summaryrefslogtreecommitdiffstats
path: root/target/device/Atmel/u-boot/Config.in
diff options
context:
space:
mode:
Diffstat (limited to 'target/device/Atmel/u-boot/Config.in')
-rw-r--r--target/device/Atmel/u-boot/Config.in115
1 files changed, 28 insertions, 87 deletions
diff --git a/target/device/Atmel/u-boot/Config.in b/target/device/Atmel/u-boot/Config.in
index edefb52bb..62988ebe4 100644
--- a/target/device/Atmel/u-boot/Config.in
+++ b/target/device/Atmel/u-boot/Config.in
@@ -1,103 +1,44 @@
-config BR2_TARGET_U_BOOT
- bool "u-boot"
+config BR2_TARGET_UBOOT
+ bool "Das U-Boot Boot Monitor"
+ depends on BR2_TARGET_AT91
+ depends on !BR2_TARGET_AT91SAM9260PF
default n
- depends on BR2_avr32 || BR2_arm || BR2_armeb || BR2_i386 || BR2_powerpc || BR2_m68k || BR2_mips || BR2_nios2
help
- U-Boot, the universal boot loader for multiple platforms and target
- boards.
+ Build "Das U-Boot" Boot Monitor
- http://www.denx.de/wiki/UBoot/
-
-config BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE
- string "U-Boot config header file"
- depends on BR2_TARGET_U_BOOT
- help
- Set this variable to a file containing a U-Boot configuration for the
- target board. This file will be copied into the U-Boot directory
- include/configs.
-
-config BR2_TARGET_U_BOOT_CONFIG_BOARD
- string "U-Boot target board configuration"
- depends on BR2_TARGET_U_BOOT
+config BR2_TARGET_UBOOT_SERVERIP
+ string "server ip"
+ depends on BR2_TARGET_UBOOT
+ default "10.175.196.221"
help
- Set this variable to the target board you want to configure U-Boot
- for. This will use the default options for this board in U-Boot and
- build accordingly.
-
- For example "atstk1002_config" for ATSTK1000 with ATSTK1002 top
- module for the AVR32 starter kit.
+ TFTP server ip address
-config BR2_TARGET_U_BOOT_SERVERIP
- string "Server IP"
- depends on BR2_TARGET_U_BOOT
- default "192.168.0.1"
+config BR2_TARGET_UBOOT_IPADDR
+ string "ip address"
+ depends on BR2_TARGET_UBOOT
+ default "10.175.196.18"
help
- The IP address for the remote server providing TFTP services.
+ TFTP server ip address
-config BR2_TARGET_U_BOOT_IPADDR
- string "Target IP address"
- depends on BR2_TARGET_U_BOOT
- default "192.168.0.42"
+config BR2_TARGET_UBOOT_GATEWAY
+ string "gateway ip"
+ depends on BR2_TARGET_UBOOT
+ default "10.175.196.1"
help
- Target board IP address, only set this if you intend to use a fixed
- address (i.e. no DHCP). A blanc target IP address will allow the
- board to use DHCP.
+ Gateway ip address
-config BR2_TARGET_U_BOOT_GATEWAY
- string "Gateway IP"
- depends on BR2_TARGET_U_BOOT && BR2_TARGET_U_BOOT_IPADDR != ""
- default "192.168.0.1"
- help
- Set the gateway IP address if you need to connect to a machine
- outside the netmask for the network.
-
-config BR2_TARGET_U_BOOT_NETMASK
+config BR2_TARGET_UBOOT_NETMASK
string "netmask"
- depends on BR2_TARGET_U_BOOT && BR2_TARGET_U_BOOT_IPADDR != ""
+ depends on BR2_TARGET_UBOOT
default "255.255.255.0"
help
- Network mask for the target board network.
-
-config BR2_TARGET_U_BOOT_ETH0ADDR
- string "Ethernet 0 address"
- depends on BR2_TARGET_U_BOOT
- help
- Target board MAC address for interface 0. You should have a MAC
- address range provided by the company who made you MAC hardware.
-
-config BR2_TARGET_U_BOOT_ETH1ADDR
- string "Ethernet 1 address"
- depends on BR2_TARGET_U_BOOT
- help
- Target board MAC address for interface 1. You should have a MAC
- address range provided by the company who made you MAC hardware.
-
-config BR2_TARGET_U_BOOT_BOOTARGS
- string "Boot arguments"
- depends on BR2_TARGET_U_BOOT
- default "console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
- help
- Set the boot arguments in U-Boot to let it boot the way you prefer by
- default. Typoes here will result in a non-booting target board.
-
- Example booting from MMC/SD-card:
- console=ttyS0 root=/dev/mmcblk0p1
-
- Example booting from flash devices (NOR, NAND, DataFlash, etc):
- console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2
+ Network Mask
-config BR2_TARGET_U_BOOT_BOOTCMD
- string "Boot command"
- depends on BR2_TARGET_U_BOOT
- default "fsload /boot/$(LINUX26_FORMAT); bootm"
+config BR2_TARGET_UBOOT_ETHADDR
+ string "Ethernet address"
+ depends on BR2_TARGET_UBOOT
+ default "04:25:fe:ed:00:18"
help
- Set the boot command in U-Boot which specifies how U-Boot should load
- your kernel image, or if you want to do other commands automatically
- when U-Boot starts.
+ Target ip address, this should be changed for production units
- Loading a kernel from MMC/SD-card:
- mmcinit; ext2load mmc 0:1 <RAM address>
- /boot/$(BR2_PACKAGE_LINUX_FORMAT); bootm
- Loading a kernel from flash devices (NOR, NAND, DataFlash, etc):
- fsload <RAM address> /boot/$(BR2_PACKAGE_LINUX_FORMAT); bootm