diff options
Diffstat (limited to 'code/bspc/aasfile.h')
| -rw-r--r-- | code/bspc/aasfile.h | 252 |
1 files changed, 0 insertions, 252 deletions
diff --git a/code/bspc/aasfile.h b/code/bspc/aasfile.h deleted file mode 100644 index 09979c2..0000000 --- a/code/bspc/aasfile.h +++ /dev/null @@ -1,252 +0,0 @@ -/* -=========================================================================== -Copyright (C) 1999-2005 Id Software, Inc. - -This file is part of Quake III Arena source code. - -Quake III Arena source code is free software; you can redistribute it -and/or modify it under the terms of the GNU General Public License as -published by the Free Software Foundation; either version 2 of the License, -or (at your option) any later version. - -Quake III Arena source code is distributed in the hope that it will be -useful, but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with Quake III Arena source code; if not, write to the Free Software -Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -=========================================================================== -*/ - - -//NOTE: int = default signed -// default long - -#define AASID (('S'<<24)+('A'<<16)+('A'<<8)+'E') -#define AASVERSION_OLD 4 -#define AASVERSION 5 - -//presence types -#define PRESENCE_NONE 1 -#define PRESENCE_NORMAL 2 -#define PRESENCE_CROUCH 4 - -//travel types -#define MAX_TRAVELTYPES 32 -#define TRAVEL_INVALID 1 //temporary not possible -#define TRAVEL_WALK 2 //walking -#define TRAVEL_CROUCH 3 //crouching -#define TRAVEL_BARRIERJUMP 4 //jumping onto a barrier -#define TRAVEL_JUMP 5 //jumping -#define TRAVEL_LADDER 6 //climbing a ladder -#define TRAVEL_WALKOFFLEDGE 7 //walking of a ledge -#define TRAVEL_SWIM 8 //swimming -#define TRAVEL_WATERJUMP 9 //jump out of the water -#define TRAVEL_TELEPORT 10 //teleportation -#define TRAVEL_ELEVATOR 11 //travel by elevator -#define TRAVEL_ROCKETJUMP 12 //rocket jumping required for travel -#define TRAVEL_BFGJUMP 13 //bfg jumping required for travel -#define TRAVEL_GRAPPLEHOOK 14 //grappling hook required for travel -#define TRAVEL_DOUBLEJUMP 15 //double jump -#define TRAVEL_RAMPJUMP 16 //ramp jump -#define TRAVEL_STRAFEJUMP 17 //strafe jump -#define TRAVEL_JUMPPAD 18 //jump pad -#define TRAVEL_FUNCBOB 19 //func bob - -//face flags -#define FACE_SOLID 1 //just solid at the other side -#define FACE_LADDER 2 //ladder -#define FACE_GROUND 4 //standing on ground when in this face -#define FACE_GAP 8 //gap in the ground -#define FACE_LIQUID 16 -#define FACE_LIQUIDSURFACE 32 - -//area contents -#define AREACONTENTS_WATER 1 -#define AREACONTENTS_LAVA 2 -#define AREACONTENTS_SLIME 4 -#define AREACONTENTS_CLUSTERPORTAL 8 -#define AREACONTENTS_TELEPORTAL 16 -#define AREACONTENTS_ROUTEPORTAL 32 -#define AREACONTENTS_TELEPORTER 64 -#define AREACONTENTS_JUMPPAD 128 -#define AREACONTENTS_DONOTENTER 256 -#define AREACONTENTS_VIEWPORTAL 512 - -//area flags -#define AREA_GROUNDED 1 //bot can stand on the ground -#define AREA_LADDER 2 //area contains one or more ladder faces -#define AREA_LIQUID 4 //area contains a liquid - -//aas file header lumps -#define AAS_LUMPS 14 -#define AASLUMP_BBOXES 0 -#define AASLUMP_VERTEXES 1 -#define AASLUMP_PLANES 2 -#define AASLUMP_EDGES 3 -#define AASLUMP_EDGEINDEX 4 -#define AASLUMP_FACES 5 -#define AASLUMP_FACEINDEX 6 -#define AASLUMP_AREAS 7 -#define AASLUMP_AREASETTINGS 8 -#define AASLUMP_REACHABILITY 9 -#define AASLUMP_NODES 10 -#define AASLUMP_PORTALS 11 -#define AASLUMP_PORTALINDEX 12 -#define AASLUMP_CLUSTERS 13 - -//========== bounding box ========= - -//bounding box -typedef struct aas_bbox_s -{ - int presencetype; - int flags; - vec3_t mins, maxs; -} aas_bbox_t; - -//============ settings =========== - -//reachability to another area -typedef struct aas_reachability_s -{ - int areanum; //number of the reachable area - int facenum; //number of the face towards the other area - int edgenum; //number of the edge towards the other area - vec3_t start; //start point of inter area movement - vec3_t end; //end point of inter area movement - int traveltype; //type of travel required to get to the area - unsigned short int traveltime;//travel time of the inter area movement -} aas_reachability_t; - -//area settings -typedef struct aas_areasettings_s -{ - //could also add all kind of statistic fields - int contents; //contents of the convex area - int areaflags; //several area flags - int presencetype; //how a bot can be present in this convex area - int cluster; //cluster the area belongs to, if negative it's a portal - int clusterareanum; //number of the area in the cluster - int numreachableareas; //number of reachable areas from this one - int firstreachablearea; //first reachable area in the reachable area index -} aas_areasettings_t; - -//cluster portal -typedef struct aas_portal_s -{ - int areanum; //area that is the actual portal - int frontcluster; //cluster at front of portal - int backcluster; //cluster at back of portal - int clusterareanum[2]; //number of the area in the front and back cluster -} aas_portal_t; - -//cluster portal index -typedef int aas_portalindex_t; - -//cluster -typedef struct aas_cluster_s -{ - int numareas; //number of areas in the cluster - int numreachabilityareas; //number of areas with reachabilities - int numportals; //number of cluster portals - int firstportal; //first cluster portal in the index -} aas_cluster_t; - -//============ 3d definition ============ - -typedef vec3_t aas_vertex_t; - -//just a plane in the third dimension -typedef struct aas_plane_s -{ - vec3_t normal; //normal vector of the plane - float dist; //distance of the plane (normal vector * distance = point in plane) - int type; -} aas_plane_t; - -//edge -typedef struct aas_edge_s -{ - int v[2]; //numbers of the vertexes of this edge -} aas_edge_t; - -//edge index, negative if vertexes are reversed -typedef int aas_edgeindex_t; - -//a face bounds a convex area, often it will also seperate two convex areas -typedef struct aas_face_s -{ - int planenum; //number of the plane this face is in - int faceflags; //face flags (no use to create face settings for just this field) - int numedges; //number of edges in the boundary of the face - int firstedge; //first edge in the edge index - int frontarea; //convex area at the front of this face - int backarea; //convex area at the back of this face -} aas_face_t; - -//face index, stores a negative index if backside of face -typedef int aas_faceindex_t; - -//convex area with a boundary of faces -typedef struct aas_area_s -{ - int areanum; //number of this area - //3d definition - int numfaces; //number of faces used for the boundary of the convex area - int firstface; //first face in the face index used for the boundary of the convex area - vec3_t mins; //mins of the convex area - vec3_t maxs; //maxs of the convex area - vec3_t center; //'center' of the convex area -} aas_area_t; - -//nodes of the bsp tree -typedef struct aas_node_s -{ - int planenum; - int children[2]; //child nodes of this node, or convex areas as leaves when negative - //when a child is zero it's a solid leaf -} aas_node_t; - -//=========== aas file =============== - -//header lump -typedef struct -{ - int fileofs; - int filelen; -} aas_lump_t; - -//aas file header -typedef struct aas_header_s -{ - int ident; - int version; - int bspchecksum; - //data entries - aas_lump_t lumps[AAS_LUMPS]; -} aas_header_t; - - -//====== additional information ====== -/* - -- when a node child is a solid leaf the node child number is zero -- two adjacent areas (sharing a plane at opposite sides) share a face - this face is a portal between the areas -- when an area uses a face from the faceindex with a positive index - then the face plane normal points into the area -- the face edges are stored counter clockwise using the edgeindex -- two adjacent convex areas (sharing a face) only share One face - this is a simple result of the areas being convex -- the convex areas can't have a mixture of ground and gap faces - other mixtures of faces in one area are allowed -- areas with the AREACONTENTS_CLUSTERPORTAL in the settings have - cluster number zero -- edge zero is a dummy -- face zero is a dummy -- area zero is a dummy -- node zero is a dummy -*/ |