1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
|
# File : uap.conf
ap_config={
SSID="Marvell Micro AP" # SSID of Micro AP
BeaconPeriod=100 # Beacon period in TU
Channel=6 # Radio Channel 6
# Channel=0,1 # auto channel select (MCS mode)
ChanList=1,6,11 # Scan channel list
# AP_MAC=00:34:22:77:46:41 # MAC address of AP
RxAntenna=0 # 0 for Antenna A
# 1 for Antenna B
TxAntenna=0 # 0 for Antenna A
# 1 for Antenna B
Rate=0x82,0x84,0x8b,0x96,0x0C,0x12,0x18,0x24,0x30,0x48,0x60,0x6c
# Set of data rate that a station
# in the BSS may use
# (in unit of 500 kilobit/s)
TxPowerLevel=13 # Transmit power level in dBm
BroadcastSSID=1 # Broadcast SSID feature
# 1: Enable 0:Disable
RTSThreshold=2347 # RTS threshold value
FragThreshold=2346 # Fragmentation threshold value
DTIMPeriod=1 # DTIM period in beacon periods
RadioControl=1 # 0: radio on 1: radio off
MCBCdataRate=0 # MCBC rate to use for packet transmission
# 0:auto
# >0 fix rate (in unit of 500 kilobit/s)
TxDataRate=0 # Data rate to use for packet transmission
# 0:auto
# >0 fix rate (in unit of 500 kilobit/s)
PktFwdCtl=1 # Packet forwarding control
# 0: forward all packets to the host
# 1: firmware handles intr-BSS packets
StaAgeoutTimer=1800 # Inactive client station age out timer value
# in units of 100ms
MaxStaNum=8 # Max number of stations allowed to connect
Retrylimit=7 # Retry limit to use for packet transmissions
AuthMode=0 # 0:Open authentication
# 1:shared key authentication
# 2: Static WEP
Protocol=1 # protocol to use
# 1: No security 2: Static WEP
# 8: WPA 32: WPA2 40:WPA2 Mixed Mode
RSNReplayProtection=0 # RSN replay protection 0: disabled, 1: enabled
# **** WEP security setting******
# KeyIndex=0 # Index of WEP key to use (0 to 3)
# Sample Key configurations are
# Key_0="55555"
# Key_1=1234567890
# Key_2="1234567890123"
# Key_3=12345678901234567890123456
# **** WPA/WPA2 PSK setting******
# PairwiseCipher=4 # Pairwise cipher type
# 0: None
# 4: TKIP 8: AES CCMP
# 12: AES CCMP + TKIP
# GroupCipher=4 # group cipher type
# 0: None
# 4: TKIP 8: AES CCMP
# PSK="1234567890" # WPA/WPA2 passphrase
GroupRekeyTime= 86400 # Group key re-key interval, in second.
# 0 mean never re-key
#802.11D specific configuration
11d_enable=0 # 0-disable 1-enable
# country=US # country information
}
ap_mac_filter={
FilterMode=0 # Mode of filter table
# 0: filter table is disabled
# 1: allow MAC address in the filter table to associate
# 2: block MAC address in the filter table
Count=0 # Number of entries in filter table,up to 16
#Sample mac settings are
# mac_1=00:50:23:45:76:22 # mac address
# mac_2=00:34:22:77:46:34 # mac address
}
#custom_ie_config={
# MgmtSubtypeMask_0=0x1
# IEBuffer_0=0x6403736976
# MgmtSubtypeMask_1=0x2
# IEBuffer_1=0x650473697661
# MgmtSubtypeMask_2=0x4
# IEBuffer_2=0x6606736976617273
# MgmtSubtypeMask_3=0x8
# IEBuffer_3=0x6606736976617573
#}
|
