aboutsummaryrefslogtreecommitdiffstats
path: root/examples
diff options
context:
space:
mode:
Diffstat (limited to 'examples')
-rw-r--r--examples/test-session.cpp32
1 files changed, 19 insertions, 13 deletions
diff --git a/examples/test-session.cpp b/examples/test-session.cpp
index d856067..845547d 100644
--- a/examples/test-session.cpp
+++ b/examples/test-session.cpp
@@ -15,6 +15,9 @@
//#define COMM Serial2
//#define COMM Serial3
+
+#define ESC ((uint8)27)
+
int rate = 0;
#if defined(BOARD_maple)
@@ -27,8 +30,13 @@ const uint8 adc_pins[] =
const uint8 pwm_pins[] = {3, 4, 5, 8, 9, 10, 11, 15, 16, 25, 26, 27};
const uint8 adc_pins[] = {3, 4, 5, 6, 7, 8, 9, 10, 11, 33}; // NB: 33 is LED
-#elif defined(BOARD_maple_native) // TODO maple native
-#error "No Maple Native support here yet"
+#elif defined(BOARD_maple_native)
+const uint8 pwm_pins[] = {12, 13, 14, 15, 22, 23, 24, 25, 37, 38, 45,
+ 46, 47, 48, 49, 50, 53, 54};
+const uint8 adc_pins[] = {6, 7, 8, 9, 10, 11,
+ /* the following are on ADC3, which lacks support:
+ 39, 40, 41, 42, 43, 45, */
+ 46, 47, 48, 49, 50, 51, 52, 53, 54};
#else
#error "Board type has not been selected correctly"
@@ -37,10 +45,8 @@ const uint8 adc_pins[] = {3, 4, 5, 6, 7, 8, 9, 10, 11, 33}; // NB: 33 is LED
uint8 gpio_state[NR_GPIO_PINS];
-#define DUMMY_DAT ("qwertyuiopasdfghjklzxcvbnmmmmmm,./1234567890-=" \
- "qwertyuiopasdfghjklzxcvbnm,./1234567890")
-
-#define ESC ((uint8)27)
+const char* const dummy_dat = ("qwertyuiopasdfghjklzxcvbnmmmmmm,./1234567890-="
+ "qwertyuiopasdfghjklzxcvbnm,./1234567890");
void cmd_print_help(void);
void cmd_adc_stats(void);
@@ -145,16 +151,16 @@ void loop () {
case 'W':
while(!COMM.available()) {
- Serial1.print(DUMMY_DAT);
- Serial2.print(DUMMY_DAT);
- Serial3.print(DUMMY_DAT);
+ Serial1.print(dummy_dat);
+ Serial2.print(dummy_dat);
+ Serial3.print(dummy_dat);
}
break;
case 'U':
COMM.println("Dumping data to USB. Press any key.");
while(!COMM.available()) {
- SerialUSB.print(DUMMY_DAT);
+ SerialUSB.print(dummy_dat);
}
break;
@@ -324,8 +330,8 @@ void cmd_stressful_adc_stats(void) {
pwmWrite(pwm_pins[j], 1000 + i);
}
}
- SerialUSB.print(DUMMY_DAT);
- SerialUSB.print(DUMMY_DAT);
+ SerialUSB.print(dummy_dat);
+ SerialUSB.print(dummy_dat);
measure_adc_noise(adc_pins[i]);
for(uint32 j = 2; j<(uint32)sizeof(pwm_pins); j++) {
if(adc_pins[i] != pwm_pins[j]) {
@@ -389,7 +395,7 @@ void do_serials(HardwareSerial **serials, int n, unsigned baud) {
}
while (!COMM.available()) {
for (int i = 0; i < n; i++) {
- serials[i]->println(DUMMY_DAT);
+ serials[i]->println(dummy_dat);
if (serials[i]->available()) {
serials[i]->println(serials[i]->read());
delay(1000);