newlines fixed

git-svn-id: svn://svn.icculus.org/quake3/trunk@6 edf5b092-35ff-0310-97b2-ce42778d08ea

1 files changed, 512 insertions, 512 deletions

diff --git a/libs/jpeg6/jdmainct.cpp b/libs/jpeg6/jdmainct.cpp
index c4e0d54..f3a06e5 100755
--- a/libs/jpeg6/jdmainct.cpp
+++ b/libs/jpeg6/jdmainct.cpp
@@ -1,512 +1,512 @@
-/*

- * jdmainct.c

- *

- * Copyright (C) 1994-1995, Thomas G. Lane.

- * This file is part of the Independent JPEG Group's software.

- * For conditions of distribution and use, see the accompanying README file.

- *

- * This file contains the main buffer controller for decompression.

- * The main buffer lies between the JPEG decompressor proper and the

- * post-processor; it holds downsampled data in the JPEG colorspace.

- *

- * Note that this code is bypassed in raw-data mode, since the application

- * supplies the equivalent of the main buffer in that case.

- */

-

-#define JPEG_INTERNALS

-#include "jinclude.h"

-#include "jpeglib.h"

-

-

-/*

- * In the current system design, the main buffer need never be a full-image

- * buffer; any full-height buffers will be found inside the coefficient or

- * postprocessing controllers.  Nonetheless, the main controller is not

- * trivial.  Its responsibility is to provide context rows for upsampling/

- * rescaling, and doing this in an efficient fashion is a bit tricky.

- *

- * Postprocessor input data is counted in "row groups".  A row group

- * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)

- * sample rows of each component.  (We require DCT_scaled_size values to be

- * chosen such that these numbers are integers.  In practice DCT_scaled_size

- * values will likely be powers of two, so we actually have the stronger

- * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.)

- * Upsampling will typically produce max_v_samp_factor pixel rows from each

- * row group (times any additional scale factor that the upsampler is

- * applying).

- *

- * The coefficient controller will deliver data to us one iMCU row at a time;

- * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or

- * exactly min_DCT_scaled_size row groups.  (This amount of data corresponds

- * to one row of MCUs when the image is fully interleaved.)  Note that the

- * number of sample rows varies across components, but the number of row

- * groups does not.  Some garbage sample rows may be included in the last iMCU

- * row at the bottom of the image.

- *

- * Depending on the vertical scaling algorithm used, the upsampler may need

- * access to the sample row(s) above and below its current input row group.

- * The upsampler is required to set need_context_rows TRUE at global selection

- * time if so.  When need_context_rows is FALSE, this controller can simply

- * obtain one iMCU row at a time from the coefficient controller and dole it

- * out as row groups to the postprocessor.

- *

- * When need_context_rows is TRUE, this controller guarantees that the buffer

- * passed to postprocessing contains at least one row group's worth of samples

- * above and below the row group(s) being processed.  Note that the context

- * rows "above" the first passed row group appear at negative row offsets in

- * the passed buffer.  At the top and bottom of the image, the required

- * context rows are manufactured by duplicating the first or last real sample

- * row; this avoids having special cases in the upsampling inner loops.

- *

- * The amount of context is fixed at one row group just because that's a

- * convenient number for this controller to work with.  The existing

- * upsamplers really only need one sample row of context.  An upsampler

- * supporting arbitrary output rescaling might wish for more than one row

- * group of context when shrinking the image; tough, we don't handle that.

- * (This is justified by the assumption that downsizing will be handled mostly

- * by adjusting the DCT_scaled_size values, so that the actual scale factor at

- * the upsample step needn't be much less than one.)

- *

- * To provide the desired context, we have to retain the last two row groups

- * of one iMCU row while reading in the next iMCU row.  (The last row group

- * can't be processed until we have another row group for its below-context,

- * and so we have to save the next-to-last group too for its above-context.)

- * We could do this most simply by copying data around in our buffer, but

- * that'd be very slow.  We can avoid copying any data by creating a rather

- * strange pointer structure.  Here's how it works.  We allocate a workspace

- * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number

- * of row groups per iMCU row).  We create two sets of redundant pointers to

- * the workspace.  Labeling the physical row groups 0 to M+1, the synthesized

- * pointer lists look like this:

- *                   M+1                          M-1

- * master pointer --> 0         master pointer --> 0

- *                    1                            1

- *                   ...                          ...

- *                   M-3                          M-3

- *                   M-2                           M

- *                   M-1                          M+1

- *                    M                           M-2

- *                   M+1                          M-1

- *                    0                            0

- * We read alternate iMCU rows using each master pointer; thus the last two

- * row groups of the previous iMCU row remain un-overwritten in the workspace.

- * The pointer lists are set up so that the required context rows appear to

- * be adjacent to the proper places when we pass the pointer lists to the

- * upsampler.

- *

- * The above pictures describe the normal state of the pointer lists.

- * At top and bottom of the image, we diddle the pointer lists to duplicate

- * the first or last sample row as necessary (this is cheaper than copying

- * sample rows around).

- *

- * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1.  In that

- * situation each iMCU row provides only one row group so the buffering logic

- * must be different (eg, we must read two iMCU rows before we can emit the

- * first row group).  For now, we simply do not support providing context

- * rows when min_DCT_scaled_size is 1.  That combination seems unlikely to

- * be worth providing --- if someone wants a 1/8th-size preview, they probably

- * want it quick and dirty, so a context-free upsampler is sufficient.

- */

-

-

-/* Private buffer controller object */

-

-typedef struct {

-  struct jpeg_d_main_controller pub; /* public fields */

-

-  /* Pointer to allocated workspace (M or M+2 row groups). */

-  JSAMPARRAY buffer[MAX_COMPONENTS];

-

-  boolean buffer_full;		/* Have we gotten an iMCU row from decoder? */

-  JDIMENSION rowgroup_ctr;	/* counts row groups output to postprocessor */

-

-  /* Remaining fields are only used in the context case. */

-

-  /* These are the master pointers to the funny-order pointer lists. */

-  JSAMPIMAGE xbuffer[2];	/* pointers to weird pointer lists */

-

-  int whichptr;			/* indicates which pointer set is now in use */

-  int context_state;		/* process_data state machine status */

-  JDIMENSION rowgroups_avail;	/* row groups available to postprocessor */

-  JDIMENSION iMCU_row_ctr;	/* counts iMCU rows to detect image top/bot */

-} my_main_controller;

-

-typedef my_main_controller * my_main_ptr;

-

-/* context_state values: */

-#define CTX_PREPARE_FOR_IMCU	0	/* need to prepare for MCU row */

-#define CTX_PROCESS_IMCU	1	/* feeding iMCU to postprocessor */

-#define CTX_POSTPONED_ROW	2	/* feeding postponed row group */

-

-

-/* Forward declarations */

-METHODDEF void process_data_simple_main

-	JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,

-	     JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));

-METHODDEF void process_data_context_main

-	JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,

-	     JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));

-#ifdef QUANT_2PASS_SUPPORTED

-METHODDEF void process_data_crank_post

-	JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,

-	     JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));

-#endif

-

-

-LOCAL void

-alloc_funny_pointers (j_decompress_ptr cinfo)

-/* Allocate space for the funny pointer lists.

- * This is done only once, not once per pass.

- */

-{

-  my_main_ptr main = (my_main_ptr) cinfo->main;

-  int ci, rgroup;

-  int M = cinfo->min_DCT_scaled_size;

-  jpeg_component_info *compptr;

-  JSAMPARRAY xbuf;

-

-  /* Get top-level space for component array pointers.

-   * We alloc both arrays with one call to save a few cycles.

-   */

-  main->xbuffer[0] = (JSAMPIMAGE)

-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,

-				cinfo->num_components * 2 * SIZEOF(JSAMPARRAY));

-  main->xbuffer[1] = main->xbuffer[0] + cinfo->num_components;

-

-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;

-       ci++, compptr++) {

-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /

-      cinfo->min_DCT_scaled_size; /* height of a row group of component */

-    /* Get space for pointer lists --- M+4 row groups in each list.

-     * We alloc both pointer lists with one call to save a few cycles.

-     */

-    xbuf = (JSAMPARRAY)

-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,

-				  2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW));

-    xbuf += rgroup;		/* want one row group at negative offsets */

-    main->xbuffer[0][ci] = xbuf;

-    xbuf += rgroup * (M + 4);

-    main->xbuffer[1][ci] = xbuf;

-  }

-}

-

-

-LOCAL void

-make_funny_pointers (j_decompress_ptr cinfo)

-/* Create the funny pointer lists discussed in the comments above.

- * The actual workspace is already allocated (in main->buffer),

- * and the space for the pointer lists is allocated too.

- * This routine just fills in the curiously ordered lists.

- * This will be repeated at the beginning of each pass.

- */

-{

-  my_main_ptr main = (my_main_ptr) cinfo->main;

-  int ci, i, rgroup;

-  int M = cinfo->min_DCT_scaled_size;

-  jpeg_component_info *compptr;

-  JSAMPARRAY buf, xbuf0, xbuf1;

-

-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;

-       ci++, compptr++) {

-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /

-      cinfo->min_DCT_scaled_size; /* height of a row group of component */

-    xbuf0 = main->xbuffer[0][ci];

-    xbuf1 = main->xbuffer[1][ci];

-    /* First copy the workspace pointers as-is */

-    buf = main->buffer[ci];

-    for (i = 0; i < rgroup * (M + 2); i++) {

-      xbuf0[i] = xbuf1[i] = buf[i];

-    }

-    /* In the second list, put the last four row groups in swapped order */

-    for (i = 0; i < rgroup * 2; i++) {

-      xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i];

-      xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i];

-    }

-    /* The wraparound pointers at top and bottom will be filled later

-     * (see set_wraparound_pointers, below).  Initially we want the "above"

-     * pointers to duplicate the first actual data line.  This only needs

-     * to happen in xbuffer[0].

-     */

-    for (i = 0; i < rgroup; i++) {

-      xbuf0[i - rgroup] = xbuf0[0];

-    }

-  }

-}

-

-

-LOCAL void

-set_wraparound_pointers (j_decompress_ptr cinfo)

-/* Set up the "wraparound" pointers at top and bottom of the pointer lists.

- * This changes the pointer list state from top-of-image to the normal state.

- */

-{

-  my_main_ptr main = (my_main_ptr) cinfo->main;

-  int ci, i, rgroup;

-  int M = cinfo->min_DCT_scaled_size;

-  jpeg_component_info *compptr;

-  JSAMPARRAY xbuf0, xbuf1;

-

-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;

-       ci++, compptr++) {

-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /

-      cinfo->min_DCT_scaled_size; /* height of a row group of component */

-    xbuf0 = main->xbuffer[0][ci];

-    xbuf1 = main->xbuffer[1][ci];

-    for (i = 0; i < rgroup; i++) {

-      xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i];

-      xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i];

-      xbuf0[rgroup*(M+2) + i] = xbuf0[i];

-      xbuf1[rgroup*(M+2) + i] = xbuf1[i];

-    }

-  }

-}

-

-

-LOCAL void

-set_bottom_pointers (j_decompress_ptr cinfo)

-/* Change the pointer lists to duplicate the last sample row at the bottom

- * of the image.  whichptr indicates which xbuffer holds the final iMCU row.

- * Also sets rowgroups_avail to indicate number of nondummy row groups in row.

- */

-{

-  my_main_ptr main = (my_main_ptr) cinfo->main;

-  int ci, i, rgroup, iMCUheight, rows_left;

-  jpeg_component_info *compptr;

-  JSAMPARRAY xbuf;

-

-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;

-       ci++, compptr++) {

-    /* Count sample rows in one iMCU row and in one row group */

-    iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size;

-    rgroup = iMCUheight / cinfo->min_DCT_scaled_size;

-    /* Count nondummy sample rows remaining for this component */

-    rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight);

-    if (rows_left == 0) rows_left = iMCUheight;

-    /* Count nondummy row groups.  Should get same answer for each component,

-     * so we need only do it once.

-     */

-    if (ci == 0) {

-      main->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1);

-    }

-    /* Duplicate the last real sample row rgroup*2 times; this pads out the

-     * last partial rowgroup and ensures at least one full rowgroup of context.

-     */

-    xbuf = main->xbuffer[main->whichptr][ci];

-    for (i = 0; i < rgroup * 2; i++) {

-      xbuf[rows_left + i] = xbuf[rows_left-1];

-    }

-  }

-}

-

-

-/*

- * Initialize for a processing pass.

- */

-

-METHODDEF void

-start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)

-{

-  my_main_ptr main = (my_main_ptr) cinfo->main;

-

-  switch (pass_mode) {

-  case JBUF_PASS_THRU:

-    if (cinfo->upsample->need_context_rows) {

-      main->pub.process_data = process_data_context_main;

-      make_funny_pointers(cinfo); /* Create the xbuffer[] lists */

-      main->whichptr = 0;	/* Read first iMCU row into xbuffer[0] */

-      main->context_state = CTX_PREPARE_FOR_IMCU;

-      main->iMCU_row_ctr = 0;

-    } else {

-      /* Simple case with no context needed */

-      main->pub.process_data = process_data_simple_main;

-    }

-    main->buffer_full = FALSE;	/* Mark buffer empty */

-    main->rowgroup_ctr = 0;

-    break;

-#ifdef QUANT_2PASS_SUPPORTED

-  case JBUF_CRANK_DEST:

-    /* For last pass of 2-pass quantization, just crank the postprocessor */

-    main->pub.process_data = process_data_crank_post;

-    break;

-#endif

-  default:

-    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);

-    break;

-  }

-}

-

-

-/*

- * Process some data.

- * This handles the simple case where no context is required.

- */

-

-METHODDEF void

-process_data_simple_main (j_decompress_ptr cinfo,

-			  JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,

-			  JDIMENSION out_rows_avail)

-{

-  my_main_ptr main = (my_main_ptr) cinfo->main;

-  JDIMENSION rowgroups_avail;

-

-  /* Read input data if we haven't filled the main buffer yet */

-  if (! main->buffer_full) {

-    if (! (*cinfo->coef->decompress_data) (cinfo, main->buffer))

-      return;			/* suspension forced, can do nothing more */

-    main->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */

-  }

-

-  /* There are always min_DCT_scaled_size row groups in an iMCU row. */

-  rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size;

-  /* Note: at the bottom of the image, we may pass extra garbage row groups

-   * to the postprocessor.  The postprocessor has to check for bottom

-   * of image anyway (at row resolution), so no point in us doing it too.

-   */

-

-  /* Feed the postprocessor */

-  (*cinfo->post->post_process_data) (cinfo, main->buffer,

-				     &main->rowgroup_ctr, rowgroups_avail,

-				     output_buf, out_row_ctr, out_rows_avail);

-

-  /* Has postprocessor consumed all the data yet? If so, mark buffer empty */

-  if (main->rowgroup_ctr >= rowgroups_avail) {

-    main->buffer_full = FALSE;

-    main->rowgroup_ctr = 0;

-  }

-}

-

-

-/*

- * Process some data.

- * This handles the case where context rows must be provided.

- */

-

-METHODDEF void

-process_data_context_main (j_decompress_ptr cinfo,

-			   JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,

-			   JDIMENSION out_rows_avail)

-{

-  my_main_ptr main = (my_main_ptr) cinfo->main;

-

-  /* Read input data if we haven't filled the main buffer yet */

-  if (! main->buffer_full) {

-    if (! (*cinfo->coef->decompress_data) (cinfo,

-					   main->xbuffer[main->whichptr]))

-      return;			/* suspension forced, can do nothing more */

-    main->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */

-    main->iMCU_row_ctr++;	/* count rows received */

-  }

-

-  /* Postprocessor typically will not swallow all the input data it is handed

-   * in one call (due to filling the output buffer first).  Must be prepared

-   * to exit and restart.  This switch lets us keep track of how far we got.

-   * Note that each case falls through to the next on successful completion.

-   */

-  switch (main->context_state) {

-  case CTX_POSTPONED_ROW:

-    /* Call postprocessor using previously set pointers for postponed row */

-    (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr],

-			&main->rowgroup_ctr, main->rowgroups_avail,

-			output_buf, out_row_ctr, out_rows_avail);

-    if (main->rowgroup_ctr < main->rowgroups_avail)

-      return;			/* Need to suspend */

-    main->context_state = CTX_PREPARE_FOR_IMCU;

-    if (*out_row_ctr >= out_rows_avail)

-      return;			/* Postprocessor exactly filled output buf */

-    /*FALLTHROUGH*/

-  case CTX_PREPARE_FOR_IMCU:

-    /* Prepare to process first M-1 row groups of this iMCU row */

-    main->rowgroup_ctr = 0;

-    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1);

-    /* Check for bottom of image: if so, tweak pointers to "duplicate"

-     * the last sample row, and adjust rowgroups_avail to ignore padding rows.

-     */

-    if (main->iMCU_row_ctr == cinfo->total_iMCU_rows)

-      set_bottom_pointers(cinfo);

-    main->context_state = CTX_PROCESS_IMCU;

-    /*FALLTHROUGH*/

-  case CTX_PROCESS_IMCU:

-    /* Call postprocessor using previously set pointers */

-    (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr],

-			&main->rowgroup_ctr, main->rowgroups_avail,

-			output_buf, out_row_ctr, out_rows_avail);

-    if (main->rowgroup_ctr < main->rowgroups_avail)

-      return;			/* Need to suspend */

-    /* After the first iMCU, change wraparound pointers to normal state */

-    if (main->iMCU_row_ctr == 1)

-      set_wraparound_pointers(cinfo);

-    /* Prepare to load new iMCU row using other xbuffer list */

-    main->whichptr ^= 1;	/* 0=>1 or 1=>0 */

-    main->buffer_full = FALSE;

-    /* Still need to process last row group of this iMCU row, */

-    /* which is saved at index M+1 of the other xbuffer */

-    main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1);

-    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2);

-    main->context_state = CTX_POSTPONED_ROW;

-  }

-}

-

-

-/*

- * Process some data.

- * Final pass of two-pass quantization: just call the postprocessor.

- * Source data will be the postprocessor controller's internal buffer.

- */

-

-#ifdef QUANT_2PASS_SUPPORTED

-

-METHODDEF void

-process_data_crank_post (j_decompress_ptr cinfo,

-			 JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,

-			 JDIMENSION out_rows_avail)

-{

-  (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL,

-				     (JDIMENSION *) NULL, (JDIMENSION) 0,

-				     output_buf, out_row_ctr, out_rows_avail);

-}

-

-#endif /* QUANT_2PASS_SUPPORTED */

-

-

-/*

- * Initialize main buffer controller.

- */

-

-GLOBAL void

-jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer)

-{

-  my_main_ptr main;

-  int ci, rgroup, ngroups;

-  jpeg_component_info *compptr;

-

-  main = (my_main_ptr)

-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,

-				SIZEOF(my_main_controller));

-  cinfo->main = (struct jpeg_d_main_controller *) main;

-  main->pub.start_pass = start_pass_main;

-

-  if (need_full_buffer)		/* shouldn't happen */

-    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);

-

-  /* Allocate the workspace.

-   * ngroups is the number of row groups we need.

-   */

-  if (cinfo->upsample->need_context_rows) {

-    if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */

-      ERREXIT(cinfo, JERR_NOTIMPL);

-    alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */

-    ngroups = cinfo->min_DCT_scaled_size + 2;

-  } else {

-    ngroups = cinfo->min_DCT_scaled_size;

-  }

-

-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;

-       ci++, compptr++) {

-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /

-      cinfo->min_DCT_scaled_size; /* height of a row group of component */

-    main->buffer[ci] = (*cinfo->mem->alloc_sarray)

-			((j_common_ptr) cinfo, JPOOL_IMAGE,

-			 compptr->width_in_blocks * compptr->DCT_scaled_size,

-			 (JDIMENSION) (rgroup * ngroups));

-  }

-}

+/*
+ * jdmainct.c
+ *
+ * Copyright (C) 1994-1995, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the main buffer controller for decompression.
+ * The main buffer lies between the JPEG decompressor proper and the
+ * post-processor; it holds downsampled data in the JPEG colorspace.
+ *
+ * Note that this code is bypassed in raw-data mode, since the application
+ * supplies the equivalent of the main buffer in that case.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * In the current system design, the main buffer need never be a full-image
+ * buffer; any full-height buffers will be found inside the coefficient or
+ * postprocessing controllers.  Nonetheless, the main controller is not
+ * trivial.  Its responsibility is to provide context rows for upsampling/
+ * rescaling, and doing this in an efficient fashion is a bit tricky.
+ *
+ * Postprocessor input data is counted in "row groups".  A row group
+ * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
+ * sample rows of each component.  (We require DCT_scaled_size values to be
+ * chosen such that these numbers are integers.  In practice DCT_scaled_size
+ * values will likely be powers of two, so we actually have the stronger
+ * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.)
+ * Upsampling will typically produce max_v_samp_factor pixel rows from each
+ * row group (times any additional scale factor that the upsampler is
+ * applying).
+ *
+ * The coefficient controller will deliver data to us one iMCU row at a time;
+ * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or
+ * exactly min_DCT_scaled_size row groups.  (This amount of data corresponds
+ * to one row of MCUs when the image is fully interleaved.)  Note that the
+ * number of sample rows varies across components, but the number of row
+ * groups does not.  Some garbage sample rows may be included in the last iMCU
+ * row at the bottom of the image.
+ *
+ * Depending on the vertical scaling algorithm used, the upsampler may need
+ * access to the sample row(s) above and below its current input row group.
+ * The upsampler is required to set need_context_rows TRUE at global selection
+ * time if so.  When need_context_rows is FALSE, this controller can simply
+ * obtain one iMCU row at a time from the coefficient controller and dole it
+ * out as row groups to the postprocessor.
+ *
+ * When need_context_rows is TRUE, this controller guarantees that the buffer
+ * passed to postprocessing contains at least one row group's worth of samples
+ * above and below the row group(s) being processed.  Note that the context
+ * rows "above" the first passed row group appear at negative row offsets in
+ * the passed buffer.  At the top and bottom of the image, the required
+ * context rows are manufactured by duplicating the first or last real sample
+ * row; this avoids having special cases in the upsampling inner loops.
+ *
+ * The amount of context is fixed at one row group just because that's a
+ * convenient number for this controller to work with.  The existing
+ * upsamplers really only need one sample row of context.  An upsampler
+ * supporting arbitrary output rescaling might wish for more than one row
+ * group of context when shrinking the image; tough, we don't handle that.
+ * (This is justified by the assumption that downsizing will be handled mostly
+ * by adjusting the DCT_scaled_size values, so that the actual scale factor at
+ * the upsample step needn't be much less than one.)
+ *
+ * To provide the desired context, we have to retain the last two row groups
+ * of one iMCU row while reading in the next iMCU row.  (The last row group
+ * can't be processed until we have another row group for its below-context,
+ * and so we have to save the next-to-last group too for its above-context.)
+ * We could do this most simply by copying data around in our buffer, but
+ * that'd be very slow.  We can avoid copying any data by creating a rather
+ * strange pointer structure.  Here's how it works.  We allocate a workspace
+ * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number
+ * of row groups per iMCU row).  We create two sets of redundant pointers to
+ * the workspace.  Labeling the physical row groups 0 to M+1, the synthesized
+ * pointer lists look like this:
+ *                   M+1                          M-1
+ * master pointer --> 0         master pointer --> 0
+ *                    1                            1
+ *                   ...                          ...
+ *                   M-3                          M-3
+ *                   M-2                           M
+ *                   M-1                          M+1
+ *                    M                           M-2
+ *                   M+1                          M-1
+ *                    0                            0
+ * We read alternate iMCU rows using each master pointer; thus the last two
+ * row groups of the previous iMCU row remain un-overwritten in the workspace.
+ * The pointer lists are set up so that the required context rows appear to
+ * be adjacent to the proper places when we pass the pointer lists to the
+ * upsampler.
+ *
+ * The above pictures describe the normal state of the pointer lists.
+ * At top and bottom of the image, we diddle the pointer lists to duplicate
+ * the first or last sample row as necessary (this is cheaper than copying
+ * sample rows around).
+ *
+ * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1.  In that
+ * situation each iMCU row provides only one row group so the buffering logic
+ * must be different (eg, we must read two iMCU rows before we can emit the
+ * first row group).  For now, we simply do not support providing context
+ * rows when min_DCT_scaled_size is 1.  That combination seems unlikely to
+ * be worth providing --- if someone wants a 1/8th-size preview, they probably
+ * want it quick and dirty, so a context-free upsampler is sufficient.
+ */
+
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_d_main_controller pub; /* public fields */
+
+  /* Pointer to allocated workspace (M or M+2 row groups). */
+  JSAMPARRAY buffer[MAX_COMPONENTS];
+
+  boolean buffer_full;		/* Have we gotten an iMCU row from decoder? */
+  JDIMENSION rowgroup_ctr;	/* counts row groups output to postprocessor */
+
+  /* Remaining fields are only used in the context case. */
+
+  /* These are the master pointers to the funny-order pointer lists. */
+  JSAMPIMAGE xbuffer[2];	/* pointers to weird pointer lists */
+
+  int whichptr;			/* indicates which pointer set is now in use */
+  int context_state;		/* process_data state machine status */
+  JDIMENSION rowgroups_avail;	/* row groups available to postprocessor */
+  JDIMENSION iMCU_row_ctr;	/* counts iMCU rows to detect image top/bot */
+} my_main_controller;
+
+typedef my_main_controller * my_main_ptr;
+
+/* context_state values: */
+#define CTX_PREPARE_FOR_IMCU	0	/* need to prepare for MCU row */
+#define CTX_PROCESS_IMCU	1	/* feeding iMCU to postprocessor */
+#define CTX_POSTPONED_ROW	2	/* feeding postponed row group */
+
+
+/* Forward declarations */
+METHODDEF void process_data_simple_main
+	JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
+	     JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
+METHODDEF void process_data_context_main
+	JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
+	     JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
+#ifdef QUANT_2PASS_SUPPORTED
+METHODDEF void process_data_crank_post
+	JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
+	     JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
+#endif
+
+
+LOCAL void
+alloc_funny_pointers (j_decompress_ptr cinfo)
+/* Allocate space for the funny pointer lists.
+ * This is done only once, not once per pass.
+ */
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  int ci, rgroup;
+  int M = cinfo->min_DCT_scaled_size;
+  jpeg_component_info *compptr;
+  JSAMPARRAY xbuf;
+
+  /* Get top-level space for component array pointers.
+   * We alloc both arrays with one call to save a few cycles.
+   */
+  main->xbuffer[0] = (JSAMPIMAGE)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				cinfo->num_components * 2 * SIZEOF(JSAMPARRAY));
+  main->xbuffer[1] = main->xbuffer[0] + cinfo->num_components;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
+      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    /* Get space for pointer lists --- M+4 row groups in each list.
+     * We alloc both pointer lists with one call to save a few cycles.
+     */
+    xbuf = (JSAMPARRAY)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW));
+    xbuf += rgroup;		/* want one row group at negative offsets */
+    main->xbuffer[0][ci] = xbuf;
+    xbuf += rgroup * (M + 4);
+    main->xbuffer[1][ci] = xbuf;
+  }
+}
+
+
+LOCAL void
+make_funny_pointers (j_decompress_ptr cinfo)
+/* Create the funny pointer lists discussed in the comments above.
+ * The actual workspace is already allocated (in main->buffer),
+ * and the space for the pointer lists is allocated too.
+ * This routine just fills in the curiously ordered lists.
+ * This will be repeated at the beginning of each pass.
+ */
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  int ci, i, rgroup;
+  int M = cinfo->min_DCT_scaled_size;
+  jpeg_component_info *compptr;
+  JSAMPARRAY buf, xbuf0, xbuf1;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
+      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    xbuf0 = main->xbuffer[0][ci];
+    xbuf1 = main->xbuffer[1][ci];
+    /* First copy the workspace pointers as-is */
+    buf = main->buffer[ci];
+    for (i = 0; i < rgroup * (M + 2); i++) {
+      xbuf0[i] = xbuf1[i] = buf[i];
+    }
+    /* In the second list, put the last four row groups in swapped order */
+    for (i = 0; i < rgroup * 2; i++) {
+      xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i];
+      xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i];
+    }
+    /* The wraparound pointers at top and bottom will be filled later
+     * (see set_wraparound_pointers, below).  Initially we want the "above"
+     * pointers to duplicate the first actual data line.  This only needs
+     * to happen in xbuffer[0].
+     */
+    for (i = 0; i < rgroup; i++) {
+      xbuf0[i - rgroup] = xbuf0[0];
+    }
+  }
+}
+
+
+LOCAL void
+set_wraparound_pointers (j_decompress_ptr cinfo)
+/* Set up the "wraparound" pointers at top and bottom of the pointer lists.
+ * This changes the pointer list state from top-of-image to the normal state.
+ */
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  int ci, i, rgroup;
+  int M = cinfo->min_DCT_scaled_size;
+  jpeg_component_info *compptr;
+  JSAMPARRAY xbuf0, xbuf1;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
+      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    xbuf0 = main->xbuffer[0][ci];
+    xbuf1 = main->xbuffer[1][ci];
+    for (i = 0; i < rgroup; i++) {
+      xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i];
+      xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i];
+      xbuf0[rgroup*(M+2) + i] = xbuf0[i];
+      xbuf1[rgroup*(M+2) + i] = xbuf1[i];
+    }
+  }
+}
+
+
+LOCAL void
+set_bottom_pointers (j_decompress_ptr cinfo)
+/* Change the pointer lists to duplicate the last sample row at the bottom
+ * of the image.  whichptr indicates which xbuffer holds the final iMCU row.
+ * Also sets rowgroups_avail to indicate number of nondummy row groups in row.
+ */
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  int ci, i, rgroup, iMCUheight, rows_left;
+  jpeg_component_info *compptr;
+  JSAMPARRAY xbuf;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Count sample rows in one iMCU row and in one row group */
+    iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size;
+    rgroup = iMCUheight / cinfo->min_DCT_scaled_size;
+    /* Count nondummy sample rows remaining for this component */
+    rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight);
+    if (rows_left == 0) rows_left = iMCUheight;
+    /* Count nondummy row groups.  Should get same answer for each component,
+     * so we need only do it once.
+     */
+    if (ci == 0) {
+      main->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1);
+    }
+    /* Duplicate the last real sample row rgroup*2 times; this pads out the
+     * last partial rowgroup and ensures at least one full rowgroup of context.
+     */
+    xbuf = main->xbuffer[main->whichptr][ci];
+    for (i = 0; i < rgroup * 2; i++) {
+      xbuf[rows_left + i] = xbuf[rows_left-1];
+    }
+  }
+}
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF void
+start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+
+  switch (pass_mode) {
+  case JBUF_PASS_THRU:
+    if (cinfo->upsample->need_context_rows) {
+      main->pub.process_data = process_data_context_main;
+      make_funny_pointers(cinfo); /* Create the xbuffer[] lists */
+      main->whichptr = 0;	/* Read first iMCU row into xbuffer[0] */
+      main->context_state = CTX_PREPARE_FOR_IMCU;
+      main->iMCU_row_ctr = 0;
+    } else {
+      /* Simple case with no context needed */
+      main->pub.process_data = process_data_simple_main;
+    }
+    main->buffer_full = FALSE;	/* Mark buffer empty */
+    main->rowgroup_ctr = 0;
+    break;
+#ifdef QUANT_2PASS_SUPPORTED
+  case JBUF_CRANK_DEST:
+    /* For last pass of 2-pass quantization, just crank the postprocessor */
+    main->pub.process_data = process_data_crank_post;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    break;
+  }
+}
+
+
+/*
+ * Process some data.
+ * This handles the simple case where no context is required.
+ */
+
+METHODDEF void
+process_data_simple_main (j_decompress_ptr cinfo,
+			  JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+			  JDIMENSION out_rows_avail)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  JDIMENSION rowgroups_avail;
+
+  /* Read input data if we haven't filled the main buffer yet */
+  if (! main->buffer_full) {
+    if (! (*cinfo->coef->decompress_data) (cinfo, main->buffer))
+      return;			/* suspension forced, can do nothing more */
+    main->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
+  }
+
+  /* There are always min_DCT_scaled_size row groups in an iMCU row. */
+  rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size;
+  /* Note: at the bottom of the image, we may pass extra garbage row groups
+   * to the postprocessor.  The postprocessor has to check for bottom
+   * of image anyway (at row resolution), so no point in us doing it too.
+   */
+
+  /* Feed the postprocessor */
+  (*cinfo->post->post_process_data) (cinfo, main->buffer,
+				     &main->rowgroup_ctr, rowgroups_avail,
+				     output_buf, out_row_ctr, out_rows_avail);
+
+  /* Has postprocessor consumed all the data yet? If so, mark buffer empty */
+  if (main->rowgroup_ctr >= rowgroups_avail) {
+    main->buffer_full = FALSE;
+    main->rowgroup_ctr = 0;
+  }
+}
+
+
+/*
+ * Process some data.
+ * This handles the case where context rows must be provided.
+ */
+
+METHODDEF void
+process_data_context_main (j_decompress_ptr cinfo,
+			   JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+			   JDIMENSION out_rows_avail)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+
+  /* Read input data if we haven't filled the main buffer yet */
+  if (! main->buffer_full) {
+    if (! (*cinfo->coef->decompress_data) (cinfo,
+					   main->xbuffer[main->whichptr]))
+      return;			/* suspension forced, can do nothing more */
+    main->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
+    main->iMCU_row_ctr++;	/* count rows received */
+  }
+
+  /* Postprocessor typically will not swallow all the input data it is handed
+   * in one call (due to filling the output buffer first).  Must be prepared
+   * to exit and restart.  This switch lets us keep track of how far we got.
+   * Note that each case falls through to the next on successful completion.
+   */
+  switch (main->context_state) {
+  case CTX_POSTPONED_ROW:
+    /* Call postprocessor using previously set pointers for postponed row */
+    (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr],
+			&main->rowgroup_ctr, main->rowgroups_avail,
+			output_buf, out_row_ctr, out_rows_avail);
+    if (main->rowgroup_ctr < main->rowgroups_avail)
+      return;			/* Need to suspend */
+    main->context_state = CTX_PREPARE_FOR_IMCU;
+    if (*out_row_ctr >= out_rows_avail)
+      return;			/* Postprocessor exactly filled output buf */
+    /*FALLTHROUGH*/
+  case CTX_PREPARE_FOR_IMCU:
+    /* Prepare to process first M-1 row groups of this iMCU row */
+    main->rowgroup_ctr = 0;
+    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1);
+    /* Check for bottom of image: if so, tweak pointers to "duplicate"
+     * the last sample row, and adjust rowgroups_avail to ignore padding rows.
+     */
+    if (main->iMCU_row_ctr == cinfo->total_iMCU_rows)
+      set_bottom_pointers(cinfo);
+    main->context_state = CTX_PROCESS_IMCU;
+    /*FALLTHROUGH*/
+  case CTX_PROCESS_IMCU:
+    /* Call postprocessor using previously set pointers */
+    (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr],
+			&main->rowgroup_ctr, main->rowgroups_avail,
+			output_buf, out_row_ctr, out_rows_avail);
+    if (main->rowgroup_ctr < main->rowgroups_avail)
+      return;			/* Need to suspend */
+    /* After the first iMCU, change wraparound pointers to normal state */
+    if (main->iMCU_row_ctr == 1)
+      set_wraparound_pointers(cinfo);
+    /* Prepare to load new iMCU row using other xbuffer list */
+    main->whichptr ^= 1;	/* 0=>1 or 1=>0 */
+    main->buffer_full = FALSE;
+    /* Still need to process last row group of this iMCU row, */
+    /* which is saved at index M+1 of the other xbuffer */
+    main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1);
+    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2);
+    main->context_state = CTX_POSTPONED_ROW;
+  }
+}
+
+
+/*
+ * Process some data.
+ * Final pass of two-pass quantization: just call the postprocessor.
+ * Source data will be the postprocessor controller's internal buffer.
+ */
+
+#ifdef QUANT_2PASS_SUPPORTED
+
+METHODDEF void
+process_data_crank_post (j_decompress_ptr cinfo,
+			 JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+			 JDIMENSION out_rows_avail)
+{
+  (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL,
+				     (JDIMENSION *) NULL, (JDIMENSION) 0,
+				     output_buf, out_row_ctr, out_rows_avail);
+}
+
+#endif /* QUANT_2PASS_SUPPORTED */
+
+
+/*
+ * Initialize main buffer controller.
+ */
+
+GLOBAL void
+jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
+{
+  my_main_ptr main;
+  int ci, rgroup, ngroups;
+  jpeg_component_info *compptr;
+
+  main = (my_main_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_main_controller));
+  cinfo->main = (struct jpeg_d_main_controller *) main;
+  main->pub.start_pass = start_pass_main;
+
+  if (need_full_buffer)		/* shouldn't happen */
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+
+  /* Allocate the workspace.
+   * ngroups is the number of row groups we need.
+   */
+  if (cinfo->upsample->need_context_rows) {
+    if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */
+      ERREXIT(cinfo, JERR_NOTIMPL);
+    alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */
+    ngroups = cinfo->min_DCT_scaled_size + 2;
+  } else {
+    ngroups = cinfo->min_DCT_scaled_size;
+  }
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
+      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    main->buffer[ci] = (*cinfo->mem->alloc_sarray)
+			((j_common_ptr) cinfo, JPOOL_IMAGE,
+			 compptr->width_in_blocks * compptr->DCT_scaled_size,
+			 (JDIMENSION) (rgroup * ngroups));
+  }
+}