* PNG support from Joerg Dietrich <dietrich_joerg@t-online.de>

* Cleanup of tabulation in R_LoadImage


git-svn-id: svn://svn.icculus.org/quake3/trunk@1132 edf5b092-35ff-0310-97b2-ce42778d08ea

2 files changed, 801 insertions, 0 deletions

diff --git a/code/qcommon/puff.c b/code/qcommon/puff.c
new file mode 100644
index 0000000..721854d
--- /dev/null
+++ b/code/qcommon/puff.c
@@ -0,0 +1,758 @@
+/*
+ *  This is a modified version of Mark Adlers work,
+ *  see below for the original copyright.
+ *  2006 - Joerg Dietrich <dietrich_joerg@gmx.de>
+ */
+
+/*
+ * puff.c
+ * Copyright (C) 2002-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in puff.h
+ * version 1.8, 9 Jan 2004
+ *
+ * puff.c is a simple inflate written to be an unambiguous way to specify the
+ * deflate format.  It is not written for speed but rather simplicity.  As a
+ * side benefit, this code might actually be useful when small code is more
+ * important than speed, such as bootstrap applications.  For typical deflate
+ * data, zlib's inflate() is about four times as fast as puff().  zlib's
+ * inflate compiles to around 20K on my machine, whereas puff.c compiles to
+ * around 4K on my machine (a PowerPC using GNU cc).  If the faster decode()
+ * function here is used, then puff() is only twice as slow as zlib's
+ * inflate().
+ *
+ * All dynamically allocated memory comes from the stack.  The stack required
+ * is less than 2K bytes.  This code is compatible with 16-bit int's and
+ * assumes that long's are at least 32 bits.  puff.c uses the short data type,
+ * assumed to be 16 bits, for arrays in order to to conserve memory.  The code
+ * works whether integers are stored big endian or little endian.
+ *
+ * In the comments below are "Format notes" that describe the inflate process
+ * and document some of the less obvious aspects of the format.  This source
+ * code is meant to supplement RFC 1951, which formally describes the deflate
+ * format:
+ *
+ *    http://www.zlib.org/rfc-deflate.html
+ */
+
+/*
+ * Change history:
+ *
+ * 1.0  10 Feb 2002     - First version
+ * 1.1  17 Feb 2002     - Clarifications of some comments and notes
+ *                      - Update puff() dest and source pointers on negative
+ *                        errors to facilitate debugging deflators
+ *                      - Remove longest from struct huffman -- not needed
+ *                      - Simplify offs[] index in construct()
+ *                      - Add input size and checking, using longjmp() to
+ *                        maintain easy readability
+ *                      - Use short data type for large arrays
+ *                      - Use pointers instead of long to specify source and
+ *                        destination sizes to avoid arbitrary 4 GB limits
+ * 1.2  17 Mar 2002     - Add faster version of decode(), doubles speed (!),
+ *                        but leave simple version for readabilty
+ *                      - Make sure invalid distances detected if pointers
+ *                        are 16 bits
+ *                      - Fix fixed codes table error
+ *                      - Provide a scanning mode for determining size of
+ *                        uncompressed data
+ * 1.3  20 Mar 2002     - Go back to lengths for puff() parameters [Jean-loup]
+ *                      - Add a puff.h file for the interface
+ *                      - Add braces in puff() for else do [Jean-loup]
+ *                      - Use indexes instead of pointers for readability
+ * 1.4  31 Mar 2002     - Simplify construct() code set check
+ *                      - Fix some comments
+ *                      - Add FIXLCODES #define
+ * 1.5   6 Apr 2002     - Minor comment fixes
+ * 1.6   7 Aug 2002     - Minor format changes
+ * 1.7   3 Mar 2003     - Added test code for distribution
+ *                      - Added zlib-like license
+ * 1.8   9 Jan 2004     - Added some comments on no distance codes case
+ */
+
+#include <setjmp.h>             /* for setjmp(), longjmp(), and jmp_buf */
+#include "puff.h"		/* prototype for puff() */
+
+#define local static            /* for local function definitions */
+
+/*
+ * Maximums for allocations and loops.  It is not useful to change these --
+ * they are fixed by the deflate format.
+ */
+#define MAXBITS 15              /* maximum bits in a code */
+#define MAXLCODES 286           /* maximum number of literal/length codes */
+#define MAXDCODES 30            /* maximum number of distance codes */
+#define MAXCODES (MAXLCODES+MAXDCODES)  /* maximum codes lengths to read */
+#define FIXLCODES 288           /* number of fixed literal/length codes */
+
+/* input and output state */
+struct state {
+    /* output state */
+    uint8_t *out;         /* output buffer */
+    uint32_t outlen;       /* available space at out */
+    uint32_t outcnt;       /* bytes written to out so far */
+
+    /* input state */
+    uint8_t *in;          /* input buffer */
+    uint32_t inlen;        /* available input at in */
+    uint32_t incnt;        /* bytes read so far */
+    int32_t bitbuf;                 /* bit buffer */
+    int32_t bitcnt;                 /* number of bits in bit buffer */
+
+    /* input limit error return state for bits() and decode() */
+    jmp_buf env;
+};
+
+/*
+ * Return need bits from the input stream.  This always leaves less than
+ * eight bits in the buffer.  bits() works properly for need == 0.
+ *
+ * Format notes:
+ *
+ * - Bits are stored in bytes from the least significant bit to the most
+ *   significant bit.  Therefore bits are dropped from the bottom of the bit
+ *   buffer, using shift right, and new bytes are appended to the top of the
+ *   bit buffer, using shift left.
+ */
+local int32_t bits(struct state *s, int32_t need)
+{
+    int32_t val;           /* bit accumulator (can use up to 20 bits) */
+
+    /* load at least need bits into val */
+    val = s->bitbuf;
+    while (s->bitcnt < need) {
+        if (s->incnt == s->inlen) longjmp(s->env, 1);   /* out of input */
+        val |= (int32_t)(s->in[s->incnt++]) << s->bitcnt;  /* load eight bits */
+        s->bitcnt += 8;
+    }
+
+    /* drop need bits and update buffer, always zero to seven bits left */
+    s->bitbuf = (int32_t)(val >> need);
+    s->bitcnt -= need;
+
+    /* return need bits, zeroing the bits above that */
+    return (int32_t)(val & ((1L << need) - 1));
+}
+
+/*
+ * Process a stored block.
+ *
+ * Format notes:
+ *
+ * - After the two-bit stored block type (00), the stored block length and
+ *   stored bytes are byte-aligned for fast copying.  Therefore any leftover
+ *   bits in the byte that has the last bit of the type, as many as seven, are
+ *   discarded.  The value of the discarded bits are not defined and should not
+ *   be checked against any expectation.
+ *
+ * - The second inverted copy of the stored block length does not have to be
+ *   checked, but it's probably a good idea to do so anyway.
+ *
+ * - A stored block can have zero length.  This is sometimes used to byte-align
+ *   subsets of the compressed data for random access or partial recovery.
+ */
+local int32_t stored(struct state *s)
+{
+    uint32_t len;       /* length of stored block */
+
+    /* discard leftover bits from current byte (assumes s->bitcnt < 8) */
+    s->bitbuf = 0;
+    s->bitcnt = 0;
+
+    /* get length and check against its one's complement */
+    if (s->incnt + 4 > s->inlen) return 2;      /* not enough input */
+    len = s->in[s->incnt++];
+    len |= s->in[s->incnt++] << 8;
+    if (s->in[s->incnt++] != (~len & 0xff) ||
+        s->in[s->incnt++] != ((~len >> 8) & 0xff))
+        return -2;                              /* didn't match complement! */
+
+    /* copy len bytes from in to out */
+    if (s->incnt + len > s->inlen) return 2;    /* not enough input */
+    if (s->out != NULL) {
+        if (s->outcnt + len > s->outlen)
+            return 1;                           /* not enough output space */
+        while (len--)
+            s->out[s->outcnt++] = s->in[s->incnt++];
+    }
+    else {                                      /* just scanning */
+        s->outcnt += len;
+        s->incnt += len;
+    }
+
+    /* done with a valid stored block */
+    return 0;
+}
+
+/*
+ * Huffman code decoding tables.  count[1..MAXBITS] is the number of symbols of
+ * each length, which for a canonical code are stepped through in order.
+ * symbol[] are the symbol values in canonical order, where the number of
+ * entries is the sum of the counts in count[].  The decoding process can be
+ * seen in the function decode() below.
+ */
+struct huffman {
+    int16_t *count;       /* number of symbols of each length */
+    int16_t *symbol;      /* canonically ordered symbols */
+};
+
+/*
+ * Decode a code from the stream s using huffman table h.  Return the symbol or
+ * a negative value if there is an error.  If all of the lengths are zero, i.e.
+ * an empty code, or if the code is incomplete and an invalid code is received,
+ * then -9 is returned after reading MAXBITS bits.
+ *
+ * Format notes:
+ *
+ * - The codes as stored in the compressed data are bit-reversed relative to
+ *   a simple integer ordering of codes of the same lengths.  Hence below the
+ *   bits are pulled from the compressed data one at a time and used to
+ *   build the code value reversed from what is in the stream in order to
+ *   permit simple integer comparisons for decoding.  A table-based decoding
+ *   scheme (as used in zlib) does not need to do this reversal.
+ *
+ * - The first code for the shortest length is all zeros.  Subsequent codes of
+ *   the same length are simply integer increments of the previous code.  When
+ *   moving up a length, a zero bit is appended to the code.  For a complete
+ *   code, the last code of the longest length will be all ones.
+ *
+ * - Incomplete codes are handled by this decoder, since they are permitted
+ *   in the deflate format.  See the format notes for fixed() and dynamic().
+ */
+local int32_t decode(struct state *s, struct huffman *h)
+{
+    int32_t len;            /* current number of bits in code */
+    int32_t code;           /* len bits being decoded */
+    int32_t first;          /* first code of length len */
+    int32_t count;          /* number of codes of length len */
+    int32_t index;          /* index of first code of length len in symbol table */
+    int32_t bitbuf;         /* bits from stream */
+    int32_t left;           /* bits left in next or left to process */
+    int16_t *next;        /* next number of codes */
+
+    bitbuf = s->bitbuf;
+    left = s->bitcnt;
+    code = first = index = 0;
+    len = 1;
+    next = h->count + 1;
+    while (1) {
+        while (left--) {
+            code |= bitbuf & 1;
+            bitbuf >>= 1;
+            count = *next++;
+            if (code < first + count) { /* if length len, return symbol */
+                s->bitbuf = bitbuf;
+                s->bitcnt = (s->bitcnt - len) & 7;
+                return h->symbol[index + (code - first)];
+            }
+            index += count;             /* else update for next length */
+            first += count;
+            first <<= 1;
+            code <<= 1;
+            len++;
+        }
+        left = (MAXBITS+1) - len;
+        if (left == 0) break;
+        if (s->incnt == s->inlen) longjmp(s->env, 1);   /* out of input */
+        bitbuf = s->in[s->incnt++];
+        if (left > 8) left = 8;
+    }
+    return -9;                          /* ran out of codes */
+}
+
+/*
+ * Given the list of code lengths length[0..n-1] representing a canonical
+ * Huffman code for n symbols, construct the tables required to decode those
+ * codes.  Those tables are the number of codes of each length, and the symbols
+ * sorted by length, retaining their original order within each length.  The
+ * return value is zero for a complete code set, negative for an over-
+ * subscribed code set, and positive for an incomplete code set.  The tables
+ * can be used if the return value is zero or positive, but they cannot be used
+ * if the return value is negative.  If the return value is zero, it is not
+ * possible for decode() using that table to return an error--any stream of
+ * enough bits will resolve to a symbol.  If the return value is positive, then
+ * it is possible for decode() using that table to return an error for received
+ * codes past the end of the incomplete lengths.
+ *
+ * Not used by decode(), but used for error checking, h->count[0] is the number
+ * of the n symbols not in the code.  So n - h->count[0] is the number of
+ * codes.  This is useful for checking for incomplete codes that have more than
+ * one symbol, which is an error in a dynamic block.
+ *
+ * Assumption: for all i in 0..n-1, 0 <= length[i] <= MAXBITS
+ * This is assured by the construction of the length arrays in dynamic() and
+ * fixed() and is not verified by construct().
+ *
+ * Format notes:
+ *
+ * - Permitted and expected examples of incomplete codes are one of the fixed
+ *   codes and any code with a single symbol which in deflate is coded as one
+ *   bit instead of zero bits.  See the format notes for fixed() and dynamic().
+ *
+ * - Within a given code length, the symbols are kept in ascending order for
+ *   the code bits definition.
+ */
+local int32_t construct(struct huffman *h, int16_t *length, int32_t n)
+{
+    int32_t symbol;         /* current symbol when stepping through length[] */
+    int32_t len;            /* current length when stepping through h->count[] */
+    int32_t left;           /* number of possible codes left of current length */
+    int16_t offs[MAXBITS+1];      /* offsets in symbol table for each length */
+
+    /* count number of codes of each length */
+    for (len = 0; len <= MAXBITS; len++)
+        h->count[len] = 0;
+    for (symbol = 0; symbol < n; symbol++)
+        (h->count[length[symbol]])++;   /* assumes lengths are within bounds */
+    if (h->count[0] == n)               /* no codes! */
+        return 0;                       /* complete, but decode() will fail */
+
+    /* check for an over-subscribed or incomplete set of lengths */
+    left = 1;                           /* one possible code of zero length */
+    for (len = 1; len <= MAXBITS; len++) {
+        left <<= 1;                     /* one more bit, double codes left */
+        left -= h->count[len];          /* deduct count from possible codes */
+        if (left < 0) return left;      /* over-subscribed--return negative */
+    }                                   /* left > 0 means incomplete */
+
+    /* generate offsets into symbol table for each length for sorting */
+    offs[1] = 0;
+    for (len = 1; len < MAXBITS; len++)
+        offs[len + 1] = offs[len] + h->count[len];
+
+    /*
+     * put symbols in table sorted by length, by symbol order within each
+     * length
+     */
+    for (symbol = 0; symbol < n; symbol++)
+        if (length[symbol] != 0)
+            h->symbol[offs[length[symbol]]++] = symbol;
+
+    /* return zero for complete set, positive for incomplete set */
+    return left;
+}
+
+/*
+ * Decode literal/length and distance codes until an end-of-block code.
+ *
+ * Format notes:
+ *
+ * - Compressed data that is after the block type if fixed or after the code
+ *   description if dynamic is a combination of literals and length/distance
+ *   pairs terminated by and end-of-block code.  Literals are simply Huffman
+ *   coded bytes.  A length/distance pair is a coded length followed by a
+ *   coded distance to represent a string that occurs earlier in the
+ *   uncompressed data that occurs again at the current location.
+ *
+ * - Literals, lengths, and the end-of-block code are combined into a single
+ *   code of up to 286 symbols.  They are 256 literals (0..255), 29 length
+ *   symbols (257..285), and the end-of-block symbol (256).
+ *
+ * - There are 256 possible lengths (3..258), and so 29 symbols are not enough
+ *   to represent all of those.  Lengths 3..10 and 258 are in fact represented
+ *   by just a length symbol.  Lengths 11..257 are represented as a symbol and
+ *   some number of extra bits that are added as an integer to the base length
+ *   of the length symbol.  The number of extra bits is determined by the base
+ *   length symbol.  These are in the static arrays below, lens[] for the base
+ *   lengths and lext[] for the corresponding number of extra bits.
+ *
+ * - The reason that 258 gets its own symbol is that the longest length is used
+ *   often in highly redundant files.  Note that 258 can also be coded as the
+ *   base value 227 plus the maximum extra value of 31.  While a good deflate
+ *   should never do this, it is not an error, and should be decoded properly.
+ *
+ * - If a length is decoded, including its extra bits if any, then it is
+ *   followed a distance code.  There are up to 30 distance symbols.  Again
+ *   there are many more possible distances (1..32768), so extra bits are added
+ *   to a base value represented by the symbol.  The distances 1..4 get their
+ *   own symbol, but the rest require extra bits.  The base distances and
+ *   corresponding number of extra bits are below in the static arrays dist[]
+ *   and dext[].
+ *
+ * - Literal bytes are simply written to the output.  A length/distance pair is
+ *   an instruction to copy previously uncompressed bytes to the output.  The
+ *   copy is from distance bytes back in the output stream, copying for length
+ *   bytes.
+ *
+ * - Distances pointing before the beginning of the output data are not
+ *   permitted.
+ *
+ * - Overlapped copies, where the length is greater than the distance, are
+ *   allowed and common.  For example, a distance of one and a length of 258
+ *   simply copies the last byte 258 times.  A distance of four and a length of
+ *   twelve copies the last four bytes three times.  A simple forward copy
+ *   ignoring whether the length is greater than the distance or not implements
+ *   this correctly.  You should not use memcpy() since its behavior is not
+ *   defined for overlapped arrays.  You should not use memmove() or bcopy()
+ *   since though their behavior -is- defined for overlapping arrays, it is
+ *   defined to do the wrong thing in this case.
+ */
+local int32_t codes(struct state *s,
+                struct huffman *lencode,
+                struct huffman *distcode)
+{
+    int32_t symbol;         /* decoded symbol */
+    int32_t len;            /* length for copy */
+    uint32_t dist;          /* distance for copy */
+    static const int16_t lens[29] = { /* Size base for length codes 257..285 */
+        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258};
+    static const int16_t lext[29] = { /* Extra bits for length codes 257..285 */
+        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
+        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0};
+    static const int16_t dists[30] = { /* Offset base for distance codes 0..29 */
+        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+        8193, 12289, 16385, 24577};
+    static const int16_t dext[30] = { /* Extra bits for distance codes 0..29 */
+        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
+        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
+        12, 12, 13, 13};
+
+    /* decode literals and length/distance pairs */
+    do {
+        symbol = decode(s, lencode);
+        if (symbol < 0) return symbol;  /* invalid symbol */
+        if (symbol < 256) {             /* literal: symbol is the byte */
+            /* write out the literal */
+            if (s->out != NULL) {
+                if (s->outcnt == s->outlen) return 1;
+                s->out[s->outcnt] = symbol;
+            }
+            s->outcnt++;
+        }
+        else if (symbol > 256) {        /* length */
+            /* get and compute length */
+            symbol -= 257;
+            if (symbol >= 29) return -9;        /* invalid fixed code */
+            len = lens[symbol] + bits(s, lext[symbol]);
+
+            /* get and check distance */
+            symbol = decode(s, distcode);
+            if (symbol < 0) return symbol;      /* invalid symbol */
+            dist = dists[symbol] + bits(s, dext[symbol]);
+            if (dist > s->outcnt)
+                return -10;     /* distance too far back */
+
+            /* copy length bytes from distance bytes back */
+            if (s->out != NULL) {
+                if (s->outcnt + len > s->outlen) return 1;
+                while (len--) {
+                    s->out[s->outcnt] = s->out[s->outcnt - dist];
+                    s->outcnt++;
+                }
+            }
+            else
+                s->outcnt += len;
+        }
+    } while (symbol != 256);            /* end of block symbol */
+
+    /* done with a valid fixed or dynamic block */
+    return 0;
+}
+
+/*
+ * Process a fixed codes block.
+ *
+ * Format notes:
+ *
+ * - This block type can be useful for compressing small amounts of data for
+ *   which the size of the code descriptions in a dynamic block exceeds the
+ *   benefit of custom codes for that block.  For fixed codes, no bits are
+ *   spent on code descriptions.  Instead the code lengths for literal/length
+ *   codes and distance codes are fixed.  The specific lengths for each symbol
+ *   can be seen in the "for" loops below.
+ *
+ * - The literal/length code is complete, but has two symbols that are invalid
+ *   and should result in an error if received.  This cannot be implemented
+ *   simply as an incomplete code since those two symbols are in the "middle"
+ *   of the code.  They are eight bits long and the longest literal/length\
+ *   code is nine bits.  Therefore the code must be constructed with those
+ *   symbols, and the invalid symbols must be detected after decoding.
+ *
+ * - The fixed distance codes also have two invalid symbols that should result
+ *   in an error if received.  Since all of the distance codes are the same
+ *   length, this can be implemented as an incomplete code.  Then the invalid
+ *   codes are detected while decoding.
+ */
+local int32_t fixed(struct state *s)
+{
+    static int32_t virgin = 1;
+    static int16_t lencnt[MAXBITS+1], lensym[FIXLCODES];
+    static int16_t distcnt[MAXBITS+1], distsym[MAXDCODES];
+    static struct huffman lencode = {lencnt, lensym};
+    static struct huffman distcode = {distcnt, distsym};
+
+    /* build fixed huffman tables if first call (may not be thread safe) */
+    if (virgin) {
+        int32_t symbol;
+        int16_t lengths[FIXLCODES];
+
+        /* literal/length table */
+        for (symbol = 0; symbol < 144; symbol++)
+            lengths[symbol] = 8;
+        for (; symbol < 256; symbol++)
+            lengths[symbol] = 9;
+        for (; symbol < 280; symbol++)
+            lengths[symbol] = 7;
+        for (; symbol < FIXLCODES; symbol++)
+            lengths[symbol] = 8;
+        construct(&lencode, lengths, FIXLCODES);
+
+        /* distance table */
+        for (symbol = 0; symbol < MAXDCODES; symbol++)
+            lengths[symbol] = 5;
+        construct(&distcode, lengths, MAXDCODES);
+
+        /* do this just once */
+        virgin = 0;
+    }
+
+    /* decode data until end-of-block code */
+    return codes(s, &lencode, &distcode);
+}
+
+/*
+ * Process a dynamic codes block.
+ *
+ * Format notes:
+ *
+ * - A dynamic block starts with a description of the literal/length and
+ *   distance codes for that block.  New dynamic blocks allow the compressor to
+ *   rapidly adapt to changing data with new codes optimized for that data.
+ *
+ * - The codes used by the deflate format are "canonical", which means that
+ *   the actual bits of the codes are generated in an unambiguous way simply
+ *   from the number of bits in each code.  Therefore the code descriptions
+ *   are simply a list of code lengths for each symbol.
+ *
+ * - The code lengths are stored in order for the symbols, so lengths are
+ *   provided for each of the literal/length symbols, and for each of the
+ *   distance symbols.
+ *
+ * - If a symbol is not used in the block, this is represented by a zero as
+ *   as the code length.  This does not mean a zero-length code, but rather
+ *   that no code should be created for this symbol.  There is no way in the
+ *   deflate format to represent a zero-length code.
+ *
+ * - The maximum number of bits in a code is 15, so the possible lengths for
+ *   any code are 1..15.
+ *
+ * - The fact that a length of zero is not permitted for a code has an
+ *   interesting consequence.  Normally if only one symbol is used for a given
+ *   code, then in fact that code could be represented with zero bits.  However
+ *   in deflate, that code has to be at least one bit.  So for example, if
+ *   only a single distance base symbol appears in a block, then it will be
+ *   represented by a single code of length one, in particular one 0 bit.  This
+ *   is an incomplete code, since if a 1 bit is received, it has no meaning,
+ *   and should result in an error.  So incomplete distance codes of one symbol
+ *   should be permitted, and the receipt of invalid codes should be handled.
+ *
+ * - It is also possible to have a single literal/length code, but that code
+ *   must be the end-of-block code, since every dynamic block has one.  This
+ *   is not the most efficient way to create an empty block (an empty fixed
+ *   block is fewer bits), but it is allowed by the format.  So incomplete
+ *   literal/length codes of one symbol should also be permitted.
+ *
+ * - If there are only literal codes and no lengths, then there are no distance
+ *   codes.  This is represented by one distance code with zero bits.
+ *
+ * - The list of up to 286 length/literal lengths and up to 30 distance lengths
+ *   are themselves compressed using Huffman codes and run-length encoding.  In
+ *   the list of code lengths, a 0 symbol means no code, a 1..15 symbol means
+ *   that length, and the symbols 16, 17, and 18 are run-length instructions.
+ *   Each of 16, 17, and 18 are follwed by extra bits to define the length of
+ *   the run.  16 copies the last length 3 to 6 times.  17 represents 3 to 10
+ *   zero lengths, and 18 represents 11 to 138 zero lengths.  Unused symbols
+ *   are common, hence the special coding for zero lengths.
+ *
+ * - The symbols for 0..18 are Huffman coded, and so that code must be
+ *   described first.  This is simply a sequence of up to 19 three-bit values
+ *   representing no code (0) or the code length for that symbol (1..7).
+ *
+ * - A dynamic block starts with three fixed-size counts from which is computed
+ *   the number of literal/length code lengths, the number of distance code
+ *   lengths, and the number of code length code lengths (ok, you come up with
+ *   a better name!) in the code descriptions.  For the literal/length and
+ *   distance codes, lengths after those provided are considered zero, i.e. no
+ *   code.  The code length code lengths are received in a permuted order (see
+ *   the order[] array below) to make a short code length code length list more
+ *   likely.  As it turns out, very short and very long codes are less likely
+ *   to be seen in a dynamic code description, hence what may appear initially
+ *   to be a peculiar ordering.
+ *
+ * - Given the number of literal/length code lengths (nlen) and distance code
+ *   lengths (ndist), then they are treated as one long list of nlen + ndist
+ *   code lengths.  Therefore run-length coding can and often does cross the
+ *   boundary between the two sets of lengths.
+ *
+ * - So to summarize, the code description at the start of a dynamic block is
+ *   three counts for the number of code lengths for the literal/length codes,
+ *   the distance codes, and the code length codes.  This is followed by the
+ *   code length code lengths, three bits each.  This is used to construct the
+ *   code length code which is used to read the remainder of the lengths.  Then
+ *   the literal/length code lengths and distance lengths are read as a single
+ *   set of lengths using the code length codes.  Codes are constructed from
+ *   the resulting two sets of lengths, and then finally you can start
+ *   decoding actual compressed data in the block.
+ *
+ * - For reference, a "typical" size for the code description in a dynamic
+ *   block is around 80 bytes.
+ */
+local int32_t dynamic(struct state *s)
+{
+    int32_t nlen, ndist, ncode;             /* number of lengths in descriptor */
+    int32_t index;                          /* index of lengths[] */
+    int32_t err;                            /* construct() return value */
+    int16_t lengths[MAXCODES];            /* descriptor code lengths */
+    int16_t lencnt[MAXBITS+1], lensym[MAXLCODES];         /* lencode memory */
+    int16_t distcnt[MAXBITS+1], distsym[MAXDCODES];       /* distcode memory */
+    struct huffman lencode = {lencnt, lensym};          /* length code */
+    struct huffman distcode = {distcnt, distsym};       /* distance code */
+    static const int16_t order[19] =      /* permutation of code length codes */
+        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+    /* get number of lengths in each table, check lengths */
+    nlen = bits(s, 5) + 257;
+    ndist = bits(s, 5) + 1;
+    ncode = bits(s, 4) + 4;
+    if (nlen > MAXLCODES || ndist > MAXDCODES)
+        return -3;                      /* bad counts */
+
+    /* read code length code lengths (really), missing lengths are zero */
+    for (index = 0; index < ncode; index++)
+        lengths[order[index]] = bits(s, 3);
+    for (; index < 19; index++)
+        lengths[order[index]] = 0;
+
+    /* build huffman table for code lengths codes (use lencode temporarily) */
+    err = construct(&lencode, lengths, 19);
+    if (err != 0) return -4;            /* require complete code set here */
+
+    /* read length/literal and distance code length tables */
+    index = 0;
+    while (index < nlen + ndist) {
+        int32_t symbol;             /* decoded value */
+        int32_t len;                /* last length to repeat */
+
+        symbol = decode(s, &lencode);
+        if (symbol < 16)                /* length in 0..15 */
+            lengths[index++] = symbol;
+        else {                          /* repeat instruction */
+            len = 0;                    /* assume repeating zeros */
+            if (symbol == 16) {         /* repeat last length 3..6 times */
+                if (index == 0) return -5;      /* no last length! */
+                len = lengths[index - 1];       /* last length */
+                symbol = 3 + bits(s, 2);
+            }
+            else if (symbol == 17)      /* repeat zero 3..10 times */
+                symbol = 3 + bits(s, 3);
+            else                        /* == 18, repeat zero 11..138 times */
+                symbol = 11 + bits(s, 7);
+            if (index + symbol > nlen + ndist)
+                return -6;              /* too many lengths! */
+            while (symbol--)            /* repeat last or zero symbol times */
+                lengths[index++] = len;
+        }
+    }
+
+    /* build huffman table for literal/length codes */
+    err = construct(&lencode, lengths, nlen);
+    if (err < 0 || (err > 0 && nlen - lencode.count[0] != 1))
+        return -7;      /* only allow incomplete codes if just one code */
+
+    /* build huffman table for distance codes */
+    err = construct(&distcode, lengths + nlen, ndist);
+    if (err < 0 || (err > 0 && ndist - distcode.count[0] != 1))
+        return -8;      /* only allow incomplete codes if just one code */
+
+    /* decode data until end-of-block code */
+    return codes(s, &lencode, &distcode);
+}
+
+/*
+ * Inflate source to dest.  On return, destlen and sourcelen are updated to the
+ * size of the uncompressed data and the size of the deflate data respectively.
+ * On success, the return value of puff() is zero.  If there is an error in the
+ * source data, i.e. it is not in the deflate format, then a negative value is
+ * returned.  If there is not enough input available or there is not enough
+ * output space, then a positive error is returned.  In that case, destlen and
+ * sourcelen are not updated to facilitate retrying from the beginning with the
+ * provision of more input data or more output space.  In the case of invalid
+ * inflate data (a negative error), the dest and source pointers are updated to
+ * facilitate the debugging of deflators.
+ *
+ * puff() also has a mode to determine the size of the uncompressed output with
+ * no output written.  For this dest must be (uint8_t *)0.  In this case,
+ * the input value of *destlen is ignored, and on return *destlen is set to the
+ * size of the uncompressed output.
+ *
+ * The return codes are:
+ *
+ *   2:  available inflate data did not terminate
+ *   1:  output space exhausted before completing inflate
+ *   0:  successful inflate
+ *  -1:  invalid block type (type == 3)
+ *  -2:  stored block length did not match one's complement
+ *  -3:  dynamic block code description: too many length or distance codes
+ *  -4:  dynamic block code description: code lengths codes incomplete
+ *  -5:  dynamic block code description: repeat lengths with no first length
+ *  -6:  dynamic block code description: repeat more than specified lengths
+ *  -7:  dynamic block code description: invalid literal/length code lengths
+ *  -8:  dynamic block code description: invalid distance code lengths
+ *  -9:  invalid literal/length or distance code in fixed or dynamic block
+ * -10:  distance is too far back in fixed or dynamic block
+ *
+ * Format notes:
+ *
+ * - Three bits are read for each block to determine the kind of block and
+ *   whether or not it is the last block.  Then the block is decoded and the
+ *   process repeated if it was not the last block.
+ *
+ * - The leftover bits in the last byte of the deflate data after the last
+ *   block (if it was a fixed or dynamic block) are undefined and have no
+ *   expected values to check.
+ */
+int32_t puff(uint8_t  *dest,           /* pointer to destination pointer */
+             uint32_t *destlen,        /* amount of output space */
+             uint8_t  *source,         /* pointer to source data pointer */
+             uint32_t *sourcelen)      /* amount of input available */
+{
+    struct state s;             /* input/output state */
+    int32_t last, type;             /* block information */
+    int32_t err;                    /* return value */
+
+    /* initialize output state */
+    s.out = dest;
+    s.outlen = *destlen;                /* ignored if dest is NULL */
+    s.outcnt = 0;
+
+    /* initialize input state */
+    s.in = source;
+    s.inlen = *sourcelen;
+    s.incnt = 0;
+    s.bitbuf = 0;
+    s.bitcnt = 0;
+
+    /* return if bits() or decode() tries to read past available input */
+    if (setjmp(s.env) != 0)             /* if came back here via longjmp() */
+        err = 2;                        /* then skip do-loop, return error */
+    else {
+        /* process blocks until last block or error */
+        do {
+            last = bits(&s, 1);         /* one if last block */
+            type = bits(&s, 2);         /* block type 0..3 */
+            err = type == 0 ? stored(&s) :
+                  (type == 1 ? fixed(&s) :
+                   (type == 2 ? dynamic(&s) :
+                    -1));               /* type == 3, invalid */
+            if (err != 0) break;        /* return with error */
+        } while (!last);
+    }
+
+    /* update the lengths and return */
+    if (err <= 0) {
+        *destlen = s.outcnt;
+        *sourcelen = s.incnt;
+    }
+    return err;
+}
diff --git a/code/qcommon/puff.h b/code/qcommon/puff.h
new file mode 100644
index 0000000..14070f6
--- /dev/null
+++ b/code/qcommon/puff.h
@@ -0,0 +1,43 @@
+/*
+ *  This is a modified version of Mark Adlers work,
+ *  see below for the original copyright.
+ *  2006 - Joerg Dietrich <dietrich_joerg@gmx.de>
+ */
+
+/* puff.h
+  Copyright (C) 2002, 2003 Mark Adler, all rights reserved
+  version 1.7, 3 Mar 2002
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the author be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Mark Adler    madler@alumni.caltech.edu
+ */
+
+#ifndef __PUFF_H
+#define __PUFF_H
+
+#include "q_shared.h"			/* for definitions of the <stdint.h> types */
+
+/*
+ * See puff.c for purpose and usage.
+ */
+int32_t puff(uint8_t  *dest,		/* pointer to destination pointer */
+             uint32_t *destlen,		/* amount of output space */
+             uint8_t  *source,		/* pointer to source data pointer */
+             uint32_t *sourcelen);	/* amount of input available */
+
+#endif // __PUFF_H