1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
|
/******************************************************************************
* The MIT License
*
* Copyright (c) 2010 Perry Hung.
* Copyright (c) 2011 LeafLabs, LLC.
*
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*****************************************************************************/
/**
* @file libmaple/stm32f1/rcc.c
* @brief STM32F1 RCC.
*/
#include <libmaple/rcc.h>
#include <libmaple/libmaple.h>
#include <libmaple/bitband.h>
#include "rcc_private.h"
#define APB1 RCC_APB1
#define APB2 RCC_APB2
#define AHB RCC_AHB
/* Device descriptor table, maps rcc_clk_id onto bus and enable/reset
* register bit numbers. */
const struct rcc_dev_info rcc_dev_table[] = {
[RCC_GPIOA] = { .clk_domain = APB2, .line_num = 2 },
[RCC_GPIOB] = { .clk_domain = APB2, .line_num = 3 },
[RCC_GPIOC] = { .clk_domain = APB2, .line_num = 4 },
[RCC_GPIOD] = { .clk_domain = APB2, .line_num = 5 },
[RCC_AFIO] = { .clk_domain = APB2, .line_num = 0 },
[RCC_ADC1] = { .clk_domain = APB2, .line_num = 9 },
[RCC_ADC2] = { .clk_domain = APB2, .line_num = 10 },
[RCC_ADC3] = { .clk_domain = APB2, .line_num = 15 },
[RCC_USART1] = { .clk_domain = APB2, .line_num = 14 },
[RCC_USART2] = { .clk_domain = APB1, .line_num = 17 },
[RCC_USART3] = { .clk_domain = APB1, .line_num = 18 },
[RCC_TIMER1] = { .clk_domain = APB2, .line_num = 11 },
[RCC_TIMER2] = { .clk_domain = APB1, .line_num = 0 },
[RCC_TIMER3] = { .clk_domain = APB1, .line_num = 1 },
[RCC_TIMER4] = { .clk_domain = APB1, .line_num = 2 },
[RCC_SPI1] = { .clk_domain = APB2, .line_num = 12 },
[RCC_SPI2] = { .clk_domain = APB1, .line_num = 14 },
[RCC_DMA1] = { .clk_domain = AHB, .line_num = 0 },
[RCC_PWR] = { .clk_domain = APB1, .line_num = 28},
[RCC_BKP] = { .clk_domain = APB1, .line_num = 27},
[RCC_I2C1] = { .clk_domain = APB1, .line_num = 21 },
[RCC_I2C2] = { .clk_domain = APB1, .line_num = 22 },
[RCC_CRC] = { .clk_domain = AHB, .line_num = 6},
[RCC_FLITF] = { .clk_domain = AHB, .line_num = 4},
[RCC_SRAM] = { .clk_domain = AHB, .line_num = 2},
[RCC_USB] = { .clk_domain = APB1, .line_num = 23},
#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY)
[RCC_GPIOE] = { .clk_domain = APB2, .line_num = 6 },
[RCC_GPIOF] = { .clk_domain = APB2, .line_num = 7 },
[RCC_GPIOG] = { .clk_domain = APB2, .line_num = 8 },
[RCC_UART4] = { .clk_domain = APB1, .line_num = 19 },
[RCC_UART5] = { .clk_domain = APB1, .line_num = 20 },
[RCC_TIMER5] = { .clk_domain = APB1, .line_num = 3 },
[RCC_TIMER6] = { .clk_domain = APB1, .line_num = 4 },
[RCC_TIMER7] = { .clk_domain = APB1, .line_num = 5 },
[RCC_TIMER8] = { .clk_domain = APB2, .line_num = 13 },
[RCC_FSMC] = { .clk_domain = AHB, .line_num = 8 },
[RCC_DAC] = { .clk_domain = APB1, .line_num = 29 },
[RCC_DMA2] = { .clk_domain = AHB, .line_num = 1 },
[RCC_SDIO] = { .clk_domain = AHB, .line_num = 10 },
[RCC_SPI3] = { .clk_domain = APB1, .line_num = 15 },
#endif
#ifdef STM32_XL_DENSITY
[RCC_TIMER9] = { .clk_domain = APB2, .line_num = 19 },
[RCC_TIMER10] = { .clk_domain = APB2, .line_num = 20 },
[RCC_TIMER11] = { .clk_domain = APB2, .line_num = 21 },
[RCC_TIMER12] = { .clk_domain = APB1, .line_num = 6 },
[RCC_TIMER13] = { .clk_domain = APB1, .line_num = 7 },
[RCC_TIMER14] = { .clk_domain = APB1, .line_num = 8 },
#endif
};
/**
* @brief Deprecated.
*
* Initialize the clock control system. Initializes the system
* clock source to use the PLL driven by an external oscillator.
*
* This function is limited and nonportable. Instead of using it,
* follow this (portable) procedure:
*
* 1. Switch to HSI by calling rcc_switch_sysclk(RCC_CLKSRC_HSI).
* 2. Turn off HSE by calling rcc_turn_off_clk(RCC_CLK_HSE).
* 3. Turn off the PLL by calling rcc_turn_off_clk(RCC_CLK_HSE).
* 4. Reconfigure the PLL using rcc_configure_pll().
* 5. Turn on RCC_CLK_HSE using rcc_turn_on_clk() and wait for it to
* become ready by busy-waiting on rcc_is_clk_ready().
* 6. Turn on RCC_CLK_PLL using the same methods.
* 7. Switch to the PLL with rcc_switch_sysclk(RCC_CLKSRC_PLL).
*
* @param sysclk_src system clock source, must be PLL
* @param pll_src pll clock source, must be HSE
* @param pll_mul pll multiplier
*/
void rcc_clk_init(rcc_sysclk_src sysclk_src,
rcc_pllsrc pll_src,
rcc_pll_multiplier pll_mul) {
/* Assume that we're going to clock the chip off the PLL, fed by
* the HSE */
ASSERT(sysclk_src == RCC_CLKSRC_PLL &&
pll_src == RCC_PLLSRC_HSE);
RCC_BASE->CFGR = pll_src | pll_mul;
/* Turn on, and wait for, HSE. */
rcc_turn_on_clk(RCC_CLK_HSE);
while (!rcc_is_clk_ready(RCC_CLK_HSE))
;
/* Do the same for the main PLL. */
rcc_turn_on_clk(RCC_CLK_PLL);
while(!rcc_is_clk_ready(RCC_CLK_PLL))
;
/* Finally, switch over to the PLL. */
rcc_switch_sysclk(RCC_CLKSRC_PLL);
}
/**
* @brief Configure the main PLL.
*
* You may only call this function while the PLL is disabled.
*
* @param pll_cfg Desired PLL configuration. The data field must point
* to a valid struct stm32f1_rcc_pll_data.
*/
void rcc_configure_pll(rcc_pll_cfg *pll_cfg) {
stm32f1_rcc_pll_data *data = pll_cfg->data;
rcc_pll_multiplier pll_mul = data->pll_mul;
uint32 cfgr;
/* Check that the PLL is disabled. */
ASSERT_FAULT(!rcc_is_clk_on(RCC_CLK_PLL));
cfgr = RCC_BASE->CFGR;
cfgr &= ~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL);
cfgr |= pll_cfg->pllsrc | pll_mul;
RCC_BASE->CFGR = cfgr;
}
/**
* @brief Turn on the clock line on a peripheral
* @param id Clock ID of the peripheral to turn on.
*/
void rcc_clk_enable(rcc_clk_id id) {
static __io uint32* enable_regs[] = {
[APB1] = &RCC_BASE->APB1ENR,
[APB2] = &RCC_BASE->APB2ENR,
[AHB] = &RCC_BASE->AHBENR,
};
rcc_do_clk_enable(enable_regs, id);
}
/**
* @brief Reset a peripheral.
*
* Caution: not all rcc_clk_id values refer to a peripheral which can
* be reset.
*
* @param id Clock ID of the peripheral to reset.
*/
void rcc_reset_dev(rcc_clk_id id) {
static __io uint32* reset_regs[] = {
[APB1] = &RCC_BASE->APB1RSTR,
[APB2] = &RCC_BASE->APB2RSTR,
};
rcc_do_reset_dev(reset_regs, id);
}
/**
* @brief Set the divider on a peripheral prescaler
* @param prescaler prescaler to set
* @param divider prescaler divider
*/
void rcc_set_prescaler(rcc_prescaler prescaler, uint32 divider) {
static const uint32 masks[] = {
[RCC_PRESCALER_AHB] = RCC_CFGR_HPRE,
[RCC_PRESCALER_APB1] = RCC_CFGR_PPRE1,
[RCC_PRESCALER_APB2] = RCC_CFGR_PPRE2,
[RCC_PRESCALER_USB] = RCC_CFGR_USBPRE,
[RCC_PRESCALER_ADC] = RCC_CFGR_ADCPRE,
};
rcc_do_set_prescaler(masks, prescaler, divider);
}
|
