summaryrefslogtreecommitdiffstats
path: root/support/kconfig/Makefile
diff options
context:
space:
mode:
Diffstat (limited to 'support/kconfig/Makefile')
-rw-r--r--support/kconfig/Makefile145
1 files changed, 50 insertions, 95 deletions
diff --git a/support/kconfig/Makefile b/support/kconfig/Makefile
index f2def76f0..d28b7ac45 100644
--- a/support/kconfig/Makefile
+++ b/support/kconfig/Makefile
@@ -11,6 +11,9 @@ else
Kconfig := Kconfig
endif
+# We need this, in case the user has it in its environment
+unexport CONFIG_
+
xconfig: $(obj)/qconf
$< $(Kconfig)
@@ -33,17 +36,9 @@ silentoldconfig: $(obj)/conf
$(Q)mkdir -p include/generated
$< --$@ $(Kconfig)
-# if no path is given, then use src directory to find file
-ifdef LSMOD
-LSMOD_F := $(LSMOD)
-ifeq ($(findstring /,$(LSMOD)),)
- LSMOD_F := $(objtree)/$(LSMOD)
-endif
-endif
-
-localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
+localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
$(Q)mkdir -p include/generated
- $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
+ $(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config
$(Q)if [ -f .config ]; then \
cmp -s .tmp.config .config || \
(mv -f .config .config.old.1; \
@@ -56,27 +51,10 @@ localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
fi
$(Q)rm -f .tmp.config
-localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
- $(Q)mkdir -p include/generated
- $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
- $(Q)sed -i s/=m/=y/ .tmp.config
- $(Q)if [ -f .config ]; then \
- cmp -s .tmp.config .config || \
- (mv -f .config .config.old.1; \
- mv -f .tmp.config .config; \
- $(obj)/conf --silentoldconfig $(Kconfig); \
- mv -f .config.old.1 .config.old) \
- else \
- mv -f .tmp.config .config; \
- $(obj)/conf --silentoldconfig $(Kconfig); \
- fi
- $(Q)rm -f .tmp.config
-
# Create new linux.pot file
# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
-# The symlink is used to repair a deficiency in arch/um
update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
- $(Q)echo " GEN config"
+ $(Q)echo " GEN config.pot"
$(Q)xgettext --default-domain=linux \
--add-comments --keyword=_ --keyword=N_ \
--from-code=UTF-8 \
@@ -84,16 +62,16 @@ update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
--directory=$(srctree) --directory=$(objtree) \
--output $(obj)/config.pot
$(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
- $(Q)ln -fs Kconfig.x86 arch/um/Kconfig
- $(Q)(for i in `ls $(srctree)/arch/*/Kconfig`; \
+ $(Q)(for i in `ls $(srctree)/arch/*/Kconfig \
+ $(srctree)/arch/*/um/Kconfig`; \
do \
- echo " GEN $$i"; \
+ echo " GEN $$i"; \
$(obj)/kxgettext $$i \
>> $(obj)/config.pot; \
done )
+ $(Q)echo " GEN linux.pot"
$(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
--output $(obj)/linux.pot
- $(Q)rm -f $(srctree)/arch/um/Kconfig
$(Q)rm -f $(obj)/config.pot
PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig
@@ -101,11 +79,17 @@ PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig
allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf
$< --$@ $(Kconfig)
-PHONY += listnewconfig oldnoconfig savedefconfig defconfig
+PHONY += listnewconfig olddefconfig oldnoconfig savedefconfig defconfig
-listnewconfig oldnoconfig: $(obj)/conf
+listnewconfig olddefconfig: $(obj)/conf
$< --$@ $(Kconfig)
+# oldnoconfig is an alias of olddefconfig, because people already are dependent
+# on its behavior(sets new symbols to their default value but not 'n') with the
+# counter-intuitive name.
+oldnoconfig: $(obj)/conf
+ $< --olddefconfig $(Kconfig)
+
savedefconfig: $(obj)/conf
$< --$@=defconfig $(Kconfig)
@@ -139,7 +123,7 @@ help:
@echo ' alldefconfig - New config with all symbols set to default'
@echo ' randconfig - New config with random answer to all options'
@echo ' listnewconfig - List new options'
- @echo ' oldnoconfig - Same as silentoldconfig but set new symbols to n (unset)'
+ @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value'
# lxdialog stuff
check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
@@ -170,8 +154,8 @@ mconf-objs := mconf.o zconf.tab.o $(lxdialog)
nconf-objs := nconf.o zconf.tab.o nconf.gui.o
kxgettext-objs := kxgettext.o zconf.tab.o
qconf-cxxobjs := qconf.o
-qconf-objs := kconfig_load.o zconf.tab.o
-gconf-objs := gconf.o kconfig_load.o zconf.tab.o
+qconf-objs := zconf.tab.o
+gconf-objs := gconf.o zconf.tab.o
hostprogs-y := conf
@@ -203,8 +187,8 @@ ifeq ($(gconf-target),1)
hostprogs-y += gconf
endif
-clean-files := lkc_defs.h qconf.moc .tmp_qtcheck .tmp_gtkcheck
-clean-files += zconf.tab.c lex.zconf.c zconf.hash.c gconf.glade.h
+clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck
+clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h
clean-files += mconf qconf gconf nconf
clean-files += config.pot linux.pot
@@ -220,15 +204,18 @@ always := dochecklxdialog
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))
# generated files seem to need this to find local include files
-HOSTCFLAGS_lex.zconf.o := -I$(src)
+HOSTCFLAGS_zconf.lex.o := -I$(src)
HOSTCFLAGS_zconf.tab.o := -I$(src)
-HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl
-HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
+LEX_PREFIX_zconf := zconf
+YACC_PREFIX_zconf := zconf
+
+HOSTLOADLIBES_qconf = $(KC_QT_LIBS)
+HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS)
-HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` -ldl
+HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
- -D LKC_DIRECT_LINK
+ -Wno-missing-prototypes
HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
@@ -256,12 +243,12 @@ $(obj)/.tmp_qtcheck:
if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
done; \
if [ -z "$$dir" ]; then \
- echo "*"; \
- echo "* Unable to find any QT installation. Please make sure that"; \
- echo "* the QT4 or QT3 development package is correctly installed and"; \
- echo "* either qmake can be found or install pkg-config or set"; \
- echo "* the QTDIR environment variable to the correct location."; \
- echo "*"; \
+ echo >&2 "*"; \
+ echo >&2 "* Unable to find any QT installation. Please make sure that"; \
+ echo >&2 "* the QT4 or QT3 development package is correctly installed and"; \
+ echo >&2 "* either qmake can be found or install pkg-config or set"; \
+ echo >&2 "* the QTDIR environment variable to the correct location."; \
+ echo >&2 "*"; \
false; \
fi; \
libpath=$$dir/lib; lib=qt; osdir=""; \
@@ -282,8 +269,8 @@ $(obj)/.tmp_qtcheck:
else \
cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \
libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \
- binpath="\$$(shell pkg-config QtCore --variable=prefix)"; \
- moc="$$binpath/bin/moc"; \
+ moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \
+ [ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \
fi; \
echo "KC_QT_CFLAGS=$$cflags" > $@; \
echo "KC_QT_LIBS=$$libs" >> $@; \
@@ -301,62 +288,30 @@ $(obj)/.tmp_gtkcheck:
if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
touch $@; \
else \
- echo "*"; \
- echo "* GTK+ is present but version >= 2.0.0 is required."; \
- echo "*"; \
+ echo >&2 "*"; \
+ echo >&2 "* GTK+ is present but version >= 2.0.0 is required."; \
+ echo >&2 "*"; \
false; \
fi \
else \
- echo "*"; \
- echo "* Unable to find the GTK+ installation. Please make sure that"; \
- echo "* the GTK+ 2.0 development package is correctly installed..."; \
- echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
- echo "*"; \
+ echo >&2 "*"; \
+ echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; \
+ echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; \
+ echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
+ echo >&2 "*"; \
false; \
fi
endif
-$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c
+$(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c
-$(obj)/kconfig_load.o: $(obj)/lkc_defs.h
+$(obj)/qconf.o: $(obj)/qconf.moc
-$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h
-
-$(obj)/gconf.o: $(obj)/lkc_defs.h
-
-$(obj)/%.moc: $(src)/%.h
+$(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck
$(KC_QT_MOC) -i $< -o $@
-$(obj)/lkc_defs.h: $(src)/lkc_proto.h
- $(Q)sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
-
# Extract gconf menu items for I18N support
$(obj)/gconf.glade.h: $(obj)/gconf.glade
$(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \
$(obj)/gconf.glade
-###
-# The following requires flex/bison/gperf
-# By default we use the _shipped versions, uncomment the following line if
-# you are modifying the flex/bison src.
-# LKC_GENPARSER := 1
-
-ifdef LKC_GENPARSER
-
-$(obj)/zconf.tab.c: $(src)/zconf.y
-$(obj)/lex.zconf.c: $(src)/zconf.l
-$(obj)/zconf.hash.c: $(src)/zconf.gperf
-
-%.tab.c: %.y
- bison -l -b $* -p $(notdir $*) $<
- cp $@ $@_shipped
-
-lex.%.c: %.l
- flex -L -P$(notdir $*) -o$@ $<
- cp $@ $@_shipped
-
-%.hash.c: %.gperf
- gperf < $< > $@
- cp $@ $@_shipped
-
-endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-03 16:19:21 +0000