIO to access the LEDs */
+- at91_set_gpio_output(cpu_led, 1);
+- at91_set_gpio_output(timer_led, 1);
++ if (pins & ATMEL_SSC_TF)
++ at91_set_A_periph(AT91_PIN_PB6, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_A_periph(AT91_PIN_PB7, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_A_periph(AT91_PIN_PB8, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_A_periph(AT91_PIN_PB9, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_A_periph(AT91_PIN_PB10, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_A_periph(AT91_PIN_PB11, 1);
++}
++
++static u64 ssc2_dmamask = DMA_BIT_MASK(32);
+
+- at91_leds_cpu = cpu_led;
+- at91_leds_timer = timer_led;
++static struct resource ssc2_resources[] = {
++ [0] = {
++ .start = AT91RM9200_BASE_SSC2,
++ .end = AT91RM9200_BASE_SSC2 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91RM9200_ID_SSC2,
++ .end = AT91RM9200_ID_SSC2,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91rm9200_ssc2_device = {
++ .name = "ssc",
++ .id = 2,
++ .dev = {
++ .dma_mask = &ssc2_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc2_resources,
++ .num_resources = ARRAY_SIZE(ssc2_resources),
++};
++
++static inline void configure_ssc2_pins(unsigned pins)
++{
++ if (pins & ATMEL_SSC_TF)
++ at91_set_A_periph(AT91_PIN_PB12, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_A_periph(AT91_PIN_PB13, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_A_periph(AT91_PIN_PB14, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_A_periph(AT91_PIN_PB15, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_A_periph(AT91_PIN_PB16, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_A_periph(AT91_PIN_PB17, 1);
+ }
++
++/*
++ * SSC controllers are accessed through library code, instead of any
++ * kind of all-singing/all-dancing driver. For example one could be
++ * used by a particular I2S audio codec's driver, while another one
++ * on the same system might be used by a custom data capture driver.
++ */
++void __init at91_add_device_ssc(unsigned id, unsigned pins)
++{
++ struct platform_device *pdev;
++
++ /*
++ * NOTE: caller is responsible for passing information matching
++ * "pins" to whatever will be using each particular controller.
++ */
++ switch (id) {
++ case AT91RM9200_ID_SSC0:
++ pdev = &at91rm9200_ssc0_device;
++ configure_ssc0_pins(pins);
++ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
++ break;
++ case AT91RM9200_ID_SSC1:
++ pdev = &at91rm9200_ssc1_device;
++ configure_ssc1_pins(pins);
++ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
++ break;
++ case AT91RM9200_ID_SSC2:
++ pdev = &at91rm9200_ssc2_device;
++ configure_ssc2_pins(pins);
++ at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
++ break;
++ default:
++ return;
++ }
++
++ platform_device_register(pdev);
++}
++
+ #else
+-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
++void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+ #endif
+
+
+@@ -657,13 +914,15 @@
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+ };
++static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91rm9200_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+- .platform_data = &dbgu_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &dbgu_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+@@ -692,29 +951,36 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91rm9200_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+- .platform_data = &uart0_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart0_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+ };
+
+-static inline void configure_usart0_pins(void)
++static inline void configure_usart0_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */
+- at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
+
+- /*
+- * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
+- * We need to drive the pin manually. Default is off (RTS is active low).
+- */
+- at91_set_gpio_output(AT91_PIN_PA21, 1);
++ if (pins & ATMEL_UART_CTS)
++ at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
++
++ if (pins & ATMEL_UART_RTS) {
++ /*
++ * AT91RM9200 Errata #39 - RTS0 is not internally connected
++ * to PA21, so we need to drive the pin manually.
++ * Default is off (RTS is active low).
++ */
++ at91_set_gpio_output(AT91_PIN_PA21, 1);
++ }
+ }
+
+ static struct resource uart1_resources[] = {
+@@ -734,28 +1000,37 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91rm9200_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+- .platform_data = &uart1_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart1_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+ };
+
+-static inline void configure_usart1_pins(void)
++static inline void configure_usart1_pins(unsigned pins)
+ {
+- at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
+- at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
+ at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */
+- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
+- at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
+- at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
+- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
++
++ if (pins & ATMEL_UART_RI)
++ at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
++ if (pins & ATMEL_UART_DTR)
++ at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
++ if (pins & ATMEL_UART_DCD)
++ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
++ if (pins & ATMEL_UART_DSR)
++ at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
++ if (pins & ATMEL_UART_RTS)
++ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
+ }
+
+ static struct resource uart2_resources[] = {
+@@ -775,22 +1050,29 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91rm9200_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+- .platform_data = &uart2_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart2_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+ };
+
+-static inline void configure_usart2_pins(void)
++static inline void configure_usart2_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */
+ at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */
++
++ if (pins & ATMEL_UART_CTS)
++ at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */
++ if (pins & ATMEL_UART_RTS)
++ at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */
+ }
+
+ static struct resource uart3_resources[] = {
+@@ -810,28 +1092,35 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91rm9200_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+- .platform_data = &uart3_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart3_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart3_data,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+ };
+
+-static inline void configure_usart3_pins(void)
++static inline void configure_usart3_pins(unsigned pins)
+ {
+ at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
+ at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
++
++ if (pins & ATMEL_UART_CTS)
++ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
++ if (pins & ATMEL_UART_RTS)
++ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
+ }
+
+-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
++static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* UARTs to use */
+ struct platform_device *atmel_default_console_device; /* the serial console device */
+
+-void __init at91_init_serial(struct at91_uart_config *config)
++void __init __deprecated at91_init_serial(struct at91_uart_config *config)
+ {
+ int i;
+
+@@ -839,22 +1128,22 @@
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+- configure_usart0_pins();
++ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_uarts[i] = &at91rm9200_uart0_device;
+ at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
+ break;
+ case 1:
+- configure_usart1_pins();
++ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
+ at91_uarts[i] = &at91rm9200_uart1_device;
+ at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
+ break;
+ case 2:
+- configure_usart2_pins();
++ configure_usart2_pins(0);
+ at91_uarts[i] = &at91rm9200_uart2_device;
+ at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
+ break;
+ case 3:
+- configure_usart3_pins();
++ configure_usart3_pins(0);
+ at91_uarts[i] = &at91rm9200_uart3_device;
+ at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
+ break;
+@@ -876,6 +1165,53 @@
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+ }
+
++void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0: /* DBGU */
++ pdev = &at91rm9200_dbgu_device;
++ configure_dbgu_pins();
++ at91_clock_associate("mck", &pdev->dev, "usart");
++ break;
++ case AT91RM9200_ID_US0:
++ pdev = &at91rm9200_uart0_device;
++ configure_usart0_pins(pins);
++ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
++ break;
++ case AT91RM9200_ID_US1:
++ pdev = &at91rm9200_uart1_device;
++ configure_usart1_pins(pins);
++ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
++ break;
++ case AT91RM9200_ID_US2:
++ pdev = &at91rm9200_uart2_device;
++ configure_usart2_pins(pins);
++ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
++ break;
++ case AT91RM9200_ID_US3:
++ pdev = &at91rm9200_uart3_device;
++ configure_usart3_pins(pins);
++ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
++ break;
++ default:
++ return;
++ }
++ pdev->id = portnr; /* update to mapped ID */
++
++ if (portnr < ATMEL_MAX_UART)
++ at91_uarts[portnr] = pdev;
++}
++
++void __init at91_set_serial_console(unsigned portnr)
++{
++ if (portnr < ATMEL_MAX_UART)
++ atmel_default_console_device = at91_uarts[portnr];
++ if (!atmel_default_console_device)
++ printk(KERN_INFO "AT91: No default serial console defined.\n");
++}
++
+ void __init at91_add_device_serial(void)
+ {
+ int i;
+@@ -886,7 +1222,9 @@
+ }
+ }
+ #else
+-void __init at91_init_serial(struct at91_uart_config *config) {}
++void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
++void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
++void __init at91_set_serial_console(unsigned portnr) {}
+ void __init at91_add_device_serial(void) {}
+ #endif
+
+@@ -901,6 +1239,7 @@
+ {
+ at91_add_device_rtc();
+ at91_add_device_watchdog();
++ at91_add_device_tc();
+ return 0;
+ }
+
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91rm9200_time.c linux-2.6/arch/arm/mach-at91/at91rm9200_time.c
+--- linux-2.6.24/arch/arm/mach-at91/at91rm9200_time.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91rm9200_time.c 2007-12-31 15:04:28.000000000 +0200
+@@ -136,8 +136,6 @@
+ u32 alm;
+ int status = 0;
+
+- BUG_ON(delta < 2);
+-
+ /* Use "raw" primitives so we behave correctly on RT kernels. */
+ raw_local_irq_save(flags);
+
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9260.c linux-2.6/arch/arm/mach-at91/at91sam9260.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam9260.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91sam9260.c 2008-03-01 19:03:06.000000000 +0200
+@@ -11,6 +11,7 @@
+ */
+
+ #include <linux/module.h>
++#include <linux/pm.h>
+
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+@@ -18,6 +19,7 @@
+ #include <asm/arch/at91sam9260.h>
+ #include <asm/arch/at91_pmc.h>
+ #include <asm/arch/at91_rstc.h>
++#include <asm/arch/at91_shdwc.h>
+
+ #include "generic.h"
+ #include "clock.h"
+@@ -267,6 +269,11 @@
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+ }
+
++static void at91sam9260_poweroff(void)
++{
++ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
++}
++
+
+ /* --------------------------------------------------------------------
+ * AT91SAM9260 processor initialization
+@@ -304,6 +311,7 @@
+ iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
+
+ at91_arch_reset = at91sam9260_reset;
++ pm_power_off = at91sam9260_poweroff;
+ at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
+ | (1 << AT91SAM9260_ID_IRQ2);
+
+@@ -327,30 +335,30 @@
+ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+- 0, /* Parallel IO Controller A */
+- 0, /* Parallel IO Controller B */
+- 0, /* Parallel IO Controller C */
++ 1, /* Parallel IO Controller A */
++ 1, /* Parallel IO Controller B */
++ 1, /* Parallel IO Controller C */
+ 0, /* Analog-to-Digital Converter */
+- 6, /* USART 0 */
+- 6, /* USART 1 */
+- 6, /* USART 2 */
++ 5, /* USART 0 */
++ 5, /* USART 1 */
++ 5, /* USART 2 */
+ 0, /* Multimedia Card Interface */
+- 4, /* USB Device Port */
+- 0, /* Two-Wire Interface */
+- 6, /* Serial Peripheral Interface 0 */
+- 6, /* Serial Peripheral Interface 1 */
++ 2, /* USB Device Port */
++ 6, /* Two-Wire Interface */
++ 5, /* Serial Peripheral Interface 0 */
++ 5, /* Serial Peripheral Interface 1 */
+ 5, /* Serial Synchronous Controller */
+ 0,
+ 0,
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+- 3, /* USB Host port */
++ 2, /* USB Host port */
+ 3, /* Ethernet */
+ 0, /* Image Sensor Interface */
+- 6, /* USART 3 */
+- 6, /* USART 4 */
+- 6, /* USART 5 */
++ 5, /* USART 3 */
++ 5, /* USART 4 */
++ 5, /* USART 5 */
+ 0, /* Timer Counter 3 */
+ 0, /* Timer Counter 4 */
+ 0, /* Timer Counter 5 */
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam9260_devices.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c 2008-03-01 22:09:03.000000000 +0200
+@@ -12,13 +12,14 @@
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+
++#include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c-gpio.h>
+
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+ #include <asm/arch/at91sam9260.h>
+-#include <asm/arch/at91sam926x_mc.h>
++#include <asm/arch/at91sam926x_smc.h>
+ #include <asm/arch/at91sam9260_matrix.h>
+
+ #include "generic.h"
+@@ -29,7 +30,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+-static u64 ohci_dmamask = 0xffffffffUL;
++static u64 ohci_dmamask = DMA_BIT_MASK(32);
+ static struct at91_usbh_data usbh_data;
+
+ static struct resource usbh_resources[] = {
+@@ -50,7 +51,7 @@
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+@@ -125,7 +126,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+-static u64 eth_dmamask = 0xffffffffUL;
++static u64 eth_dmamask = DMA_BIT_MASK(32);
+ static struct at91_eth_data eth_data;
+
+ static struct resource eth_resources[] = {
+@@ -146,7 +147,7 @@
+ .id = -1,
+ .dev = {
+ .dma_mask = &eth_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &eth_data,
+ },
+ .resource = eth_resources,
+@@ -199,7 +200,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+-static u64 mmc_dmamask = 0xffffffffUL;
++static u64 mmc_dmamask = DMA_BIT_MASK(32);
+ static struct at91_mmc_data mmc_data;
+
+ static struct resource mmc_resources[] = {
+@@ -220,7 +221,7 @@
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+@@ -287,9 +288,14 @@
+ #define NAND_BASE AT91_CHIPSELECT_3
+
+ static struct resource nand_resources[] = {
+- {
++ [0] = {
+ .start = NAND_BASE,
+- .end = NAND_BASE + SZ_8M - 1,
++ .end = NAND_BASE + SZ_256M - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91_BASE_SYS + AT91_ECC,
++ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+ };
+@@ -312,7 +318,7 @@
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
++ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+@@ -431,7 +437,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+-static u64 spi_dmamask = 0xffffffffUL;
++static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+ static struct resource spi0_resources[] = {
+ [0] = {
+@@ -451,7 +457,7 @@
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+@@ -477,7 +483,7 @@
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+@@ -539,24 +545,211 @@
+
+
+ /* --------------------------------------------------------------------
+- * LEDs
++ * Timer/Counter blocks
+ * -------------------------------------------------------------------- */
+
+-#if defined(CONFIG_LEDS)
+-u8 at91_leds_cpu;
+-u8 at91_leds_timer;
++#ifdef CONFIG_ATMEL_TCLIB
++
++static struct resource tcb0_resources[] = {
++ [0] = {
++ .start = AT91SAM9260_BASE_TCB0,
++ .end = AT91SAM9260_BASE_TCB0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9260_ID_TC0,
++ .end = AT91SAM9260_ID_TC0,
++ .flags = IORESOURCE_IRQ,
++ },
++ [2] = {
++ .start = AT91SAM9260_ID_TC1,
++ .end = AT91SAM9260_ID_TC1,
++ .flags = IORESOURCE_IRQ,
++ },
++ [3] = {
++ .start = AT91SAM9260_ID_TC2,
++ .end = AT91SAM9260_ID_TC2,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9260_tcb0_device = {
++ .name = "atmel_tcb",
++ .id = 0,
++ .resource = tcb0_resources,
++ .num_resources = ARRAY_SIZE(tcb0_resources),
++};
++
++static struct resource tcb1_resources[] = {
++ [0] = {
++ .start = AT91SAM9260_BASE_TCB1,
++ .end = AT91SAM9260_BASE_TCB1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9260_ID_TC3,
++ .end = AT91SAM9260_ID_TC3,
++ .flags = IORESOURCE_IRQ,
++ },
++ [2] = {
++ .start = AT91SAM9260_ID_TC4,
++ .end = AT91SAM9260_ID_TC4,
++ .flags = IORESOURCE_IRQ,
++ },
++ [3] = {
++ .start = AT91SAM9260_ID_TC5,
++ .end = AT91SAM9260_ID_TC5,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9260_tcb1_device = {
++ .name = "atmel_tcb",
++ .id = 1,
++ .resource = tcb1_resources,
++ .num_resources = ARRAY_SIZE(tcb1_resources),
++};
+
+-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
++static void __init at91_add_device_tc(void)
+ {
+- /* Enable GPIO to access the LEDs */
+- at91_set_gpio_output(cpu_led, 1);
+- at91_set_gpio_output(timer_led, 1);
++ /* this chip has a separate clock and irq for each TC channel */
++ at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
++ at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
++ at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
++ platform_device_register(&at91sam9260_tcb0_device);
++
++ at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
++ at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
++ at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
++ platform_device_register(&at91sam9260_tcb1_device);
++}
++#else
++static void __init at91_add_device_tc(void) { }
++#endif
+
+- at91_leds_cpu = cpu_led;
+- at91_leds_timer = timer_led;
++
++/* --------------------------------------------------------------------
++ * RTT
++ * -------------------------------------------------------------------- */
++
++static struct resource rtt_resources[] = {
++ {
++ .start = AT91_BASE_SYS + AT91_RTT,
++ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device at91sam9260_rtt_device = {
++ .name = "at91_rtt",
++ .id = -1,
++ .resource = rtt_resources,
++ .num_resources = ARRAY_SIZE(rtt_resources),
++};
++
++static void __init at91_add_device_rtt(void)
++{
++ device_init_wakeup(&at91sam9260_rtt_device.dev, 1);
++ platform_device_register(&at91sam9260_rtt_device);
++}
++
++
++/* --------------------------------------------------------------------
++ * Watchdog
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
++static struct platform_device at91sam9260_wdt_device = {
++ .name = "at91_wdt",
++ .id = -1,
++ .num_resources = 0,
++};
++
++static void __init at91_add_device_watchdog(void)
++{
++ platform_device_register(&at91sam9260_wdt_device);
+ }
+ #else
+-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
++static void __init at91_add_device_watchdog(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * SSC -- Synchronous Serial Controller
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
++static u64 ssc_dmamask = DMA_BIT_MASK(32);
++
++static struct resource ssc_resources[] = {
++ [0] = {
++ .start = AT91SAM9260_BASE_SSC,
++ .end = AT91SAM9260_BASE_SSC + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9260_ID_SSC,
++ .end = AT91SAM9260_ID_SSC,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9260_ssc_device = {
++ .name = "ssc",
++ .id = 0,
++ .dev = {
++ .dma_mask = &ssc_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc_resources,
++ .num_resources = ARRAY_SIZE(ssc_resources),
++};
++
++static inline void configure_ssc_pins(unsigned pins)
++{
++ if (pins & ATMEL_SSC_TF)
++ at91_set_A_periph(AT91_PIN_PB17, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_A_periph(AT91_PIN_PB16, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_A_periph(AT91_PIN_PB18, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_A_periph(AT91_PIN_PB19, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_A_periph(AT91_PIN_PB20, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_A_periph(AT91_PIN_PB21, 1);
++}
++
++/*
++ * SSC controllers are accessed through library code, instead of any
++ * kind of all-singing/all-dancing driver. For example one could be
++ * used by a particular I2S audio codec's driver, while another one
++ * on the same system might be used by a custom data capture driver.
++ */
++void __init at91_add_device_ssc(unsigned id, unsigned pins)
++{
++ struct platform_device *pdev;
++
++ /*
++ * NOTE: caller is responsible for passing information matching
++ * "pins" to whatever will be using each particular controller.
++ */
++ switch (id) {
++ case AT91SAM9260_ID_SSC:
++ pdev = &at91sam9260_ssc_device;
++ configure_ssc_pins(pins);
++ at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
++ break;
++ default:
++ return;
++ }
++
++ platform_device_register(pdev);
++}
++
++#else
++struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {}
+ #endif
+
+
+@@ -582,13 +775,15 @@
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+ };
++static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9260_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+- .platform_data = &dbgu_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &dbgu_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+@@ -617,28 +812,37 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9260_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+- .platform_data = &uart0_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart0_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+ };
+
+-static inline void configure_usart0_pins(void)
++static inline void configure_usart0_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
+- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
+- at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
+- at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
+- at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
+- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
+- at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
++ if (pins & ATMEL_UART_DTR)
++ at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
++ if (pins & ATMEL_UART_DSR)
++ at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
++ if (pins & ATMEL_UART_DCD)
++ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
++ if (pins & ATMEL_UART_RI)
++ at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
+ }
+
+ static struct resource uart1_resources[] = {
+@@ -658,24 +862,29 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9260_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+- .platform_data = &uart1_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart1_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+ };
+
+-static inline void configure_usart1_pins(void)
++static inline void configure_usart1_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
+- at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
+- at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
+ }
+
+ static struct resource uart2_resources[] = {
+@@ -695,22 +904,29 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9260_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+- .platform_data = &uart2_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart2_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+ };
+
+-static inline void configure_usart2_pins(void)
++static inline void configure_usart2_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
+ }
+
+ static struct resource uart3_resources[] = {
+@@ -730,22 +946,29 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9260_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+- .platform_data = &uart3_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart3_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart3_data,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+ };
+
+-static inline void configure_usart3_pins(void)
++static inline void configure_usart3_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
+ }
+
+ static struct resource uart4_resources[] = {
+@@ -765,13 +988,15 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart4_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9260_uart4_device = {
+ .name = "atmel_usart",
+ .id = 5,
+ .dev = {
+- .platform_data = &uart4_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart4_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart4_data,
+ },
+ .resource = uart4_resources,
+ .num_resources = ARRAY_SIZE(uart4_resources),
+@@ -800,13 +1025,15 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart5_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9260_uart5_device = {
+ .name = "atmel_usart",
+ .id = 6,
+ .dev = {
+- .platform_data = &uart5_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart5_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart5_data,
+ },
+ .resource = uart5_resources,
+ .num_resources = ARRAY_SIZE(uart5_resources),
+@@ -818,10 +1045,10 @@
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
+ }
+
+-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
++static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+ struct platform_device *atmel_default_console_device; /* the serial console device */
+
+-void __init at91_init_serial(struct at91_uart_config *config)
++void __init __deprecated at91_init_serial(struct at91_uart_config *config)
+ {
+ int i;
+
+@@ -829,22 +1056,22 @@
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+- configure_usart0_pins();
++ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
+ at91_uarts[i] = &at91sam9260_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
+ break;
+ case 1:
+- configure_usart1_pins();
++ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_uarts[i] = &at91sam9260_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
+ break;
+ case 2:
+- configure_usart2_pins();
++ configure_usart2_pins(0);
+ at91_uarts[i] = &at91sam9260_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
+ break;
+ case 3:
+- configure_usart3_pins();
++ configure_usart3_pins(0);
+ at91_uarts[i] = &at91sam9260_uart3_device;
+ at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
+ break;
+@@ -876,6 +1103,63 @@
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+ }
+
++void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0: /* DBGU */
++ pdev = &at91sam9260_dbgu_device;
++ configure_dbgu_pins();
++ at91_clock_associate("mck", &pdev->dev, "usart");
++ break;
++ case AT91SAM9260_ID_US0:
++ pdev = &at91sam9260_uart0_device;
++ configure_usart0_pins(pins);
++ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
++ break;
++ case AT91SAM9260_ID_US1:
++ pdev = &at91sam9260_uart1_device;
++ configure_usart1_pins(pins);
++ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
++ break;
++ case AT91SAM9260_ID_US2:
++ pdev = &at91sam9260_uart2_device;
++ configure_usart2_pins(pins);
++ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
++ break;
++ case AT91SAM9260_ID_US3:
++ pdev = &at91sam9260_uart3_device;
++ configure_usart3_pins(pins);
++ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
++ break;
++ case AT91SAM9260_ID_US4:
++ pdev = &at91sam9260_uart4_device;
++ configure_usart4_pins();
++ at91_clock_associate("usart4_clk", &pdev->dev, "usart");
++ break;
++ case AT91SAM9260_ID_US5:
++ pdev = &at91sam9260_uart5_device;
++ configure_usart5_pins();
++ at91_clock_associate("usart5_clk", &pdev->dev, "usart");
++ break;
++ default:
++ return;
++ }
++ pdev->id = portnr; /* update to mapped ID */
++
++ if (portnr < ATMEL_MAX_UART)
++ at91_uarts[portnr] = pdev;
++}
++
++void __init at91_set_serial_console(unsigned portnr)
++{
++ if (portnr < ATMEL_MAX_UART)
++ atmel_default_console_device = at91_uarts[portnr];
++ if (!atmel_default_console_device)
++ printk(KERN_INFO "AT91: No default serial console defined.\n");
++}
++
+ void __init at91_add_device_serial(void)
+ {
+ int i;
+@@ -886,7 +1170,9 @@
+ }
+ }
+ #else
+-void __init at91_init_serial(struct at91_uart_config *config) {}
++void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
++void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
++void __init at91_set_serial_console(unsigned portnr) {}
+ void __init at91_add_device_serial(void) {}
+ #endif
+
+@@ -898,6 +1184,9 @@
+ */
+ static int __init at91_add_standard_devices(void)
+ {
++ at91_add_device_rtt();
++ at91_add_device_watchdog();
++ at91_add_device_tc();
+ return 0;
+ }
+
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9261.c linux-2.6/arch/arm/mach-at91/at91sam9261.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam9261.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91sam9261.c 2008-03-01 19:03:29.000000000 +0200
+@@ -11,12 +11,14 @@
+ */
+
+ #include <linux/module.h>
++#include <linux/pm.h>
+
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+ #include <asm/arch/at91sam9261.h>
+ #include <asm/arch/at91_pmc.h>
+ #include <asm/arch/at91_rstc.h>
++#include <asm/arch/at91_shdwc.h>
+
+ #include "generic.h"
+ #include "clock.h"
+@@ -245,6 +247,11 @@
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+ }
+
++static void at91sam9261_poweroff(void)
++{
++ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
++}
++
+
+ /* --------------------------------------------------------------------
+ * AT91SAM9261 processor initialization
+@@ -256,6 +263,7 @@
+ iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
+
+ at91_arch_reset = at91sam9261_reset;
++ pm_power_off = at91sam9261_poweroff;
+ at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
+ | (1 << AT91SAM9261_ID_IRQ2);
+
+@@ -279,25 +287,25 @@
+ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+- 0, /* Parallel IO Controller A */
+- 0, /* Parallel IO Controller B */
+- 0, /* Parallel IO Controller C */
++ 1, /* Parallel IO Controller A */
++ 1, /* Parallel IO Controller B */
++ 1, /* Parallel IO Controller C */
+ 0,
+- 6, /* USART 0 */
+- 6, /* USART 1 */
+- 6, /* USART 2 */
++ 5, /* USART 0 */
++ 5, /* USART 1 */
++ 5, /* USART 2 */
+ 0, /* Multimedia Card Interface */
+- 4, /* USB Device Port */
+- 0, /* Two-Wire Interface */
+- 6, /* Serial Peripheral Interface 0 */
+- 6, /* Serial Peripheral Interface 1 */
+- 5, /* Serial Synchronous Controller 0 */
+- 5, /* Serial Synchronous Controller 1 */
+- 5, /* Serial Synchronous Controller 2 */
++ 2, /* USB Device Port */
++ 6, /* Two-Wire Interface */
++ 5, /* Serial Peripheral Interface 0 */
++ 5, /* Serial Peripheral Interface 1 */
++ 4, /* Serial Synchronous Controller 0 */
++ 4, /* Serial Synchronous Controller 1 */
++ 4, /* Serial Synchronous Controller 2 */
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+- 3, /* USB Host port */
++ 2, /* USB Host port */
+ 3, /* LCD Controller */
+ 0,
+ 0,
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam9261_devices.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c 2008-03-01 22:09:18.000000000 +0200
+@@ -13,6 +13,7 @@
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+
++#include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c-gpio.h>
+
+@@ -23,7 +24,7 @@
+ #include <asm/arch/gpio.h>
+ #include <asm/arch/at91sam9261.h>
+ #include <asm/arch/at91sam9261_matrix.h>
+-#include <asm/arch/at91sam926x_mc.h>
++#include <asm/arch/at91sam926x_smc.h>
+
+ #include "generic.h"
+
+@@ -33,7 +34,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+-static u64 ohci_dmamask = 0xffffffffUL;
++static u64 ohci_dmamask = DMA_BIT_MASK(32);
+ static struct at91_usbh_data usbh_data;
+
+ static struct resource usbh_resources[] = {
+@@ -54,7 +55,7 @@
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+@@ -106,8 +107,6 @@
+
+ void __init at91_add_device_udc(struct at91_udc_data *data)
+ {
+- unsigned long x;
+-
+ if (!data)
+ return;
+
+@@ -116,9 +115,7 @@
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+
+- /* Pullup pin is handled internally */
+- x = at91_sys_read(AT91_MATRIX_USBPUCR);
+- at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
++ /* Pullup pin is handled internally by USB device peripheral */
+
+ udc_data = *data;
+ platform_device_register(&at91sam9261_udc_device);
+@@ -132,7 +129,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+-static u64 mmc_dmamask = 0xffffffffUL;
++static u64 mmc_dmamask = DMA_BIT_MASK(32);
+ static struct at91_mmc_data mmc_data;
+
+ static struct resource mmc_resources[] = {
+@@ -153,7 +150,7 @@
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+@@ -232,7 +229,7 @@
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
++ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+@@ -354,7 +351,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+-static u64 spi_dmamask = 0xffffffffUL;
++static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+ static struct resource spi0_resources[] = {
+ [0] = {
+@@ -374,7 +371,7 @@
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+@@ -400,7 +397,7 @@
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+@@ -466,7 +463,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+-static u64 lcdc_dmamask = 0xffffffffUL;
++static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+ static struct atmel_lcdfb_info lcdc_data;
+
+ static struct resource lcdc_resources[] = {
+@@ -494,7 +491,7 @@
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+@@ -507,6 +504,17 @@
+ return;
+ }
+
++#if defined(CONFIG_FB_ATMEL_STN)
++ at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */
++ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
++ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
++ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
++ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
++ at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */
++ at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */
++ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
++ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
++#else
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
+@@ -529,6 +537,7 @@
+ at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
+ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
++#endif
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+@@ -539,24 +548,270 @@
+
+
+ /* --------------------------------------------------------------------
+- * LEDs
++ * Timer/Counter block
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_ATMEL_TCLIB
++
++static struct resource tcb_resources[] = {
++ [0] = {
++ .start = AT91SAM9261_BASE_TCB0,
++ .end = AT91SAM9261_BASE_TCB0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9261_ID_TC0,
++ .end = AT91SAM9261_ID_TC0,
++ .flags = IORESOURCE_IRQ,
++ },
++ [2] = {
++ .start = AT91SAM9261_ID_TC1,
++ .end = AT91SAM9261_ID_TC1,
++ .flags = IORESOURCE_IRQ,
++ },
++ [3] = {
++ .start = AT91SAM9261_ID_TC2,
++ .end = AT91SAM9261_ID_TC2,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9261_tcb_device = {
++ .name = "atmel_tcb",
++ .id = 0,
++ .resource = tcb_resources,
++ .num_resources = ARRAY_SIZE(tcb_resources),
++};
++
++static void __init at91_add_device_tc(void)
++{
++ /* this chip has a separate clock and irq for each TC channel */
++ at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
++ at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
++ at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
++ platform_device_register(&at91sam9261_tcb_device);
++}
++#else
++static void __init at91_add_device_tc(void) { }
++#endif
++
++
++/* --------------------------------------------------------------------
++ * RTT
++ * -------------------------------------------------------------------- */
++
++static struct resource rtt_resources[] = {
++ {
++ .start = AT91_BASE_SYS + AT91_RTT,
++ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device at91sam9261_rtt_device = {
++ .name = "at91_rtt",
++ .id = -1,
++ .resource = rtt_resources,
++ .num_resources = ARRAY_SIZE(rtt_resources),
++};
++
++static void __init at91_add_device_rtt(void)
++{
++ device_init_wakeup(&at91sam9261_rtt_device.dev, 1);
++ platform_device_register(&at91sam9261_rtt_device);
++}
++
++
++/* --------------------------------------------------------------------
++ * Watchdog
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
++static struct platform_device at91sam9261_wdt_device = {
++ .name = "at91_wdt",
++ .id = -1,
++ .num_resources = 0,
++};
++
++static void __init at91_add_device_watchdog(void)
++{
++ platform_device_register(&at91sam9261_wdt_device);
++}
++#else
++static void __init at91_add_device_watchdog(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+-#if defined(CONFIG_LEDS)
+-u8 at91_leds_cpu;
+-u8 at91_leds_timer;
++#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
++static u64 ssc0_dmamask = DMA_BIT_MASK(32);
++
++static struct resource ssc0_resources[] = {
++ [0] = {
++ .start = AT91SAM9261_BASE_SSC0,
++ .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9261_ID_SSC0,
++ .end = AT91SAM9261_ID_SSC0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9261_ssc0_device = {
++ .name = "ssc",
++ .id = 0,
++ .dev = {
++ .dma_mask = &ssc0_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc0_resources,
++ .num_resources = ARRAY_SIZE(ssc0_resources),
++};
++
++static inline void configure_ssc0_pins(unsigned pins)
++{
++ if (pins & ATMEL_SSC_TF)
++ at91_set_A_periph(AT91_PIN_PB21, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_A_periph(AT91_PIN_PB22, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_A_periph(AT91_PIN_PB23, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_A_periph(AT91_PIN_PB24, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_A_periph(AT91_PIN_PB25, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_A_periph(AT91_PIN_PB26, 1);
++}
++
++static u64 ssc1_dmamask = DMA_BIT_MASK(32);
++
++static struct resource ssc1_resources[] = {
++ [0] = {
++ .start = AT91SAM9261_BASE_SSC1,
++ .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9261_ID_SSC1,
++ .end = AT91SAM9261_ID_SSC1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9261_ssc1_device = {
++ .name = "ssc",
++ .id = 1,
++ .dev = {
++ .dma_mask = &ssc1_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc1_resources,
++ .num_resources = ARRAY_SIZE(ssc1_resources),
++};
++
++static inline void configure_ssc1_pins(unsigned pins)
++{
++ if (pins & ATMEL_SSC_TF)
++ at91_set_B_periph(AT91_PIN_PA17, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_B_periph(AT91_PIN_PA18, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_B_periph(AT91_PIN_PA19, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_B_periph(AT91_PIN_PA20, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_B_periph(AT91_PIN_PA21, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_B_periph(AT91_PIN_PA22, 1);
++}
++
++static u64 ssc2_dmamask = DMA_BIT_MASK(32);
++
++static struct resource ssc2_resources[] = {
++ [0] = {
++ .start = AT91SAM9261_BASE_SSC2,
++ .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9261_ID_SSC2,
++ .end = AT91SAM9261_ID_SSC2,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9261_ssc2_device = {
++ .name = "ssc",
++ .id = 2,
++ .dev = {
++ .dma_mask = &ssc2_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc2_resources,
++ .num_resources = ARRAY_SIZE(ssc2_resources),
++};
+
+-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
++static inline void configure_ssc2_pins(unsigned pins)
+ {
+- /* Enable GPIO to access the LEDs */
+- at91_set_gpio_output(cpu_led, 1);
+- at91_set_gpio_output(timer_led, 1);
++ if (pins & ATMEL_SSC_TF)
++ at91_set_B_periph(AT91_PIN_PC25, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_B_periph(AT91_PIN_PC26, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_B_periph(AT91_PIN_PC27, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_B_periph(AT91_PIN_PC28, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_B_periph(AT91_PIN_PC29, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_B_periph(AT91_PIN_PC30, 1);
++}
++
++/*
++ * SSC controllers are accessed through library code, instead of any
++ * kind of all-singing/all-dancing driver. For example one could be
++ * used by a particular I2S audio codec's driver, while another one
++ * on the same system might be used by a custom data capture driver.
++ */
++void __init at91_add_device_ssc(unsigned id, unsigned pins)
++{
++ struct platform_device *pdev;
++
++ /*
++ * NOTE: caller is responsible for passing information matching
++ * "pins" to whatever will be using each particular controller.
++ */
++ switch (id) {
++ case AT91SAM9261_ID_SSC0:
++ pdev = &at91sam9261_ssc0_device;
++ configure_ssc0_pins(pins);
++ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
++ break;
++ case AT91SAM9261_ID_SSC1:
++ pdev = &at91sam9261_ssc1_device;
++ configure_ssc1_pins(pins);
++ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
++ break;
++ case AT91SAM9261_ID_SSC2:
++ pdev = &at91sam9261_ssc2_device;
++ configure_ssc2_pins(pins);
++ at91_clock_associate("ssc2_clk", &pdev->dev, "pclk");
++ break;
++ default:
++ return;
++ }
+
+- at91_leds_cpu = cpu_led;
+- at91_leds_timer = timer_led;
++ platform_device_register(pdev);
+ }
++
+ #else
+-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
++struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {}
+ #endif
+
+
+@@ -583,13 +838,15 @@
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+ };
++static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9261_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+- .platform_data = &dbgu_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &dbgu_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+@@ -618,24 +875,29 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9261_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+- .platform_data = &uart0_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart0_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+ };
+
+-static inline void configure_usart0_pins(void)
++static inline void configure_usart0_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
+- at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
+- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
+ }
+
+ static struct resource uart1_resources[] = {
+@@ -655,22 +917,29 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9261_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+- .platform_data = &uart1_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart1_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+ };
+
+-static inline void configure_usart1_pins(void)
++static inline void configure_usart1_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */
+ }
+
+ static struct resource uart2_resources[] = {
+@@ -690,28 +959,35 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9261_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+- .platform_data = &uart2_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart2_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+ };
+
+-static inline void configure_usart2_pins(void)
++static inline void configure_usart2_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
+ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/
++ if (pins & ATMEL_UART_CTS)
++ at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */
+ }
+
+-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
++static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+ struct platform_device *atmel_default_console_device; /* the serial console device */
+
+-void __init at91_init_serial(struct at91_uart_config *config)
++void __init __deprecated at91_init_serial(struct at91_uart_config *config)
+ {
+ int i;
+
+@@ -719,17 +995,17 @@
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+- configure_usart0_pins();
++ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_uarts[i] = &at91sam9261_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
+ break;
+ case 1:
+- configure_usart1_pins();
++ configure_usart1_pins(0);
+ at91_uarts[i] = &at91sam9261_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
+ break;
+ case 2:
+- configure_usart2_pins();
++ configure_usart2_pins(0);
+ at91_uarts[i] = &at91sam9261_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
+ break;
+@@ -751,6 +1027,48 @@
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+ }
+
++void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0: /* DBGU */
++ pdev = &at91sam9261_dbgu_device;
++ configure_dbgu_pins();
++ at91_clock_associate("mck", &pdev->dev, "usart");
++ break;
++ case AT91SAM9261_ID_US0:
++ pdev = &at91sam9261_uart0_device;
++ configure_usart0_pins(pins);
++ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
++ break;
++ case AT91SAM9261_ID_US1:
++ pdev = &at91sam9261_uart1_device;
++ configure_usart1_pins(pins);
++ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
++ break;
++ case AT91SAM9261_ID_US2:
++ pdev = &at91sam9261_uart2_device;
++ configure_usart2_pins(pins);
++ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
++ break;
++ default:
++ return;
++ }
++ pdev->id = portnr; /* update to mapped ID */
++
++ if (portnr < ATMEL_MAX_UART)
++ at91_uarts[portnr] = pdev;
++}
++
++void __init at91_set_serial_console(unsigned portnr)
++{
++ if (portnr < ATMEL_MAX_UART)
++ atmel_default_console_device = at91_uarts[portnr];
++ if (!atmel_default_console_device)
++ printk(KERN_INFO "AT91: No default serial console defined.\n");
++}
++
+ void __init at91_add_device_serial(void)
+ {
+ int i;
+@@ -761,7 +1079,9 @@
+ }
+ }
+ #else
+-void __init at91_init_serial(struct at91_uart_config *config) {}
++void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
++void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
++void __init at91_set_serial_console(unsigned portnr) {}
+ void __init at91_add_device_serial(void) {}
+ #endif
+
+@@ -774,6 +1094,9 @@
+ */
+ static int __init at91_add_standard_devices(void)
+ {
++ at91_add_device_rtt();
++ at91_add_device_watchdog();
++ at91_add_device_tc();
+ return 0;
+ }
+
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9263.c linux-2.6/arch/arm/mach-at91/at91sam9263.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam9263.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91sam9263.c 2008-03-01 19:03:55.000000000 +0200
+@@ -11,12 +11,14 @@
+ */
+
+ #include <linux/module.h>
++#include <linux/pm.h>
+
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+ #include <asm/arch/at91sam9263.h>
+ #include <asm/arch/at91_pmc.h>
+ #include <asm/arch/at91_rstc.h>
++#include <asm/arch/at91_shdwc.h>
+
+ #include "generic.h"
+ #include "clock.h"
+@@ -271,6 +273,11 @@
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+ }
+
++static void at91sam9263_poweroff(void)
++{
++ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
++}
++
+
+ /* --------------------------------------------------------------------
+ * AT91SAM9263 processor initialization
+@@ -282,6 +289,7 @@
+ iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+
+ at91_arch_reset = at91sam9263_reset;
++ pm_power_off = at91sam9263_poweroff;
+ at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
+
+ /* Init clock subsystem */
+@@ -304,34 +312,34 @@
+ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+- 0, /* Parallel IO Controller A */
+- 0, /* Parallel IO Controller B */
+- 0, /* Parallel IO Controller C, D and E */
++ 1, /* Parallel IO Controller A */
++ 1, /* Parallel IO Controller B */
++ 1, /* Parallel IO Controller C, D and E */
+ 0,
+ 0,
+- 6, /* USART 0 */
+- 6, /* USART 1 */
+- 6, /* USART 2 */
++ 5, /* USART 0 */
++ 5, /* USART 1 */
++ 5, /* USART 2 */
+ 0, /* Multimedia Card Interface 0 */
+ 0, /* Multimedia Card Interface 1 */
+- 4, /* CAN */
+- 0, /* Two-Wire Interface */
+- 6, /* Serial Peripheral Interface 0 */
+- 6, /* Serial Peripheral Interface 1 */
+- 5, /* Serial Synchronous Controller 0 */
+- 5, /* Serial Synchronous Controller 1 */
+- 6, /* AC97 Controller */
++ 3, /* CAN */
++ 6, /* Two-Wire Interface */
++ 5, /* Serial Peripheral Interface 0 */
++ 5, /* Serial Peripheral Interface 1 */
++ 4, /* Serial Synchronous Controller 0 */
++ 4, /* Serial Synchronous Controller 1 */
++ 5, /* AC97 Controller */
+ 0, /* Timer Counter 0, 1 and 2 */
+ 0, /* Pulse Width Modulation Controller */
+ 3, /* Ethernet */
+ 0,
+ 0, /* 2D Graphic Engine */
+- 3, /* USB Device Port */
++ 2, /* USB Device Port */
+ 0, /* Image Sensor Interface */
+ 3, /* LDC Controller */
+ 0, /* DMA Controller */
+ 0,
+- 3, /* USB Host port */
++ 2, /* USB Host port */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+ 0, /* Advanced Interrupt Controller (IRQ1) */
+ };
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam9263_devices.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c 2008-03-01 22:09:36.000000000 +0200
+@@ -12,6 +12,7 @@
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+
++#include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c-gpio.h>
+
+@@ -21,7 +22,7 @@
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+ #include <asm/arch/at91sam9263.h>
+-#include <asm/arch/at91sam926x_mc.h>
++#include <asm/arch/at91sam926x_smc.h>
+ #include <asm/arch/at91sam9263_matrix.h>
+
+ #include "generic.h"
+@@ -32,7 +33,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+-static u64 ohci_dmamask = 0xffffffffUL;
++static u64 ohci_dmamask = DMA_BIT_MASK(32);
+ static struct at91_usbh_data usbh_data;
+
+ static struct resource usbh_resources[] = {
+@@ -53,7 +54,7 @@
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+@@ -136,7 +137,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+-static u64 eth_dmamask = 0xffffffffUL;
++static u64 eth_dmamask = DMA_BIT_MASK(32);
+ static struct at91_eth_data eth_data;
+
+ static struct resource eth_resources[] = {
+@@ -157,7 +158,7 @@
+ .id = -1,
+ .dev = {
+ .dma_mask = &eth_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &eth_data,
+ },
+ .resource = eth_resources,
+@@ -210,7 +211,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+-static u64 mmc_dmamask = 0xffffffffUL;
++static u64 mmc_dmamask = DMA_BIT_MASK(32);
+ static struct at91_mmc_data mmc0_data, mmc1_data;
+
+ static struct resource mmc0_resources[] = {
+@@ -231,7 +232,7 @@
+ .id = 0,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc0_data,
+ },
+ .resource = mmc0_resources,
+@@ -256,7 +257,7 @@
+ .id = 1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc1_data,
+ },
+ .resource = mmc1_resources,
+@@ -357,10 +358,15 @@
+ #define NAND_BASE AT91_CHIPSELECT_3
+
+ static struct resource nand_resources[] = {
+- {
++ [0] = {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91_BASE_SYS + AT91_ECC0,
++ .end = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
++ .flags = IORESOURCE_MEM,
+ }
+ };
+
+@@ -382,7 +388,7 @@
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+- at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
++ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+@@ -500,7 +506,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+-static u64 spi_dmamask = 0xffffffffUL;
++static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+ static struct resource spi0_resources[] = {
+ [0] = {
+@@ -520,7 +526,7 @@
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+@@ -546,7 +552,7 @@
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+@@ -612,7 +618,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+-static u64 ac97_dmamask = 0xffffffffUL;
++static u64 ac97_dmamask = DMA_BIT_MASK(32);
+ static struct atmel_ac97_data ac97_data;
+
+ static struct resource ac97_resources[] = {
+@@ -633,7 +639,7 @@
+ .id = 1,
+ .dev = {
+ .dma_mask = &ac97_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ac97_data,
+ },
+ .resource = ac97_resources,
+@@ -663,11 +669,61 @@
+
+
+ /* --------------------------------------------------------------------
++ * Image Sensor Interface
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
++
++struct resource isi_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_ISI,
++ .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_ISI,
++ .end = AT91SAM9263_ID_ISI,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9263_isi_device = {
++ .name = "at91_isi",
++ .id = -1,
++ .resource = isi_resources,
++ .num_resources = ARRAY_SIZE(isi_resources),
++};
++
++void __init at91_add_device_isi(void)
++{
++ at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
++ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
++ at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
++ at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
++ at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
++ at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
++ at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
++ at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
++ at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
++ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
++ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
++ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
++ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
++ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
++ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
++ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
++}
++#else
++void __init at91_add_device_isi(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+-static u64 lcdc_dmamask = 0xffffffffUL;
++static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+ static struct atmel_lcdfb_info lcdc_data;
+
+ static struct resource lcdc_resources[] = {
+@@ -688,7 +744,7 @@
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+@@ -732,24 +788,227 @@
+
+
+ /* --------------------------------------------------------------------
+- * LEDs
++ * Timer/Counter block
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_ATMEL_TCLIB
++
++static struct resource tcb_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_TCB0,
++ .end = AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_TCB,
++ .end = AT91SAM9263_ID_TCB,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9263_tcb_device = {
++ .name = "atmel_tcb",
++ .id = 0,
++ .resource = tcb_resources,
++ .num_resources = ARRAY_SIZE(tcb_resources),
++};
++
++static void __init at91_add_device_tc(void)
++{
++ /* this chip has one clock and irq for all three TC channels */
++ at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk");
++ platform_device_register(&at91sam9263_tcb_device);
++}
++#else
++static void __init at91_add_device_tc(void) { }
++#endif
++
++/* --------------------------------------------------------------------
++ * RTT
++ * -------------------------------------------------------------------- */
++
++static struct resource rtt0_resources[] = {
++ {
++ .start = AT91_BASE_SYS + AT91_RTT0,
++ .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device at91sam9263_rtt0_device = {
++ .name = "at91_rtt",
++ .id = 0,
++ .resource = rtt0_resources,
++ .num_resources = ARRAY_SIZE(rtt0_resources),
++};
++
++static struct resource rtt1_resources[] = {
++ {
++ .start = AT91_BASE_SYS + AT91_RTT1,
++ .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device at91sam9263_rtt1_device = {
++ .name = "at91_rtt",
++ .id = 1,
++ .resource = rtt1_resources,
++ .num_resources = ARRAY_SIZE(rtt1_resources),
++};
++
++static void __init at91_add_device_rtt(void)
++{
++ device_init_wakeup(&at91sam9263_rtt0_device.dev, 1);
++ platform_device_register(&at91sam9263_rtt0_device);
++ device_init_wakeup(&at91sam9263_rtt1_device.dev, 1);
++ platform_device_register(&at91sam9263_rtt1_device);
++}
++
++
++/* --------------------------------------------------------------------
++ * Watchdog
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
++static struct platform_device at91sam9263_wdt_device = {
++ .name = "at91_wdt",
++ .id = -1,
++ .num_resources = 0,
++};
++
++static void __init at91_add_device_watchdog(void)
++{
++ platform_device_register(&at91sam9263_wdt_device);
++}
++#else
++static void __init at91_add_device_watchdog(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+-#if defined(CONFIG_LEDS)
+-u8 at91_leds_cpu;
+-u8 at91_leds_timer;
++#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
++static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
++static struct resource ssc0_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_SSC0,
++ .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_SSC0,
++ .end = AT91SAM9263_ID_SSC0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9263_ssc0_device = {
++ .name = "ssc",
++ .id = 0,
++ .dev = {
++ .dma_mask = &ssc0_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc0_resources,
++ .num_resources = ARRAY_SIZE(ssc0_resources),
++};
++
++static inline void configure_ssc0_pins(unsigned pins)
+ {
+- /* Enable GPIO to access the LEDs */
+- at91_set_gpio_output(cpu_led, 1);
+- at91_set_gpio_output(timer_led, 1);
++ if (pins & ATMEL_SSC_TF)
++ at91_set_B_periph(AT91_PIN_PB0, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_B_periph(AT91_PIN_PB1, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_B_periph(AT91_PIN_PB2, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_B_periph(AT91_PIN_PB3, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_B_periph(AT91_PIN_PB4, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_B_periph(AT91_PIN_PB5, 1);
++}
++
++static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+- at91_leds_cpu = cpu_led;
+- at91_leds_timer = timer_led;
++static struct resource ssc1_resources[] = {
++ [0] = {
++ .start = AT91SAM9263_BASE_SSC1,
++ .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9263_ID_SSC1,
++ .end = AT91SAM9263_ID_SSC1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9263_ssc1_device = {
++ .name = "ssc",
++ .id = 1,
++ .dev = {
++ .dma_mask = &ssc1_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc1_resources,
++ .num_resources = ARRAY_SIZE(ssc1_resources),
++};
++
++static inline void configure_ssc1_pins(unsigned pins)
++{
++ if (pins & ATMEL_SSC_TF)
++ at91_set_A_periph(AT91_PIN_PB6, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_A_periph(AT91_PIN_PB7, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_A_periph(AT91_PIN_PB8, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_A_periph(AT91_PIN_PB9, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_A_periph(AT91_PIN_PB10, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_A_periph(AT91_PIN_PB11, 1);
++}
++
++/*
++ * SSC controllers are accessed through library code, instead of any
++ * kind of all-singing/all-dancing driver. For example one could be
++ * used by a particular I2S audio codec's driver, while another one
++ * on the same system might be used by a custom data capture driver.
++ */
++void __init at91_add_device_ssc(unsigned id, unsigned pins)
++{
++ struct platform_device *pdev;
++
++ /*
++ * NOTE: caller is responsible for passing information matching
++ * "pins" to whatever will be using each particular controller.
++ */
++ switch (id) {
++ case AT91SAM9263_ID_SSC0:
++ pdev = &at91sam9263_ssc0_device;
++ configure_ssc0_pins(pins);
++ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
++ break;
++ case AT91SAM9263_ID_SSC1:
++ pdev = &at91sam9263_ssc1_device;
++ configure_ssc1_pins(pins);
++ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
++ break;
++ default:
++ return;
++ }
++
++ platform_device_register(pdev);
+ }
++
+ #else
+-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
++struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {}
+ #endif
+
+
+@@ -777,13 +1036,15 @@
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+ };
++static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9263_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+- .platform_data = &dbgu_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &dbgu_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+@@ -812,24 +1073,29 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9263_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+- .platform_data = &uart0_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart0_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+ };
+
+-static inline void configure_usart0_pins(void)
++static inline void configure_usart0_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
+- at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
+- at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
+ }
+
+ static struct resource uart1_resources[] = {
+@@ -849,24 +1115,29 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9263_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+- .platform_data = &uart1_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart1_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+ };
+
+-static inline void configure_usart1_pins(void)
++static inline void configure_usart1_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
+- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
+ }
+
+ static struct resource uart2_resources[] = {
+@@ -886,30 +1157,35 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9263_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+- .platform_data = &uart2_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart2_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+ };
+
+-static inline void configure_usart2_pins(void)
++static inline void configure_usart2_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
+- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
+ }
+
+-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
++static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+ struct platform_device *atmel_default_console_device; /* the serial console device */
+
+-void __init at91_init_serial(struct at91_uart_config *config)
++void __init __deprecated at91_init_serial(struct at91_uart_config *config)
+ {
+ int i;
+
+@@ -917,17 +1193,17 @@
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+- configure_usart0_pins();
++ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_uarts[i] = &at91sam9263_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
+ break;
+ case 1:
+- configure_usart1_pins();
++ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_uarts[i] = &at91sam9263_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
+ break;
+ case 2:
+- configure_usart2_pins();
++ configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_uarts[i] = &at91sam9263_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
+ break;
+@@ -949,6 +1225,48 @@
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+ }
+
++void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0: /* DBGU */
++ pdev = &at91sam9263_dbgu_device;
++ configure_dbgu_pins();
++ at91_clock_associate("mck", &pdev->dev, "usart");
++ break;
++ case AT91SAM9263_ID_US0:
++ pdev = &at91sam9263_uart0_device;
++ configure_usart0_pins(pins);
++ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
++ break;
++ case AT91SAM9263_ID_US1:
++ pdev = &at91sam9263_uart1_device;
++ configure_usart1_pins(pins);
++ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
++ break;
++ case AT91SAM9263_ID_US2:
++ pdev = &at91sam9263_uart2_device;
++ configure_usart2_pins(pins);
++ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
++ break;
++ default:
++ return;
++ }
++ pdev->id = portnr; /* update to mapped ID */
++
++ if (portnr < ATMEL_MAX_UART)
++ at91_uarts[portnr] = pdev;
++}
++
++void __init at91_set_serial_console(unsigned portnr)
++{
++ if (portnr < ATMEL_MAX_UART)
++ atmel_default_console_device = at91_uarts[portnr];
++ if (!atmel_default_console_device)
++ printk(KERN_INFO "AT91: No default serial console defined.\n");
++}
++
+ void __init at91_add_device_serial(void)
+ {
+ int i;
+@@ -959,7 +1277,9 @@
+ }
+ }
+ #else
+-void __init at91_init_serial(struct at91_uart_config *config) {}
++void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
++void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
++void __init at91_set_serial_console(unsigned portnr) {}
+ void __init at91_add_device_serial(void) {}
+ #endif
+
+@@ -971,6 +1291,9 @@
+ */
+ static int __init at91_add_standard_devices(void)
+ {
++ at91_add_device_rtt();
++ at91_add_device_watchdog();
++ at91_add_device_tc();
+ return 0;
+ }
+
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam926x_time.c linux-2.6/arch/arm/mach-at91/at91sam926x_time.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam926x_time.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91sam926x_time.c 2008-02-25 22:18:18.000000000 +0200
+@@ -1,23 +1,20 @@
+ /*
+- * linux/arch/arm/mach-at91/at91sam926x_time.c
++ * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x
+ *
+ * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
+ * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
++ * Converted to ClockSource/ClockEvents by David Brownell.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+-
+-#include <linux/init.h>
+ #include <linux/interrupt.h>
+ #include <linux/irq.h>
+ #include <linux/kernel.h>
+-#include <linux/sched.h>
+-#include <linux/time.h>
++#include <linux/clk.h>
++#include <linux/clockchips.h>
+
+-#include <asm/hardware.h>
+-#include <asm/io.h>
+ #include <asm/mach/time.h>
+
+ #include <asm/arch/at91_pit.h>
+@@ -26,88 +23,166 @@
+ #define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
+ #define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)
+
++static u32 pit_cycle; /* write-once */
++static u32 pit_cnt; /* access only w/system irq blocked */
++
++
+ /*
+- * Returns number of microseconds since last timer interrupt. Note that interrupts
+- * will have been disabled by do_gettimeofday()
+- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
++ * Clocksource: just a monotonic counter of MCK/16 cycles.
++ * We don't care whether or not PIT irqs are enabled.
+ */
+-static unsigned long at91sam926x_gettimeoffset(void)
++static cycle_t read_pit_clk(void)
+ {
+- unsigned long elapsed;
+- unsigned long t = at91_sys_read(AT91_PIT_PIIR);
++ unsigned long flags;
++ u32 elapsed;
++ u32 t;
++
++ raw_local_irq_save(flags);
++ elapsed = pit_cnt;
++ t = at91_sys_read(AT91_PIT_PIIR);
++ raw_local_irq_restore(flags);
++
++ elapsed += PIT_PICNT(t) * pit_cycle;
++ elapsed += PIT_CPIV(t);
++ return elapsed;
++}
+
+- elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
++static struct clocksource pit_clk = {
++ .name = "pit",
++ .rating = 175,
++ .read = read_pit_clk,
++ .shift = 20,
++ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
++};
++
++
++/*
++ * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16)
++ */
++static void
++pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
++{
++ unsigned long flags;
+
+- return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
++ switch (mode) {
++ case CLOCK_EVT_MODE_PERIODIC:
++ case CLOCK_EVT_MODE_RESUME:
++ /* update clocksource counter, then enable the IRQ */
++ raw_local_irq_save(flags);
++ pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
++ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
++ | AT91_PIT_PITIEN);
++ raw_local_irq_restore(flags);
++ break;
++ case CLOCK_EVT_MODE_ONESHOT:
++ BUG();
++ /* FALLTHROUGH */
++ case CLOCK_EVT_MODE_SHUTDOWN:
++ case CLOCK_EVT_MODE_UNUSED:
++ /* disable irq, leaving the clocksource active */
++ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
++ break;
++ }
+ }
+
++static struct clock_event_device pit_clkevt = {
++ .name = "pit",
++ .features = CLOCK_EVT_FEAT_PERIODIC,
++ .shift = 32,
++ .rating = 100,
++ .cpumask = CPU_MASK_CPU0,
++ .set_mode = pit_clkevt_mode,
++};
++
++
+ /*
+ * IRQ handler for the timer.
+ */
+-static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
++static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
+ {
+- volatile long nr_ticks;
+
+- if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */
+- write_seqlock(&xtime_lock);
++ /* The PIT interrupt may be disabled, and is shared */
++ if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
++ && (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
++ unsigned nr_ticks;
+
+- /* Get number to ticks performed before interrupt and clear PIT interrupt */
++ /* Get number of ticks performed before irq, and ack it */
+ nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
+ do {
+- timer_tick();
++ pit_cnt += pit_cycle;
++ pit_clkevt.event_handler(&pit_clkevt);
+ nr_ticks--;
+ } while (nr_ticks);
+
+- write_sequnlock(&xtime_lock);
+ return IRQ_HANDLED;
+- } else
+- return IRQ_NONE; /* not handled */
++ }
++
++ return IRQ_NONE;
+ }
+
+-static struct irqaction at91sam926x_timer_irq = {
++static struct irqaction at91sam926x_pit_irq = {
+ .name = "at91_tick",
+ .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+- .handler = at91sam926x_timer_interrupt
++ .handler = at91sam926x_pit_interrupt
+ };
+
+-void at91sam926x_timer_reset(void)
++static void at91sam926x_pit_reset(void)
+ {
+- /* Disable timer */
++ /* Disable timer and irqs */
+ at91_sys_write(AT91_PIT_MR, 0);
+
+- /* Clear any pending interrupts */
+- (void) at91_sys_read(AT91_PIT_PIVR);
++ /* Clear any pending interrupts, wait for PIT to stop counting */
++ while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0)
++ cpu_relax();
+
+- /* Set Period Interval timer and enable its interrupt */
+- at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
++ /* Start PIT but don't enable IRQ */
++ at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+ }
+
+ /*
+- * Set up timer interrupt.
++ * Set up both clocksource and clockevent support.
+ */
+-void __init at91sam926x_timer_init(void)
++static void __init at91sam926x_pit_init(void)
+ {
++ unsigned long pit_rate;
++ unsigned bits;
++
++ /*
++ * Use our actual MCK to figure out how many MCK/16 ticks per
++ * 1/HZ period (instead of a compile-time constant LATCH).
++ */
++ pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16;
++ pit_cycle = (pit_rate + HZ/2) / HZ;
++ WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
++
+ /* Initialize and enable the timer */
+- at91sam926x_timer_reset();
++ at91sam926x_pit_reset();
+
+- /* Make IRQs happen for the system timer. */
+- setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
++ /*
++ * Register clocksource. The high order bits of PIV are unused,
++ * so this isn't a 32-bit counter unless we get clockevent irqs.
++ */
++ pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift);
++ bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */;
++ pit_clk.mask = CLOCKSOURCE_MASK(bits);
++ clocksource_register(&pit_clk);
++
++ /* Set up irq handler */
++ setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq);
++
++ /* Set up and register clockevents */
++ pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
++ clockevents_register_device(&pit_clkevt);
+ }
+
+-#ifdef CONFIG_PM
+-static void at91sam926x_timer_suspend(void)
++static void at91sam926x_pit_suspend(void)
+ {
+ /* Disable timer */
+ at91_sys_write(AT91_PIT_MR, 0);
+ }
+-#else
+-#define at91sam926x_timer_suspend NULL
+-#endif
+
+ struct sys_timer at91sam926x_timer = {
+- .init = at91sam926x_timer_init,
+- .offset = at91sam926x_gettimeoffset,
+- .suspend = at91sam926x_timer_suspend,
+- .resume = at91sam926x_timer_reset,
++ .init = at91sam926x_pit_init,
++ .suspend = at91sam926x_pit_suspend,
++ .resume = at91sam926x_pit_reset,
+ };
+-
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9rl.c linux-2.6/arch/arm/mach-at91/at91sam9rl.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam9rl.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91sam9rl.c 2008-03-01 19:04:12.000000000 +0200
+@@ -10,6 +10,7 @@
+ */
+
+ #include <linux/module.h>
++#include <linux/pm.h>
+
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+@@ -17,6 +18,7 @@
+ #include <asm/arch/at91sam9rl.h>
+ #include <asm/arch/at91_pmc.h>
+ #include <asm/arch/at91_rstc.h>
++#include <asm/arch/at91_shdwc.h>
+
+ #include "generic.h"
+ #include "clock.h"
+@@ -244,6 +246,11 @@
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+ }
+
++static void at91sam9rl_poweroff(void)
++{
++ at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
++}
++
+
+ /* --------------------------------------------------------------------
+ * AT91SAM9RL processor initialization
+@@ -274,6 +281,7 @@
+ iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
+
+ at91_arch_reset = at91sam9rl_reset;
++ pm_power_off = at91sam9rl_poweroff;
+ at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
+
+ /* Init clock subsystem */
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c
+--- linux-2.6.24/arch/arm/mach-at91/at91sam9rl_devices.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c 2008-03-01 22:10:11.000000000 +0200
+@@ -9,6 +9,7 @@
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
+
++#include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c-gpio.h>
+
+@@ -19,7 +20,7 @@
+ #include <asm/arch/gpio.h>
+ #include <asm/arch/at91sam9rl.h>
+ #include <asm/arch/at91sam9rl_matrix.h>
+-#include <asm/arch/at91sam926x_mc.h>
++#include <asm/arch/at91sam926x_smc.h>
+
+ #include "generic.h"
+
+@@ -29,7 +30,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+-static u64 mmc_dmamask = 0xffffffffUL;
++static u64 mmc_dmamask = DMA_BIT_MASK(32);
+ static struct at91_mmc_data mmc_data;
+
+ static struct resource mmc_resources[] = {
+@@ -50,7 +51,7 @@
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+@@ -104,10 +105,15 @@
+ #define NAND_BASE AT91_CHIPSELECT_3
+
+ static struct resource nand_resources[] = {
+- {
++ [0] = {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91_BASE_SYS + AT91_ECC,
++ .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
++ .flags = IORESOURCE_MEM,
+ }
+ };
+
+@@ -247,7 +253,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+-static u64 spi_dmamask = 0xffffffffUL;
++static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+ static struct resource spi_resources[] = {
+ [0] = {
+@@ -267,7 +273,7 @@
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi_resources,
+ .num_resources = ARRAY_SIZE(spi_resources),
+@@ -312,7 +318,7 @@
+ * -------------------------------------------------------------------- */
+
+ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+-static u64 lcdc_dmamask = 0xffffffffUL;
++static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+ static struct atmel_lcdfb_info lcdc_data;
+
+ static struct resource lcdc_resources[] = {
+@@ -340,7 +346,7 @@
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+- .coherent_dma_mask = 0xffffffff,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+@@ -384,24 +390,244 @@
+
+
+ /* --------------------------------------------------------------------
+- * LEDs
++ * Timer/Counter block
++ * -------------------------------------------------------------------- */
++
++#ifdef CONFIG_ATMEL_TCLIB
++
++static struct resource tcb_resources[] = {
++ [0] = {
++ .start = AT91SAM9RL_BASE_TCB0,
++ .end = AT91SAM9RL_BASE_TCB0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9RL_ID_TC0,
++ .end = AT91SAM9RL_ID_TC0,
++ .flags = IORESOURCE_IRQ,
++ },
++ [2] = {
++ .start = AT91SAM9RL_ID_TC1,
++ .end = AT91SAM9RL_ID_TC1,
++ .flags = IORESOURCE_IRQ,
++ },
++ [3] = {
++ .start = AT91SAM9RL_ID_TC2,
++ .end = AT91SAM9RL_ID_TC2,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9rl_tcb_device = {
++ .name = "atmel_tcb",
++ .id = 0,
++ .resource = tcb_resources,
++ .num_resources = ARRAY_SIZE(tcb_resources),
++};
++
++static void __init at91_add_device_tc(void)
++{
++ /* this chip has a separate clock and irq for each TC channel */
++ at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk");
++ at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk");
++ at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk");
++ platform_device_register(&at91sam9rl_tcb_device);
++}
++#else
++static void __init at91_add_device_tc(void) { }
++#endif
++
++
++/* --------------------------------------------------------------------
++ * RTC
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
++static struct platform_device at91sam9rl_rtc_device = {
++ .name = "at91_rtc",
++ .id = -1,
++ .num_resources = 0,
++};
++
++static void __init at91_add_device_rtc(void)
++{
++ device_init_wakeup(&at91sam9rl_rtc_device.dev, 1);
++ platform_device_register(&at91sam9rl_rtc_device);
++}
++#else
++static void __init at91_add_device_rtc(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * RTT
++ * -------------------------------------------------------------------- */
++
++static struct resource rtt_resources[] = {
++ {
++ .start = AT91_BASE_SYS + AT91_RTT,
++ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device at91sam9rl_rtt_device = {
++ .name = "at91_rtt",
++ .id = -1,
++ .resource = rtt_resources,
++ .num_resources = ARRAY_SIZE(rtt_resources),
++};
++
++static void __init at91_add_device_rtt(void)
++{
++ device_init_wakeup(&at91sam9rl_rtt_device.dev, 1);
++ platform_device_register(&at91sam9rl_rtt_device);
++}
++
++
++/* --------------------------------------------------------------------
++ * Watchdog
++ * -------------------------------------------------------------------- */
++
++#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
++static struct platform_device at91sam9rl_wdt_device = {
++ .name = "at91_wdt",
++ .id = -1,
++ .num_resources = 0,
++};
++
++static void __init at91_add_device_watchdog(void)
++{
++ platform_device_register(&at91sam9rl_wdt_device);
++}
++#else
++static void __init at91_add_device_watchdog(void) {}
++#endif
++
++
++/* --------------------------------------------------------------------
++ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+-#if defined(CONFIG_LEDS)
+-u8 at91_leds_cpu;
+-u8 at91_leds_timer;
++#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
++static u64 ssc0_dmamask = DMA_BIT_MASK(32);
++
++static struct resource ssc0_resources[] = {
++ [0] = {
++ .start = AT91SAM9RL_BASE_SSC0,
++ .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9RL_ID_SSC0,
++ .end = AT91SAM9RL_ID_SSC0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9rl_ssc0_device = {
++ .name = "ssc",
++ .id = 0,
++ .dev = {
++ .dma_mask = &ssc0_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc0_resources,
++ .num_resources = ARRAY_SIZE(ssc0_resources),
++};
++
++static inline void configure_ssc0_pins(unsigned pins)
++{
++ if (pins & ATMEL_SSC_TF)
++ at91_set_A_periph(AT91_PIN_PC0, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_A_periph(AT91_PIN_PC1, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_A_periph(AT91_PIN_PA15, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_A_periph(AT91_PIN_PA16, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_B_periph(AT91_PIN_PA10, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_B_periph(AT91_PIN_PA22, 1);
++}
++
++static u64 ssc1_dmamask = DMA_BIT_MASK(32);
++
++static struct resource ssc1_resources[] = {
++ [0] = {
++ .start = AT91SAM9RL_BASE_SSC1,
++ .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AT91SAM9RL_ID_SSC1,
++ .end = AT91SAM9RL_ID_SSC1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device at91sam9rl_ssc1_device = {
++ .name = "ssc",
++ .id = 1,
++ .dev = {
++ .dma_mask = &ssc1_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++ .resource = ssc1_resources,
++ .num_resources = ARRAY_SIZE(ssc1_resources),
++};
++
++static inline void configure_ssc1_pins(unsigned pins)
++{
++ if (pins & ATMEL_SSC_TF)
++ at91_set_B_periph(AT91_PIN_PA29, 1);
++ if (pins & ATMEL_SSC_TK)
++ at91_set_B_periph(AT91_PIN_PA30, 1);
++ if (pins & ATMEL_SSC_TD)
++ at91_set_B_periph(AT91_PIN_PA13, 1);
++ if (pins & ATMEL_SSC_RD)
++ at91_set_B_periph(AT91_PIN_PA14, 1);
++ if (pins & ATMEL_SSC_RK)
++ at91_set_B_periph(AT91_PIN_PA9, 1);
++ if (pins & ATMEL_SSC_RF)
++ at91_set_B_periph(AT91_PIN_PA8, 1);
++}
+
+-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
++/*
++ * SSC controllers are accessed through library code, instead of any
++ * kind of all-singing/all-dancing driver. For example one could be
++ * used by a particular I2S audio codec's driver, while another one
++ * on the same system might be used by a custom data capture driver.
++ */
++void __init at91_add_device_ssc(unsigned id, unsigned pins)
+ {
+- /* Enable GPIO to access the LEDs */
+- at91_set_gpio_output(cpu_led, 1);
+- at91_set_gpio_output(timer_led, 1);
++ struct platform_device *pdev;
+
+- at91_leds_cpu = cpu_led;
+- at91_leds_timer = timer_led;
++ /*
++ * NOTE: caller is responsible for passing information matching
++ * "pins" to whatever will be using each particular controller.
++ */
++ switch (id) {
++ case AT91SAM9RL_ID_SSC0:
++ pdev = &at91sam9rl_ssc0_device;
++ configure_ssc0_pins(pins);
++ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
++ break;
++ case AT91SAM9RL_ID_SSC1:
++ pdev = &at91sam9rl_ssc1_device;
++ configure_ssc1_pins(pins);
++ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
++ break;
++ default:
++ return;
++ }
++
++ platform_device_register(pdev);
+ }
++
+ #else
+-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
++struct platform_device *__init at91_add_device_ssc(unsigned id, unsigned pins) {}
+ #endif
+
+
+@@ -428,13 +654,15 @@
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+ };
++static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9rl_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+- .platform_data = &dbgu_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &dbgu_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+@@ -463,24 +691,37 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9rl_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+- .platform_data = &uart0_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart0_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+ };
+
+-static inline void configure_usart0_pins(void)
++static inline void configure_usart0_pins(unsigned pins)
+ {
+- at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
+- at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
+- at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
+- at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
++ at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
++ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
++ if (pins & ATMEL_UART_DSR)
++ at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */
++ if (pins & ATMEL_UART_DTR)
++ at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */
++ if (pins & ATMEL_UART_DCD)
++ at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */
++ if (pins & ATMEL_UART_RI)
++ at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */
+ }
+
+ static struct resource uart1_resources[] = {
+@@ -500,22 +741,29 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9rl_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+- .platform_data = &uart1_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart1_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+ };
+
+-static inline void configure_usart1_pins(void)
++static inline void configure_usart1_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */
+ }
+
+ static struct resource uart2_resources[] = {
+@@ -535,22 +783,29 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9rl_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+- .platform_data = &uart2_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart2_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+ };
+
+-static inline void configure_usart2_pins(void)
++static inline void configure_usart2_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */
+ }
+
+ static struct resource uart3_resources[] = {
+@@ -570,28 +825,35 @@
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+ };
++static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
+ static struct platform_device at91sam9rl_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+- .platform_data = &uart3_data,
+- .coherent_dma_mask = 0xffffffff,
++ .dma_mask = &uart3_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &uart3_data,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+ };
+
+-static inline void configure_usart3_pins(void)
++static inline void configure_usart3_pins(unsigned pins)
+ {
+ at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
++
++ if (pins & ATMEL_UART_RTS)
++ at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */
++ if (pins & ATMEL_UART_CTS)
++ at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */
+ }
+
+-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
++static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+ struct platform_device *atmel_default_console_device; /* the serial console device */
+
+-void __init at91_init_serial(struct at91_uart_config *config)
++void __init __deprecated at91_init_serial(struct at91_uart_config *config)
+ {
+ int i;
+
+@@ -599,22 +861,22 @@
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+- configure_usart0_pins();
++ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_uarts[i] = &at91sam9rl_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
+ break;
+ case 1:
+- configure_usart1_pins();
++ configure_usart1_pins(0);
+ at91_uarts[i] = &at91sam9rl_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
+ break;
+ case 2:
+- configure_usart2_pins();
++ configure_usart2_pins(0);
+ at91_uarts[i] = &at91sam9rl_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
+ break;
+ case 3:
+- configure_usart3_pins();
++ configure_usart3_pins(0);
+ at91_uarts[i] = &at91sam9rl_uart3_device;
+ at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
+ break;
+@@ -636,6 +898,53 @@
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+ }
+
++void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
++{
++ struct platform_device *pdev;
++
++ switch (id) {
++ case 0: /* DBGU */
++ pdev = &at91sam9rl_dbgu_device;
++ configure_dbgu_pins();
++ at91_clock_associate("mck", &pdev->dev, "usart");
++ break;
++ case AT91SAM9RL_ID_US0:
++ pdev = &at91sam9rl_uart0_device;
++ configure_usart0_pins(pins);
++ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
++ break;
++ case AT91SAM9RL_ID_US1:
++ pdev = &at91sam9rl_uart1_device;
++ configure_usart1_pins(pins);
++ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
++ break;
++ case AT91SAM9RL_ID_US2:
++ pdev = &at91sam9rl_uart2_device;
++ configure_usart2_pins(pins);
++ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
++ break;
++ case AT91SAM9RL_ID_US3:
++ pdev = &at91sam9rl_uart3_device;
++ configure_usart3_pins(pins);
++ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
++ break;
++ default:
++ return;
++ }
++ pdev->id = portnr; /* update to mapped ID */
++
++ if (portnr < ATMEL_MAX_UART)
++ at91_uarts[portnr] = pdev;
++}
++
++void __init at91_set_serial_console(unsigned portnr)
++{
++ if (portnr < ATMEL_MAX_UART)
++ atmel_default_console_device = at91_uarts[portnr];
++ if (!atmel_default_console_device)
++ printk(KERN_INFO "AT91: No default serial console defined.\n");
++}
++
+ void __init at91_add_device_serial(void)
+ {
+ int i;
+@@ -646,7 +955,9 @@
+ }
+ }
+ #else
+-void __init at91_init_serial(struct at91_uart_config *config) {}
++void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
++void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
++void __init at91_set_serial_console(unsigned portnr) {}
+ void __init at91_add_device_serial(void) {}
+ #endif
+
+@@ -659,6 +970,10 @@
+ */
+ static int __init at91_add_standard_devices(void)
+ {
++ at91_add_device_rtc();
++ at91_add_device_rtt();
++ at91_add_device_watchdog();
++ at91_add_device_tc();
+ return 0;
+ }
+
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-cam60.c linux-2.6/arch/arm/mach-at91/board-cam60.c
+--- linux-2.6.24/arch/arm/mach-at91/board-cam60.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-cam60.c 2008-03-01 20:40:51.000000000 +0200
+@@ -0,0 +1,188 @@
++/*
++ * KwikByte CAM60
++ *
++ * based on board-sam9260ek.c
++ * Copyright (C) 2005 SAN People
++ * Copyright (C) 2006 Atmel
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "generic.h"
++
++
++/*
++ * Serial port configuration.
++ * 0 .. 5 = USART0 .. USART5
++ * 6 = DBGU
++ */
++static struct at91_uart_config __initdata cam60_uart_config = {
++ .console_tty = 0, /* ttyS0 */
++ .nr_tty = 1,
++ .tty_map = { 6, -1, -1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
++};
++
++static void __init cam60_map_io(void)
++{
++ /* Initialize processor: 10 MHz crystal */
++ at91sam9260_initialize(10000000);
++
++ /* Setup the serial ports and console */
++ at91_init_serial(&cam60_uart_config);
++}
++
++static void __init cam60_init_irq(void)
++{
++ at91sam9260_init_interrupts(NULL);
++}
++
++
++/*
++ * USB Host
++ */
++static struct at91_usbh_data __initdata cam60_usbh_data = {
++ .ports = 1,
++};
++
++
++/*
++ * SPI devices.
++ */
++#if defined(CONFIG_MTD_DATAFLASH)
++static struct mtd_partition __initdata cam60_spi_partitions[] = {
++ {
++ .name = "BOOT1",
++ .offset = 0,
++ .size = 4 * 1056,
++ },
++ {
++ .name = "BOOT2",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 256 * 1056,
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 2222 * 1056,
++ },
++ {
++ .name = "file system",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
++ .name = "spi_flash",
++ .parts = cam60_spi_partitions,
++ .nr_parts = ARRAY_SIZE(cam60_spi_partitions)
++};
++#endif
++
++static struct spi_board_info cam60_spi_devices[] = {
++#if defined(CONFIG_MTD_DATAFLASH)
++ { /* DataFlash chip */
++ .modalias = "mtd_dataflash",
++ .chip_select = 0,
++ .max_speed_hz = 15 * 1000 * 1000,
++ .bus_num = 0,
++ .platform_data = &cam60_spi_flash_platform_data
++ },
++#endif
++};
++
++
++/*
++ * MACB Ethernet device
++ */
++static struct __initdata at91_eth_data cam60_macb_data = {
++ .phy_irq_pin = AT91_PIN_PB5,
++ .is_rmii = 0,
++};
++
++
++/*
++ * NAND Flash
++ */
++static struct mtd_partition __initdata cam60_nand_partition[] = {
++ {
++ .name = "nand_fs",
++ .offset = 0,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
++{
++ *num_partitions = ARRAY_SIZE(cam60_nand_partition);
++ return cam60_nand_partition;
++}
++
++static struct at91_nand_data __initdata cam60_nand_data = {
++ .ale = 21,
++ .cle = 22,
++ // .det_pin = ... not there
++ .rdy_pin = AT91_PIN_PA9,
++ .enable_pin = AT91_PIN_PA7,
++ .partition_info = nand_partitions,
++};
++
++
++static void __init cam60_board_init(void)
++{
++ /* Serial */
++ at91_add_device_serial();
++ /* SPI */
++ at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
++ /* Ethernet */
++ at91_add_device_eth(&cam60_macb_data);
++ /* USB Host */
++ /* enable USB power supply circuit */
++ at91_set_gpio_output(AT91_PIN_PB18, 1);
++ at91_add_device_usbh(&cam60_usbh_data);
++ /* NAND */
++ at91_add_device_nand(&cam60_nand_data);
++}
++
++MACHINE_START(CAM60, "KwikByte CAM60")
++ /* Maintainer: KwikByte */
++ .phys_io = AT91_BASE_SYS,
++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++ .boot_params = AT91_SDRAM_BASE + 0x100,
++ .timer = &at91sam926x_timer,
++ .map_io = cam60_map_io,
++ .init_irq = cam60_init_irq,
++ .init_machine = cam60_board_init,
++MACHINE_END
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/arm/mach-at91/board-cap9adk.c
+--- linux-2.6.24/arch/arm/mach-at91/board-cap9adk.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-cap9adk.c 2008-03-01 20:43:07.000000000 +0200
+@@ -0,0 +1,359 @@
++/*
++ * linux/arch/arm/mach-at91/board-cap9adk.c
++ *
++ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
++ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
++ * Copyright (C) 2005 SAN People
++ * Copyright (C) 2007 Atmel Corporation.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/ads7846.h>
++#include <linux/fb.h>
++#include <linux/mtd/physmap.h>
++
++#include <video/atmel_lcdc.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91cap9_matrix.h>
++#include <asm/arch/at91sam926x_smc.h>
++
++#include "generic.h"
++
++
++static void __init cap9adk_map_io(void)
++{
++ /* Initialize processor: 12 MHz crystal */
++ at91cap9_initialize(12000000);
++
++ /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
++ at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
++ /* ... POWER LED always on */
++ at91_set_gpio_output(AT91_PIN_PC29, 1);
++
++ /* Setup the serial ports and console */
++ at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */
++ at91_set_serial_console(0);
++}
++
++static void __init cap9adk_init_irq(void)
++{
++ at91cap9_init_interrupts(NULL);
++}
++
++
++/*
++ * USB Host port
++ */
++static struct at91_usbh_data __initdata cap9adk_usbh_data = {
++ .ports = 2,
++};
++
++
++/*
++ * ADS7846 Touchscreen
++ */
++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
++static int ads7843_pendown_state(void)
++{
++ return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */
++}
++
++static struct ads7846_platform_data ads_info = {
++ .model = 7843,
++ .x_min = 150,
++ .x_max = 3830,
++ .y_min = 190,
++ .y_max = 3830,
++ .vref_delay_usecs = 100,
++ .x_plate_ohms = 450,
++ .y_plate_ohms = 250,
++ .pressure_max = 15000,
++ .debounce_max = 1,
++ .debounce_rep = 0,
++ .debounce_tol = (~0),
++ .get_pendown_state = ads7843_pendown_state,
++};
++
++static void __init cap9adk_add_device_ts(void)
++{
++ at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */
++ at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */
++}
++#else
++static void __init cap9adk_add_device_ts(void) {}
++#endif
++
++
++/*
++ * SPI devices.
++ */
++static struct spi_board_info cap9adk_spi_devices[] = {
++#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
++ { /* DataFlash card */
++ .modalias = "mtd_dataflash",
++ .chip_select = 0,
++ .max_speed_hz = 15 * 1000 * 1000,
++ .bus_num = 0,
++ },
++#endif
++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
++ {
++ .modalias = "ads7846",
++ .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */
++ .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
++ .bus_num = 0,
++ .platform_data = &ads_info,
++ .irq = AT91_PIN_PC4,
++ },
++#endif
++};
++
++
++/*
++ * MCI (SD/MMC)
++ */
++static struct at91_mmc_data __initdata cap9adk_mmc_data = {
++ .wire4 = 1,
++// .det_pin = ... not connected
++// .wp_pin = ... not connected
++// .vcc_pin = ... not connected
++};
++
++
++/*
++ * MACB Ethernet device
++ */
++static struct at91_eth_data __initdata cap9adk_macb_data = {
++ .is_rmii = 1,
++};
++
++
++/*
++ * NAND flash
++ */
++static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
++ {
++ .name = "NAND partition",
++ .offset = 0,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
++{
++ *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions);
++ return cap9adk_nand_partitions;
++}
++
++static struct at91_nand_data __initdata cap9adk_nand_data = {
++ .ale = 21,
++ .cle = 22,
++// .det_pin = ... not connected
++// .rdy_pin = ... not connected
++ .enable_pin = AT91_PIN_PD15,
++ .partition_info = nand_partitions,
++#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
++ .bus_width_16 = 1,
++#else
++ .bus_width_16 = 0,
++#endif
++};
++
++
++/*
++ * NOR flash
++ */
++static struct mtd_partition cap9adk_nor_partitions[] = {
++ {
++ .name = "NOR partition",
++ .offset = 0,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct physmap_flash_data cap9adk_nor_data = {
++ .width = 2,
++ .parts = cap9adk_nor_partitions,
++ .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions),
++};
++
++#define NOR_BASE AT91_CHIPSELECT_0
++#define NOR_SIZE 0x800000
++
++static struct resource nor_flash_resources[] = {
++ {
++ .start = NOR_BASE,
++ .end = NOR_BASE + NOR_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct platform_device cap9adk_nor_flash = {
++ .name = "physmap-flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &cap9adk_nor_data,
++ },
++ .resource = nor_flash_resources,
++ .num_resources = ARRAY_SIZE(nor_flash_resources),
++};
++
++static __init void cap9adk_add_device_nor(void)
++{
++ unsigned long csa;
++
++ csa = at91_sys_read(AT91_MATRIX_EBICSA);
++ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
++
++ /* set the bus interface characteristics */
++ at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2)
++ | AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
++
++ at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10)
++ | AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
++
++ at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
++
++ at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE
++ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
++ | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
++
++ platform_device_register(&cap9adk_nor_flash);
++}
++
++
++/*
++ * LCD Controller
++ */
++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
++static struct fb_videomode at91_tft_vga_modes[] = {
++ {
++ .name = "TX09D50VM1CCA @ 60",
++ .refresh = 60,
++ .xres = 240, .yres = 320,
++ .pixclock = KHZ2PICOS(4965),
++
++ .left_margin = 1, .right_margin = 33,
++ .upper_margin = 1, .lower_margin = 0,
++ .hsync_len = 5, .vsync_len = 1,
++
++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ .vmode = FB_VMODE_NONINTERLACED,
++ },
++};
++
++static struct fb_monspecs at91fb_default_monspecs = {
++ .manufacturer = "HIT",
++ .monitor = "TX09D70VM1CCA",
++
++ .modedb = at91_tft_vga_modes,
++ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
++ .hfmin = 15000,
++ .hfmax = 64000,
++ .vfmin = 50,
++ .vfmax = 150,
++};
++
++#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
++ | ATMEL_LCDC_DISTYPE_TFT \
++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
++
++static void at91_lcdc_power_control(int on)
++{
++ if (on)
++ at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
++ else
++ at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
++}
++
++/* Driver datas */
++static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = {
++ .default_bpp = 16,
++ .default_dmacon = ATMEL_LCDC_DMAEN,
++ .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2,
++ .default_monspecs = &at91fb_default_monspecs,
++ .atmel_lcdfb_power_control = at91_lcdc_power_control,
++ .guard_time = 1,
++};
++
++#else
++static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
++#endif
++
++
++/*
++ * AC97
++ */
++static struct atmel_ac97_data cap9adk_ac97_data = {
++// .reset_pin = ... not connected
++};
++
++
++static void __init cap9adk_board_init(void)
++{
++ /* Serial */
++ at91_add_device_serial();
++ /* USB Host */
++ set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
++ at91_add_device_usbh(&cap9adk_usbh_data);
++ /* SPI */
++ at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
++ /* Touchscreen */
++ cap9adk_add_device_ts();
++ /* MMC */
++ at91_add_device_mmc(1, &cap9adk_mmc_data);
++ /* Ethernet */
++ at91_add_device_eth(&cap9adk_macb_data);
++ /* NAND */
++ at91_add_device_nand(&cap9adk_nand_data);
++ /* NOR Flash */
++ cap9adk_add_device_nor();
++ /* I2C */
++ at91_add_device_i2c(NULL, 0);
++ /* LCD Controller */
++ set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
++ at91_add_device_lcdc(&cap9adk_lcdc_data);
++ /* AC97 */
++ at91_add_device_ac97(&cap9adk_ac97_data);
++}
++
++MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
++ /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
++ .phys_io = AT91_BASE_SYS,
++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++ .boot_params = AT91_SDRAM_BASE + 0x100,
++ .timer = &at91sam926x_timer,
++ .map_io = cap9adk_map_io,
++ .init_irq = cap9adk_init_irq,
++ .init_machine = cap9adk_board_init,
++MACHINE_END
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-chub.c linux-2.6/arch/arm/mach-at91/board-chub.c
+--- linux-2.6.24/arch/arm/mach-at91/board-chub.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-chub.c 2007-12-31 15:18:42.000000000 +0200
+@@ -0,0 +1,132 @@
++/*
++ * linux/arch/arm/mach-at91/board-chub.c
++ *
++ * Copyright (C) 2005 SAN People, adapted for Promwad Chub board
++ * by Kuten Ivan
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "generic.h"
++
++/*
++ * Serial port configuration.
++ * 0 .. 3 = USART0 .. USART3
++ * 4 = DBGU
++ */
++static struct at91_uart_config __initdata chub_uart_config = {
++ .console_tty = 0, /* ttyS0 */
++ .nr_tty = 5,
++ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */
++};
++
++static void __init chub_init_irq(void)
++{
++ at91rm9200_init_interrupts(NULL);
++}
++
++static void __init chub_map_io(void)
++{
++ /* Initialize clocks: 18.432 MHz crystal */
++ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
++
++ /* Setup the serial ports and console */
++ at91_init_serial(&chub_uart_config);
++}
++
++static struct at91_eth_data __initdata chub_eth_data = {
++ .phy_irq_pin = AT91_PIN_PB29,
++ .is_rmii = 0,
++};
++
++static struct mtd_partition __initdata chub_nand_partition[] = {
++ {
++ .name = "NAND Partition 1",
++ .offset = 0,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
++{
++ *num_partitions = ARRAY_SIZE(chub_nand_partition);
++ return chub_nand_partition;
++}
++
++static struct at91_nand_data __initdata chub_nand_data = {
++ .ale = 22,
++ .cle = 21,
++ .enable_pin = AT91_PIN_PA27,
++ .partition_info = nand_partitions,
++};
++
++static struct spi_board_info chub_spi_devices[] = {
++ { /* DataFlash chip */
++ .modalias = "mtd_dataflash",
++ .chip_select = 0,
++ .max_speed_hz = 15 * 1000 * 1000,
++ },
++};
++
++static void __init chub_board_init(void)
++{
++ /* Serial */
++ at91_add_device_serial();
++ /* I2C */
++ at91_add_device_i2c(NULL, 0);
++ /* Ethernet */
++ at91_add_device_eth(&chub_eth_data);
++ /* SPI */
++ at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices));
++ /* NAND Flash */
++ at91_add_device_nand(&chub_nand_data);
++ /* Disable write protect for NAND */
++ at91_set_gpio_output(AT91_PIN_PB7, 1);
++ /* Power enable for 3x RS-232 and 1x RS-485 */
++ at91_set_gpio_output(AT91_PIN_PB9, 1);
++ /* Disable write protect for FRAM */
++ at91_set_gpio_output(AT91_PIN_PA21, 1);
++ /* Disable write protect for Dataflash */
++ at91_set_gpio_output(AT91_PIN_PA19, 1);
++}
++
++MACHINE_START(CHUB, "Promwad Chub")
++ /* Maintainer: Ivan Kuten AT Promwad DOT com */
++ .phys_io = AT91_BASE_SYS,
++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++ .boot_params = AT91_SDRAM_BASE + 0x100,
++ .timer = &at91rm9200_timer,
++ .map_io = chub_map_io,
++ .init_irq = chub_init_irq,
++ .init_machine = chub_board_init,
++MACHINE_END
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-csb337.c linux-2.6/arch/arm/mach-at91/board-csb337.c
+--- linux-2.6.24/arch/arm/mach-at91/board-csb337.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-csb337.c 2008-03-01 22:04:55.000000000 +0200
+@@ -24,6 +24,9 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
++#include <linux/interrupt.h>
++#include <linux/input.h>
++#include <linux/gpio_keys.h>
+ #include <linux/mtd/physmap.h>
+
+ #include <asm/hardware.h>
+@@ -59,6 +62,7 @@
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
++ at91_set_gpio_output(AT91_PIN_PB2, 1); /* third (unused) LED */
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&csb337_uart_config);
+@@ -156,6 +160,84 @@
+ .num_resources = ARRAY_SIZE(csb_flash_resources),
+ };
+
++static struct gpio_led csb337_leds[] = {
++ { /* "led0", yellow */
++ .name = "led0",
++ .gpio = AT91_PIN_PB2,
++ .active_low = 1,
++ .default_trigger = "heartbeat",
++ },
++ { /* "led1", green */
++ .name = "led1",
++ .gpio = AT91_PIN_PB1,
++ .active_low = 1,
++ .default_trigger = "mmc0",
++ },
++ { /* "led2", yellow */
++ .name = "led2",
++ .gpio = AT91_PIN_PB0,
++ .active_low = 1,
++ .default_trigger = "ide-disk",
++ }
++};
++
++/*
++ * GPIO Buttons
++ */
++#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
++static struct gpio_keys_button csb300_buttons[] = {
++ {
++ .gpio = AT91_PIN_PB29,
++ .code = BTN_0,
++ .desc = "sw0",
++ .active_low = 1,
++ .wakeup = 1,
++ },
++ {
++ .gpio = AT91_PIN_PB28,
++ .code = BTN_1,
++ .desc = "sw1",
++ .active_low = 1,
++ .wakeup = 1,
++ },
++ {
++ .gpio = AT91_PIN_PA21,
++ .code = BTN_2,
++ .desc = "sw2",
++ .active_low = 1,
++ .wakeup = 1,
++ }
++};
++
++static struct gpio_keys_platform_data csb300_button_data = {
++ .buttons = csb300_buttons,
++ .nbuttons = ARRAY_SIZE(csb300_buttons),
++};
++
++static struct platform_device csb300_button_device = {
++ .name = "gpio-keys",
++ .id = -1,
++ .num_resources = 0,
++ .dev = {
++ .platform_data = &csb300_button_data,
++ }
++};
++
++static void __init csb300_add_device_buttons(void)
++{
++ at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */
++ at91_set_deglitch(AT91_PIN_PB29, 1);
++ at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */
++ at91_set_deglitch(AT91_PIN_PB28, 1);
++ at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */
++ at91_set_deglitch(AT91_PIN_PA21, 1);
++
++ platform_device_register(&csb300_button_device);
++}
++#else
++static void __init csb300_add_device_buttons(void) {}
++#endif
++
+ static void __init csb337_board_init(void)
+ {
+ /* Serial */
+@@ -175,8 +257,12 @@
+ at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(0, &csb337_mmc_data);
++ /* LEDS */
++ at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds));
+ /* NOR flash */
+ platform_device_register(&csb_flash);
++ /* Switches on CSB300 */
++ csb300_add_device_buttons();
+ }
+
+ MACHINE_START(CSB337, "Cogent CSB337")
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/mach-at91/board-dk.c
+--- linux-2.6.24/arch/arm/mach-at91/board-dk.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-dk.c 2008-02-18 23:23:26.000000000 +0200
+@@ -25,6 +25,7 @@
+ #include <linux/init.h>
+ #include <linux/mm.h>
+ #include <linux/module.h>
++#include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
+ #include <linux/mtd/physmap.h>
+@@ -73,6 +74,185 @@
+ at91rm9200_init_interrupts(NULL);
+ }
+
++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
++#include <video/s1d13xxxfb.h>
++#include <asm/arch/ics1523.h>
++
++/* EPSON S1D13806 FB */
++#define AT91_FB_REG_BASE 0x30000000L
++#define AT91_FB_REG_SIZE 0x200
++#define AT91_FB_VMEM_BASE 0x30200000L
++#define AT91_FB_VMEM_SIZE 0x140000L
++
++static void __init dk_init_video(void)
++{
++ /* NWAIT Signal */
++ at91_set_A_periph(AT91_PIN_PC6, 0);
++
++ /* Initialization of the Static Memory Controller for Chip Select 2 */
++ at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
++ | AT91_SMC_WSEN | AT91_SMC_NWS_(4) /* wait states */
++ | AT91_SMC_TDF_(1) /* float time */
++ );
++
++ at91_ics1523_init();
++}
++
++/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
++ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
++static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
++ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
++ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
++ {S1DREG_GPIO_CNF0, 0x00},
++ {S1DREG_GPIO_CNF1, 0x00},
++ {S1DREG_GPIO_CTL0, 0x08},
++ {S1DREG_GPIO_CTL1, 0x00},
++ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
++ {S1DREG_LCD_CLK_CNF, 0x00},
++ {S1DREG_CRT_CLK_CNF, 0x00},
++ {S1DREG_MPLUG_CLK_CNF, 0x00},
++ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
++ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
++ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
++ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
++ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
++ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
++ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
++ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
++ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
++ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
++ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
++ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
++ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
++ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
++ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
++ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
++ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
++ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
++ {S1DREG_LCD_DISP_START0, 0x00},
++ {S1DREG_LCD_DISP_START1, 0xC8},
++ {S1DREG_LCD_DISP_START2, 0x00},
++ {S1DREG_LCD_MEM_OFF0, 0x80},
++ {S1DREG_LCD_MEM_OFF1, 0x02},
++ {S1DREG_LCD_PIX_PAN, 0x00},
++ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
++ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
++ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
++ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
++ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
++ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
++ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
++ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
++ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
++ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
++ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
++ {S1DREG_TV_OUT_CTL, 0x10},
++ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
++ {S1DREG_CRT_DISP_START0, 0x00},
++ {S1DREG_CRT_DISP_START1, 0x00},
++ {S1DREG_CRT_DISP_START2, 0x00},
++ {S1DREG_CRT_MEM_OFF0, 0x80},
++ {S1DREG_CRT_MEM_OFF1, 0x02},
++ {S1DREG_CRT_PIX_PAN, 0x00},
++ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
++ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
++ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
++ {S1DREG_LCD_CUR_START, 0x01},
++ {S1DREG_LCD_CUR_XPOS0, 0x00},
++ {S1DREG_LCD_CUR_XPOS1, 0x00},
++ {S1DREG_LCD_CUR_YPOS0, 0x00},
++ {S1DREG_LCD_CUR_YPOS1, 0x00},
++ {S1DREG_LCD_CUR_BCTL0, 0x00},
++ {S1DREG_LCD_CUR_GCTL0, 0x00},
++ {S1DREG_LCD_CUR_RCTL0, 0x00},
++ {S1DREG_LCD_CUR_BCTL1, 0x1F},
++ {S1DREG_LCD_CUR_GCTL1, 0x3F},
++ {S1DREG_LCD_CUR_RCTL1, 0x1F},
++ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
++ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
++ {S1DREG_CRT_CUR_START, 0x01},
++ {S1DREG_CRT_CUR_XPOS0, 0x00},
++ {S1DREG_CRT_CUR_XPOS1, 0x00},
++ {S1DREG_CRT_CUR_YPOS0, 0x00},
++ {S1DREG_CRT_CUR_YPOS1, 0x00},
++ {S1DREG_CRT_CUR_BCTL0, 0x00},
++ {S1DREG_CRT_CUR_GCTL0, 0x00},
++ {S1DREG_CRT_CUR_RCTL0, 0x00},
++ {S1DREG_CRT_CUR_BCTL1, 0x1F},
++ {S1DREG_CRT_CUR_GCTL1, 0x3F},
++ {S1DREG_CRT_CUR_RCTL1, 0x1F},
++ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
++ {S1DREG_BBLT_CTL0, 0x00},
++ {S1DREG_BBLT_CTL0, 0x00},
++ {S1DREG_BBLT_CC_EXP, 0x00},
++ {S1DREG_BBLT_OP, 0x00},
++ {S1DREG_BBLT_SRC_START0, 0x00},
++ {S1DREG_BBLT_SRC_START1, 0x00},
++ {S1DREG_BBLT_SRC_START2, 0x00},
++ {S1DREG_BBLT_DST_START0, 0x00},
++ {S1DREG_BBLT_DST_START1, 0x00},
++ {S1DREG_BBLT_DST_START2, 0x00},
++ {S1DREG_BBLT_MEM_OFF0, 0x00},
++ {S1DREG_BBLT_MEM_OFF1, 0x00},
++ {S1DREG_BBLT_WIDTH0, 0x00},
++ {S1DREG_BBLT_WIDTH1, 0x00},
++ {S1DREG_BBLT_HEIGHT0, 0x00},
++ {S1DREG_BBLT_HEIGHT1, 0x00},
++ {S1DREG_BBLT_BGC0, 0x00},
++ {S1DREG_BBLT_BGC1, 0x00},
++ {S1DREG_BBLT_FGC0, 0x00},
++ {S1DREG_BBLT_FGC1, 0x00},
++ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
++ {S1DREG_LKUP_ADDR, 0x00},
++ {S1DREG_PS_CNF, 0x00}, /* Power Save disable */
++ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
++ {S1DREG_CPU2MEM_WDOGT, 0x00},
++ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
++};
++
++static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
++ .initregs = dk_s1dfb_initregs,
++ .initregssize = ARRAY_SIZE(dk_s1dfb_initregs),
++ .platform_init_video = dk_init_video,
++};
++
++static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
++
++static struct resource dk_s1dfb_resource[] = {
++ [0] = { /* video mem */
++ .name = "s1d13806 memory",
++ .start = AT91_FB_VMEM_BASE,
++ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = { /* video registers */
++ .name = "s1d13806 registers",
++ .start = AT91_FB_REG_BASE,
++ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static struct platform_device dk_s1dfb_device = {
++ .name = "s1d13806fb",
++ .id = -1,
++ .dev = {
++ .dma_mask = &s1dfb_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &dk_s1dfb_pdata,
++ },
++ .resource = dk_s1dfb_resource,
++ .num_resources = ARRAY_SIZE(dk_s1dfb_resource),
++};
++
++static void __init dk_add_device_video(void)
++{
++ platform_device_register(&dk_s1dfb_device);
++}
++#else
++static void __init dk_add_device_video(void) {}
++#endif
++
+ static struct at91_eth_data __initdata dk_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+@@ -164,7 +344,7 @@
+ #define DK_FLASH_SIZE 0x200000
+
+ static struct physmap_flash_data dk_flash_data = {
+- .width = 2,
++ .width = 2,
+ };
+
+ static struct resource dk_flash_resource = {
+@@ -183,6 +363,14 @@
+ .num_resources = 1,
+ };
+
++static struct gpio_led dk_leds[] = {
++ {
++ .name = "led0",
++ .gpio = AT91_PIN_PB2,
++ .active_low = 1,
++ .default_trigger = "heartbeat",
++ }
++};
+
+ static void __init dk_board_init(void)
+ {
+@@ -213,8 +401,14 @@
+ at91_add_device_nand(&dk_nand_data);
+ /* NOR Flash */
+ platform_device_register(&dk_flash);
++ /* LEDs */
++ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
++ /* SSC (to LM4549 audio codec) */
++ at91_add_device_ssc(AT91RM9200_ID_SSC1, ATMEL_SSC_TD | ATMEL_SSC_RX);
++ /* SSC (to SI3021 line interface) */
++ at91_add_device_ssc(AT91RM9200_ID_SSC2, ATMEL_SSC_TD | ATMEL_SSC_TK | ATMEL_SSC_RD | ATMEL_SSC_RF);
+ /* VGA */
+-// dk_add_device_video();
++ dk_add_device_video();
+ }
+
+ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-ecbat91.c linux-2.6/arch/arm/mach-at91/board-ecbat91.c
+--- linux-2.6.24/arch/arm/mach-at91/board-ecbat91.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-ecbat91.c 2007-12-31 15:18:42.000000000 +0200
+@@ -0,0 +1,183 @@
++/*
++ * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
++ * Copyright (C) 2007 emQbit.com.
++ *
++ * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "generic.h"
++
++
++/*
++ * Serial port configuration.
++ * 0 .. 3 = USART0 .. USART3
++ * 4 = DBGU
++ */
++static struct at91_uart_config __initdata ecb_at91uart_config = {
++ .console_tty = 0, /* ttyS0 */
++ .nr_tty = 2,
++ .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
++};
++
++static void __init ecb_at91map_io(void)
++{
++ /* Initialize processor: 18.432 MHz crystal */
++ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
++
++ /* Setup the LEDs */
++ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
++
++ /* Setup the serial ports and console */
++ at91_init_serial(&ecb_at91uart_config);
++}
++
++static void __init ecb_at91init_irq(void)
++{
++ at91rm9200_init_interrupts(NULL);
++}
++
++static struct at91_eth_data __initdata ecb_at91eth_data = {
++ .phy_irq_pin = AT91_PIN_PC4,
++ .is_rmii = 0,
++};
++
++static struct at91_usbh_data __initdata ecb_at91usbh_data = {
++ .ports = 1,
++};
++
++static struct at91_mmc_data __initdata ecb_at91mmc_data = {
++ .slot_b = 0,
++ .wire4 = 1,
++};
++
++
++#if defined(CONFIG_MTD_DATAFLASH)
++static struct mtd_partition __initdata my_flash0_partitions[] =
++{
++ { /* 0x8400 */
++ .name = "Darrell-loader",
++ .offset = 0,
++ .size = 12* 1056,
++ },
++ {
++ .name = "U-boot",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 110 * 1056,
++ },
++ { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
++ .name = "Uoot-env",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 8 * 1056,
++ },
++ { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
++ .name = "Kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 1534 * 1056,
++ },
++ { /* 190200 - jffs2 root filesystem */
++ .name = "Filesystem",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL, /* 26 sectors */
++ }
++};
++
++static struct flash_platform_data __initdata my_flash0_platform = {
++ .name = "Removable flash card",
++ .parts = my_flash0_partitions,
++ .nr_parts = ARRAY_SIZE(my_flash0_partitions)
++};
++
++#endif
++
++static struct spi_board_info __initdata ecb_at91spi_devices[] = {
++ { /* DataFlash chip */
++ .modalias = "mtd_dataflash",
++ .chip_select = 0,
++ .max_speed_hz = 10 * 1000 * 1000,
++ .bus_num = 0,
++#if defined(CONFIG_MTD_DATAFLASH)
++ .platform_data = &my_flash0_platform,
++#endif
++ },
++ { /* User accessable spi - cs1 (250KHz) */
++ .modalias = "spi-cs1",
++ .chip_select = 1,
++ .max_speed_hz = 250 * 1000,
++ },
++ { /* User accessable spi - cs2 (1MHz) */
++ .modalias = "spi-cs2",
++ .chip_select = 2,
++ .max_speed_hz = 1 * 1000 * 1000,
++ },
++ { /* User accessable spi - cs3 (10MHz) */
++ .modalias = "spi-cs3",
++ .chip_select = 3,
++ .max_speed_hz = 10 * 1000 * 1000,
++ },
++};
++
++static void __init ecb_at91board_init(void)
++{
++ /* Serial */
++ at91_add_device_serial();
++
++ /* Ethernet */
++ at91_add_device_eth(&ecb_at91eth_data);
++
++ /* USB Host */
++ at91_add_device_usbh(&ecb_at91usbh_data);
++
++ /* I2C */
++ at91_add_device_i2c(NULL, 0);
++
++ /* MMC */
++ at91_add_device_mmc(0, &ecb_at91mmc_data);
++
++ /* SPI */
++ at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
++}
++
++MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
++ /* Maintainer: emQbit.com */
++ .phys_io = AT91_BASE_SYS,
++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++ .boot_params = AT91_SDRAM_BASE + 0x100,
++ .timer = &at91rm9200_timer,
++ .map_io = ecb_at91map_io,
++ .init_irq = ecb_at91init_irq,
++ .init_machine = ecb_at91board_init,
++MACHINE_END
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/mach-at91/board-ek.c
+--- linux-2.6.24/arch/arm/mach-at91/board-ek.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-ek.c 2008-02-18 22:26:42.000000000 +0200
+@@ -25,6 +25,7 @@
+ #include <linux/init.h>
+ #include <linux/mm.h>
+ #include <linux/module.h>
++#include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
+ #include <linux/mtd/physmap.h>
+@@ -73,6 +74,187 @@
+ at91rm9200_init_interrupts(NULL);
+ }
+
++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
++#include <video/s1d13xxxfb.h>
++#include <asm/arch/ics1523.h>
++
++/* EPSON S1D13806 FB */
++#define AT91_FB_REG_BASE 0x40000000L
++#define AT91_FB_REG_SIZE 0x200
++#define AT91_FB_VMEM_BASE 0x40200000L
++#define AT91_FB_VMEM_SIZE 0x140000L
++
++static void __init ek_init_video(void)
++{
++ /* NWAIT Signal */
++ at91_set_A_periph(AT91_PIN_PC6, 0);
++
++ /* Initialization of the Static Memory Controller for Chip Select 3 */
++ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16 /* 16 bit */
++ | AT91_SMC_WSEN | AT91_SMC_NWS_(5) /* wait states */
++ | AT91_SMC_TDF_(1) /* float time */
++ );
++
++ at91_ics1523_init();
++}
++
++/* CRT: (active) 640x480 60Hz (PCLK=CLKI=25.175MHz)
++ Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
++static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
++ {S1DREG_MISC, 0x00}, /* Enable Memory/Register select bit */
++ {S1DREG_COM_DISP_MODE, 0x00}, /* disable display output */
++ {S1DREG_GPIO_CNF0, 0xFF}, // 0x00
++ {S1DREG_GPIO_CNF1, 0x1F}, // 0x08
++ {S1DREG_GPIO_CTL0, 0x00},
++ {S1DREG_GPIO_CTL1, 0x00},
++ {S1DREG_CLK_CNF, 0x01}, /* no divide, MCLK source is CLKI3 0x02*/
++ {S1DREG_LCD_CLK_CNF, 0x00},
++ {S1DREG_CRT_CLK_CNF, 0x00},
++ {S1DREG_MPLUG_CLK_CNF, 0x00},
++ {S1DREG_CPU2MEM_WST_SEL, 0x01}, /* 2*period(MCLK) - 4ns > period(BCLK) */
++ {S1DREG_SDRAM_REF_RATE, 0x03}, /* 32768 <= MCLK <= 50000 (MHz) */
++ {S1DREG_SDRAM_TC0, 0x00}, /* MCLK source freq (MHz): */
++ {S1DREG_SDRAM_TC1, 0x01}, /* 42 <= MCLK <= 50 */
++ {S1DREG_MEM_CNF, 0x80}, /* SDRAM Initialization - needed before mem access */
++ {S1DREG_PANEL_TYPE, 0x25}, /* std TFT 16bit, 8bit SCP format 2, single passive LCD */
++ {S1DREG_MOD_RATE, 0x00}, /* toggle every FPFRAME */
++ {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* 680 pix */
++ {S1DREG_LCD_NDISP_HPER, 0x12}, /* 152 pix */
++ {S1DREG_TFT_FPLINE_START, 0x01}, /* 13 pix */
++ {S1DREG_TFT_FPLINE_PWIDTH, 0x0B}, /* 96 pix */
++ {S1DREG_LCD_DISP_VHEIGHT0, 0xDF},
++ {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* 480 lines */
++ {S1DREG_LCD_NDISP_VPER, 0x2C}, /* 44 lines */
++ {S1DREG_TFT_FPFRAME_START, 0x0A}, /* 10 lines */
++ {S1DREG_TFT_FPFRAME_PWIDTH, 0x01}, /* 2 lines */
++ {S1DREG_LCD_DISP_MODE, 0x05}, /* 16 bpp */
++ {S1DREG_LCD_MISC, 0x00}, /* dithering enabled, dual panel buffer enabled */
++ {S1DREG_LCD_DISP_START0, 0x00},
++ {S1DREG_LCD_DISP_START1, 0xC8},
++ {S1DREG_LCD_DISP_START2, 0x00},
++ {S1DREG_LCD_MEM_OFF0, 0x80},
++ {S1DREG_LCD_MEM_OFF1, 0x02},
++ {S1DREG_LCD_PIX_PAN, 0x00},
++ {S1DREG_LCD_DISP_FIFO_HTC, 0x3B},
++ {S1DREG_LCD_DISP_FIFO_LTC, 0x3C},
++ {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* 680 pix */
++ {S1DREG_CRT_NDISP_HPER, 0x13}, /* 160 pix */
++ {S1DREG_CRT_HRTC_START, 0x01}, /* 13 pix */
++ {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* 96 pix */
++ {S1DREG_CRT_DISP_VHEIGHT0, 0xDF},
++ {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* 480 lines */
++ {S1DREG_CRT_NDISP_VPER, 0x2B}, /* 44 lines */
++ {S1DREG_CRT_VRTC_START, 0x09}, /* 10 lines */
++ {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* 2 lines */
++ {S1DREG_TV_OUT_CTL, 0x10},
++ {0x005E, 0x9F},
++ {0x005F, 0x00},
++ {S1DREG_CRT_DISP_MODE, 0x05}, /* 16 bpp */
++ {S1DREG_CRT_DISP_START0, 0x00},
++ {S1DREG_CRT_DISP_START1, 0x00},
++ {S1DREG_CRT_DISP_START2, 0x00},
++ {S1DREG_CRT_MEM_OFF0, 0x80},
++ {S1DREG_CRT_MEM_OFF1, 0x02},
++ {S1DREG_CRT_PIX_PAN, 0x00},
++ {S1DREG_CRT_DISP_FIFO_HTC, 0x3B},
++ {S1DREG_CRT_DISP_FIFO_LTC, 0x3C},
++ {S1DREG_LCD_CUR_CTL, 0x00}, /* inactive */
++ {S1DREG_LCD_CUR_START, 0x01},
++ {S1DREG_LCD_CUR_XPOS0, 0x00},
++ {S1DREG_LCD_CUR_XPOS1, 0x00},
++ {S1DREG_LCD_CUR_YPOS0, 0x00},
++ {S1DREG_LCD_CUR_YPOS1, 0x00},
++ {S1DREG_LCD_CUR_BCTL0, 0x00},
++ {S1DREG_LCD_CUR_GCTL0, 0x00},
++ {S1DREG_LCD_CUR_RCTL0, 0x00},
++ {S1DREG_LCD_CUR_BCTL1, 0x1F},
++ {S1DREG_LCD_CUR_GCTL1, 0x3F},
++ {S1DREG_LCD_CUR_RCTL1, 0x1F},
++ {S1DREG_LCD_CUR_FIFO_HTC, 0x00},
++ {S1DREG_CRT_CUR_CTL, 0x00}, /* inactive */
++ {S1DREG_CRT_CUR_START, 0x01},
++ {S1DREG_CRT_CUR_XPOS0, 0x00},
++ {S1DREG_CRT_CUR_XPOS1, 0x00},
++ {S1DREG_CRT_CUR_YPOS0, 0x00},
++ {S1DREG_CRT_CUR_YPOS1, 0x00},
++ {S1DREG_CRT_CUR_BCTL0, 0x00},
++ {S1DREG_CRT_CUR_GCTL0, 0x00},
++ {S1DREG_CRT_CUR_RCTL0, 0x00},
++ {S1DREG_CRT_CUR_BCTL1, 0x1F},
++ {S1DREG_CRT_CUR_GCTL1, 0x3F},
++ {S1DREG_CRT_CUR_RCTL1, 0x1F},
++ {S1DREG_CRT_CUR_FIFO_HTC, 0x00},
++ {S1DREG_BBLT_CTL0, 0x00},
++ {S1DREG_BBLT_CTL0, 0x00},
++ {S1DREG_BBLT_CC_EXP, 0x00},
++ {S1DREG_BBLT_OP, 0x00},
++ {S1DREG_BBLT_SRC_START0, 0x00},
++ {S1DREG_BBLT_SRC_START1, 0x00},
++ {S1DREG_BBLT_SRC_START2, 0x00},
++ {S1DREG_BBLT_DST_START0, 0x00},
++ {S1DREG_BBLT_DST_START1, 0x00},
++ {S1DREG_BBLT_DST_START2, 0x00},
++ {S1DREG_BBLT_MEM_OFF0, 0x00},
++ {S1DREG_BBLT_MEM_OFF1, 0x00},
++ {S1DREG_BBLT_WIDTH0, 0x00},
++ {S1DREG_BBLT_WIDTH1, 0x00},
++ {S1DREG_BBLT_HEIGHT0, 0x00},
++ {S1DREG_BBLT_HEIGHT1, 0x00},
++ {S1DREG_BBLT_BGC0, 0x00},
++ {S1DREG_BBLT_BGC1, 0x00},
++ {S1DREG_BBLT_FGC0, 0x00},
++ {S1DREG_BBLT_FGC1, 0x00},
++ {S1DREG_LKUP_MODE, 0x00}, /* LCD LUT r | LCD and CRT/TV LUT w */
++ {S1DREG_LKUP_ADDR, 0x00},
++ {S1DREG_PS_CNF, 0x10}, /* Power Save disable */
++ {S1DREG_PS_STATUS, 0x02}, /* LCD Panel down, mem up */
++ {S1DREG_CPU2MEM_WDOGT, 0x00},
++ {S1DREG_COM_DISP_MODE, 0x02}, /* enable CRT display output */
++};
++
++static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
++ .initregs = ek_s1dfb_initregs,
++ .initregssize = ARRAY_SIZE(ek_s1dfb_initregs),
++ .platform_init_video = ek_init_video,
++};
++
++static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
++
++static struct resource ek_s1dfb_resource[] = {
++ [0] = { /* video mem */
++ .name = "s1d13806 memory",
++ .start = AT91_FB_VMEM_BASE,
++ .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = { /* video registers */
++ .name = "s1d13806 registers",
++ .start = AT91_FB_REG_BASE,
++ .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static struct platform_device ek_s1dfb_device = {
++ .name = "s1d13806fb",
++ .id = -1,
++ .dev = {
++ .dma_mask = &s1dfb_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &ek_s1dfb_pdata,
++ },
++ .resource = ek_s1dfb_resource,
++ .num_resources = ARRAY_SIZE(ek_s1dfb_resource),
++};
++
++static void __init ek_add_device_video(void)
++{
++ platform_device_register(&ek_s1dfb_device);
++}
++#else
++static void __init ek_add_device_video(void) {}
++#endif
++
+ static struct at91_eth_data __initdata ek_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+@@ -122,7 +304,7 @@
+ #define EK_FLASH_SIZE 0x200000
+
+ static struct physmap_flash_data ek_flash_data = {
+- .width = 2,
++ .width = 2,
+ };
+
+ static struct resource ek_flash_resource = {
+@@ -141,6 +323,25 @@
+ .num_resources = 1,
+ };
+
++static struct gpio_led ek_leds[] = {
++ { /* "user led 1", DS2 */
++ .name = "green",
++ .gpio = AT91_PIN_PB0,
++ .active_low = 1,
++ .default_trigger = "mmc0",
++ },
++ { /* "user led 2", DS4 */
++ .name = "yellow",
++ .gpio = AT91_PIN_PB1,
++ .active_low = 1,
++ .default_trigger = "heartbeat",
++ },
++ { /* "user led 3", DS6 */
++ .name = "red",
++ .gpio = AT91_PIN_PB2,
++ .active_low = 1,
++ }
++};
+
+ static void __init ek_board_init(void)
+ {
+@@ -167,8 +368,10 @@
+ #endif
+ /* NOR Flash */
+ platform_device_register(&ek_flash);
++ /* LEDs */
++ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* VGA */
+-// ek_add_device_video();
++ ek_add_device_video();
+ }
+
+ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-homematic.c linux-2.6/arch/arm/mach-at91/board-homematic.c
+--- linux-2.6.24/arch/arm/mach-at91/board-homematic.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-homematic.c 2007-12-31 15:18:42.000000000 +0200
+@@ -0,0 +1,163 @@
++/*
++ * linux/arch/arm/mach-at91/board-homematic.c
++ *
++ * Copyright (C) 2007 eQ-3 Entwicklung GmbH
++ *
++ * based on work
++ * Copyright (C) 2005 SAN People
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/mtd/physmap.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91rm9200_mc.h>
++
++#include "generic.h"
++
++
++/*
++ * Serial port configuration.
++ * 0 .. 3 = USART0 .. USART3
++ * 4 = DBGU
++ */
++static struct at91_uart_config __initdata homematic_uart_config = {
++ .console_tty = 0, /* ttyS0 */
++ .nr_tty = 2,
++ .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
++};
++
++static void __init homematic_map_io(void)
++{
++ /* Initialize processor: 18.432 MHz crystal */
++ at91rm9200_initialize(18432000, AT91RM9200_BGA);
++
++ /* Setup the serial ports and console */
++ at91_init_serial(&homematic_uart_config);
++}
++
++static void __init homematic_init_irq(void)
++{
++ at91rm9200_init_interrupts(NULL);
++}
++
++static struct at91_eth_data __initdata homematic_eth_data = {
++ .phy_irq_pin = AT91_PIN_PC4,
++ .is_rmii = 0,
++};
++
++static struct at91_usbh_data __initdata homematic_usbh_data = {
++ .ports = 2,
++};
++
++static struct at91_udc_data __initdata homematic_udc_data = {
++ .vbus_pin = AT91_PIN_PD4,
++ .pullup_pin = AT91_PIN_PD5,
++};
++
++static struct at91_mmc_data __initdata homematic_mmc_data = {
++ .slot_b = 0,
++ .wire4 = 1,
++};
++
++static struct spi_board_info homematic_spi_devices[] = {
++ { /* DataFlash chip */
++ .modalias = "mtd_dataflash",
++ .chip_select = 0,
++ .max_speed_hz = 15 * 1000 * 1000,
++ },
++};
++
++static struct mtd_partition __initdata homematic_nand_partition[] = {
++ {
++ .name = "root",
++ .offset = 0,
++ .size = 0x02000000,
++ }, {
++ .name = "storage",
++ .offset = 0x02000000,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
++{
++ *num_partitions = ARRAY_SIZE(homematic_nand_partition);
++ return homematic_nand_partition;
++}
++
++static struct at91_nand_data __initdata homematic_nand_data = {
++ .ale = 22,
++ .cle = 21,
++// .det_pin = AT91_PIN_PB1,
++ .rdy_pin = AT91_PIN_PC2,
++ .enable_pin = AT91_PIN_PC0,
++ .partition_info = nand_partitions,
++};
++
++static void __init homematic_board_init(void)
++{
++ /* Serial */
++ at91_add_device_serial();
++ /* Ethernet */
++ at91_add_device_eth(&homematic_eth_data);
++ /* USB Host */
++ at91_add_device_usbh(&homematic_usbh_data);
++ /* USB Device */
++ at91_add_device_udc(&homematic_udc_data);
++ at91_set_multi_drive(homematic_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
++ /* I2C */
++ at91_add_device_i2c(NULL, 0);
++ /* SPI */
++ at91_add_device_spi(homematic_spi_devices, ARRAY_SIZE(homematic_spi_devices));
++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
++ /* DataFlash card */
++ at91_set_gpio_output(AT91_PIN_PB7, 0);
++#else
++ /* MMC */
++ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
++ at91_add_device_mmc(0, &homematic_mmc_data);
++#endif
++ /* NAND */
++ at91_add_device_nand(&homematic_nand_data);
++}
++
++MACHINE_START(HOMEMATIC, "HomeMatic")
++ /* Maintainer: eQ-3 */
++ .phys_io = AT91_BASE_SYS,
++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++ .boot_params = AT91_SDRAM_BASE + 0x100,
++ .timer = &at91rm9200_timer,
++ .map_io = homematic_map_io,
++ .init_irq = homematic_init_irq,
++ .init_machine = homematic_board_init,
++MACHINE_END
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-kb9202.c linux-2.6/arch/arm/mach-at91/board-kb9202.c
+--- linux-2.6.24/arch/arm/mach-at91/board-kb9202.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-kb9202.c 2008-02-18 23:21:36.000000000 +0200
+@@ -37,6 +37,8 @@
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+
++#include <asm/arch/at91rm9200_mc.h>
++
+ #include "generic.h"
+
+
+@@ -111,6 +113,48 @@
+ .partition_info = nand_partitions,
+ };
+
++
++#if defined(CONFIG_FB_S1D15605)
++#warning "The Reset pin must be passed via platform_data, not this way"
++static struct resource kb9202_lcd_resources[] = {
++ [0] = {
++ .start = AT91_CHIPSELECT_2,
++ .end = AT91_CHIPSELECT_2 + 0x200FF,
++ .flags = IORESOURCE_MEM
++ },
++ [1] = { /* reset pin */
++ .start = AT91_PIN_PC22,
++ .end = AT91_PIN_PC22,
++ .flags = IORESOURCE_MEM
++ },
++};
++
++static struct platform_device kb9202_lcd_device = {
++ .name = "s1d15605fb",
++ .id = 0,
++ .num_resources = ARRAY_SIZE(kb9202_lcd_resources),
++ .resource = kb9202_lcd_resources,
++};
++
++static void __init kb9202_add_device_lcd(void)
++{
++ /* In case the boot loader did not set the chip select mode and timing */
++ at91_sys_write(AT91_SMC_CSR(2),
++ AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 |
++ AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1));
++
++ /* Backlight pin = output, off */
++ at91_set_gpio_output(AT91_PIN_PC23, 0);
++
++ /* Reset pin = output, in reset */
++ at91_set_gpio_output(AT91_PIN_PC22, 0);
++
++ platform_device_register(&kb9202_lcd_device);
++}
++#else
++static void __init kb9202_add_device_lcd(void) {}
++#endif
++
+ static void __init kb9202_board_init(void)
+ {
+ /* Serial */
+@@ -129,6 +173,8 @@
+ at91_add_device_spi(NULL, 0);
+ /* NAND */
+ at91_add_device_nand(&kb9202_nand_data);
++ /* LCD */
++ kb9202_add_device_lcd();
+ }
+
+ MACHINE_START(KB9200, "KB920x")
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9-l9260.c linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c
+--- linux-2.6.24/arch/arm/mach-at91/board-sam9-l9260.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c 2008-03-01 20:39:38.000000000 +0200
+@@ -0,0 +1,199 @@
++/*
++ * linux/arch/arm/mach-at91/board-sam9-l9260.c
++ *
++ * Copyright (C) 2005 SAN People
++ * Copyright (C) 2006 Atmel
++ * Copyright (C) 2007 Olimex Ltd
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#include "generic.h"
++
++
++/*
++ * Serial port configuration.
++ * 0 .. 5 = USART0 .. USART5
++ * 6 = DBGU
++ */
++static struct at91_uart_config __initdata ek_uart_config = {
++ .console_tty = 0, /* ttyS0 */
++ .nr_tty = 3,
++ .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
++};
++
++static void __init ek_map_io(void)
++{
++ /* Initialize processor: 18.432 MHz crystal */
++ at91sam9260_initialize(18432000);
++
++ /* Setup the LEDs */
++ at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
++
++ /* Setup the serial ports and console */
++ at91_init_serial(&ek_uart_config);
++}
++
++static void __init ek_init_irq(void)
++{
++ at91sam9260_init_interrupts(NULL);
++}
++
++
++/*
++ * USB Host port
++ */
++static struct at91_usbh_data __initdata ek_usbh_data = {
++ .ports = 2,
++};
++
++/*
++ * USB Device port
++ */
++static struct at91_udc_data __initdata ek_udc_data = {
++ .vbus_pin = AT91_PIN_PC5,
++ .pullup_pin = 0, /* pull-up driven by UDC */
++};
++
++
++/*
++ * SPI devices.
++ */
++static struct spi_board_info ek_spi_devices[] = {
++#if !defined(CONFIG_MMC_AT91)
++ { /* DataFlash chip */
++ .modalias = "mtd_dataflash",
++ .chip_select = 1,
++ .max_speed_hz = 15 * 1000 * 1000,
++ .bus_num = 0,
++ },
++#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
++ { /* DataFlash card */
++ .modalias = "mtd_dataflash",
++ .chip_select = 0,
++ .max_speed_hz = 15 * 1000 * 1000,
++ .bus_num = 0,
++ },
++#endif
++#endif
++};
++
++
++/*
++ * MACB Ethernet device
++ */
++static struct at91_eth_data __initdata ek_macb_data = {
++ .phy_irq_pin = AT91_PIN_PA7,
++ .is_rmii = 0,
++};
++
++
++/*
++ * NAND flash
++ */
++static struct mtd_partition __initdata ek_nand_partition[] = {
++ {
++ .name = "Bootloader Area",
++ .offset = 0,
++ .size = 10 * 1024 * 1024,
++ },
++ {
++ .name = "User Area",
++ .offset = 10 * 1024 * 1024,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
++{
++ *num_partitions = ARRAY_SIZE(ek_nand_partition);
++ return ek_nand_partition;
++}
++
++static struct at91_nand_data __initdata ek_nand_data = {
++ .ale = 21,
++ .cle = 22,
++// .det_pin = ... not connected
++ .rdy_pin = AT91_PIN_PC13,
++ .enable_pin = AT91_PIN_PC14,
++ .partition_info = nand_partitions,
++#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
++ .bus_width_16 = 1,
++#else
++ .bus_width_16 = 0,
++#endif
++};
++
++
++/*
++ * MCI (SD/MMC)
++ */
++static struct at91_mmc_data __initdata ek_mmc_data = {
++ .slot_b = 1,
++ .wire4 = 1,
++ .det_pin = AT91_PIN_PC8,
++ .wp_pin = AT91_PIN_PC4,
++// .vcc_pin = ... not connected
++};
++
++static void __init ek_board_init(void)
++{
++ /* Serial */
++ at91_add_device_serial();
++ /* USB Host */
++ at91_add_device_usbh(&ek_usbh_data);
++ /* USB Device */
++ at91_add_device_udc(&ek_udc_data);
++ /* SPI */
++ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
++ /* NAND */
++ at91_add_device_nand(&ek_nand_data);
++ /* Ethernet */
++ at91_add_device_eth(&ek_macb_data);
++ /* MMC */
++ at91_add_device_mmc(0, &ek_mmc_data);
++ /* I2C */
++ at91_add_device_i2c(NULL, 0);
++}
++
++MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
++ /* Maintainer: Olimex */
++ .phys_io = AT91_BASE_SYS,
++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++ .boot_params = AT91_SDRAM_BASE + 0x100,
++ .timer = &at91sam926x_timer,
++ .map_io = ek_map_io,
++ .init_irq = ek_init_irq,
++ .init_machine = ek_board_init,
++MACHINE_END
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arch/arm/mach-at91/board-sam9260ek.c
+--- linux-2.6.24/arch/arm/mach-at91/board-sam9260ek.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-sam9260ek.c 2008-03-01 20:40:19.000000000 +0200
+@@ -25,6 +25,8 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
++#include <linux/spi/at73c213.h>
++#include <linux/clk.h>
+
+ #include <asm/hardware.h>
+ #include <asm/setup.h>
+@@ -37,29 +39,29 @@
+
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+-#include <asm/arch/at91sam926x_mc.h>
++#include <asm/arch/at91_shdwc.h>
+
+ #include "generic.h"
+
+
+-/*
+- * Serial port configuration.
+- * 0 .. 5 = USART0 .. USART5
+- * 6 = DBGU
+- */
+-static struct at91_uart_config __initdata ek_uart_config = {
+- .console_tty = 0, /* ttyS0 */
+- .nr_tty = 3,
+- .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
+-};
+-
+ static void __init ek_map_io(void)
+ {
+ /* Initialize processor: 18.432 MHz crystal */
+ at91sam9260_initialize(18432000);
+
+- /* Setup the serial ports and console */
+- at91_init_serial(&ek_uart_config);
++ /* DGBU on ttyS0. (Rx & Tx only) */
++ at91_register_uart(0, 0, 0);
++
++ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
++ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
++ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
++ | ATMEL_UART_RI);
++
++ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
++ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
++
++ /* set serial console to ttyS0 (ie, DBGU) */
++ at91_set_serial_console(0);
+ }
+
+ static void __init ek_init_irq(void)
+@@ -85,6 +87,36 @@
+
+
+ /*
++ * Audio
++ */
++static struct at73c213_board_info at73c213_data = {
++ .ssc_id = 0,
++ .shortname = "AT91SAM9260-EK external DAC",
++};
++
++#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
++static void __init at73c213_set_clk(struct at73c213_board_info *info)
++{
++ struct clk *pck0;
++ struct clk *plla;
++
++ pck0 = clk_get(NULL, "pck0");
++ plla = clk_get(NULL, "plla");
++
++ /* AT73C213 MCK Clock */
++ at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */
++
++ clk_set_parent(pck0, plla);
++ clk_set_rate(pck0, 12416000);
++ clk_enable(pck0);
++
++ info->dac_clk = pck0;
++}
++#else
++static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
++#endif
++
++/*
+ * SPI devices.
+ */
+ static struct spi_board_info ek_spi_devices[] = {
+@@ -110,6 +142,8 @@
+ .chip_select = 0,
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 1,
++ .mode = SPI_MODE_1,
++ .platform_data = &at73c213_data,
+ },
+ #endif
+ };
+@@ -172,6 +206,24 @@
+ // .vcc_pin = ... not connected
+ };
+
++
++/*
++ * LEDs
++ */
++static struct gpio_led ek_leds[] = {
++ { /* "bottom" led, green, userled1 to be defined */
++ .name = "ds5",
++ .gpio = AT91_PIN_PA6,
++ .active_low = 1,
++ .default_trigger = "none",
++ },
++ { /* "power" led, yellow */
++ .name = "ds1",
++ .gpio = AT91_PIN_PA9,
++ .default_trigger = "heartbeat",
++ }
++};
++
+ static void __init ek_board_init(void)
+ {
+ /* Serial */
+@@ -190,6 +242,14 @@
+ at91_add_device_mmc(0, &ek_mmc_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
++ /* SSC (to AT73C213) */
++ at73c213_set_clk(&at73c213_data);
++ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
++ /* LEDs */
++ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
++ /* shutdown controller, wakeup button (5 msec low) */
++ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
++ | AT91_SHDW_RTTWKEN);
+ }
+
+ MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arch/arm/mach-at91/board-sam9261ek.c
+--- linux-2.6.24/arch/arm/mach-at91/board-sam9261ek.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-sam9261ek.c 2008-03-04 21:05:58.000000000 +0200
+@@ -26,6 +26,8 @@
+ #include <linux/platform_device.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/ads7846.h>
++#include <linux/spi/at73c213.h>
++#include <linux/clk.h>
+ #include <linux/dm9000.h>
+ #include <linux/fb.h>
+ #include <linux/gpio_keys.h>
+@@ -44,22 +46,12 @@
+
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+-#include <asm/arch/at91sam926x_mc.h>
++#include <asm/arch/at91sam926x_smc.h>
++#include <asm/arch/at91_shdwc.h>
+
+ #include "generic.h"
+
+
+-/*
+- * Serial port configuration.
+- * 0 .. 2 = USART0 .. USART2
+- * 3 = DBGU
+- */
+-static struct at91_uart_config __initdata ek_uart_config = {
+- .console_tty = 0, /* ttyS0 */
+- .nr_tty = 1,
+- .tty_map = { 3, -1, -1, -1 } /* ttyS0, ..., ttyS3 */
+-};
+-
+ static void __init ek_map_io(void)
+ {
+ /* Initialize processor: 18.432 MHz crystal */
+@@ -68,8 +60,11 @@
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
+
+- /* Setup the serial ports and console */
+- at91_init_serial(&ek_uart_config);
++ /* DGBU on ttyS0. (Rx & Tx only) */
++ at91_register_uart(0, 0, 0);
++
++ /* set serial console to ttyS0 (ie, DBGU) */
++ at91_set_serial_console(0);
+ }
+
+ static void __init ek_init_irq(void)
+@@ -239,6 +234,36 @@
+ #endif
+
+ /*
++ * Audio
++ */
++static struct at73c213_board_info at73c213_data = {
++ .ssc_id = 1,
++ .shortname = "AT91SAM9261-EK external DAC",
++};
++
++#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
++static void __init at73c213_set_clk(struct at73c213_board_info *info)
++{
++ struct clk *pck2;
++ struct clk *plla;
++
++ pck2 = clk_get(NULL, "pck2");
++ plla = clk_get(NULL, "plla");
++
++ /* AT73C213 MCK Clock */
++ at91_set_B_periph(AT91_PIN_PB31, 0); /* PCK2 */
++
++ clk_set_parent(pck2, plla);
++ clk_set_rate(pck2, 12416000);
++ clk_enable(pck2);
++
++ info->dac_clk = pck2;
++}
++#else
++static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
++#endif
++
++/*
+ * SPI devices
+ */
+ static struct spi_board_info ek_spi_devices[] = {
+@@ -256,6 +281,7 @@
+ .bus_num = 0,
+ .platform_data = &ads_info,
+ .irq = AT91SAM9261_ID_IRQ0,
++ .controller_data = (void *) AT91_PIN_PA28, /* CS pin */
+ },
+ #endif
+ #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+@@ -271,6 +297,9 @@
+ .chip_select = 3,
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
++ .mode = SPI_MODE_1,
++ .platform_data = &at73c213_data,
++ .controller_data = (void*) AT91_PIN_PA29, /* default for CS3 is PA6, but it must be PA29 */
+ },
+ #endif
+ };
+@@ -280,6 +309,68 @@
+ * LCD Controller
+ */
+ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
++
++#if defined(CONFIG_FB_ATMEL_STN)
++
++/* STN */
++static struct fb_videomode at91_stn_modes[] = {
++ {
++ .name = "SP06Q002 @ 75",
++ .refresh = 75,
++ .xres = 320, .yres = 240,
++ .pixclock = KHZ2PICOS(1440),
++
++ .left_margin = 1, .right_margin = 1,
++ .upper_margin = 0, .lower_margin = 0,
++ .hsync_len = 1, .vsync_len = 1,
++
++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ .vmode = FB_VMODE_NONINTERLACED,
++ },
++};
++
++static struct fb_monspecs at91fb_default_stn_monspecs = {
++ .manufacturer = "HIT",
++ .monitor = "SP06Q002",
++
++ .modedb = at91_stn_modes,
++ .modedb_len = ARRAY_SIZE(at91_stn_modes),
++ .hfmin = 15000,
++ .hfmax = 64000,
++ .vfmin = 50,
++ .vfmax = 150,
++};
++
++#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
++ | ATMEL_LCDC_DISTYPE_STNMONO \
++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \
++ | ATMEL_LCDC_IFWIDTH_4 \
++ | ATMEL_LCDC_SCANMOD_SINGLE)
++
++static void at91_lcdc_stn_power_control(int on)
++{
++ /* backlight */
++ if (on) { /* power up */
++ at91_set_gpio_value(AT91_PIN_PC14, 0);
++ at91_set_gpio_value(AT91_PIN_PC15, 0);
++ } else { /* power down */
++ at91_set_gpio_value(AT91_PIN_PC14, 1);
++ at91_set_gpio_value(AT91_PIN_PC15, 1);
++ }
++}
++
++static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++ .default_bpp = 1,
++ .default_dmacon = ATMEL_LCDC_DMAEN,
++ .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2,
++ .default_monspecs = &at91fb_default_stn_monspecs,
++ .atmel_lcdfb_power_control = at91_lcdc_stn_power_control,
++ .guard_time = 1,
++};
++
++#else
++
++/* TFT */
+ static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "TX09D50VM1CCA @ 60",
+@@ -296,7 +387,7 @@
+ },
+ };
+
+-static struct fb_monspecs at91fb_default_monspecs = {
++static struct fb_monspecs at91fb_default_tft_monspecs = {
+ .manufacturer = "HIT",
+ .monitor = "TX09D50VM1CCA",
+
+@@ -308,11 +399,11 @@
+ .vfmax = 150,
+ };
+
+-#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
++#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+-static void at91_lcdc_power_control(int on)
++static void at91_lcdc_tft_power_control(int on)
+ {
+ if (on)
+ at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
+@@ -320,15 +411,16 @@
+ at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
+ }
+
+-/* Driver datas */
+ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++ .lcdcon_is_backlight = true,
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+- .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
+- .default_monspecs = &at91fb_default_monspecs,
+- .atmel_lcdfb_power_control = at91_lcdc_power_control,
++ .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2,
++ .default_monspecs = &at91fb_default_tft_monspecs,
++ .atmel_lcdfb_power_control = at91_lcdc_tft_power_control,
+ .guard_time = 1,
+ };
++#endif
+
+ #else
+ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+@@ -342,25 +434,25 @@
+ static struct gpio_keys_button ek_buttons[] = {
+ {
+ .gpio = AT91_PIN_PA27,
+- .keycode = BTN_0,
++ .code = BTN_0,
+ .desc = "Button 0",
+ .active_low = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA26,
+- .keycode = BTN_1,
++ .code = BTN_1,
+ .desc = "Button 1",
+ .active_low = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA25,
+- .keycode = BTN_2,
++ .code = BTN_2,
+ .desc = "Button 2",
+ .active_low = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA24,
+- .keycode = BTN_3,
++ .code = BTN_3,
+ .desc = "Button 3",
+ .active_low = 1,
+ }
+@@ -397,6 +489,29 @@
+ static void __init ek_add_device_buttons(void) {}
+ #endif
+
++/*
++ * LEDs
++ */
++static struct gpio_led ek_leds[] = {
++ { /* "bottom" led, green, userled1 to be defined */
++ .name = "ds7",
++ .gpio = AT91_PIN_PA14,
++ .active_low = 1,
++ .default_trigger = "none",
++ },
++ { /* "top" led, green, userled2 to be defined */
++ .name = "ds8",
++ .gpio = AT91_PIN_PA13,
++ .active_low = 1,
++ .default_trigger = "none",
++ },
++ { /* "power" led, yellow */
++ .name = "ds1",
++ .gpio = AT91_PIN_PA23,
++ .default_trigger = "heartbeat",
++ }
++};
++
+ static void __init ek_board_init(void)
+ {
+ /* Serial */
+@@ -418,6 +533,9 @@
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* Touchscreen */
+ ek_add_device_ts();
++ /* SSC (to AT73C213) */
++ at73c213_set_clk(&at73c213_data);
++ at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
+ #else
+ /* MMC */
+ at91_add_device_mmc(0, &ek_mmc_data);
+@@ -426,6 +544,11 @@
+ at91_add_device_lcdc(&ek_lcdc_data);
+ /* Push Buttons */
+ ek_add_device_buttons();
++ /* LEDs */
++ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
++ /* shutdown controller, wakeup button (5 msec low) */
++ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
++ | AT91_SHDW_RTTWKEN);
+ }
+
+ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arch/arm/mach-at91/board-sam9263ek.c
+--- linux-2.6.24/arch/arm/mach-at91/board-sam9263ek.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-sam9263ek.c 2008-03-01 20:41:13.000000000 +0200
+@@ -27,6 +27,8 @@
+ #include <linux/spi/spi.h>
+ #include <linux/spi/ads7846.h>
+ #include <linux/fb.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
+
+ #include <video/atmel_lcdc.h>
+
+@@ -41,29 +43,24 @@
+
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+-#include <asm/arch/at91sam926x_mc.h>
++#include <asm/arch/at91_shdwc.h>
+
+ #include "generic.h"
+
+
+-/*
+- * Serial port configuration.
+- * 0 .. 2 = USART0 .. USART2
+- * 3 = DBGU
+- */
+-static struct at91_uart_config __initdata ek_uart_config = {
+- .console_tty = 0, /* ttyS0 */
+- .nr_tty = 2,
+- .tty_map = { 3, 0, -1, -1, } /* ttyS0, ..., ttyS3 */
+-};
+-
+ static void __init ek_map_io(void)
+ {
+ /* Initialize processor: 16.367 MHz crystal */
+ at91sam9263_initialize(16367660);
+
+- /* Setup the serial ports and console */
+- at91_init_serial(&ek_uart_config);
++ /* DGBU on ttyS0. (Rx & Tx only) */
++ at91_register_uart(0, 0, 0);
++
++ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
++ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
++
++ /* set serial console to ttyS0 (ie, DBGU) */
++ at91_set_serial_console(0);
+ }
+
+ static void __init ek_init_irq(void)
+@@ -163,6 +160,7 @@
+ * MACB Ethernet device
+ */
+ static struct at91_eth_data __initdata ek_macb_data = {
++ .phy_irq_pin = AT91_PIN_PE31,
+ .is_rmii = 1,
+ };
+
+@@ -242,14 +240,12 @@
+
+ static void at91_lcdc_power_control(int on)
+ {
+- if (on)
+- at91_set_gpio_value(AT91_PIN_PD12, 0); /* power up */
+- else
+- at91_set_gpio_value(AT91_PIN_PD12, 1); /* power down */
++ at91_set_gpio_value(AT91_PIN_PA30, on);
+ }
+
+ /* Driver datas */
+ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
++ .lcdcon_is_backlight = true,
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
+@@ -264,6 +260,55 @@
+
+
+ /*
++ * GPIO Buttons
++ */
++#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
++static struct gpio_keys_button ek_buttons[] = {
++ { /* BP1, "leftclic" */
++ .code = BTN_LEFT,
++ .gpio = AT91_PIN_PC5,
++ .active_low = 1,
++ .desc = "left_click",
++ .wakeup = 1,
++ },
++ { /* BP2, "rightclic" */
++ .code = BTN_RIGHT,
++ .gpio = AT91_PIN_PC4,
++ .active_low = 1,
++ .desc = "right_click",
++ .wakeup = 1,
++ },
++};
++
++static struct gpio_keys_platform_data ek_button_data = {
++ .buttons = ek_buttons,
++ .nbuttons = ARRAY_SIZE(ek_buttons),
++};
++
++static struct platform_device ek_button_device = {
++ .name = "gpio-keys",
++ .id = -1,
++ .num_resources = 0,
++ .dev = {
++ .platform_data = &ek_button_data,
++ }
++};
++
++static void __init ek_add_device_buttons(void)
++{
++ at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */
++ at91_set_deglitch(AT91_PIN_PC5, 1);
++ at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */
++ at91_set_deglitch(AT91_PIN_PC4, 1);
++
++ platform_device_register(&ek_button_device);
++}
++#else
++static void __init ek_add_device_buttons(void) {}
++#endif
++
++
++/*
+ * AC97
+ */
+ static struct atmel_ac97_data ek_ac97_data = {
+@@ -271,6 +316,30 @@
+ };
+
+
++/*
++ * LEDs ... these could all be PWM-driven, for variable brightness
++ */
++static struct gpio_led ek_leds[] = {
++ { /* "left" led, green, userled1, pwm1 */
++ .name = "ds1",
++ .gpio = AT91_PIN_PB8,
++ .active_low = 1,
++ .default_trigger = "mmc0",
++ },
++ { /* "right" led, green, userled2, pwm2 */
++ .name = "ds2",
++ .gpio = AT91_PIN_PC29,
++ .active_low = 1,
++ .default_trigger = "nand-disk",
++ },
++ { /* "power" led, yellow, pwm0 */
++ .name = "ds3",
++ .gpio = AT91_PIN_PB7,
++ .default_trigger = "heartbeat",
++ }
++};
++
++
+ static void __init ek_board_init(void)
+ {
+ /* Serial */
+@@ -294,8 +363,15 @@
+ at91_add_device_i2c(NULL, 0);
+ /* LCD Controller */
+ at91_add_device_lcdc(&ek_lcdc_data);
++ /* Push Buttons */
++ ek_add_device_buttons();
+ /* AC97 */
+ at91_add_device_ac97(&ek_ac97_data);
++ /* LEDs */
++ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
++ /* shutdown controller, wakeup button (5 msec low) */
++ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
++ | AT91_SHDW_RTTWKEN);
+ }
+
+ MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-sam9rlek.c linux-2.6/arch/arm/mach-at91/board-sam9rlek.c
+--- linux-2.6.24/arch/arm/mach-at91/board-sam9rlek.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-sam9rlek.c 2008-03-01 20:39:17.000000000 +0200
+@@ -29,29 +29,24 @@
+
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+-#include <asm/arch/at91sam926x_mc.h>
++#include <asm/arch/at91_shdwc.h>
+
+ #include "generic.h"
+
+
+-/*
+- * Serial port configuration.
+- * 0 .. 3 = USART0 .. USART3
+- * 4 = DBGU
+- */
+-static struct at91_uart_config __initdata ek_uart_config = {
+- .console_tty = 0, /* ttyS0 */
+- .nr_tty = 2,
+- .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+-};
+-
+ static void __init ek_map_io(void)
+ {
+ /* Initialize processor: 12.000 MHz crystal */
+ at91sam9rl_initialize(12000000);
+
+- /* Setup the serial ports and console */
+- at91_init_serial(&ek_uart_config);
++ /* DGBU on ttyS0. (Rx & Tx only) */
++ at91_register_uart(0, 0, 0);
++
++ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
++ at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
++
++ /* set serial console to ttyS0 (ie, DBGU) */
++ at91_set_serial_console(0);
+ }
+
+ static void __init ek_init_irq(void)
+@@ -190,6 +185,9 @@
+ at91_add_device_mmc(0, &ek_mmc_data);
+ /* LCD Controller */
+ at91_add_device_lcdc(&ek_lcdc_data);
++ /* shutdown controller, wakeup button (5 msec low) */
++ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
++ | AT91_SHDW_RTTWKEN);
+ }
+
+ MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/board-tms.c linux-2.6/arch/arm/mach-at91/board-tms.c
+--- linux-2.6.24/arch/arm/mach-at91/board-tms.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/board-tms.c 2007-12-31 15:18:42.000000000 +0200
+@@ -0,0 +1,198 @@
++/*
++* linux/arch/arm/mach-at91/board-tms.c
++*
++* Copyright (C) 2005 SAN People
++*
++* Adapted from board-dk to sweda TMS-100 by Luiz de Barros <lboneto@gmail.com>
++*
++* This program is free software; you can redistribute it and/or modify
++* it under the terms of the GNU General Public License as published by
++* the Free Software Foundation; either version 2 of the License, or
++* (at your option) any later version.
++*
++* This program is distributed in the hope that it will be useful,
++* but WITHOUT ANY WARRANTY; without even the implied warranty of
++* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++* GNU General Public License for more details.
++*
++* You should have received a copy of the GNU General Public License
++* along with this program; if not, write to the Free Software
++* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++*/
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/mtd/physmap.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/at91rm9200_mc.h>
++
++#include "generic.h"
++#include <linux/serial_8250.h>
++
++
++#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP| UPF_SHARE_IRQ)
++#define SERIAL_CLK (1843200)
++
++
++/*---------------------------------------------------------------------
++ * External UART
++ */
++
++#define PORT(_base, _irq) \
++ { \
++ .mapbase = _base, \
++ .irq = _irq, \
++ .uartclk = SERIAL_CLK, \
++ .iotype = UPIO_MEM, \
++ .regshift = 0, \
++ .flags = SERIAL_FLAGS, \
++ }
++
++static struct plat_serial8250_port tms_data[] = {
++ PORT(0x70000000, AT91_PIN_PC3),
++ PORT(0x80000000, AT91_PIN_PC5),
++ { },
++};
++
++static struct platform_device tms_device = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev =
++ {
++ .platform_data = &tms_data,
++ },
++};
++
++static void setup_external_uart(void)
++{
++ at91_sys_write(AT91_SMC_CSR(2),
++ AT91_SMC_ACSS_STD
++ | AT91_SMC_DBW_8
++ | AT91_SMC_BAT
++ | AT91_SMC_WSEN
++ | AT91_SMC_NWS_(32) /* wait states */
++ | AT91_SMC_RWSETUP_(6) /* setup time */
++ | AT91_SMC_RWHOLD_(4) /* hold time */
++
++ );
++ at91_sys_write(AT91_SMC_CSR(6),
++ AT91_SMC_ACSS_STD
++ | AT91_SMC_DBW_8
++ | AT91_SMC_BAT
++ | AT91_SMC_WSEN
++ | AT91_SMC_NWS_(32) /* wait states */
++ | AT91_SMC_RWSETUP_(6) /* setup time */
++ | AT91_SMC_RWHOLD_(4) /* hold time */
++
++ );
++ at91_sys_write(AT91_SMC_CSR(7),
++ AT91_SMC_ACSS_STD
++ | AT91_SMC_DBW_8
++ | AT91_SMC_BAT
++ | AT91_SMC_WSEN
++ | AT91_SMC_NWS_(32) /* wait states */
++ | AT91_SMC_RWSETUP_(6) /* setup time */
++ | AT91_SMC_RWHOLD_(4) /* hold time */
++ );
++
++ platform_device_register(&tms_device);
++}
++
++
++/*
++ * Serial port configuration.
++ * 0 .. 3 = USART0 .. USART3
++ * 4 = DBGU
++ */
++static struct at91_uart_config __initdata tms_uart_config = {
++ .console_tty = 0, /* ttyS0 */
++ .nr_tty = 5,
++ .tty_map = { 4, 0, 1, 2, 3 } /* ttyS0, ..., ttyS4 */
++};
++
++static void __init tms_map_io(void)
++{
++ /* Initialize processor: 18.432 MHz crystal */
++ at91rm9200_initialize(18432000, AT91RM9200_BGA);
++
++ /* Setup the LEDs */
++ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
++
++ /* Setup the serial ports and console */
++ at91_init_serial(&tms_uart_config);
++}
++
++static void __init tms_init_irq(void)
++{
++ at91rm9200_init_interrupts(NULL);
++}
++
++
++static struct at91_eth_data __initdata tms_eth_data = {
++ .phy_irq_pin = AT91_PIN_PC4,
++ .is_rmii = 1,
++};
++
++static struct at91_usbh_data __initdata tms_usbh_data = {
++ .ports = 2,
++};
++
++static struct spi_board_info tms_spi_devices[] = {
++ { /* DataFlash chip */
++ .modalias = "mtd_dataflash",
++ .chip_select = 0,
++ .max_speed_hz = 15 * 1000 * 1000,
++ },
++ { /* DataFlash chip */
++ .modalias = "mtd_dataflash",
++ .chip_select = 1,
++ .max_speed_hz = 15 * 1000 * 1000,
++ }
++};
++
++static struct i2c_board_info __initdata tms_i2c_devices[] = {
++ {
++ I2C_BOARD_INFO("isl1208", 0x6f),
++ }
++};
++
++static void __init tms_board_init(void)
++{
++ /* Serial */
++ at91_add_device_serial();
++ /* Ethernet */
++ at91_add_device_eth(&tms_eth_data);
++ at91_add_device_usbh(&tms_usbh_data);
++ /* I2C */
++ at91_add_device_i2c(tms_i2c_devices, ARRAY_SIZE(tms_i2c_devices));
++ /* SPI */
++ at91_add_device_spi(tms_spi_devices, ARRAY_SIZE(tms_spi_devices));
++ /* Two port external UART */
++ setup_external_uart();
++}
++
++MACHINE_START(SWEDATMS, "Sweda TMS-100 Board")
++ /* Maintainer: Luiz de Barros */
++ .phys_io = AT91_BASE_SYS,
++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
++ .boot_params = AT91_SDRAM_BASE + 0x100,
++ .timer = &at91rm9200_timer,
++ .map_io = tms_map_io,
++ .init_irq = tms_init_irq,
++ .init_machine = tms_board_init,
++MACHINE_END
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach-at91/clock.c
+--- linux-2.6.24/arch/arm/mach-at91/clock.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/clock.c 2008-02-18 18:34:06.000000000 +0200
+@@ -32,6 +32,7 @@
+ #include <asm/arch/cpu.h>
+
+ #include "clock.h"
++#include "generic.h"
+
+
+ /*
+@@ -254,6 +255,23 @@
+
+ /*------------------------------------------------------------------------*/
+
++#ifdef CONFIG_PM
++
++int clk_must_disable(struct clk *clk)
++{
++ if (!at91_suspend_entering_slow_clock())
++ return 0;
++
++ while (clk->parent)
++ clk = clk->parent;
++ return clk != &clk32k;
++}
++EXPORT_SYMBOL(clk_must_disable);
++
++#endif
++
++/*------------------------------------------------------------------------*/
++
+ #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+
+ /*
+@@ -343,7 +361,7 @@
+ EXPORT_SYMBOL(clk_set_parent);
+
+ /* establish PCK0..PCK3 parentage and rate */
+-static void init_programmable_clock(struct clk *clk)
++static void __init init_programmable_clock(struct clk *clk)
+ {
+ struct clk *parent;
+ u32 pckr;
+@@ -574,6 +592,8 @@
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ udpck.pmc_mask = AT91SAM926x_PMC_UDP;
++ } else if (cpu_is_at91cap9()) {
++ uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+ }
+ at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/generic.h linux-2.6/arch/arm/mach-at91/generic.h
+--- linux-2.6.24/arch/arm/mach-at91/generic.h 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/generic.h 2008-02-18 23:29:29.000000000 +0200
+@@ -15,6 +15,7 @@
+ extern void __init at91sam9263_initialize(unsigned long main_clock);
+ extern void __init at91sam9rl_initialize(unsigned long main_clock);
+ extern void __init at91x40_initialize(unsigned long main_clock);
++extern void __init at91cap9_initialize(unsigned long main_clock);
+
+ /* Interrupts */
+ extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
+@@ -23,6 +24,7 @@
+ extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
+ extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
+ extern void __init at91x40_init_interrupts(unsigned int priority[]);
++extern void __init at91cap9_init_interrupts(unsigned int priority[]);
+ extern void __init at91_aic_init(unsigned int priority[]);
+
+ /* Timer */
+@@ -39,12 +41,16 @@
+ /* Power Management */
+ extern void at91_irq_suspend(void);
+ extern void at91_irq_resume(void);
++extern int at91_suspend_entering_slow_clock(void);
+
+ /* GPIO */
+ #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
+ #define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
+
+ struct at91_gpio_bank {
++ unsigned chipbase; /* bank's first GPIO number */
++ void __iomem *regbase; /* base of register bank */
++ struct at91_gpio_bank *next; /* bank sharing same IRQ/clock/... */
+ unsigned short id; /* peripheral ID */
+ unsigned long offset; /* offset from system peripheral base */
+ struct clk *clock; /* associated clock */
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/gpio.c linux-2.6/arch/arm/mach-at91/gpio.c
+--- linux-2.6.24/arch/arm/mach-at91/gpio.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/gpio.c 2008-03-01 18:01:29.000000000 +0200
+@@ -13,6 +13,8 @@
+ #include <linux/errno.h>
+ #include <linux/interrupt.h>
+ #include <linux/irq.h>
++#include <linux/debugfs.h>
++#include <linux/seq_file.h>
+ #include <linux/kernel.h>
+ #include <linux/list.h>
+ #include <linux/module.h>
+@@ -31,12 +33,10 @@
+
+ static inline void __iomem *pin_to_controller(unsigned pin)
+ {
+- void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
+-
+ pin -= PIN_BASE;
+ pin /= 32;
+ if (likely(pin < gpio_banks))
+- return sys_base + gpio[pin].offset;
++ return gpio[pin].regbase;
+
+ return NULL;
+ }
+@@ -292,11 +292,11 @@
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+- u32 pio = gpio[i].offset;
++ void __iomem *pio = gpio[i].regbase;
+
+- backups[i] = at91_sys_read(pio + PIO_IMR);
+- at91_sys_write(pio + PIO_IDR, backups[i]);
+- at91_sys_write(pio + PIO_IER, wakeups[i]);
++ backups[i] = __raw_readl(pio + PIO_IMR);
++ __raw_writel(backups[i], pio + PIO_IDR);
++ __raw_writel(wakeups[i], pio + PIO_IER);
+
+ if (!wakeups[i])
+ clk_disable(gpio[i].clock);
+@@ -313,13 +313,13 @@
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+- u32 pio = gpio[i].offset;
++ void __iomem *pio = gpio[i].regbase;
+
+ if (!wakeups[i])
+ clk_enable(gpio[i].clock);
+
+- at91_sys_write(pio + PIO_IDR, wakeups[i]);
+- at91_sys_write(pio + PIO_IER, backups[i]);
++ __raw_writel(wakeups[i], pio + PIO_IDR);
++ __raw_writel(backups[i], pio + PIO_IER);
+ }
+ }
+
+@@ -359,7 +359,13 @@
+
+ static int gpio_irq_type(unsigned pin, unsigned type)
+ {
+- return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
++ switch (type) {
++ case IRQ_TYPE_NONE:
++ case IRQ_TYPE_EDGE_BOTH:
++ return 0;
++ default:
++ return -EINVAL;
++ }
+ }
+
+ static struct irq_chip gpio_irqchip = {
+@@ -374,20 +380,30 @@
+ {
+ unsigned pin;
+ struct irq_desc *gpio;
++ struct at91_gpio_bank *bank;
+ void __iomem *pio;
+ u32 isr;
+
+- pio = get_irq_chip_data(irq);
++ bank = get_irq_chip_data(irq);
++ pio = bank->regbase;
+
+ /* temporarily mask (level sensitive) parent IRQ */
+ desc->chip->ack(irq);
+ for (;;) {
+- /* reading ISR acks the pending (edge triggered) GPIO interrupt */
++ /* Reading ISR acks pending (edge triggered) GPIO interrupts.
++ * When there none are pending, we're finished unless we need
++ * to process multiple banks (like ID_PIOCDE on sam9263).
++ */
+ isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
+- if (!isr)
+- break;
++ if (!isr) {
++ if (!bank->next)
++ break;
++ bank = bank->next;
++ pio = bank->regbase;
++ continue;
++ }
+
+- pin = (unsigned) get_irq_data(irq);
++ pin = bank->chipbase;
+ gpio = &irq_desc[pin];
+
+ while (isr) {
+@@ -414,29 +430,94 @@
+
+ /*--------------------------------------------------------------------------*/
+
++#ifdef CONFIG_DEBUG_FS
++
++static int at91_gpio_show(struct seq_file *s, void *unused)
++{
++ int bank, j;
++
++ /* print heading */
++ seq_printf(s, "Pin\t");
++ for (bank = 0; bank < gpio_banks; bank++) {
++ seq_printf(s, "PIO%c\t", 'A' + bank);
++ };
++ seq_printf(s, "\n\n");
++
++ /* print pin status */
++ for (j = 0; j < 32; j++) {
++ seq_printf(s, "%i:\t", j);
++
++ for (bank = 0; bank < gpio_banks; bank++) {
++ unsigned pin = PIN_BASE + (32 * bank) + j;
++ void __iomem *pio = pin_to_controller(pin);
++ unsigned mask = pin_to_mask(pin);
++
++ if (__raw_readl(pio + PIO_PSR) & mask)
++ seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
++ else
++ seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A");
++
++ seq_printf(s, "\t");
++ }
++
++ seq_printf(s, "\n");
++ }
++
++ return 0;
++}
++
++static int at91_gpio_open(struct inode *inode, struct file *file)
++{
++ return single_open(file, at91_gpio_show, NULL);
++}
++
++static const struct file_operations at91_gpio_operations = {
++ .open = at91_gpio_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = single_release,
++};
++
++static int __init at91_gpio_debugfs_init(void)
++{
++ /* /sys/kernel/debug/at91_gpio */
++ (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations);
++ return 0;
++}
++postcore_initcall(at91_gpio_debugfs_init);
++
++#endif
++
++/*--------------------------------------------------------------------------*/
++
++/*
++ * This lock class tells lockdep that GPIO irqs are in a different
++ * category than their parents, so it won't report false recursion.
++ */
++static struct lock_class_key gpio_lock_class;
++
+ /*
+ * Called from the processor-specific init to enable GPIO interrupt support.
+ */
+ void __init at91_gpio_irq_setup(void)
+ {
+- unsigned pioc, pin;
++ unsigned pioc, pin;
++ struct at91_gpio_bank *this, *prev;
+
+- for (pioc = 0, pin = PIN_BASE;
+- pioc < gpio_banks;
+- pioc++) {
+- void __iomem *controller;
+- unsigned id = gpio[pioc].id;
++ for (pioc = 0, pin = PIN_BASE, this = gpio, prev = NULL;
++ pioc++ < gpio_banks;
++ prev = this, this++) {
++ unsigned id = this->id;
+ unsigned i;
+
+- clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */
++ /* enable PIO controller's clock */
++ clk_enable(this->clock);
+
+- controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
+- __raw_writel(~0, controller + PIO_IDR);
++ __raw_writel(~0, this->regbase + PIO_IDR);
+
+- set_irq_data(id, (void *) pin);
+- set_irq_chip_data(id, controller);
++ for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
++ lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class);
+
+- for (i = 0; i < 32; i++, pin++) {
+ /*
+ * Can use the "simple" and not "edge" handler since it's
+ * shorter, and the AIC handles interrupts sanely.
+@@ -446,6 +527,14 @@
+ set_irq_flags(pin, IRQF_VALID);
+ }
+
++ /* The toplevel handler handles one bank of GPIOs, except
++ * AT91SAM9263_ID_PIOCDE handles three... PIOC is first in
++ * the list, so we only set up that handler.
++ */
++ if (prev && prev->next == this)
++ continue;
++
++ set_irq_chip_data(id, this);
+ set_irq_chained_handler(id, gpio_irq_handler);
+ }
+ pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
+@@ -456,8 +545,21 @@
+ */
+ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
+ {
++ unsigned i;
++ struct at91_gpio_bank *last;
++
+ BUG_ON(nr_banks > MAX_GPIO_BANKS);
+
+ gpio = data;
+ gpio_banks = nr_banks;
++
++ for (i = 0, last = NULL; i < nr_banks; i++, last = data, data++) {
++ data->chipbase = PIN_BASE + i * 32;
++ data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
++
++ /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
++ /* AT91CAP9_ID_PIOABCD groups PIOA, PIOB, PIOC, PIOD */
++ if (last && last->id == data->id)
++ last->next = data;
++ }
+ }
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/ics1523.c linux-2.6/arch/arm/mach-at91/ics1523.c
+--- linux-2.6.24/arch/arm/mach-at91/ics1523.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/ics1523.c 2008-03-01 22:05:07.000000000 +0200
+@@ -0,0 +1,208 @@
++/*
++ * arch/arm/mach-at91rm9200/ics1523.c
++ *
++ * Copyright (C) 2003 ATMEL Rousset
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++
++#include <asm/arch/ics1523.h>
++#include <asm/arch/at91_twi.h>
++#include <asm/arch/gpio.h>
++
++/* TWI Errors */
++#define AT91_TWI_ERROR (AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
++
++
++static void __iomem *twi_base;
++
++#define at91_twi_read(reg) __raw_readl(twi_base + (reg))
++#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg))
++
++
++/* -----------------------------------------------------------------------------
++ * Initialization of TWI CLOCK
++ * ----------------------------------------------------------------------------- */
++
++static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
++{
++ int sclock;
++
++ /* Here, CKDIV = 1 and CHDIV = CLDIV ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
++ sclock = (10*mck_khz / ICS_TRANSFER_RATE);
++ if (sclock % 10 >= 5)
++ sclock = (sclock /10) - 5;
++ else
++ sclock = (sclock /10)- 6;
++ sclock = (sclock + (4 - sclock %4)) >> 2; /* div 4 */
++
++ at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
++}
++
++/* -----------------------------------------------------------------------------
++ * Read a byte with TWI Interface from the Clock Generator ICS1523
++ * ----------------------------------------------------------------------------- */
++
++static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
++{
++ int Status, nb_trial;
++
++ at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
++ at91_twi_write(AT91_TWI_IADR, reg_address);
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++ /* Program temporizing period (300us) */
++ udelay(300);
++
++ /* Wait TXcomplete ... */
++ nb_trial = 0;
++ Status = at91_twi_read(AT91_TWI_SR);
++ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
++ nb_trial++;
++ Status = at91_twi_read(AT91_TWI_SR);
++ }
++
++ if (Status & AT91_TWI_TXCOMP) {
++ *data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
++ return ICS1523_ACCESS_OK;
++ }
++ else
++ return ICS1523_ACCESS_ERROR;
++}
++
++/* -----------------------------------------------------------------------------
++ * Write a byte with TWI Interface to the Clock Generator ICS1523
++ * ----------------------------------------------------------------------------- */
++
++static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
++{
++ int Status, nb_trial;
++
++ at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
++ at91_twi_write(AT91_TWI_IADR, reg_address);
++ at91_twi_write(AT91_TWI_THR, data_out);
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++ /* Program temporizing period (300us) */
++ udelay(300);
++
++ nb_trial = 0;
++ Status = at91_twi_read(AT91_TWI_SR);
++ while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
++ nb_trial++;
++ if (Status & AT91_TWI_ERROR) {
++ /* If Underrun OR NACK - Start again */
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
++
++ /* Program temporizing period (300us) */
++ udelay(300);
++ }
++ Status = at91_twi_read(AT91_TWI_SR);
++ };
++
++ if (Status & AT91_TWI_TXCOMP)
++ return ICS1523_ACCESS_OK;
++ else
++ return ICS1523_ACCESS_ERROR;
++}
++
++/* -----------------------------------------------------------------------------
++ * Initialization of the Clock Generator ICS1523
++ * ----------------------------------------------------------------------------- */
++
++int at91_ics1523_init(void)
++{
++ int nb_trial;
++ int ack = ICS1523_ACCESS_OK;
++ unsigned int status = 0xffffffff;
++ struct clk *twi_clk;
++
++ /* Map in TWI peripheral */
++ twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
++ if (!twi_base)
++ return -ENOMEM;
++
++ /* pins used for TWI interface */
++ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
++ at91_set_multi_drive(AT91_PIN_PA25, 1);
++ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
++ at91_set_multi_drive(AT91_PIN_PA26, 1);
++
++ /* Enable the TWI clock */
++ twi_clk = clk_get(NULL, "twi_clk");
++ if (IS_ERR(twi_clk))
++ return ICS1523_ACCESS_ERROR;
++ clk_enable(twi_clk);
++
++ /* Disable interrupts */
++ at91_twi_write(AT91_TWI_IDR, -1);
++
++ /* Reset peripheral */
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
++
++ /* Set Master mode */
++ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
++
++ /* Set TWI Clock Waveform Generator Register */
++ at91_ics1523_SetTwiClock(60000); /* MCK in KHz = 60000 KHz */
++
++ /* ICS1523 Initialisation */
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
++
++ nb_trial = 0;
++ do {
++ nb_trial++;
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
++
++ /* Program 1ms temporizing period */
++ mdelay(1);
++
++ at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
++ } while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
++
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
++
++ /* Program 1ms temporizing period */
++ mdelay(1);
++
++ ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
++
++ /* Program 1ms temporizing period */
++ mdelay(1);
++
++ /* All done - cleanup */
++ iounmap(twi_base);
++ clk_disable(twi_clk);
++ clk_put(twi_clk);
++
++ return ack;
++}
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/leds.c linux-2.6/arch/arm/mach-at91/leds.c
+--- linux-2.6.24/arch/arm/mach-at91/leds.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/leds.c 2008-02-18 22:20:11.000000000 +0200
+@@ -14,11 +14,63 @@
+ #include <linux/init.h>
+
+ #include <asm/mach-types.h>
+-#include <asm/leds.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
+
+
++/* ------------------------------------------------------------------------- */
++
++#if defined(CONFIG_NEW_LEDS)
++
++#include <linux/platform_device.h>
++
++/*
++ * New cross-platform LED support.
++ */
++
++static struct gpio_led_platform_data led_data;
++
++static struct platform_device at91_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev.platform_data = &led_data,
++};
++
++void __init at91_gpio_leds(struct gpio_led *leds, int nr)
++{
++ int i;
++
++ if (!nr)
++ return;
++
++ for (i = 0; i < nr; i++)
++ at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
++
++ led_data.leds = leds;
++ led_data.num_leds = nr;
++ platform_device_register(&at91_leds);
++}
++
++#else
++void __init at91_gpio_leds(struct gpio_led *leds, int nr) {}
++#endif
++
++
++/* ------------------------------------------------------------------------- */
++
++#if defined(CONFIG_LEDS)
++
++#include <asm/leds.h>
++
++/*
++ * Old ARM-specific LED framework; not fully functional when generic time is
++ * in use.
++ */
++
++static u8 at91_leds_cpu;
++static u8 at91_leds_timer;
++
++
+ static inline void at91_led_on(unsigned int led)
+ {
+ at91_set_gpio_value(led, 0);
+@@ -93,3 +145,18 @@
+ }
+
+ __initcall(leds_init);
++
++
++void __init at91_init_leds(u8 cpu_led, u8 timer_led)
++{
++ /* Enable GPIO to access the LEDs */
++ at91_set_gpio_output(cpu_led, 1);
++ at91_set_gpio_output(timer_led, 1);
++
++ at91_leds_cpu = cpu_led;
++ at91_leds_timer = timer_led;
++}
++
++#else
++void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
++#endif
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at91/pm.c
+--- linux-2.6.24/arch/arm/mach-at91/pm.c 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/pm.c 2008-03-01 22:05:23.000000000 +0200
+@@ -26,12 +26,140 @@
+ #include <asm/mach-types.h>
+
+ #include <asm/arch/at91_pmc.h>
+-#include <asm/arch/at91rm9200_mc.h>
+ #include <asm/arch/gpio.h>
+ #include <asm/arch/cpu.h>
+
+ #include "generic.h"
+
++#ifdef CONFIG_ARCH_AT91RM9200
++#include <asm/arch/at91rm9200_mc.h>
++
++/*
++ * The AT91RM9200 goes into self-refresh mode with this command, and will
++ * terminate self-refresh automatically on the next SDRAM access.
++ */
++#define sdram_selfrefresh_enable() at91_sys_write(AT91_SDRAMC_SRR, 1)
++#define sdram_selfrefresh_disable() do {} while (0)
++
++#elif defined(CONFIG_ARCH_AT91CAP9)
++#include <asm/arch/at91cap9_ddrsdr.h>
++
++static u32 saved_lpr;
++
++static inline void sdram_selfrefresh_enable(void)
++{
++ u32 lpr;
++
++ saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
++
++ lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
++ at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
++}
++
++#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
++
++#else
++#include <asm/arch/at91sam926x_sdramc.h>
++
++static u32 saved_lpr;
++
++static inline void sdram_selfrefresh_enable(void)
++{
++ u32 lpr;
++
++ saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
++
++ lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
++ at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
++}
++
++#define sdram_selfrefresh_disable() at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
++
++/*
++ * FIXME: The AT91SAM9263 has a second EBI controller which may have
++ * additional SDRAM. pm_slowclock.S will require a similar fix.
++ */
++
++#endif
++
++
++#if defined(AT91_SHDWC)
++
++#include <asm/arch/at91_rstc.h>
++#include <asm/arch/at91_shdwc.h>
++
++/*
++ * Show the reason for the previous system reset.
++ */
++static void __init show_reset_status(void)
++{
++ static char reset[] __initdata = "reset";
++
++ static char general[] __initdata = "general";
++ static char wakeup[] __initdata = "wakeup";
++ static char watchdog[] __initdata = "watchdog";
++ static char software[] __initdata = "software";
++ static char user[] __initdata = "user";
++ static char unknown[] __initdata = "unknown";
++
++ static char signal[] __initdata = "signal";
++ static char rtc[] __initdata = "rtc";
++ static char rtt[] __initdata = "rtt";
++ static char restore[] __initdata = "power-restored";
++
++ char *reason, *r2 = reset;
++ u32 reset_type, wake_type;
++
++ reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
++ wake_type = at91_sys_read(AT91_SHDW_SR);
++
++ switch (reset_type) {
++ case AT91_RSTC_RSTTYP_GENERAL:
++ reason = general;
++ break;
++ case AT91_RSTC_RSTTYP_WAKEUP:
++ /* board-specific code enabled the wakeup sources */
++ reason = wakeup;
++
++ /* "wakeup signal" */
++ if (wake_type & AT91_SHDW_WAKEUP0)
++ r2 = signal;
++ else {
++ r2 = reason;
++ if (wake_type & AT91_SHDW_RTTWK) /* rtt wakeup */
++ reason = rtt;
++ else if (wake_type & AT91_SHDW_RTCWK) /* rtc wakeup */
++ reason = rtc;
++ else if (wake_type == 0) /* power-restored wakeup */
++ reason = restore;
++ else /* unknown wakeup */
++ reason = unknown;
++ }
++ break;
++ case AT91_RSTC_RSTTYP_WATCHDOG:
++ reason = watchdog;
++ break;
++ case AT91_RSTC_RSTTYP_SOFTWARE:
++ reason = software;
++ break;
++ case AT91_RSTC_RSTTYP_USER:
++ reason = user;
++ break;
++ default:
++ reason = unknown;
++ break;
++ }
++ pr_info("AT91: Starting after %s %s\n", reason, r2);
++}
++#else
++static void __init show_reset_status(void) {}
++#endif
++
++#ifdef CONFIG_AT91_SLOW_CLOCK
++extern void at91_slow_clock(void);
++extern u32 at91_slow_clock_sz;
++#endif
++
+
+ static int at91_pm_valid_state(suspend_state_t state)
+ {
+@@ -62,6 +190,7 @@
+ * Verify that all the clocks are correct before entering
+ * slow-clock mode.
+ */
++#warning "This should probably be moved to clocks.c"
+ static int at91_pm_verify_clocks(void)
+ {
+ unsigned long scsr;
+@@ -80,6 +209,11 @@
+ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+ return 0;
+ }
++ } else if (cpu_is_at91cap9()) {
++ if ((scsr & AT91CAP9_PMC_UHP) != 0) {
++ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
++ return 0;
++ }
+ }
+
+ #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+@@ -102,20 +236,15 @@
+ }
+
+ /*
+- * Call this from platform driver suspend() to see how deeply to suspend.
++ * This is called from clk_must_disable(), to see how deeply to suspend.
+ * For example, some controllers (like OHCI) need one of the PLL clocks
+ * in order to act as a wakeup source, and those are not available when
+ * going into slow clock mode.
+- *
+- * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
+- * the very same problem (but not using at91 main_clk), and it'd be better
+- * to add one generic API rather than lots of platform-specific ones.
+ */
+ int at91_suspend_entering_slow_clock(void)
+ {
+ return (target_state == PM_SUSPEND_MEM);
+ }
+-EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
+
+
+ static void (*slow_clock)(void);
+@@ -153,11 +282,12 @@
+ * turning off the main oscillator; reverse on wakeup.
+ */
+ if (slow_clock) {
++ /* copy slow_clock handler to SRAM, and call it */
++ memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
+ slow_clock();
+ break;
+ } else {
+- /* DEVELOPMENT ONLY */
+- pr_info("AT91: PM - no slow clock mode yet ...\n");
++ pr_info("AT91: PM - no slow clock mode enabled ...\n");
+ /* FALLTHROUGH leaving master clock alone */
+ }
+
+@@ -170,13 +300,15 @@
+ case PM_SUSPEND_STANDBY:
+ /*
+ * NOTE: the Wait-for-Interrupt instruction needs to be
+- * in icache so the SDRAM stays in self-refresh mode until
+- * the wakeup IRQ occurs.
++ * in icache so no SDRAM accesses are needed until the
++ * wakeup IRQ occurs and self-refresh is terminated.
+ */
+ asm("b 1f; .align 5; 1:");
+ asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
+- at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */
+- /* fall though to next state */
++ sdram_selfrefresh_enable();
++ asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
++ sdram_selfrefresh_disable();
++ break;
+
+ case PM_SUSPEND_ON:
+ asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
+@@ -191,6 +323,7 @@
+ at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
+
+ error:
++ sdram_selfrefresh_disable();
+ target_state = PM_SUSPEND_ON;
+ at91_irq_resume();
+ at91_gpio_resume();
+@@ -204,23 +337,24 @@
+ .enter = at91_pm_enter,
+ };
+
++
+ static int __init at91_pm_init(void)
+ {
+- printk("AT91: Power Management\n");
+-
+-#ifdef CONFIG_AT91_PM_SLOW_CLOCK
+- /* REVISIT allocations of SRAM should be dynamically managed.
+- * FIQ handlers and other components will want SRAM/TCM too...
+- */
+- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
+- memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
++#ifdef CONFIG_AT91_SLOW_CLOCK
++ slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz);
++ pr_info("AT91: Power Management (with slow clock mode)\n");
++#else
++ pr_info("AT91: Power Management\n");
+ #endif
+
+- /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
++#ifdef CONFIG_ARCH_AT91RM9200
++ /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
+ at91_sys_write(AT91_SDRAMC_LPR, 0);
++#endif
+
+ suspend_set_ops(&at91_pm_ops);
+
++ show_reset_status();
+ return 0;
+ }
+ arch_initcall(at91_pm_init);
+diff -urN -x CVS linux-2.6.24/arch/arm/mach-at91/pm_slowclock.S linux-2.6/arch/arm/mach-at91/pm_slowclock.S
+--- linux-2.6.24/arch/arm/mach-at91/pm_slowclock.S 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/arch/arm/mach-at91/pm_slowclock.S 2008-03-01 21:38:50.000000000 +0200
+@@ -0,0 +1,273 @@
++/*
++ * arch/arm/mach-at91/pm_slow_clock.S
++ *
++ * Copyright (C) 2006 Savin Zlobec
++ *
++ * AT91SAM9 support:
++ * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/linkage.h>
++#include <asm/hardware.h>
++#include <asm/arch/at91_pmc.h>
++
++#ifdef CONFIG_ARCH_AT91RM9200
++#include <asm/arch/at91rm9200_mc.h>
++#elif defined(CONFIG_ARCH_AT91CAP9)
++#include <asm/arch/at91cap9_ddrsdr.h>
++#else
++#include <asm/arch/at91sam926x_sdramc.h>
++#endif
++
++/*
++ * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
++ * clock during suspend by adjusting its prescalar and divisor.
++ * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
++ * are errata regarding adjusting the prescalar and divisor.
++ */
++#undef SLOWDOWN_MASTER_CLOCK
++
++#define MCKRDY_TIMEOUT 1000
++#define MOSCRDY_TIMEOUT 1000
++#define PLLALOCK_TIMEOUT 1000
++#define PLLBLOCK_TIMEOUT 1000
++
++
++/*
++ * Wait until master clock is ready (after switching master clock source)
++ */
++ .macro wait_mckrdy
++ mov r4, #MCKRDY_TIMEOUT
++1: sub r4, r4, #1
++ cmp r4, #0
++ beq 2f
++ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
++ tst r3, #AT91_PMC_MCKRDY
++ beq 1b
++2:
++ .endm
++
++/*
++ * Wait until master oscillator has stabilized.
++ */
++ .macro wait_moscrdy
++ mov r4, #MOSCRDY_TIMEOUT
++1: sub r4, r4, #1
++ cmp r4, #0
++ beq 2f
++ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
++ tst r3, #AT91_PMC_MOSCS
++ beq 1b
++2:
++ .endm
++
++/*
++ * Wait until PLLA has locked.
++ */
++ .macro wait_pllalock
++ mov r4, #PLLALOCK_TIMEOUT
++1: sub r4, r4, #1
++ cmp r4, #0
++ beq 2f
++ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
++ tst r3, #AT91_PMC_LOCKA
++ beq 1b
++2:
++ .endm
++
++/*
++ * Wait until PLLB has locked.
++ */
++ .macro wait_pllblock
++ mov r4, #PLLBLOCK_TIMEOUT
++1: sub r4, r4, #1
++ cmp r4, #0
++ beq 2f
++ ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
++ tst r3, #AT91_PMC_LOCKB
++ beq 1b
++2:
++ .endm
++
++ .text
++
++ENTRY(at91_slow_clock)
++ /* Save registers on stack */
++ stmfd sp!, {r0 - r12, lr}
++
++ /*
++ * Register usage:
++ * R1 = Base address of AT91_PMC
++ * R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
++ * R3 = temporary register
++ * R4 = temporary register
++ */
++ ldr r1, .at91_va_base_pmc
++ ldr r2, .at91_va_base_sdramc
++
++ /* Drain write buffer */
++ mcr p15, 0, r0, c7, c10, 4
++
++#ifdef CONFIG_ARCH_AT91RM9200
++ /* Put SDRAM in self-refresh mode */
++ mov r3, #1
++ str r3, [r2, #AT91_SDRAMC_SRR]
++#elif defined(CONFIG_ARCH_AT91CAP9)
++ /* Enable SDRAM self-refresh mode */
++ ldr r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
++ str r3, .saved_sam9_lpr
++
++ mov r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
++ str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
++#else
++ /* Enable SDRAM self-refresh mode */
++ ldr r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
++ str r3, .saved_sam9_lpr
++
++ mov r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
++ str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
++#endif
++
++ /* Save Master clock setting */
++ ldr r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
++ str r3, .saved_mckr
++
++ /*
++ * Set the Master clock source to slow clock
++ */
++ bic r3, r3, #AT91_PMC_CSS
++ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
++
++ wait_mckrdy
++
++#ifdef SLOWDOWN_MASTER_CLOCK
++ /*
++ * Set the Master Clock PRES and MDIV fields.
++ *
++ * See AT91RM9200 errata #27 and #28 for details.
++ */
++ mov r3, #0
++ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
++
++ wait_mckrdy
++#endif
++
++ /* Save PLLA setting and disable it */
++ ldr r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
++ str r3, .saved_pllar
++
++ mov r3, #AT91_PMC_PLLCOUNT
++ orr r3, r3, #(1 << 29) /* bit 29 always set */
++ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
++
++ wait_pllalock
++
++ /* Save PLLB setting and disable it */
++ ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
++ str r3, .saved_pllbr
++
++ mov r3, #AT91_PMC_PLLCOUNT
++ str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
++
++ wait_pllblock
++
++ /* Turn off the main oscillator */
++ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
++ bic r3, r3, #AT91_PMC_MOSCEN
++ str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
++
++ /* Wait for interrupt */
++ mcr p15, 0, r0, c7, c0, 4
++
++ /* Turn on the main oscillator */
++ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
++ orr r3, r3, #AT91_PMC_MOSCEN
++ str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
++
++ wait_moscrdy
++
++ /* Restore PLLB setting */
++ ldr r3, .saved_pllbr
++ str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
++
++ wait_pllblock
++
++ /* Restore PLLA setting */
++ ldr r3, .saved_pllar
++ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
++
++ wait_pllalock
++
++#ifdef SLOWDOWN_MASTER_CLOCK
++ /*
++ * First set PRES if it was not 0,
++ * than set CSS and MDIV fields.
++ *
++ * See AT91RM9200 errata #27 and #28 for details.
++ */
++ ldr r3, .saved_mckr
++ tst r3, #AT91_PMC_PRES
++ beq 2f
++ and r3, r3, #AT91_PMC_PRES
++ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
++
++ wait_mckrdy
++#endif
++
++ /*
++ * Restore master clock setting
++ */
++2: ldr r3, .saved_mckr
++ str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
++
++ wait_mckrdy
++
++#ifdef CONFIG_ARCH_AT91RM9200
++ /* Do nothing - self-refresh is automatically disabled. */
++#elif defined(CONFIG_ARCH_AT91CAP9)
++ /* Restore LPR on AT91CAP9 */
++ ldr r3, .saved_sam9_lpr
++ str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
++#else
++ /* Restore LPR on AT91SAM9 */
++ ldr r3, .saved_sam9_lpr
++ str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
++#endif
++
++ /* Restore registers, and return */
++ ldmfd sp!, {r0 - r12, pc}
++
++
++.saved_mckr:
++ .word 0
++
++.saved_pllar:
++ .word 0
++
++.saved_pllbr:
++ .word 0
++
++.saved_sam9_lpr:
++ .word 0
++
++.at91_va_base_pmc:
++ .word AT91_VA_BASE_SYS + AT91_PMC
++
++#ifdef CONFIG_ARCH_AT91RM9200
++.at91_va_base_sdramc:
++ .word AT91_VA_BASE_SYS
++#elif defined(CONFIG_ARCH_AT91CAP9)
++.at91_va_base_sdramc:
++ .word AT91_VA_BASE_SYS + AT91_DDRSDRC
++#else
++.at91_va_base_sdramc:
++ .word AT91_VA_BASE_SYS + AT91_SDRAMC
++#endif
++
++ENTRY(at91_slow_clock_sz)
++ .word .-at91_slow_clock
+diff -urN -x CVS linux-2.6.24/arch/arm/mm/Kconfig linux-2.6/arch/arm/mm/Kconfig
+--- linux-2.6.24/arch/arm/mm/Kconfig 2008-03-01 22:02:07.000000000 +0200
++++ linux-2.6/arch/arm/mm/Kconfig 2008-01-16 20:26:55.000000000 +0200
+@@ -171,8 +171,8 @@
+ # ARM926T
+ config CPU_ARM926T
+ bool "Support ARM926T processor"
+- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
+- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
++ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
++ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
+ select CPU_32v5
+ select CPU_ABRT_EV5TJ
+ select CPU_CACHE_VIVT
+diff -urN -x CVS linux-2.6.24/arch/arm/tools/mach-types linux-2.6/arch/arm/tools/mach-types
+--- linux-2.6.24/arch/arm/tools/mach-types 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/arch/arm/tools/mach-types 2008-01-16 21:25:12.000000000 +0200
+@@ -12,7 +12,7 @@
+ #
+ # http://www.arm.linux.org.uk/developer/machines/?action=new
+ #
+-# Last update: Fri May 11 19:53:41 2007
++# Last update: Mon Nov 12 14:39:37 2007
+ #
+ # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
+ #
+@@ -266,7 +266,7 @@
+ wismo SA1100_WISMO WISMO 249
+ ezlinx ARCH_EZLINX EZLINX 250
+ at91rm9200 ARCH_AT91RM9200 AT91RM9200 251
+-orion ARCH_ORION ORION 252
++adtech_orion ARCH_ADTECH_ORION ADTECH_ORION 252
+ neptune ARCH_NEPTUNE NEPTUNE 253
+ hackkit SA1100_HACKKIT HACKKIT 254
+ pxa_wins30 ARCH_PXA_WINS30 PXA_WINS30 255
+@@ -661,7 +661,7 @@
+ pnx0105 MACH_PNX0105 PNX0105 646
+ adcpoecpu MACH_ADCPOECPU ADCPOECPU 647
+ csb637 MACH_CSB637 CSB637 648
+-ml69q6203 MACH_ML69Q6203 ML69Q6203 649
++ml675050 MACH_ML69Q6203 ML69Q6203 649
+ mb9200 MACH_MB9200 MB9200 650
+ kulun MACH_KULUN KULUN 651
+ snapper MACH_SNAPPER SNAPPER 652
+@@ -953,7 +953,7 @@
+ ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940
+ nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941
+ netdcu8 MACH_NETDCU8 NETDCU8 942
+-ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943
++ml675050_dev_sys MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943
+ ng_fvx538 MACH_NG_FVX538 NG_FVX538 944
+ ng_fvs338 MACH_NG_FVS338 NG_FVS338 945
+ pnx4103 MACH_PNX4103 PNX4103 946
+@@ -1148,7 +1148,7 @@
+ rema MACH_REMA REMA 1135
+ bps1000 MACH_BPS1000 BPS1000 1136
+ hw90350 MACH_HW90350 HW90350 1137
+-omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138
++omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138
+ bluetouch MACH_BLUETOUCH BLUETOUCH 1139
+ vstms MACH_VSTMS VSTMS 1140
+ xsbase270 MACH_XSBASE270 XSBASE270 1141
+@@ -1214,7 +1214,7 @@
+ kbat9261 MACH_KBAT9261 KBAT9261 1204
+ ct1100 MACH_CT1100 CT1100 1205
+ akcppxa MACH_AKCPPXA AKCPPXA 1206
+-zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207
++ochaya1020 MACH_OCHAYA1020 OCHAYA1020 1207
+ hitrack MACH_HITRACK HITRACK 1208
+ syme1 MACH_SYME1 SYME1 1209
+ syhl1 MACH_SYHL1 SYHL1 1210
+@@ -1299,7 +1299,7 @@
+ h4300 MACH_H4300 H4300 1291
+ goramo_mlr MACH_GORAMO_MLR GORAMO_MLR 1292
+ mxc30020evb MACH_MXC30020EVB MXC30020EVB 1293
+-adsbitsymx MACH_ADSBITSIMX ADSBITSIMX 1294
++adsbitsyg5 MACH_ADSBITSIMX ADSBITSIMX 1294
+ adsportalplus MACH_ADSPORTALPLUS ADSPORTALPLUS 1295
+ mmsp2plus MACH_MMSP2PLUS MMSP2PLUS 1296
+ em_x270 MACH_EM_X270 EM_X270 1297
+@@ -1367,3 +1367,190 @@
+ csb726 MACH_CSB726 CSB726 1359
+ tik27 MACH_TIK27 TIK27 1360
+ mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361
++rirm3 MACH_RIRM3 RIRM3 1362
++pelco_odyssey MACH_PELCO_ODYSSEY PELCO_ODYSSEY 1363
++arm920t MACH_ARM920T ARM920T 1364
++add_abox MACH_ADD_ABOX ADD_ABOX 1365
++add_tpid MACH_ADD_TPID ADD_TPID 1366
++minicheck MACH_MINICHECK MINICHECK 1367
++idam MACH_IDAM IDAM 1368
++mario_mx MACH_MARIO_MX MARIO_MX 1369
++vi1888 MACH_VI1888 VI1888 1370
++zr4230 MACH_ZR4230 ZR4230 1371
++t1_ix_blue MACH_T1_IX_BLUE T1_IX_BLUE 1372
++syhq2 MACH_SYHQ2 SYHQ2 1373
++computime_r3 MACH_COMPUTIME_R3 COMPUTIME_R3 1374
++oratis MACH_ORATIS ORATIS 1375
++mikko MACH_MIKKO MIKKO 1376
++holon MACH_HOLON HOLON 1377
++olip8 MACH_OLIP8 OLIP8 1378
++ghi270hg MACH_GHI270HG GHI270HG 1379
++davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380
++davinci_dm355_evm MACH_DAVINCI_DM350_EVM DAVINCI_DM350_EVM 1381
++ocearm MACH_OCEARMTEST OCEARMTEST 1382
++blackriver MACH_BLACKRIVER BLACKRIVER 1383
++sandgate_wp MACH_SANDGATEWP SANDGATEWP 1384
++cdotbwsg MACH_CDOTBWSG CDOTBWSG 1385
++quark963 MACH_QUARK963 QUARK963 1386
++csb735 MACH_CSB735 CSB735 1387
++littleton MACH_LITTLETON LITTLETON 1388
++mio_p550 MACH_MIO_P550 MIO_P550 1389
++motion2440 MACH_MOTION2440 MOTION2440 1390
++imm500 MACH_IMM500 IMM500 1391
++homematic MACH_HOMEMATIC HOMEMATIC 1392
++ermine MACH_ERMINE ERMINE 1393
++kb9202b MACH_KB9202B KB9202B 1394
++hs1xx MACH_HS1XX HS1XX 1395
++studentmate2440 MACH_STUDENTMATE2440 STUDENTMATE2440 1396
++arvoo_l1_z1 MACH_ARVOO_L1_Z1 ARVOO_L1_Z1 1397
++dep2410k MACH_DEP2410K DEP2410K 1398
++xxsvideo MACH_XXSVIDEO XXSVIDEO 1399
++im4004 MACH_IM4004 IM4004 1400
++ochaya1050 MACH_OCHAYA1050 OCHAYA1050 1401
++lep9261 MACH_LEP9261 LEP9261 1402
++svenmeb MACH_SVENMEB SVENMEB 1403
++fortunet2ne MACH_FORTUNET2NE FORTUNET2NE 1404
++omap2 MACH_OMAP2 OMAP2 1405
++nxhx MACH_NXHX NXHX 1406
++realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407
++ids500 MACH_IDS500 IDS500 1408
++ors_n725 MACH_ORS_N725 ORS_N725 1409
++hsdarm MACH_HSDARM HSDARM 1410
++sha_pon003 MACH_SHA_PON003 SHA_PON003 1411
++sha_pon004 MACH_SHA_PON004 SHA_PON004 1412
++sha_pon007 MACH_SHA_PON007 SHA_PON007 1413
++sha_pon011 MACH_SHA_PON011 SHA_PON011 1414
++h6042 MACH_H6042 H6042 1415
++h6043 MACH_H6043 H6043 1416
++looxc550 MACH_LOOXC550 LOOXC550 1417
++cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
++app3xx MACH_APP3XX APP3XX 1419
++sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
++xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421
++xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422
++xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423
++xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424
++ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
++sarge MACH_SARGE SARGE 1426
++a696 MACH_A696 A696 1427
++turtle1916 MACH_TURTLE TURTLE 1428
++pxa1916 MACH_MY5910TURTLE MY5910TURTLE 1429
++mx27_3ds MACH_MX27_3DS MX27_3DS 1430
++bishop MACH_BISHOP BISHOP 1431
++pxx MACH_PXX PXX 1432
++redwood MACH_REDWOOD REDWOOD 1433
++dummy MACH_OMAP2430DLP OMAP2430DLP 1434
++dummy_board MACH_OMAP2430OSK OMAP2430OSK 1435
++omap_2430dlp MACH_OMAP_2430DLP OMAP_2430DLP 1436
++omap_2430osk MACH_OMAP_2430OSK OMAP_2430OSK 1437
++sardine MACH_SARDINE SARDINE 1438
++halibut MACH_HALIBUT HALIBUT 1439
++trout MACH_TROUT TROUT 1440
++goldfish MACH_GOLDFISH GOLDFISH 1441
++gesbc2440 MACH_GESBC2440 GESBC2440 1442
++nomad MACH_NOMAD NOMAD 1443
++rosalind MACH_ROSALIND ROSALIND 1444
++cc9p9215 MACH_CC9P9215 CC9P9215 1445
++cc9p9210 MACH_CC9P9210 CC9P9210 1446
++cc9p9215js MACH_CC9P9215JS CC9P9215JS 1447
++cc9p9210js MACH_CC9P9210JS CC9P9210JS 1448
++nasffe MACH_NASFFE NASFFE 1449
++tn2x0bd MACH_TN2X0BD TN2X0BD 1450
++gwmpxa MACH_GWMPXA GWMPXA 1451
++exyplus MACH_EXYPLUS EXYPLUS 1452
++jadoo21 MACH_JADOO21 JADOO21 1453
++looxn560 MACH_LOOXN560 LOOXN560 1454
++bonsai MACH_BONSAI BONSAI 1455
++adsmilgato MACH_ADSMILGATO ADSMILGATO 1456
++gba MACH_GBA GBA 1457
++h6044 MACH_H6044 H6044 1458
++app MACH_APP APP 1459
++tct_hammer MACH_TCT_HAMMER TCT_HAMMER 1460
++herald MACH_HERMES HERMES 1461
++artemis MACH_ARTEMIS ARTEMIS 1462
++htctitan MACH_HTCTITAN HTCTITAN 1463
++qranium MACH_QRANIUM QRANIUM 1464
++add_wsc2 MACH_ADD_WSC2 ADD_WSC2 1465
++add_medinet MACH_ADD_MEDINET ADD_MEDINET 1466
++bboard MACH_BBOARD BBOARD 1467
++cambria MACH_CAMBRIA CAMBRIA 1468
++mt7xxx MACH_MT7XXX MT7XXX 1469
++matrix512 MACH_MATRIX512 MATRIX512 1470
++matrix522 MACH_MATRIX522 MATRIX522 1471
++ipac5010 MACH_IPAC5010 IPAC5010 1472
++sakura MACH_SAKURA SAKURA 1473
++grocx MACH_GROCX GROCX 1474
++pm9263 MACH_PM9263 PM9263 1475
++sim_one MACH_SIM_ONE SIM_ONE 1476
++acq132 MACH_ACQ132 ACQ132 1477
++datr MACH_DATR DATR 1478
++actux1 MACH_ACTUX1 ACTUX1 1479
++actux2 MACH_ACTUX2 ACTUX2 1480
++actux3 MACH_ACTUX3 ACTUX3 1481
++flexit MACH_FLEXIT FLEXIT 1482
++bh2x0bd MACH_BH2X0BD BH2X0BD 1483
++atb2002 MACH_ATB2002 ATB2002 1484
++xenon MACH_XENON XENON 1485
++fm607 MACH_FM607 FM607 1486
++matrix514 MACH_MATRIX514 MATRIX514 1487
++matrix524 MACH_MATRIX524 MATRIX524 1488
++inpod MACH_INPOD INPOD 1489
++jive MACH_JIVE JIVE 1490
++tll_mx21 MACH_TLL_MX21 TLL_MX21 1491
++sbc2800 MACH_SBC2800 SBC2800 1492
++cc7ucamry MACH_CC7UCAMRY CC7UCAMRY 1493
++ubisys_p9_sc15 MACH_UBISYS_P9_SC15 UBISYS_P9_SC15 1494
++ubisys_p9_ssc2d10 MACH_UBISYS_P9_SSC2D10 UBISYS_P9_SSC2D10 1495
++ubisys_p9_rcu3 MACH_UBISYS_P9_RCU3 UBISYS_P9_RCU3 1496
++aml_m8000 MACH_AML_M8000 AML_M8000 1497
++snapper_270 MACH_SNAPPER_270 SNAPPER_270 1498
++omap_bbx MACH_OMAP_BBX OMAP_BBX 1499
++ucn2410 MACH_UCN2410 UCN2410 1500
++sam9_l9260 MACH_SAM9_L9260 SAM9_L9260 1501
++eti_c2 MACH_ETI_C2 ETI_C2 1502
++avalanche MACH_AVALANCHE AVALANCHE 1503
++realview_pb1176 MACH_REALVIEW_PB1176 REALVIEW_PB1176 1504
++dp1500 MACH_DP1500 DP1500 1505
++apple_iphone MACH_APPLE_IPHONE APPLE_IPHONE 1506
++yl9200 MACH_YL9200 YL9200 1507
++rd88f5182 MACH_RD88F5182 RD88F5182 1508
++kurobox_pro MACH_KUROBOX_PRO KUROBOX_PRO 1509
++se_poet MACH_SE_POET SE_POET 1510
++mx31_3ds MACH_MX31_3DS MX31_3DS 1511
++r270 MACH_R270 R270 1512
++armour21 MACH_ARMOUR21 ARMOUR21 1513
++dt2 MACH_DT2 DT2 1514
++vt4 MACH_VT4 VT4 1515
++tyco320 MACH_TYCO320 TYCO320 1516
++adma MACH_ADMA ADMA 1517
++wp188 MACH_WP188 WP188 1518
++corsica MACH_CORSICA CORSICA 1519
++bigeye MACH_BIGEYE BIGEYE 1520
++machine_is_arm2410 MACH_MACHINE_IS_ARM2410 MACHINE_IS_ARM2410 1521
++tll5000 MACH_TLL5000 TLL5000 1522
++hni270 MACH_HNI_X270 HNI_X270 1523
++qong MACH_QONG QONG 1524
++tcompact MACH_TCOMPACT TCOMPACT 1525
++puma5 MACH_PUMA5 PUMA5 1526
++elara MACH_ELARA ELARA 1527
++ellington MACH_ELLINGTON ELLINGTON 1528
++xda_atom MACH_XDA_ATOM XDA_ATOM 1529
++energizer2 MACH_ENERGIZER2 ENERGIZER2 1530
++odin MACH_ODIN ODIN 1531
++actux4 MACH_ACTUX4 ACTUX4 1532
++esl_omap MACH_ESL_OMAP ESL_OMAP 1533
++omap2evm MACH_OMAP2EVM OMAP2EVM 1534
++omap3evm MACH_OMAP3EVM OMAP3EVM 1535
++add_pcu57 MACH_ADD_PCU57 ADD_PCU57 1536
++monaco MACH_MONACO MONACO 1537
++levante MACH_LEVANTE LEVANTE 1538
++tmxipx425 MACH_TMXIPX425 TMXIPX425 1539
++leep MACH_LEEP LEEP 1540
++raad MACH_RAAD RAAD 1541
++dns323 MACH_DNS323 DNS323 1542
++ap1000 MACH_AP1000 AP1000 1543
++a9sam6432 MACH_A9SAM6432 A9SAM6432 1544
++shiny MACH_SHINY SHINY 1545
++omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546
++csr_bdb2 MACH_CSR_BDB2 CSR_BDB2 1547
++at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566
+diff -urN -x CVS linux-2.6.24/drivers/char/Kconfig linux-2.6/drivers/char/Kconfig
+--- linux-2.6.24/drivers/char/Kconfig 2008-03-01 22:02:10.000000000 +0200
++++ linux-2.6/drivers/char/Kconfig 2008-02-18 22:56:04.000000000 +0200
+@@ -1040,5 +1040,21 @@
+
+ source "drivers/s390/char/Kconfig"
+
++config AT91_SPI
++ bool "SPI driver (legacy) for AT91RM9200 processors"
++ depends on ARCH_AT91RM9200
++ default y
++ help
++ The SPI driver gives access to this serial bus on the AT91RM9200
++ processor.
++
++config AT91_SPIDEV
++ bool "SPI device interface (legacy) for AT91RM9200 processors"
++ depends on ARCH_AT91RM9200 && AT91_SPI
++ default n
++ help
++ The SPI driver gives user mode access to this serial
++ bus on the AT91RM9200 processor.
++
+ endmenu
+
+diff -urN -x CVS linux-2.6.24/drivers/char/Makefile linux-2.6/drivers/char/Makefile
+--- linux-2.6.24/drivers/char/Makefile 2008-03-01 22:02:10.000000000 +0200
++++ linux-2.6/drivers/char/Makefile 2007-12-31 10:43:55.000000000 +0200
+@@ -96,6 +96,8 @@
+ obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
+ obj-$(CONFIG_GPIO_TB0219) += tb0219.o
+ obj-$(CONFIG_TELCLOCK) += tlclk.o
++obj-$(CONFIG_AT91_SPI) += at91_spi.o
++obj-$(CONFIG_AT91_SPIDEV) += at91_spidev.o
+
+ obj-$(CONFIG_MWAVE) += mwave/
+ obj-$(CONFIG_AGP) += agp/
+diff -urN -x CVS linux-2.6.24/drivers/char/at91_spi.c linux-2.6/drivers/char/at91_spi.c
+--- linux-2.6.24/drivers/char/at91_spi.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/drivers/char/at91_spi.c 2007-12-31 15:18:43.000000000 +0200
+@@ -0,0 +1,336 @@
++/*
++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
++ *
++ * Copyright (C) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/dma-mapping.h>
++#include <linux/module.h>
++#include <linux/sched.h>
++#include <linux/completion.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <linux/atmel_pdc.h>
++#include <asm/io.h>
++#include <asm/semaphore.h>
++
++#include <asm/arch/at91_spi.h>
++#include <asm/arch/board.h>
++#include <asm/arch/spi.h>
++
++#undef DEBUG_SPI
++
++static struct spi_local spi_dev[NR_SPI_DEVICES]; /* state of the SPI devices */
++static int spi_enabled = 0;
++static struct semaphore spi_lock; /* protect access to SPI bus */
++static int current_device = -1; /* currently selected SPI device */
++static struct clk *spi_clk; /* SPI clock */
++static void __iomem *spi_base; /* SPI peripheral base-address */
++
++DECLARE_COMPLETION(transfer_complete);
++
++
++#define at91_spi_read(reg) __raw_readl(spi_base + (reg))
++#define at91_spi_write(reg, val) __raw_writel((val), spi_base + (reg))
++
++
++/* ......................................................................... */
++
++/*
++ * Access and enable the SPI bus.
++ * This MUST be called before any transfers are performed.
++ */
++void spi_access_bus(short device)
++{
++ /* Ensure that requested device is valid */
++ if ((device < 0) || (device >= NR_SPI_DEVICES))
++ panic("at91_spi: spi_access_bus called with invalid device");
++
++ if (spi_enabled == 0) {
++ clk_enable(spi_clk); /* Enable Peripheral clock */
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
++#ifdef DEBUG_SPI
++ printk("SPI on\n");
++#endif
++ }
++ spi_enabled++;
++
++ /* Lock the SPI bus */
++ down(&spi_lock);
++ current_device = device;
++
++ /* Configure SPI bus for device */
++ at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
++}
++
++/*
++ * Relinquish control of the SPI bus.
++ */
++void spi_release_bus(short device)
++{
++ if (device != current_device)
++ panic("at91_spi: spi_release called with invalid device");
++
++ /* Release the SPI bus */
++ current_device = -1;
++ up(&spi_lock);
++
++ spi_enabled--;
++ if (spi_enabled == 0) {
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
++ clk_disable(spi_clk); /* Disable Peripheral clock */
++#ifdef DEBUG_SPI
++ printk("SPI off\n");
++#endif
++ }
++}
++
++/*
++ * Perform a data transfer over the SPI bus
++ */
++int spi_transfer(struct spi_transfer_list* list)
++{
++ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
++ int tx_size;
++
++ if (!list)
++ panic("at91_spi: spi_transfer called with NULL transfer list");
++ if (current_device == -1)
++ panic("at91_spi: spi_transfer called without acquiring bus");
++
++#ifdef DEBUG_SPI
++ printk("SPI transfer start [%i]\n", list->nr_transfers);
++#endif
++
++ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
++ tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
++
++ /* Store transfer list */
++ device->xfers = list;
++ list->curr = 0;
++
++ /* Assume there must be at least one transfer */
++ device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
++ device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
++
++ /* Program PDC registers */
++ at91_spi_write(ATMEL_PDC_TPR, device->tx);
++ at91_spi_write(ATMEL_PDC_RPR, device->rx);
++ at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
++ at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
++
++ /* Is there a second transfer? */
++ if (list->nr_transfers > 1) {
++ device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
++ device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
++
++ /* Program Next PDC registers */
++ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
++ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
++ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
++ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
++ }
++ else {
++ device->txnext = 0;
++ device->rxnext = 0;
++ at91_spi_write(ATMEL_PDC_TNCR, 0);
++ at91_spi_write(ATMEL_PDC_RNCR, 0);
++ }
++
++ // TODO: If we are doing consecutive transfers (at high speed, or
++ // small buffers), then it might be worth modifying the 'Delay between
++ // Consecutive Transfers' in the CSR registers.
++ // This is an issue if we cannot chain the next buffer fast enough
++ // in the interrupt handler.
++
++ /* Enable transmitter and receiver */
++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
++
++ at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX); /* enable buffer complete interrupt */
++ wait_for_completion(&transfer_complete);
++
++#ifdef DEBUG_SPI
++ printk("SPI transfer end\n");
++#endif
++
++ return 0;
++}
++
++/* ......................................................................... */
++
++/*
++ * Handle interrupts from the SPI controller.
++ */
++static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
++{
++ unsigned int status;
++ struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
++ struct spi_transfer_list *list = device->xfers;
++
++#ifdef DEBUG_SPI
++ printk("SPI interrupt %i\n", current_device);
++#endif
++
++ if (!list)
++ panic("at91_spi: spi_interrupt with a NULL transfer list");
++
++ status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR); /* read status */
++
++ dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
++ dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
++
++ device->tx = device->txnext; /* move next transfer to current transfer */
++ device->rx = device->rxnext;
++
++ list->curr = list->curr + 1;
++ if (list->curr == list->nr_transfers) { /* all transfers complete */
++ at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX); /* disable interrupt */
++
++ /* Disable transmitter and receiver */
++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
++
++ device->xfers = NULL;
++ complete(&transfer_complete);
++ }
++ else if (list->curr+1 == list->nr_transfers) { /* no more next transfers */
++ device->txnext = 0;
++ device->rxnext = 0;
++ at91_spi_write(ATMEL_PDC_TNCR, 0);
++ at91_spi_write(ATMEL_PDC_RNCR, 0);
++ }
++ else {
++ int i = (list->curr)+1;
++
++ /* If we are in 16-bit mode, we need to modify what we pass to the PDC */
++ int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
++
++ device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
++ device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
++ at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
++ at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
++ at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
++ at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
++ }
++ return IRQ_HANDLED;
++}
++
++/* ......................................................................... */
++
++/*
++ * Initialize the SPI controller
++ */
++static int __init at91spi_probe(struct platform_device *pdev)
++{
++ int i;
++ unsigned long scbr;
++ struct resource *res;
++
++ init_MUTEX(&spi_lock);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res)
++ return -ENXIO;
++
++ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
++ return -EBUSY;
++
++ spi_base = ioremap(res->start, res->end - res->start + 1);
++ if (!spi_base) {
++ release_mem_region(res->start, res->end - res->start + 1);
++ return -ENOMEM;
++ }
++
++ spi_clk = clk_get(NULL, "spi_clk");
++ if (IS_ERR(spi_clk)) {
++ printk(KERN_ERR "at91_spi: no clock defined\n");
++ iounmap(spi_base);
++ release_mem_region(res->start, res->end - res->start + 1);
++ return -ENODEV;
++ }
++
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST); /* software reset of SPI controller */
++
++ /*
++ * Calculate the correct SPI baud-rate divisor.
++ */
++ scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
++ scbr = scbr + 1; /* round up */
++
++ printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
++
++ /* Set Chip Select registers to good defaults */
++ for (i = 0; i < 4; i++) {
++ at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
++ }
++
++ at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
++
++ memset(&spi_dev, 0, sizeof(spi_dev));
++ spi_dev[0].pcs = 0xE;
++ spi_dev[1].pcs = 0xD;
++ spi_dev[2].pcs = 0xB;
++ spi_dev[3].pcs = 0x7;
++
++ if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
++ clk_put(spi_clk);
++ iounmap(spi_base);
++ release_mem_region(res->start, res->end - res->start + 1);
++ return -EBUSY;
++ }
++
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN); /* Enable SPI */
++
++ return 0;
++}
++
++static int __devexit at91spi_remove(struct platform_device *pdev)
++{
++ struct resource *res;
++
++ at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS); /* Disable SPI */
++ clk_put(spi_clk);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ iounmap(spi_base);
++ release_mem_region(res->start, res->end - res->start + 1);
++
++ free_irq(AT91RM9200_ID_SPI, 0);
++ return 0;
++}
++
++static struct platform_driver at91spi_driver = {
++ .probe = at91spi_probe,
++ .remove = __devexit_p(at91spi_remove),
++ .driver = {
++ .name = "at91_spi",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at91spi_init(void)
++{
++ return platform_driver_register(&at91spi_driver);
++}
++
++static void __exit at91spi_exit(void)
++{
++ platform_driver_unregister(&at91spi_driver);
++}
++
++EXPORT_SYMBOL(spi_access_bus);
++EXPORT_SYMBOL(spi_release_bus);
++EXPORT_SYMBOL(spi_transfer);
++
++module_init(at91spi_init);
++module_exit(at91spi_exit);
++
++MODULE_LICENSE("GPL")
++MODULE_AUTHOR("Andrew Victor")
++MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
+diff -urN -x CVS linux-2.6.24/drivers/char/at91_spidev.c linux-2.6/drivers/char/at91_spidev.c
+--- linux-2.6.24/drivers/char/at91_spidev.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/drivers/char/at91_spidev.c 2007-12-31 15:18:43.000000000 +0200
+@@ -0,0 +1,233 @@
++/*
++ * User-space interface to the SPI bus on Atmel AT91RM9200
++ *
++ * Copyright (C) 2003 SAN People (Pty) Ltd
++ *
++ * Based on SPI driver by Rick Bronson
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/highmem.h>
++#include <linux/pagemap.h>
++#include <asm/arch/spi.h>
++
++#ifdef CONFIG_DEVFS_FS
++#include <linux/devfs_fs_kernel.h>
++#endif
++
++
++#undef DEBUG_SPIDEV
++
++/* ......................................................................... */
++
++/*
++ * Read or Write to SPI bus.
++ */
++static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
++{
++ unsigned int spi_device = (unsigned int) file->private_data;
++
++ struct mm_struct * mm;
++ struct page ** maplist;
++ struct spi_transfer_list* list;
++ int pgcount;
++
++ unsigned int ofs, pagelen;
++ int res, i, err;
++
++ if (!count) {
++ return 0;
++ }
++
++ list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
++ if (!list) {
++ return -ENOMEM;
++ }
++
++ mm = current->mm;
++
++ pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
++
++ if (pgcount >= MAX_SPI_TRANSFERS) {
++ kfree(list);
++ return -EFBIG;
++ }
++
++ maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
++
++ if (!maplist) {
++ kfree(list);
++ return -ENOMEM;
++ }
++ flush_cache_all();
++ down_read(&mm->mmap_sem);
++ err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
++ up_read(&mm->mmap_sem);
++
++ if (err < 0) {
++ kfree(list);
++ kfree(maplist);
++ return err;
++ }
++ pgcount = err;
++
++#ifdef DEBUG_SPIDEV
++ printk("spidev_rd_rw: %i %i\n", count, pgcount);
++#endif
++
++ /* Set default return value = transfer length */
++ res = count;
++
++ /*
++ * At this point, the virtual area buf[0] .. buf[count-1] will have
++ * corresponding pages mapped in the physical memory and locked until
++ * we unmap the kiobuf. The pages cannot be swapped out or moved
++ * around.
++ */
++ ofs = (unsigned long) buf & (PAGE_SIZE -1);
++ pagelen = PAGE_SIZE - ofs;
++ if (count < pagelen)
++ pagelen = count;
++
++ for (i = 0; i < pgcount; i++) {
++ flush_dcache_page(maplist[i]);
++
++ list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
++ list->txlen[i] = list->rxlen[i] = pagelen;
++
++#ifdef DEBUG_SPIDEV
++ printk(" %i: %x (%i)\n", i, list->tx[i], list->txlen[i]);
++#endif
++
++ ofs = 0; /* all subsequent transfers start at beginning of a page */
++ count = count - pagelen;
++ pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
++ }
++ list->nr_transfers = pgcount;
++
++ /* Perform transfer on SPI bus */
++ spi_access_bus(spi_device);
++ spi_transfer(list);
++ spi_release_bus(spi_device);
++
++ while (pgcount--) {
++ page_cache_release (maplist[pgcount]);
++ }
++ flush_cache_all();
++
++ kfree(maplist);
++ kfree(list);
++
++ return res;
++}
++
++static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
++{
++ int spi_device = MINOR(inode->i_rdev);
++
++ if (spi_device >= NR_SPI_DEVICES)
++ return -ENODEV;
++
++ // TODO: This interface can be used to configure the SPI bus.
++ // Configurable options could include: Speed, Clock Polarity, Clock Phase
++
++ switch(cmd) {
++ default:
++ return -ENOIOCTLCMD;
++ }
++}
++
++/*
++ * Open the SPI device
++ */
++static int spidev_open(struct inode *inode, struct file *file)
++{
++ unsigned int spi_device = MINOR(inode->i_rdev);
++
++ if (spi_device >= NR_SPI_DEVICES)
++ return -ENODEV;
++
++ /*
++ * 'private_data' is actually a pointer, but we overload it with the
++ * value we want to store.
++ */
++ file->private_data = (void *)spi_device;
++
++ return 0;
++}
++
++/*
++ * Close the SPI device
++ */
++static int spidev_close(struct inode *inode, struct file *file)
++{
++ return 0;
++}
++
++/* ......................................................................... */
++
++static struct file_operations spidev_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .read = spidev_rd_wr,
++ .write = (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
++ .ioctl = spidev_ioctl,
++ .open = spidev_open,
++ .release = spidev_close,
++};
++
++/*
++ * Install the SPI /dev interface driver
++ */
++static int __init at91_spidev_init(void)
++{
++#ifdef CONFIG_DEVFS_FS
++ int i;
++#endif
++
++ if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
++ printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
++ return -EIO;
++ }
++
++#ifdef CONFIG_DEVFS_FS
++ devfs_mk_dir("spi");
++ for (i = 0; i < NR_SPI_DEVICES; i++) {
++ devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
++ }
++#endif
++ printk(KERN_INFO "AT91 SPI driver loaded\n");
++
++ return 0;
++}
++
++/*
++ * Remove the SPI /dev interface driver
++ */
++static void __exit at91_spidev_exit(void)
++{
++#ifdef CONFIG_DEVFS_FS
++ int i;
++ for (i = 0; i < NR_SPI_DEVICES; i++) {
++ devfs_remove("spi/%d", i);
++ }
++
++ devfs_remove("spi");
++#endif
++
++ unregister_chrdev(SPI_MAJOR, "spi");
++}
++
++module_init(at91_spidev_init);
++module_exit(at91_spidev_exit);
++
++MODULE_LICENSE("GPL")
++MODULE_AUTHOR("Andrew Victor")
++MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
+diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/Kconfig linux-2.6/drivers/i2c/busses/Kconfig
+--- linux-2.6.24/drivers/i2c/busses/Kconfig 2008-03-01 22:02:10.000000000 +0200
++++ linux-2.6/drivers/i2c/busses/Kconfig 2007-12-31 10:44:20.000000000 +0200
+@@ -88,6 +88,14 @@
+ to support combined I2C messages. Use the i2c-gpio driver
+ unless your system can cope with those limitations.
+
++config I2C_AT91_CLOCKRATE
++ prompt "Atmel AT91 I2C/TWI clock-rate"
++ depends on I2C_AT91
++ int
++ default 100000
++ help
++ Set the AT91 I2C/TWI clock-rate.
++
+ config I2C_AU1550
+ tristate "Au1550/Au1200 SMBus interface"
+ depends on SOC_AU1550 || SOC_AU1200
+@@ -629,6 +637,14 @@
+ This driver can also be built as a module. If so, the module
+ will be called i2c-voodoo3.
+
++config I2C_PCA
++ tristate "PCA9564"
++ depends on I2C
++ select I2C_ALGOPCA
++ help
++ This driver support the Philips PCA 9564 Parallel bus to I2C
++ bus controller.
++
+ config I2C_PCA_ISA
+ tristate "PCA9564 on an ISA bus"
+ depends on ISA
+diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/Makefile linux-2.6/drivers/i2c/busses/Makefile
+--- linux-2.6.24/drivers/i2c/busses/Makefile 2008-03-01 22:02:10.000000000 +0200
++++ linux-2.6/drivers/i2c/busses/Makefile 2007-12-31 10:44:20.000000000 +0200
+@@ -30,6 +30,7 @@
+ obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
+ obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
+ obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
++obj-$(CONFIG_I2C_PCA) += i2c-pca.o
+ obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
+ obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
+ obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
+diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/i2c-at91.c linux-2.6/drivers/i2c/busses/i2c-at91.c
+--- linux-2.6.24/drivers/i2c/busses/i2c-at91.c 2008-03-01 22:02:10.000000000 +0200
++++ linux-2.6/drivers/i2c/busses/i2c-at91.c 2008-01-16 13:15:34.000000000 +0200
+@@ -31,8 +31,11 @@
+ #include <asm/arch/board.h>
+ #include <asm/arch/cpu.h>
+
+-#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
+
++/* Clockrate is configurable - max 400 Kbits/sec */
++static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
++module_param(clockrate, uint, 0);
++MODULE_PARM_DESC(clockrate, "The TWI clockrate");
+
+ static struct clk *twi_clk;
+ static void __iomem *twi_base;
+@@ -53,7 +56,7 @@
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
+
+ /* Calcuate clock dividers */
+- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
++ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
+ cdiv = cdiv + 1; /* round up */
+ ckdiv = 0;
+ while (cdiv > 255) {
+@@ -61,11 +64,12 @@
+ cdiv = cdiv >> 1;
+ }
+
+- if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */
+- if (ckdiv > 5) {
+- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
+- ckdiv = 5;
+- }
++ if (cpu_is_at91rm9200() && (ckdiv > 5)) { /* AT91RM9200 Errata #22 */
++ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
++ ckdiv = 5;
++ } else if (ckdiv > 7) {
++ printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
++ ckdiv = 7;
+ }
+
+ at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
+diff -urN -x CVS linux-2.6.24/drivers/i2c/busses/i2c-pca.c linux-2.6/drivers/i2c/busses/i2c-pca.c
+--- linux-2.6.24/drivers/i2c/busses/i2c-pca.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/drivers/i2c/busses/i2c-pca.c 2007-12-31 15:18:43.000000000 +0200
+@@ -0,0 +1,213 @@
++/*
++ * Platform driver for PCA9564 I2C bus controller.
++ *
++ * (C) 2006 Andrew Victor
++ *
++ * Based on i2c-pca-isa.c driver for PCA9564 on ISA boards
++ * Copyright (C) 2004 Arcom Control Systems
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/wait.h>
++#include <linux/platform_device.h>
++
++#include <linux/i2c.h>
++#include <linux/i2c-algo-pca.h>
++
++#include <asm/io.h>
++
++#include "../algos/i2c-algo-pca.h"
++
++#define PCA_OWN_ADDRESS 0x55 /* our address for slave mode */
++#define PCA_CLOCK I2C_PCA_CON_59kHz
++
++//#define REG_SHIFT 2
++#define REG_SHIFT 0
++
++//#define DEBUG_IO
++
++#define PCA_IO_SIZE 4
++
++static void __iomem *base_addr;
++static int irq;
++static wait_queue_head_t pca_wait;
++
++static int pca_getown(struct i2c_algo_pca_data *adap)
++{
++ return PCA_OWN_ADDRESS;
++}
++
++static int pca_getclock(struct i2c_algo_pca_data *adap)
++{
++ return PCA_CLOCK;
++}
++
++static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
++{
++#ifdef DEBUG_IO
++ static char *names[] = { "T/O", "DAT", "ADR", "CON" };
++ printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val);
++#endif
++ udelay(1);
++ outb(val, base_addr + (reg << REG_SHIFT));
++}
++
++static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg)
++{
++ int res;
++
++ udelay(1);
++ res = inb(base_addr + (reg << REG_SHIFT));
++#ifdef DEBUG_IO
++ {
++ static char *names[] = { "STA", "DAT", "ADR", "CON" };
++ printk("*** read %s => %#04x\n", names[reg], res);
++ }
++#endif
++ return res;
++}
++
++static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap)
++{
++ int ret = 0;
++
++ if (irq > -1) {
++ ret = wait_event_interruptible(pca_wait,
++ pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
++ } else {
++ while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
++ udelay(100);
++ }
++ return ret;
++}
++
++static irqreturn_t pca_handler(int this_irq, void *dev_id)
++{
++ wake_up_interruptible(&pca_wait);
++ return IRQ_HANDLED;
++}
++
++static struct i2c_algo_pca_data pca_i2c_data = {
++ .get_own = pca_getown,
++ .get_clock = pca_getclock,
++ .write_byte = pca_writebyte,
++ .read_byte = pca_readbyte,
++ .wait_for_interrupt = pca_waitforinterrupt,
++};
++
++static struct i2c_adapter pca_i2c_ops = {
++ .owner = THIS_MODULE,
++ .id = I2C_HW_A_PLAT,
++ .algo_data = &pca_i2c_data,
++ .name = "PCA9564",
++ .class = I2C_CLASS_HWMON,
++};
++
++static int __devinit pca_i2c_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++
++ init_waitqueue_head(&pca_wait);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res)
++ return -ENODEV;
++
++ if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564"))
++ return -ENXIO;
++
++ base_addr = ioremap(res->start, PCA_IO_SIZE);
++ if (base_addr == NULL)
++ goto out_region;
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq > -1) {
++ if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) {
++ printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq);
++ goto out_remap;
++ }
++ }
++
++ /* set up the driverfs linkage to our parent device */
++ pca_i2c_ops.dev.parent = &pdev->dev;
++
++ if (i2c_pca_add_bus(&pca_i2c_ops) < 0) {
++ printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n");
++ goto out_irq;
++ }
++
++ return 0;
++
++ out_irq:
++ if (irq > -1)
++ free_irq(irq, &pca_i2c_ops);
++
++ out_remap:
++ iounmap(base_addr);
++
++ out_region:
++ release_mem_region(res->start, PCA_IO_SIZE);
++ return -ENODEV;
++}
++
++static int __devexit pca_i2c_remove(struct platform_device *pdev)
++{
++ struct resource *res;
++
++ i2c_del_adapter(&pca_i2c_ops);
++
++ if (irq > 0)
++ free_irq(irq, NULL);
++
++ iounmap(base_addr);
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ release_mem_region(res->start, PCA_IO_SIZE);
++
++ return 0;
++}
++
++static struct platform_driver pca_i2c_driver = {
++ .probe = pca_i2c_probe,
++ .remove = __devexit_p(pca_i2c_remove),
++ .driver = {
++ .name = "pca9564",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init pca_i2c_init(void)
++{
++ return platform_driver_register(&pca_i2c_driver);
++}
++
++static void __exit pca_i2c_exit(void)
++{
++ platform_driver_unregister(&pca_i2c_driver);
++}
++
++module_init(pca_i2c_init);
++module_exit(pca_i2c_exit);
++
++MODULE_AUTHOR("Andrew Victor");
++MODULE_DESCRIPTION("PCA9564 platform driver");
++MODULE_LICENSE("GPL");
+diff -urN -x CVS linux-2.6.24/drivers/mmc/host/at91_mci.c linux-2.6/drivers/mmc/host/at91_mci.c
+--- linux-2.6.24/drivers/mmc/host/at91_mci.c 2008-03-01 22:02:12.000000000 +0200
++++ linux-2.6/drivers/mmc/host/at91_mci.c 2008-02-25 22:21:36.000000000 +0200
+@@ -70,10 +70,11 @@
+
+ #include <asm/io.h>
+ #include <asm/irq.h>
++#include <asm/gpio.h>
++
+ #include <asm/mach/mmc.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/cpu.h>
+-#include <asm/arch/gpio.h>
+ #include <asm/arch/at91_mci.h>
+
+ #define DRIVER_NAME "at91_mci"
+@@ -658,13 +659,14 @@
+ /* maybe switch power to the card */
+ if (host->board->vcc_pin) {
+ switch (ios->power_mode) {
+- case MMC_POWER_OFF:
+- at91_set_gpio_value(host->board->vcc_pin, 0);
+- break;
+- case MMC_POWER_UP:
+- case MMC_POWER_ON:
+- at91_set_gpio_value(host->board->vcc_pin, 1);
+- break;
++ case MMC_POWER_OFF:
++ gpio_set_value(host->board->vcc_pin, 0);
++ break;
++ case MMC_POWER_UP:
++ gpio_set_value(host->board->vcc_pin, 1);
++ break;
++ default:
++ break;
+ }
+ }
+ }
+@@ -768,7 +770,7 @@
+ static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
+ {
+ struct at91mci_host *host = _host;
+- int present = !at91_get_gpio_value(irq);
++ int present = !gpio_get_value(irq_to_gpio(irq));
+
+ /*
+ * we expect this irq on both insert and remove,
+@@ -793,7 +795,7 @@
+ struct at91mci_host *host = mmc_priv(mmc);
+
+ if (host->board->wp_pin) {
+- read_only = at91_get_gpio_value(host->board->wp_pin);
++ read_only = gpio_get_value(host->board->wp_pin);
+ printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc),
+ (read_only ? "read-only" : "read-write") );
+ }
+@@ -820,8 +822,6 @@
+ struct resource *res;
+ int ret;
+
+- pr_debug("Probe MCI devices\n");
+-
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENXIO;
+@@ -831,9 +831,9 @@
+
+ mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev);
+ if (!mmc) {
+- pr_debug("Failed to allocate mmc host\n");
+- release_mem_region(res->start, res->end - res->start + 1);
+- return -ENOMEM;
++ ret = -ENOMEM;
++ dev_dbg(&pdev->dev, "couldn't allocate mmc host\n");
++ goto fail6;
+ }
+
+ mmc->ops = &at91_mci_ops;
+@@ -853,19 +853,44 @@
+ if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+ else
+- printk("AT91 MMC: 4 wire bus mode not supported"
++ dev_warn(&pdev->dev, "4 wire bus mode not supported"
+ " - using 1 wire\n");
+ }
+
+ /*
++ * Reserve GPIOs ... board init code makes sure these pins are set
++ * up as GPIOs with the right direction (input, except for vcc)
++ */
++ if (host->board->det_pin) {
++ ret = gpio_request(host->board->det_pin, "mmc_detect");
++ if (ret < 0) {
++ dev_dbg(&pdev->dev, "couldn't claim card detect pin\n");
++ goto fail5;
++ }
++ }
++ if (host->board->wp_pin) {
++ ret = gpio_request(host->board->wp_pin, "mmc_wp");
++ if (ret < 0) {
++ dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n");
++ goto fail4;
++ }
++ }
++ if (host->board->vcc_pin) {
++ ret = gpio_request(host->board->vcc_pin, "mmc_vcc");
++ if (ret < 0) {
++ dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n");
++ goto fail3;
++ }
++ }
++
++ /*
+ * Get Clock
+ */
+ host->mci_clk = clk_get(&pdev->dev, "mci_clk");
+ if (IS_ERR(host->mci_clk)) {
+- printk(KERN_ERR "AT91 MMC: no clock defined.\n");
+- mmc_free_host(mmc);
+- release_mem_region(res->start, res->end - res->start + 1);
+- return -ENODEV;
++ ret = -ENODEV;
++ dev_dbg(&pdev->dev, "no mci_clk?\n");
++ goto fail2;
+ }
+
+ /*
+@@ -873,10 +898,8 @@
+ */
+ host->baseaddr = ioremap(res->start, res->end - res->start + 1);
+ if (!host->baseaddr) {
+- clk_put(host->mci_clk);
+- mmc_free_host(mmc);
+- release_mem_region(res->start, res->end - res->start + 1);
+- return -ENOMEM;
++ ret = -ENOMEM;
++ goto fail1;
+ }
+
+ /*
+@@ -890,15 +913,11 @@
+ * Allocate the MCI interrupt
+ */
+ host->irq = platform_get_irq(pdev, 0);
+- ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
++ ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED,
++ mmc_hostname(mmc), host);
+ if (ret) {
+- printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
+- clk_disable(host->mci_clk);
+- clk_put(host->mci_clk);
+- mmc_free_host(mmc);
+- iounmap(host->baseaddr);
+- release_mem_region(res->start, res->end - res->start + 1);
+- return ret;
++ dev_dbg(&pdev->dev, "request MCI interrupt failed\n");
++ goto fail0;
+ }
+
+ platform_set_drvdata(pdev, mmc);
+@@ -907,8 +926,7 @@
+ * Add host to MMC layer
+ */
+ if (host->board->det_pin) {
+- host->present = !at91_get_gpio_value(host->board->det_pin);
+- device_init_wakeup(&pdev->dev, 1);
++ host->present = !gpio_get_value(host->board->det_pin);
+ }
+ else
+ host->present = -1;
+@@ -919,15 +937,38 @@
+ * monitor card insertion/removal if we can
+ */
+ if (host->board->det_pin) {
+- ret = request_irq(host->board->det_pin, at91_mmc_det_irq,
+- 0, DRIVER_NAME, host);
++ ret = request_irq(gpio_to_irq(host->board->det_pin),
++ at91_mmc_det_irq, 0, mmc_hostname(mmc), host);
+ if (ret)
+- printk(KERN_ERR "AT91 MMC: Couldn't allocate MMC detect irq\n");
++ dev_warn(&pdev->dev, "request MMC detect irq failed\n");
++ else
++ device_init_wakeup(&pdev->dev, 1);
+ }
+
+ pr_debug("Added MCI driver\n");
+
+ return 0;
++
++fail0:
++ clk_disable(host->mci_clk);
++ iounmap(host->baseaddr);
++fail1:
++ clk_put(host->mci_clk);
++fail2:
++ if (host->board->vcc_pin)
++ gpio_free(host->board->vcc_pin);
++fail3:
++ if (host->board->wp_pin)
++ gpio_free(host->board->wp_pin);
++fail4:
++ if (host->board->det_pin)
++ gpio_free(host->board->det_pin);
++fail5:
++ mmc_free_host(mmc);
++fail6:
++ release_mem_region(res->start, res->end - res->start + 1);
++ dev_err(&pdev->dev, "probe failed, err %d\n", ret);
++ return ret;
+ }
+
+ /*
+@@ -945,9 +986,10 @@
+ host = mmc_priv(mmc);
+
+ if (host->board->det_pin) {
++ if (device_can_wakeup(&pdev->dev))
++ free_irq(gpio_to_irq(host->board->det_pin), host);
+ device_init_wakeup(&pdev->dev, 0);
+- free_irq(host->board->det_pin, host);
+- cancel_delayed_work(&host->mmc->detect);
++ gpio_free(host->board->det_pin);
+ }
+
+ at91_mci_disable(host);
+@@ -957,6 +999,11 @@
+ clk_disable(host->mci_clk); /* Disable the peripheral clock */
+ clk_put(host->mci_clk);
+
++ if (host->board->vcc_pin)
++ gpio_free(host->board->vcc_pin);
++ if (host->board->wp_pin)
++ gpio_free(host->board->wp_pin);
++
+ iounmap(host->baseaddr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start + 1);
+diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/Kconfig linux-2.6/drivers/mtd/devices/Kconfig
+--- linux-2.6.24/drivers/mtd/devices/Kconfig 2008-03-01 22:02:12.000000000 +0200
++++ linux-2.6/drivers/mtd/devices/Kconfig 2007-12-31 10:44:25.000000000 +0200
+@@ -270,5 +270,17 @@
+ LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
+ you have managed to wipe the first block.
+
+-endmenu
++config MTD_AT91_DATAFLASH
++ tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
++ depends on MTD && ARCH_AT91RM9200 && AT91_SPI
++ help
++ This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
++ If you have such a board, say 'Y'.
++
++config DATAFLASH_ALWAYS_ADD_DEVICE
++ bool "Register whole DataFlash device"
++ depends on MTD_AT91_DATAFLASH
++ help
++ Always add the whole DataFlash device when using MTD partitions.
+
++endmenu
+diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/Makefile linux-2.6/drivers/mtd/devices/Makefile
+--- linux-2.6.24/drivers/mtd/devices/Makefile 2008-03-01 22:02:12.000000000 +0200
++++ linux-2.6/drivers/mtd/devices/Makefile 2007-12-31 10:48:27.000000000 +0200
+@@ -17,3 +17,4 @@
+ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
+ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
+ obj-$(CONFIG_MTD_M25P80) += m25p80.o
++obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
+diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/at91_dataflash.c linux-2.6/drivers/mtd/devices/at91_dataflash.c
+--- linux-2.6.24/drivers/mtd/devices/at91_dataflash.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/drivers/mtd/devices/at91_dataflash.c 2007-12-31 15:18:43.000000000 +0200
+@@ -0,0 +1,673 @@
++/*
++ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
++ *
++ * Copyright (C) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++*/
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/pci.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/mach-types.h>
++
++#include <asm/arch/spi.h>
++
++
++#undef DEBUG_DATAFLASH
++
++#define DATAFLASH_MAX_DEVICES 4 /* max number of dataflash devices */
++
++#define OP_READ_CONTINUOUS 0xE8
++#define OP_READ_PAGE 0xD2
++#define OP_READ_BUFFER1 0xD4
++#define OP_READ_BUFFER2 0xD6
++#define OP_READ_STATUS 0xD7
++
++#define OP_ERASE_PAGE 0x81
++#define OP_ERASE_BLOCK 0x50
++
++#define OP_TRANSFER_BUF1 0x53
++#define OP_TRANSFER_BUF2 0x55
++#define OP_COMPARE_BUF1 0x60
++#define OP_COMPARE_BUF2 0x61
++
++#define OP_PROGRAM_VIA_BUF1 0x82
++#define OP_PROGRAM_VIA_BUF2 0x85
++
++struct dataflash_local
++{
++ int spi; /* SPI chip-select number */
++
++ unsigned int page_size; /* number of bytes per page */
++ unsigned short page_offset; /* page offset in flash address */
++};
++
++
++/* Detected DataFlash devices */
++static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
++static int nr_devices = 0;
++
++/* ......................................................................... */
++
++#ifdef CONFIG_MTD_PARTITIONS
++
++static struct mtd_partition static_partitions_2M[] =
++{
++ {
++ .name = "bootloader",
++ .offset = 0,
++ .size = 1 * 32 * 8 * 528, /* 1st sector = 32 blocks * 8 pages * 528 bytes */
++ .mask_flags = MTD_WRITEABLE, /* read-only */
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 6 * 32 * 8 * 528, /* 6 sectors */
++ },
++ {
++ .name = "filesystem",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL, /* rest = 9 sectors */
++ }
++};
++
++static struct mtd_partition static_partitions_4M[] =
++{
++ {
++ .name = "bootloader",
++ .offset = 0,
++ .size = 1 * 64 * 8 * 528, /* 1st sector = 64 blocks * 8 pages * 528 bytes */
++ .mask_flags = MTD_WRITEABLE, /* read-only */
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 4 * 64 * 8 * 528, /* 4 sectors */
++ },
++ {
++ .name = "filesystem",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL, /* rest = 11 sectors */
++ }
++};
++
++#if defined(CONFIG_MACH_KAFA)
++static struct mtd_partition static_partitions_8M[] =
++{
++ {
++ name: "romboot",
++ offset: 0,
++ size: 16 * 1056, /* 160 Kb */
++ mask_flags: MTD_WRITEABLE, /* read-only */
++ },
++ {
++ name: "uboot",
++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++ size: 128 * 1056, /* 1 MB */
++ },
++ {
++ name: "kernel",
++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++ size: 1024 * 1056, /* 1 MB */
++ },
++ {
++ name: "filesystem",
++ offset: MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
++ size: MTDPART_SIZ_FULL,
++ }
++};
++
++#elif defined(CONFIG_MACH_MULTMDP)
++
++static struct mtd_partition static_partitions_8M[] =
++{
++ {
++ .name = "bootloader",
++ .offset = 0,
++ .size = 12 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
++ .mask_flags = MTD_WRITEABLE, /* read-only */
++ },
++ {
++ .name = "configuration",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 20 * 1056,
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 1520 * 1056,
++ },
++ {
++ .name = "filesystem",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL,
++ }
++};
++
++#else
++
++static struct mtd_partition static_partitions_8M[] =
++{
++ {
++ .name = "bootloader",
++ .offset = 0,
++ .size = 1 * 32 * 8 * 1056, /* 1st sector = 32 blocks * 8 pages * 1056 bytes */
++ .mask_flags = MTD_WRITEABLE, /* read-only */
++ },
++ {
++ .name = "kernel",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = 5 * 32 * 8 * 1056, /* 5 sectors */
++ },
++ {
++ .name = "filesystem",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL, /* rest = 26 sectors */
++ }
++};
++#endif
++
++static const char *part_probes[] = { "cmdlinepart", NULL, };
++
++#endif
++
++/* ......................................................................... */
++
++/* Allocate a single SPI transfer descriptor. We're assuming that if multiple
++ SPI transfers occur at the same time, spi_access_bus() will serialize them.
++ If this is not valid, then either (i) each dataflash 'priv' structure
++ needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
++ another mechanism. */
++static struct spi_transfer_list* spi_transfer_desc;
++
++/*
++ * Perform a SPI transfer to access the DataFlash device.
++ */
++static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
++ char* txnext, int txnext_len, char* rxnext, int rxnext_len)
++{
++ struct spi_transfer_list* list = spi_transfer_desc;
++
++ list->tx[0] = tx; list->txlen[0] = tx_len;
++ list->rx[0] = rx; list->rxlen[0] = rx_len;
++
++ list->tx[1] = txnext; list->txlen[1] = txnext_len;
++ list->rx[1] = rxnext; list->rxlen[1] = rxnext_len;
++
++ list->nr_transfers = nr;
++
++ return spi_transfer(list);
++}
++
++/* ......................................................................... */
++
++/*
++ * Poll the DataFlash device until it is READY.
++ */
++static void at91_dataflash_waitready(void)
++{
++ char* command = kmalloc(2, GFP_KERNEL);
++
++ if (!command)
++ return;
++
++ do {
++ command[0] = OP_READ_STATUS;
++ command[1] = 0;
++
++ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
++ } while ((command[1] & 0x80) == 0);
++
++ kfree(command);
++}
++
++/*
++ * Return the status of the DataFlash device.
++ */
++static unsigned short at91_dataflash_status(void)
++{
++ unsigned short status;
++ char* command = kmalloc(2, GFP_KERNEL);
++
++ if (!command)
++ return 0;
++
++ command[0] = OP_READ_STATUS;
++ command[1] = 0;
++
++ do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
++ status = command[1];
++
++ kfree(command);
++ return status;
++}
++
++/* ......................................................................... */
++
++/*
++ * Erase blocks of flash.
++ */
++static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
++{
++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++ unsigned int pageaddr;
++ char* command;
++
++#ifdef DEBUG_DATAFLASH
++ printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
++#endif
++
++ /* Sanity checks */
++ if (instr->addr + instr->len > mtd->size)
++ return -EINVAL;
++ if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
++ return -EINVAL;
++ if ((instr->addr % priv->page_size) != 0)
++ return -EINVAL;
++
++ command = kmalloc(4, GFP_KERNEL);
++ if (!command)
++ return -ENOMEM;
++
++ while (instr->len > 0) {
++ /* Calculate flash page address */
++ pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
++
++ command[0] = OP_ERASE_PAGE;
++ command[1] = (pageaddr & 0x00FF0000) >> 16;
++ command[2] = (pageaddr & 0x0000FF00) >> 8;
++ command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++ printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
++#endif
++
++ /* Send command to SPI device */
++ spi_access_bus(priv->spi);
++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++
++ at91_dataflash_waitready(); /* poll status until ready */
++ spi_release_bus(priv->spi);
++
++ instr->addr += priv->page_size; /* next page */
++ instr->len -= priv->page_size;
++ }
++
++ kfree(command);
++
++ /* Inform MTD subsystem that erase is complete */
++ instr->state = MTD_ERASE_DONE;
++ if (instr->callback)
++ instr->callback(instr);
++
++ return 0;
++}
++
++/*
++ * Read from the DataFlash device.
++ * from : Start offset in flash device
++ * len : Amount to read
++ * retlen : About of data actually read
++ * buf : Buffer containing the data
++ */
++static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++{
++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++ unsigned int addr;
++ char* command;
++
++#ifdef DEBUG_DATAFLASH
++ printk("dataflash_read: %lli .. %lli\n", from, from+len);
++#endif
++
++ *retlen = 0;
++
++ /* Sanity checks */
++ if (!len)
++ return 0;
++ if (from + len > mtd->size)
++ return -EINVAL;
++
++ /* Calculate flash page/byte address */
++ addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
++
++ command = kmalloc(8, GFP_KERNEL);
++ if (!command)
++ return -ENOMEM;
++
++ command[0] = OP_READ_CONTINUOUS;
++ command[1] = (addr & 0x00FF0000) >> 16;
++ command[2] = (addr & 0x0000FF00) >> 8;
++ command[3] = (addr & 0x000000FF);
++#ifdef DEBUG_DATAFLASH
++ printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++
++ /* Send command to SPI device */
++ spi_access_bus(priv->spi);
++ do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
++ spi_release_bus(priv->spi);
++
++ *retlen = len;
++ kfree(command);
++ return 0;
++}
++
++/*
++ * Write to the DataFlash device.
++ * to : Start offset in flash device
++ * len : Amount to write
++ * retlen : Amount of data actually written
++ * buf : Buffer containing the data
++ */
++static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
++{
++ struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
++ unsigned int pageaddr, addr, offset, writelen;
++ size_t remaining;
++ u_char *writebuf;
++ unsigned short status;
++ int res = 0;
++ char* command;
++ char* tmpbuf = NULL;
++
++#ifdef DEBUG_DATAFLASH
++ printk("dataflash_write: %lli .. %lli\n", to, to+len);
++#endif
++
++ *retlen = 0;
++
++ /* Sanity checks */
++ if (!len)
++ return 0;
++ if (to + len > mtd->size)
++ return -EINVAL;
++
++ command = kmalloc(4, GFP_KERNEL);
++ if (!command)
++ return -ENOMEM;
++
++ pageaddr = ((unsigned)to / priv->page_size);
++ offset = ((unsigned)to % priv->page_size);
++ if (offset + len > priv->page_size)
++ writelen = priv->page_size - offset;
++ else
++ writelen = len;
++ writebuf = (u_char *)buf;
++ remaining = len;
++
++ /* Allocate temporary buffer */
++ tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
++ if (!tmpbuf) {
++ kfree(command);
++ return -ENOMEM;
++ }
++
++ /* Gain access to the SPI bus */
++ spi_access_bus(priv->spi);
++
++ while (remaining > 0) {
++#ifdef DEBUG_DATAFLASH
++ printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
++#endif
++
++ /* (1) Transfer to Buffer1 */
++ if (writelen != priv->page_size) {
++ addr = pageaddr << priv->page_offset;
++ command[0] = OP_TRANSFER_BUF1;
++ command[1] = (addr & 0x00FF0000) >> 16;
++ command[2] = (addr & 0x0000FF00) >> 8;
++ command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++ printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++ at91_dataflash_waitready();
++ }
++
++ /* (2) Program via Buffer1 */
++ addr = (pageaddr << priv->page_offset) + offset;
++ command[0] = OP_PROGRAM_VIA_BUF1;
++ command[1] = (addr & 0x00FF0000) >> 16;
++ command[2] = (addr & 0x0000FF00) >> 8;
++ command[3] = (addr & 0x000000FF);
++#ifdef DEBUG_DATAFLASH
++ printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++ do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
++ at91_dataflash_waitready();
++
++ /* (3) Compare to Buffer1 */
++ addr = pageaddr << priv->page_offset;
++ command[0] = OP_COMPARE_BUF1;
++ command[1] = (addr & 0x00FF0000) >> 16;
++ command[2] = (addr & 0x0000FF00) >> 8;
++ command[3] = 0;
++#ifdef DEBUG_DATAFLASH
++ printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
++#endif
++ do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
++ at91_dataflash_waitready();
++
++ /* Get result of the compare operation */
++ status = at91_dataflash_status();
++ if (status & 0x40) {
++ printk("at91_dataflash: Write error on page %i\n", pageaddr);
++ remaining = 0;
++ writelen = 0;
++ res = -EIO;
++ }
++
++ remaining = remaining - writelen;
++ pageaddr++;
++ offset = 0;
++ writebuf += writelen;
++ *retlen += writelen;
++
++ if (remaining > priv->page_size)
++ writelen = priv->page_size;
++ else
++ writelen = remaining;
++ }
++
++ /* Release SPI bus */
++ spi_release_bus(priv->spi);
++
++ kfree(tmpbuf);
++ kfree(command);
++ return res;
++}
++
++/* ......................................................................... */
++
++/*
++ * Initialize and register DataFlash device with MTD subsystem.
++ */
++static int __init add_dataflash(int channel, char *name, int IDsize,
++ int nr_pages, int pagesize, int pageoffset)
++{
++ struct mtd_info *device;
++ struct dataflash_local *priv;
++#ifdef CONFIG_MTD_PARTITIONS
++ struct mtd_partition *mtd_parts = 0;
++ int mtd_parts_nr = 0;
++#endif
++
++ if (nr_devices >= DATAFLASH_MAX_DEVICES) {
++ printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
++ return 0;
++ }
++
++ device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
++ if (!device)
++ return -ENOMEM;
++ memset(device, 0, sizeof(struct mtd_info));
++
++ device->name = (char *)&device[1];
++ sprintf(device->name, "%s.spi%d", name, channel);
++ device->size = nr_pages * pagesize;
++ device->erasesize = pagesize;
++ device->writesize = pagesize;
++ device->owner = THIS_MODULE;
++ device->type = MTD_DATAFLASH;
++ device->flags = MTD_WRITEABLE;
++ device->erase = at91_dataflash_erase;
++ device->read = at91_dataflash_read;
++ device->write = at91_dataflash_write;
++
++ priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
++ if (!priv) {
++ kfree(device);
++ return -ENOMEM;
++ }
++ memset(priv, 0, sizeof(struct dataflash_local));
++
++ priv->spi = channel;
++ priv->page_size = pagesize;
++ priv->page_offset = pageoffset;
++ device->priv = priv;
++
++ mtd_devices[nr_devices] = device;
++ nr_devices++;
++ printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
++
++#ifdef CONFIG_MTD_PARTITIONS
++#ifdef CONFIG_MTD_CMDLINE_PARTS
++ mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
++#endif
++ if (mtd_parts_nr <= 0) {
++ switch (IDsize) {
++ case SZ_2M:
++ mtd_parts = static_partitions_2M;
++ mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
++ break;
++ case SZ_4M:
++ mtd_parts = static_partitions_4M;
++ mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
++ break;
++ case SZ_8M:
++ mtd_parts = static_partitions_8M;
++ mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
++ break;
++ }
++ }
++
++ if (mtd_parts_nr > 0) {
++#ifdef CONFIG_DATAFLASH_ALWAYS_ADD_DEVICE
++ add_mtd_device(device);
++#endif
++ return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
++ }
++#endif
++ return add_mtd_device(device); /* add whole device */
++}
++
++/*
++ * Detect and initialize DataFlash device connected to specified SPI channel.
++ *
++ * Device Density ID code Nr Pages Page Size Page offset
++ * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9
++ * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9
++ * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9
++ * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9
++ * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10
++ * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10
++ * AT45DB0642 64Mbit (8M) xx1111xx (0x3c) 8192 1056 11
++ * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
++ */
++static int __init at91_dataflash_detect(int channel)
++{
++ int res = 0;
++ unsigned short status;
++
++ spi_access_bus(channel);
++ status = at91_dataflash_status();
++ spi_release_bus(channel);
++ if (status != 0xff) { /* no dataflash device there */
++ switch (status & 0x3c) {
++ case 0x0c: /* 0 0 1 1 */
++ res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
++ break;
++ case 0x14: /* 0 1 0 1 */
++ res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
++ break;
++ case 0x1c: /* 0 1 1 1 */
++ res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
++ break;
++ case 0x24: /* 1 0 0 1 */
++ res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
++ break;
++ case 0x2c: /* 1 0 1 1 */
++ res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
++ break;
++ case 0x34: /* 1 1 0 1 */
++ res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
++ break;
++ case 0x3c: /* 1 1 1 1 */
++ res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
++ break;
++// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
++// case 0x10: /* 0 1 0 0 */
++// res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
++// break;
++ default:
++ printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
++ }
++ }
++
++ return res;
++}
++
++static int __init at91_dataflash_init(void)
++{
++ spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
++ if (!spi_transfer_desc)
++ return -ENOMEM;
++
++ /* DataFlash (SPI chip select 0) */
++ at91_dataflash_detect(0);
++
++ if (machine_is_sweda_tms())
++ at91_dataflash_detect(1); /* DataFlash device (SPI chip select 1) */
++
++#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
++ /* DataFlash card (SPI chip select 3) */
++ at91_dataflash_detect(3);
++#endif
++
++ return 0;
++}
++
++static void __exit at91_dataflash_exit(void)
++{
++ int i;
++
++ for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
++ if (mtd_devices[i]) {
++#ifdef CONFIG_MTD_PARTITIONS
++ del_mtd_partitions(mtd_devices[i]);
++#else
++ del_mtd_device(mtd_devices[i]);
++#endif
++ kfree(mtd_devices[i]->priv);
++ kfree(mtd_devices[i]);
++ }
++ }
++ nr_devices = 0;
++ kfree(spi_transfer_desc);
++}
++
++
++module_init(at91_dataflash_init);
++module_exit(at91_dataflash_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andrew Victor");
++MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
+diff -urN -x CVS linux-2.6.24/drivers/mtd/devices/mtd_dataflash.c linux-2.6/drivers/mtd/devices/mtd_dataflash.c
+--- linux-2.6.24/drivers/mtd/devices/mtd_dataflash.c 2008-03-01 22:02:12.000000000 +0200
++++ linux-2.6/drivers/mtd/devices/mtd_dataflash.c 2007-12-31 10:44:31.000000000 +0200
+@@ -420,7 +420,7 @@
+ status = dataflash_waitready(priv->spi);
+
+ /* Check result of the compare operation */
+- if ((status & (1 << 6)) == 1) {
++ if (status & (1 << 6)) {
+ printk(KERN_ERR "%s: compare page %u, err %d\n",
+ spi->dev.bus_id, pageaddr, status);
+ remaining = 0;
+diff -urN -x CVS linux-2.6.24/drivers/mtd/nand/Kconfig linux-2.6/drivers/mtd/nand/Kconfig
+--- linux-2.6.24/drivers/mtd/nand/Kconfig 2008-03-01 22:02:12.000000000 +0200
++++ linux-2.6/drivers/mtd/nand/Kconfig 2008-03-04 21:14:54.000000000 +0200
+@@ -279,6 +279,47 @@
+ Enables support for NAND Flash / Smart Media Card interface
+ on Atmel AT91 processors.
+
++choice
++ prompt "ECC management for NAND Flash / SmartMedia on AT91"
++ depends on MTD_NAND_AT91
++
++config MTD_NAND_AT91_ECC_SOFT
++ bool "Software ECC"
++ depends on MTD_NAND_AT91
++ help
++ Uses software ECC.
++
++ NB : hardware and software ECC schemes are incompatible.
++ If you switch from one to another, you'll have to erase your
++ mtd partition.
++
++config MTD_NAND_AT91_ECC_HW
++ bool "Hardware ECC"
++ depends on MTD_NAND_AT91 && (ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9)
++ help
++ Uses hardware ECC provided by the AT91 processor
++ instead of software ECC.
++ The hardware ECC controller is capable of single bit error
++ correction and 2-bit random detection per page.
++
++ NB : hardware and software ECC schemes are incompatible.
++ If you switch from one to another, you'll have to erase your
++ mtd partition.
++
++ If unsure, say Y
++
++config MTD_NAND_AT91_ECC_NONE
++ bool "No ECC (Testing Only)"
++ depends on MTD_NAND_AT91
++ help
++ No ECC will be used.
++ It's not a good idea and it should be reserved for testing
++ purpose only.
++
++ If unsure, say N
++
++endchoice
++
+ config MTD_NAND_CM_X270
+ tristate "Support for NAND Flash on CM-X270 modules"
+ depends on MTD_NAND && MACH_ARMCORE
+diff -urN -x CVS linux-2.6.24/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd/nand/at91_nand.c
+--- linux-2.6.24/drivers/mtd/nand/at91_nand.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/drivers/mtd/nand/at91_nand.c 2008-03-04 21:41:16.000000000 +0200
+@@ -9,6 +9,15 @@
+ * Derived from drivers/mtd/spia.c
+ * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
+ *
++ *
++ * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
++ * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
++ *
++ * Derived from Das U-Boot source code
++ * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
++ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
++ *
++ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+@@ -28,12 +37,54 @@
+ #include <asm/hardware.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/gpio.h>
++#include <asm/arch/at91_ecc.h>
++
++#ifdef CONFIG_MTD_NAND_AT91_ECC_HW
++#define hard_ecc 1
++#else
++#define hard_ecc 0
++#endif
++
++#ifdef CONFIG_MTD_NAND_AT91_ECC_NONE
++#define no_ecc 1
++#else
++#define no_ecc 0
++#endif
++
++/* Register access macros */
++#define ecc_readl(base, reg) __raw_readl(base + reg)
++#define ecc_writel(base, reg, value) __raw_writel((value), base + reg)
++
++
++/*
++ * OOB layout for large page size.
++ * bad block info is on bytes 0 and 1
++ * the bytes must be consecutives to avoid several NAND_CMD_RNDOUT during read.
++ */
++static struct nand_ecclayout at91_oobinfo_large = {
++ .eccbytes = 4,
++ .eccpos = {60, 61, 62, 63},
++ .oobfree = { {2, 58} },
++};
++
++/*
++ * OOB layout for small page size
++ * bad block info is on bytes 4 and 5
++ * the bytes must be consecutives to avoid several NAND_CMD_RNDOUT during read.
++ */
++static struct nand_ecclayout at91_oobinfo_small = {
++ .eccbytes = 4,
++ .eccpos = {0, 1, 2, 3},
++ .oobfree = { {6, 10} },
++};
+
+ struct at91_nand_host {
+ struct nand_chip nand_chip;
+ struct mtd_info mtd;
+ void __iomem *io_base;
+ struct at91_nand_data *board;
++ struct device *dev;
++ void __iomem *ecc;
+ };
+
+ /*
+@@ -82,10 +133,250 @@
+ at91_set_gpio_value(host->board->enable_pin, 1);
+ }
+
++/*
++ * write oob for small pages
++ */
++static int at91_nand_write_oob_512(struct mtd_info *mtd,
++ struct nand_chip *chip, int page)
++{
++ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
++ int eccsize = chip->ecc.size, length = mtd->oobsize;
++ int len, pos, status = 0;
++ const uint8_t *bufpoi = chip->oob_poi;
++
++ pos = eccsize + chunk;
++
++ chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
++ len = min_t(int, length, chunk);
++ chip->write_buf(mtd, bufpoi, len);
++ bufpoi += len;
++ length -= len;
++ if (length > 0)
++ chip->write_buf(mtd, bufpoi, length);
++
++ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
++ status = chip->waitfunc(mtd, chip);
++
++ return status & NAND_STATUS_FAIL ? -EIO : 0;
++
++}
++
++/*
++ * read oob for small pages
++ */
++static int at91_nand_read_oob_512(struct mtd_info *mtd,
++ struct nand_chip *chip, int page, int sndcmd)
++{
++ if (sndcmd) {
++ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
++ sndcmd = 0;
++ }
++ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++ return sndcmd;
++}
++
++/*
++ * Calculate HW ECC
++ *
++ * mtd: MTD block structure
++ * dat: raw data (unused)
++ * ecc_code: buffer for ECC
++ */
++static int at91_nand_calculate(struct mtd_info *mtd,
++ const u_char *dat, unsigned char *ecc_code)
++{
++ struct nand_chip *nand_chip = mtd->priv;
++ struct at91_nand_host *host = nand_chip->priv;
++ uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
++ unsigned int ecc_value;
++
++ /* get the first 2 ECC bytes */
++ ecc_value = ecc_readl(host->ecc, AT91_ECC_PR) & (AT91_ECC_BITADDR | AT91_ECC_WORDADDR);
++
++ ecc_code[eccpos[0]] = ecc_value & 0xFF;
++ ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
++
++ /* get the last 2 ECC bytes */
++ ecc_value = ecc_readl(host->ecc, AT91_ECC_NPR) & AT91_ECC_NPARITY;
++
++ ecc_code[eccpos[2]] = ecc_value & 0xFF;
++ ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
++
++ return 0;
++}
++
++/*
++ * HW ECC read page function
++ *
++ * mtd: mtd info structure
++ * chip: nand chip info structure
++ * buf: buffer to store read data
++ */
++static int at91_nand_read_page(struct mtd_info *mtd,
++ struct nand_chip *chip, uint8_t *buf)
++{
++ int eccsize = chip->ecc.size;
++ int eccbytes = chip->ecc.bytes;
++ uint32_t *eccpos = chip->ecc.layout->eccpos;
++ uint8_t *p = buf;
++ uint8_t *oob = chip->oob_poi;
++ uint8_t *ecc_pos;
++ int stat;
++
++ /* read the page */
++ chip->read_buf(mtd, p, eccsize);
++
++ /* move to ECC position if needed */
++ if (eccpos[0] != 0) {
++ /*
++ * This only works on large pages because the ECC controller
++ * waits for NAND_CMD_RNDOUTSTART after the NAND_CMD_RNDOUT.
++ * Anyway, for small pages, the eccpos[0] == 0
++ */
++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
++ mtd->writesize + eccpos[0], -1);
++ }
++
++ /* the ECC controller needs to read the ECC just after the data */
++ ecc_pos = oob + eccpos[0];
++ chip->read_buf(mtd, ecc_pos, eccbytes);
++
++ /* check if there's an error */
++ stat = chip->ecc.correct(mtd, p, oob, NULL);
++
++ if (stat < 0)
++ mtd->ecc_stats.failed++;
++ else
++ mtd->ecc_stats.corrected += stat;
++
++ /* get back to oob start (end of page) */
++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
++
++ /* read the oob */
++ chip->read_buf(mtd, oob, mtd->oobsize);
++
++ return 0;
++}
++
++/*
++ * HW ECC Correction
++ *
++ * mtd: MTD block structure
++ * dat: raw data read from the chip
++ * read_ecc: ECC from the chip (unused)
++ * isnull: unused
++ *
++ * Detect and correct a 1 bit error for a page
++ */
++static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
++ u_char *read_ecc, u_char *isnull)
++{
++ struct nand_chip *nand_chip = mtd->priv;
++ struct at91_nand_host *host = nand_chip->priv;
++ unsigned int ecc_status;
++ unsigned int ecc_word, ecc_bit;
++
++ /* get the status from the Status Register */
++ ecc_status = ecc_readl(host->ecc, AT91_ECC_SR);
++
++ /* if there's no error */
++ if (likely(!(ecc_status & AT91_ECC_RECERR)))
++ return 0;
++
++ /* get error bit offset (4 bits) */
++ ecc_bit = ecc_readl(host->ecc, AT91_ECC_PR) & AT91_ECC_BITADDR;
++ /* get word address (12 bits) */
++ ecc_word = ecc_readl(host->ecc, AT91_ECC_PR) & AT91_ECC_WORDADDR;
++ ecc_word >>= 4;
++
++ /* if there are multiple errors */
++ if (ecc_status & AT91_ECC_MULERR) {
++ /* Check if it is a freshly erased block (filled with 0xff) */
++ if ((ecc_bit == AT91_ECC_BITADDR)
++ && (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
++ /* the block has just been erased, return OK */
++ return 0;
++ }
++ /*
++ * It doesn't seems to be a freshly-erased block.
++ * We can't correct so many errors.
++ */
++ dev_dbg(host->dev, "at91_nand : multiple errors detected."
++ " Unable to correct.\n");
++ return -EIO;
++ }
++
++ /* if there's a single bit error : we can correct it */
++ if (ecc_status & AT91_ECC_ECCERR) {
++ /*
++ * There's nothing much to do here.
++ * The bit error is on the ECC itself.
++ */
++ dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
++ " Nothing to correct\n");
++ return 0;
++ }
++
++ dev_dbg(host->dev, "at91_nand : one bit error on data."
++ " (word offset in the page :"
++ " 0x%x bit offset : 0x%x)\n",
++ ecc_word, ecc_bit);
++ /* correct the error */
++ if (nand_chip->options & NAND_BUSWIDTH_16) {
++ /* 16 bits words */
++ ((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
++ } else {
++ /* 8 bits words */
++ dat[ecc_word] ^= (1 << ecc_bit);
++ }
++ dev_dbg(host->dev, "at91_nand : error corrected\n");
++ return 1;
++}
++
++/*
++ * Enable HW ECC : unsused
++ */
++static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
++
++/*
++ * Over-ride the standard functions with our optimized versions.
++ * We can use read/write blocks to move data to/from the controller.
++ */
++static void at91_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
++{
++ struct nand_chip *nand_chip = mtd->priv;
++
++ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
++}
++
++static void at91_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
++{
++ struct nand_chip *nand_chip = mtd->priv;
++
++ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
++}
++
++static void at91_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
++{
++ struct nand_chip *nand_chip = mtd->priv;
++
++ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
++}
++
++static void at91_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
++{
++ struct nand_chip *nand_chip = mtd->priv;
++
++ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
++}
++
++
+ #ifdef CONFIG_MTD_PARTITIONS
+-const char *part_probes[] = { "cmdlinepart", NULL };
++static const char *part_probes[] = { "cmdlinepart", NULL };
+ #endif
+
++static char* ecc_modes[] __initdata = { "No", "Software", "Hardware" };
++
+ /*
+ * Probe for the NAND device.
+ */
+@@ -94,6 +385,8 @@
+ struct at91_nand_host *host;
+ struct mtd_info *mtd;
+ struct nand_chip *nand_chip;
++ struct resource *regs;
++ struct resource *mem;
+ int res;
+
+ #ifdef CONFIG_MTD_PARTITIONS
+@@ -108,8 +401,13 @@
+ return -ENOMEM;
+ }
+
+- host->io_base = ioremap(pdev->resource[0].start,
+- pdev->resource[0].end - pdev->resource[0].start + 1);
++ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!mem) {
++ printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
++ return -ENXIO;
++ }
++
++ host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
+ if (host->io_base == NULL) {
+ printk(KERN_ERR "at91_nand: ioremap failed\n");
+ kfree(host);
+@@ -119,6 +417,7 @@
+ mtd = &host->mtd;
+ nand_chip = &host->nand_chip;
+ host->board = pdev->dev.platform_data;
++ host->dev = &pdev->dev;
+
+ nand_chip->priv = host; /* link the private data structures */
+ mtd->priv = nand_chip;
+@@ -132,11 +431,40 @@
+ if (host->board->rdy_pin)
+ nand_chip->dev_ready = at91_nand_device_ready;
+
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (!regs && hard_ecc) {
++ printk(KERN_ERR "at91_nand: can't get I/O resource "
++ "regs\nFalling back on software ECC\n");
++ }
++
+ nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
++ if (no_ecc)
++ nand_chip->ecc.mode = NAND_ECC_NONE;
++ if (hard_ecc && regs) {
++ host->ecc = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
++ host->ecc += regs->start;
++
++ nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME; /* HW SYNDROME ECC */
++ nand_chip->ecc.calculate = at91_nand_calculate; /* function called after a write */
++ nand_chip->ecc.correct = at91_nand_correct; /* function called after a read */
++ nand_chip->ecc.hwctl = at91_nand_hwctl; /* unused */
++ nand_chip->ecc.read_page = at91_nand_read_page; /* read page function */
++ nand_chip->ecc.bytes = 4; /* 4 ECC bytes for any page size */
++ nand_chip->ecc.prepad = 0;
++ nand_chip->ecc.postpad = 0;
++ }
++
+ nand_chip->chip_delay = 20; /* 20us command delay time */
+
+- if (host->board->bus_width_16) /* 16-bit bus width */
++ if (host->board->bus_width_16) { /* 16-bit bus width */
+ nand_chip->options |= NAND_BUSWIDTH_16;
++ nand_chip->read_buf = at91_read_buf16;
++ nand_chip->write_buf = at91_write_buf16;
++ }
++ else {
++ nand_chip->read_buf = at91_read_buf8;
++ nand_chip->write_buf = at91_write_buf8;
++ }
+
+ platform_set_drvdata(pdev, host);
+ at91_nand_enable(host);
+@@ -149,21 +477,73 @@
+ }
+ }
+
+- /* Scan to find existance of the device */
+- if (nand_scan(mtd, 1)) {
++ /* first scan to find the device and get the page size */
++ if (nand_scan_ident(mtd, 1)) {
++ res = -ENXIO;
++ goto out;
++ }
++
++ if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
++ /* ECC is calculated for the whole page (1 step) */
++ nand_chip->ecc.size = mtd->writesize;
++
++ /* set ECC page size and oob layout */
++ switch (mtd->writesize) {
++ case 512:
++ nand_chip->ecc.layout = &at91_oobinfo_small;
++ nand_chip->ecc.read_oob = at91_nand_read_oob_512;
++ nand_chip->ecc.write_oob = at91_nand_write_oob_512;
++ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_528);
++ break;
++ case 1024:
++ nand_chip->ecc.layout = &at91_oobinfo_large;
++ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_1056);
++ break;
++ case 2048:
++ nand_chip->ecc.layout = &at91_oobinfo_large;
++ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_2112);
++ break;
++ case 4096:
++ nand_chip->ecc.layout = &at91_oobinfo_large;
++ ecc_writel(host->ecc, AT91_ECC_MR, AT91_ECC_PAGESIZE_4224);
++ break;
++ default:
++ /*
++ * Page size not supported by HW ECC.
++ * So switch back to soft ECC
++ */
++ nand_chip->ecc.mode = NAND_ECC_SOFT;
++ nand_chip->ecc.calculate = NULL;
++ nand_chip->ecc.correct = NULL;
++ nand_chip->ecc.hwctl = NULL;
++ nand_chip->ecc.read_page = NULL;
++ nand_chip->ecc.postpad = 0;
++ nand_chip->ecc.prepad = 0;
++ nand_chip->ecc.bytes = 0;
++ break;
++ }
++ }
++
++ printk(KERN_INFO "AT91 NAND: %i-bit, %s ECC\n",
++ (nand_chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
++ ecc_modes[nand_chip->ecc.mode]
++ );
++
++ /* second phase scan */
++ if (nand_scan_tail(mtd)) {
+ res = -ENXIO;
+ goto out;
+ }
+
+ #ifdef CONFIG_MTD_PARTITIONS
+- if (host->board->partition_info)
+- partitions = host->board->partition_info(mtd->size, &num_partitions);
+ #ifdef CONFIG_MTD_CMDLINE_PARTS
+- else {
+- mtd->name = "at91_nand";
+- num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
+- }
++ mtd->name = "at91_nand";
++ num_partitions = parse_mtd_partitions(mtd, part_probes,
++ &partitions, 0);
+ #endif
++ if (num_partitions <= 0 && host->board->partition_info)
++ partitions = host->board->partition_info(mtd->size,
++ &num_partitions);
+
+ if ((!partitions) || (num_partitions == 0)) {
+ printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
+@@ -179,8 +559,11 @@
+ if (!res)
+ return res;
+
++#ifdef CONFIG_MTD_PARTITIONS
+ release:
++#endif
+ nand_release(mtd);
++
+ out:
+ at91_nand_disable(host);
+ platform_set_drvdata(pdev, NULL);
+@@ -192,7 +575,7 @@
+ /*
+ * Remove a NAND device.
+ */
+-static int __devexit at91_nand_remove(struct platform_device *pdev)
++static int __exit at91_nand_remove(struct platform_device *pdev)
+ {
+ struct at91_nand_host *host = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = &host->mtd;
+@@ -208,8 +591,7 @@
+ }
+
+ static struct platform_driver at91_nand_driver = {
+- .probe = at91_nand_probe,
+- .remove = at91_nand_remove,
++ .remove = __exit_p(at91_nand_remove),
+ .driver = {
+ .name = "at91_nand",
+ .owner = THIS_MODULE,
+@@ -218,7 +600,7 @@
+
+ static int __init at91_nand_init(void)
+ {
+- return platform_driver_register(&at91_nand_driver);
++ return platform_driver_probe(&at91_nand_driver, at91_nand_probe);
+ }
+
+
+@@ -233,4 +615,4 @@
+
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Rick Bronson");
+-MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
++MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9 / AT91CAP9");
+diff -urN -x CVS linux-2.6.24/drivers/net/Kconfig linux-2.6/drivers/net/Kconfig
+--- linux-2.6.24/drivers/net/Kconfig 2008-03-01 22:02:12.000000000 +0200
++++ linux-2.6/drivers/net/Kconfig 2008-02-18 22:56:04.000000000 +0200
+@@ -212,7 +212,7 @@
+
+ config MACB
+ tristate "Atmel MACB support"
+- depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263
++ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
+ select PHYLIB
+ help
+ The Atmel MACB ethernet interface is found on many AT32 and AT91
+diff -urN -x CVS linux-2.6.24/drivers/net/arm/at91_ether.c linux-2.6/drivers/net/arm/at91_ether.c
+--- linux-2.6.24/drivers/net/arm/at91_ether.c 2008-03-01 22:02:12.000000000 +0200
++++ linux-2.6/drivers/net/arm/at91_ether.c 2008-03-04 22:17:26.000000000 +0200
+@@ -220,7 +220,7 @@
+ if (!(phy & (1 << 0)))
+ goto done;
+ }
+- else if (lp->phy_type == MII_KS8721_ID) {
++ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) {
+ read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */
+ if (!(phy & ((1 << 2) | 1)))
+ goto done;
+@@ -286,7 +286,7 @@
+ dsintr = (1 << 15) | ( 1 << 14);
+ write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
+ }
+- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
++ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) { /* for Micrel PHY */
+ dsintr = (1 << 10) | ( 1 << 8);
+ write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
+ }
+@@ -341,7 +341,7 @@
+ dsintr = ~(1 << 14);
+ write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
+ }
+- else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
++ else if ((lp->phy_type == MII_KS8721_ID) || (lp->phy_type == MII_KSZ8041_ID)) { /* for Micrel PHY */
+ read_phy(lp->phy_address, MII_TPISTATUS, &dsintr);
+ dsintr = ~((1 << 10) | (1 << 8));
+ write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
+@@ -384,7 +384,7 @@
+ /* Wait until PHY reset is complete */
+ do {
+ read_phy(lp->phy_address, MII_BMCR, &bmcr);
+- } while (!(bmcr && BMCR_RESET));
++ } while (!(bmcr & BMCR_RESET));
+
+ disable_mdi();
+ spin_unlock_irq(&lp->lock);
+@@ -978,15 +978,22 @@
+ struct net_device *dev;
+ struct at91_private *lp;
+ unsigned int val;
+- int res;
++ struct resource *res;
++ int ret;
+ DECLARE_MAC_BUF(mac);
+
+ dev = alloc_etherdev(sizeof(struct at91_private));
+ if (!dev)
+ return -ENOMEM;
+
+- dev->base_addr = AT91_VA_BASE_EMAC;
+- dev->irq = AT91RM9200_ID_EMAC;
++ /* Get I/O base address and IRQ */
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ free_netdev(dev);
++ return -ENODEV;
++ }
++ dev->base_addr = res->start;
++ dev->irq = platform_get_irq(pdev, 0);
+
+ /* Install the interrupt handler */
+ if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) {
+@@ -1043,7 +1050,9 @@
+ } else if (machine_is_csb337()) {
+ /* mix link activity status into LED2 link state */
+ write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22);
+- }
++ } else if (machine_is_ecbat91())
++ write_phy(phy_address, MII_LEDCTRL_REG, 0x156A);
++
+ disable_mdi();
+ spin_unlock_irq(&lp->lock);
+
+@@ -1058,12 +1067,12 @@
+ lp->phy_address = phy_address; /* MDI address of PHY */
+
+ /* Register the network interface */
+- res = register_netdev(dev);
+- if (res) {
++ ret = register_netdev(dev);
++ if (ret) {
+ free_irq(dev->irq, dev);
+ free_netdev(dev);
+ dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
+- return res;
++ return ret;
+ }
+
+ /* Determine current link speed */
+@@ -1101,6 +1110,8 @@
+ printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
+ else if (phy_type == MII_AC101L_ID)
+ printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
++ else if (phy_type == MII_KSZ8041_ID)
++ printk(KERN_INFO "%s: Micrel KSZ8041 PHY\n", dev->name);
+ else if (phy_type == MII_KS8721_ID)
+ printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
+ else if (phy_type == MII_T78Q21x3_ID)
+@@ -1146,6 +1157,7 @@
+ case MII_DP83847_ID: /* National Semiconductor DP83847: */
+ case MII_DP83848_ID: /* National Semiconductor DP83848: */
+ case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
++ case MII_KSZ8041_ID: /* Micrel KSZ8041: PHY_ID1 = 0x22, PHY_ID2 = 0x1512 */
+ case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
+ case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
+ case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
+diff -urN -x CVS linux-2.6.24/drivers/net/arm/at91_ether.h linux-2.6/drivers/net/arm/at91_ether.h
+--- linux-2.6.24/drivers/net/arm/at91_ether.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/drivers/net/arm/at91_ether.h 2008-01-01 15:13:39.000000000 +0200
+@@ -48,6 +48,9 @@
+ /* Altima AC101L PHY */
+ #define MII_AC101L_ID 0x00225520
+
++/* Micrel KSZ8041 PHY */
++#define MII_KSZ8041_ID 0x00221510
++
+ /* Micrel KS8721 PHY */
+ #define MII_KS8721_ID 0x00221610
+
+diff -urN -x CVS linux-2.6.24/drivers/rtc/Kconfig linux-2.6/drivers/rtc/Kconfig
+--- linux-2.6.24/drivers/rtc/Kconfig 2008-03-01 22:02:13.000000000 +0200
++++ linux-2.6/drivers/rtc/Kconfig 2008-02-24 18:13:06.000000000 +0200
+@@ -440,10 +440,47 @@
+ AT32AP700x family processors.
+
+ config RTC_DRV_AT91RM9200
+- tristate "AT91RM9200"
+- depends on ARCH_AT91RM9200
++ tristate "AT91RM9200 or AT91SAM9RL"
++ depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL
+ help
+- Driver for the Atmel AT91RM9200's internal RTC (Realtime Clock).
++ Driver for the internal RTC (Realtime Clock) module found on
++ Atmel AT91RM9200's and AT91SAM9RL chips. On SAM9RL chips
++ this is powered by the backup power supply.
++
++config RTC_DRV_AT91SAM9
++ tristate "AT91SAM9x"
++ depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
++ help
++ RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer).
++ These timers are powered by the backup power supply (such as a
++ small coin cell battery), but do not need to be used as RTCs.
++
++ (On AT91SAM9rl chips you probably want to use the dedicated RTC
++ module and leave the RTT available for other uses.)
++
++config RTC_DRV_AT91SAM9_RTT
++ int
++ range 0 1
++ default 0
++ prompt "RTT module Number" if ARCH_AT91SAM9263
++ depends on RTC_DRV_AT91SAM9
++ help
++ More than one RTT module is available. You can choose which
++ one will be used as an RTC. The default of zero is normally
++ OK to use, though some systems use that for non-RTC purposes.
++
++config RTC_DRV_AT91SAM9_GPBR
++ int
++ range 0 3 if !ARCH_AT91SAM9263
++ range 0 15 if ARCH_AT91SAM9263
++ default 0
++ prompt "Backup Register Number"
++ depends on RTC_DRV_AT91SAM9
++ help
++ The RTC driver needs to use one of the General Purpose Backup
++ Registers (GPBRs) as well as the RTT. You can choose which one
++ will be used. The default of zero is normally OK to use, but
++ on some systems other software needs to use that register.
+
+ config RTC_DRV_BFIN
+ tristate "Blackfin On-Chip RTC"
+diff -urN -x CVS linux-2.6.24/drivers/rtc/Makefile linux-2.6/drivers/rtc/Makefile
+--- linux-2.6.24/drivers/rtc/Makefile 2008-03-01 22:02:13.000000000 +0200
++++ linux-2.6/drivers/rtc/Makefile 2007-12-31 10:44:31.000000000 +0200
+@@ -19,6 +19,7 @@
+
+ obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
+ obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
++obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
+ obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o
+ obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
+ obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o
+diff -urN -x CVS linux-2.6.24/drivers/rtc/rtc-at91rm9200.c linux-2.6/drivers/rtc/rtc-at91rm9200.c
+--- linux-2.6.24/drivers/rtc/rtc-at91rm9200.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/drivers/rtc/rtc-at91rm9200.c 2008-02-25 22:32:47.000000000 +0200
+@@ -307,12 +307,6 @@
+ return ret;
+ }
+
+- /* cpu init code should really have flagged this device as
+- * being wake-capable; if it didn't, do that here.
+- */
+- if (!device_can_wakeup(&pdev->dev))
+- device_init_wakeup(&pdev->dev, 1);
+-
+ rtc = rtc_device_register(pdev->name, &pdev->dev,
+ &at91_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+diff -urN -x CVS linux-2.6.24/drivers/rtc/rtc-at91sam9.c linux-2.6/drivers/rtc/rtc-at91sam9.c
+--- linux-2.6.24/drivers/rtc/rtc-at91sam9.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/drivers/rtc/rtc-at91sam9.c 2008-03-01 21:54:39.000000000 +0200
+@@ -0,0 +1,526 @@
++/*
++ * "RTT as Real Time Clock" driver for AT91SAM9 SoC family
++ *
++ * (C) 2007 Michel Benoit
++ *
++ * Based on rtc-at91rm9200.c by Rick Bronson
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/time.h>
++#include <linux/rtc.h>
++#include <linux/interrupt.h>
++#include <linux/ioctl.h>
++
++#include <asm/mach/time.h>
++#include <asm/arch/board.h>
++#include <asm/arch/at91_rtt.h>
++
++
++/*
++ * This driver uses two configurable hardware resources that live in the
++ * AT91SAM9 backup power domain (intended to be powered at all times)
++ * to implement the Real Time Clock interfaces
++ *
++ * - A "Real-time Timer" (RTT) counts up in seconds from a base time.
++ * We can't assign the counter value (CRTV) ... but we can reset it.
++ *
++ * - One of the "General Purpose Backup Registers" (GPBRs) holds the
++ * base time, normally an offset from the beginning of the POSIX
++ * epoch (1970-Jan-1 00:00:00 UTC). Some systems also include the
++ * local timezone's offset.
++ *
++ * The RTC's value is the RTT counter plus that offset. The RTC's alarm
++ * is likewise a base (ALMV) plus that offset.
++ *
++ * Not all RTTs will be used as RTCs; some systems have multiple RTTs to
++ * choose from, or a "real" RTC module. All systems have multiple GPBR
++ * registers available, likewise usable for more than "RTC" support.
++ */
++
++/*
++ * We store ALARM_DISABLED in ALMV to record that no alarm is set.
++ * It's also the reset value for that field.
++ */
++#define ALARM_DISABLED ((u32)~0)
++
++
++struct sam9_rtc {
++ void __iomem *rtt;
++ struct rtc_device *rtcdev;
++ u32 imr;
++};
++
++#define rtt_readl(rtc, field) \
++ __raw_readl((rtc)->rtt + AT91_RTT_ ## field)
++#define rtt_writel(rtc, field, val) \
++ __raw_writel((val), (rtc)->rtt + AT91_RTT_ ## field)
++
++#define gpbr_readl(rtc) \
++ at91_sys_read(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR)
++#define gpbr_writel(rtc, val) \
++ at91_sys_write(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR, (val))
++
++/*
++ * Read current time and date in RTC
++ */
++static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
++{
++ struct sam9_rtc *rtc = dev_get_drvdata(dev);
++ u32 secs, secs2;
++ u32 offset;
++
++ /* read current time offset */
++ offset = gpbr_readl(rtc);
++ if (offset == 0)
++ return -EILSEQ;
++
++ /* reread the counter to help sync the two clock domains */
++ secs = rtt_readl(rtc, VR);
++ secs2 = rtt_readl(rtc, VR);
++ if (secs != secs2)
++ secs = rtt_readl(rtc, VR);
++
++ rtc_time_to_tm(offset + secs, tm);
++
++ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime",
++ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
++ tm->tm_hour, tm->tm_min, tm->tm_sec);
++
++ return 0;
++}
++
++/*
++ * Set current time and date in RTC
++ */
++static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
++{
++ struct sam9_rtc *rtc = dev_get_drvdata(dev);
++ int err;
++ u32 offset, alarm, mr;
++ unsigned long secs;
++
++ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime",
++ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
++ tm->tm_hour, tm->tm_min, tm->tm_sec);
++
++ err = rtc_tm_to_time(tm, &secs);
++ if (err != 0)
++ return err;
++
++ mr = rtt_readl(rtc, MR);
++
++ /* disable interrupts */
++ rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
++
++ /* read current time offset */
++ offset = gpbr_readl(rtc);
++
++ /* store the new base time in a battery backup register */
++ secs += 1;
++ gpbr_writel(rtc, secs);
++
++ /* adjust the alarm time for the new base */
++ alarm = rtt_readl(rtc, AR);
++ if (alarm != ALARM_DISABLED) {
++ if (offset > secs) {
++ /* time jumped backwards, increase time until alarm */
++ alarm += (offset - secs);
++ } else if ((alarm + offset) > secs) {
++ /* time jumped forwards, decrease time until alarm */
++ alarm -= (secs - offset);
++ } else {
++ /* time jumped past the alarm, disable alarm */
++ alarm = ALARM_DISABLED;
++ mr &= ~AT91_RTT_ALMIEN;
++ }
++ rtt_writel(rtc, AR, alarm);
++ }
++
++ /* reset the timer, and re-enable interrupts */
++ rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST);
++
++ return 0;
++}
++
++/*
++ * Read alarm time and date in RTC
++ */
++static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct sam9_rtc *rtc = dev_get_drvdata(dev);
++ struct rtc_time *tm = &alrm->time;
++ u32 alarm = rtt_readl(rtc, AR);
++ u32 offset;
++
++ offset = gpbr_readl(rtc);
++ if (offset == 0)
++ return -EILSEQ;
++
++ memset(alrm, 0, sizeof(alrm));
++ if (alarm != ALARM_DISABLED && offset != 0) {
++ rtc_time_to_tm(offset + alarm, tm);
++
++ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm",
++ 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
++ tm->tm_hour, tm->tm_min, tm->tm_sec);
++
++ if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN)
++ alrm->enabled = 1;
++ }
++
++ return 0;
++}
++
++/*
++ * Set alarm time and date in RTC
++ */
++static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct sam9_rtc *rtc = dev_get_drvdata(dev);
++ struct rtc_time *tm = &alrm->time;
++ unsigned long secs;
++ u32 offset;
++ u32 mr;
++ int err;
++
++ err = rtc_tm_to_time(tm, &secs);
++ if (err != 0)
++ return err;
++
++ offset = gpbr_readl(rtc);
++ if (offset == 0) {
++ /* time is not set */
++ return -EILSEQ;
++ }
++ mr = rtt_readl(rtc, MR);
++ rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
++
++ /* alarm in the past? finish and leave disabled */
++ if (secs <= offset) {
++ rtt_writel(rtc, AR, ALARM_DISABLED);
++ return 0;
++ }
++
++ /* else set alarm and maybe enable it */
++ rtt_writel(rtc, AR, secs - offset);
++ if (alrm->enabled)
++ rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
++
++ dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm",
++ tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour,
++ tm->tm_min, tm->tm_sec);
++
++ return 0;
++}
++
++/*
++ * Handle commands from user-space
++ */
++static int at91_rtc_ioctl(struct device *dev, unsigned int cmd,
++ unsigned long arg)
++{
++ struct sam9_rtc *rtc = dev_get_drvdata(dev);
++ int ret = 0;
++ u32 mr = rtt_readl(rtc, MR);
++
++ dev_dbg(dev, "ioctl: cmd=%08x, arg=%08lx, mr %08x\n", cmd, arg, mr);
++
++ switch (cmd) {
++ case RTC_AIE_OFF: /* alarm off */
++ rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
++ break;
++ case RTC_AIE_ON: /* alarm on */
++ rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
++ break;
++ case RTC_UIE_OFF: /* update off */
++ rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
++ break;
++ case RTC_UIE_ON: /* update on */
++ rtt_writel(rtc, MR, mr | AT91_RTT_RTTINCIEN);
++ break;
++ default:
++ ret = -ENOIOCTLCMD;
++ break;
++ }
++
++ return ret;
++}
++
++/*
++ * Provide additional RTC information in /proc/driver/rtc
++ */
++static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
++{
++ struct sam9_rtc *rtc = dev_get_drvdata(dev);
++ u32 mr = mr = rtt_readl(rtc, MR);
++
++ seq_printf(seq, "update_IRQ\t: %s\n",
++ (mr & AT91_RTT_RTTINCIEN) ? "yes" : "no");
++ return 0;
++}
++
++/*
++ * IRQ handler for the RTC
++ */
++static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
++{
++ struct sam9_rtc *rtc = _rtc;
++ u32 sr, mr;
++ unsigned long events = 0;
++
++ /* Shared interrupt may be for another device. Note: reading
++ * SR clears it, so we must only read it in this irq handler!
++ */
++ mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
++ sr = rtt_readl(rtc, SR) & mr;
++ if (!sr)
++ return IRQ_NONE;
++
++ /* alarm status */
++ if (sr & AT91_RTT_ALMS)
++ events |= (RTC_AF | RTC_IRQF);
++
++ /* timer update/increment */
++ if (sr & AT91_RTT_RTTINC)
++ events |= (RTC_UF | RTC_IRQF);
++
++ rtc_update_irq(rtc->rtcdev, 1, events);
++
++ pr_debug("%s: num=%ld, events=0x%02lx\n", __FUNCTION__,
++ events >> 8, events & 0x000000FF);
++
++ return IRQ_HANDLED;
++}
++
++static const struct rtc_class_ops at91_rtc_ops = {
++ .ioctl = at91_rtc_ioctl,
++ .read_time = at91_rtc_readtime,
++ .set_time = at91_rtc_settime,
++ .read_alarm = at91_rtc_readalarm,
++ .set_alarm = at91_rtc_setalarm,
++ .proc = at91_rtc_proc,
++};
++
++/*
++ * Initialize and install RTC driver
++ */
++static int __init at91_rtc_probe(struct platform_device *pdev)
++{
++ struct resource *r;
++ struct sam9_rtc *rtc;
++ int ret;
++ u32 mr;
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!r)
++ return -ENODEV;
++
++ rtc = kzalloc(sizeof *rtc, GFP_KERNEL);
++ if (!rtc)
++ return -ENOMEM;
++
++ platform_set_drvdata(pdev, rtc);
++ rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
++ rtc->rtt += r->start;
++
++ mr = rtt_readl(rtc, MR);
++
++ /* unless RTT is counting at 1 Hz, re-initialize it */
++ if ((mr & AT91_RTT_RTPRES) != AT91_SLOW_CLOCK) {
++ mr = AT91_RTT_RTTRST | (AT91_SLOW_CLOCK & AT91_RTT_RTPRES);
++ gpbr_writel(rtc, 0);
++ }
++
++ /* disable all interrupts (same as on shutdown path) */
++ mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
++ rtt_writel(rtc, MR, mr);
++
++ rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev,
++ &at91_rtc_ops, THIS_MODULE);
++ if (IS_ERR(rtc->rtcdev)) {
++ ret = PTR_ERR(rtc->rtcdev);
++ goto fail;
++ }
++
++ /* register irq handler after we know what name we'll use */
++ ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt,
++ IRQF_DISABLED | IRQF_SHARED,
++ rtc->rtcdev->dev.bus_id, rtc);
++ if (ret) {
++ dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS);
++ rtc_device_unregister(rtc->rtcdev);
++ goto fail;
++ }
++
++ /* NOTE: sam9260 rev A silicon has a ROM bug which resets the
++ * RTT on at least some reboots. If you have that chip, you must
++ * initialize the time from some external source like a GPS, wall
++ * clock, discrete RTC, etc
++ */
++
++ if (gpbr_readl(rtc) == 0)
++ dev_warn(&pdev->dev, "%s: SET TIME!\n",
++ rtc->rtcdev->dev.bus_id);
++
++ return 0;
++
++fail:
++ platform_set_drvdata(pdev, NULL);
++ kfree(rtc);
++ return ret;
++}
++
++/*
++ * Disable and remove the RTC driver
++ */
++static int __exit at91_rtc_remove(struct platform_device *pdev)
++{
++ struct sam9_rtc *rtc = platform_get_drvdata(pdev);
++ u32 mr = rtt_readl(rtc, MR);
++
++ /* disable all interrupts */
++ rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
++ free_irq(AT91_ID_SYS, rtc);
++
++ rtc_device_unregister(rtc->rtcdev);
++
++ platform_set_drvdata(pdev, NULL);
++ kfree(rtc);
++ return 0;
++}
++
++static void at91_rtc_shutdown(struct platform_device *pdev)
++{
++ struct sam9_rtc *rtc = platform_get_drvdata(pdev);
++ u32 mr = rtt_readl(rtc, MR);
++
++ rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
++ rtt_writel(rtc, MR, mr & ~rtc->imr);
++}
++
++#ifdef CONFIG_PM
++
++/* AT91SAM9 RTC Power management control */
++
++static int at91_rtc_suspend(struct platform_device *pdev,
++ pm_message_t state)
++{
++ struct sam9_rtc *rtc = platform_get_drvdata(pdev);
++ u32 mr = rtt_readl(rtc, MR);
++
++ /*
++ * This IRQ is shared with DBGU and other hardware which isn't
++ * necessarily a wakeup event source.
++ */
++ rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
++ if (rtc->imr) {
++ if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) {
++ enable_irq_wake(AT91_ID_SYS);
++ /* don't let RTTINC cause wakeups */
++ if (mr & AT91_RTT_RTTINCIEN)
++ rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
++ } else
++ rtt_writel(rtc, MR, mr & ~rtc->imr);
++ }
++
++ return 0;
++}
++
++static int at91_rtc_resume(struct platform_device *pdev)
++{
++ struct sam9_rtc *rtc = platform_get_drvdata(pdev);
++ u32 mr;
++
++ if (rtc->imr) {
++ if (device_may_wakeup(&pdev->dev))
++ disable_irq_wake(AT91_ID_SYS);
++ mr = rtt_readl(rtc, MR);
++ rtt_writel(rtc, MR, mr | rtc->imr);
++ }
++
++ return 0;
++}
++#else
++#define at91_rtc_suspend NULL
++#define at91_rtc_resume NULL
++#endif
++
++static struct platform_driver at91_rtc_driver = {
++ .driver.name = "rtc-at91sam9",
++ .driver.owner = THIS_MODULE,
++ .remove = __exit_p(at91_rtc_remove),
++ .shutdown = at91_rtc_shutdown,
++ .suspend = at91_rtc_suspend,
++ .resume = at91_rtc_resume,
++};
++
++/* Chips can have more than one RTT module, and they can be used for more
++ * than just RTCs. So we can't just register as "the" RTT driver.
++ *
++ * A normal approach in such cases is to create a library to allocate and
++ * free the modules. Here we just use bus_find_device() as like such a
++ * library, binding directly ... no runtime "library" footprint is needed.
++ */
++static int __init at91_rtc_match(struct device *dev, void *v)
++{
++ struct platform_device *pdev = to_platform_device(dev);
++ int ret;
++
++ /* continue searching if this isn't the RTT we need */
++ if (strcmp("at91_rtt", pdev->name) != 0
++ || pdev->id != CONFIG_RTC_DRV_AT91SAM9_RTT)
++ goto fail;
++
++ /* else we found it ... but fail unless we can bind to the RTC driver */
++ if (dev->driver) {
++ dev_dbg(dev, "busy, can't use as RTC!\n");
++ goto fail;
++ }
++ dev->driver = &at91_rtc_driver.driver;
++ if (device_attach(dev) == 0) {
++ dev_dbg(dev, "can't attach RTC!\n");
++ goto fail;
++ }
++ ret = at91_rtc_probe(pdev);
++ if (ret == 0)
++ return true;
++
++ dev_dbg(dev, "RTC probe err %d!\n", ret);
++fail:
++ return false;
++}
++
++static int __init at91_rtc_init(void)
++{
++ int status;
++ struct device *rtc;
++
++ status = platform_driver_register(&at91_rtc_driver);
++ if (status)
++ return status;
++ rtc = bus_find_device(&platform_bus_type, NULL,
++ NULL, at91_rtc_match);
++ if (!rtc)
++ platform_driver_unregister(&at91_rtc_driver);
++ return rtc ? 0 : -ENODEV;
++}
++module_init(at91_rtc_init);
++
++static void __exit at91_rtc_exit(void)
++{
++ platform_driver_unregister(&at91_rtc_driver);
++}
++module_exit(at91_rtc_exit);
++
++
++MODULE_AUTHOR("Michel Benoit");
++MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x");
++MODULE_LICENSE("GPL");
+diff -urN -x CVS linux-2.6.24/drivers/serial/atmel_serial.c linux-2.6/drivers/serial/atmel_serial.c
+--- linux-2.6.24/drivers/serial/atmel_serial.c 2008-03-01 22:02:13.000000000 +0200
++++ linux-2.6/drivers/serial/atmel_serial.c 2008-02-24 19:02:50.000000000 +0200
+@@ -7,6 +7,8 @@
+ * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
++ * DMA support added by Chip Coldwell.
++ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+@@ -33,7 +35,9 @@
+ #include <linux/sysrq.h>
+ #include <linux/tty_flip.h>
+ #include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
+ #include <linux/atmel_pdc.h>
++#include <linux/atmel_serial.h>
+
+ #include <asm/io.h>
+
+@@ -45,7 +49,10 @@
+ #include <asm/arch/gpio.h>
+ #endif
+
+-#include "atmel_serial.h"
++#define SUPPORT_PDC
++#define PDC_BUFFER_SIZE (L1_CACHE_BYTES << 3)
++#warning "Revisit"
++#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
+
+ #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+ #define SUPPORT_SYSRQ
+@@ -107,6 +114,13 @@
+ static int (*atmel_open_hook)(struct uart_port *);
+ static void (*atmel_close_hook)(struct uart_port *);
+
++struct atmel_dma_buffer {
++ unsigned char *buf;
++ dma_addr_t dma_addr;
++ size_t dma_size;
++ unsigned int ofs;
++};
++
+ /*
+ * We wrap our port structure around the generic uart_port.
+ */
+@@ -115,10 +129,20 @@
+ struct clk *clk; /* uart clock */
+ unsigned short suspended; /* is port suspended? */
+ int break_active; /* break being received */
++
++ short use_dma_rx; /* enable PDC receiver */
++ short pdc_rx_idx; /* current PDC RX buffer */
++ struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
++
++ short use_dma_tx; /* enable PDC transmitter */
++ struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
+ };
+
+ static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
+
++#define PDC_RX_BUF(port) &(port)->pdc_rx[(port)->pdc_rx_idx]
++#define PDC_RX_SWITCH(port) (port)->pdc_rx_idx = !(port)->pdc_rx_idx
++
+ #ifdef SUPPORT_SYSRQ
+ static struct console atmel_console;
+ #endif
+@@ -204,7 +228,14 @@
+ */
+ static void atmel_stop_tx(struct uart_port *port)
+ {
+- UART_PUT_IDR(port, ATMEL_US_TXRDY);
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++
++ if (atmel_port->use_dma_tx) {
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
++ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ }
++ else
++ UART_PUT_IDR(port, ATMEL_US_TXRDY);
+ }
+
+ /*
+@@ -212,7 +243,19 @@
+ */
+ static void atmel_start_tx(struct uart_port *port)
+ {
+- UART_PUT_IER(port, ATMEL_US_TXRDY);
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++
++ if (atmel_port->use_dma_tx) {
++ if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
++ /* The transmitter is already running. Yes, we
++ really need this.*/
++ return;
++
++ UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
++ }
++ else
++ UART_PUT_IER(port, ATMEL_US_TXRDY);
+ }
+
+ /*
+@@ -220,7 +263,14 @@
+ */
+ static void atmel_stop_rx(struct uart_port *port)
+ {
+- UART_PUT_IDR(port, ATMEL_US_RXRDY);
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++
++ if (atmel_port->use_dma_rx) {
++ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); /* disable PDC receive */
++ UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++ }
++ else
++ UART_PUT_IDR(port, ATMEL_US_RXRDY);
+ }
+
+ /*
+@@ -243,6 +293,134 @@
+ }
+
+ /*
++ * Receive data via the PDC. A buffer has been fulled.
++ */
++static void atmel_pdc_endrx(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct tty_struct *tty = port->info->tty;
++ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
++ unsigned int count;
++
++ count = pdc->dma_size - pdc->ofs;
++ if (likely(count > 0)) {
++ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
++ tty_flip_buffer_push(tty);
++
++ port->icount.rx += count;
++ }
++
++ /* Set this buffer as the next receive buffer */
++ pdc->ofs = 0;
++ UART_PUT_RNPR(port, pdc->dma_addr);
++ UART_PUT_RNCR(port, pdc->dma_size);
++
++ /* Switch to next buffer */
++ PDC_RX_SWITCH(atmel_port); /* next PDC buffer */
++}
++
++/*
++ * Receive data via the PDC. At least one byte was received, but the
++ * buffer was not full when the inter-character timeout expired.
++ */
++static void atmel_pdc_timeout(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct tty_struct *tty = port->info->tty;
++ struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
++ /* unsigned */ int ofs, count;
++
++ ofs = UART_GET_RPR(port) - pdc->dma_addr; /* current DMA adress */
++ count = ofs - pdc->ofs;
++
++ if (likely(count > 0)) {
++ dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++ tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
++ tty_flip_buffer_push(tty);
++
++ pdc->ofs = ofs;
++ port->icount.rx += count;
++ }
++
++ /* reset the UART timeout */
++ UART_PUT_CR(port, ATMEL_US_STTTO);
++}
++
++/*
++ * Deal with parity, framing and overrun errors.
++ */
++static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
++{
++ /* clear error */
++ UART_PUT_CR(port, ATMEL_US_RSTSTA);
++
++ if (status & ATMEL_US_RXBRK) {
++ status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); /* ignore side-effect */
++ port->icount.brk++;
++ }
++ if (status & ATMEL_US_PARE)
++ port->icount.parity++;
++ if (status & ATMEL_US_FRAME)
++ port->icount.frame++;
++ if (status & ATMEL_US_OVRE)
++ port->icount.overrun++;
++}
++
++/*
++ * A transmission via the PDC is complete.
++ */
++static void atmel_pdc_endtx(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct circ_buf *xmit = &port->info->xmit;
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++
++ xmit->tail += pdc->ofs;
++ if (xmit->tail >= SERIAL_XMIT_SIZE)
++ xmit->tail -= SERIAL_XMIT_SIZE;
++
++ port->icount.tx += pdc->ofs;
++ pdc->ofs = 0;
++
++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++ uart_write_wakeup(port);
++}
++
++/*
++ * The PDC transmitter is idle, so either start the next transfer or
++ * disable the transmitter.
++ */
++static void atmel_pdc_txbufe(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++ struct circ_buf *xmit = &port->info->xmit;
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++ int count;
++
++ if (!uart_circ_empty(xmit)) {
++ /* more to transmit - setup next transfer */
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
++ dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
++
++ if (xmit->tail < xmit->head)
++ count = xmit->head - xmit->tail;
++ else
++ count = SERIAL_XMIT_SIZE - xmit->tail;
++ pdc->ofs = count;
++
++ UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
++ UART_PUT_TCR(port, count);
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); /* re-enable PDC transmit */
++ }
++ else {
++ /* nothing left to transmit - disable the transmitter */
++ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); /* disable PDC transmit */
++ UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
++ }
++}
++
++/*
+ * Characters received (called from interrupt handler)
+ */
+ static void atmel_rx_chars(struct uart_port *port)
+@@ -361,6 +539,14 @@
+ status = UART_GET_CSR(port);
+ pending = status & UART_GET_IMR(port);
+ while (pending) {
++ /* PDC receive */
++ if (pending & ATMEL_US_ENDRX)
++ atmel_pdc_endrx(port);
++ if (pending & ATMEL_US_TIMEOUT)
++ atmel_pdc_timeout(port);
++ if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE))
++ atmel_pdc_rxerr(port, pending);
++
+ /* Interrupt receive */
+ if (pending & ATMEL_US_RXRDY)
+ atmel_rx_chars(port);
+@@ -385,6 +571,12 @@
+ if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
+ wake_up_interruptible(&port->info->delta_msr_wait);
+
++ /* PDC transmit */
++ if (pending & ATMEL_US_ENDTX)
++ atmel_pdc_endtx(port);
++ if (pending & ATMEL_US_TXBUFE)
++ atmel_pdc_txbufe(port);
++
+ /* Interrupt transmit */
+ if (pending & ATMEL_US_TXRDY)
+ atmel_tx_chars(port);
+@@ -403,6 +595,7 @@
+ */
+ static int atmel_startup(struct uart_port *port)
+ {
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ int retval;
+
+ /*
+@@ -422,6 +615,47 @@
+ }
+
+ /*
++ * Initialize DMA (if necessary)
++ */
++ if (atmel_port->use_dma_rx) {
++ int i;
++
++ for (i = 0; i < 2; i++) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
++
++ pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
++ if (pdc->buf == NULL) {
++ if (i != 0) {
++ dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
++ kfree(atmel_port->pdc_rx[0].buf);
++ }
++ free_irq(port->irq, port);
++ return -ENOMEM;
++ }
++ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
++ pdc->dma_size = PDC_BUFFER_SIZE;
++ pdc->ofs = 0;
++ }
++
++ atmel_port->pdc_rx_idx = 0;
++
++ UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
++ UART_PUT_RCR(port, PDC_BUFFER_SIZE);
++
++ UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
++ UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
++ }
++ if (atmel_port->use_dma_tx) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++ struct circ_buf *xmit = &port->info->xmit;
++
++ pdc->buf = xmit->buf;
++ pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE);
++ pdc->dma_size = SERIAL_XMIT_SIZE;
++ pdc->ofs = 0;
++ }
++
++ /*
+ * If there is a specific "open" function (to register
+ * control line interrupts)
+ */
+@@ -439,7 +673,15 @@
+ UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); /* enable xmit & rcvr */
+
+- UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
++ if (atmel_port->use_dma_rx) {
++ UART_PUT_RTOR(port, PDC_RX_TIMEOUT); /* set UART timeout */
++ UART_PUT_CR(port, ATMEL_US_STTTO);
++
++ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
++ UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); /* enable PDC controller */
++ }
++ else
++ UART_PUT_IER(port, ATMEL_US_RXRDY); /* enable receive only */
+
+ return 0;
+ }
+@@ -449,6 +691,33 @@
+ */
+ static void atmel_shutdown(struct uart_port *port)
+ {
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
++
++ /*
++ * Ensure everything is stopped.
++ */
++ atmel_stop_rx(port);
++ atmel_stop_tx(port);
++
++ /*
++ * Shut-down the DMA.
++ */
++ if (atmel_port->use_dma_rx) {
++ int i;
++
++ for (i = 0; i < 2; i++) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
++
++ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
++ kfree(pdc->buf);
++ }
++ }
++ if (atmel_port->use_dma_tx) {
++ struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
++
++ dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
++ }
++
+ /*
+ * Disable all interrupts, port and break condition.
+ */
+@@ -500,6 +769,7 @@
+ */
+ static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
+ {
++ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+ unsigned long flags;
+ unsigned int mode, imr, quot, baud;
+
+@@ -509,7 +779,7 @@
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+- if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
++ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
+ quot /= 8;
+ mode |= ATMEL_US_USCLKS_MCK_DIV8;
+ }
+@@ -558,6 +828,9 @@
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= ATMEL_US_RXBRK;
+
++ if (atmel_port->use_dma_rx) /* need to enable error interrupts */
++ UART_PUT_IER(port, port->read_status_mask);
++
+ /*
+ * Characters to ignore
+ */
+@@ -582,7 +855,8 @@
+ /* disable interrupts and drain transmitter */
+ imr = UART_GET_IMR(port); /* get interrupt mask */
+ UART_PUT_IDR(port, -1); /* disable all interrupts */
+- while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) { barrier(); }
++ while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
++ cpu_relax();
+
+ /* disable receiver and transmitter */
+ UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
+@@ -736,6 +1010,13 @@
+ clk_enable(atmel_port->clk);
+ port->uartclk = clk_get_rate(atmel_port->clk);
+ }
++
++#ifdef SUPPORT_PDC
++ atmel_port->use_dma_rx = data->use_dma_rx;
++ atmel_port->use_dma_tx = data->use_dma_tx;
++ if (atmel_port->use_dma_tx)
++ port->fifosize = PDC_BUFFER_SIZE;
++#endif
+ }
+
+ /*
+@@ -760,7 +1041,7 @@
+ static void atmel_console_putchar(struct uart_port *port, int ch)
+ {
+ while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
+- barrier();
++ cpu_relax();
+ UART_PUT_CHAR(port, ch);
+ }
+
+@@ -798,13 +1079,13 @@
+ {
+ unsigned int mr, quot;
+
+-// TODO: CR is a write-only register
+-// unsigned int cr;
+-//
+-// cr = UART_GET_CR(port) & (ATMEL_US_RXEN | ATMEL_US_TXEN);
+-// if (cr == (ATMEL_US_RXEN | ATMEL_US_TXEN)) {
+-// /* ok, the port was enabled */
+-// }
++ /*
++ * If the baud rate generator isn't running, the port wasn't
++ * initialized by the boot loader.
++ */
++ quot = UART_GET_BRGR(port);
++ if (!quot)
++ return;
+
+ mr = UART_GET_MR(port) & ATMEL_US_CHRL;
+ if (mr == ATMEL_US_CHRL_8)
+@@ -824,7 +1105,6 @@
+ * lower than one of those, as it would make us fall through
+ * to a much lower baud rate than we really want.
+ */
+- quot = UART_GET_BRGR(port);
+ *baud = port->uartclk / (16 * (quot - 1));
+ }
+
+@@ -912,7 +1192,8 @@
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+
+- if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
++ if (device_may_wakeup(&pdev->dev)
++ && !clk_must_disable(atmel_port->clk))
+ enable_irq_wake(port->irq);
+ else {
+ uart_suspend_port(&atmel_uart, port);
+diff -urN -x CVS linux-2.6.24/drivers/serial/atmel_serial.h linux-2.6/drivers/serial/atmel_serial.h
+--- linux-2.6.24/drivers/serial/atmel_serial.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/drivers/serial/atmel_serial.h 1970-01-01 02:00:00.000000000 +0200
+@@ -1,127 +0,0 @@
+-/*
+- * drivers/serial/atmel_serial.h
+- *
+- * Copyright (C) 2005 Ivan Kokshaysky
+- * Copyright (C) SAN People
+- *
+- * USART registers.
+- * Based on AT91RM9200 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef ATMEL_SERIAL_H
+-#define ATMEL_SERIAL_H
+-
+-#define ATMEL_US_CR 0x00 /* Control Register */
+-#define ATMEL_US_RSTRX (1 << 2) /* Reset Receiver */
+-#define ATMEL_US_RSTTX (1 << 3) /* Reset Transmitter */
+-#define ATMEL_US_RXEN (1 << 4) /* Receiver Enable */
+-#define ATMEL_US_RXDIS (1 << 5) /* Receiver Disable */
+-#define ATMEL_US_TXEN (1 << 6) /* Transmitter Enable */
+-#define ATMEL_US_TXDIS (1 << 7) /* Transmitter Disable */
+-#define ATMEL_US_RSTSTA (1 << 8) /* Reset Status Bits */
+-#define ATMEL_US_STTBRK (1 << 9) /* Start Break */
+-#define ATMEL_US_STPBRK (1 << 10) /* Stop Break */
+-#define ATMEL_US_STTTO (1 << 11) /* Start Time-out */
+-#define ATMEL_US_SENDA (1 << 12) /* Send Address */
+-#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */
+-#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */
+-#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */
+-#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */
+-#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */
+-#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */
+-#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */
+-
+-#define ATMEL_US_MR 0x04 /* Mode Register */
+-#define ATMEL_US_USMODE (0xf << 0) /* Mode of the USART */
+-#define ATMEL_US_USMODE_NORMAL 0
+-#define ATMEL_US_USMODE_RS485 1
+-#define ATMEL_US_USMODE_HWHS 2
+-#define ATMEL_US_USMODE_MODEM 3
+-#define ATMEL_US_USMODE_ISO7816_T0 4
+-#define ATMEL_US_USMODE_ISO7816_T1 6
+-#define ATMEL_US_USMODE_IRDA 8
+-#define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */
+-#define ATMEL_US_USCLKS_MCK (0 << 4)
+-#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4)
+-#define ATMEL_US_USCLKS_SCK (3 << 4)
+-#define ATMEL_US_CHRL (3 << 6) /* Character Length */
+-#define ATMEL_US_CHRL_5 (0 << 6)
+-#define ATMEL_US_CHRL_6 (1 << 6)
+-#define ATMEL_US_CHRL_7 (2 << 6)
+-#define ATMEL_US_CHRL_8 (3 << 6)
+-#define ATMEL_US_SYNC (1 << 8) /* Synchronous Mode Select */
+-#define ATMEL_US_PAR (7 << 9) /* Parity Type */
+-#define ATMEL_US_PAR_EVEN (0 << 9)
+-#define ATMEL_US_PAR_ODD (1 << 9)
+-#define ATMEL_US_PAR_SPACE (2 << 9)
+-#define ATMEL_US_PAR_MARK (3 << 9)
+-#define ATMEL_US_PAR_NONE (4 << 9)
+-#define ATMEL_US_PAR_MULTI_DROP (6 << 9)
+-#define ATMEL_US_NBSTOP (3 << 12) /* Number of Stop Bits */
+-#define ATMEL_US_NBSTOP_1 (0 << 12)
+-#define ATMEL_US_NBSTOP_1_5 (1 << 12)
+-#define ATMEL_US_NBSTOP_2 (2 << 12)
+-#define ATMEL_US_CHMODE (3 << 14) /* Channel Mode */
+-#define ATMEL_US_CHMODE_NORMAL (0 << 14)
+-#define ATMEL_US_CHMODE_ECHO (1 << 14)
+-#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14)
+-#define ATMEL_US_CHMODE_REM_LOOP (3 << 14)
+-#define ATMEL_US_MSBF (1 << 16) /* Bit Order */
+-#define ATMEL_US_MODE9 (1 << 17) /* 9-bit Character Length */
+-#define ATMEL_US_CLKO (1 << 18) /* Clock Output Select */
+-#define ATMEL_US_OVER (1 << 19) /* Oversampling Mode */
+-#define ATMEL_US_INACK (1 << 20) /* Inhibit Non Acknowledge */
+-#define ATMEL_US_DSNACK (1 << 21) /* Disable Successive NACK */
+-#define ATMEL_US_MAX_ITER (7 << 24) /* Max Iterations */
+-#define ATMEL_US_FILTER (1 << 28) /* Infrared Receive Line Filter */
+-
+-#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */
+-#define ATMEL_US_RXRDY (1 << 0) /* Receiver Ready */
+-#define ATMEL_US_TXRDY (1 << 1) /* Transmitter Ready */
+-#define ATMEL_US_RXBRK (1 << 2) /* Break Received / End of Break */
+-#define ATMEL_US_ENDRX (1 << 3) /* End of Receiver Transfer */
+-#define ATMEL_US_ENDTX (1 << 4) /* End of Transmitter Transfer */
+-#define ATMEL_US_OVRE (1 << 5) /* Overrun Error */
+-#define ATMEL_US_FRAME (1 << 6) /* Framing Error */
+-#define ATMEL_US_PARE (1 << 7) /* Parity Error */
+-#define ATMEL_US_TIMEOUT (1 << 8) /* Receiver Time-out */
+-#define ATMEL_US_TXEMPTY (1 << 9) /* Transmitter Empty */
+-#define ATMEL_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */
+-#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */
+-#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */
+-#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */
+-#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */
+-#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */
+-#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */
+-#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */
+-#define ATMEL_US_RI (1 << 20) /* RI */
+-#define ATMEL_US_DSR (1 << 21) /* DSR */
+-#define ATMEL_US_DCD (1 << 22) /* DCD */
+-#define ATMEL_US_CTS (1 << 23) /* CTS */
+-
+-#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */
+-#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */
+-#define ATMEL_US_CSR 0x14 /* Channel Status Register */
+-#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */
+-#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */
+-#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */
+-
+-#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
+-#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */
+-
+-#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */
+-#define ATMEL_US_TO (0xffff << 0) /* Time-out Value */
+-
+-#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */
+-#define ATMEL_US_TG (0xff << 0) /* Timeguard Value */
+-
+-#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */
+-#define ATMEL_US_NER 0x44 /* Number of Errors Register */
+-#define ATMEL_US_IF 0x4c /* IrDA Filter Register */
+-
+-#endif
+diff -urN -x CVS linux-2.6.24/drivers/spi/Kconfig linux-2.6/drivers/spi/Kconfig
+--- linux-2.6.24/drivers/spi/Kconfig 2008-03-01 22:02:13.000000000 +0200
++++ linux-2.6/drivers/spi/Kconfig 2007-12-31 10:44:31.000000000 +0200
+@@ -100,6 +100,15 @@
+ inexpensive battery powered microcontroller evaluation board.
+ This same cable can be used to flash new firmware.
+
++config SPI_AT91
++ tristate "AT91RM9200 Bitbang SPI Master"
++ depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
++ select SPI_BITBANG
++ help
++ This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
++ The SPI_ATMEL driver will be its replacement, using the native
++ SPI hardware and its DMA controller.
++
+ config SPI_IMX
+ tristate "Freescale iMX SPI controller"
+ depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
+diff -urN -x CVS linux-2.6.24/drivers/spi/Makefile linux-2.6/drivers/spi/Makefile
+--- linux-2.6.24/drivers/spi/Makefile 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/drivers/spi/Makefile 2007-12-31 10:44:31.000000000 +0200
+@@ -27,6 +27,7 @@
+ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
+ obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
+ obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
++obj-$(CONFIG_SPI_AT91) += spi_at91_bitbang.o
+ # ... add above this line ...
+
+ # SPI protocol drivers (device/link on bus)
+diff -urN -x CVS linux-2.6.24/drivers/spi/spi_at91_bitbang.c linux-2.6/drivers/spi/spi_at91_bitbang.c
+--- linux-2.6.24/drivers/spi/spi_at91_bitbang.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/drivers/spi/spi_at91_bitbang.c 2007-12-31 15:18:43.000000000 +0200
+@@ -0,0 +1,207 @@
++/*
++ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
++ *
++ * Copyright (C) 2006 David Brownell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++
++#include <asm/arch/gpio.h>
++
++
++/*
++ * FIXME this bitbanging version is just to help bootstrap systems until
++ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
++ * be a drop-in replacement for this one, and much faster.
++ *
++ * remember:
++ *
++ * - other at91 parts (like at91sam9) have multiple controllers
++ * and different pin muxing; this version is at91rm9200 specfic.
++ *
++ * - at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
++ *
++ * - rm9200 spi chipselects drop wrongly, so the native driver
++ * will need to use gpios much like this does.
++ *
++ * - real hardware only allows 8..16 bits per word, while this
++ * bitbanger allows 1..32 (incompatible superset).
++ *
++ * - this disregards clock parameters. with inlined gpio calls,
++ * gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
++ * than using the subroutined veresion from txrx_word().
++ *
++ * - suspend/resume and <linux/clk.h> support is missing ...
++ */
++
++#define spi_miso_bit AT91_PIN_PA0
++#define spi_mosi_bit AT91_PIN_PA1
++#define spi_sck_bit AT91_PIN_PA2
++
++struct at91_spi {
++ struct spi_bitbang bitbang;
++ struct platform_device *pdev;
++};
++
++/*----------------------------------------------------------------------*/
++
++static inline void setsck(struct spi_device *spi, int is_on)
++{
++ at91_set_gpio_value(spi_sck_bit, is_on);
++}
++
++static inline void setmosi(struct spi_device *spi, int is_on)
++{
++ at91_set_gpio_value(spi_mosi_bit, is_on);
++}
++
++static inline int getmiso(struct spi_device *spi)
++{
++ return at91_get_gpio_value(spi_miso_bit);
++}
++
++static void at91_spi_chipselect(struct spi_device *spi, int is_active)
++{
++ unsigned long cs = (unsigned long) spi->controller_data;
++
++ /* set default clock polarity */
++ if (is_active)
++ setsck(spi, spi->mode & SPI_CPOL);
++
++ /* only support active-low (default) */
++ at91_set_gpio_value(cs, !is_active);
++}
++
++/*
++ * NOTE: this is "as fast as we can"; it should be a function of
++ * the device clock ...
++ */
++#define spidelay(X) do{} while(0)
++
++#define EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
++}
++
++static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
++}
++
++static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
++}
++
++static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
++ unsigned nsecs, u32 word, u8 bits)
++{
++ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
++}
++
++/*----------------------------------------------------------------------*/
++
++static int __init at91_spi_probe(struct platform_device *pdev)
++{
++ int status;
++ struct spi_master *master;
++ struct at91_spi *at91_spi;
++
++ if (pdev->id != 0) /* SPI0 bus */
++ return -EINVAL;
++
++ master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
++ if (!master)
++ return -ENOMEM;
++
++ at91_spi = spi_master_get_devdata(master);
++ at91_spi->pdev = pdev;
++ platform_set_drvdata(pdev, at91_spi);
++
++ /* SPI and bitbang hookup */
++ master->bus_num = 0;
++ master->num_chipselect = 4;
++
++ at91_spi->bitbang.master = spi_master_get(master);
++ at91_spi->bitbang.chipselect = at91_spi_chipselect;
++ at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
++ at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
++ at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
++ at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
++
++ status = spi_bitbang_start(&at91_spi->bitbang);
++ if (status < 0)
++ (void) spi_master_put(at91_spi->bitbang.master);
++
++ return status;
++}
++
++static int __exit at91_spi_remove(struct platform_device *pdev)
++{
++ struct at91_spi *at91_spi = platform_get_drvdata(pdev);
++ int status;
++
++ /* stop() unregisters child devices too */
++ status = spi_bitbang_stop(&at91_spi->bitbang);
++ (void) spi_master_put(at91_spi->bitbang.master);
++
++ platform_set_drvdata(pdev, NULL);
++ return status;
++}
++
++static struct platform_driver at91_spi_driver = {
++ .probe = at91_spi_probe,
++ .remove = __exit_p(at91_spi_remove),
++ .driver = {
++ .name = "at91_spi",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at91_spi_init(void)
++{
++ at91_set_gpio_output(spi_sck_bit, 0);
++ at91_set_gpio_output(spi_mosi_bit, 0);
++ at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
++
++ /* register driver */
++ return platform_driver_register(&at91_spi_driver);
++}
++
++static void __exit at91_spi_exit(void)
++{
++ platform_driver_unregister(&at91_spi_driver);
++}
++
++device_initcall(at91_spi_init);
++module_exit(at91_spi_exit);
++
++MODULE_ALIAS("at91_spi.0");
++
++MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
++MODULE_AUTHOR("David Brownell");
++MODULE_LICENSE("GPL");
+diff -urN -x CVS linux-2.6.24/drivers/usb/gadget/Kconfig linux-2.6/drivers/usb/gadget/Kconfig
+--- linux-2.6.24/drivers/usb/gadget/Kconfig 2008-03-01 22:02:13.000000000 +0200
++++ linux-2.6/drivers/usb/gadget/Kconfig 2008-01-16 20:26:55.000000000 +0200
+@@ -308,7 +308,7 @@
+
+ config USB_GADGET_AT91
+ boolean "AT91 USB Device Port"
+- depends on ARCH_AT91 && !ARCH_AT91SAM9RL
++ depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
+ select USB_GADGET_SELECTED
+ help
+ Many Atmel AT91 processors (such as the AT91RM2000) have a
+diff -urN -x CVS linux-2.6.24/drivers/usb/gadget/at91_udc.c linux-2.6/drivers/usb/gadget/at91_udc.c
+--- linux-2.6.24/drivers/usb/gadget/at91_udc.c 2008-03-01 22:02:13.000000000 +0200
++++ linux-2.6/drivers/usb/gadget/at91_udc.c 2007-12-31 10:44:31.000000000 +0200
+@@ -1784,7 +1784,7 @@
+ */
+ if ((!udc->suspended && udc->addr)
+ || !wake
+- || at91_suspend_entering_slow_clock()) {
++ || clk_must_disable(udc->fclk)) {
+ pullup(udc, 0);
+ wake = 0;
+ } else
+diff -urN -x CVS linux-2.6.24/drivers/usb/host/ohci-at91.c linux-2.6/drivers/usb/host/ohci-at91.c
+--- linux-2.6.24/drivers/usb/host/ohci-at91.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/drivers/usb/host/ohci-at91.c 2007-12-31 14:05:15.000000000 +0200
+@@ -299,7 +299,7 @@
+ *
+ * REVISIT: some boards will be able to turn VBUS off...
+ */
+- if (at91_suspend_entering_slow_clock()) {
++ if (clk_must_disable(fclk)) {
+ ohci_usb_reset (ohci);
+ at91_stop_clock();
+ }
+diff -urN -x CVS linux-2.6.24/drivers/video/Kconfig linux-2.6/drivers/video/Kconfig
+--- linux-2.6.24/drivers/video/Kconfig 2008-03-01 22:02:13.000000000 +0200
++++ linux-2.6/drivers/video/Kconfig 2008-01-16 21:25:17.000000000 +0200
+@@ -876,6 +876,17 @@
+ framebuffer. Product specs at
+ <http://www.erd.epson.com/vdc/html/products.htm>.
+
++config FB_S1D15605
++ tristate "Epson S1D15605 framebuffer support"
++ depends on FB
++ default m if MACH_KB9200
++ select FB_CFB_FILLRECT
++ select FB_CFB_COPYAREA
++ select FB_CFB_IMAGEBLIT
++ help
++ Build in support for the S1D15605 Epson Research 128x64
++ LCD controller as a framebuffer.
++
+ config FB_S1D13XXX
+ tristate "Epson S1D13XXX framebuffer support"
+ depends on FB
+@@ -889,7 +900,7 @@
+
+ config FB_ATMEL
+ tristate "AT91/AT32 LCD Controller support"
+- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
++ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+diff -urN -x CVS linux-2.6.24/drivers/video/Makefile linux-2.6/drivers/video/Makefile
+--- linux-2.6.24/drivers/video/Makefile 2008-03-01 22:02:13.000000000 +0200
++++ linux-2.6/drivers/video/Makefile 2007-12-31 10:44:31.000000000 +0200
+@@ -87,7 +87,8 @@
+ obj-$(CONFIG_FB_SA1100) += sa1100fb.o
+ obj-$(CONFIG_FB_HIT) += hitfb.o
+ obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
+-obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
++obj-$(CONFIG_FB_S1D15605) += s1d15605fb.o
++obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
+ obj-$(CONFIG_FB_PVR2) += pvr2fb.o
+ obj-$(CONFIG_FB_VOODOO1) += sstfb.o
+ obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
+diff -urN -x CVS linux-2.6.24/drivers/video/atmel_lcdfb.c linux-2.6/drivers/video/atmel_lcdfb.c
+--- linux-2.6.24/drivers/video/atmel_lcdfb.c 2008-03-01 22:02:13.000000000 +0200
++++ linux-2.6/drivers/video/atmel_lcdfb.c 2008-02-25 22:42:48.000000000 +0200
+@@ -16,6 +16,7 @@
+ #include <linux/fb.h>
+ #include <linux/init.h>
+ #include <linux/delay.h>
++#include <linux/backlight.h>
+
+ #include <asm/arch/board.h>
+ #include <asm/arch/cpu.h>
+@@ -30,7 +31,7 @@
+ #define ATMEL_LCDC_CVAL_DEFAULT 0xc8
+ #define ATMEL_LCDC_DMA_BURST_LEN 8
+
+-#if defined(CONFIG_ARCH_AT91SAM9263)
++#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
+ #define ATMEL_LCDC_FIFO_SIZE 2048
+ #else
+ #define ATMEL_LCDC_FIFO_SIZE 512
+@@ -69,6 +70,107 @@
+ }
+ #endif
+
++static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
++ | ATMEL_LCDC_POL_POSITIVE
++ | ATMEL_LCDC_ENA_PWMENABLE;
++
++#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
++
++/* some bl->props field just changed */
++static int atmel_bl_update_status(struct backlight_device *bl)
++{
++ struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
++ int power = sinfo->bl_power;
++ int brightness = bl->props.brightness;
++
++ /* REVISIT there may be a meaningful difference between
++ * fb_blank and power ... there seem to be some cases
++ * this doesn't handle correctly.
++ */
++ if (bl->props.fb_blank != sinfo->bl_power)
++ power = bl->props.fb_blank;
++ else if (bl->props.power != sinfo->bl_power)
++ power = bl->props.power;
++
++ if (brightness < 0 && power == FB_BLANK_UNBLANK)
++ brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
++ else if (power != FB_BLANK_UNBLANK)
++ brightness = 0;
++
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
++ brightness ? contrast_ctr : 0);
++
++ bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
++
++ return 0;
++}
++
++static int atmel_bl_get_brightness(struct backlight_device *bl)
++{
++ struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
++
++ return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
++}
++
++static struct backlight_ops atmel_lcdc_bl_ops = {
++ .update_status = atmel_bl_update_status,
++ .get_brightness = atmel_bl_get_brightness,
++};
++
++static void init_backlight(struct atmel_lcdfb_info *sinfo)
++{
++ struct backlight_device *bl;
++
++ sinfo->bl_power = FB_BLANK_UNBLANK;
++
++ if (sinfo->backlight)
++ return;
++
++ bl = backlight_device_register("backlight", &sinfo->pdev->dev,
++ sinfo, &atmel_lcdc_bl_ops);
++ if (IS_ERR(sinfo->backlight)) {
++ dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
++ PTR_ERR(bl));
++ return;
++ }
++ sinfo->backlight = bl;
++
++ bl->props.power = FB_BLANK_UNBLANK;
++ bl->props.fb_blank = FB_BLANK_UNBLANK;
++ bl->props.max_brightness = 0xff;
++ bl->props.brightness = atmel_bl_get_brightness(bl);
++}
++
++static void exit_backlight(struct atmel_lcdfb_info *sinfo)
++{
++ if (sinfo->backlight)
++ backlight_device_unregister(sinfo->backlight);
++}
++
++#else
++
++static void init_backlight(struct atmel_lcdfb_info *sinfo)
++{
++ dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
++}
++
++static void exit_backlight(struct atmel_lcdfb_info *sinfo)
++{
++}
++
++#endif
++
++static void init_contrast(struct atmel_lcdfb_info *sinfo)
++{
++ /* have some default contrast/backlight settings */
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
++
++ if (sinfo->lcdcon_is_backlight)
++ init_backlight(sinfo);
++}
++
+
+ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
+ .type = FB_TYPE_PACKED_PIXELS,
+@@ -370,10 +472,6 @@
+ /* Disable all interrupts */
+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
+- /* Set contrast */
+- value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
+- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
+- lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
+ /* ...wait for DMA engine to become idle... */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+ msleep(10);
+@@ -577,6 +675,7 @@
+ sinfo->default_monspecs = pdata_sinfo->default_monspecs;
+ sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
+ sinfo->guard_time = pdata_sinfo->guard_time;
++ sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
+ } else {
+ dev_err(dev, "cannot get default configuration\n");
+ goto free_info;
+@@ -670,6 +769,9 @@
+ goto release_mem;
+ }
+
++ /* Initialize PWM for contrast or backlight ("off") */
++ init_contrast(sinfo);
++
+ /* interrupt */
+ ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
+ if (ret) {
+@@ -721,6 +823,7 @@
+ unregister_irqs:
+ free_irq(sinfo->irq_base, info);
+ unmap_mmio:
++ exit_backlight(sinfo);
+ iounmap(sinfo->mmio);
+ release_mem:
+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+@@ -755,6 +858,7 @@
+ if (!sinfo)
+ return 0;
+
++ exit_backlight(sinfo);
+ if (sinfo->atmel_lcdfb_power_control)
+ sinfo->atmel_lcdfb_power_control(0);
+ unregister_framebuffer(info);
+@@ -779,8 +883,45 @@
+ return 0;
+ }
+
++#ifdef CONFIG_PM
++
++static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
++{
++ struct fb_info *info = platform_get_drvdata(pdev);
++ struct atmel_lcdfb_info *sinfo = info->par;
++
++ sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
++ if (sinfo->atmel_lcdfb_power_control)
++ sinfo->atmel_lcdfb_power_control(0);
++ atmel_lcdfb_stop_clock(sinfo);
++
++ return 0;
++}
++
++static int atmel_lcdfb_resume(struct platform_device *pdev)
++{
++ struct fb_info *info = platform_get_drvdata(pdev);
++ struct atmel_lcdfb_info *sinfo = info->par;
++
++ atmel_lcdfb_start_clock(sinfo);
++ if (sinfo->atmel_lcdfb_power_control)
++ sinfo->atmel_lcdfb_power_control(1);
++ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
++
++ return 0;
++}
++
++#else
++#define atmel_lcdfb_suspend NULL
++#define atmel_lcdfb_resume NULL
++#endif
++
++
+ static struct platform_driver atmel_lcdfb_driver = {
+ .remove = __exit_p(atmel_lcdfb_remove),
++ .suspend = atmel_lcdfb_suspend,
++ .resume = atmel_lcdfb_resume,
+ .driver = {
+ .name = "atmel_lcdfb",
+ .owner = THIS_MODULE,
+diff -urN -x CVS linux-2.6.24/drivers/video/backlight/Kconfig linux-2.6/drivers/video/backlight/Kconfig
+--- linux-2.6.24/drivers/video/backlight/Kconfig 2008-03-01 22:02:14.000000000 +0200
++++ linux-2.6/drivers/video/backlight/Kconfig 2008-02-25 22:42:48.000000000 +0200
+@@ -50,6 +50,19 @@
+ To have support for your specific LCD panel you will have to
+ select the proper drivers which depend on this option.
+
++config BACKLIGHT_ATMEL_LCDC
++ bool "Atmel LCDC Contrast-as-Backlight control"
++ depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
++ default y if MACH_SAM9261EK || MACH_SAM9263EK
++ help
++ This provides a backlight control internal to the Atmel LCDC
++ driver. If the LCD "contrast control" on your board is wired
++ so it controls the backlight brightness, select this option to
++ export this as a PWM-based backlight control.
++
++ If in doubt, it's safe to enable this option; it doesn't kick
++ in unless the board's description says it's wired that way.
++
+ config BACKLIGHT_CORGI
+ tristate "Generic (aka Sharp Corgi) Backlight Driver"
+ depends on BACKLIGHT_CLASS_DEVICE
+@@ -90,3 +103,11 @@
+ help
+ If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
+ backlight driver.
++
++config BACKLIGHT_KB920x
++ tristate "KwikByte KB9202 Backlight Driver"
++ depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200
++ default y
++ help
++ If you have a KwikByte KB9202 board, say Y to enable the
++ backlight driver.
+diff -urN -x CVS linux-2.6.24/drivers/video/backlight/Makefile linux-2.6/drivers/video/backlight/Makefile
+--- linux-2.6.24/drivers/video/backlight/Makefile 2008-03-01 22:02:14.000000000 +0200
++++ linux-2.6/drivers/video/backlight/Makefile 2007-12-31 10:44:34.000000000 +0200
+@@ -9,3 +9,4 @@
+ obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
+ obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
+ obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
++obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o
+diff -urN -x CVS linux-2.6.24/drivers/video/backlight/kb920x_bl.c linux-2.6/drivers/video/backlight/kb920x_bl.c
+--- linux-2.6.24/drivers/video/backlight/kb920x_bl.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/drivers/video/backlight/kb920x_bl.c 2007-12-31 10:44:34.000000000 +0200
+@@ -0,0 +1,164 @@
++/*
++ * Backlight Driver for KB9202
++ *
++ * Copyright (c) 2006 KwikByte
++ *
++ * Based on Sharp's Corgi Backlight Driver
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/spinlock.h>
++#include <linux/fb.h>
++#include <linux/backlight.h>
++
++#include <asm/arch/gpio.h>
++
++/* The backlight is on(1)/off(0) */
++#define KB9202_DEFAULT_INTENSITY 1
++#define KB9202_MAX_INTENSITY 1
++
++static int kb9202bl_suspended;
++static int current_intensity = 0;
++static DEFINE_SPINLOCK(bl_lock);
++
++static int kb9202bl_set_intensity(struct backlight_device *bd)
++{
++ unsigned long flags;
++ int intensity = bd->props.brightness;
++
++ if (bd->props.power != FB_BLANK_UNBLANK)
++ intensity = 0;
++ if (bd->props.fb_blank != FB_BLANK_UNBLANK)
++ intensity = 0;
++ if (kb9202bl_suspended)
++ intensity = 0;
++
++ if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK))
++ intensity = 1;
++
++ spin_lock_irqsave(&bl_lock, flags);
++ if (intensity)
++ gpio_set_value(AT91_PIN_PC23, 1);
++ else
++ gpio_set_value(AT91_PIN_PC23, 0);
++ spin_unlock_irqrestore(&bl_lock, flags);
++
++ current_intensity = intensity;
++
++ return 0;
++}
++
++static int kb9202bl_get_intensity(struct backlight_device *bd)
++{
++ return current_intensity;
++}
++
++static struct backlight_ops kb9202bl_ops = {
++ .get_brightness = kb9202bl_get_intensity,
++ .update_status = kb9202bl_set_intensity,
++};
++
++static int __init kb9202bl_probe(struct platform_device *pdev)
++{
++ struct backlight_device *bd;
++
++ bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops);
++ if (IS_ERR(bd))
++ return PTR_ERR(bd);
++
++ platform_set_drvdata(pdev, bd);
++
++ bd->props.max_brightness = KB9202_MAX_INTENSITY;
++ bd->props.brightness = KB9202_DEFAULT_INTENSITY;
++ (void) kb9202bl_set_intensity(bd);
++
++ return 0;
++}
++
++static int kb9202bl_remove(struct platform_device *pdev)
++{
++ struct backlight_device *bd = platform_get_drvdata(pdev);
++
++ bd->props.brightness = 0;
++ bd->props.power = 0;
++ (void) kb9202bl_set_intensity(bd);
++
++ backlight_device_unregister(bd);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int kb9202bl_suspend(struct platform_device *pdev, pm_message_t state)
++{
++ struct backlight_device *bd = platform_get_drvdata(pdev);
++
++ kb9202bl_suspended = 1;
++ (void) kb9202bl_set_intensity(bd);
++ return 0;
++}
++
++static int kb9202bl_resume(struct platform_device *pdev)
++{
++ struct backlight_device *bd = platform_get_drvdata(pdev);
++
++ kb9202bl_suspended = 0;
++ (void) kb9202bl_set_intensity(bd);
++ return 0;
++}
++#else
++#define kb9202bl_suspend NULL
++#define kb9202bl_resume NULL
++#endif
++
++static struct platform_driver kb9202bl_driver = {
++ .probe = kb9202bl_probe,
++ .remove = kb9202bl_remove,
++ .suspend = kb9202bl_suspend,
++ .resume = kb9202bl_resume,
++ .driver = {
++ .name = "kb9202-bl",
++ .owner = THIS_MODULE,
++ },
++};
++
++static struct platform_device *kb9202bl_device;
++
++static int __init kb9202bl_init(void)
++{
++ int ret;
++
++ ret = platform_driver_register(&kb9202bl_driver);
++ if (!ret) {
++ kb9202bl_device = platform_device_alloc("kb9202-bl", -1);
++ if (!kb9202bl_device)
++ return -ENOMEM;
++
++ ret = platform_device_add(kb9202bl_device);
++ if (ret) {
++ platform_device_put(kb9202bl_device);
++ platform_driver_unregister(&kb9202bl_driver);
++ }
++ }
++ return ret;
++}
++
++static void __exit kb9202bl_exit(void)
++{
++ platform_device_unregister(kb9202bl_device);
++ platform_driver_unregister(&kb9202bl_driver);
++}
++
++module_init(kb9202bl_init);
++module_exit(kb9202bl_exit);
++
++MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
++MODULE_DESCRIPTION("KB9202 Backlight Driver");
++MODULE_LICENSE("GPL");
+diff -urN -x CVS linux-2.6.24/drivers/video/s1d15605fb.c linux-2.6/drivers/video/s1d15605fb.c
+--- linux-2.6.24/drivers/video/s1d15605fb.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/drivers/video/s1d15605fb.c 2007-12-31 10:44:34.000000000 +0200
+@@ -0,0 +1,658 @@
++/*
++ * drivers/video/s1d15605.c
++ *
++ * Adapted from several sources including:
++ * 1) Driver for AT91 LCD Controller
++ * Copyright (C) 2006 Atmel
++ *
++ * 2) Copyright (C) 2005 S. Kevin Hester
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file COPYING in the main directory of this archive for
++ * more details.
++ *
++ * This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD
++ * display. This display uses a clone of the common Epson SED 1531 display
++ * controller.
++ *
++ * I've heavily borrowed code from the vfb.c driver.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifdef DEBUG
++#define MSG(string, args...) printk("s1d15605fb:" string, ##args)
++#else
++#define MSG(string, args...)
++#endif
++
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/dma-mapping.h>
++#include <linux/interrupt.h>
++#include <linux/clk.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++
++#include <asm/uaccess.h>
++
++#include <asm/arch/board.h>
++#include <asm/arch/gpio.h>
++
++#ifdef CONFIG_PMAC_BACKLIGHT
++#include <asm/backlight.h>
++#endif
++
++#define VIDEOWIDTH 128
++#define VIDEOHEIGHT 64
++#define VIDEODEPTH 1 /* bits/pixel */
++#define VIDEOWIDTH_BYTES ((VIDEOWIDTH * VIDEODEPTH) / 8)
++
++/* The number of bytes that actually go to the device */
++#define ACTUALVIDEOMEMSIZE (VIDEOWIDTH_BYTES * VIDEOHEIGHT)
++#define VIDEOMEMSIZE PAGE_SIZE
++
++static struct fb_var_screeninfo s1d15605_default __initdata = {
++ .xres = VIDEOWIDTH,
++ .yres = VIDEOHEIGHT,
++ .xres_virtual = VIDEOWIDTH,
++ .yres_virtual = VIDEOHEIGHT,
++ .bits_per_pixel = VIDEODEPTH,
++ .red = { 0, 1, 0 },
++ .green = { 0, 1, 0 },
++ .blue = { 0, 1, 0 },
++ .activate = FB_ACTIVATE_NOW,
++ .pixclock = 20000,
++ .vmode = FB_VMODE_NONINTERLACED,
++};
++
++static struct fb_fix_screeninfo s1d15605_fix __initdata = {
++ .id = "s1d15605",
++ .type = FB_TYPE_PACKED_PIXELS,
++ .visual = FB_VISUAL_MONO10,
++ .xpanstep = 0,
++ .ypanstep = 0,
++ .ywrapstep = 0,
++ .accel = FB_ACCEL_NONE,
++};
++
++struct s1d15605fb_info {
++ struct fb_info *info;
++ char *mmio;
++ unsigned long reset_pin;
++ struct platform_device *pdev;
++};
++
++/*
++ * LCD device interface
++ */
++#define RESET_DISPLAY 0xE2
++#define LCD_BIAS_1_9 0xA2
++#define ADC_SELECT_REVERSE 0xA1
++#define COMMON_OUTPUT_NORMAL 0xC0
++#define V5_RESISTOR_RATIO 0x26
++#define ELECTRONIC_VOLUME_SET 0x81
++#define ELECTRONIC_VOLUME_INIT 0x20
++#define POWER_CONTROL_SET 0x28
++#define VOLTAGE_REGULATOR 0x02
++#define VOLTAGE_FOLLOWER 0x01
++#define BOOSTER_CIRCUIT 0x04
++#define DISPLAY_ON 0xAF
++#define START_LINE_SET 0x40
++#define PAGE_ADDRESS_SET 0xB0
++#define COLUMN_ADDRESS_HIGH 0x10
++#define COLUMN_ADDRESS_LOW 0x00
++#define RESISTOR_RATIO_START 0x20
++
++#define NUM_OF_PAGES 8
++#define NUM_OF_COLUMNS 128
++
++#define WRITE_COMMAND(x) __raw_writeb((x), (sinfo)->mmio)
++#define READ_COMMAND __raw_readb((sinfo)->mmio)
++#define WRITE_DATA(x) __raw_writeb((x), (sinfo)->mmio + (0x10000))
++#define READ_DATA __raw_readb((sinfo)->mmio + (0x10000))
++
++
++/*
++ * s1d15605fb_resize_framebuffer
++ *
++ * Free allocated space if different. Allocate on new of changed.
++ * Returns -ENOMEM if the new framebuffer can not be allocated,
++ * zero on success.
++ */
++static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo)
++{
++ struct fb_info *info = sinfo->info;
++ struct fb_fix_screeninfo *fix = &info->fix;
++ struct fb_var_screeninfo *var = &info->var;
++ unsigned int new_size;
++ void *new_vaddr;
++
++ new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8);
++
++ MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__,
++ var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size);
++
++ if (new_size == fix->smem_len)
++ return 0;
++
++ if (fix->smem_len) {
++ kfree(info->screen_base);
++ }
++
++ new_vaddr = kmalloc(new_size, GFP_KERNEL);
++
++ if (!new_vaddr) {
++ fix->smem_len = 0;
++ return -ENOMEM;
++ }
++
++ info->screen_base = new_vaddr;
++ fix->smem_start = (unsigned)new_vaddr;
++ fix->smem_len = new_size;
++ fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
++
++ dev_info(info->device,
++ "%luKiB frame buffer at %08lx (mapped at %p)\n",
++ (unsigned long)info->fix.smem_len / 1024,
++ (unsigned long)info->fix.smem_start,
++ info->screen_base);
++
++ return 0;
++}
++
++
++/*
++ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to
++ * bottom) each page seems to be eight pixels high, where these eight pixels are
++ * one byte
++ */
++static void s1d15605_update(struct fb_info *info)
++{
++ struct s1d15605fb_info *sinfo = info->par;
++ int page, i, row, colmask;
++ u8 retVal, *rowPtr;
++
++ WRITE_COMMAND(START_LINE_SET);
++ for (page = 0; page < NUM_OF_PAGES; ++page) {
++ WRITE_COMMAND(PAGE_ADDRESS_SET + page);
++ WRITE_COMMAND(COLUMN_ADDRESS_HIGH);
++ WRITE_COMMAND(COLUMN_ADDRESS_LOW);
++
++ for (i = 0; i < NUM_OF_COLUMNS; ++i)
++ {
++ /* point of opportunity: optimization */
++ colmask = (1 << (i & 0x7));
++ rowPtr = (u8*)(info->screen_base);
++ rowPtr += (VIDEOWIDTH_BYTES * 8 * page);
++ rowPtr += (i >> 3);
++ retVal = 0;
++ for (row = 0; row < 8; ++row)
++ {
++ retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0);
++ rowPtr += VIDEOWIDTH_BYTES;
++ }
++ WRITE_DATA(retVal);
++ }
++ }
++
++ WRITE_COMMAND(DISPLAY_ON);
++}
++
++
++/*
++ * Setting the video mode has been split into two parts.
++ * First part, xxxfb_check_var, must not write anything
++ * to hardware, it should only verify and adjust var.
++ * This means it doesn't alter par but it does use hardware
++ * data from it to check this var.
++ */
++static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
++{
++ /*
++ * Some very basic checks
++ */
++ if (!var->xres)
++ var->xres = 1;
++ if (!var->yres)
++ var->yres = 1;
++ if (var->xres > var->xres_virtual)
++ var->xres_virtual = var->xres;
++ if (var->yres > var->yres_virtual)
++ var->yres_virtual = var->yres;
++
++ if(var->bits_per_pixel > VIDEODEPTH)
++ return -EINVAL;
++
++ /*
++ * Memory limit
++ */
++ if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) >
++ ACTUALVIDEOMEMSIZE)
++ return -ENOMEM;
++
++ /*
++ * Now that we checked it we alter var. The reason being is that the video
++ * mode passed in might not work but slight changes to it might make it
++ * work. This way we let the user know what is acceptable.
++ */
++ switch (var->bits_per_pixel) {
++ case 1:
++ var->red.offset = var->green.offset = var->blue.offset = 0;
++ var->red.length = var->green.length = var->blue.length
++ = var->bits_per_pixel;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ var->xoffset = var->yoffset = 0;
++ var->red.msb_right = var->green.msb_right = var->blue.msb_right =
++ var->transp.msb_right = 0;
++
++ return 0;
++}
++
++
++/*
++ * This routine actually sets the video mode. It's in here where we
++ * the hardware state info->par and fix which can be affected by the
++ * change in par. For this driver it doesn't do much.
++ */
++static int s1d15605_set_par(struct fb_info *info)
++{
++ int ret;
++
++ MSG("%s:\n", __func__);
++ MSG(" * resolution: %ux%u (%ux%u virtual)\n",
++ info->var.xres, info->var.yres,
++ info->var.xres_virtual, info->var.yres_virtual);
++
++ ret = s1d15605fb_resize_framebuffer(info->par);
++
++ info->fix.visual = FB_VISUAL_MONO10;
++ return ret;
++}
++
++
++/*
++ * Set a single color register. The values supplied are already
++ * rounded down to the hardware's capabilities (according to the
++ * entries in the var structure). Return != 0 for invalid regno.
++ */
++static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
++ u_int transp, struct fb_info *info)
++{
++ if (regno > 1) /* no. of hw registers - we only do mono now */
++ return 1;
++
++ return 0;
++}
++
++
++/*
++ * Currently, the routine will simply shut-off the backlight and prevent
++ * updates/refreshes. Modify according to application.
++ *
++ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off
++ */
++static int s1d15605_blank(int blank, struct fb_info *info)
++{
++#ifdef CONFIG_PMAC_BACKLIGHT
++ if (blank)
++ pmac_backlight->props.power = FB_BLANK_POWERDOWN;
++ else
++ pmac_backlight->props.power = FB_BLANK_UNBLANK;
++ backlight_update_status(pmac_backlight);
++#endif
++ return 1;
++}
++
++
++/*
++ * Pan or Wrap the Display
++ *
++ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
++ */
++/*
++static int s1d15605_pan_display(struct fb_var_screeninfo *var,
++ struct fb_info *info)
++{
++ if (var->vmode & FB_VMODE_YWRAP) {
++ if (var->yoffset < 0
++ || var->yoffset >= info->var.yres_virtual
++ || var->xoffset)
++ return -EINVAL;
++ } else {
++ if (var->xoffset + var->xres > info->var.xres_virtual ||
++ var->yoffset + var->yres > info->var.yres_virtual)
++ return -EINVAL;
++ }
++ info->var.xoffset = var->xoffset;
++ info->var.yoffset = var->yoffset;
++ if (var->vmode & FB_VMODE_YWRAP)
++ info->var.vmode |= FB_VMODE_YWRAP;
++ else
++ info->var.vmode &= ~FB_VMODE_YWRAP;
++ return 0;
++}
++*/
++
++
++static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region)
++{
++ cfb_copyarea(info, region);
++ s1d15605_update(info);
++}
++
++
++static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect)
++{
++ cfb_fillrect(info, rect);
++ s1d15605_update(info);
++}
++
++
++static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image)
++{
++ cfb_imageblit(p, image);
++ s1d15605_update(p);
++}
++
++
++/*
++ * Write the users data to our framebuffer, and then trigger a psuedo DMA
++ */
++static ssize_t s1d15605_write(struct file *file, const char *buf,
++ size_t count, loff_t *ppos)
++{
++ unsigned long p = *ppos;
++ struct inode *inode = file->f_dentry->d_inode;
++ int fbidx = iminor(inode);
++ struct fb_info *info = registered_fb[fbidx];
++ int err;
++
++ if (p > info->fix.smem_len)
++ return -ENOSPC;
++ if (count >= info->fix.smem_len)
++ count = info->fix.smem_len;
++ err = 0;
++ if (count + p > info->fix.smem_len) {
++ count = info->fix.smem_len - p;
++ err = -ENOSPC;
++ }
++ if (count) {
++ char *base_addr;
++
++ base_addr = info->screen_base;
++ count -= copy_from_user(base_addr+p, buf, count);
++ *ppos += count;
++ err = -EFAULT;
++ }
++
++ s1d15605_update(info);
++
++ if (count)
++ return count;
++
++ return err;
++}
++
++#ifdef USE_PRIVATE_VMA_FXS
++static void s1d15605_vma_open(struct vm_area_struct *vma)
++{
++ // FIXME - store stats in the device data via vm_private_data
++}
++
++
++static void s1d15605_vma_close(struct vm_area_struct *vma)
++{
++ // FIXME - store stats in the device data via vm_private_data
++}
++
++
++static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma,
++ unsigned long address, int *type)
++{
++ struct page *page;
++ struct fb_info *info = vma->vm_private_data;
++
++ page = virt_to_page(info->screen_base);
++ get_page(page);
++
++ // FIXME - now someone has a link to our page, start periodically blitting
++ // latest updates to the actual device.
++
++ return page;
++}
++
++
++static struct vm_operations_struct s1d15605_vm_ops = {
++ .open = s1d15605_vma_open,
++ .close = s1d15605_vma_close,
++ .nopage = s1d15605_vma_nopage
++};
++
++
++/* We don't do much here - because we have special vm_ops */
++static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma)
++{
++ vma->vm_ops = &s1d15605_vm_ops;
++ vma->vm_flags |= VM_RESERVED;
++ vma->vm_private_data = info;
++ s1d15605_vma_open(vma);
++
++ return 0;
++}
++#endif /* USE_PRIVATE_VMA_FXS */
++
++
++static struct fb_ops s1d15605fb_ops = {
++ .owner = THIS_MODULE,
++ .fb_check_var = s1d15605_check_var,
++ .fb_set_par = s1d15605_set_par,
++ .fb_setcolreg = s1d15605_setcolreg,
++ .fb_blank = s1d15605_blank,
++// .fb_pan_display = s1d15605_pan_display,
++ .fb_fillrect = s1d15605_fillrect,
++ .fb_copyarea = s1d15605_copyarea,
++ .fb_imageblit = s1d15605_imageblit,
++ .fb_write = s1d15605_write,
++#ifdef USE_PRIVATE_VMA_FXS
++ .fb_mmap = s1d15605_mmap,
++#endif
++};
++
++
++static void s1d15605_device_init(struct s1d15605fb_info *sinfo) {
++
++ char value;
++
++ /* release the reset line by reading the device - proto hardware */
++ value = READ_COMMAND;
++ value = READ_COMMAND;
++
++#ifdef CONFIG_MACH_KB9200
++ /* new boards have dedicated reset line */
++ gpio_set_value(sinfo->reset_pin, 1);
++#endif
++
++ /* initialize the device within 5ms */
++ WRITE_COMMAND(RESET_DISPLAY);
++ WRITE_COMMAND(LCD_BIAS_1_9);
++ WRITE_COMMAND(ADC_SELECT_REVERSE);
++ WRITE_COMMAND(COMMON_OUTPUT_NORMAL);
++ WRITE_COMMAND(V5_RESISTOR_RATIO);
++ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
++ WRITE_COMMAND(ELECTRONIC_VOLUME_INIT);
++ WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT);
++ WRITE_COMMAND(DISPLAY_ON);
++
++ WRITE_COMMAND(RESISTOR_RATIO_START + 4);
++ WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
++ WRITE_COMMAND(0x33);
++}
++
++
++static int __init s1d15605fb_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct fb_info *info;
++ struct s1d15605fb_info *sinfo;
++ int ret;
++
++ MSG("%s\n", __func__);
++
++ if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) {
++ dev_err(dev, "Cannot allocate framebuffer struct\n");
++ return -ENOMEM;
++ }
++
++ sinfo = info->par;
++ sinfo->info = info;
++ sinfo->pdev = pdev;
++
++ if (pdev->num_resources < 2) {
++ dev_err(dev, "Resources unusable\n");
++ ret = -ENODEV;
++ goto free_info;
++ }
++
++ info->fbops = &s1d15605fb_ops;
++ strcpy(info->fix.id, pdev->name);
++
++ info->fix.mmio_start = pdev->resource[0].start;
++ info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1;
++ sinfo->reset_pin = pdev->resource[1].start;
++
++ ret = s1d15605fb_resize_framebuffer(sinfo);
++ if (ret < 0) {
++ dev_err(dev, "Cannot resize framebuffer: %d\n", ret);
++ goto free_fb;
++ }
++
++ if (!request_mem_region(info->fix.mmio_start,
++ info->fix.mmio_len, pdev->name)) {
++ ret = -EBUSY;
++ goto free_fb;
++ }
++
++ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
++ if (!sinfo->mmio) {
++ dev_err(dev, "Cannot map LCD memory region\n");
++ goto release_mem;
++ }
++
++ s1d15605_device_init(sinfo);
++
++ ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1);
++
++ if (!ret || (ret == 4))
++ info->var = s1d15605_default;
++
++ info->fix = s1d15605_fix;
++ info->flags = FBINFO_FLAG_DEFAULT |
++/* FBINFO_HWACCEL_YPAN | */
++ FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
++
++ ret = register_framebuffer(info);
++ if (ret < 0) {
++ dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
++ goto unmap_mmio;
++ }
++
++ dev_set_drvdata(dev, info);
++
++ memset(info->screen_base, 0, info->fix.smem_len);
++ info->var.activate |= FB_ACTIVATE_NOW;
++ ret = fb_set_var(info, &info->var);
++ if (ret) {
++ dev_warn(dev, "Unable to set display parameters\n");
++ }
++
++ info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
++
++ dev_dbg(dev, "%s SUCCESS\n", __func__);
++
++ dev_info(dev, "Driver $Revision: 1.1 $\n");
++
++ return 0;
++
++unmap_mmio:
++ iounmap(sinfo->mmio);
++release_mem:
++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
++free_fb:
++ kfree(info->screen_base);
++
++free_info:
++ framebuffer_release(info);
++
++ dev_dbg(dev, "%s FAILED\n", __func__);
++ return ret;
++}
++
++
++static int __exit s1d15605fb_remove(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct fb_info *info = dev_get_drvdata(dev);
++ struct s1d15605fb_info *sinfo = info->par;
++
++ if (!sinfo)
++ return 0;
++
++ unregister_framebuffer(info);
++
++ iounmap(sinfo->mmio);
++ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
++
++ kfree(info->screen_base);
++
++ dev_set_drvdata(dev, NULL);
++ framebuffer_release(info);
++ return 0;
++}
++
++
++static struct platform_driver s1d15605fb_driver = {
++ .remove = __exit_p(s1d15605fb_remove),
++ .driver = {
++ .name = "s1d15605fb",
++ .owner = THIS_MODULE,
++ },
++};
++
++
++static int __init s1d15605fb_init(void)
++{
++ return platform_driver_probe(&s1d15605fb_driver, s1d15605fb_probe);
++}
++
++
++static void __exit s1d15605fb_exit(void)
++{
++ platform_driver_unregister(&s1d15605fb_driver);
++}
++
++
++module_init(s1d15605fb_init);
++module_exit(s1d15605fb_exit);
++
++
++MODULE_AUTHOR("KwikByte");
++MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
++MODULE_LICENSE("GPL");
+diff -urN -x CVS linux-2.6.24/drivers/watchdog/Kconfig linux-2.6/drivers/watchdog/Kconfig
+--- linux-2.6.24/drivers/watchdog/Kconfig 2008-03-01 22:02:14.000000000 +0200
++++ linux-2.6/drivers/watchdog/Kconfig 2007-12-31 10:44:10.000000000 +0200
+@@ -66,6 +66,14 @@
+ Watchdog timer embedded into AT91RM9200 chips. This will reboot your
+ system when the timeout is reached.
+
++config AT91SAM9_WATCHDOG
++ tristate "AT91SAM9 watchdog"
++ depends on ARCH_AT91 && !ARCH_AT91RM9200
++ select WATCHDOG_NOWAYOUT
++ help
++ Watchdog timer embedded into AT91SAM9 chips. This will reboot your
++ system when the timeout is reached.
++
+ config 21285_WATCHDOG
+ tristate "DC21285 watchdog"
+ depends on FOOTBRIDGE
+diff -urN -x CVS linux-2.6.24/drivers/watchdog/Makefile linux-2.6/drivers/watchdog/Makefile
+--- linux-2.6.24/drivers/watchdog/Makefile 2008-03-01 22:02:14.000000000 +0200
++++ linux-2.6/drivers/watchdog/Makefile 2007-12-31 10:44:20.000000000 +0200
+@@ -26,6 +26,7 @@
+
+ # ARM Architecture
+ obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
++obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
+ obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
+ obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
+ obj-$(CONFIG_977_WATCHDOG) += wdt977.o
+diff -urN -x CVS linux-2.6.24/drivers/watchdog/at91sam9_wdt.c linux-2.6/drivers/watchdog/at91sam9_wdt.c
+--- linux-2.6.24/drivers/watchdog/at91sam9_wdt.c 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/drivers/watchdog/at91sam9_wdt.c 2007-12-31 15:18:43.000000000 +0200
+@@ -0,0 +1,258 @@
++/*
++ * Watchdog driver for Atmel AT91SAM9x processors.
++ *
++ * Copyright (C) 2007 Renaud CERRATO r.cerrato@til-technologies.fr
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ * The Watchdog Timer Mode Register can be only written to once. If the
++ * timeout need to be set from Linux, be sure that the bootstrap or the
++ * bootloader doesn't write to this register.
++ */
++
++#include <linux/errno.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/miscdevice.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/platform_device.h>
++#include <linux/types.h>
++#include <linux/watchdog.h>
++#include <linux/bitops.h>
++#include <linux/uaccess.h>
++
++#include <asm/arch/at91_wdt.h>
++
++
++#define WDT_MAX_TIME 16 /* seconds */
++
++static int wdt_timeout = -1; /* invalid */
++
++module_param(wdt_timeout, int, 0);
++MODULE_PARM_DESC(wdt_timeout, "Watchdog time in seconds. (default = disabled)");
++
++
++static unsigned long at91wdt_busy;
++
++/* ......................................................................... */
++
++/*
++ * Reload the watchdog timer. (ie, pat the watchdog)
++ */
++static void inline at91_wdt_reload(void)
++{
++ at91_sys_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
++}
++
++/* ......................................................................... */
++
++/*
++ * Watchdog device is opened, and watchdog starts running.
++ */
++static int at91_wdt_open(struct inode *inode, struct file *file)
++{
++ if (test_and_set_bit(0, &at91wdt_busy))
++ return -EBUSY;
++
++ return nonseekable_open(inode, file);
++}
++
++/*
++ * Close the watchdog device.
++ */
++static int at91_wdt_close(struct inode *inode, struct file *file)
++{
++ clear_bit(0, &at91wdt_busy);
++ return 0;
++}
++
++/*
++ * Change the watchdog time interval.
++ */
++static int at91_wdt_settimeout(int new_time)
++{
++ unsigned int reg, mr;
++ /*
++ * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
++ *
++ * Since WDV is a 12-bit counter, the maximum period is
++ * 4096 / 256 = 16 seconds.
++ */
++ if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
++ return -EINVAL;
++
++ wdt_timeout = new_time;
++
++ /* Program the Watchdog */
++ reg = AT91_WDT_WDRSTEN /* causes watchdog reset */
++ | AT91_WDT_WDRPROC /* causes processor reset */
++ | AT91_WDT_WDDBGHLT /* disabled in debug mode */
++ | AT91_WDT_WDD /* restart at any time */
++ | (((wdt_timeout * 256) - 1) & AT91_WDT_WDV); /* timer value */
++ at91_sys_write(AT91_WDT_MR, reg);
++
++ /* Check if watchdog could be programmed */
++ mr = at91_sys_read(AT91_WDT_MR);
++ if (mr != reg) {
++ printk(KERN_ERR "at91sam9_wdt: Watchdog register already programmed.\n");
++ return -EIO;
++ }
++
++ at91_wdt_reload();
++
++ printk(KERN_INFO "AT91SAM9 Watchdog enabled (%d seconds, nowayout)\n", wdt_timeout);
++ return 0;
++}
++
++static struct watchdog_info at91_wdt_info = {
++ .identity = "at91sam9 watchdog",
++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
++};
++
++/*
++ * Handle commands from user-space.
++ */
++static int at91_wdt_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
++{
++ void __user *argp = (void __user *)arg;
++ int __user *p = argp;
++ int new_value, err;
++
++ switch (cmd) {
++ case WDIOC_KEEPALIVE:
++ at91_wdt_reload(); /* pat the watchdog */
++ return 0;
++
++ case WDIOC_GETSUPPORT:
++ return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0;
++
++ case WDIOC_SETTIMEOUT:
++ if (get_user(new_value, p))
++ return -EFAULT;
++
++ err = at91_wdt_settimeout(new_value);
++ if (err)
++ return err;
++
++ return put_user(wdt_timeout, p); /* return current value */
++
++ case WDIOC_GETTIMEOUT:
++ return put_user(wdt_timeout, p);
++
++ case WDIOC_GETSTATUS:
++ case WDIOC_GETBOOTSTATUS:
++ return put_user(0, p);
++ }
++ return -ENOTTY;
++}
++
++/*
++ * Pat the watchdog whenever device is written to.
++ */
++static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
++{
++ at91_wdt_reload(); /* pat the watchdog */
++ return len;
++}
++
++/* ......................................................................... */
++
++static const struct file_operations at91wdt_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .ioctl = at91_wdt_ioctl,
++ .open = at91_wdt_open,
++ .release = at91_wdt_close,
++ .write = at91_wdt_write,
++};
++
++static struct miscdevice at91wdt_miscdev = {
++ .minor = WATCHDOG_MINOR,
++ .name = "watchdog",
++ .fops = &at91wdt_fops,
++};
++
++static int __init at91wdt_probe(struct platform_device *pdev)
++{
++ int res;
++
++ if (at91wdt_miscdev.parent)
++ return -EBUSY;
++ at91wdt_miscdev.parent = &pdev->dev;
++
++ res = misc_register(&at91wdt_miscdev);
++ if (res)
++ return res;
++
++ /* Set watchdog */
++ if (at91_wdt_settimeout(wdt_timeout) == -EINVAL) {
++ pr_info("at91sam9_wdt: invalid timeout (must be between 1 and %d)\n", WDT_MAX_TIME);
++ return 0;
++ }
++
++ return 0;
++}
++
++static int __exit at91wdt_remove(struct platform_device *pdev)
++{
++ int res;
++
++ res = misc_deregister(&at91wdt_miscdev);
++ if (!res)
++ at91wdt_miscdev.parent = NULL;
++
++ return res;
++}
++
++#ifdef CONFIG_PM
++
++static int at91wdt_suspend(struct platform_device *pdev, pm_message_t message)
++{
++ return 0;
++}
++
++static int at91wdt_resume(struct platform_device *pdev)
++{
++ return 0;
++}
++
++#else
++#define at91wdt_suspend NULL
++#define at91wdt_resume NULL
++#endif
++
++static struct platform_driver at91wdt_driver = {
++ .remove = __exit_p(at91wdt_remove),
++ .suspend = at91wdt_suspend,
++ .resume = at91wdt_resume,
++ .driver = {
++ .name = "at91_wdt",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at91sam_wdt_init(void)
++{
++ return platform_driver_probe(&at91wdt_driver, at91wdt_probe);
++}
++
++static void __exit at91sam_wdt_exit(void)
++{
++ platform_driver_unregister(&at91wdt_driver);
++}
++
++module_init(at91sam_wdt_init);
++module_exit(at91sam_wdt_exit);
++
++MODULE_AUTHOR("Renaud CERRATO");
++MODULE_DESCRIPTION("Watchdog driver for Atmel AT91SAM9x processors");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_ecc.h linux-2.6/include/asm-arm/arch-at91/at91_ecc.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91_ecc.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91_ecc.h 2008-02-25 21:15:20.000000000 +0200
+@@ -13,26 +13,26 @@
+ #ifndef AT91_ECC_H
+ #define AT91_ECC_H
+
+-#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */
++#define AT91_ECC_CR (0x00) /* Control register */
+ #define AT91_ECC_RST (1 << 0) /* Reset parity */
+
+-#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */
++#define AT91_ECC_MR (0x04) /* Mode register */
+ #define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */
+ #define AT91_ECC_PAGESIZE_528 (0)
+ #define AT91_ECC_PAGESIZE_1056 (1)
+ #define AT91_ECC_PAGESIZE_2112 (2)
+ #define AT91_ECC_PAGESIZE_4224 (3)
+
+-#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */
++#define AT91_ECC_SR (0x08) /* Status register */
+ #define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */
+ #define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
+ #define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */
+
+-#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */
++#define AT91_ECC_PR (0x0c) /* Parity register */
+ #define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */
+ #define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
+
+-#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */
++#define AT91_ECC_NPR (0x10) /* NParity register */
+ #define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
+
+ #endif
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_lcdc.h linux-2.6/include/asm-arm/arch-at91/at91_lcdc.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91_lcdc.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91_lcdc.h 1970-01-01 02:00:00.000000000 +0200
+@@ -1,148 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91/at91_lcdc.h
+- *
+- * LCD Controller (LCDC).
+- * Based on AT91SAM9261 datasheet revision E.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91_LCDC_H
+-#define AT91_LCDC_H
+-
+-#define AT91_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */
+-#define AT91_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */
+-#define AT91_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */
+-#define AT91_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */
+-#define AT91_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */
+-#define AT91_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */
+-
+-#define AT91_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */
+-#define AT91_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */
+-#define AT91_LCDC_BLENGTH (0x7f << 24) /* Burst Length */
+-
+-#define AT91_LCDC_DMACON 0x1c /* DMA Control Register */
+-#define AT91_LCDC_DMAEN (0x1 << 0) /* DMA Enable */
+-#define AT91_LCDC_DMARST (0x1 << 1) /* DMA Reset */
+-#define AT91_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */
+-
+-#define AT91_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */
+-#define AT91_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */
+-#define AT91_LCDC_CLKVAL (0x1ff << 12) /* Clock Divider */
+-#define AT91_LCDC_LINCNT (0x7ff << 21) /* Line Counter */
+-
+-#define AT91_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */
+-#define AT91_LCDC_DISTYPE (3 << 0) /* Display Type */
+-#define AT91_LCDC_DISTYPE_STNMONO (0 << 0)
+-#define AT91_LCDC_DISTYPE_STNCOLOR (1 << 0)
+-#define AT91_LCDC_DISTYPE_TFT (2 << 0)
+-#define AT91_LCDC_SCANMOD (1 << 2) /* Scan Mode */
+-#define AT91_LCDC_SCANMOD_SINGLE (0 << 2)
+-#define AT91_LCDC_SCANMOD_DUAL (1 << 2)
+-#define AT91_LCDC_IFWIDTH (3 << 3) /*Interface Width */
+-#define AT91_LCDC_IFWIDTH_4 (0 << 3)
+-#define AT91_LCDC_IFWIDTH_8 (1 << 3)
+-#define AT91_LCDC_IFWIDTH_16 (2 << 3)
+-#define AT91_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */
+-#define AT91_LCDC_PIXELSIZE_1 (0 << 5)
+-#define AT91_LCDC_PIXELSIZE_2 (1 << 5)
+-#define AT91_LCDC_PIXELSIZE_4 (2 << 5)
+-#define AT91_LCDC_PIXELSIZE_8 (3 << 5)
+-#define AT91_LCDC_PIXELSIZE_16 (4 << 5)
+-#define AT91_LCDC_PIXELSIZE_24 (5 << 5)
+-#define AT91_LCDC_INVVD (1 << 8) /* LCD Data polarity */
+-#define AT91_LCDC_INVVD_NORMAL (0 << 8)
+-#define AT91_LCDC_INVVD_INVERTED (1 << 8)
+-#define AT91_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */
+-#define AT91_LCDC_INVFRAME_NORMAL (0 << 9)
+-#define AT91_LCDC_INVFRAME_INVERTED (1 << 9)
+-#define AT91_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */
+-#define AT91_LCDC_INVLINE_NORMAL (0 << 10)
+-#define AT91_LCDC_INVLINE_INVERTED (1 << 10)
+-#define AT91_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */
+-#define AT91_LCDC_INVCLK_NORMAL (0 << 11)
+-#define AT91_LCDC_INVCLK_INVERTED (1 << 11)
+-#define AT91_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */
+-#define AT91_LCDC_INVDVAL_NORMAL (0 << 12)
+-#define AT91_LCDC_INVDVAL_INVERTED (1 << 12)
+-#define AT91_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */
+-#define AT91_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
+-#define AT91_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
+-#define AT91_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */
+-#define AT91_LCDC_MEMOR_BIG (0 << 31)
+-#define AT91_LCDC_MEMOR_LITTLE (1 << 31)
+-
+-#define AT91_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */
+-#define AT91_LCDC_VFP (0xff << 0) /* Vertical Front Porch */
+-#define AT91_LCDC_VBP (0xff << 8) /* Vertical Back Porch */
+-#define AT91_LCDC_VPW (0x3f << 16) /* Vertical Synchronization Pulse Width */
+-#define AT91_LCDC_VHDLY (0xf << 24) /* Vertical to Horizontal Delay */
+-
+-#define AT91_LCDC_TIM2 0x080c /* LCD Timing Register 2 */
+-#define AT91_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */
+-#define AT91_LCDC_HPW (0x3f << 8) /* Horizontal Synchronization Pulse Width */
+-#define AT91_LCDC_HFP (0x7ff << 21) /* Horizontal Front Porch */
+-
+-#define AT91_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */
+-#define AT91_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */
+-#define AT91_LCDC_HOZVAL (0x7ff << 21) /* Horizontal Size of LCD Module */
+-
+-#define AT91_LCDC_FIFO 0x0814 /* LCD FIFO Register */
+-#define AT91_LCDC_FIFOTH (0xffff) /* FIFO Threshold */
+-
+-#define AT91_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */
+-#define AT91_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */
+-#define AT91_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */
+-#define AT91_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */
+-#define AT91_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */
+-#define AT91_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */
+-#define AT91_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */
+-#define AT91_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */
+-#define AT91_LCDC_DP1_2_VAL (0xff)
+-#define AT91_LCDC_DP4_7_VAL (0xfffffff)
+-#define AT91_LCDC_DP3_5_VAL (0xfffff)
+-#define AT91_LCDC_DP2_3_VAL (0xfff)
+-#define AT91_LCDC_DP5_7_VAL (0xfffffff)
+-#define AT91_LCDC_DP3_4_VAL (0xffff)
+-#define AT91_LCDC_DP4_5_VAL (0xfffff)
+-#define AT91_LCDC_DP6_7_VAL (0xfffffff)
+-
+-#define AT91_LCDC_PWRCON 0x083c /* Power Control Register */
+-#define AT91_LCDC_PWR (1 << 0) /* LCD Module Power Control */
+-#define AT91_LCDC_GUARDT (0x7f << 1) /* Delay in Frame Period */
+-#define AT91_LCDC_BUSY (1 << 31) /* LCD Busy */
+-
+-#define AT91_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */
+-#define AT91_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */
+-#define AT91_LCDC_PS_DIV1 (0 << 0)
+-#define AT91_LCDC_PS_DIV2 (1 << 0)
+-#define AT91_LCDC_PS_DIV4 (2 << 0)
+-#define AT91_LCDC_PS_DIV8 (3 << 0)
+-#define AT91_LCDC_POL (1 << 2) /* Polarity of output Pulse */
+-#define AT91_LCDC_POL_NEGATIVE (0 << 2)
+-#define AT91_LCDC_POL_POSITIVE (1 << 2)
+-#define AT91_LCDC_ENA (1 << 3) /* PWM generator Control */
+-#define AT91_LCDC_ENA_PWMDISABLE (0 << 3)
+-#define AT91_LCDC_ENA_PWMENABLE (1 << 3)
+-
+-#define AT91_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */
+-#define AT91_LCDC_CVAL (0xff) /* PWM compare value */
+-
+-#define AT91_LCDC_IER 0x0848 /* Interrupt Enable Register */
+-#define AT91_LCDC_IDR 0x084c /* Interrupt Disable Register */
+-#define AT91_LCDC_IMR 0x0850 /* Interrupt Mask Register */
+-#define AT91_LCDC_ISR 0x0854 /* Interrupt Enable Register */
+-#define AT91_LCDC_ICR 0x0858 /* Interrupt Clear Register */
+-#define AT91_LCDC_LNI (1 << 0) /* Line Interrupt */
+-#define AT91_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */
+-#define AT91_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */
+-#define AT91_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */
+-#define AT91_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */
+-#define AT91_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */
+-
+-#define AT91_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */
+-
+-#endif
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_mci.h linux-2.6/include/asm-arm/arch-at91/at91_mci.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91_mci.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91_mci.h 2008-01-16 21:24:29.000000000 +0200
+@@ -89,7 +89,7 @@
+ #define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
+ #define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
+ #define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */
+-#define At91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B [AT91RM9200 only] */
++#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */
+ #define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
+ #define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
+ #define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_pmc.h linux-2.6/include/asm-arm/arch-at91/at91_pmc.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91_pmc.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91_pmc.h 2008-03-01 22:06:19.000000000 +0200
+@@ -25,6 +25,7 @@
+ #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+ #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
+ #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
++#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
+ #define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
+ #define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
+ #define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
+@@ -37,7 +38,9 @@
+ #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
+ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
+
+-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
++#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
++
++#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
+ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
+ #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
+ #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
+@@ -52,6 +55,10 @@
+ #define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
+ #define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
+ #define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
++#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
++#define AT91_PMC_USBDIV_1 (0 << 28)
++#define AT91_PMC_USBDIV_2 (1 << 28)
++#define AT91_PMC_USBDIV_4 (2 << 28)
+ #define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
+
+ #define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
+@@ -69,10 +76,13 @@
+ #define AT91_PMC_PRES_32 (5 << 2)
+ #define AT91_PMC_PRES_64 (6 << 2)
+ #define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
+-#define AT91_PMC_MDIV_1 (0 << 8)
+-#define AT91_PMC_MDIV_2 (1 << 8)
+-#define AT91_PMC_MDIV_3 (2 << 8)
+-#define AT91_PMC_MDIV_4 (3 << 8)
++#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */
++#define AT91RM9200_PMC_MDIV_2 (1 << 8)
++#define AT91RM9200_PMC_MDIV_3 (2 << 8)
++#define AT91RM9200_PMC_MDIV_4 (3 << 8)
++#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
++#define AT91SAM9_PMC_MDIV_2 (1 << 8)
++#define AT91SAM9_PMC_MDIV_4 (2 << 8)
+
+ #define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
+
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_rtt.h linux-2.6/include/asm-arm/arch-at91/at91_rtt.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91_rtt.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91_rtt.h 2008-02-18 18:50:29.000000000 +0200
+@@ -13,19 +13,19 @@
+ #ifndef AT91_RTT_H
+ #define AT91_RTT_H
+
+-#define AT91_RTT_MR (AT91_RTT + 0x00) /* Real-time Mode Register */
++#define AT91_RTT_MR (0x00) /* Real-time Mode Register */
+ #define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
+ #define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
+ #define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
+ #define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
+
+-#define AT91_RTT_AR (AT91_RTT + 0x04) /* Real-time Alarm Register */
++#define AT91_RTT_AR (0x04) /* Real-time Alarm Register */
+ #define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
+
+-#define AT91_RTT_VR (AT91_RTT + 0x08) /* Real-time Value Register */
++#define AT91_RTT_VR (0x08) /* Real-time Value Register */
+ #define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
+
+-#define AT91_RTT_SR (AT91_RTT + 0x0c) /* Real-time Status Register */
++#define AT91_RTT_SR (0x0c) /* Real-time Status Register */
+ #define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
+ #define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
+
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_shdwc.h linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91_shdwc.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h 2008-02-24 23:02:31.000000000 +0200
+@@ -24,10 +24,12 @@
+ #define AT91_SHDW_WKMODE0_LOW 2
+ #define AT91_SHDW_WKMODE0_ANYLEVEL 3
+ #define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */
++#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
+ #define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
+
+ #define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */
+ #define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
+ #define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */
++#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */
+
+ #endif
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91_twi.h linux-2.6/include/asm-arm/arch-at91/at91_twi.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91_twi.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91_twi.h 2008-01-16 21:24:29.000000000 +0200
+@@ -21,6 +21,8 @@
+ #define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */
+ #define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */
+ #define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */
++#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */
++#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */
+ #define AT91_TWI_SWRST (1 << 7) /* Software Reset */
+
+ #define AT91_TWI_MMR 0x04 /* Master Mode Register */
+@@ -32,6 +34,9 @@
+ #define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */
+ #define AT91_TWI_DADR (0x7f << 16) /* Device Address */
+
++#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */
++#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */
++
+ #define AT91_TWI_IADR 0x0c /* Internal Address Register */
+
+ #define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */
+@@ -43,9 +48,15 @@
+ #define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */
+ #define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */
+ #define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */
++#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */
++#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */
++#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */
+ #define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */
+ #define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */
+ #define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */
++#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */
++#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */
++#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */
+
+ #define AT91_TWI_IER 0x24 /* Interrupt Enable Register */
+ #define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91cap9.h linux-2.6/include/asm-arm/arch-at91/at91cap9.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91cap9.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91cap9.h 2008-03-01 19:37:40.000000000 +0200
+@@ -0,0 +1,126 @@
++/*
++ * include/asm-arm/arch-at91/at91cap9.h
++ *
++ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
++ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
++ * Copyright (C) 2007 Atmel Corporation.
++ *
++ * Common definitions.
++ * Based on AT91CAP9 datasheet revision B (Preliminary).
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91CAP9_H
++#define AT91CAP9_H
++
++/*
++ * Peripheral identifiers/interrupts.
++ */
++#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
++#define AT91_ID_SYS 1 /* System Peripherals */
++#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
++#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
++#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
++#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
++#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
++#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
++#define AT91CAP9_ID_US0 8 /* USART 0 */
++#define AT91CAP9_ID_US1 9 /* USART 1 */
++#define AT91CAP9_ID_US2 10 /* USART 2 */
++#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
++#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
++#define AT91CAP9_ID_CAN 13 /* CAN */
++#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
++#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
++#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
++#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
++#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
++#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
++#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
++#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
++#define AT91CAP9_ID_EMAC 22 /* Ethernet */
++#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
++#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
++#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
++#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
++#define AT91CAP9_ID_DMA 27 /* DMA Controller */
++#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
++#define AT91CAP9_ID_UHP 29 /* USB Host Port */
++#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
++#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
++
++/*
++ * User Peripheral physical base addresses.
++ */
++#define AT91CAP9_BASE_UDPHS 0xfff78000
++#define AT91CAP9_BASE_TCB0 0xfff7c000
++#define AT91CAP9_BASE_TC0 0xfff7c000
++#define AT91CAP9_BASE_TC1 0xfff7c040
++#define AT91CAP9_BASE_TC2 0xfff7c080
++#define AT91CAP9_BASE_MCI0 0xfff80000
++#define AT91CAP9_BASE_MCI1 0xfff84000
++#define AT91CAP9_BASE_TWI 0xfff88000
++#define AT91CAP9_BASE_US0 0xfff8c000
++#define AT91CAP9_BASE_US1 0xfff90000
++#define AT91CAP9_BASE_US2 0xfff94000
++#define AT91CAP9_BASE_SSC0 0xfff98000
++#define AT91CAP9_BASE_SSC1 0xfff9c000
++#define AT91CAP9_BASE_AC97C 0xfffa0000
++#define AT91CAP9_BASE_SPI0 0xfffa4000
++#define AT91CAP9_BASE_SPI1 0xfffa8000
++#define AT91CAP9_BASE_CAN 0xfffac000
++#define AT91CAP9_BASE_PWMC 0xfffb8000
++#define AT91CAP9_BASE_EMAC 0xfffbc000
++#define AT91CAP9_BASE_ADC 0xfffc0000
++#define AT91CAP9_BASE_ISI 0xfffc4000
++#define AT91_BASE_SYS 0xffffe200
++
++/*
++ * System Peripherals (offset from AT91_BASE_SYS)
++ */
++#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
++#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
++#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS)
++#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
++#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
++#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
++#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
++#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
++#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
++#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
++#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
++#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
++#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
++#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
++#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
++#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
++#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
++#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
++#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
++#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
++
++#define AT91_USART0 AT91CAP9_BASE_US0
++#define AT91_USART1 AT91CAP9_BASE_US1
++#define AT91_USART2 AT91CAP9_BASE_US2
++
++
++/*
++ * Internal Memory.
++ */
++#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
++#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
++
++#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
++#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
++
++#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
++#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
++#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
++
++#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
++
++#endif
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91cap9_ddrsdr.h linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 2008-03-01 21:29:08.000000000 +0200
+@@ -0,0 +1,100 @@
++/*
++ * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
++ *
++ * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
++ * Based on AT91CAP9 datasheet revision B.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91CAP9_DDRSDR_H
++#define AT91CAP9_DDRSDR_H
++
++#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */
++#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */
++#define AT91_DDRSDRC_MODE_NORMAL 0
++#define AT91_DDRSDRC_MODE_NOP 1
++#define AT91_DDRSDRC_MODE_PRECHARGE 2
++#define AT91_DDRSDRC_MODE_LMR 3
++#define AT91_DDRSDRC_MODE_REFRESH 4
++#define AT91_DDRSDRC_MODE_EXT_LMR 5
++#define AT91_DDRSDRC_MODE_DEEP 6
++
++#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */
++#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
++
++#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */
++#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
++#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
++#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
++#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
++#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
++#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
++#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
++#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
++#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
++#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
++#define AT91_DDRSDRC_NR_11 (0 << 2)
++#define AT91_DDRSDRC_NR_12 (1 << 2)
++#define AT91_DDRSDRC_NR_13 (2 << 2)
++#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
++#define AT91_DDRSDRC_CAS_2 (2 << 4)
++#define AT91_DDRSDRC_CAS_3 (3 << 4)
++#define AT91_DDRSDRC_CAS_25 (6 << 4)
++#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */
++#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
++
++#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */
++#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
++#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
++#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
++#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
++#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
++#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
++#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
++#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
++
++#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */
++#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
++#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
++#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
++#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
++
++#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */
++#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
++#define AT91_DDRSDRC_LPCB_DISABLE 0
++#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
++#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
++#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
++#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
++#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
++#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
++#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
++#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
++#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
++#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
++#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
++
++#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */
++#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
++#define AT91_DDRSDRC_MD_SDR 0
++#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
++#define AT91_DDRSDRC_MD_DDR 2
++#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
++
++#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */
++#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
++#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
++#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
++#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
++#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
++#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
++#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
++#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
++#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
++
++
++#endif
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91cap9_matrix.h linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91cap9_matrix.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h 2008-02-18 22:43:38.000000000 +0200
+@@ -0,0 +1,132 @@
++/*
++ * include/asm-arm/arch-at91/at91cap9_matrix.h
++ *
++ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
++ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
++ * Copyright (C) 2006 Atmel Corporation.
++ *
++ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
++ * Based on AT91CAP9 datasheet revision B (Preliminary).
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91CAP9_MATRIX_H
++#define AT91CAP9_MATRIX_H
++
++#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
++#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
++#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
++#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
++#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
++#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
++#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
++#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
++#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
++#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
++#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
++#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
++#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
++#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
++#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
++#define AT91_MATRIX_ULBT_FOUR (2 << 0)
++#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
++#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
++
++#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
++#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
++#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
++#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
++#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
++#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
++#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
++#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
++#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
++#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
++#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
++#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
++#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
++#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
++#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
++#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
++#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
++#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
++#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
++
++#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
++#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
++#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
++#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
++#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
++#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
++#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
++#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
++#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
++#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
++#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
++#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
++#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
++#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
++#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
++#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
++#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
++#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
++#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
++#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
++#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
++#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
++#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
++#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
++#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
++#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
++#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
++#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
++#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
++#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
++#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
++#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
++
++#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
++#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
++#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
++#define AT91_MATRIX_RCB2 (1 << 2)
++#define AT91_MATRIX_RCB3 (1 << 3)
++#define AT91_MATRIX_RCB4 (1 << 4)
++#define AT91_MATRIX_RCB5 (1 << 5)
++#define AT91_MATRIX_RCB6 (1 << 6)
++#define AT91_MATRIX_RCB7 (1 << 7)
++#define AT91_MATRIX_RCB8 (1 << 8)
++#define AT91_MATRIX_RCB9 (1 << 9)
++#define AT91_MATRIX_RCB10 (1 << 10)
++#define AT91_MATRIX_RCB11 (1 << 11)
++
++#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
++#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
++
++#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
++#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
++#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
++#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
++#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
++#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
++#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
++#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
++#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
++#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
++#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
++#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
++#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
++#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
++#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
++#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
++#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
++#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
++
++#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
++#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
++#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
++
++#endif
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91rm9200.h linux-2.6/include/asm-arm/arch-at91/at91rm9200.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91rm9200.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91rm9200.h 2008-02-24 19:07:01.000000000 +0200
+@@ -95,6 +95,12 @@
+
+ #define AT91_MATRIX 0 /* not supported */
+
++#define AT91_USART0 AT91RM9200_BASE_US0
++#define AT91_USART1 AT91RM9200_BASE_US1
++#define AT91_USART2 AT91RM9200_BASE_US2
++#define AT91_USART3 AT91RM9200_BASE_US3
++
++
+ /*
+ * Internal Memory.
+ */
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9260.h linux-2.6/include/asm-arm/arch-at91/at91sam9260.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9260.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91sam9260.h 2008-02-24 19:00:30.000000000 +0200
+@@ -99,6 +99,13 @@
+ #define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+ #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
++#define AT91_USART0 AT91SAM9260_BASE_US0
++#define AT91_USART1 AT91SAM9260_BASE_US1
++#define AT91_USART2 AT91SAM9260_BASE_US2
++#define AT91_USART3 AT91SAM9260_BASE_US3
++#define AT91_USART4 AT91SAM9260_BASE_US4
++#define AT91_USART5 AT91SAM9260_BASE_US5
++
+
+ /*
+ * Internal Memory.
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9260_matrix.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h 2008-01-16 21:24:29.000000000 +0200
+@@ -67,7 +67,7 @@
+ #define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+ #define AT91_MATRIX_CS4A_SMC (0 << 4)
+ #define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+-#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */
++#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+ #define AT91_MATRIX_CS5A_SMC (0 << 5)
+ #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+ #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9261.h linux-2.6/include/asm-arm/arch-at91/at91sam9261.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9261.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91sam9261.h 2008-02-24 19:00:30.000000000 +0200
+@@ -84,6 +84,10 @@
+ #define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+ #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
++#define AT91_USART0 AT91SAM9261_BASE_US0
++#define AT91_USART1 AT91SAM9261_BASE_US1
++#define AT91_USART2 AT91SAM9261_BASE_US2
++
+
+ /*
+ * Internal Memory.
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9263.h linux-2.6/include/asm-arm/arch-at91/at91sam9263.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9263.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91sam9263.h 2008-02-25 21:16:43.000000000 +0200
+@@ -101,8 +101,14 @@
+ #define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
+ #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+
++#define AT91_SDRAMC AT91_SDRAMC0
+ #define AT91_SMC AT91_SMC0
+
++#define AT91_USART0 AT91SAM9263_BASE_US0
++#define AT91_USART1 AT91SAM9263_BASE_US1
++#define AT91_USART2 AT91SAM9263_BASE_US2
++
++
+ /*
+ * Internal Memory.
+ */
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9263_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9263_matrix.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9263_matrix.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91sam9263_matrix.h 2008-02-18 22:44:20.000000000 +0200
+@@ -44,7 +44,7 @@
+ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+ #define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+ #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
++#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+ #define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+ #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+ #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_mc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_mc.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h 1970-01-01 02:00:00.000000000 +0200
+@@ -1,141 +0,0 @@
+-/*
+- * include/asm-arm/arch-at91/at91sam926x_mc.h
+- *
+- * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
+- * Based on AT91SAM9261 datasheet revision D.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- */
+-
+-#ifndef AT91SAM926x_MC_H
+-#define AT91SAM926x_MC_H
+-
+-/* SDRAM Controller (SDRAMC) registers */
+-#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
+-#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
+-#define AT91_SDRAMC_MODE_NORMAL 0
+-#define AT91_SDRAMC_MODE_NOP 1
+-#define AT91_SDRAMC_MODE_PRECHARGE 2
+-#define AT91_SDRAMC_MODE_LMR 3
+-#define AT91_SDRAMC_MODE_REFRESH 4
+-#define AT91_SDRAMC_MODE_EXT_LMR 5
+-#define AT91_SDRAMC_MODE_DEEP 6
+-
+-#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
+-#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
+-
+-#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
+-#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
+-#define AT91_SDRAMC_NC_8 (0 << 0)
+-#define AT91_SDRAMC_NC_9 (1 << 0)
+-#define AT91_SDRAMC_NC_10 (2 << 0)
+-#define AT91_SDRAMC_NC_11 (3 << 0)
+-#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+-#define AT91_SDRAMC_NR_11 (0 << 2)
+-#define AT91_SDRAMC_NR_12 (1 << 2)
+-#define AT91_SDRAMC_NR_13 (2 << 2)
+-#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
+-#define AT91_SDRAMC_NB_2 (0 << 4)
+-#define AT91_SDRAMC_NB_4 (1 << 4)
+-#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
+-#define AT91_SDRAMC_CAS_1 (1 << 5)
+-#define AT91_SDRAMC_CAS_2 (2 << 5)
+-#define AT91_SDRAMC_CAS_3 (3 << 5)
+-#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
+-#define AT91_SDRAMC_DBW_32 (0 << 7)
+-#define AT91_SDRAMC_DBW_16 (1 << 7)
+-#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
+-#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
+-#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
+-#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
+-#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
+-#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
+-
+-#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
+-#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
+-#define AT91_SDRAMC_LPCB_DISABLE 0
+-#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
+-#define AT91_SDRAMC_LPCB_POWER_DOWN 2
+-#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
+-#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
+-#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
+-#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */
+-#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
+-#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
+-#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
+-#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
+-
+-#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
+-#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
+-#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
+-#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
+-#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
+-
+-#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
+-#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
+-#define AT91_SDRAMC_MD_SDRAM 0
+-#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
+-
+-
+-/* Static Memory Controller (SMC) registers */
+-#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
+-#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
+-#define AT91_SMC_NWESETUP_(x) ((x) << 0)
+-#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
+-#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
+-#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
+-#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
+-#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
+-#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
+-
+-#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
+-#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
+-#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
+-#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
+-#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+-#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
+-#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
+-#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
+-#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+-
+-#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
+-#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
+-#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
+-#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
+-#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
+-
+-#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
+-#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
+-#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
+-#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
+-#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
+-#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
+-#define AT91_SMC_EXNWMODE_READY (3 << 4)
+-#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
+-#define AT91_SMC_BAT_SELECT (0 << 8)
+-#define AT91_SMC_BAT_WRITE (1 << 8)
+-#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
+-#define AT91_SMC_DBW_8 (0 << 12)
+-#define AT91_SMC_DBW_16 (1 << 12)
+-#define AT91_SMC_DBW_32 (2 << 12)
+-#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
+-#define AT91_SMC_TDF_(x) ((x) << 16)
+-#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
+-#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
+-#define AT91_SMC_PS (3 << 28) /* Page Size */
+-#define AT91_SMC_PS_4 (0 << 28)
+-#define AT91_SMC_PS_8 (1 << 28)
+-#define AT91_SMC_PS_16 (2 << 28)
+-#define AT91_SMC_PS_32 (3 << 28)
+-
+-#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
+-#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
+-#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
+-#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
+-#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
+-#endif
+-
+-#endif
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_sdramc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_sdramc.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_sdramc.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_sdramc.h 2008-03-01 21:17:06.000000000 +0200
+@@ -0,0 +1,83 @@
++/*
++ * include/asm-arm/arch-at91/at91sam926x_sdramc.h
++ *
++ * SDRAM Controllers (SDRAMC) - System peripherals registers.
++ * Based on AT91SAM9261 datasheet revision D.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91SAM926x_SDRAMC_H
++#define AT91SAM926x_SDRAMC_H
++
++/* SDRAM Controller (SDRAMC) registers */
++#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
++#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
++#define AT91_SDRAMC_MODE_NORMAL 0
++#define AT91_SDRAMC_MODE_NOP 1
++#define AT91_SDRAMC_MODE_PRECHARGE 2
++#define AT91_SDRAMC_MODE_LMR 3
++#define AT91_SDRAMC_MODE_REFRESH 4
++#define AT91_SDRAMC_MODE_EXT_LMR 5
++#define AT91_SDRAMC_MODE_DEEP 6
++
++#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
++#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
++
++#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
++#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
++#define AT91_SDRAMC_NC_8 (0 << 0)
++#define AT91_SDRAMC_NC_9 (1 << 0)
++#define AT91_SDRAMC_NC_10 (2 << 0)
++#define AT91_SDRAMC_NC_11 (3 << 0)
++#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
++#define AT91_SDRAMC_NR_11 (0 << 2)
++#define AT91_SDRAMC_NR_12 (1 << 2)
++#define AT91_SDRAMC_NR_13 (2 << 2)
++#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
++#define AT91_SDRAMC_NB_2 (0 << 4)
++#define AT91_SDRAMC_NB_4 (1 << 4)
++#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
++#define AT91_SDRAMC_CAS_1 (1 << 5)
++#define AT91_SDRAMC_CAS_2 (2 << 5)
++#define AT91_SDRAMC_CAS_3 (3 << 5)
++#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
++#define AT91_SDRAMC_DBW_32 (0 << 7)
++#define AT91_SDRAMC_DBW_16 (1 << 7)
++#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
++#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
++#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
++#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
++#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
++#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
++
++#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
++#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
++#define AT91_SDRAMC_LPCB_DISABLE 0
++#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
++#define AT91_SDRAMC_LPCB_POWER_DOWN 2
++#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
++#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
++#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
++#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */
++#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
++#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
++#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
++#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
++
++#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
++#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
++#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
++#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
++#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
++
++#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
++#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
++#define AT91_SDRAMC_MD_SDRAM 0
++#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
++
++
++#endif
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_smc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_smc.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91sam926x_smc.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_smc.h 2008-03-01 20:28:24.000000000 +0200
+@@ -0,0 +1,73 @@
++/*
++ * include/asm-arm/arch-at91/at91sam926x_smc.h
++ *
++ * Static Memory Controllers (SMC) - System peripherals registers.
++ * Based on AT91SAM9261 datasheet revision D.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91SAM926x_SMC_H
++#define AT91SAM926x_SMC_H
++
++#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
++#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
++#define AT91_SMC_NWESETUP_(x) ((x) << 0)
++#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
++#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
++#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
++#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
++#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
++#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
++
++#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
++#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
++#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
++#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
++#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
++#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
++#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
++#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
++#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
++
++#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
++#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
++#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
++#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
++#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
++
++#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
++#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
++#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
++#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
++#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
++#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
++#define AT91_SMC_EXNWMODE_READY (3 << 4)
++#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
++#define AT91_SMC_BAT_SELECT (0 << 8)
++#define AT91_SMC_BAT_WRITE (1 << 8)
++#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
++#define AT91_SMC_DBW_8 (0 << 12)
++#define AT91_SMC_DBW_16 (1 << 12)
++#define AT91_SMC_DBW_32 (2 << 12)
++#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
++#define AT91_SMC_TDF_(x) ((x) << 16)
++#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
++#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
++#define AT91_SMC_PS (3 << 28) /* Page Size */
++#define AT91_SMC_PS_4 (0 << 28)
++#define AT91_SMC_PS_8 (1 << 28)
++#define AT91_SMC_PS_16 (2 << 28)
++#define AT91_SMC_PS_32 (3 << 28)
++
++#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
++#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
++#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
++#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
++#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
++#endif
++
++#endif
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h 2008-02-24 19:00:30.000000000 +0200
+@@ -94,6 +94,11 @@
+ #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+ #define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
+
++#define AT91_USART0 AT91SAM9RL_BASE_US0
++#define AT91_USART1 AT91SAM9RL_BASE_US1
++#define AT91_USART2 AT91SAM9RL_BASE_US2
++#define AT91_USART3 AT91SAM9RL_BASE_US3
++
+
+ /*
+ * Internal Memory.
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9rl_matrix.h
+--- linux-2.6.24/include/asm-arm/arch-at91/at91sam9rl_matrix.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/at91sam9rl_matrix.h 2008-02-18 22:44:40.000000000 +0200
+@@ -38,7 +38,7 @@
+ #define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+ #define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+ #define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
++#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+ #define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+ #define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+ #define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/board.h linux-2.6/include/asm-arm/arch-at91/board.h
+--- linux-2.6.24/include/asm-arm/arch-at91/board.h 2008-03-01 22:02:15.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/board.h 2008-03-01 23:39:28.000000000 +0200
+@@ -34,6 +34,7 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/device.h>
+ #include <linux/i2c.h>
++#include <linux/leds.h>
+ #include <linux/spi/spi.h>
+
+ /* USB Device */
+@@ -71,7 +72,7 @@
+ };
+ extern void __init at91_add_device_eth(struct at91_eth_data *data);
+
+-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
++#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
+ #define eth_platform_data at91_eth_data
+ #endif
+
+@@ -101,13 +102,23 @@
+ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
+
+ /* Serial */
++#define ATMEL_UART_CTS 0x01
++#define ATMEL_UART_RTS 0x02
++#define ATMEL_UART_DSR 0x04
++#define ATMEL_UART_DTR 0x08
++#define ATMEL_UART_DCD 0x10
++#define ATMEL_UART_RI 0x20
++
++extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
++extern void __init at91_set_serial_console(unsigned portnr);
++
+ struct at91_uart_config {
+ unsigned short console_tty; /* tty number of serial console */
+ unsigned short nr_tty; /* number of serial tty's */
+ short tty_map[]; /* map UART to tty number */
+ };
+ extern struct platform_device *atmel_default_console_device;
+-extern void __init at91_init_serial(struct at91_uart_config *config);
++extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
+
+ struct atmel_uart_data {
+ short use_dma_tx; /* use transmit DMA? */
+@@ -116,6 +127,23 @@
+ };
+ extern void __init at91_add_device_serial(void);
+
++ /*
++ * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC
++ * platform devices. Their SSC ID is part of their configuration data,
++ * along with information about which SSC signals they should use.
++ */
++#define ATMEL_SSC_TK 0x01
++#define ATMEL_SSC_TF 0x02
++#define ATMEL_SSC_TD 0x04
++#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
++
++#define ATMEL_SSC_RK 0x10
++#define ATMEL_SSC_RF 0x20
++#define ATMEL_SSC_RD 0x40
++#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
++
++extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
++
+ /* LCD Controller */
+ struct atmel_lcdfb_info;
+ extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
+@@ -126,10 +154,12 @@
+ };
+ extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+
++ /* ISI */
++extern void __init at91_add_device_isi(void);
++
+ /* LEDs */
+-extern u8 at91_leds_cpu;
+-extern u8 at91_leds_timer;
+ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
++extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
+
+ /* FIXME: this needs a better location, but gets stuff building again */
+ extern int at91_suspend_entering_slow_clock(void);
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/cpu.h linux-2.6/include/asm-arm/arch-at91/cpu.h
+--- linux-2.6.24/include/asm-arm/arch-at91/cpu.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/cpu.h 2008-01-17 11:41:08.000000000 +0200
+@@ -21,13 +21,13 @@
+ #define ARCH_ID_AT91SAM9260 0x019803a0
+ #define ARCH_ID_AT91SAM9261 0x019703a0
+ #define ARCH_ID_AT91SAM9263 0x019607a0
++#define ARCH_ID_AT91SAM9RL64 0x019b03a0
++#define ARCH_ID_AT91CAP9 0x039A03A0
+
+ #define ARCH_ID_AT91SAM9XE128 0x329973a0
+ #define ARCH_ID_AT91SAM9XE256 0x329a93a0
+ #define ARCH_ID_AT91SAM9XE512 0x329aa3a0
+
+-#define ARCH_ID_AT91SAM9RL64 0x019b03a0
+-
+ #define ARCH_ID_AT91M40800 0x14080044
+ #define ARCH_ID_AT91R40807 0x44080746
+ #define ARCH_ID_AT91M40807 0x14080745
+@@ -81,6 +81,11 @@
+ #define cpu_is_at91sam9rl() (0)
+ #endif
+
++#ifdef CONFIG_ARCH_AT91CAP9
++#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
++#else
++#define cpu_is_at91cap9() (0)
++#endif
+
+ /*
+ * Since this is ARM, we will never run on any AVR32 CPU. But these
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/entry-macro.S linux-2.6/include/asm-arm/arch-at91/entry-macro.S
+--- linux-2.6.24/include/asm-arm/arch-at91/entry-macro.S 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/entry-macro.S 2008-01-16 21:24:29.000000000 +0200
+@@ -17,13 +17,13 @@
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
++ ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+- ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
+ ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+ ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
+ teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/hardware.h linux-2.6/include/asm-arm/arch-at91/hardware.h
+--- linux-2.6.24/include/asm-arm/arch-at91/hardware.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/hardware.h 2008-01-16 21:25:18.000000000 +0200
+@@ -26,6 +26,8 @@
+ #include <asm/arch/at91sam9263.h>
+ #elif defined(CONFIG_ARCH_AT91SAM9RL)
+ #include <asm/arch/at91sam9rl.h>
++#elif defined(CONFIG_ARCH_AT91CAP9)
++#include <asm/arch/at91cap9.h>
+ #elif defined(CONFIG_ARCH_AT91X40)
+ #include <asm/arch/at91x40.h>
+ #else
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/ics1523.h linux-2.6/include/asm-arm/arch-at91/ics1523.h
+--- linux-2.6.24/include/asm-arm/arch-at91/ics1523.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/ics1523.h 2008-01-16 21:24:29.000000000 +0200
+@@ -0,0 +1,154 @@
++//*----------------------------------------------------------------------------
++//* ATMEL Microcontroller Software Support - ROUSSET -
++//*----------------------------------------------------------------------------
++//* The software is delivered "AS IS" without warranty or condition of any
++//* kind, either express, implied or statutory. This includes without
++//* limitation any warranty or condition with respect to merchantability or
++//* fitness for any particular purpose, or against the infringements of
++//* intellectual property rights of others.
++//*----------------------------------------------------------------------------
++//* File Name : ics1523.h
++//* Object : Clock Generator Prototyping File.
++//*
++//* 1.0 08/28/02 ED : Creation
++//* 1.2 13/01/03 FB : Update on lib V3
++//*----------------------------------------------------------------------------
++
++#ifndef ics1523_h
++#define ics1523_h
++
++/*-------------------------------------------*/
++/* ICS1523 TWI Serial Clock Definition */
++/*-------------------------------------------*/
++
++#define ICS_MIN_CLOCK 100 /* Min Frequency Access Clock KHz */
++#define ICS_MAX_CLOCK 400 /* Max Frequency Access Clock KHz */
++#define ICS_TRANSFER_RATE ICS_MAX_CLOCK /* Transfer speed to apply */
++
++#define ICS_WRITE_CLK_PNB 30 /* TWCK Clock Periods required to write */
++#define ICS_READ_CLK_PNB 40 /* TWCK Clock Periods required to read */
++
++/*-------------------------------------------*/
++/* ICS1523 Write Operation Definition */
++/*-------------------------------------------*/
++
++#define ICS1523_ACCESS_OK 0 /* OK */
++#define ICS1523_ACCESS_ERROR -1 /* NOK */
++
++/*-------------------------------------------*/
++/* ICS1523 Device Addresses Definition */
++/*-------------------------------------------*/
++
++#define ICS_ADDR 0x26 /* Device Address */
++
++/*--------------------------------------------------*/
++/* ICS1523 Registers Internal Addresses Definition */
++/*--------------------------------------------------*/
++
++#define ICS_ICR 0x0 /* Input Control Register */
++#define ICS_LCR 0x1 /* Loop Control Register */
++#define ICS_FD0 0x2 /* PLL FeedBack Divider LSBs */
++#define ICS_FD1 0x3 /* PLL FeedBack Divider MSBs */
++#define ICS_DPAO 0x4 /* Dynamic Phase Aligner Offset */
++#define ICS_DPAC 0x5 /* Dynamic Phase Aligner Resolution */
++#define ICS_OE 0x6 /* Output Enables Register */
++#define ICS_OD 0x7 /* Osc Divider Register */
++#define ICS_SWRST 0x8 /* DPA & PLL Reset Register */
++#define ICS_VID 0x10 /* Chip Version Register */
++#define ICS_RID 0x11 /* Chip Revision Register */
++#define ICS_SR 0x12 /* Status Register */
++
++/*------------------------------------------------------*/
++/* ICS1523 Input Control Register Bits Definition */
++/*------------------------------------------------------*/
++
++#define ICS_PDEN 0x1 /* Phase Detector Enable */
++#define ICS_PDPOL 0x2 /* Phase Detector Enable Polarity */
++#define ICS_REFPOL 0x4 /* External Reference Polarity */
++#define ICS_FBKPOL 0x8 /* External Feedback Polarity */
++#define ICS_FBKSEL 0x10 /* External Feedback Select */
++#define ICS_FUNCSEL 0x20 /* Function Out Select */
++#define ICS_ENPLS 0x40 /* Enable PLL Lock/Ref Status Output */
++#define ICS_ENDLS 0x80 /* Enable DPA Lock/Ref Status Output */
++
++/*-----------------------------------------------------*/
++/* ICS1523 Loop Control Register Bits Definition */
++/*-----------------------------------------------------*/
++
++#define ICS_PFD 0x7 /* Phase Detector Gain */
++#define ICS_PSD 0x30 /* Post-Scaler Divider */
++
++/*----------------------------------------------------*/
++/* ICS1523 PLL FeedBack Divider LSBs Definition */
++/*----------------------------------------------------*/
++
++#define ICS_FBDL 0xFF /* PLL FeedBack Divider LSBs */
++
++/*----------------------------------------------------*/
++/* ICS1523 PLL FeedBack Divider MSBs Definition */
++/*----------------------------------------------------*/
++
++#define ICS_FBDM 0xF /* PLL FeedBack Divider MSBs */
++
++/*------------------------------------------------------------*/
++/* ICS1523 Dynamic Phase Aligner Offset Bits Definition */
++/*------------------------------------------------------------*/
++
++#define ICS_DPAOS 0x2F /* Dynamic Phase Aligner Offset */
++#define ICS_FILSEL 0x80 /* Loop Filter Select */
++
++/*----------------------------------------------------------------*/
++/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition */
++/*----------------------------------------------------------------*/
++
++#define ICS_DPARES 0x3 /* Dynamic Phase Aligner Resolution */
++#define ICS_MMREV 0xFC /* Metal Mask Revision Number */
++
++/*-------------------------------------------------------*/
++/* ICS1523 Output Enables Register Bits Definition */
++/*-------------------------------------------------------*/
++
++#define ICS_OEPCK 0x1 /* Output Enable for PECL PCLK Outputs */
++#define ICS_OETCK 0x2 /* Output Enable for STTL CLK Output */
++#define ICS_OEP2 0x4 /* Output Enable for PECL CLK/2 Outputs */
++#define ICS_OET2 0x8 /* Output Enable for STTL CLK/2 Output */
++#define ICS_OEF 0x10 /* Output Enable for STTL FUNC Output */
++#define ICS_CLK2INV 0x20 /* CLK/2 Invert */
++#define ICS_OSCL 0xC0 /* SSTL Clock Scaler */
++
++/*----------------------------------------------------*/
++/* ICS1523 Osc Divider Register Bits Definition */
++/*----------------------------------------------------*/
++
++#define ICS_OSCDIV 0x7F /* Oscillator Divider Modulus */
++#define ICS_INSEL 0x80 /* Input Select */
++
++/*---------------------------------------------------*/
++/* ICS1523 DPA & PLL Reset Register Definition */
++/*---------------------------------------------------*/
++
++#define ICS_DPAR 0x0A /* DPA Reset Command */
++#define ICS_PLLR 0x50 /* PLL Reset Command */
++
++/*------------------------------------------------*/
++/* ICS1523 Chip Version Register Definition */
++/*------------------------------------------------*/
++
++#define ICS_CHIPV 0xFF /* Chip Version */
++
++/*-------------------------------------------------*/
++/* ICS1523 Chip Revision Register Definition */
++/*-------------------------------------------------*/
++
++#define ICS_CHIPR 0xFF /* Chip Revision */
++
++/*------------------------------------------*/
++/* ICS1523 Status Register Definition */
++/*------------------------------------------*/
++
++#define ICS_DPALOCK 0x1 /* DPA Lock Status */
++#define ICS_PLLLOCK 0x2 /* PLL Lock Status */
++
++int at91_ics1523_init(void);
++
++#endif /* ics1523_h */
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/spi.h linux-2.6/include/asm-arm/arch-at91/spi.h
+--- linux-2.6.24/include/asm-arm/arch-at91/spi.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/spi.h 2008-01-16 21:24:29.000000000 +0200
+@@ -0,0 +1,54 @@
++/*
++ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
++ *
++ * (c) SAN People (Pty) Ltd
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifndef AT91_LEGACY_SPI_H
++#define AT91_LEGACY_SPI_H
++
++#define SPI_MAJOR 153 /* registered device number */
++
++#define DEFAULT_SPI_CLK 6000000
++
++
++/* Maximum number of buffers in a single SPI transfer.
++ * DataFlash uses maximum of 2
++ * spidev interface supports up to 8.
++ */
++#define MAX_SPI_TRANSFERS 8
++#define NR_SPI_DEVICES 4 /* number of devices on SPI bus */
++
++/*
++ * Describes the buffers for a SPI transfer.
++ * A transmit & receive buffer must be specified for each transfer
++ */
++struct spi_transfer_list {
++ void* tx[MAX_SPI_TRANSFERS]; /* transmit */
++ int txlen[MAX_SPI_TRANSFERS];
++ void* rx[MAX_SPI_TRANSFERS]; /* receive */
++ int rxlen[MAX_SPI_TRANSFERS];
++ int nr_transfers; /* number of transfers */
++ int curr; /* current transfer */
++};
++
++struct spi_local {
++ unsigned int pcs; /* Peripheral Chip Select value */
++
++ struct spi_transfer_list *xfers; /* current transfer list */
++ dma_addr_t tx, rx; /* DMA address for current transfer */
++ dma_addr_t txnext, rxnext; /* DMA address for next transfer */
++};
++
++
++/* Exported functions */
++extern void spi_access_bus(short device);
++extern void spi_release_bus(short device);
++extern int spi_transfer(struct spi_transfer_list* list);
++
++#endif
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/timex.h linux-2.6/include/asm-arm/arch-at91/timex.h
+--- linux-2.6.24/include/asm-arm/arch-at91/timex.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/timex.h 2008-01-16 21:25:18.000000000 +0200
+@@ -42,6 +42,11 @@
+ #define AT91SAM9_MASTER_CLOCK 100000000
+ #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
++#elif defined(CONFIG_ARCH_AT91CAP9)
++
++#define AT91CAP9_MASTER_CLOCK 100000000
++#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16)
++
+ #elif defined(CONFIG_ARCH_AT91X40)
+
+ #define AT91X40_MASTER_CLOCK 40000000
+diff -urN -x CVS linux-2.6.24/include/asm-arm/arch-at91/uncompress.h linux-2.6/include/asm-arm/arch-at91/uncompress.h
+--- linux-2.6.24/include/asm-arm/arch-at91/uncompress.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-arm/arch-at91/uncompress.h 2008-02-24 19:00:30.000000000 +0200
+@@ -22,7 +22,23 @@
+ #define __ASM_ARCH_UNCOMPRESS_H
+
+ #include <asm/io.h>
+-#include <asm/arch/at91_dbgu.h>
++#include <linux/atmel_serial.h>
++
++#if defined(CONFIG_AT91_EARLY_DBGU)
++#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
++#elif defined(CONFIG_AT91_EARLY_USART0)
++#define UART_OFFSET AT91_USART0
++#elif defined(CONFIG_AT91_EARLY_USART1)
++#define UART_OFFSET AT91_USART1
++#elif defined(CONFIG_AT91_EARLY_USART2)
++#define UART_OFFSET AT91_USART2
++#elif defined(CONFIG_AT91_EARLY_USART3)
++#define UART_OFFSET AT91_USART3
++#elif defined(CONFIG_AT91_EARLY_USART4)
++#define UART_OFFSET AT91_USART4
++#elif defined(CONFIG_AT91_EARLY_USART5)
++#define UART_OFFSET AT91_USART5
++#endif
+
+ /*
+ * The following code assumes the serial port has already been
+@@ -33,22 +49,22 @@
+ */
+ static void putc(int c)
+ {
+-#ifdef AT91_DBGU
+- void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */
++#ifdef UART_OFFSET
++ void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
+
+- while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY))
++ while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+ barrier();
+- __raw_writel(c, sys + AT91_DBGU_THR);
++ __raw_writel(c, sys + ATMEL_US_THR);
+ #endif
+ }
+
+ static inline void flush(void)
+ {
+-#ifdef AT91_DBGU
+- void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */
++#ifdef UART_OFFSET
++ void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
+
+ /* wait for transmission to complete */
+- while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY))
++ while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+ barrier();
+ #endif
+ }
+diff -urN -x CVS linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h linux-2.6/include/asm-avr32/arch-at32ap/cpu.h
+--- linux-2.6.24/include/asm-avr32/arch-at32ap/cpu.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/asm-avr32/arch-at32ap/cpu.h 2008-01-16 21:35:26.000000000 +0200
+@@ -30,5 +30,6 @@
+ #define cpu_is_at91sam9261() (0)
+ #define cpu_is_at91sam9263() (0)
+ #define cpu_is_at91sam9rl() (0)
++#define cpu_is_at91cap9() (0)
+
+ #endif /* __ASM_ARCH_CPU_H */
+diff -urN -x CVS linux-2.6.24/include/linux/atmel_serial.h linux-2.6/include/linux/atmel_serial.h
+--- linux-2.6.24/include/linux/atmel_serial.h 1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6/include/linux/atmel_serial.h 2008-02-24 19:00:30.000000000 +0200
+@@ -0,0 +1,127 @@
++/*
++ * include/linux/atmel_serial.h
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * USART registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef ATMEL_SERIAL_H
++#define ATMEL_SERIAL_H
++
++#define ATMEL_US_CR 0x00 /* Control Register */
++#define ATMEL_US_RSTRX (1 << 2) /* Reset Receiver */
++#define ATMEL_US_RSTTX (1 << 3) /* Reset Transmitter */
++#define ATMEL_US_RXEN (1 << 4) /* Receiver Enable */
++#define ATMEL_US_RXDIS (1 << 5) /* Receiver Disable */
++#define ATMEL_US_TXEN (1 << 6) /* Transmitter Enable */
++#define ATMEL_US_TXDIS (1 << 7) /* Transmitter Disable */
++#define ATMEL_US_RSTSTA (1 << 8) /* Reset Status Bits */
++#define ATMEL_US_STTBRK (1 << 9) /* Start Break */
++#define ATMEL_US_STPBRK (1 << 10) /* Stop Break */
++#define ATMEL_US_STTTO (1 << 11) /* Start Time-out */
++#define ATMEL_US_SENDA (1 << 12) /* Send Address */
++#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */
++#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */
++#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */
++#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */
++#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */
++#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */
++#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */
++
++#define ATMEL_US_MR 0x04 /* Mode Register */
++#define ATMEL_US_USMODE (0xf << 0) /* Mode of the USART */
++#define ATMEL_US_USMODE_NORMAL 0
++#define ATMEL_US_USMODE_RS485 1
++#define ATMEL_US_USMODE_HWHS 2
++#define ATMEL_US_USMODE_MODEM 3
++#define ATMEL_US_USMODE_ISO7816_T0 4
++#define ATMEL_US_USMODE_ISO7816_T1 6
++#define ATMEL_US_USMODE_IRDA 8
++#define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */
++#define ATMEL_US_USCLKS_MCK (0 << 4)
++#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4)
++#define ATMEL_US_USCLKS_SCK (3 << 4)
++#define ATMEL_US_CHRL (3 << 6) /* Character Length */
++#define ATMEL_US_CHRL_5 (0 << 6)
++#define ATMEL_US_CHRL_6 (1 << 6)
++#define ATMEL_US_CHRL_7 (2 << 6)
++#define ATMEL_US_CHRL_8 (3 << 6)
++#define ATMEL_US_SYNC (1 << 8) /* Synchronous Mode Select */
++#define ATMEL_US_PAR (7 << 9) /* Parity Type */
++#define ATMEL_US_PAR_EVEN (0 << 9)
++#define ATMEL_US_PAR_ODD (1 << 9)
++#define ATMEL_US_PAR_SPACE (2 << 9)
++#define ATMEL_US_PAR_MARK (3 << 9)
++#define ATMEL_US_PAR_NONE (4 << 9)
++#define ATMEL_US_PAR_MULTI_DROP (6 << 9)
++#define ATMEL_US_NBSTOP (3 << 12) /* Number of Stop Bits */
++#define ATMEL_US_NBSTOP_1 (0 << 12)
++#define ATMEL_US_NBSTOP_1_5 (1 << 12)
++#define ATMEL_US_NBSTOP_2 (2 << 12)
++#define ATMEL_US_CHMODE (3 << 14) /* Channel Mode */
++#define ATMEL_US_CHMODE_NORMAL (0 << 14)
++#define ATMEL_US_CHMODE_ECHO (1 << 14)
++#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14)
++#define ATMEL_US_CHMODE_REM_LOOP (3 << 14)
++#define ATMEL_US_MSBF (1 << 16) /* Bit Order */
++#define ATMEL_US_MODE9 (1 << 17) /* 9-bit Character Length */
++#define ATMEL_US_CLKO (1 << 18) /* Clock Output Select */
++#define ATMEL_US_OVER (1 << 19) /* Oversampling Mode */
++#define ATMEL_US_INACK (1 << 20) /* Inhibit Non Acknowledge */
++#define ATMEL_US_DSNACK (1 << 21) /* Disable Successive NACK */
++#define ATMEL_US_MAX_ITER (7 << 24) /* Max Iterations */
++#define ATMEL_US_FILTER (1 << 28) /* Infrared Receive Line Filter */
++
++#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */
++#define ATMEL_US_RXRDY (1 << 0) /* Receiver Ready */
++#define ATMEL_US_TXRDY (1 << 1) /* Transmitter Ready */
++#define ATMEL_US_RXBRK (1 << 2) /* Break Received / End of Break */
++#define ATMEL_US_ENDRX (1 << 3) /* End of Receiver Transfer */
++#define ATMEL_US_ENDTX (1 << 4) /* End of Transmitter Transfer */
++#define ATMEL_US_OVRE (1 << 5) /* Overrun Error */
++#define ATMEL_US_FRAME (1 << 6) /* Framing Error */
++#define ATMEL_US_PARE (1 << 7) /* Parity Error */
++#define ATMEL_US_TIMEOUT (1 << 8) /* Receiver Time-out */
++#define ATMEL_US_TXEMPTY (1 << 9) /* Transmitter Empty */
++#define ATMEL_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */
++#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */
++#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */
++#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */
++#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */
++#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */
++#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */
++#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */
++#define ATMEL_US_RI (1 << 20) /* RI */
++#define ATMEL_US_DSR (1 << 21) /* DSR */
++#define ATMEL_US_DCD (1 << 22) /* DCD */
++#define ATMEL_US_CTS (1 << 23) /* CTS */
++
++#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */
++#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */
++#define ATMEL_US_CSR 0x14 /* Channel Status Register */
++#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */
++#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */
++#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */
++
++#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
++#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */
++
++#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */
++#define ATMEL_US_TO (0xffff << 0) /* Time-out Value */
++
++#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */
++#define ATMEL_US_TG (0xff << 0) /* Timeguard Value */
++
++#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */
++#define ATMEL_US_NER 0x44 /* Number of Errors Register */
++#define ATMEL_US_IF 0x4c /* IrDA Filter Register */
++
++#endif
+diff -urN -x CVS linux-2.6.24/include/linux/clk.h linux-2.6/include/linux/clk.h
+--- linux-2.6.24/include/linux/clk.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/linux/clk.h 2007-12-31 10:44:34.000000000 +0200
+@@ -121,4 +121,24 @@
+ */
+ struct clk *clk_get_parent(struct clk *clk);
+
++/**
++ * clk_must_disable - report whether a clock's users must disable it
++ * @clk: one node in the clock tree
++ *
++ * This routine returns true only if the upcoming system state requires
++ * disabling the specified clock.
++ *
++ * It's common for platform power states to constrain certain clocks (and
++ * their descendants) to be unavailable, while other states allow that
++ * clock to be active. A platform's power states often include an "all on"
++ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and
++ * operating states which sacrifice functionality for lower power usage.
++ *
++ * The constraint value is commonly tested in device driver suspend(), to
++ * leave clocks active if they are needed for features like wakeup events.
++ * On platforms that support reduced functionality operating states, the
++ * constraint may also need to be tested during resume() and probe() calls.
++ */
++int clk_must_disable(struct clk *clk);
++
+ #endif
+diff -urN -x CVS linux-2.6.24/include/linux/i2c-id.h linux-2.6/include/linux/i2c-id.h
+--- linux-2.6.24/include/linux/i2c-id.h 2008-03-01 22:02:17.000000000 +0200
++++ linux-2.6/include/linux/i2c-id.h 2008-01-16 13:15:35.000000000 +0200
+@@ -211,6 +211,7 @@
+
+ /* --- PCA 9564 based algorithms */
+ #define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */
++#define I2C_HW_A_PLAT 0x1a0001 /* generic platform_bus interface */
+
+ /* --- ACPI Embedded controller algorithms */
+ #define I2C_HW_ACPI_EC 0x1f0000
+diff -urN -x CVS linux-2.6.24/include/video/atmel_lcdc.h linux-2.6/include/video/atmel_lcdc.h
+--- linux-2.6.24/include/video/atmel_lcdc.h 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/include/video/atmel_lcdc.h 2008-02-25 22:45:57.000000000 +0200
+@@ -22,7 +22,7 @@
+ #ifndef __ATMEL_LCDC_H__
+ #define __ATMEL_LCDC_H__
+
+- /* LCD Controller info data structure */
++ /* LCD Controller info data structure, stored in device platform_data */
+ struct atmel_lcdfb_info {
+ spinlock_t lock;
+ struct fb_info *info;
+@@ -33,7 +33,15 @@
+ struct platform_device *pdev;
+ struct clk *bus_clk;
+ struct clk *lcdc_clk;
+- unsigned int default_bpp;
++
++#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
++ struct backlight_device *backlight;
++ u8 bl_power;
++#endif
++ bool lcdcon_is_backlight;
++ u8 saved_lcdcon;
++
++ u8 default_bpp;
+ unsigned int default_lcdcon2;
+ unsigned int default_dmacon;
+ void (*atmel_lcdfb_power_control)(int on);
+diff -urN -x CVS linux-2.6.24/sound/soc/at91/eti_b1_wm8731.c linux-2.6/sound/soc/at91/eti_b1_wm8731.c
+--- linux-2.6.24/sound/soc/at91/eti_b1_wm8731.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6/sound/soc/at91/eti_b1_wm8731.c 2008-03-01 22:06:40.000000000 +0200
+@@ -34,8 +34,7 @@
+ #include <sound/soc.h>
+ #include <sound/soc-dapm.h>
+
+-#include <asm/arch/hardware.h>
+-#include <asm/arch/at91_pio.h>
++#include <asm/hardware.h>
+ #include <asm/arch/gpio.h>
+
+ #include "../codecs/wm8731.h"
+@@ -48,13 +47,6 @@
+ #define DBG(x...)
+ #endif
+
+-#define AT91_PIO_TF1 (1 << (AT91_PIN_PB6 - PIN_BASE) % 32)
+-#define AT91_PIO_TK1 (1 << (AT91_PIN_PB7 - PIN_BASE) % 32)
+-#define AT91_PIO_TD1 (1 << (AT91_PIN_PB8 - PIN_BASE) % 32)
+-#define AT91_PIO_RD1 (1 << (AT91_PIN_PB9 - PIN_BASE) % 32)
+-#define AT91_PIO_RK1 (1 << (AT91_PIN_PB10 - PIN_BASE) % 32)
+-#define AT91_PIO_RF1 (1 << (AT91_PIN_PB11 - PIN_BASE) % 32)
+-
+ static struct clk *pck1_clk;
+ static struct clk *pllb_clk;
+
+@@ -277,7 +269,6 @@
+ static int __init eti_b1_init(void)
+ {
+ int ret;
+- u32 ssc_pio_lines;
+ struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
+
+ if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
+@@ -311,19 +302,12 @@
+ goto fail_io_unmap;
+ }
+
+- ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1
+- | AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1;
+-
+- /* Reset all PIO registers and assign lines to peripheral A */
+- at91_sys_write(AT91_PIOB + PIO_PDR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_ODR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_IDR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_ASR, ssc_pio_lines);
+- at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines);
++ at91_set_A_periph(AT91_PIN_PB6, 0); /* TF1 */
++ at91_set_A_periph(AT91_PIN_PB7, 0); /* TK1 */
++ at91_set_A_periph(AT91_PIN_PB8, 0); /* TD1 */
++ at91_set_A_periph(AT91_PIN_PB9, 0); /* RD1 */
++/* at91_set_A_periph(AT91_PIN_PB10, 0);*/ /* RK1 */
++ at91_set_A_periph(AT91_PIN_PB11, 0); /* RF1 */
+
+ /*
+ * Set PCK1 parent to PLLB and its rate to 12 Mhz.
+diff -urN -x CVS linux-2.6.24/sound/spi/at73c213.c linux-2.6/sound/spi/at73c213.c
+--- linux-2.6.24/sound/spi/at73c213.c 2008-03-01 22:02:18.000000000 +0200
++++ linux-2.6/sound/spi/at73c213.c 2008-02-26 20:37:07.000000000 +0200
+@@ -112,7 +112,11 @@
+ static struct snd_pcm_hardware snd_at73c213_playback_hw = {
+ .info = SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
++#ifdef __BIG_ENDIAN
+ .formats = SNDRV_PCM_FMTBIT_S16_BE,
++#else
++ .formats = SNDRV_PCM_FMTBIT_S16_LE,
++#endif
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 8000, /* Replaced by chip->bitrate later. */
+ .rate_max = 50000, /* Replaced by chip->bitrate later. */