diff options
| author | Marti Bolivar <mbolivar@leaflabs.com> | 2011-11-29 02:48:58 -0500 |
|---|---|---|
| committer | Marti Bolivar <mbolivar@leaflabs.com> | 2012-04-11 16:56:52 -0400 |
| commit | a39a5af1cbc6f729f5577c52589538533de7c311 (patch) | |
| tree | 2a7f49a123b7267dad7b3f26abd02f95a70ed0a7 /support/make/target-config.mk | |
| parent | 3cbf2d87bfbf2d5c680525197dee861fe9a6c575 (diff) | |
| download | librambutan-a39a5af1cbc6f729f5577c52589538533de7c311.tar.gz librambutan-a39a5af1cbc6f729f5577c52589538533de7c311.zip | |
build system: Add board include files for target-config.mk.
target-config.mk is getting a little long with all the boards in
it. Break out the board-specific bits into individual files under
support/make/board-includes.
This has the added benefit that adding a new board requires less
dirtying of the working tree, which is nice for jumping around
branches with an experimental board.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
Diffstat (limited to 'support/make/target-config.mk')
| -rw-r--r-- | support/make/target-config.mk | 48 |
1 files changed, 3 insertions, 45 deletions
diff --git a/support/make/target-config.mk b/support/make/target-config.mk index 2e360ea..fcedd3e 100644 --- a/support/make/target-config.mk +++ b/support/make/target-config.mk @@ -2,52 +2,10 @@ TARGET_FLAGS := -# Board-specific configuration values. Flash and SRAM sizes in bytes. +# Board-specific configuration values. Punt these to board-specific +# include files. -ifeq ($(BOARD), maple) - MCU := STM32F103RB - PRODUCT_ID := 0003 - ERROR_LED_PORT := GPIOA - ERROR_LED_PIN := 5 - DENSITY := STM32_MEDIUM_DENSITY - TARGET_FLAGS += -D$(DENSITY) -endif - -ifeq ($(BOARD), maple_native) - MCU := STM32F103ZE - PRODUCT_ID := 0003 - ERROR_LED_PORT := GPIOC - ERROR_LED_PIN := 15 - DENSITY := STM32_HIGH_DENSITY - TARGET_FLAGS += -D$(DENSITY) -endif - -ifeq ($(BOARD), maple_mini) - MCU := STM32F103CB - PRODUCT_ID := 0003 - ERROR_LED_PORT := GPIOB - ERROR_LED_PIN := 1 - DENSITY := STM32_MEDIUM_DENSITY - TARGET_FLAGS += -D$(DENSITY) -endif - -ifeq ($(BOARD), maple_RET6) - MCU := STM32F103RE - PRODUCT_ID := 0003 - ERROR_LED_PORT := GPIOA - ERROR_LED_PIN := 5 - DENSITY := STM32_HIGH_DENSITY - TARGET_FLAGS += -D$(DENSITY) -endif - -ifeq ($(BOARD), olimex_stm32_h103) - MCU := STM32F103RB - PRODUCT_ID := 0003 - ERROR_LED_PORT := GPIOC - ERROR_LED_PIN := 12 - DENSITY := STM32_MEDIUM_DENSITY - TARGET_FLAGS += -D$(DENSITY) -endif +include $(MAKEDIR)/board-includes/$(BOARD).mk TARGET_FLAGS += -DBOARD_$(BOARD) -DMCU_$(MCU) \ -DERROR_LED_PORT=$(ERROR_LED_PORT) \ |