summaryrefslogtreecommitdiffstats
path: root/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-005-at91sam9g20ek.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-005-at91sam9g20ek.patch')
-rw-r--r--target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-005-at91sam9g20ek.patch801
1 files changed, 0 insertions, 801 deletions
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-005-at91sam9g20ek.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-005-at91sam9g20ek.patch
deleted file mode 100644
index b87a655e6..000000000
--- a/target/device/Atmel/arch-arm/u-boot/2009.01-rc3/u-boot-2009.01-rc1-005-at91sam9g20ek.patch
+++ /dev/null
@@ -1,801 +0,0 @@
-diff -urN u-boot-2008.10-0rig/Makefile u-boot-2008.10/Makefile
---- u-boot-2008.10-0rig/Makefile 2008-12-28 14:07:30.000000000 +0100
-+++ u-boot-2008.10/Makefile 2008-12-28 14:06:28.000000000 +0100
-@@ -2541,6 +2541,22 @@
- fi;
- @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
-
-+at91sam9g20ek_nandflash_config \
-+at91sam9g20ek_dataflash_cs0_config \
-+at91sam9g20ek_dataflash_cs1_config \
-+at91sam9g20ek_config : unconfig
-+ @if [ "$(findstring _nandflash,$@)" ] ; then \
-+ echo "#define CONFIG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
-+ $(XECHO) "... with environment variable in NAND FLASH" ; \
-+ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
-+ echo "#define CONFIG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
-+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
-+ else \
-+ echo "#define CONFIG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
-+ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
-+ fi;
-+ @$(MKCONFIG) -a at91sam9g20ek arm arm926ejs at91sam9g20ek atmel at91
-+
- at91sam9261ek_nandflash_config \
- at91sam9261ek_dataflash_cs0_config \
- at91sam9261ek_dataflash_cs3_config \
-Index: include/configs/at91sam9g20ek.h
-===================================================================
---- a/include/configs/at91sam9g20ek.h (.../u-boot-1.3.4) (revision 0)
-+++ b/include/configs/at91sam9g20ek.h (.../u-boot-1.3.4-exp) (revision 8417)
-@@ -0,0 +1,198 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * Configuation settings for the AT91SAM9G20EK board.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+/* ARM asynchronous clock */
-+#define AT91_MAIN_CLOCK 396288000 /* from 18.432 MHz crystal */
-+#define AT91_MASTER_CLOCK 132096000 /* peripheral = main / 3 */
-+#define CONFIG_SYS_HZ 1000000 /* 1us resolution */
-+
-+#define AT91_SLOW_CLOCK 32768 /* slow clock */
-+
-+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-+#define CONFIG_AT91SAM9G20 1 /* It's an Atmel AT91SAM9G20 SoC*/
-+#define CONFIG_AT91SAM9G20EK 1 /* on an AT91SAM9G20EK Board */
-+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-+
-+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_INITRD_TAG 1
-+
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SKIP_RELOCATE_UBOOT
-+
-+/*
-+ * Hardware drivers
-+ */
-+#define CONFIG_ATMEL_USART 1
-+#undef CONFIG_USART0
-+#undef CONFIG_USART1
-+#undef CONFIG_USART2
-+#define CONFIG_USART3 1 /* USART 3 is DBGU */
-+
-+#define CONFIG_BOOTDELAY 3
-+
-+/*
-+ * BOOTP options
-+ */
-+#define CONFIG_BOOTP_BOOTFILESIZE 1
-+#define CONFIG_BOOTP_BOOTPATH 1
-+#define CONFIG_BOOTP_GATEWAY 1
-+#define CONFIG_BOOTP_HOSTNAME 1
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+#undef CONFIG_CMD_BDI
-+#undef CONFIG_CMD_IMI
-+#undef CONFIG_CMD_AUTOSCRIPT
-+#undef CONFIG_CMD_FPGA
-+#undef CONFIG_CMD_LOADS
-+#undef CONFIG_CMD_IMLS
-+
-+#define CONFIG_CMD_PING 1
-+#define CONFIG_CMD_DHCP 1
-+#define CONFIG_CMD_NAND
-+#define CONFIG_CMD_USB 1
-+
-+/* SDRAM */
-+#define CONFIG_NR_DRAM_BANKS 1
-+#define PHYS_SDRAM 0x20000000
-+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-+
-+/* DataFlash */
-+#define CONFIG_HAS_DATAFLASH 1
-+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
-+#define AT91_SPI_CLK 15000000
-+#define DATAFLASH_TCSS (0x22 << 16)
-+#define DATAFLASH_TCHS (0x1 << 24)
-+#define AT91SAM9260_BASE_SPI0 0xfffc8000
-+/* NAND flash */
-+#define NAND_MAX_CHIPS 1
-+#define CONFIG_SYS_MAX_NAND_DEVICE 1
-+#define CONFIG_SYS_NAND_BASE 0x40000000
-+#define CONFIG_SYS_NAND_DBW_8 1
-+
-+/* NOR flash - no real flash on this board */
-+#define CONFIG_SYS_NO_FLASH 1
-+
-+/* Ethernet */
-+#define CONFIG_MACB 1
-+#define CONFIG_RMII 1
-+#define CONFIG_NET_MULTI 1
-+#define CONFIG_NET_RETRY_COUNT 20
-+#define CONFIG_RESET_PHY_R 1
-+#define AT91SAM9260_BASE_EMAC 0xfffc4000
-+/* USB */
-+#define CONFIG_USB_OHCI_NEW 1
-+#define LITTLEENDIAN 1
-+#define CONFIG_DOS_PARTITION 1
-+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9G20_UHP_BASE */
-+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g20"
-+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-+#define CONFIG_USB_STORAGE 1
-+
-+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-+
-+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-+#define CONFIG_SYS_MEMTEST_END 0x23e00000
-+
-+#ifdef CONFIG_USE_DATAFLASH_CS0
-+
-+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-+#define CONFIG_ENV_IS_IN_DATAFLASH 1
-+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-+#define CONFIG_ENV_OFFSET 0x4200
-+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE 0x4200
-+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
-+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
-+ "root=/dev/mtdblock0 " \
-+ "mtdparts=at91_nand:-(root) " \
-+ "rw rootfstype=jffs2"
-+
-+#elif CONFIG_USE_DATAFLASH_CS1
-+
-+/* bootstrap + u-boot + env + linux in dataflash on CS1 */
-+#define CONFIG_ENV_IS_IN_DATAFLASH 1
-+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
-+#define CONFIG_ENV_OFFSET 0x4200
-+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE 0x4200
-+#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm"
-+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
-+ "root=/dev/mtdblock0 " \
-+ "mtdparts=at91_nand:-(root) " \
-+ "rw rootfstype=jffs2"
-+
-+#else /* CONFIG_USE_NANDFLASH */
-+
-+/* bootstrap + u-boot + env + linux in nandflash */
-+#define CONFIG_ENV_IS_IN_NAND 1
-+#define CONFIG_ENV_OFFSET 0x60000
-+#define CONFIG_ENV_OFFSET_REDUND 0x80000
-+#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
-+#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
-+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
-+ "root=/dev/mtdblock5 " \
-+ "mtdparts=at91_nand:128k(bootstrap)ro," \
-+ "256k(uboot)ro,128k(env1)ro," \
-+ "128k(env2)ro,2M(linux),-(root) " \
-+ "rw rootfstype=jffs2"
-+
-+#endif
-+
-+#define CONFIG_BAUDRATE 115200
-+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-+
-+#define CONFIG_SYS_PROMPT "U-Boot> "
-+#define CONFIG_SYS_CBSIZE 256
-+#define CONFIG_SYS_MAXARGS 16
-+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-+#define CONFIG_SYS_LONGHELP 1
-+#define CONFIG_CMDLINE_EDITING 1
-+
-+#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
-+
-+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-+
-+#ifdef CONFIG_USE_IRQ
-+#error CONFIG_USE_IRQ not supported
-+#endif
-+
-+#endif
-Index: board/atmel/at91sam9g20ek/nand.c
-===================================================================
---- a/board/atmel/at91sam9g20ek/nand.c (.../u-boot-1.3.4) (revision 0)
-+++ b/board/atmel/at91sam9g20ek/nand.c (.../u-boot-1.3.4-exp) (revision 8417)
-@@ -0,0 +1,78 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/at91sam9260.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91_pio.h>
-+
-+#include <nand.h>
-+
-+/*
-+ * hardware specific access to control-lines
-+ */
-+#define MASK_ALE (1 << 21) /* our ALE is AD21 */
-+#define MASK_CLE (1 << 22) /* our CLE is AD22 */
-+
-+static void at91sam9g20ek_nand_hwcontrol(struct mtd_info *mtd,
-+ int cmd, unsigned int ctrl)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ if (ctrl & NAND_CTRL_CHANGE) {
-+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
-+ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
-+
-+ if (ctrl & NAND_CLE)
-+ IO_ADDR_W |= MASK_CLE;
-+ if (ctrl & NAND_ALE)
-+ IO_ADDR_W |= MASK_ALE;
-+
-+ at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE));
-+ this->IO_ADDR_W = (void *) IO_ADDR_W;
-+ }
-+
-+ if (cmd != NAND_CMD_NONE)
-+ writeb(cmd, this->IO_ADDR_W);
-+}
-+
-+static int at91sam9g20ek_nand_ready(struct mtd_info *mtd)
-+{
-+ return at91_get_gpio_value(AT91_PIN_PC13);
-+}
-+
-+int board_nand_init(struct nand_chip *nand)
-+{
-+ nand->ecc.mode = NAND_ECC_SOFT;
-+#ifdef CONFIG_SYS_NAND_DBW_16
-+ nand->options = NAND_BUSWIDTH_16;
-+#endif
-+ nand->cmd_ctrl = at91sam9g20ek_nand_hwcontrol;
-+ nand->dev_ready = at91sam9g20ek_nand_ready;
-+ nand->chip_delay = 20;
-+
-+ return 0;
-+}
-Index: board/atmel/at91sam9g20ek/at91sam9g20ek.c
-===================================================================
---- a/board/atmel/at91sam9g20ek/at91sam9g20ek.c (.../u-boot-1.3.4) (revision 0)
-+++ b/board/atmel/at91sam9g20ek/at91sam9g20ek.c (.../u-boot-1.3.4-exp) (revision 8417)
-@@ -0,0 +1,250 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/at91sam9260.h>
-+#include <asm/arch/at91sam9260_matrix.h>
-+#include <asm/arch/at91sam9_smc.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91_rstc.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
-+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-+#include <net.h>
-+#endif
-+#include <netdev.h>
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+/* ------------------------------------------------------------------------- */
-+/*
-+ * Miscelaneous platform dependent initialisations
-+ */
-+
-+static void at91sam9g20ek_serial_hw_init(void)
-+{
-+#ifdef CONFIG_USART0
-+ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
-+ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
-+#endif
-+
-+#ifdef CONFIG_USART1
-+ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
-+ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
-+#endif
-+
-+#ifdef CONFIG_USART2
-+ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
-+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
-+#endif
-+
-+#ifdef CONFIG_USART3 /* DBGU */
-+ at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
-+ at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
-+#endif
-+}
-+
-+#ifdef CONFIG_CMD_NAND
-+static void at91sam9g20ek_nand_hw_init(void)
-+{
-+ unsigned long csa;
-+
-+ /* Enable CS3 */
-+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
-+ at91_sys_write(AT91_MATRIX_EBICSA,
-+ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-+
-+ /* Configure SMC CS3 for NAND/SmartMedia */
-+ at91_sys_write(AT91_SMC_SETUP(3),
-+ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
-+ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
-+ at91_sys_write(AT91_SMC_PULSE(3),
-+ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) |
-+ AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(3));
-+ at91_sys_write(AT91_SMC_CYCLE(3),
-+ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
-+ at91_sys_write(AT91_SMC_MODE(3),
-+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-+ AT91_SMC_EXNWMODE_DISABLE |
-+#ifdef CONFIG_SYS_NAND_DBW_16
-+ AT91_SMC_DBW_16 |
-+#else /* CONFIG_SYS_NAND_DBW_8 */
-+ AT91_SMC_DBW_8 |
-+#endif
-+ AT91_SMC_TDF_(3));
-+
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
-+
-+ /* Configure RDY/BSY */
-+ at91_set_gpio_input(AT91_PIN_PC13, 1);
-+
-+ /* Enable NandFlash */
-+ at91_set_gpio_output(AT91_PIN_PC14, 1);
-+}
-+#endif
-+
-+#ifdef CONFIG_HAS_DATAFLASH
-+static void at91sam9g20ek_spi_hw_init(void)
-+{
-+ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */
-+ at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */
-+
-+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
-+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
-+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-+
-+ /* Enable clock */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0);
-+}
-+#endif
-+
-+#ifdef CONFIG_MACB
-+static void at91sam9g20ek_macb_hw_init(void)
-+{
-+ /* Enable clock */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
-+
-+ /*
-+ * Disable pull-up on:
-+ * RXDV (PA17) => PHY normal mode (not Test mode)
-+ * ERX0 (PA14) => PHY ADDR0
-+ * ERX1 (PA15) => PHY ADDR1
-+ * ERX2 (PA25) => PHY ADDR2
-+ * ERX3 (PA26) => PHY ADDR3
-+ * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
-+ *
-+ * PHY has internal pull-down
-+ */
-+ writel(pin_to_mask(AT91_PIN_PA14) |
-+ pin_to_mask(AT91_PIN_PA15) |
-+ pin_to_mask(AT91_PIN_PA17) |
-+ pin_to_mask(AT91_PIN_PA25) |
-+ pin_to_mask(AT91_PIN_PA26) |
-+ pin_to_mask(AT91_PIN_PA28),
-+ pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
-+
-+ /* Need to reset PHY -> 500ms reset */
-+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
-+ (AT91_RSTC_ERSTL & (0x0D << 8)) |
-+ AT91_RSTC_URSTEN);
-+
-+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
-+
-+ /* Wait for end hardware reset */
-+ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
-+
-+ /* Restore NRST value */
-+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
-+ (AT91_RSTC_ERSTL & (0x0 << 8)) |
-+ AT91_RSTC_URSTEN);
-+
-+ /* Re-enable pull-up */
-+ writel(pin_to_mask(AT91_PIN_PA14) |
-+ pin_to_mask(AT91_PIN_PA15) |
-+ pin_to_mask(AT91_PIN_PA17) |
-+ pin_to_mask(AT91_PIN_PA25) |
-+ pin_to_mask(AT91_PIN_PA26) |
-+ pin_to_mask(AT91_PIN_PA28),
-+ pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
-+
-+ at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
-+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
-+ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
-+ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
-+ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
-+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
-+ at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
-+ at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
-+ at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
-+ at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
-+
-+#ifndef CONFIG_RMII
-+ at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
-+ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
-+ at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
-+ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
-+ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
-+#if defined(CONFIG_AT91SAM9G20EK)
-+ /*
-+ * use PA10, PA11 for ETX2, ETX3.
-+ * PA23 and PA24 are for TWI EEPROM
-+ */
-+ at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
-+ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
-+#else
-+ at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
-+ at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
-+#endif
-+ at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
-+#endif
-+
-+}
-+#endif
-+
-+int board_init(void)
-+{
-+ /* Enable Ctrlc */
-+ console_init_f();
-+
-+ /* arch number of AT91SAM9G20EK-Board */
-+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
-+ /* adress of boot parameters */
-+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-+
-+ at91sam9g20ek_serial_hw_init();
-+#ifdef CONFIG_CMD_NAND
-+ at91sam9g20ek_nand_hw_init();
-+#endif
-+#ifdef CONFIG_HAS_DATAFLASH
-+ at91sam9g20ek_spi_hw_init();
-+#endif
-+#ifdef CONFIG_MACB
-+ at91sam9g20ek_macb_hw_init();
-+#endif
-+
-+ return 0;
-+}
-+
-+int dram_init(void)
-+{
-+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
-+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-+ return 0;
-+}
-+
-+#ifdef CONFIG_RESET_PHY_R
-+void reset_phy(void)
-+{
-+#ifdef CONFIG_MACB
-+ /*
-+ * Initialize ethernet HW addr prior to starting Linux,
-+ * needed for nfsroot
-+ */
-+ eth_init(gd->bd);
-+#endif
-+}
-+#endif
-Index: board/atmel/at91sam9g20ek/led.c
-===================================================================
---- a/board/atmel/at91sam9g20ek/led.c (.../u-boot-1.3.4) (revision 0)
-+++ b/board/atmel/at91sam9g20ek/led.c (.../u-boot-1.3.4-exp) (revision 8417)
-@@ -0,0 +1,64 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/at91sam9260.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
-+
-+#define RED_LED AT91_PIN_PA9 /* this is the power led */
-+#define GREEN_LED AT91_PIN_PA6 /* this is the user led */
-+
-+void red_LED_on(void)
-+{
-+ at91_set_gpio_value(RED_LED, 1);
-+}
-+
-+void red_LED_off(void)
-+{
-+ at91_set_gpio_value(RED_LED, 0);
-+}
-+
-+void green_LED_on(void)
-+{
-+ at91_set_gpio_value(GREEN_LED, 0);
-+}
-+
-+void green_LED_off(void)
-+{
-+ at91_set_gpio_value(GREEN_LED, 1);
-+}
-+
-+void coloured_LED_init(void)
-+{
-+ /* Enable clock */
-+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
-+
-+ at91_set_gpio_output(RED_LED, 1);
-+ at91_set_gpio_output(GREEN_LED, 1);
-+
-+ at91_set_gpio_value(RED_LED, 0);
-+ at91_set_gpio_value(GREEN_LED, 1);
-+}
-Index: board/atmel/at91sam9g20ek/partition.c
-===================================================================
---- a/board/atmel/at91sam9g20ek/partition.c (.../u-boot-1.3.4) (revision 0)
-+++ b/board/atmel/at91sam9g20ek/partition.c (.../u-boot-1.3.4-exp) (revision 8417)
-@@ -0,0 +1,40 @@
-+/*
-+ * (C) Copyright 2008
-+ * Ulf Samuelsson <ulf@atmel.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ */
-+#include <common.h>
-+#include <config.h>
-+#include <asm/hardware.h>
-+#include <dataflash.h>
-+
-+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-+
-+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
-+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
-+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
-+};
-+
-+/*define the area offsets*/
-+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
-+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
-+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
-+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
-+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
-+};
-Index: board/atmel/at91sam9g20ek/config.mk
-===================================================================
---- a/board/atmel/at91sam9g20ek/config.mk (.../u-boot-1.3.4) (revision 0)
-+++ b/board/atmel/at91sam9g20ek/config.mk (.../u-boot-1.3.4-exp) (revision 8417)
-@@ -0,0 +1 @@
-+TEXT_BASE = 0x23f00000
-Index: board/atmel/at91sam9g20ek/Makefile
-===================================================================
---- a/board/atmel/at91sam9g20ek/Makefile (.../u-boot-1.3.4) (revision 0)
-+++ b/board/atmel/at91sam9g20ek/Makefile (.../u-boot-1.3.4-exp) (revision 8417)
-@@ -0,0 +1,57 @@
-+#
-+# (C) Copyright 2003-2008
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# (C) Copyright 2008
-+# Stelian Pop <stelian.pop@leadtechdesign.com>
-+# Lead Tech Design <www.leadtechdesign.com>
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = $(obj)lib$(BOARD).a
-+
-+COBJS-y += at91sam9g20ek.o
-+COBJS-y += led.o
-+COBJS-y += partition.o
-+COBJS-$(CONFIG_CMD_NAND) += nand.o
-+
-+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-+OBJS := $(addprefix $(obj),$(COBJS-y))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
-+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+ rm -f $(SOBJS) $(OBJS)
-+
-+distclean: clean
-+ rm -f $(LIB) core *.bak $(obj).depend
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-Index: include/asm-arm/arch-at91/hardware.h
-===================================================================
---- a/include/asm-arm/arch-at91/hardware.h (.../u-boot-1.3.4) (revision 8417)
-+++ b/include/asm-arm/arch-at91/hardware.h (.../u-boot-1.3.4-exp) (revision 8417)
-@@ -18,7 +18,7 @@
-
- #if defined(CONFIG_AT91RM9200)
- #include <asm/arch/at91rm9200.h>
--#elif defined(CONFIG_AT91SAM9260)
-+#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20)
- #include <asm/arch/at91sam9260.h>
- #define AT91_BASE_EMAC AT91SAM9260_BASE_EMAC
- #define AT91_BASE_SPI AT91SAM9260_BASE_SPI0
-diff -urN u-boot-2008.10-0rig/include/asm-arm/mach-types.h u-boot-2008.10/include/asm-arm/mach-types.h
---- u-boot-2008.10-0rig/include/asm-arm/mach-types.h 2008-10-18 21:30:31.000000000 +0200
-+++ u-boot-2008.10/include/asm-arm/mach-types.h 2008-12-28 23:40:55.000000000 +0100
-@@ -23998,6 +23998,18 @@
- # define machine_is_geneva() (0)
- #endif
-
-+#ifdef CONFIG_MACH_AT91SAM9G20EK
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AT91SAM9G20EK
-+# endif
-+# define machine_is_at91sam9g20ek() (machine_arch_type == MACH_TYPE_AT91SAM9G20EK)
-+#else
-+# define machine_is_at91sam9g20ek() (0)
-+#endif
-+
- /*
- * These have not yet been registered
- */
-diff -urN u-boot-2008.10-0rig/board/atmel/at91sam9g20ek/at91sam9g20ek.c u-boot-2008.10/board/atmel/at91sam9g20ek/at91sam9g20ek.c
---- u-boot-2008.10-0rig/board/atmel/at91sam9g20ek/at91sam9g20ek.c 2008-12-28 14:09:52.000000000 +0100
-+++ u-boot-2008.10/board/atmel/at91sam9g20ek/at91sam9g20ek.c 2008-12-28 23:56:09.000000000 +0100
-@@ -248,3 +248,13 @@
- #endif
- }
- #endif
-+
-+int board_eth_init(bd_t *bis)
-+{
-+ int rc = 0;
-+#ifdef CONFIG_MACB
-+ rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
-+#endif
-+ return rc;
-+}
-+