summaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorUlf Samuelsson <ulf.samuelsson@atmel.com>2009-01-02 11:18:09 +0000
committerUlf Samuelsson <ulf.samuelsson@atmel.com>2009-01-02 11:18:09 +0000
commitabda4017111c0f81149ca627857d34742dd506cc (patch)
treeff89226a0ba391b49207a67020bdc0bae7a75ee9 /target
parente195cb19f2a823f7128565f8d7dd54804a4df867 (diff)
downloadbuildroot-novena-abda4017111c0f81149ca627857d34742dd506cc.tar.gz
buildroot-novena-abda4017111c0f81149ca627857d34742dd506cc.zip
Support AT91 in vanilla U-Boot
Diffstat (limited to 'target')
-rw-r--r--target/device/Atmel/AT91_Config.in37
-rw-r--r--target/device/Atmel/Makefile.in4
-rw-r--r--target/device/Atmel/at91rm9200df/Makefile.in3
-rw-r--r--target/device/Atmel/at91sam9260dfc/Makefile.in18
-rw-r--r--target/device/Atmel/at91sam9261ek/Makefile.in9
-rw-r--r--target/device/Atmel/at91sam9263ek/Makefile.in9
-rw-r--r--target/device/Atmel/at91sam9g20dfc/Makefile.in11
-rw-r--r--target/device/Atmel/u-boot/Config.in5
-rw-r--r--target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-001-at91rm9200.patch723
-rw-r--r--target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch309
-rw-r--r--target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch324
-rw-r--r--target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-004-at91rm9200ek.patch536
-rw-r--r--target/u-boot/Config.in149
-rw-r--r--target/u-boot/Makefile.in38
14 files changed, 2160 insertions, 15 deletions
diff --git a/target/device/Atmel/AT91_Config.in b/target/device/Atmel/AT91_Config.in
index 9d9b8d50e..83021badc 100644
--- a/target/device/Atmel/AT91_Config.in
+++ b/target/device/Atmel/AT91_Config.in
@@ -188,96 +188,132 @@ choice
config BR2_TARGET_AT91RM9200DF
bool "Atmel AT91RM9200 Generic Dataflash(Card) Board Support"
depends on BR2_TARGET_AT91RM9200
+ select BR2_BOOTSOURCE_DATAFLASHCARD
help
The Atmel AT91RM9200EK Development Board using Dataflashcard
config BR2_TARGET_AT91RM9200SE
bool "Atmel AT91RM9200 Generic Dataflash(Card) Board Support (SE)"
depends on BR2_TARGET_AT91RM9200
+ select BR2_BOOTSOURCE_DATAFLASHCARD
help
The Atmel AT91RM9200EK Development Board using Dataflashcard (SE)
config BR2_TARGET_AT91RM9200EK
bool "Atmel AT91RM9200EK Development Board Support"
depends on BR2_TARGET_AT91RM9200
+ select BR2_BOOTSOURCE_DATAFLASHCARD
+ select BR2_BOOTSOURCE_FLASH
help
The Atmel AT91RM9200EK Development Board
config BR2_TARGET_AT91RM9200DK
bool "Atmel AT91RM9200DK Development Board Support"
depends on BR2_TARGET_AT91RM9200
+ select BR2_BOOTSOURCE_DATAFLASH
+ select BR2_BOOTSOURCE_FLASH
help
The Atmel AT91RM9200DK Development Board
config BR2_TARGET_AT91SAM9260DFC
bool "Atmel AT91SAM9260DFC"
depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9XE
+ select BR2_BOOTSOURCE_DATAFLASHCARD
+ select BR2_BOOTSOURCE_DATAFLASH
help
The Atmel AT91SAM9260 Development Board booting from Dataflashcard
config BR2_TARGET_AT91SAM9260EK
bool "Atmel AT91SAM9260EK"
depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9XE
+ select BR2_BOOTSOURCE_DATAFLASHCARD
+ select BR2_BOOTSOURCE_DATAFLASH
+ select BR2_BOOTSOURCE_NANDFLASH
help
The Atmel AT91SAM9260 Development Board booting from dataflash
config BR2_TARGET_AT91SAM9G20DFC
bool "Atmel AT91SAM9G20DFC"
depends on BR2_TARGET_AT91SAM9G20
+ select BR2_BOOTSOURCE_DATAFLASHCARD
help
The Atmel AT91SAM9G20 Development Board booting from Dataflashcard
config BR2_TARGET_AT91SAM9G20EK
bool "Atmel AT91SAM9G20EK"
depends on BR2_TARGET_AT91SAM9G20
+ select BR2_BOOTSOURCE_DATAFLASHCARD
+ select BR2_BOOTSOURCE_DATAFLASH
+ select BR2_BOOTSOURCE_NANDFLASH
help
The Atmel AT91SAM9G20 Development Board booting from dataflash
config BR2_TARGET_AT91SAM9XEEK
bool "Atmel AT91SAM9XE-EK"
depends on BR2_TARGET_AT91SAM9260 || BR2_TARGET_AT91SAM9XE
+ select BR2_BOOTSOURCE_DATAFLASHCARD
+ select BR2_BOOTSOURCE_DATAFLASH
+ select BR2_BOOTSOURCE_NANDFLASH
help
The Atmel AT91SAM9xe Development Board (Not Yet Implemented)
config BR2_TARGET_AT91SAM9261EK
bool "Atmel AT91SAM9261EK"
depends on BR2_TARGET_AT91SAM9261 || BR2_TARGET_AT91SAM9261S
+ select BR2_BOOTSOURCE_DATAFLASH
+ select BR2_BOOTSOURCE_NANDFLASH
help
The Atmel AT91SAM9261 Development Board
config BR2_TARGET_AT91SAM9RL64EK
bool "Atmel AT91SAM9RL64EK"
depends on BR2_TARGET_AT91SAM9RL64
+ select BR2_BOOTSOURCE_DATAFLASHCARD
+ select BR2_BOOTSOURCE_DATAFLASH
+ select BR2_BOOTSOURCE_NANDFLASH
+ select BR2_BOOTSOURCE_SDCARD
help
The Atmel AT91SAM9RL64 Development Board
config BR2_TARGET_AT91SAM9262EK
bool "Atmel AT91SAM9262EK"
depends on BR2_TARGET_AT91SAM9262
+ select BR2_BOOTSOURCE_DATAFLASHCARD
+ select BR2_BOOTSOURCE_NANDFLASH
help
The Atmel AT91SAM9262 Development Board (Not Yet Implemented)
config BR2_TARGET_AT91SAM9263EK
bool "Atmel AT91SAM9263EK"
depends on BR2_TARGET_AT91SAM9263
+ select BR2_BOOTSOURCE_DATAFLASHCARD
+ select BR2_BOOTSOURCE_NANDFLASH
help
The Atmel AT91SAM9263 Development Board (Not Yet Implemented)
config BR2_TARGET_AT572D940DCM
bool "Atmel AT572D940 Diopsis Computer Module"
depends on BR2_TARGET_AT572D940HF
+ select BR2_BOOTSOURCE_FLASH
+ select BR2_BOOTSOURCE_SDCARD
help
The Atmel Diopsis CPU Module (Not Yet Implemented)
config BR2_TARGET_AT91CAP9DK
bool "Atmel AT91CAP9DK"
depends on BR2_TARGET_AT91CAP9
+ select BR2_BOOTSOURCE_DATAFLASHCARD
+ select BR2_BOOTSOURCE_DATAFLASH
+ select BR2_BOOTSOURCE_NANDFLASH
help
The Atmel AT91CAP9 Development Kit (Not Yet Implemented)
config BR2_TARGET_AT91CAP9STK
bool "Atmel AT91CAP9STK"
depends on BR2_TARGET_AT91CAP9
+ select BR2_BOOTSOURCE_DATAFLASHCARD
+ select BR2_BOOTSOURCE_DATAFLASH
+ select BR2_BOOTSOURCE_NANDFLASH
help
The Atmel AT91CAP9 Starter Kit (Not Yet Implemented)
@@ -304,3 +340,4 @@ config BR2_TARGET_AT91SAM9261EK_SPIMODE3
endchoice
+
diff --git a/target/device/Atmel/Makefile.in b/target/device/Atmel/Makefile.in
index 117a7c252..342b129de 100644
--- a/target/device/Atmel/Makefile.in
+++ b/target/device/Atmel/Makefile.in
@@ -49,7 +49,7 @@ LINUX26_COPYTO:=/tftpboot
# The board specific Makefile.in can redefine BOARD_NAME's
LINUX_BOARD_NAME:=$(BOARD_NAME)
-UBOOT_BOARD_NAME:=$(BOARD_NAME)
+#UBOOT_BOARD_NAME:=$(BOARD_NAME)
DFB_BOARD_NAME:=$(BOARD_NAME)
#BR2_PACKAGE_BUSYBOX_CONFIG:=$(BR2_BOARD_PATH)/busybox-$(BR2_BUSYBOX_VERSION).config
@@ -84,6 +84,8 @@ atmel_status:
@echo DOWNLOAD_LINUX26_VERSION=$(DOWNLOAD_LINUX26_VERSION)
@echo LINUX_SOURCE=$(LINUX_SOURCE)
@echo TARGETS=$(TARGETS)
+ @echo ALLAN=$(ALLAN)
+
#TARGETS+=atmel_status
endif
diff --git a/target/device/Atmel/at91rm9200df/Makefile.in b/target/device/Atmel/at91rm9200df/Makefile.in
index 95b5ba7a2..12219c8d7 100644
--- a/target/device/Atmel/at91rm9200df/Makefile.in
+++ b/target/device/Atmel/at91rm9200df/Makefile.in
@@ -1,6 +1,7 @@
-ifeq ($(strip$(BOARD_NAME)),at91rm9200df)
+ifeq ($(strip $(BOARD_NAME)),at91rm9200df)
LINUX_BOARD_NAME=at91rm9200ek
BR2_PACKAGE_BUSYBOX_CONFIG:=$(BOARD_PATH)/busybox-1.7.1.config
+UBOOT_BOARD_NAME:=at91rm9200df
endif
diff --git a/target/device/Atmel/at91sam9260dfc/Makefile.in b/target/device/Atmel/at91sam9260dfc/Makefile.in
index e10b007b6..50b8e3ca5 100644
--- a/target/device/Atmel/at91sam9260dfc/Makefile.in
+++ b/target/device/Atmel/at91sam9260dfc/Makefile.in
@@ -1,4 +1,20 @@
-ifeq ($(strip$(BOARD_NAME)),at91sam9260dfc)
+ifeq ($(strip $(BOARD_NAME)),at91sam9260dfc)
LINUX26_BOARD_NAME=at91sam9260ek
BR2_PACKAGE_BUSYBOX_CONFIG:=$(BOARD_PATH)/busybox-1.9.1.config
+
+ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),)
+UBOOT_BOARD_NAME:=at91sam9260ek_dataflash_cs0
+else
+UBOOT_BOARD_NAME:=at91sam9260ek_dataflash_cs0x
endif
+ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),)
+UBOOT_BOARD_NAME:=at91sam9260ek_dataflash_cs1
+endif
+ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),)
+UBOOT_BOARD_NAME:=at91sam9260ek_nandflash
+endif
+ALLAN=1
+else
+ALLAN=2
+endif
+
diff --git a/target/device/Atmel/at91sam9261ek/Makefile.in b/target/device/Atmel/at91sam9261ek/Makefile.in
index 7bd61a423..e9074485f 100644
--- a/target/device/Atmel/at91sam9261ek/Makefile.in
+++ b/target/device/Atmel/at91sam9261ek/Makefile.in
@@ -1,3 +1,12 @@
ifeq ($(strip $(BOARD_NAME)),at91sam9261ek)
BR2_PACKAGE_BUSYBOX_CONFIG:=$(BOARD_PATH)/busybox-1.6.0.config
+ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),)
+UBOOT_BOARD_NAME:=at91sam9261ek_dataflash_cs0
+endif
+ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),)
+UBOOT_BOARD_NAME:=at91sam9261ek_dataflash_cs0
+endif
+ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),)
+UBOOT_BOARD_NAME:=at91sam9261ek_nandflash
+endif
endif
diff --git a/target/device/Atmel/at91sam9263ek/Makefile.in b/target/device/Atmel/at91sam9263ek/Makefile.in
index e10adb4b1..dce340765 100644
--- a/target/device/Atmel/at91sam9263ek/Makefile.in
+++ b/target/device/Atmel/at91sam9263ek/Makefile.in
@@ -1,3 +1,12 @@
ifeq ($(strip $(BOARD_NAME)),at91sam9263ek)
BR2_PACKAGE_BUSYBOX_CONFIG:=$(BOARD_PATH)/busybox-1.6.0.config
+ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),)
+UBOOT_BOARD_NAME:=at91sam9263ek_dataflash_cs0
+endif
+ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),)
+UBOOT_BOARD_NAME:=at91sam9263ek_dataflash_cs0
+endif
+ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),)
+UBOOT_BOARD_NAME:=at91sam9263ek_nandflash
+endif
endif
diff --git a/target/device/Atmel/at91sam9g20dfc/Makefile.in b/target/device/Atmel/at91sam9g20dfc/Makefile.in
index bcd9e58f1..79135c876 100644
--- a/target/device/Atmel/at91sam9g20dfc/Makefile.in
+++ b/target/device/Atmel/at91sam9g20dfc/Makefile.in
@@ -1,4 +1,13 @@
-ifeq ($(strip$(BOARD_NAME)),at91sam9g20dfc)
+ifeq ($(strip $(BOARD_NAME)),at91sam9g20dfc)
LINUX26_BOARD_NAME=at91sam9g20ek
BR2_PACKAGE_BUSYBOX_CONFIG:=$(BOARD_PATH)/busybox-1.9.1.config
+ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD),)
+UBOOT_BOARD_NAME:=at91sam9g20ek_dataflash_cs0
+endif
+ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH),)
+UBOOT_BOARD_NAME:=at91sam9g20ek_dataflash_cs0
+endif
+ifneq ($(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH),)
+UBOOT_BOARD_NAME:=at91sam9g20ek_nandflash
+endif
endif
diff --git a/target/device/Atmel/u-boot/Config.in b/target/device/Atmel/u-boot/Config.in
index 40764512a..ca1398169 100644
--- a/target/device/Atmel/u-boot/Config.in
+++ b/target/device/Atmel/u-boot/Config.in
@@ -2,9 +2,11 @@ config BR2_TARGET_UBOOT_AT91
bool "Das U-Boot Boot Monitor"
depends on BR2_TARGET_AT91 && !BR2_TARGET_AT91SAM9G20
depends on !BR2_TARGET_AT91SAM9260PF
+ select BR2_TARGET_CUSTOM_UBOOT
help
- Build "Das U-Boot" Boot Monitor
+ Build "Das U-Boot" Boot Monitor for AT91
+if BR2_TARGET_UBOOT_AT91
config BR2_TARGET_UBOOT_SERVERIP_AT91
string "server ip"
depends on BR2_TARGET_UBOOT_AT91
@@ -40,4 +42,5 @@ config BR2_TARGET_UBOOT_ETHADDR_AT91
help
Target ip address, this should be changed for production units
+endif
diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-001-at91rm9200.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-001-at91rm9200.patch
new file mode 100644
index 000000000..0445b2329
--- /dev/null
+++ b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-001-at91rm9200.patch
@@ -0,0 +1,723 @@
+diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pio.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pio.h
+--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pio.h 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pio.h 2009-01-01 14:02:28.000000000 +0100
+@@ -0,0 +1,49 @@
++/*
++ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pio.h]
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Parallel I/O Controller (PIO) - System peripherals registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_PIO_H
++#define AT91_PIO_H
++
++#define PIO_PER 0x00 /* Enable Register */
++#define PIO_PDR 0x04 /* Disable Register */
++#define PIO_PSR 0x08 /* Status Register */
++#define PIO_OER 0x10 /* Output Enable Register */
++#define PIO_ODR 0x14 /* Output Disable Register */
++#define PIO_OSR 0x18 /* Output Status Register */
++#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
++#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
++#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
++#define PIO_SODR 0x30 /* Set Output Data Register */
++#define PIO_CODR 0x34 /* Clear Output Data Register */
++#define PIO_ODSR 0x38 /* Output Data Status Register */
++#define PIO_PDSR 0x3c /* Pin Data Status Register */
++#define PIO_IER 0x40 /* Interrupt Enable Register */
++#define PIO_IDR 0x44 /* Interrupt Disable Register */
++#define PIO_IMR 0x48 /* Interrupt Mask Register */
++#define PIO_ISR 0x4c /* Interrupt Status Register */
++#define PIO_MDER 0x50 /* Multi-driver Enable Register */
++#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
++#define PIO_MDSR 0x58 /* Multi-driver Status Register */
++#define PIO_PUDR 0x60 /* Pull-up Disable Register */
++#define PIO_PUER 0x64 /* Pull-up Enable Register */
++#define PIO_PUSR 0x68 /* Pull-up Status Register */
++#define PIO_ASR 0x70 /* Peripheral A Select Register */
++#define PIO_BSR 0x74 /* Peripheral B Select Register */
++#define PIO_ABSR 0x78 /* AB Status Register */
++#define PIO_OWER 0xa0 /* Output Write Enable Register */
++#define PIO_OWDR 0xa4 /* Output Write Disable Register */
++#define PIO_OWSR 0xa8 /* Output Write Status Register */
++
++#endif
+diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pmc.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pmc.h
+--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/at91_pmc.h 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/at91_pmc.h 2009-01-01 15:51:28.000000000 +0100
+@@ -0,0 +1,116 @@
++/*
++ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pmc.h]
++ *
++ * Copyright (C) 2005 Ivan Kokshaysky
++ * Copyright (C) SAN People
++ *
++ * Copyright (C) 2008 Ulf Samuelsson
++ *
++ * Power Management Controller (PMC) - System peripherals registers.
++ * Based on AT91RM9200 datasheet revision E.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef AT91_PMC_H
++#define AT91_PMC_H
++
++#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
++#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
++
++#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
++#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
++#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
++#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
++#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
++#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
++#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
++#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
++#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
++#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
++#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
++#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
++#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
++#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
++#define AT91_PMC_RES_0C (AT91_PMC + 0x0c) /* Reserved */
++
++#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
++#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
++#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
++#define AT91_PMC_RES_1C (AT91_PMC + 0x1c) /* Reserved */
++
++
++#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
++#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
++#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
++#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
++
++#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
++#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
++#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
++
++#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
++#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
++#define AT91_PMC_DIV (0xff << 0) /* Divider */
++#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
++#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
++#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
++#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
++#define AT91_PMC_USBDIV_1 (0 << 28)
++#define AT91_PMC_USBDIV_2 (1 << 28)
++#define AT91_PMC_USBDIV_4 (2 << 28)
++#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
++
++#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
++#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
++#define AT91_PMC_CSS_SLOW (0 << 0)
++#define AT91_PMC_CSS_MAIN (1 << 0)
++#define AT91_PMC_CSS_PLLA (2 << 0)
++#define AT91_PMC_CSS_PLLB (3 << 0)
++#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
++#define AT91_PMC_PRES_1 (0 << 2)
++#define AT91_PMC_PRES_2 (1 << 2)
++#define AT91_PMC_PRES_4 (2 << 2)
++#define AT91_PMC_PRES_8 (3 << 2)
++#define AT91_PMC_PRES_16 (4 << 2)
++#define AT91_PMC_PRES_32 (5 << 2)
++#define AT91_PMC_PRES_64 (6 << 2)
++#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
++#define AT91_PMC_MDIV_1 (0 << 8)
++#define AT91_PMC_MDIV_2 (1 << 8)
++#define AT91_PMC_MDIV_3 (2 << 8)
++#define AT91_PMC_MDIV_4 (3 << 8)
++
++#define AT91_PMC_RES_34 (AT91_PMC + 0x34) /* Reserved */
++#define AT91_PMC_RES_38 (AT91_PMC + 0x38) /* Reserved */
++#define AT91_PMC_RES_3C (AT91_PMC + 0x3c) /* Reserved */
++
++#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
++
++#define AT91_PMC_RES_50 (AT91_PMC + 0x50) /* Reserved */
++#define AT91_PMC_RES_54 (AT91_PMC + 0x54) /* Reserved */
++#define AT91_PMC_RES_58 (AT91_PMC + 0x58) /* Reserved */
++#define AT91_PMC_RES_5C (AT91_PMC + 0x5c) /* Reserved */
++
++#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
++#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
++#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
++#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
++#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
++#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
++#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
++#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
++#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
++#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
++#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
++#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
++
++#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */
++#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
++
++#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
++
++#endif
+diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/AT91RM9200.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/AT91RM9200.h
+--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/AT91RM9200.h 2009-01-01 13:09:34.000000000 +0100
++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/AT91RM9200.h 2009-01-01 15:52:00.000000000 +0100
+@@ -28,6 +28,114 @@
+ #ifndef __ASSEMBLY__
+ typedef volatile unsigned int AT91_REG; /* Hardware register definition */
+
++/*
++ * Peripheral identifiers/interrupts.
++ */
++#define AT91RM9200_ID_AIC 0 /* Advanced Interrupt Controller (FIQ) */
++#define AT91RM9200_ID_SYSIRQ 1 /* System Peripherals */
++#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */
++#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */
++#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */
++#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */
++#define AT91RM9200_ID_US0 6 /* USART 0 */
++#define AT91RM9200_ID_US1 7 /* USART 1 */
++#define AT91RM9200_ID_US2 8 /* USART 2 */
++#define AT91RM9200_ID_US3 9 /* USART 2 */
++#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */
++#define AT91RM9200_ID_UDP 11 /* USB Device Port */
++#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */
++#define AT91RM9200_ID_SPI0 13 /* Serial Peripheral Interface 0 */
++#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller */
++#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller */
++#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller */
++#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */
++#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */
++#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */
++#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */
++#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */
++#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */
++#define AT91RM9200_ID_UHP 23 /* USB Host port */
++#define AT91RM9200_ID_EMAC 24 /* Ethernet */
++#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */
++#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */
++#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */
++#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */
++#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */
++#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */
++#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */
++/*
++ * User Peripheral physical base addresses.
++ */
++
++
++
++#define AT91RM9200_BASE_TC0 0xFFFA0000 /* (TC0) Base Address */
++#define AT91RM9200_BASE_TC1 0xFFFA4000 /* (TC0) Base Address */
++#define AT91RM9200_BASE_UDP 0xFFFB0000 /* (TC0) Base Address */
++#define AT91RM9200_BASE_MCI 0xFFFB4000 /* (TC0) Base Address */
++#define AT91RM9200_BASE_TWI 0xFFFB8000 /* (TC0) Base Address */
++#define AT91RM9200_BASE_EMAC 0xFFFBC000 /* (EMAC) Base Address */
++#define AT91RM9200_BASE_US0 0xFFFC0000 /* (US0) Base Address */
++#define AT91RM9200_BASE_US1 0xFFFC4000 /* (US1) Base Address */
++#define AT91RM9200_BASE_US2 0xFFFC8000 /* (US1) Base Address */
++#define AT91RM9200_BASE_US3 0xFFFCC000 /* (US1) Base Address */
++#define AT91RM9200_BASE_SPI 0xFFFE0000 /* (SPI) Base Address */
++
++#define AT91RM9200_BASE_AIC 0xFFFFF000 /* (AIC) Base Address */
++#define AT91RM9200_BASE_DBGU 0xFFFFF200 /* (DBGU) Base Address */
++#define AT91RM9200_BASE_PIOA 0xFFFFF400 /* (PIOA) Base Address */
++#define AT91RM9200_BASE_PIOB 0xFFFFF600 /* (PIOB) Base Address */
++#define AT91RM9200_BASE_PIOC 0xFFFFF800 /* (PIOC) Base Address */
++#define AT91RM9200_BASE_PIOD 0xFFFFFA00 /* (PIOC) Base Address */
++#define AT91RM9200_BASE_PMC 0xFFFFFC00 /* (PMC) Base Address */
++#define AT91RM9200_BASE_CKGR 0xFFFFFC20 /* (CKGR) Base Address */
++#define AT91RM9200_BASE_ST 0xFFFFFD00 /* (PMC) Base Address */
++#define AT91RM9200_BASE_RTC 0xFFFFFE00 /* (PMC) Base Address */
++#define AT91RM9200_BASE_MC 0xFFFFFF00 /* (PMC) Base Address */
++#define AT91RM9200_BASE_EBI 0xFFFFFF60 /* (PMC) Base Address */
++#define AT91RM9200_BASE_SMC2 0xFFFFFF70 /* (SMC2) Base Address */
++#define AT91RM9200_BASE_SDRAMC 0xFFFFFF90 /* (SMC2) Base Address */
++#define AT91RM9200_BASE_BFC 0xFFFFFFC0 /* (SMC2) Base Address */
++
++/*
++ * System Peripherals (offset from AT91_BASE_SYS)
++ */
++#define AT91_BASE_SYS AT91RM9200_BASE_AIC
++
++#define AT91_AIC (AT91RM9200_BASE_AIC - AT91_BASE_SYS)
++#define AT91_DBGU (AT91RM9200_BASE_DBGU - AT91_BASE_SYS)
++#define AT91_PIOA (AT91RM9200_BASE_PIOA - AT91_BASE_SYS)
++#define AT91_PIOB (AT91RM9200_BASE_PIOB - AT91_BASE_SYS)
++#define AT91_PIOC (AT91RM9200_BASE_PIOC - AT91_BASE_SYS)
++#define AT91_PIOD (AT91RM9200_BASE_PIOD - AT91_BASE_SYS)
++#define AT91_PMC (AT91RM9200_BASE_PMC - AT91_BASE_SYS)
++#define AT91_PMC (AT91RM9200_BASE_PMC - AT91_BASE_SYS)
++#define AT91_PMC (AT91RM9200_BASE_PMC - AT91_BASE_SYS)
++#define AT91_PMC (AT91RM9200_BASE_PMC - AT91_BASE_SYS)
++#define AT91_PMC (AT91RM9200_BASE_PMC - AT91_BASE_SYS)
++
++#define AT91_CKGR (AT91RM9200_BASE_CKGR - AT91_BASE_SYS)
++#define AT91_ST (AT91RM9200_BASE_ST - AT91_BASE_SYS)
++#define AT91_RTC (AT91RM9200_BASE_RTC - AT91_BASE_SYS)
++#define AT91_MC (AT91RM9200_BASE_MC - AT91_BASE_SYS)
++#define AT91_EBI (AT91RM9200_BASE_EBI - AT91_BASE_SYS)
++#define AT91_EBI_CSA ((AT91RM9200_BASE_EBI +0x00) - AT91_BASE_SYS)
++#define AT91_SMC2 (AT91RM9200_BASE_SMC2 - AT91_BASE_SYS)
++#define AT91_SMC2_CSR0 ((AT91RM9200_BASE_SMC2+0x00) - AT91_BASE_SYS)
++#define AT91_SMC2_CSR1 ((AT91RM9200_BASE_SMC2+0x04) - AT91_BASE_SYS)
++#define AT91_SMC2_CSR2 ((AT91RM9200_BASE_SMC2+0x08) - AT91_BASE_SYS)
++#define AT91_SMC2_CSR3 ((AT91RM9200_BASE_SMC2+0x0c) - AT91_BASE_SYS)
++#define AT91_SMC2_CSR4 ((AT91RM9200_BASE_SMC2+0x10) - AT91_BASE_SYS)
++#define AT91_SMC2_CSR5 ((AT91RM9200_BASE_SMC2+0x14) - AT91_BASE_SYS)
++#define AT91_SMC2_CSR6 ((AT91RM9200_BASE_SMC2+0x18) - AT91_BASE_SYS)
++#define AT91_SMC2_CSR7 ((AT91RM9200_BASE_SMC2+0x1c) - AT91_BASE_SYS)
++
++
++#define AT91_USART0 AT91RM9200_BASE_US0
++#define AT91_USART1 AT91RM9200_BASE_US1
++#define AT91_USART2 AT91RM9200_BASE_US2
++#define AT91_USART3 AT91RM9200_BASE_US3
++
+ /*****************************************************************************/
+ /* SOFTWARE API DEFINITION FOR Timer Counter Channel Interface */
+ /*****************************************************************************/
+diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/gpio.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/gpio.h
+--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/gpio.h 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/gpio.h 2009-01-01 14:02:11.000000000 +0100
+@@ -0,0 +1,367 @@
++/*
++ * [origin: Linux kernel include/asm-arm/arch-at91/gpio.h]
++ *
++ * Copyright (C) 2005 HP Labs
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++
++#ifndef __ASM_ARCH_AT91_GPIO_H
++#define __ASM_ARCH_AT91_GPIO_H
++
++#include <asm/io.h>
++#include <asm/errno.h>
++#include <asm/arch/at91_pio.h>
++#include <asm/arch/hardware.h>
++
++#define PIN_BASE 32
++
++#define MAX_GPIO_BANKS 5
++
++/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
++
++#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0)
++#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1)
++#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
++#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
++#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
++#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
++#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
++#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
++#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
++#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
++#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
++#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
++#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
++#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
++#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
++#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
++#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
++#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
++#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
++#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
++#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
++#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
++#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
++#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
++#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
++#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
++#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
++#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
++#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
++#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
++#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
++#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
++
++#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0)
++#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1)
++#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
++#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
++#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
++#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
++#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
++#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
++#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
++#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
++#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
++#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
++#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
++#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
++#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
++#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
++#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
++#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
++#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
++#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
++#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
++#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
++#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
++#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
++#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
++#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
++#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
++#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
++#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
++#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
++#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
++#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
++
++#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0)
++#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1)
++#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
++#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
++#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
++#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
++#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
++#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
++#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
++#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
++#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
++#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
++#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
++#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
++#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
++#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
++#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
++#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
++#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
++#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
++#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
++#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
++#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
++#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
++#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
++#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
++#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
++#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
++#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
++#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
++#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
++#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
++
++#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0)
++#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1)
++#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
++#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
++#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
++#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
++#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
++#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
++#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
++#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
++#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
++#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
++#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
++#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
++#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
++#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
++#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
++#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
++#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
++#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
++#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
++#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
++#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
++#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
++#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
++#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
++#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
++#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
++#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
++#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
++#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
++#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
++
++#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0)
++#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1)
++#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2)
++#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3)
++#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4)
++#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5)
++#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6)
++#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7)
++#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8)
++#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9)
++#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10)
++#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11)
++#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12)
++#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13)
++#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14)
++#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15)
++#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16)
++#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17)
++#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18)
++#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19)
++#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20)
++#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21)
++#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22)
++#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23)
++#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24)
++#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25)
++#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26)
++#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27)
++#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28)
++#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29)
++#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30)
++#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31)
++
++static unsigned long at91_pios[] = {
++ AT91_PIOA,
++ AT91_PIOB,
++ AT91_PIOC,
++#ifdef AT91_PIOD
++ AT91_PIOD,
++#ifdef AT91_PIOE
++ AT91_PIOE
++#endif
++#endif
++};
++
++static inline void *pin_to_controller(unsigned pin)
++{
++ pin -= PIN_BASE;
++ pin /= 32;
++ return (void *)(AT91_BASE_SYS + at91_pios[pin]);
++}
++
++static inline unsigned pin_to_mask(unsigned pin)
++{
++ pin -= PIN_BASE;
++ return 1 << (pin % 32);
++}
++
++/*
++ * mux the pin to the "GPIO" peripheral role.
++ */
++static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup)
++{
++ void *pio = pin_to_controller(pin);
++ unsigned mask = pin_to_mask(pin);
++
++ __raw_writel(mask, pio + PIO_IDR);
++ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
++ __raw_writel(mask, pio + PIO_PER);
++ return 0;
++}
++
++/*
++ * mux the pin to the "A" internal peripheral role.
++ */
++static inline int at91_set_A_periph(unsigned pin, int use_pullup)
++{
++ void *pio = pin_to_controller(pin);
++ unsigned mask = pin_to_mask(pin);
++
++ __raw_writel(mask, pio + PIO_IDR);
++ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
++ __raw_writel(mask, pio + PIO_ASR);
++ __raw_writel(mask, pio + PIO_PDR);
++ return 0;
++}
++
++/*
++ * mux the pin to the "B" internal peripheral role.
++ */
++static inline int at91_set_B_periph(unsigned pin, int use_pullup)
++{
++ void *pio = pin_to_controller(pin);
++ unsigned mask = pin_to_mask(pin);
++
++ __raw_writel(mask, pio + PIO_IDR);
++ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
++ __raw_writel(mask, pio + PIO_BSR);
++ __raw_writel(mask, pio + PIO_PDR);
++ return 0;
++}
++
++/*
++ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
++ * configure it for an input.
++ */
++static inline int at91_set_gpio_input(unsigned pin, int use_pullup)
++{
++ void *pio = pin_to_controller(pin);
++ unsigned mask = pin_to_mask(pin);
++
++ __raw_writel(mask, pio + PIO_IDR);
++ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
++ __raw_writel(mask, pio + PIO_ODR);
++ __raw_writel(mask, pio + PIO_PER);
++ return 0;
++}
++
++/*
++ * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
++ * and configure it for an output.
++ */
++static inline int at91_set_gpio_output(unsigned pin, int value)
++{
++ void *pio = pin_to_controller(pin);
++ unsigned mask = pin_to_mask(pin);
++
++ __raw_writel(mask, pio + PIO_IDR);
++ __raw_writel(mask, pio + PIO_PUDR);
++ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
++ __raw_writel(mask, pio + PIO_OER);
++ __raw_writel(mask, pio + PIO_PER);
++ return 0;
++}
++
++/*
++ * enable/disable the glitch filter; mostly used with IRQ handling.
++ */
++static inline int at91_set_deglitch(unsigned pin, int is_on)
++{
++ void *pio = pin_to_controller(pin);
++ unsigned mask = pin_to_mask(pin);
++
++ __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
++ return 0;
++}
++
++/*
++ * enable/disable the multi-driver; This is only valid for output and
++ * allows the output pin to run as an open collector output.
++ */
++static inline int at91_set_multi_drive(unsigned pin, int is_on)
++{
++ void *pio = pin_to_controller(pin);
++ unsigned mask = pin_to_mask(pin);
++
++ __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
++ return 0;
++}
++
++static inline int gpio_direction_input(unsigned pin)
++{
++ void *pio = pin_to_controller(pin);
++ unsigned mask = pin_to_mask(pin);
++
++ if (!(__raw_readl(pio + PIO_PSR) & mask))
++ return -EINVAL;
++ __raw_writel(mask, pio + PIO_ODR);
++ return 0;
++}
++
++static inline int gpio_direction_output(unsigned pin, int value)
++{
++ void *pio = pin_to_controller(pin);
++ unsigned mask = pin_to_mask(pin);
++
++ if (!(__raw_readl(pio + PIO_PSR) & mask))
++ return -EINVAL;
++ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
++ __raw_writel(mask, pio + PIO_OER);
++ return 0;
++}
++
++/*
++ * assuming the pin is muxed as a gpio output, set its value.
++ */
++static inline int at91_set_gpio_value(unsigned pin, int value)
++{
++ void *pio = pin_to_controller(pin);
++ unsigned mask = pin_to_mask(pin);
++
++ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
++ return 0;
++}
++
++/*
++ * read the pin's value (works even if it's not muxed as a gpio).
++ */
++static inline int at91_get_gpio_value(unsigned pin)
++{
++ void *pio = pin_to_controller(pin);
++ unsigned mask = pin_to_mask(pin);
++ u32 pdsr;
++
++ pdsr = __raw_readl(pio + PIO_PDSR);
++ return (pdsr & mask) != 0;
++}
++
++#endif
+diff -urN u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/io.h u-boot-2009.01/include/asm-arm/arch-at91rm9200/io.h
+--- u-boot-2009.01-rc1-0rig//include/asm-arm/arch-at91rm9200/io.h 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/asm-arm/arch-at91rm9200/io.h 2009-01-01 15:59:51.000000000 +0100
+@@ -0,0 +1,56 @@
++/*
++ * [origin: Linux kernel include/asm-arm/arch-at91/io.h]
++ *
++ * Copyright (C) 2003 SAN People
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __ASM_ARCH_IO_H
++#define __ASM_ARCH_IO_H
++
++#include <asm/io.h>
++
++static inline unsigned int at91_sys_read(unsigned int reg_offset)
++{
++ void *addr = (void *)AT91_BASE_SYS;
++
++ return __raw_readl(addr + reg_offset);
++}
++
++static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
++{
++ void *addr = (void *)AT91_BASE_SYS;
++
++ __raw_writel(value, addr + reg_offset);
++}
++
++static inline void at91_sys_setbit(unsigned long value, unsigned int reg_offset)
++{
++ void *addr = (void *)(AT91_BASE_SYS + reg_offset);
++ value |= __raw_readl(addr);
++ __raw_writel(value, addr);
++}
++
++static inline void at91_sys_clrbit(unsigned long value, unsigned int reg_offset)
++{
++ void *addr = (void *)(AT91_BASE_SYS + reg_offset);
++ unsigned long data;
++ data = __raw_readl(addr);
++ data &= ~value;
++ __raw_writel(data, addr);
++}
++
++#endif
+
diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch
new file mode 100644
index 000000000..c86dcdea9
--- /dev/null
+++ b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-002-at91rm9200dk.h.patch
@@ -0,0 +1,309 @@
+diff -urN u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk_df.h u-boot-2009.01/include/configs/at91rm9200dk_df.h
+--- u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk_df.h 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/configs/at91rm9200dk_df.h 2009-01-01 21:19:30.000000000 +0100
+@@ -0,0 +1,251 @@
++/*
++ * Rick Bronson <rick@efn.org>
++ *
++ * Configuration settings for the AT91RM9200DK board.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++#define AT91RM9200_BOARD MACH_TYPE_AT91RM9200DK
++#define CONFIG_HOSTNAME at91rm9200dk
++
++/* ARM asynchronous clock */
++#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
++#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
++/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */
++
++#define AT91_SLOW_CLOCK 32768 /* slow clock */
++
++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
++#define CONFIG_AT91 1 /* THis is an ARM from the AT91 family */
++#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
++#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
++#define USE_920T_MMU 1
++
++#define CONFIG_SKIP_LOWLEVEL_INIT /* Already done by dataflashboot */
++
++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
++#define CONFIG_SETUP_MEMORY_TAGS 1
++#define CONFIG_INITRD_TAG 1
++
++#ifndef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
++/* flash */
++#define MC_PUIA_VAL 0x00000000
++#define MC_PUP_VAL 0x00000000
++#define MC_PUER_VAL 0x00000000
++#define MC_ASR_VAL 0x00000000
++#define MC_AASR_VAL 0x00000000
++#define EBI_CFGR_VAL 0x00000000
++#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
++
++/* clocks */
++#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
++#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
++#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
++
++/* sdram */
++#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
++#define PIOC_BSR_VAL 0x00000000
++#define PIOC_PDR_VAL 0xFFFF0000
++#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
++#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */
++#define SDRAM 0x20000000 /* address of the SDRAM */
++#define SDRAM1 0x20000080 /* address of the SDRAM */
++#define SDRAM_VAL 0x00000000 /* value written to SDRAM */
++#define SDRC_MR_VAL 0x00000002 /* Precharge All */
++#define SDRC_MR_VAL1 0x00000004 /* refresh */
++#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
++#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
++#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
++#else
++#define CONFIG_SKIP_RELOCATE_UBOOT
++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
++/*
++ * Size of malloc() pool
++ */
++#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
++#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
++
++#define CONFIG_BAUDRATE 115200
++
++/*
++ * Hardware drivers
++ */
++
++/* define one of these to choose the DBGU, USART0 or USART1 as console */
++#define CONFIG_DBGU
++#undef CONFIG_USART0
++#undef CONFIG_USART1
++
++#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
++
++#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
++
++#define CONFIG_BOOTDELAY 3
++/* #define CONFIG_ENV_OVERWRITE 1 */
++
++
++/*
++ * BOOTP options
++ */
++#define CONFIG_BOOTP_BOOTFILESIZE
++#define CONFIG_BOOTP_BOOTPATH
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_HOSTNAME
++
++
++/*
++ * Command line configuration.
++ */
++#include <config_cmd_default.h>
++
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NAND
++#define CONFIG_CMD_AT91_SPIMUX
++
++#define CONFIG_NAND_LEGACY
++
++#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
++#define SECTORSIZE 512
++
++#define ADDR_COLUMN 1
++#define ADDR_PAGE 2
++#define ADDR_COLUMN_PAGE 3
++
++#define NAND_ChipID_UNKNOWN 0x00
++#define NAND_MAX_FLOORS 1
++#define NAND_MAX_CHIPS 1
++
++#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
++#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
++
++#include <asm/arch/AT91RM9200.h> /* needed for port definitions */
++#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
++#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
++
++#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
++
++#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
++#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
++#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
++#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
++/* the following are NOP's in our implementation */
++#define NAND_CTL_CLRALE(nandptr)
++#define NAND_CTL_SETALE(nandptr)
++#define NAND_CTL_CLRCLE(nandptr)
++#define NAND_CTL_SETCLE(nandptr)
++
++#define CONFIG_NR_DRAM_BANKS 1
++#define PHYS_SDRAM 0x20000000
++#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
++
++#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
++#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
++
++#define CONFIG_DRIVER_ETHER
++#define CONFIG_NET_RETRY_COUNT 20
++#define CONFIG_AT91C_USE_RMII
++
++/* AC Characteristics */
++/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS (0xC << 16)
++#define DATAFLASH_TCHS (0x1 << 24)
++
++#define CONFIG_HAS_DATAFLASH 1
++#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
++#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
++#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
++#define CFG_SUPPORT_BLOCK_ERASE 1
++
++
++#define PHYS_FLASH_1 0x10000000
++#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */
++#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
++#define CONFIG_SYS_MAX_FLASH_BANKS 1
++#define CONFIG_SYS_MAX_FLASH_SECT 256
++#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
++#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
++
++#define CONFIG_ENV_IS_IN_DATAFLASH 1
++#define CONFIG_NEW_PARTITION 1
++
++#ifdef CONFIG_ENV_IS_IN_DATAFLASH
++#ifdef CONFIG_NEW_PARTITION
++#define CONFIG_ENV_OFFSET 0x4200
++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE 0x2000 /* 8 * 1056 really , but start.s is not OK with this*/
++#else
++#define CONFIG_ENV_OFFSET 0x20000
++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
++#endif
++#else
++#define CONFIG_ENV_IS_IN_FLASH 1
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */
++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
++#else
++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */
++#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */
++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
++#endif /* CONFIG_ENV_IS_IN_DATAFLASH */
++
++#if defined(CONFIG_AT91RM9200DK)
++#define DATAFLASH_MMC_SELECT AT91_PIN_PB7
++#else
++#define DATAFLASH_MMC_SELECT AT91_PIN_PB22
++#endif
++
++#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
++
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */
++#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
++#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */
++#else
++#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */
++#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
++#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */
++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
++
++#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 }
++
++#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
++#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
++#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
++
++#define CONFIG_SYS_HZ 1000
++#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
++ /* AT91C_TC_TIMER_DIV1_CLOCK */
++
++#define CONFIG_STACKSIZE (32*1024) /* regular stack */
++
++#ifdef CONFIG_USE_IRQ
++#error CONFIG_USE_IRQ not supported
++#endif
++
++#endif
+diff -urN u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk.h u-boot-2009.01/include/configs/at91rm9200dk.h
+--- u-boot-2009.01-rc1-0rig//include/configs/at91rm9200dk.h 2009-01-01 13:09:35.000000000 +0100
++++ u-boot-2009.01/include/configs/at91rm9200dk.h 2009-01-01 17:06:32.000000000 +0100
+@@ -24,6 +24,8 @@
+
+ #ifndef __CONFIG_H
+ #define __CONFIG_H
++#define AT91RM9200_BOARD MACH_TYPE_AT91RM9200DK
++#define CONFIG_HOSTNAME at91rm9200dk
+
+ /* ARM asynchronous clock */
+ #define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
+@@ -33,6 +35,7 @@
+ #define AT91_SLOW_CLOCK 32768 /* slow clock */
+
+ #define CONFIG_ARM920T 1 /* This is an ARM920T Core */
++#define CONFIG_AT91 1 /* THis is an ARM from the AT91 family */
+ #define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
+ #define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
+ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+@@ -117,6 +120,7 @@
+ #define CONFIG_CMD_DHCP
+ #define CONFIG_CMD_MII
+ #define CONFIG_CMD_NAND
++#define CONFIG_CMD_AT91_SPIMUX
+
+ #define CONFIG_NAND_LEGACY
+
+@@ -198,6 +202,11 @@
+ #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+ #endif /* CONFIG_ENV_IS_IN_DATAFLASH */
+
++#if defined(CONFIG_AT91RM9200DK)
++#define DATAFLASH_MMC_SELECT AT91_PIN_PB7
++#else
++#define DATAFLASH_MMC_SELECT AT91_PIN_PB22
++#endif
+
+ #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
+
+diff -urN u-boot-2009.01-rc1-0rig//Makefile u-boot-2009.01/Makefile
+--- u-boot-2009.01-rc1-0rig//Makefile 2009-01-01 13:09:30.000000000 +0100
++++ u-boot-2009.01/Makefile 2009-01-01 21:35:24.000000000 +0100
+@@ -2562,6 +2562,9 @@
+ ## Atmel AT91RM9200 Systems
+ #########################################################################
+
++at91rm9200dk_df_config : unconfig
++ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
++
+ at91rm9200dk_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
+
+
diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch
new file mode 100644
index 000000000..8f14170fa
--- /dev/null
+++ b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-003-at91rm9200dk.patch
@@ -0,0 +1,324 @@
+diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/at91rm9200dk.c u-boot-2009.01/board/atmel/at91rm9200dk/at91rm9200dk.c
+--- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/at91rm9200dk.c 2009-01-01 13:09:31.000000000 +0100
++++ u-boot-2009.01/board/atmel/at91rm9200dk/at91rm9200dk.c 2009-01-01 16:11:36.000000000 +0100
+@@ -3,6 +3,9 @@
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
++ * (C) Copyright 2008
++ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
++ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+@@ -24,6 +27,10 @@
+
+ #include <common.h>
+ #include <asm/arch/AT91RM9200.h>
++#include <asm/arch/at91_pmc.h>
++#include <asm/arch/at91_pio.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/io.h>
+ #include <at91rm9200_net.h>
+ #include <dm9161.h>
+
+@@ -41,13 +48,13 @@
+
+ /* Correct IRDA resistor problem */
+ /* Set PA23_TXD in Output */
+- ((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
++ at91_set_gpio_output(AT91_PIN_PA23, 1);
+
+ /* memory and cpu-speed are setup before relocation */
+ /* so we do _nothing_ here */
+
+ /* arch number of AT91RM9200DK-Board */
+- gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
++ gd->bd->bi_arch_number = AT91RM9200_BOARD;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+@@ -91,46 +98,58 @@
+ */
+ #if defined(CONFIG_CMD_NAND)
+ extern ulong nand_probe (ulong physadr);
++/* set the bus interface characteristics based on
++ * tDS Data Set up Time 30 - ns
++ * tDH Data Hold Time 20 - ns
++ * tALS ALE Set up Time 20 - ns
++ * 16ns at 60 MHz ~= 3
++ */
+
+-#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
+-void nand_init (void)
+-{
+- /* Setup Smart Media, fitst enable the address range of CS3 */
+- *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
+- /* set the bus interface characteristics based on
+- tDS Data Set up Time 30 - ns
+- tDH Data Hold Time 20 - ns
+- tALS ALE Set up Time 20 - ns
+- 16ns at 60 MHz ~= 3 */
+ /*memory mapping structures */
+ #define SM_ID_RWH (5 << 28)
+ #define SM_RWH (1 << 28)
+ #define SM_RWS (0 << 24)
+ #define SM_TDF (1 << 8)
+ #define SM_NWS (3)
+- AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
+- AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
+- SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
++
++#define SMARTMEDIA_INIT ( \
++ SM_RWH | \
++ SM_RWS | \
++ AT91C_SMC2_ACSS_STANDARD | \
++ AT91C_SMC2_DBW_8 | \
++ SM_TDF | \
++ AT91C_SMC2_WSEN | \
++ SM_NWS \
++ )
++
++
++
++#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
++void nand_init (void)
++{
++ /* Setup Smart Media, fitst enable the address range of CS3 */
++ /* *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia; */
++ at91_sys_setbit(AT91C_EBI_CS3A_SMC_SmartMedia, AT91_EBI_CSA);
++
++ /* Init Smartmedia Interface */
++ at91_sys_write(AT91_SMC2_CSR3, SMARTMEDIA_INIT);
+
+ /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
+- *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
+- AT91C_PC3_BFBAA_SMWE;
+- *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
+- AT91C_PC3_BFBAA_SMWE;
++ at91_set_A_periph(AT91_PIN_PC0, 0); /* BFCK */
++ at91_set_A_periph(AT91_PIN_PC1, 0); /* BFRDY/SMOE */
++ at91_set_A_periph(AT91_PIN_PC3, 0); /* BFBAA/SMWE */
+
+ /* Configure PC2 as input (signal READY of the SmartMedia) */
+- *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */
+- *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */
++ at91_set_gpio_input(AT91_PIN_PC2, 0);
+
+ /* Configure PB1 as input (signal Card Detect of the SmartMedia) */
+- *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */
+- *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */
++ at91_set_gpio_input(AT91_PIN_PB1, 0);
+
+ /* PIOB and PIOC clock enabling */
+- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
+- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
++ at91_sys_write(AT91_PMC_PCER, 1 << AT91RM9200_ID_PIOB);
++ at91_sys_write(AT91_PMC_PCER, 1 << AT91RM9200_ID_PIOC);
+
+- if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
++ if (at91_get_gpio_value(AT91_PIN_PB1))
+ printf (" No SmartMedia card inserted\n");
+ #ifdef DEBUG
+ printf (" SmartMedia card inserted\n");
+@@ -140,3 +159,4 @@
+ printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
+ }
+ #endif
++
+diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/led.c u-boot-2009.01/board/atmel/at91rm9200dk/led.c
+--- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/led.c 2009-01-01 13:09:31.000000000 +0100
++++ u-boot-2009.01/board/atmel/at91rm9200dk/led.c 2009-01-01 15:53:56.000000000 +0100
+@@ -24,57 +24,105 @@
+
+ #include <common.h>
+ #include <asm/arch/AT91RM9200.h>
++/*#include <asm/arch/at91_pmc.h>*/
++#include <asm/arch/gpio.h>
++#include <asm/arch/io.h>
+
+-#define GREEN_LED AT91C_PIO_PB0
+-#define YELLOW_LED AT91C_PIO_PB1
+-#define RED_LED AT91C_PIO_PB2
++#define GREEN_LED AT91_PIN_PB0
++#define YELLOW_LED AT91_PIN_PB1
++#define RED_LED AT91_PIN_PB2
+
+-void green_LED_on(void)
++
++#define GREEN_LED_ON 0
++#define GREEN_LED_OFF 1
++#define YELLOW_LED_ON 0
++#define YELLOW_LED_OFF 1
++#define RED_LED_ON 0
++#define RED_LED_OFF 1
++
++#define TIME_SLICE 500000
++
++void yellow_LED_on(void)
++{
++ at91_set_gpio_value(YELLOW_LED, YELLOW_LED_ON);
++}
++
++void yellow_LED_off(void)
++{
++ at91_set_gpio_value(YELLOW_LED, YELLOW_LED_OFF);
++}
++
++void red_LED_on(void)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- PIOB->PIO_CODR = GREEN_LED;
++ at91_set_gpio_value(RED_LED, RED_LED_ON);
+ }
+
+-void yellow_LED_on(void)
++void red_LED_off(void)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- PIOB->PIO_CODR = YELLOW_LED;
++ at91_set_gpio_value(RED_LED, RED_LED_OFF);
+ }
+
+-void red_LED_on(void)
++void green_LED_on(void)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- PIOB->PIO_CODR = RED_LED;
++ at91_set_gpio_value(GREEN_LED, GREEN_LED_ON);
+ }
+
+-void green_LED_off(void)
++void green_LED_off(void)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- PIOB->PIO_SODR = GREEN_LED;
++ at91_set_gpio_value(GREEN_LED, GREEN_LED_OFF);
+ }
+
+-void yellow_LED_off(void)
++static void delay(unsigned int time)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- PIOB->PIO_SODR = YELLOW_LED;
++ volatile unsigned int counter = time;
++ while(counter > 0) counter--;
+ }
+
+-void red_LED_off(void)
++void green_LED_blink(unsigned int time)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- PIOB->PIO_SODR = RED_LED;
++ while(time > 0) {
++ green_LED_on();
++ delay(TIME_SLICE);
++ green_LED_off();
++ delay(TIME_SLICE);
++ time--;
++ }
+ }
+
++void yellow_LED_blink(unsigned int time)
++{
++ while(time > 0) {
++ yellow_LED_on();
++ delay(TIME_SLICE);
++ yellow_LED_off();
++ delay(TIME_SLICE);
++ time--;
++ }
++}
+
+-void coloured_LED_init (void)
++void red_LED_blink(unsigned int time)
+ {
+- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
+- AT91PS_PMC PMC = AT91C_BASE_PMC;
+- PMC->PMC_PCER = (1 << AT91C_ID_PIOB); /* Enable PIOB clock */
+- /* Disable peripherals on LEDs */
+- PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
+- /* Enable pins as outputs */
+- PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
+- /* Turn all LEDs OFF */
+- PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
++ while(time > 0) {
++ red_LED_on();
++ delay(TIME_SLICE);
++ red_LED_off();
++ delay(TIME_SLICE);
++ time--;
++ }
+ }
++
++void coloured_LED_init(void)
++{
++ /* Enable clock */
++ at91_sys_write(AT91C_PMC_PCER, 1 << AT91RM9200_ID_PIOB);
++
++ at91_set_gpio_output(GREEN_LED, 1);
++ at91_set_gpio_output(YELLOW_LED, 1);
++ at91_set_gpio_output(RED_LED, 1);
++
++ at91_set_gpio_value(GREEN_LED, GREEN_LED_OFF);
++ at91_set_gpio_value(YELLOW_LED, YELLOW_LED_OFF);
++ at91_set_gpio_value(RED_LED, RED_LED_ON);
++}
++
++
+diff -urN u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/mux.c u-boot-2009.01/board/atmel/at91rm9200dk/mux.c
+--- u-boot-2009.01-rc1-0rig//board/atmel/at91rm9200dk/mux.c 2009-01-01 13:09:31.000000000 +0100
++++ u-boot-2009.01/board/atmel/at91rm9200dk/mux.c 2009-01-01 16:38:01.000000000 +0100
+@@ -1,37 +1,29 @@
+ #include <config.h>
+ #include <common.h>
+ #include <asm/hardware.h>
++#include <asm/arch/at91_pio.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/io.h>
+ #include <dataflash.h>
+
+ int AT91F_GetMuxStatus(void) {
+-#ifdef DATAFLASH_MMC_SELECT
+- AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */
+- AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */
+-
+-
+- if(AT91C_BASE_PIOB->PIO_ODSR & DATAFLASH_MMC_SELECT) {
+- return 1;
+- } else {
+- return 0;
+- }
+-#endif
++#ifdef CONFIG_CMD_AT91_SPIMUX
++ return at91_get_gpio_value(DATAFLASH_MMC_SELECT);
++#else
+ return 0;
++#endif
+ }
+
+-void AT91F_SelectMMC(void) {
+-#ifdef DATAFLASH_MMC_SELECT
+- AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */
+- AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */
+- /* Set Output */
+- AT91C_BASE_PIOB->PIO_SODR = DATAFLASH_MMC_SELECT;
++void AT91F_SelectMMC(void)
++{
++#ifdef CONFIG_CMD_AT91_SPIMUX
++ at91_set_gpio_output(DATAFLASH_MMC_SELECT, 1); /* Set in PIO mode and select SD-Card*/
+ #endif
+ }
+
+ void AT91F_SelectSPI(void) {
+-#ifdef DATAFLASH_MMC_SELECT
+- AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */
+- AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */
+- /* Clear Output */
+- AT91C_BASE_PIOB->PIO_CODR = DATAFLASH_MMC_SELECT;
++#ifdef CONFIG_CMD_AT91_SPIMUX
++ at91_set_gpio_output(DATAFLASH_MMC_SELECT, 0); /* Set in PIO mode and select SPI */
+ #endif
+ }
++
+
diff --git a/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-004-at91rm9200ek.patch b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-004-at91rm9200ek.patch
new file mode 100644
index 000000000..f979dd3d6
--- /dev/null
+++ b/target/u-boot/2009.01-rc1/u-boot-2009.01-rc1-004-at91rm9200ek.patch
@@ -0,0 +1,536 @@
+diff -urN u-boot-2009.01-0rig/include/configs/at91rm9200df.h u-boot-2009.01/include/configs/at91rm9200df.h
+--- u-boot-2009.01-0rig/include/configs/at91rm9200df.h 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/configs/at91rm9200df.h 2009-01-01 21:19:17.000000000 +0100
+@@ -0,0 +1,261 @@
++/*
++ * Rick Bronson <rick@efn.org>
++ *
++ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
++ *
++ * Configuration settings for the AT91RM9200EK board.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++#define AT91RM9200_BOARD MACH_TYPE_AT91RM9200DF
++#define CONFIG_HOSTNAME at91rm9200df
++/* ARM asynchronous clock */
++#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
++#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
++/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */
++
++#define AT91_SLOW_CLOCK 32768 /* slow clock */
++
++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
++#define CONFIG_AT91 1 /* THis is an ARM from the AT91 family */
++#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
++#define CONFIG_AT91RM9200DF 1 /* Generic AT91RM9200 Board running from Dataflashcard */
++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
++#define USE_920T_MMU 1
++
++#define CONFIG_SKIP_LOWLEVEL_INIT /* Already done by dataflashboot */
++
++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
++#define CONFIG_SETUP_MEMORY_TAGS 1
++#define CONFIG_INITRD_TAG 1
++
++#ifndef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
++/* flash */
++#define MC_PUIA_VAL 0x00000000
++#define MC_PUP_VAL 0x00000000
++#define MC_PUER_VAL 0x00000000
++#define MC_ASR_VAL 0x00000000
++#define MC_AASR_VAL 0x00000000
++#define EBI_CFGR_VAL 0x00000000
++#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
++
++/* clocks */
++#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
++#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
++#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
++
++/* sdram */
++#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
++#define PIOC_BSR_VAL 0x00000000
++#define PIOC_PDR_VAL 0xFFFF0000
++#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
++#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */
++#define SDRAM 0x20000000 /* address of the SDRAM */
++#define SDRAM1 0x20000080 /* address of the SDRAM */
++#define SDRAM_VAL 0x00000000 /* value written to SDRAM */
++#define SDRC_MR_VAL 0x00000002 /* Precharge All */
++#define SDRC_MR_VAL1 0x00000004 /* refresh */
++#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
++#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
++#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
++#else
++#define CONFIG_SKIP_RELOCATE_UBOOT
++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
++/*
++ * Size of malloc() pool
++ */
++#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
++#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
++
++#define CONFIG_BAUDRATE 115200
++
++/*
++ * Hardware drivers
++ */
++
++/* define one of these to choose the DBGU, USART0 or USART1 as console */
++#define CONFIG_DBGU
++#undef CONFIG_USART0
++#undef CONFIG_USART1
++
++#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
++
++#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
++
++#define CONFIG_BOOTDELAY 3
++/* #define CONFIG_ENV_OVERWRITE 1 */
++
++
++/*
++ * BOOTP options
++ */
++#define CONFIG_BOOTP_BOOTFILESIZE
++#define CONFIG_BOOTP_BOOTPATH
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_HOSTNAME
++
++
++/*
++ * Command line configuration.
++ */
++#include <config_cmd_default.h>
++
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NAND
++#define CONFIG_CMD_AT91_SPIMUX
++#define CONFIG_CMD_ETHINIT
++
++#define CONFIG_DOS_PARTITION 1
++#define CONFIG_MMC 1
++#define CONFIG_SUPPORT_VFAT 1
++#define CFG_MMC_BASE 0xFFFB4000 /* From AT91RM9200.h*/
++#define CFG_MMC_BLOCKSIZE 512
++
++#define CONFIG_NAND_LEGACY
++
++#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
++#define SECTORSIZE 512
++
++#define ADDR_COLUMN 1
++#define ADDR_PAGE 2
++#define ADDR_COLUMN_PAGE 3
++
++#define NAND_ChipID_UNKNOWN 0x00
++#define NAND_MAX_FLOORS 1
++#define NAND_MAX_CHIPS 1
++
++#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
++#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
++
++#include <asm/arch/AT91RM9200.h> /* needed for port definitions */
++#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
++#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
++
++#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
++
++#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
++#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
++#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
++#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
++/* the following are NOP's in our implementation */
++#define NAND_CTL_CLRALE(nandptr)
++#define NAND_CTL_SETALE(nandptr)
++#define NAND_CTL_CLRCLE(nandptr)
++#define NAND_CTL_SETCLE(nandptr)
++
++#define CONFIG_NR_DRAM_BANKS 1
++#define PHYS_SDRAM 0x20000000
++#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
++
++#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
++#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
++
++#define CONFIG_DRIVER_ETHER
++#define CONFIG_NET_RETRY_COUNT 20
++#define CONFIG_AT91C_USE_RMII
++
++/* AC Characteristics */
++/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS (0xC << 16)
++#define DATAFLASH_TCHS (0x1 << 24)
++
++#define CONFIG_HAS_DATAFLASH 1
++#define BOARD_LATE_INIT 1
++
++#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
++#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
++#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
++#define CFG_SUPPORT_BLOCK_ERASE 1
++
++#define PHYS_FLASH_1 0x10000000
++#define PHYS_FLASH_SIZE 0x800000 /* 2 megs main flash */
++#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
++#define CONFIG_SYS_MAX_FLASH_BANKS 1
++#define CONFIG_SYS_MAX_FLASH_SECT 256
++#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
++#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
++
++#define CONFIG_ENV_IS_IN_DATAFLASH
++#define CONFIG_NEW_PARTITION 1
++
++#ifdef CONFIG_ENV_IS_IN_DATAFLASH
++#ifdef CONFIG_NEW_PARTITION
++#define CONFIG_ENV_OFFSET 0x21000
++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE 0x2000 /* 8 * 1056 really , but start.s is not OK with this*/
++#else
++#define CONFIG_ENV_OFFSET 0x20000
++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
++#endif
++#else
++#define CONFIG_ENV_IS_IN_FLASH 1
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */
++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
++#else
++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */
++#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */
++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
++#endif /* CONFIG_ENV_IS_IN_DATAFLASH */
++
++#if defined(CONFIG_AT91RM9200DK)
++#define DATAFLASH_MMC_SELECT AT91_PIN_PB7
++#else
++#define DATAFLASH_MMC_SELECT AT91_PIN_PB22
++#endif
++
++#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
++
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */
++#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
++#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */
++#else
++#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */
++#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
++#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */
++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
++
++#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 }
++
++#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
++#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
++#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
++
++#define CONFIG_SYS_HZ 1000
++#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
++ /* AT91C_TC_TIMER_DIV1_CLOCK */
++
++#define CONFIG_STACKSIZE (32*1024) /* regular stack */
++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
++#define CONFIG_STACKSIZE_FIQ (4*1024)
++
++#ifdef CONFIG_USE_IRQ
++#error CONFIG_USE_IRQ not supported
++#endif
++#endif
+diff -urN u-boot-2009.01-0rig/include/configs/at91rm9200ek.h u-boot-2009.01/include/configs/at91rm9200ek.h
+--- u-boot-2009.01-0rig/include/configs/at91rm9200ek.h 1970-01-01 01:00:00.000000000 +0100
++++ u-boot-2009.01/include/configs/at91rm9200ek.h 2009-01-01 17:13:31.000000000 +0100
+@@ -0,0 +1,251 @@
++/*
++ * Rick Bronson <rick@efn.org>
++ *
++ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
++ *
++ * Configuration settings for the AT91RM9200EK board.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++#define AT91RM9200_BOARD MACH_TYPE_AT91RM9200EK
++#define CONFIG_HOSTNAME at91rm9200ek
++/* ARM asynchronous clock */
++#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
++#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
++/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */
++
++#define AT91_SLOW_CLOCK 32768 /* slow clock */
++
++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
++#define CONFIG_AT91 1 /* THis is an ARM from the AT91 family */
++#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
++#define CONFIG_AT91RM9200EK 1 /* on an AT91RM9200EK Board */
++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
++#define USE_920T_MMU 1
++
++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
++#define CONFIG_SETUP_MEMORY_TAGS 1
++#define CONFIG_INITRD_TAG 1
++
++#ifndef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
++/* flash */
++#define MC_PUIA_VAL 0x00000000
++#define MC_PUP_VAL 0x00000000
++#define MC_PUER_VAL 0x00000000
++#define MC_ASR_VAL 0x00000000
++#define MC_AASR_VAL 0x00000000
++#define EBI_CFGR_VAL 0x00000000
++#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
++
++/* clocks */
++#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
++#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
++#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
++
++/* sdram */
++#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
++#define PIOC_BSR_VAL 0x00000000
++#define PIOC_PDR_VAL 0xFFFF0000
++#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
++#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */
++#define SDRAM 0x20000000 /* address of the SDRAM */
++#define SDRAM1 0x20000080 /* address of the SDRAM */
++#define SDRAM_VAL 0x00000000 /* value written to SDRAM */
++#define SDRC_MR_VAL 0x00000002 /* Precharge All */
++#define SDRC_MR_VAL1 0x00000004 /* refresh */
++#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
++#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
++#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
++#else
++#define CONFIG_SKIP_RELOCATE_UBOOT
++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
++/*
++ * Size of malloc() pool
++ */
++#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
++#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
++
++#define CONFIG_BAUDRATE 115200
++
++/*
++ * Hardware drivers
++ */
++
++/* define one of these to choose the DBGU, USART0 or USART1 as console */
++#define CONFIG_DBGU
++#undef CONFIG_USART0
++#undef CONFIG_USART1
++
++#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
++
++#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
++
++#define CONFIG_BOOTDELAY 3
++/* #define CONFIG_ENV_OVERWRITE 1 */
++
++
++/*
++ * BOOTP options
++ */
++#define CONFIG_BOOTP_BOOTFILESIZE
++#define CONFIG_BOOTP_BOOTPATH
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_HOSTNAME
++
++
++/*
++ * Command line configuration.
++ */
++#include <config_cmd_default.h>
++
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_MII
++#define CONFIG_CMD_NAND
++#define CONFIG_CMD_AT91_SPIMUX
++#define CONFIG_CMD_ETHINIT
++
++#define CONFIG_NAND_LEGACY
++
++#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
++#define SECTORSIZE 512
++
++#define ADDR_COLUMN 1
++#define ADDR_PAGE 2
++#define ADDR_COLUMN_PAGE 3
++
++#define NAND_ChipID_UNKNOWN 0x00
++#define NAND_MAX_FLOORS 1
++#define NAND_MAX_CHIPS 1
++
++#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
++#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
++
++#include <asm/arch/AT91RM9200.h> /* needed for port definitions */
++#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
++#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
++
++#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
++
++#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
++#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
++#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
++#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
++/* the following are NOP's in our implementation */
++#define NAND_CTL_CLRALE(nandptr)
++#define NAND_CTL_SETALE(nandptr)
++#define NAND_CTL_CLRCLE(nandptr)
++#define NAND_CTL_SETCLE(nandptr)
++
++#define CONFIG_NR_DRAM_BANKS 1
++#define PHYS_SDRAM 0x20000000
++#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
++
++#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
++#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
++
++#define CONFIG_DRIVER_ETHER
++#define CONFIG_NET_RETRY_COUNT 20
++#define CONFIG_AT91C_USE_RMII
++
++/* AC Characteristics */
++/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS (0xC << 16)
++#define DATAFLASH_TCHS (0x1 << 24)
++
++#define CONFIG_HAS_DATAFLASH 1
++#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
++#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
++#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
++#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
++#define CFG_SUPPORT_BLOCK_ERASE 1
++
++#define PHYS_FLASH_1 0x10000000
++#define PHYS_FLASH_SIZE 0x800000 /* 2 megs main flash */
++#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
++#define CONFIG_SYS_MAX_FLASH_BANKS 1
++#define CONFIG_SYS_MAX_FLASH_SECT 256
++#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
++#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
++
++#undef CONFIG_ENV_IS_IN_DATAFLASH
++#define CONFIG_NEW_PARTITION 1
++
++#ifdef CONFIG_ENV_IS_IN_DATAFLASH
++#ifdef CONFIG_NEW_PARTITION
++#define CFG_ENV_OFFSET 0x21000
++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
++#define CFG_ENV_SIZE 0x2000 /* 8 * 1056 really , but start.s is not OK with this*/
++> #else
++#define CONFIG_ENV_OFFSET 0x20000
++#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
++#endif
++#else
++#define CONFIG_ENV_IS_IN_FLASH 1
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */
++#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
++#else
++#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */
++#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */
++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
++#endif /* CONFIG_ENV_IS_IN_DATAFLASH */
++
++#if defined(CONFIG_AT91RM9200DK)
++#define DATAFLASH_MMC_SELECT AT91_PIN_PB7
++#else
++#define DATAFLASH_MMC_SELECT AT91_PIN_PB22
++#endif
++
++#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
++
++#ifdef CONFIG_SKIP_LOWLEVEL_INIT
++#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */
++#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
++#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */
++#else
++#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */
++#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
++#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */
++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
++
++#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 }
++
++#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
++#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
++#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
++
++#define CONFIG_SYS_HZ 1000
++#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
++ /* AT91C_TC_TIMER_DIV1_CLOCK */
++
++#define CONFIG_STACKSIZE (32*1024) /* regular stack */
++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
++#define CONFIG_STACKSIZE_FIQ (4*1024)
++
++#ifdef CONFIG_USE_IRQ
++#error CONFIG_USE_IRQ not supported
++#endif
++#endif
+diff -urN u-boot-2009.01-0rig/Makefile u-boot-2009.01/Makefile
+--- u-boot-2009.01-0rig/Makefile 2009-01-02 10:03:11.000000000 +0100
++++ u-boot-2009.01/Makefile 2009-01-01 21:31:34.000000000 +0100
+@@ -2568,6 +2568,12 @@
+ at91rm9200dk_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
+
++at91rm9200df_config : unconfig
++ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
++
++at91rm9200ek_config : unconfig
++ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
++
+ cmc_pu2_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
+
diff --git a/target/u-boot/Config.in b/target/u-boot/Config.in
index 815948524..a91820cf8 100644
--- a/target/u-boot/Config.in
+++ b/target/u-boot/Config.in
@@ -1,9 +1,56 @@
-config BR2_TARGET_UBOOT
+config BR2_TARGET_CUSTOM_UBOOT
+ bool
+ help
+ A target can "select" this to disable
+ the build of vanilla u-boot.
+
+menuconfig BR2_TARGET_UBOOT
bool "Das U-Boot Boot Monitor"
- depends on !BR2_TARGET_AT91
+ depends on !BR2_TARGET_CUSTOM_UBOOT
help
Build "Das U-Boot" Boot Monitor
+if BR2_TARGET_UBOOT
+choice
+ prompt "U-Boot Version"
+ default BR2_TARGET_UBOOT_2009_01_RC1
+ help
+ Select the specific Linux version you want to use
+
+config BR2_TARGET_UBOOT_2009_01_RC1
+ bool "u-boot-2009.01-rc1"
+ depends on BR2_TARGET_UBOOT
+ help
+ Use u-boot from December 2008 (RC1)
+
+config BR2_TARGET_UBOOT_2008_10
+ bool "u-boot-2008.10"
+ depends on BR2_TARGET_UBOOT
+ help
+ Use u-boot from October 2008
+
+config BR2_TARGET_UBOOT_1_3_4
+ bool "u-boot-1.3.4"
+ depends on BR2_TARGET_UBOOT
+ help
+ Use u-boot from mid 2008
+
+config BR2_TARGET_UBOOT_2009_01
+ bool "u-boot-2009.01"
+ depends on BR2_TARGET_UBOOT
+ help
+ Use u-boot from January 2009
+ Release date 2009-01-17
+
+endchoice
+
+config BR2_UBOOT_VERSION
+ string
+ default "2009.01-rc1" if BR2_TARGET_UBOOT_2009_01_RC1
+ default "2008.10" if BR2_TARGET_UBOOT_2008_10
+ default "1.3.4" if BR2_TARGET_UBOOT_1_3_4
+ default "2009.01" if BR2_TARGET_UBOOT_2009_01
+
config BR2_TARGET_UBOOT_BOARDNAME
string "board name"
depends on BR2_TARGET_UBOOT
@@ -19,6 +66,62 @@ config BR2_TARGET_UBOOT_CUSTOM_PATCH
If your board requires a custom patch, add the path to the file here.
Most users may leave this empty
+choice
+ prompt "Bootsource"
+ depends on BR2_BOOTSOURCE
+ default BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
+
+ config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
+ bool "Boot from dataflashcard"
+ depends on BR2_BOOTSOURCE_DATAFLASHCARD
+ help
+
+
+ config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+ bool "Boot from dataflash
+ depends on BR2_BOOTSOURCE_DATAFLASH
+ help
+
+
+ config BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
+ bool "Boot from a NAND flash"
+ depends on BR2_BOOTSOURCE_NANDFLASH
+ help
+ Build u-boot with environment in the NAND flash
+
+ config BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
+ bool "Boot from a parallell flash"
+ depends on BR2_BOOTSOURCE_FLASH
+ help
+ Build u-boot with environment in a flash RAM
+
+ config BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
+ bool "Boot from a NAND flash"
+ depends on BR2_BOOTSOURCE_SDCARD
+ help
+ Build u-boot with environment on an SD-Card
+ Not yet supported
+
+ config BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
+ bool "Boot from a serial EEPROM"
+ depends on BR2_BOOTSOURCE_EEPROM
+ help
+ Build u-boot with environment in a serial EEPROM
+ Not yet supported
+
+
+endchoice
+
+config BR2_TARGET_UBOOT_BOOTSOURCE
+ string
+ depends on BR2_BOOTSOURCE
+ default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
+ default "dataflash" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
+ default "nandflash" if BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
+ default "flash" if BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
+ default "sdcard" if BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
+ default "eeprom" if BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
+
config BR2_TARGET_UBOOT_SERVERIP
string "server ip"
depends on BR2_TARGET_UBOOT
@@ -80,3 +183,45 @@ config BR2_TARGET_UBOOT_TOOL_ENV
depends on BR2_TARGET_UBOOT
help
Install fw_printenv / fw_setenv tools in target.
+endif
+
+config BR2_BOOTSOURCE_DATAFLASHCARD
+ bool
+ help
+ Allow use of a dataflashcard as a boot source
+
+config BR2_BOOTSOURCE_DATAFLASH
+ bool
+ help
+ Allow use of a dataflash as a boot source
+
+config BR2_BOOTSOURCE_NANDFLASH
+ bool
+ help
+ Allow use of a NAND flash as a boot source
+
+config BR2_BOOTSOURCE_FLASH
+ bool
+ help
+ Allow use of a flash RAM as a boot source
+
+config BR2_BOOTSOURCE_SDCARD
+ bool
+ help
+ Allow use of an SD-card as a boot source
+
+config BR2_BOOTSOURCE_EEPROM
+ bool
+ help
+ Allow use of a serial eeprom as a boot source
+
+config BR2_BOOTSOURCE
+ bool
+ default y if BR2_BOOTSOURCE_DATAFLASHCARD
+ default y if BR2_BOOTSOURCE_DATAFLASH
+ default y if BR2_BOOTSOURCE_NANDFLASH
+ default y if BR2_BOOTSOURCE_FLASH
+ default y if BR2_BOOTSOURCE_SDCARD
+ default y if BR2_BOOTSOURCE_EEPROM
+ default n
+
diff --git a/target/u-boot/Makefile.in b/target/u-boot/Makefile.in
index 001bc8881..8565f2e9d 100644
--- a/target/u-boot/Makefile.in
+++ b/target/u-boot/Makefile.in
@@ -3,16 +3,24 @@
# U-Boot
#
#############################################################
-U_BOOT_VERSION:=1.3.4
+U_BOOT_VERSION:=$(strip $(subst ",,$(BR2_UBOOT_VERSION)))
+#"))
+
U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot
U_BOOT_DIR:=$(PROJECT_BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
U_BOOT_PATCH_DIR:=$(PROJECT_BUILD_DIR)/u-boot-patches
U_BOOT_CAT:=$(BZCAT)
U_BOOT_BIN:=u-boot.bin
+U_BOOT_TARGET:=$(BOARD_NAME)-u-boot-$(U_BOOT_VERSION)-$(DATE).bin
U_BOOT_TOOLS_BIN:=mkimage
+U_BOOT_TOOLS:=$(STAGING_DIR)/usr/bin/$(U_BOOT_TOOLS_BIN)
# u-boot still uses arch=ppc for powerpc
U_BOOT_ARCH=$(KERNEL_ARCH:powerpc=ppc)
+ifeq ($(UBOOT_BOARD_NAME),"")
+UBOOT_BOARD_NAME:=$(strip $(subst ",,$(BR2_TARGET_UBOOT_BOARDNAME)))
+#"))
+endif
ifneq ($(BR2_TARGET_U_BOOT_CONFIG_BOARD),)
U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/configs/$(subst _config,,$(BR2_TARGET_U_BOOT_CONFIG_BOARD)).h
@@ -46,7 +54,7 @@ $(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE)
touch $@
$(U_BOOT_DIR)/.patched: $(U_BOOT_DIR)/.unpacked
- toolchain/patch-kernel.sh $(U_BOOT_DIR) target/u-boot/ \
+ toolchain/patch-kernel.sh $(U_BOOT_DIR) target/u-boot/$(U_BOOT_VERSION) \
u-boot-$(U_BOOT_VERSION)-\*.patch \
u-boot-$(U_BOOT_VERSION)-\*.patch.$(ARCH)
ifneq ($(strip $(BR2_TARGET_UBOOT_CUSTOM_PATCH)),"")
@@ -67,7 +75,7 @@ $(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.header_copied
CFLAGS="$(TARGET_CFLAGS)" \
LDFLAGS="$(TARGET_LDFLAGS)" \
$(MAKE) -C $(U_BOOT_DIR) \
- $(BR2_TARGET_UBOOT_BOARDNAME)_config
+ $(UBOOT_BOARD_NAME)_config
touch $@
$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
@@ -120,7 +128,12 @@ $(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified
-C $(U_BOOT_DIR)
$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN)
- cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)
+ rm -f $(BINARIES_DIR)/$(U_BOOT_TARGET)
+ rm -f $(BINARIES_DIR)/$(U_BOOT_BIN)
+ cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)/$(U_BOOT_TARGET)
+ (cd $(BINARIES_DIR); ln -s $(U_BOOT_TARGET) $(U_BOOT_BIN))
+
+$(U_BOOT_TOOLS): $(U_BOOT_DIR)/tools/$(U_BOOT_TOOLS_BIN)
cp -dpf $(U_BOOT_DIR)/tools/$(U_BOOT_TOOLS_BIN) $(STAGING_DIR)/usr/bin/
$(TARGET_DIR)/usr/bin/mkimage: $(U_BOOT_DIR)/$(U_BOOT_BIN)
@@ -138,11 +151,11 @@ $(TARGET_DIR)/usr/sbin/fw_printenv: $(U_BOOT_DIR)/$(U_BOOT_BIN)
$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $@
ln -sf fw_printenv $(TARGET_DIR)/usr/sbin/fw_setenv
-u-boot: $(BINARIES_DIR)/$(U_BOOT_BIN) $(U_BOOT_TARGET_TOOLS)
+u-boot: $(BINARIES_DIR)/$(U_BOOT_BIN) $(U_BOOT_TOOLS) $(U_BOOT_TARGET_TOOLS)
u-boot-clean:
-$(MAKE) -C $(U_BOOT_DIR) clean
- rm -f $(STAGING_DIR)/usr/bin/$(U_BOOT_TOOLS_BIN) $(U_BOOT_TARGET_TOOLS)
+ rm -f $(U_BOOT_TOOLS) $(U_BOOT_TARGET_TOOLS)
u-boot-dirclean:
rm -rf $(U_BOOT_DIR)
@@ -161,7 +174,7 @@ endif
u-boot-status:
@echo
@echo U_BOOT_INC_CONF_FILE = $(U_BOOT_INC_CONF_FILE)
- @echo
+ @echo BR2_UBOOT_VERSION = $(BR2_UBOOT_VERSION)
@echo BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE = $(BR2_TARGET_U_BOOT_CONFIG_HEADER_FILE)
@echo BR2_TARGET_U_BOOT_CONFIG_BOARD = $(BR2_TARGET_U_BOOT_CONFIG_BOARD)
@echo BR2_TARGET_UBOOT_SERVERIP = $(BR2_TARGET_UBOOT_SERVERIP)
@@ -173,5 +186,14 @@ u-boot-status:
@echo BR2_TARGET_UBOOT_BOOTARGS = $(BR2_TARGET_UBOOT_BOOTARGS)
@echo BR2_TARGET_UBOOT_BOOTCMD = $(BR2_TARGET_UBOOT_BOOTCMD)
@echo BR2_TARGET_UBOOT_SILENT = $(BR2_TARGET_UBOOT_SILENT)
- @echo
+ @echo BR2_BOOTSOURCE=$(BR2_BOOTSOURCE)
+ @echo BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD=$(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD)
+ @echo BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH=$(BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH)
+ @echo BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH=$(BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH)
+ @echo BR2_TARGET_UBOOT_BOOTSOURCE_FLASH=$(BR2_TARGET_UBOOT_BOOTSOURCE_FLASH)
+ @echo BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD=$(BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD)
+ @echo BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM=$(BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM)
+ @echo UBOOT_BOARD_NAME=$(UBOOT_BOARD_NAME)
+ @echo TEST=$(TEST)
@exit 0
+