bootloaders: move bootloader build code to boot/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

1 files changed, 0 insertions, 378 deletions

diff --git a/target/u-boot/Config.in b/target/u-boot/Config.in
deleted file mode 100644
index ca47e18f9..000000000
--- a/target/u-boot/Config.in
+++ /dev/null
@@ -1,378 +0,0 @@
-menuconfig BR2_TARGET_UBOOT
-	bool "Das U-Boot Boot Monitor"
-	help
-	  Build "Das U-Boot" Boot Monitor
-
-if BR2_TARGET_UBOOT
-config BR2_TARGET_UBOOT_BOARDNAME
-	string "board name"
-	default "$(BOARD_NAME)"
-	help
-	  One of U-Boot supported boards to be built.
-	  This will be suffixed with _config to meet U-Boot standard naming.
-
-choice
-	prompt "U-Boot Version"
-	default BR2_TARGET_UBOOT_2010_03
-	help
-	  Select the specific U-Boot version you want to use
-
-config BR2_TARGET_UBOOT_2010_03
-	bool "u-boot-2010.03"
-
-config BR2_TARGET_UBOOT_2009_11
-	bool "u-boot-2009.11"
-
-config BR2_TARGET_UBOOT_2009_08
-	bool "u-boot-2009.08"
-
-config BR2_TARGET_UBOOT_2009_06
-	bool "u-boot-2009.06"
-	depends on BR2_DEPRECATED
-
-config BR2_TARGET_UBOOT_2009_03
-	bool "u-boot-2009.03"
-	depends on BR2_DEPRECATED
-
-config BR2_TARGET_UBOOT_2009_01
-	bool "u-boot-2009.01"
-	depends on BR2_DEPRECATED
-
-config BR2_TARGET_UBOOT_2008_10
-	bool "u-boot-2008.10"
-	depends on BR2_DEPRECATED
-
-config BR2_TARGET_UBOOT_1_2_0_ATMEL
-	bool "u-boot-1.2.0-atmel"
-	depends on BR2_TARGET_AT91
-
-endchoice
-
-config BR2_UBOOT_VERSION
-	string
-	default "2010.03"	if BR2_TARGET_UBOOT_2010_03
-	default "2009.11"	if BR2_TARGET_UBOOT_2009_11
-	default "2009.08"	if BR2_TARGET_UBOOT_2009_08
-	default "2009.06"	if BR2_TARGET_UBOOT_2009_06
-	default "2009.03"	if BR2_TARGET_UBOOT_2009_03
-	default "2009.01"	if BR2_TARGET_UBOOT_2009_01
-	default "2008.10"	if BR2_TARGET_UBOOT_2008_10
-	default "1.2.0-atmel"	if BR2_TARGET_UBOOT_1_2_0_ATMEL
-
-config BR2_U_BOOT_SITE
-	string
-	default "$(BR2_ATMEL_MIRROR)"		if BR2_TARGET_UBOOT_1_2_0_ATMEL
-	default "ftp://ftp.denx.de/pub/u-boot"
-
-source "target/device/Config.in.u-boot"
-
-config BR2_TARGET_UBOOT_CUSTOM_PATCH
-	string "custom patch"
-	help
-	  If your board requires a custom patch, add the path to the file here.
-	  Most users may leave this empty
-
-choice
-	prompt "Bootsource"
-	depends on BR2_BOOTSOURCE
-	default BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
-
-	config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
-	bool "Boot from dataflashcard"
-	depends on BR2_BOOTSOURCE_DATAFLASHCARD
-
-	config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
-	bool "Boot from dataflash"
-	depends on BR2_BOOTSOURCE_DATAFLASH
-
-	config BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
-	bool "Boot from a NAND flash"
-	depends on BR2_BOOTSOURCE_NANDFLASH
-
-	config BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
-	bool "Boot from a parallell flash"
-	depends on BR2_BOOTSOURCE_FLASH
-
-	config BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
-	bool "Boot from an SD-Card"
-	depends on BR2_BOOTSOURCE_SDCARD
-
-	config BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
-	bool "Boot from a serial EEPROM (Not yet supported)"
-	depends on BR2_BOOTSOURCE_EEPROM
-
-endchoice
-
-config BR2_TARGET_UBOOT_BOOTSOURCE
-	string
-	depends on BR2_BOOTSOURCE
-	default "dataflash"	if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
-	default "dataflash"	if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
-	default "nandflash"	if BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
-	default "flash"		if BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
-	default "sdcard"	if BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
-	default "eeprom"	if BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
-
-config BR2_TARGET_UBOOT_SILENT
-	bool "silent console"
-	help
-	  If the option has been enabled, the output can be
-	  silenced by setting the environment variable "silent".
-
-config BR2_TARGET_UBOOT_TOOL_MKIMAGE
-	bool "mkimage tool in target"
-	help
-	  Install mkimage tool in target.
-
-config BR2_TARGET_UBOOT_TOOL_ENV
-	bool "fw_printenv tool in target"
-	help
-	  Install fw_printenv / fw_setenv tools in target.
-
-menuconfig BR2_TARGET_UBOOT_DEFAULT_ENV
-	bool "Generate a default environment"
-	help
-	  Will generate variables for factory default command
-	  and autoscript.
-
-if BR2_TARGET_UBOOT_DEFAULT_ENV
-choice
-	prompt "SDRAM Memory size"
-	default BR2_TARGET_UBOOT_SDRAM_SIZE_64M
-	help
-	  Size of the onboard SDRAM
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_256MB
-	bool "256 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_128MB
-	bool "128 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_64MB
-	bool "64 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_32MB
-	bool "32 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_16MB
-	bool "16 MB"
-
-config BR2_TARGET_UBOOT_SDRAM_SIZE_8MB
-	bool "8 MB"
-
-endchoice
-
-config BR2_TARGET_UBOOT_MEMORY_SIZE
-	string
-	default "256M"	if BR2_TARGET_UBOOT_SDRAM_SIZE_256MB
-	default "128M"	if BR2_TARGET_UBOOT_SDRAM_SIZE_128MB
-	default "64M"	if BR2_TARGET_UBOOT_SDRAM_SIZE_64MB
-	default "32M"	if BR2_TARGET_UBOOT_SDRAM_SIZE_32MB
-	default "16M"	if BR2_TARGET_UBOOT_SDRAM_SIZE_16MB
-	default "8M"	if BR2_TARGET_UBOOT_SDRAM_SIZE_8MB
-
-choice
-	prompt "Kernel Size"
-	default BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
-	bool "Kernel size is less than 1.25 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
-	bool "Kernel size is less than 1.50 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
-	bool "Kernel size is less than 1.75 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
-	bool "Kernel size is less than 2.00 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
-	bool "Kernel size is less than 2.25 MB"
-
-config BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
-	bool "Kernel size is less than 2.50 MB"
-
-endchoice
-
-choice
-	prompt "Dataflash Size"
-	depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
-	default BR2_TARGET_UBOOT_DATAFLASH_SIZE_2_00MB
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB
-	bool "Dataflash size is 8 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB
-	bool "Dataflash size is 4 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB
-	bool "Dataflash size is 2 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB
-	bool "Dataflash size is 1 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB
-	bool "Dataflash size is 0.5 MB"
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB
-	bool "Dataflash size is 0.25 MB"
-
-endchoice
-
-config BR2_TARGET_UBOOT_DATAFLASH_SIZE
-	string
-	depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
-	default "8M"	if BR2_TARGET_DATAFLASH_SIZE_8MB
-	default "4M"	if BR2_TARGET_DATAFLASH_SIZE_4MB
-	default "2M"	if BR2_TARGET_DATAFLASH_SIZE_2MB
-	default "1M"	if BR2_TARGET_DATAFLASH_SIZE_1MB
-	default "0.5M"	if BR2_TARGET_DATAFLASH_SIZE_0_50MB
-	default "0.25M"	if BR2_TARGET_DATAFLASH_SIZE_0_25MB
-
-config BR2_TARGET_UBOOT_END_OF_FLASH
-	string
-	depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
-	default "C083FFFF" if  BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB
-	default "C041FFFF" if  BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB
-	default "C020FFFF" if  BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB
-	default "C0107FFF" if  BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB
-	default "C0083FFF" if  BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB
-	default "C0041FFF" if  BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB
-	help
-
-config BR2_TARGET_UBOOT_KERNEL_START
-	string "Kernel SDRAM address"
-	default "21000000"
-	help
-	  Kernel is loaded to this address in SDRAM
-
-config BR2_TARGET_UBOOT_KERNEL_LOCATION
-	string "Kernel flash address"
-	depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \
-			BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
-	default "C0042000" if BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
-	default ""
-	help
-	  Kernel location in dataflash
-
-config BR2_TARGET_UBOOT_FILESYSTEM_START
-	string
-	default "2114A000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
-	default "2118C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
-  	default "211CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
-  	default "21210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
-  	default "21252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
-  	default "21294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
-	help
-	  Kernel is loaded to this SDRAM address
-	  Assumes SDRAM starts at 20000000
-	  Will need to be updated if the SDRAM is located elsewhere
-
-config BR2_TARGET_UBOOT_FILESYSTEM_LOCATION
-	string
-	depends on BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD || \
-			BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
-	default "C018C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
-  	default "C01CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
-  	default "C0210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
-  	default "C0252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
-  	default "C0294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
-  	default "C02D6000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
-	help
-	  Determine location for File System in Dataflash
-	  This needs to be updated for other memory technologies
-
-config BR2_TARGET_UBOOT_FILESYSTEM_SIZE
-	string "File System Size"
-	default "6000000"
-	help
-
-menuconfig BR2_TARGET_UBOOT_NETWORK
-	bool "Network Settings"
-	default y
-	help
-	  Network settings for U-boot
-
-if BR2_TARGET_UBOOT_NETWORK
-
-config BR2_TARGET_UBOOT_SERVERIP
-	string "server ip"
-	default "10.175.196.221"
-	help
-	  TFTP server ip address
-
-config BR2_TARGET_UBOOT_IPADDR
-	string "ip address"
-	default "10.175.196.18"
-	help
-	  Target ip address
-
-config BR2_TARGET_UBOOT_GATEWAY
-	string "gateway ip"
-	default "10.175.196.1"
-	help
-	  Gateway ip address
-
-config BR2_TARGET_UBOOT_NETMASK
-	string "netmask"
-	default "255.255.255.0"
-	help
-	  Network Mask
-
-config BR2_TARGET_UBOOT_ETHADDR
-	string "ethernet address"
-	default "04:25:fe:ed:00:18"
-	help
-	  Target MAC address for the ethernet interface.
-	  This should be changed for production units
-
-config BR2_TARGET_UBOOT_ETH1ADDR
-	string "ethernet 2 address"
-	help
-	  Target MAC address for the second ethernet interface.
-
-endif # BR2_TARGET_UBOOT_NETWORK
-
-endif # BR2_TARGET_UBOOT_DEFAULT_ENV
-
-endif # BR2_TARGET_UBOOT
-
-config BR2_BOOTSOURCE_DATAFLASHCARD
-	bool
-	help
-	  Allow use of a dataflashcard as a boot source
-
-config BR2_BOOTSOURCE_DATAFLASH
-	bool
-	help
-	  Allow use of a dataflash as a boot source
-
-config BR2_BOOTSOURCE_NANDFLASH
-	bool
-	help
-	  Allow use of a NAND flash as a boot source
-
-config BR2_BOOTSOURCE_FLASH
-	bool
-	help
-	  Allow use of a flash RAM as a boot source
-
-config BR2_BOOTSOURCE_SDCARD
-	bool
-	help
-	  Allow use of an SD-card as a boot source
-
-config BR2_BOOTSOURCE_EEPROM
-	bool
-	help
-	  Allow use of a serial eeprom as a boot source
-
-config	BR2_BOOTSOURCE
-	bool
-	default y if BR2_BOOTSOURCE_DATAFLASHCARD
-	default y if BR2_BOOTSOURCE_DATAFLASH
-	default y if BR2_BOOTSOURCE_NANDFLASH
-	default y if BR2_BOOTSOURCE_FLASH
-	default y if BR2_BOOTSOURCE_SDCARD
-	default y if BR2_BOOTSOURCE_EEPROM