diff options
Diffstat (limited to 'packages/torouter-prep/configs/torrc')
| -rw-r--r-- | packages/torouter-prep/configs/torrc | 180 |
1 files changed, 0 insertions, 180 deletions
diff --git a/packages/torouter-prep/configs/torrc b/packages/torouter-prep/configs/torrc deleted file mode 100644 index 5023d57..0000000 --- a/packages/torouter-prep/configs/torrc +++ /dev/null @@ -1,180 +0,0 @@ -## Configuration file for a typical Tor user -## Last updated 12 April 2009 for Tor 0.2.1.14-rc. -## (May or may not work for much older or much newer versions of Tor.) -## -## Lines that begin with "## " try to explain what's going on. Lines -## that begin with just "#" are disabled commands: you can enable them -## by removing the "#" symbol. -## -## See 'man tor', or https://www.torproject.org/tor-manual.html, -## for more options you can use in this file. -## -## Tor will look for this file in various places based on your platform: -## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#torrc - - -## Replace this with "SocksPort 0" if you plan to run Tor only as a -## relay, and not make any local application connections yourself. -SocksPort 9050 # what port to open for local application connections -SocksListenAddress 127.0.0.1 # accept connections only from localhost -#SocksListenAddress 192.168.0.1:9100 # listen on this IP:port also - -## Entry policies to allow/deny SOCKS requests based on IP address. -## First entry that matches wins. If no SocksPolicy is set, we accept -## all (and only) requests from SocksListenAddress. -#SocksPolicy accept 192.168.0.0/16 -#SocksPolicy reject * - -## Logs go to stdout at level "notice" unless redirected by something -## else, like one of the below lines. You can have as many Log lines as -## you want. -## -## We advise using "notice" in most cases, since anything more verbose -## may provide sensitive information to an attacker who obtains the logs. -## -## Send all messages of level 'notice' or higher to /var/log/tor/notices.log -Log notice file /var/log/tor/notices.log -## Send every possible message to /var/log/tor/debug.log -#Log debug file /var/log/tor/debug.log -## Use the system log instead of Tor's logfiles -#Log notice syslog -## To send all messages to stderr: -#Log debug stderr - -## Uncomment this to start the process in the background... or use -## --runasdaemon 1 on the command line. This is ignored on Windows; -## see the FAQ entry if you want Tor to run as an NT service. -RunAsDaemon 1 - -## The directory for keeping all the keys/etc. By default, we store -## things in $HOME/.tor on Unix, and in Application Data\tor on Windows. -DataDirectory /var/lib/tor - -## The port on which Tor will listen for local connections from Tor -## controller applications, as documented in control-spec.txt. -#ControlPort 9051 -## If you enable the controlport, be sure to enable one of these -## authentication methods, to prevent attackers from accessing it. -#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C -#CookieAuthentication 1 - -############### This section is just for location-hidden services ### - -## Once you have configured a hidden service, you can look at the -## contents of the file ".../hidden_service/hostname" for the address -## to tell people. -## -## HiddenServicePort x y:z says to redirect requests on port x to the -## address y:z. - -# Uncomment this to allow ssh access to the Torouter over your own Hidden Service -#HiddenServiceDir /var/lib/tor/hidden_service/ -#HiddenServicePort 22 127.0.0.1:22 - -#HiddenServiceDir /var/lib/tor/other_hidden_service/ -#HiddenServicePort 80 127.0.0.1:80 -#HiddenServicePort 22 127.0.0.1:22 - -################ This section is just for relays ##################### -# -## See https://www.torproject.org/docs/tor-doc-relay for details. - -### Required: what port to advertise for incoming Tor connections. -ORPort auto -## If you want to listen on a port other than the one advertised -## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment the -## line below too. You'll need to do ipchains or other port forwarding -## yourself to make this work. -#ORListenAddress 0.0.0.0:9090 -#ORListenAddress 0.0.0.0:9090 -Nickname Torouter - -## The IP address or full DNS name for your relay. Leave commented out -## and Tor will guess. -#Address noname.example.com - -## Define these to limit how much relayed traffic you will allow. Your -## own traffic is still unthrottled. Note that RelayBandwidthRate must -## be at least 20 KBytes. -RelayBandwidthRate 50KB -RelayBandwidthBurst 75KB - -## Contact info to be published in the directory, so we can contact you -## if your relay is misconfigured or something else goes wrong. Google -## indexes this, so spammers might also collect it. -#ContactInfo Random Person <nobody AT example dot com> -## You might also include your PGP or GPG fingerprint if you have one: -#ContactInfo 1234D/FFFFFFFF Random Person <nobody AT example dot com> - -## Uncomment this to mirror directory information for others. Please do -## if you have enough bandwidth. -#DirPort 9030 # what port to advertise for directory connections -## If you want to listen on a port other than the one advertised -## in DirPort (e.g. to advertise 80 but bind to 9091), uncomment the line -## below too. You'll need to do ipchains or other port forwarding yourself -## to make this work. -#DirListenAddress 0.0.0.0:9091 -## Uncomment to return an arbitrary blob of html on your DirPort. Now you -## can explain what Tor is if anybody wonders why your IP address is -## contacting them. See contrib/tor-exit-notice.html for a sample. -#DirPortFrontPage /etc/tor/exit-notice.html - -## Uncomment this if you run more than one Tor relay, and add the identity -## key fingerprint of each Tor relay you control, even if they're on -## different networks. You declare it here so Tor clients can avoid -## using more than one of your relays in a single circuit. See -## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#MultipleServers -#MyFamily $keyid,$keyid,... - -## A comma-separated list of exit policies. They're considered first -## to last, and the first match wins. If you want to _replace_ -## the default exit policy, end this with either a reject *:* or an -## accept *:*. Otherwise, you're _augmenting_ (prepending to) the -## default exit policy. Leave commented to just use the default, which is -## described in the man page or at -## https://www.torproject.org/documentation.html -## -## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses -## for issues you might encounter if you use the default exit policy. -## -## If certain IPs and ports are blocked externally, e.g. by your firewall, -## you should update your exit policy to reflect this -- otherwise Tor -## users will be told that those destinations are down. -## -#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more -#ExitPolicy accept *:119 # accept nntp as well as default exit policy -#ExitPolicy reject *:* # no exits allowed -# -## Bridge relays (or "bridges") are Tor relays that aren't listed in the -## main directory. Since there is no complete public list of them, even if an -## ISP is filtering connections to all the known Tor relays, they probably -## won't be able to block all the bridges. Also, websites won't treat you -## differently because they won't know you're running Tor. If you can -# be a real relay, please do; but if not, be a bridge! -BridgeRelay 1 -ExitPolicy reject *:* - -AvoidDiskWrites 1 - -# middle box stuff -VirtualAddrNetwork 10.192.0.0/10 -AutomapHostsOnResolve 1 -TransPort 9040 -TransListenAddress 172.16.23.1 -DNSPort 5353 -DNSListenAddress 172.16.23.1 -# If you disable unbound, you may enable this -#DNSListenAddress 127.0.0.1:53 - -User debian-tor - -# By default we do not have PortForwarding support -# PortForwarding 1 -# PortForwardingHelper /usr/local/bin/tor-fw-helper - -PIDFile /var/run/tor/tor.pid - -ControlPort 9051 -ControlListenAddress 127.0.0.1:9051 -CookieAuthentication 1 - |