blob: 926f6344cd1c6b91cbc1e33babb693fff969eadc (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
|
/*
* main_xula2.v
*
* Copyright: (C) 2013 LeafLabs, LLC
* License: MIT License (See LICENSE file)
* Author: Bryan Newbold <bnewbold@leaflabs.com>
* Date: October 2013
*
* This is the top-level module for the Xess Corp Xula 2 development board.
*
* TODO if using this as a template for another design:
* - use a clock buffer, even if sticking with 12mhz
*/
module main (
input wire clock_12mhz,
inout wire [31:0] chan,
inout wire chan_clk,
//// Flash and microSD I/O
output wire microsd_cs,
output wire flash_cs,
output wire flash_sclk,
output wire flash_mosi,
output wire flash_miso
);
wire reset;
assign reset = chan[0];
reg [22:0] throb_counter = 0;
reg throb_led = 0;
assign chan[10] = throb_led;
always @(posedge clock_12mhz) begin
if (reset) begin
throb_counter <= 0;
throb_led <= 0;
end else begin
if (throb_counter >= 23'd06_000_000) begin
throb_led <= !throb_led;
throb_counter <= 23'd0;
end else begin
throb_counter <= throb_counter + 23'd1;
end
end
end
// Tie off unused outputs
assign microsd_cs = 1'bZ;
assign flash_cs = 1'bZ;
assign flash_sclk = 1'bZ;
assign flash_mosi = 1'bZ;
assign flash_miso = 1'bZ;
assign chan[31] = 1'bz;
/*
assign chan[31:21] = 11'bZ;
assign chan[19:1] = 19'bZ;
assign chan_clk = 1'bZ;
*/
endmodule
|