diff options
Diffstat (limited to 'libmaple/include/libmaple/spi.h')
| -rw-r--r-- | libmaple/include/libmaple/spi.h | 456 |
1 files changed, 456 insertions, 0 deletions
diff --git a/libmaple/include/libmaple/spi.h b/libmaple/include/libmaple/spi.h new file mode 100644 index 0000000..6f509c2 --- /dev/null +++ b/libmaple/include/libmaple/spi.h @@ -0,0 +1,456 @@ +/****************************************************************************** + * The MIT License + * + * Copyright (c) 2010 Perry Hung. + * + * Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, + * modify, merge, publish, distribute, sublicense, and/or sell copies + * of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + *****************************************************************************/ + +/** + * @file spi.h + * @author Marti Bolivar <mbolivar@leaflabs.com> + * @brief Serial Peripheral Interface (SPI) and Integrated + * Interchip Sound (I2S) peripheral support. + * + * I2S support is currently limited to register maps and bit definitions. + */ + +#ifndef _LIBMAPLE_SPI_H_ +#define _LIBMAPLE_SPI_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include <libmaple/libmaple_types.h> +#include <libmaple/rcc.h> +#include <libmaple/nvic.h> +#include <libmaple/gpio.h> +#include <libmaple/util.h> + +/* + * Register maps + */ + +/** SPI register map type. */ +typedef struct spi_reg_map { + __io uint32 CR1; /**< Control register 1 */ + __io uint32 CR2; /**< Control register 2 */ + __io uint32 SR; /**< Status register */ + __io uint32 DR; /**< Data register */ + __io uint32 CRCPR; /**< CRC polynomial register */ + __io uint32 RXCRCR; /**< RX CRC register */ + __io uint32 TXCRCR; /**< TX CRC register */ + __io uint32 I2SCFGR; /**< I2S configuration register */ + __io uint32 I2SPR; /**< I2S prescaler register */ +} spi_reg_map; + +/** SPI1 register map base pointer */ +#define SPI1_BASE ((struct spi_reg_map*)0x40013000) +/** SPI2 register map base pointer */ +#define SPI2_BASE ((struct spi_reg_map*)0x40003800) +/** SPI3 register map base pointer */ +#define SPI3_BASE ((struct spi_reg_map*)0x40003C00) + +/* + * Register bit definitions + */ + +/* Control register 1 */ + +#define SPI_CR1_BIDIMODE_BIT 15 +#define SPI_CR1_BIDIOE_BIT 14 +#define SPI_CR1_CRCEN_BIT 13 +#define SPI_CR1_CRCNEXT_BIT 12 +#define SPI_CR1_DFF_BIT 11 +#define SPI_CR1_RXONLY_BIT 10 +#define SPI_CR1_SSM_BIT 9 +#define SPI_CR1_SSI_BIT 8 +#define SPI_CR1_LSBFIRST_BIT 7 +#define SPI_CR1_SPE_BIT 6 +#define SPI_CR1_MSTR_BIT 2 +#define SPI_CR1_CPOL_BIT 1 +#define SPI_CR1_CPHA_BIT 0 + +#define SPI_CR1_BIDIMODE BIT(SPI_CR1_BIDIMODE_BIT) +#define SPI_CR1_BIDIMODE_2_LINE (0x0 << SPI_CR1_BIDIMODE_BIT) +#define SPI_CR1_BIDIMODE_1_LINE (0x1 << SPI_CR1_BIDIMODE_BIT) +#define SPI_CR1_BIDIOE BIT(SPI_CR1_BIDIOE_BIT) +#define SPI_CR1_CRCEN BIT(SPI_CR1_CRCEN_BIT) +#define SPI_CR1_CRCNEXT BIT(SPI_CR1_CRCNEXT_BIT) +#define SPI_CR1_DFF BIT(SPI_CR1_DFF_BIT) +#define SPI_CR1_DFF_8_BIT (0x0 << SPI_CR1_DFF_BIT) +#define SPI_CR1_DFF_16_BIT (0x1 << SPI_CR1_DFF_BIT) +#define SPI_CR1_RXONLY BIT(SPI_CR1_RXONLY_BIT) +#define SPI_CR1_SSM BIT(SPI_CR1_SSM_BIT) +#define SPI_CR1_SSI BIT(SPI_CR1_SSI_BIT) +#define SPI_CR1_LSBFIRST BIT(SPI_CR1_LSBFIRST_BIT) +#define SPI_CR1_SPE BIT(SPI_CR1_SPE_BIT) +#define SPI_CR1_BR (0x7 << 3) +#define SPI_CR1_BR_PCLK_DIV_2 (0x0 << 3) +#define SPI_CR1_BR_PCLK_DIV_4 (0x1 << 3) +#define SPI_CR1_BR_PCLK_DIV_8 (0x2 << 3) +#define SPI_CR1_BR_PCLK_DIV_16 (0x3 << 3) +#define SPI_CR1_BR_PCLK_DIV_32 (0x4 << 3) +#define SPI_CR1_BR_PCLK_DIV_64 (0x5 << 3) +#define SPI_CR1_BR_PCLK_DIV_128 (0x6 << 3) +#define SPI_CR1_BR_PCLK_DIV_256 (0x7 << 3) +#define SPI_CR1_MSTR BIT(SPI_CR1_MSTR_BIT) +#define SPI_CR1_CPOL BIT(SPI_CR1_CPOL_BIT) +#define SPI_CR1_CPOL_LOW (0x0 << SPI_CR1_CPOL_BIT) +#define SPI_CR1_CPOL_HIGH (0x1 << SPI_CR1_CPOL_BIT) +#define SPI_CR1_CPHA BIT(SPI_CR1_CPHA_BIT) + +/* Control register 2 */ + +/* RM0008-ism: SPI CR2 has "TXDMAEN" and "RXDMAEN" bits, while the + * USARTs have CR3 "DMAR" and "DMAT" bits. */ + +#define SPI_CR2_TXEIE_BIT 7 +#define SPI_CR2_RXNEIE_BIT 6 +#define SPI_CR2_ERRIE_BIT 5 +#define SPI_CR2_SSOE_BIT 2 +#define SPI_CR2_TXDMAEN_BIT 1 +#define SPI_CR2_RXDMAEN_BIT 0 + +#define SPI_CR2_TXEIE BIT(SPI_CR2_TXEIE_BIT) +#define SPI_CR2_RXNEIE BIT(SPI_CR2_RXNEIE_BIT) +#define SPI_CR2_ERRIE BIT(SPI_CR2_ERRIE_BIT) +#define SPI_CR2_SSOE BIT(SPI_CR2_SSOE_BIT) +#define SPI_CR2_TXDMAEN BIT(SPI_CR2_TXDMAEN_BIT) +#define SPI_CR2_RXDMAEN BIT(SPI_CR2_RXDMAEN_BIT) + +/* Status register */ + +#define SPI_SR_BSY_BIT 7 +#define SPI_SR_OVR_BIT 6 +#define SPI_SR_MODF_BIT 5 +#define SPI_SR_CRCERR_BIT 4 +#define SPI_SR_UDR_BIT 3 +#define SPI_SR_CHSIDE_BIT 2 +#define SPI_SR_TXE_BIT 1 +#define SPI_SR_RXNE_BIT 0 + +#define SPI_SR_BSY BIT(SPI_SR_BSY_BIT) +#define SPI_SR_OVR BIT(SPI_SR_OVR_BIT) +#define SPI_SR_MODF BIT(SPI_SR_MODF_BIT) +#define SPI_SR_CRCERR BIT(SPI_SR_CRCERR_BIT) +#define SPI_SR_UDR BIT(SPI_SR_UDR_BIT) +#define SPI_SR_CHSIDE BIT(SPI_SR_CHSIDE_BIT) +#define SPI_SR_CHSIDE_LEFT (0x0 << SPI_SR_CHSIDE_BIT) +#define SPI_SR_CHSIDE_RIGHT (0x1 << SPI_SR_CHSIDE_BIT) +#define SPI_SR_TXE BIT(SPI_SR_TXE_BIT) +#define SPI_SR_RXNE BIT(SPI_SR_RXNE_BIT) + +/* I2S configuration register */ + +/* RM0008-ism: CR1 has "CPOL", I2SCFGR has "CKPOL". */ + +#define SPI_I2SCFGR_I2SMOD_BIT 11 +#define SPI_I2SCFGR_I2SE_BIT 10 +#define SPI_I2SCFGR_PCMSYNC_BIT 7 +#define SPI_I2SCFGR_CKPOL_BIT 3 +#define SPI_I2SCFGR_CHLEN_BIT 0 + +#define SPI_I2SCFGR_I2SMOD BIT(SPI_I2SCFGR_I2SMOD_BIT) +#define SPI_I2SCFGR_I2SMOD_SPI (0x0 << SPI_I2SCFGR_I2SMOD_BIT) +#define SPI_I2SCFGR_I2SMOD_I2S (0x1 << SPI_I2SCFGR_I2SMOD_BIT) +#define SPI_I2SCFGR_I2SE BIT(SPI_I2SCFGR_I2SE_BIT) +#define SPI_I2SCFGR_I2SCFG (0x3 << 8) +#define SPI_I2SCFGR_I2SCFG_SLAVE_TX (0x0 << 8) +#define SPI_I2SCFGR_I2SCFG_SLAVE_RX (0x1 << 8) +#define SPI_I2SCFGR_I2SCFG_MASTER_TX (0x2 << 8) +#define SPI_I2SCFGR_I2SCFG_MASTER_RX (0x3 << 8) +#define SPI_I2SCFGR_PCMSYNC BIT(SPI_I2SCFGR_PCMSYNC_BIT) +#define SPI_I2SCFGR_PCMSYNC_SHORT (0x0 << SPI_I2SCFGR_PCMSYNC_BIT) +#define SPI_I2SCFGR_PCMSYNC_LONG (0x1 << SPI_I2SCFGR_PCMSYNC_BIT) +#define SPI_I2SCFGR_I2SSTD (0x3 << 4) +#define SPI_I2SCFGR_I2SSTD_PHILLIPS (0x0 << 4) +#define SPI_I2SCFGR_I2SSTD_MSB (0x1 << 4) +#define SPI_I2SCFGR_I2SSTD_LSB (0x2 << 4) +#define SPI_I2SCFGR_I2SSTD_PCM (0x3 << 4) +#define SPI_I2SCFGR_CKPOL BIT(SPI_I2SCFGR_CKPOL_BIT) +#define SPI_I2SCFGR_CKPOL_LOW (0x0 << SPI_I2SCFGR_CKPOL_BIT) +#define SPI_I2SCFGR_CKPOL_HIGH (0x1 << SPI_I2SCFGR_CKPOL_BIT) +#define SPI_I2SCFGR_DATLEN (0x3 << 1) +#define SPI_I2SCFGR_DATLEN_16_BIT (0x0 << 1) +#define SPI_I2SCFGR_DATLEN_24_BIT (0x1 << 1) +#define SPI_I2SCFGR_DATLEN_32_BIT (0x2 << 1) +#define SPI_I2SCFGR_CHLEN BIT(SPI_I2SCFGR_CHLEN_BIT) +#define SPI_I2SCFGR_CHLEN_16_BIT (0x0 << SPI_I2SCFGR_CHLEN_BIT) +#define SPI_I2SCFGR_CHLEN_32_BIT (0x1 << SPI_I2SCFGR_CHLEN_BIT) + +/* + * Devices + */ + +/** SPI device type */ +typedef struct spi_dev { + spi_reg_map *regs; /**< Register map */ + rcc_clk_id clk_id; /**< RCC clock information */ + nvic_irq_num irq_num; /**< NVIC interrupt number */ +} spi_dev; + +extern spi_dev *SPI1; +extern spi_dev *SPI2; +#ifdef STM32_HIGH_DENSITY +extern spi_dev *SPI3; +#endif + +/* + * SPI Convenience functions + */ + +void spi_init(spi_dev *dev); + +void spi_gpio_cfg(uint8 as_master, + gpio_dev *nss_dev, + uint8 nss_bit, + gpio_dev *comm_dev, + uint8 sck_bit, + uint8 miso_bit, + uint8 mosi_bit); + +/** + * @brief SPI mode configuration. + * + * Determines a combination of clock polarity (CPOL), which determines + * idle state of the clock line, and clock phase (CPHA), which + * determines which clock edge triggers data capture. + */ +typedef enum spi_mode { + SPI_MODE_0, /**< Clock line idles low (0), data capture on first + clock transition. */ + SPI_MODE_1, /**< Clock line idles low (0), data capture on second + clock transition */ + SPI_MODE_2, /**< Clock line idles high (1), data capture on first + clock transition. */ + SPI_MODE_3 /**< Clock line idles high (1), data capture on + second clock transition. */ +} spi_mode; + +/** + * @brief SPI baud rate configuration, as a divisor of f_PCLK, the + * PCLK clock frequency. + */ +typedef enum spi_baud_rate { + SPI_BAUD_PCLK_DIV_2 = SPI_CR1_BR_PCLK_DIV_2, /**< f_PCLK/2 */ + SPI_BAUD_PCLK_DIV_4 = SPI_CR1_BR_PCLK_DIV_4, /**< f_PCLK/4 */ + SPI_BAUD_PCLK_DIV_8 = SPI_CR1_BR_PCLK_DIV_8, /**< f_PCLK/8 */ + SPI_BAUD_PCLK_DIV_16 = SPI_CR1_BR_PCLK_DIV_16, /**< f_PCLK/16 */ + SPI_BAUD_PCLK_DIV_32 = SPI_CR1_BR_PCLK_DIV_32, /**< f_PCLK/32 */ + SPI_BAUD_PCLK_DIV_64 = SPI_CR1_BR_PCLK_DIV_64, /**< f_PCLK/64 */ + SPI_BAUD_PCLK_DIV_128 = SPI_CR1_BR_PCLK_DIV_128, /**< f_PCLK/128 */ + SPI_BAUD_PCLK_DIV_256 = SPI_CR1_BR_PCLK_DIV_256, /**< f_PCLK/256 */ +} spi_baud_rate; + +/** + * @brief SPI initialization flags. + * @see spi_master_enable() + * @see spi_slave_enable() + */ +typedef enum spi_cfg_flag { + SPI_BIDIMODE = SPI_CR1_BIDIMODE, /**< Bidirectional mode enable */ + SPI_BIDIOE = SPI_CR1_BIDIOE, /**< Output enable in bidirectional + mode */ + SPI_CRCEN = SPI_CR1_CRCEN, /**< Cyclic redundancy check (CRC) + enable */ + SPI_DFF_8_BIT = SPI_CR1_DFF_8_BIT, /**< 8-bit data frame format (this is + the default) */ + SPI_DFF_16_BIT = SPI_CR1_DFF_16_BIT, /**< 16-bit data frame format */ + SPI_RX_ONLY = SPI_CR1_RXONLY, /**< Receive only */ + SPI_SW_SLAVE = SPI_CR1_SSM, /**< Software slave management */ + SPI_SOFT_SS = SPI_CR1_SSI, /**< Software (internal) slave + select. This flag only has an + effect when used in combination + with SPI_SW_SLAVE. */ + SPI_FRAME_LSB = SPI_CR1_LSBFIRST, /**< LSB-first (little-endian) frame + format */ + SPI_FRAME_MSB = 0, /**< MSB-first (big-endian) frame + format (this is the default) */ +} spi_cfg_flag; + +void spi_master_enable(spi_dev *dev, + spi_baud_rate baud, + spi_mode mode, + uint32 flags); + +void spi_slave_enable(spi_dev *dev, + spi_mode mode, + uint32 flags); + +uint32 spi_tx(spi_dev *dev, const void *buf, uint32 len); + +void spi_foreach(void (*fn)(spi_dev (*dev))); + +void spi_peripheral_enable(spi_dev *dev); +void spi_peripheral_disable(spi_dev *dev); + +void spi_tx_dma_enable(spi_dev *dev); +void spi_tx_dma_disable(spi_dev *dev); + +void spi_rx_dma_enable(spi_dev *dev); +void spi_rx_dma_disable(spi_dev *dev); + +/** + * @brief Determine if a SPI peripheral is enabled. + * @param dev SPI device + * @return True, if and only if dev's peripheral is enabled. + */ +static inline uint8 spi_is_enabled(spi_dev *dev) { + return dev->regs->CR1 & SPI_CR1_SPE_BIT; +} + +/** + * @brief Disable all SPI peripherals + */ +static inline void spi_peripheral_disable_all(void) { + spi_foreach(spi_peripheral_disable); +} + +/** Available SPI interrupts */ +typedef enum spi_interrupt { + SPI_TXE_INTERRUPT = SPI_CR2_TXEIE, /**< TX buffer empty interrupt */ + SPI_RXNE_INTERRUPT = SPI_CR2_RXNEIE, /**< RX buffer not empty interrupt */ + SPI_ERR_INTERRUPT = SPI_CR2_ERRIE /**< + * Error interrupt (CRC, overrun, + * and mode fault errors for SPI; + * underrun, overrun errors for I2S) + */ +} spi_interrupt; + +/** + * @brief Mask for all spi_interrupt values + * @see spi_interrupt + */ +#define SPI_INTERRUPTS_ALL (SPI_TXE_INTERRUPT | \ + SPI_RXNE_INTERRUPT | \ + SPI_ERR_INTERRUPT) + +/** + * @brief Enable SPI interrupt requests + * @param dev SPI device + * @param interrupt_flags Bitwise OR of spi_interrupt values to enable + * @see spi_interrupt + */ +static inline void spi_irq_enable(spi_dev *dev, uint32 interrupt_flags) { + dev->regs->CR2 |= interrupt_flags; + nvic_irq_enable(dev->irq_num); +} + +/** + * @brief Disable SPI interrupt requests + * @param dev SPI device + * @param interrupt_flags Bitwise OR of spi_interrupt values to disable + * @see spi_interrupt + */ +static inline void spi_irq_disable(spi_dev *dev, uint32 interrupt_flags) { + dev->regs->CR2 &= ~interrupt_flags; +} + +/** + * @brief Get the data frame format flags with which a SPI port is + * configured. + * @param dev SPI device whose data frame format to get. + * @return SPI_DFF_8_BIT, if dev has an 8-bit data frame format. + * Otherwise, SPI_DFF_16_BIT. + */ +static inline spi_cfg_flag spi_dff(spi_dev *dev) { + return ((dev->regs->CR1 & SPI_CR1_DFF) == SPI_CR1_DFF_8_BIT ? + SPI_DFF_8_BIT : + SPI_DFF_16_BIT); +} + +/** + * @brief Determine whether the device's peripheral receive (RX) + * register is empty. + * @param dev SPI device + * @return true, iff dev's RX register is empty. + */ +static inline uint8 spi_is_rx_nonempty(spi_dev *dev) { + return dev->regs->SR & SPI_SR_RXNE; +} + +/** + * @brief Retrieve the contents of the device's peripheral receive + * (RX) register. + * + * You may only call this function when the RX register is nonempty. + * Calling this function clears the contents of the RX register. + * + * @param dev SPI device + * @return Contents of dev's peripheral RX register + * @see spi_is_rx_reg_nonempty() + */ +static inline uint16 spi_rx_reg(spi_dev *dev) { + return (uint16)dev->regs->DR; +} + +/** + * @brief Determine whether the device's peripheral transmit (TX) + * register is empty. + * @param dev SPI device + * @return true, iff dev's TX register is empty. + */ +static inline uint8 spi_is_tx_empty(spi_dev *dev) { + return dev->regs->SR & SPI_SR_TXE; +} + +/** + * @brief Load a value into the device's peripheral transmit (TX) register. + * + * You may only call this function when the TX register is empty. + * Calling this function loads val into the peripheral's TX register. + * If the device is properly configured, this will initiate a + * transmission, the completion of which will cause the TX register to + * be empty again. + * + * @param dev SPI device + * @param val Value to load into the TX register. If the SPI data + * frame format is 8 bit, the value must be right-aligned. + * @see spi_is_tx_reg_empty() + * @see spi_init() + * @see spi_master_enable() + * @see spi_slave_enable() + */ +static inline void spi_tx_reg(spi_dev *dev, uint16 val) { + dev->regs->DR = val; +} + +/** + * @brief Determine whether the device's peripheral busy (SPI_SR_BSY) + * flag is set. + * @param dev SPI device + * @return true, iff dev's BSY flag is set. + */ +static inline uint8 spi_is_busy(spi_dev *dev) { + return dev->regs->SR & SPI_SR_BSY; +} + +/* + * I2S convenience functions (TODO) + */ + +#ifdef __cplusplus +} +#endif + +#endif |