diff options
Diffstat (limited to 'support/kconfig/streamline_config.pl')
| -rw-r--r-- | support/kconfig/streamline_config.pl | 291 |
1 files changed, 237 insertions, 54 deletions
diff --git a/support/kconfig/streamline_config.pl b/support/kconfig/streamline_config.pl index a4fe923c0..336893969 100644 --- a/support/kconfig/streamline_config.pl +++ b/support/kconfig/streamline_config.pl @@ -43,6 +43,17 @@ # make oldconfig # use strict; +use Getopt::Long; + +# set the environment variable LOCALMODCONFIG_DEBUG to get +# debug output. +my $debugprint = 0; +$debugprint = 1 if (defined($ENV{LOCALMODCONFIG_DEBUG})); + +sub dprint { + return if (!$debugprint); + print STDERR @_; +} my $config = ".config"; @@ -89,7 +100,7 @@ my @searchconfigs = ( }, ); -sub find_config { +sub read_config { foreach my $conf (@searchconfigs) { my $file = $conf->{"file"}; @@ -104,18 +115,27 @@ sub find_config { print STDERR "using config: '$file'\n"; - open(CIN, "$exec $file |") || die "Failed to run $exec $file"; - return; + open(my $infile, '-|', "$exec $file") || die "Failed to run $exec $file"; + my @x = <$infile>; + close $infile; + return @x; } die "No config file found"; } -find_config; +my @config_file = read_config; + +# Parse options +my $localmodconfig = 0; +my $localyesconfig = 0; + +GetOptions("localmodconfig" => \$localmodconfig, + "localyesconfig" => \$localyesconfig); # Get the build source and top level Kconfig file (passed in) -my $ksource = $ARGV[0]; +my $ksource = ($ARGV[0] ? $ARGV[0] : '.'); my $kconfig = $ARGV[1]; -my $lsmod_file = $ARGV[2]; +my $lsmod_file = $ENV{'LSMOD'}; my @makefiles = `find $ksource -name Makefile 2>/dev/null`; chomp @makefiles; @@ -151,8 +171,8 @@ sub read_kconfig { $source =~ s/\$$env/$ENV{$env}/; } - open(KIN, "$source") || die "Can't open $kconfig"; - while (<KIN>) { + open(my $kinfile, '<', $source) || die "Can't open $kconfig"; + while (<$kinfile>) { chomp; # Make sure that lines ending with \ continue @@ -178,6 +198,7 @@ sub read_kconfig { $state = "NEW"; $config = $2; + # Add depends for 'if' nesting for (my $i = 0; $i < $iflevel; $i++) { if ($i) { $depends{$config} .= " " . $ifdeps[$i]; @@ -196,10 +217,11 @@ sub read_kconfig { # Get the configs that select this config } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) { - if (defined($selects{$1})) { - $selects{$1} .= " " . $config; + my $conf = $1; + if (defined($selects{$conf})) { + $selects{$conf} .= " " . $config; } else { - $selects{$1} = $config; + $selects{$conf} = $config; } # configs without prompts must be selected @@ -227,10 +249,10 @@ sub read_kconfig { $state = "NONE"; } } - close(KIN); + close($kinfile); # read in any configs that were found. - foreach $kconfig (@kconfigs) { + foreach my $kconfig (@kconfigs) { if (!defined($read_kconfigs{$kconfig})) { $read_kconfigs{$kconfig} = 1; read_kconfig($kconfig); @@ -242,33 +264,63 @@ if ($kconfig) { read_kconfig($kconfig); } +# Makefiles can use variables to define their dependencies +sub convert_vars { + my ($line, %vars) = @_; + + my $process = ""; + + while ($line =~ s/^(.*?)(\$\((.*?)\))//) { + my $start = $1; + my $variable = $2; + my $var = $3; + + if (defined($vars{$var})) { + $process .= $start . $vars{$var}; + } else { + $process .= $start . $variable; + } + } + + $process .= $line; + + return $process; +} + # Read all Makefiles to map the configs to the objects foreach my $makefile (@makefiles) { - my $cont = 0; + my $line = ""; + my %make_vars; + + open(my $infile, '<', $makefile) || die "Can't open $makefile"; + while (<$infile>) { + # if this line ends with a backslash, continue + chomp; + if (/^(.*)\\$/) { + $line .= $1; + next; + } + + $line .= $_; + $_ = $line; + $line = ""; - open(MIN,$makefile) || die "Can't open $makefile"; - while (<MIN>) { my $objs; - # is this a line after a line with a backslash? - if ($cont && /(\S.*)$/) { - $objs = $1; - } - $cont = 0; + # Convert variables in a line (could define configs) + $_ = convert_vars($_, %make_vars); # collect objects after obj-$(CONFIG_FOO_BAR) if (/obj-\$\((CONFIG_[^\)]*)\)\s*[+:]?=\s*(.*)/) { $var = $1; $objs = $2; + + # check if variables are set + } elsif (/^\s*(\S+)\s*[:]?=\s*(.*\S)/) { + $make_vars{$1} = $2; } if (defined($objs)) { - # test if the line ends with a backslash - if ($objs =~ m,(.*)\\$,) { - $objs = $1; - $cont = 1; - } - foreach my $obj (split /\s+/,$objs) { $obj =~ s/-/_/g; if ($obj =~ /(.*)\.o$/) { @@ -289,22 +341,24 @@ foreach my $makefile (@makefiles) { } } } - close(MIN); + close($infile); } my %modules; +my $linfile; if (defined($lsmod_file)) { if ( ! -f $lsmod_file) { - die "$lsmod_file not found"; - } - if ( -x $lsmod_file) { - # the file is executable, run it - open(LIN, "$lsmod_file|"); - } else { - # Just read the contents - open(LIN, "$lsmod_file"); + if ( -f $ENV{'objtree'}."/".$lsmod_file) { + $lsmod_file = $ENV{'objtree'}."/".$lsmod_file; + } else { + die "$lsmod_file not found"; + } } + + my $otype = ( -x $lsmod_file) ? '-|' : '<'; + open($linfile, $otype, $lsmod_file); + } else { # see what modules are loaded on this system @@ -321,25 +375,27 @@ if (defined($lsmod_file)) { $lsmod = "lsmod"; } - open(LIN,"$lsmod|") || die "Can not call lsmod with $lsmod"; + open($linfile, '-|', $lsmod) || die "Can not call lsmod with $lsmod"; } -while (<LIN>) { +while (<$linfile>) { next if (/^Module/); # Skip the first line. if (/^(\S+)/) { $modules{$1} = 1; } } -close (LIN); +close ($linfile); # add to the configs hash all configs that are needed to enable -# a loaded module. +# a loaded module. This is a direct obj-${CONFIG_FOO} += bar.o +# where we know we need bar.o so we add FOO to the list. my %configs; foreach my $module (keys(%modules)) { if (defined($objects{$module})) { my @arr = @{$objects{$module}}; foreach my $conf (@arr) { $configs{$conf} = $module; + dprint "$conf added by direct ($module)\n"; } } else { # Most likely, someone has a custom (binary?) module loaded. @@ -347,9 +403,24 @@ foreach my $module (keys(%modules)) { } } +# Read the current config, and see what is enabled. We want to +# ignore configs that we would not enable anyway. + +my %orig_configs; my $valid = "A-Za-z_0-9"; + +foreach my $line (@config_file) { + $_ = $line; + + if (/(CONFIG_[$valid]*)=(m|y)/) { + $orig_configs{$1} = $2; + } +} + my $repeat = 1; +my $depconfig; + # # Note, we do not care about operands (like: &&, ||, !) we want to add any # config that is in the depend list of another config. This script does @@ -358,7 +429,7 @@ my $repeat = 1; # to keep on. If A was on in the original config, B would not have been # and B would not be turned on by this script. # -sub parse_config_dep_select +sub parse_config_depends { my ($p) = @_; @@ -369,10 +440,16 @@ sub parse_config_dep_select $p =~ s/^[^$valid]*[$valid]+//; + # We only need to process if the depend config is a module + if (!defined($orig_configs{$conf}) || !$orig_configs{conf} eq "m") { + next; + } + if (!defined($configs{$conf})) { # We must make sure that this config has its # dependencies met. $repeat = 1; # do again + dprint "$conf selected by depend $depconfig\n"; $configs{$conf} = 1; } } else { @@ -381,31 +458,132 @@ sub parse_config_dep_select } } -while ($repeat) { - $repeat = 0; +# Select is treated a bit differently than depends. We call this +# when a config has no prompt and requires another config to be +# selected. We use to just select all configs that selected this +# config, but found that that can balloon into enabling hundreds +# of configs that we do not care about. +# +# The idea is we look at all the configs that select it. If one +# is already in our list of configs to enable, then there's nothing +# else to do. If there isn't, we pick the first config that was +# enabled in the orignal config and use that. +sub parse_config_selects +{ + my ($config, $p) = @_; - foreach my $config (keys %configs) { - $config =~ s/^CONFIG_//; + my $next_config; + + while ($p =~ /[$valid]/) { + + if ($p =~ /^[^$valid]*([$valid]+)/) { + my $conf = "CONFIG_" . $1; - if (defined($depends{$config})) { - # This config has dependencies. Make sure they are also included - parse_config_dep_select $depends{$config}; + $p =~ s/^[^$valid]*[$valid]+//; + + # Make sure that this config exists in the current .config file + if (!defined($orig_configs{$conf})) { + dprint "$conf not set for $config select\n"; + next; + } + + # Check if something other than a module selects this config + if (defined($orig_configs{$conf}) && $orig_configs{$conf} ne "m") { + dprint "$conf (non module) selects config, we are good\n"; + # we are good with this + return; + } + if (defined($configs{$conf})) { + dprint "$conf selects $config so we are good\n"; + # A set config selects this config, we are good + return; + } + # Set this config to be selected + if (!defined($next_config)) { + $next_config = $conf; + } + } else { + die "this should never happen"; } + } - if (defined($prompts{$config}) || !defined($selects{$config})) { - next; + # If no possible config selected this, then something happened. + if (!defined($next_config)) { + print STDERR "WARNING: $config is required, but nothing in the\n"; + print STDERR " current config selects it.\n"; + return; + } + + # If we are here, then we found no config that is set and + # selects this config. Repeat. + $repeat = 1; + # Make this config need to be selected + $configs{$next_config} = 1; + dprint "$next_config selected by select $config\n"; +} + +my %process_selects; + +# loop through all configs, select their dependencies. +sub loop_depend { + $repeat = 1; + + while ($repeat) { + $repeat = 0; + + forloop: + foreach my $config (keys %configs) { + + # If this config is not a module, we do not need to process it + if (defined($orig_configs{$config}) && $orig_configs{$config} ne "m") { + next forloop; + } + + $config =~ s/^CONFIG_//; + $depconfig = $config; + + if (defined($depends{$config})) { + # This config has dependencies. Make sure they are also included + parse_config_depends $depends{$config}; + } + + # If the config has no prompt, then we need to check if a config + # that is enabled selected it. Or if we need to enable one. + if (!defined($prompts{$config}) && defined($selects{$config})) { + $process_selects{$config} = 1; + } } + } +} + +sub loop_select { + + foreach my $config (keys %process_selects) { + $config =~ s/^CONFIG_//; + + dprint "Process select $config\n"; # config has no prompt and must be selected. - parse_config_dep_select $selects{$config}; + parse_config_selects $config, $selects{$config}; } } +while ($repeat) { + # Get the first set of configs and their dependencies. + loop_depend; + + $repeat = 0; + + # Now we need to see if we have to check selects; + loop_select; +} + my %setconfigs; # Finally, read the .config file and turn off any module enabled that # we could not find a reason to keep enabled. -while(<CIN>) { +foreach my $line (@config_file) { + $_ = $line; if (/CONFIG_IKCONFIG/) { if (/# CONFIG_IKCONFIG is not set/) { @@ -421,7 +599,13 @@ while(<CIN>) { if (/^(CONFIG.*)=(m|y)/) { if (defined($configs{$1})) { - $setconfigs{$1} = $2; + if ($localyesconfig) { + $setconfigs{$1} = 'y'; + print "$1=y\n"; + next; + } else { + $setconfigs{$1} = $2; + } } elsif ($2 eq "m") { print "# $1 is not set\n"; next; @@ -429,7 +613,6 @@ while(<CIN>) { } print; } -close(CIN); # Integrity check, make sure all modules that we want enabled do # indeed have their configs set. |