diff options
Diffstat (limited to 'target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch')
-rw-r--r-- | target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch | 309 |
1 files changed, 0 insertions, 309 deletions
diff --git a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch b/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch deleted file mode 100644 index 2e7e57822..000000000 --- a/target/device/Atmel/arch-arm/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch +++ /dev/null @@ -1,309 +0,0 @@ -diff -urN u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk_df.h u-boot-2009.01/include/configs/at91rm9200dk_df.h ---- u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk_df.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-2009.01/include/configs/at91rm9200dk_df.h 2009-01-01 21:19:30.000000000 +0100 -@@ -0,0 +1,251 @@ -+/* -+ * Rick Bronson <rick@efn.org> -+ * -+ * Configuration settings for the AT91RM9200DK board. -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+#define AT91RM9200_BOARD MACH_TYPE_AT91RM9200DK -+#define CONFIG_HOSTNAME at91rm9200dk -+ -+/* ARM asynchronous clock */ -+#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ -+#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ -+/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ -+ -+#define AT91_SLOW_CLOCK 32768 /* slow clock */ -+ -+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_AT91 1 /* THis is an ARM from the AT91 family */ -+#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -+#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ -+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -+#define USE_920T_MMU 1 -+ -+#define CONFIG_SKIP_LOWLEVEL_INIT /* Already done by dataflashboot */ -+ -+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_INITRD_TAG 1 -+ -+#ifndef CONFIG_SKIP_LOWLEVEL_INIT -+#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -+/* flash */ -+#define MC_PUIA_VAL 0x00000000 -+#define MC_PUP_VAL 0x00000000 -+#define MC_PUER_VAL 0x00000000 -+#define MC_ASR_VAL 0x00000000 -+#define MC_AASR_VAL 0x00000000 -+#define EBI_CFGR_VAL 0x00000000 -+#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ -+ -+/* clocks */ -+#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -+#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -+#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ -+ -+/* sdram */ -+#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -+#define PIOC_BSR_VAL 0x00000000 -+#define PIOC_PDR_VAL 0xFFFF0000 -+#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -+#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */ -+#define SDRAM 0x20000000 /* address of the SDRAM */ -+#define SDRAM1 0x20000080 /* address of the SDRAM */ -+#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -+#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -+#define SDRC_MR_VAL1 0x00000004 /* refresh */ -+#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -+#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -+#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -+#else -+#define CONFIG_SKIP_RELOCATE_UBOOT -+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -+/* -+ * Size of malloc() pool -+ */ -+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -+ -+#define CONFIG_BAUDRATE 115200 -+ -+/* -+ * Hardware drivers -+ */ -+ -+/* define one of these to choose the DBGU, USART0 or USART1 as console */ -+#define CONFIG_DBGU -+#undef CONFIG_USART0 -+#undef CONFIG_USART1 -+ -+#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ -+ -+#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ -+ -+#define CONFIG_BOOTDELAY 3 -+/* #define CONFIG_ENV_OVERWRITE 1 */ -+ -+ -+/* -+ * BOOTP options -+ */ -+#define CONFIG_BOOTP_BOOTFILESIZE -+#define CONFIG_BOOTP_BOOTPATH -+#define CONFIG_BOOTP_GATEWAY -+#define CONFIG_BOOTP_HOSTNAME -+ -+ -+/* -+ * Command line configuration. -+ */ -+#include <config_cmd_default.h> -+ -+#define CONFIG_CMD_DHCP -+#define CONFIG_CMD_MII -+#define CONFIG_CMD_NAND -+#define CONFIG_CMD_AT91_SPIMUX -+ -+#define CONFIG_NAND_LEGACY -+ -+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -+#define SECTORSIZE 512 -+ -+#define ADDR_COLUMN 1 -+#define ADDR_PAGE 2 -+#define ADDR_COLUMN_PAGE 3 -+ -+#define NAND_ChipID_UNKNOWN 0x00 -+#define NAND_MAX_FLOORS 1 -+#define NAND_MAX_CHIPS 1 -+ -+#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ -+#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ -+ -+#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ -+#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) -+#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) -+ -+#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2)) -+ -+#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0) -+#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0) -+#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -+#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) -+/* the following are NOP's in our implementation */ -+#define NAND_CTL_CLRALE(nandptr) -+#define NAND_CTL_SETALE(nandptr) -+#define NAND_CTL_CLRCLE(nandptr) -+#define NAND_CTL_SETCLE(nandptr) -+ -+#define CONFIG_NR_DRAM_BANKS 1 -+#define PHYS_SDRAM 0x20000000 -+#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ -+ -+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -+#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 -+ -+#define CONFIG_DRIVER_ETHER -+#define CONFIG_NET_RETRY_COUNT 20 -+#define CONFIG_AT91C_USE_RMII -+ -+/* AC Characteristics */ -+/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ -+#define DATAFLASH_TCSS (0xC << 16) -+#define DATAFLASH_TCHS (0x1 << 24) -+ -+#define CONFIG_HAS_DATAFLASH 1 -+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) -+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 -+#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384 -+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ -+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ -+#define CONFIG__SUPPORT_BLOCK_ERASE 1 -+ -+ -+#define PHYS_FLASH_1 0x10000000 -+#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */ -+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -+#define CONFIG_SYS_MAX_FLASH_BANKS 1 -+#define CONFIG_SYS_MAX_FLASH_SECT 256 -+#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -+#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ -+ -+#define CONFIG_ENV_IS_IN_DATAFLASH 1 -+#define CONFIG_NEW_PARTITION 1 -+ -+#ifdef CONFIG_ENV_IS_IN_DATAFLASH -+#ifdef CONFIG_NEW_PARTITION -+#define CONFIG_ENV_OFFSET 0x4200 -+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -+#define CONFIG_ENV_SIZE 0x2000 /* 8 * 1056 really , but start.s is not OK with this*/ -+#else -+#define CONFIG_ENV_OFFSET 0x20000 -+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -+#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ -+#endif -+#else -+#define CONFIG_ENV_IS_IN_FLASH 1 -+#ifdef CONFIG_SKIP_LOWLEVEL_INIT -+#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ -+#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */ -+#else -+#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ -+#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */ -+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -+#endif /* CONFIG_ENV_IS_IN_DATAFLASH */ -+ -+#if defined(CONFIG_AT91RM9200DK) -+#define DATAFLASH_MMC_SELECT AT91_PIN_PB7 -+#else -+#define DATAFLASH_MMC_SELECT AT91_PIN_PB22 -+#endif -+ -+#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ -+ -+#ifdef CONFIG_SKIP_LOWLEVEL_INIT -+#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */ -+#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) -+#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */ -+#else -+#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ -+#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 -+#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */ -+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -+ -+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 } -+ -+#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ -+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -+ -+#define CONFIG_SYS_HZ 1000 -+#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ -+ /* AT91C_TC_TIMER_DIV1_CLOCK */ -+ -+#define CONFIG_STACKSIZE (32*1024) /* regular stack */ -+ -+#ifdef CONFIG_USE_IRQ -+#error CONFIG_USE_IRQ not supported -+#endif -+ -+#endif -diff -urN u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk.h u-boot-2009.01/include/configs/at91rm9200dk.h ---- u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk.h 2009-01-01 13:09:35.000000000 +0100 -+++ u-boot-2009.01/include/configs/at91rm9200dk.h 2009-01-01 17:06:32.000000000 +0100 -@@ -24,6 +24,8 @@ - - #ifndef __CONFIG_H - #define __CONFIG_H -+#define AT91RM9200_BOARD MACH_TYPE_AT91RM9200DK -+#define CONFIG_HOSTNAME at91rm9200dk - - /* ARM asynchronous clock */ - #define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ -@@ -33,6 +35,7 @@ - #define AT91_SLOW_CLOCK 32768 /* slow clock */ - - #define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_AT91 1 /* THis is an ARM from the AT91 family */ - #define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ - #define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ - #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -@@ -117,6 +120,7 @@ - #define CONFIG_CMD_DHCP - #define CONFIG_CMD_MII - #define CONFIG_CMD_NAND -+#define CONFIG_CMD_AT91_SPIMUX - - #define CONFIG_NAND_LEGACY - -@@ -198,6 +202,11 @@ - #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - #endif /* CONFIG_ENV_IS_IN_DATAFLASH */ - -+#if defined(CONFIG_AT91RM9200DK) -+#define DATAFLASH_MMC_SELECT AT91_PIN_PB7 -+#else -+#define DATAFLASH_MMC_SELECT AT91_PIN_PB22 -+#endif - - #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -diff -urN u-boot-2009.01-rc1-0rig//Makefile u-boot-2009.01/Makefile ---- u-boot-2009.01-rc1-0rig//Makefile 2009-01-01 13:09:30.000000000 +0100 -+++ u-boot-2009.01/Makefile 2009-01-01 21:35:24.000000000 +0100 -@@ -2562,6 +2562,9 @@ - ## Atmel AT91RM9200 Systems - ######################################################################### - -+at91rm9200dk_df_config : unconfig -+ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 -+ - at91rm9200dk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 - - |