summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--package/Config.in1
-rw-r--r--package/mpatrol/Config.in10
-rw-r--r--package/mpatrol/mpatrol-uclibc.patch552
-rw-r--r--package/mpatrol/mpatrol-unwindcache.patch208
-rw-r--r--package/mpatrol/mpatrol.mk91
5 files changed, 862 insertions, 0 deletions
diff --git a/package/Config.in b/package/Config.in
index 79835e9ca..0357b3bc2 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -96,6 +96,7 @@ source "package/microwin/Config.in"
source "package/mkdosfs/Config.in"
source "package/module-init-tools/Config.in"
source "package/modutils/Config.in"
+source "package/mpatrol/Config.in"
source "package/mpg123/Config.in"
source "package/mrouted/Config.in"
source "package/mtd/Config.in"
diff --git a/package/mpatrol/Config.in b/package/mpatrol/Config.in
new file mode 100644
index 000000000..12a3ceef4
--- /dev/null
+++ b/package/mpatrol/Config.in
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_MPATROL
+ bool "mpatrol"
+ default n
+ help
+ A debugging tool that attempts to diagnose run-time errors that are
+ caused by the wrong use of dynamically allocated memory. It acts as
+ a malloc() debugger for debugging dynamic memory allocations, although
+ it can also trace and profile calls to malloc() and free() too.
+
+ http://www.cbmamiga.demon.co.uk/mpatrol/
diff --git a/package/mpatrol/mpatrol-uclibc.patch b/package/mpatrol/mpatrol-uclibc.patch
new file mode 100644
index 000000000..aab70a876
--- /dev/null
+++ b/package/mpatrol/mpatrol-uclibc.patch
@@ -0,0 +1,552 @@
+Patches for mpatrol to support uClibc and MIPS full call stack tracing
+by Dan Howell <dahowell@directv.com>
+
+diff -urN mpatrol/src/config.h mpatrol-uclibc/src/config.h
+--- mpatrol/src/config.h 2006-04-27 15:58:21.000000000 -0700
++++ mpatrol-uclibc/src/config.h 2006-05-05 20:32:58.000000000 -0700
+@@ -795,6 +795,10 @@
+ */
+
+ #ifndef MP_INIT_SUPPORT
++/* Note that machine.c currently only implements MP_INIT_SUPPORT for
++ * x86, 68k, 88k, and Sparc architechtures. */
++#if ARCH == ARCH_IX86 || ARCH == ARCH_M68K || \
++ ARCH == ARCH_M88K || ARCH == ARCH_SPARC
+ #if SYSTEM == SYSTEM_DGUX || SYSTEM == SYSTEM_DRSNX || \
+ SYSTEM == SYSTEM_DYNIX || SYSTEM == SYSTEM_LINUX || \
+ SYSTEM == SYSTEM_SOLARIS || SYSTEM == SYSTEM_UNIXWARE
+@@ -809,6 +813,9 @@
+ #else /* SYSTEM */
+ #define MP_INIT_SUPPORT 0
+ #endif /* SYSTEM */
++#else /* ARCH */
++#define MP_INIT_SUPPORT 0
++#endif
+ #endif /* MP_INIT_SUPPORT */
+
+
+diff -urN mpatrol/src/inter.c mpatrol-uclibc/src/inter.c
+--- mpatrol/src/inter.c 2002-01-08 12:13:59.000000000 -0800
++++ mpatrol-uclibc/src/inter.c 2006-05-17 18:02:04.000000000 -0700
+@@ -79,12 +79,24 @@
+
+ #if TARGET == TARGET_UNIX
+ #if SYSTEM == SYSTEM_LINUX
++#ifndef __UCLIBC__
+ /* This contains a pointer to the environment variables for a process. If
+ * it is not set up yet then we must use sbrk() to allocate all memory since
+ * we can't initialise mpatrol until the environment variable can be read.
+ */
+
+ extern char **__environ;
++#else /* __UCLIBC__ */
++/* In uClibc, the dynamic loader calls malloc() and related functions,
++ * and sets __environ before these calls, so we can't use it to determine
++ * if we can initialize mpatrol. Instead, we use __progname, which is set
++ * in __uClibc_main just before before uClibc transfers control to the
++ * application's main() function (and static constructors, if any). Before
++ * this, we must use sbrk() to allocate memory.
++ */
++
++extern const char *__progname;
++#endif /* __UCLIBC__ */
+ #elif SYSTEM == SYSTEM_TRU64
+ /* The exception support library on Tru64 always allocates some memory from
+ * the heap in order to initialise the code address range tables. We need
+@@ -118,7 +130,11 @@
+
+ #if TARGET == TARGET_UNIX
+ #if SYSTEM == SYSTEM_LINUX
++#ifndef __UCLIBC__
+ #define crt_initialised() (__environ)
++#else /* __UCLIBC__ */
++#define crt_initialised() (__progname)
++#endif /* __UCLIBC__ */
+ #elif SYSTEM == SYSTEM_TRU64
+ #define crt_initialised() (__exc_crd_list_head && init_flag)
+ #else /* SYSTEM */
+@@ -306,7 +322,7 @@
+ alloctype t;
+ int c;
+
+- if (memhead.fini || (memhead.astack.size == 0))
++ if (memhead.fini || (memhead.astack.size == 0) || memhead.recur != 1)
+ return;
+ #if MP_FULLSTACK
+ /* Create the address nodes for the current call. This is not necessarily
+@@ -1307,7 +1323,7 @@
+ loginfo v;
+ int j;
+
+- if (!memhead.init || memhead.fini)
++ if (!memhead.init || memhead.fini || memhead.recur != 0)
+ {
+ __mp_memset(p, c, l);
+ return p;
+@@ -1371,7 +1387,7 @@
+ loginfo v;
+ int j;
+
+- if (!memhead.init || memhead.fini)
++ if (!memhead.init || memhead.fini || memhead.recur != 0)
+ if (f == AT_MEMCCPY)
+ {
+ if (r = __mp_memfind(p, l, &c, 1))
+diff -ur mpatrol/src/machine.c mpatrol-uclibc/src/machine.c
+--- mpatrol/src/machine.c 2002-01-08 12:13:59.000000000 -0800
++++ mpatrol-uclibc/src/machine.c 2006-06-07 15:11:20.000000000 -0700
+@@ -217,6 +217,19 @@
+ .end __mp_stackpointer
+
+
++/* Obtain the frame pointer (s8) for the current function.
++ */
++
++ .text
++ .globl __mp_framepointer
++ .ent __mp_framepointer
++__mp_framepointer:
++ .frame $29,0,$31
++ move $2,$30
++ j $31
++ .end __mp_framepointer
++
++
+ /* Obtain the return address for the current function.
+ */
+
+diff -urN mpatrol/src/memory.c mpatrol-uclibc/src/memory.c
+--- mpatrol/src/memory.c 2002-01-08 12:13:59.000000000 -0800
++++ mpatrol-uclibc/src/memory.c 2006-05-12 18:12:39.000000000 -0700
+@@ -47,7 +47,7 @@
+ #endif /* SYSTEM */
+ #include <setjmp.h>
+ #include <signal.h>
+-#if MP_SIGINFO_SUPPORT
++#if MP_SIGINFO_SUPPORT && SYSTEM != SYSTEM_LINUX
+ #include <siginfo.h>
+ #endif /* MP_SIGINFO_SUPPORT */
+ #include <fcntl.h>
+diff -urN mpatrol/src/signals.c mpatrol-uclibc/src/signals.c
+--- mpatrol/src/signals.c 2002-01-08 12:13:59.000000000 -0800
++++ mpatrol-uclibc/src/signals.c 2006-05-12 18:12:19.000000000 -0700
+@@ -36,7 +36,7 @@
+ #include <stdlib.h>
+ #include <signal.h>
+ #if TARGET == TARGET_UNIX
+-#if MP_SIGINFO_SUPPORT
++#if MP_SIGINFO_SUPPORT && SYSTEM != SYSTEM_LINUX
+ #include <siginfo.h>
+ #endif /* MP_SIGINFO_SUPPORT */
+ #elif TARGET == TARGET_WINDOWS
+diff -urN mpatrol/src/stack.c mpatrol-uclibc/src/stack.c
+--- mpatrol/src/stack.c 2002-01-08 12:13:59.000000000 -0800
++++ mpatrol-uclibc/src/stack.c 2006-06-22 15:39:04.000000000 -0700
+@@ -48,7 +48,7 @@
+ #else /* MP_LIBRARYSTACK_SUPPORT */
+ #if TARGET == TARGET_UNIX
+ #include <setjmp.h>
+-#if MP_SIGINFO_SUPPORT
++#if MP_SIGINFO_SUPPORT && SYSTEM != SYSTEM_LINUX
+ #include <siginfo.h>
+ #endif /* MP_SIGINFO_SUPPORT */
+ #if SYSTEM == SYSTEM_DRSNX || SYSTEM == SYSTEM_SOLARIS
+@@ -58,6 +58,17 @@
+ #define R_SP REG_SP
+ #endif /* R_SP */
+ #endif /* ARCH */
++#elif SYSTEM == SYSTEM_LINUX
++#if ARCH == ARCH_MIPS
++#include <linux/unistd.h>
++/* We need the ucontext defined in asm/ucontext.h, but sys/ucontext.h
++ * has a conflicting definition of ucontext. So we'll trick the
++ * preprocessor into letting the include file define a non-conflicting
++ * name. */
++#define ucontext asm_ucontext
++#include <asm/ucontext.h>
++#undef ucontext
++#endif /* ARCH */
+ #endif /* SYSTEM */
+ #endif /* TARGET */
+ #endif /* MP_LIBRARYSTACK_SUPPORT */
+@@ -122,6 +133,15 @@
+ #define SP_OFFSET 2 /* stack pointer offset has been set */
+ #define SP_LOWER 4 /* lower part of stack pointer offset has been set */
+ #define SP_UPPER 8 /* upper part of stack pointer offset has been set */
++#define BR_UNCOND 16 /* unconditional branch needs to be taken */
++#define BR_COND 32 /* conditional branch encountered */
++#define RA_NOFRAME 64 /* no frame - return address is in ra register */
++#define SP_IN_FP 128 /* stack pointer stored in frame pointer (s8) register */
++
++#if SYSTEM == SYSTEM_LINUX
++#define RA_SIGTRAMP 1 /* return address is a signal trampoline */
++#define RA_SIGRETURN 2 /* return address is in the signalled function */
++#endif /* SYSTEM */
+ #endif /* TARGET && ARCH */
+ #endif /* MP_BUILTINSTACK_SUPPORT && MP_LIBRARYSTACK_SUPPORT */
+
+@@ -152,6 +172,13 @@
+ #endif /* SYSTEM */
+ #endif /* SYSTEM */
+ #else /* MP_LIBRARYSTACK_SUPPORT */
++/* On some systems, such as those using uClibc, the signal() function may
++ * call memcpy() or other memory related functions, so we need to guard
++ * against recursion.
++ */
++
++static unsigned char recursive;
++
+ static jmp_buf environment;
+ #if MP_SIGINFO_SUPPORT
+ static struct sigaction bushandler;
+@@ -261,23 +288,41 @@
+ int
+ unwind(frameinfo *f)
+ {
+- long p, s;
+- unsigned long a, i, q;
++ long p, m, s;
++ unsigned long a, i, q, t, b, r;
+ unsigned short l, u;
+
+ s = -1;
+- p = 0;
++ p = m = 0;
+ q = 0xFFFFFFFF;
+ l = u = 0;
+ a = 0;
++ t = b = 0;
+ /* Determine the current stack pointer and return address if we are
+ * initiating call stack traversal.
+ */
+ if (f->ra == 0)
+ {
+ f->sp = __mp_stackpointer();
++ f->fp = __mp_framepointer();
+ f->ra = __mp_returnaddress();
+ }
++#if SYSTEM == SYSTEM_LINUX
++ /* Handle signal frames.
++ */
++ if (f->ra & RA_SIGRETURN)
++ {
++ /* in case of frameless function, get ra and sp from sigcontext */
++ p = ((struct sigcontext *) f->sp)->sc_regs[31];
++ f->fp = ((struct sigcontext *) f->sp)->sc_regs[30];
++ f->sp = ((struct sigcontext *) f->sp)->sc_regs[29];
++ a |= RA_NOFRAME;
++ }
++ f->ra &= ~3;
++#endif
++ /* Save initial code-reading starting point.
++ */
++ r = f->ra;
+ /* Search for the return address offset in the stack frame.
+ */
+ while (!((a & RA_OFFSET) && (a & SP_OFFSET)) && (f->ra < q))
+@@ -294,6 +339,67 @@
+ s = 0;
+ a |= SP_OFFSET;
+ }
++ else if (i == 0x03C0E821)
++ {
++ /* move sp,s8 */
++ a |= SP_IN_FP;
++ }
++ else if ((i >> 28 == 0x1) || (i >> 26 == 0x01))
++ {
++ /* branch */
++ t = f->ra + ((signed short)(i & 0xFFFF) * 4) + 4;
++ if ((i >> 16 == 0x1000) && !(a & BR_COND))
++ {
++ /* unconditional branch, if no conditional branch could
++ branch past this code */
++ b = t;
++ a |= BR_UNCOND;
++ }
++ else
++ {
++ /* conditional branch, ignore if previous conditional branch
++ is further forwards */
++ if ((t > b) && (t > f->ra))
++ {
++ b = t;
++ a |= BR_COND;
++ /* can branch past an unconditional branch */
++ if (b > q)
++ q = 0xFFFFFFFF;
++ }
++ else if (t < r)
++ {
++ /* but if branching backwards, set reverse branch target to
++ lowest address target encountered so far */
++ r = t;
++ /* ensure a loop back */
++ q = 0xFFFFFFFF;
++ }
++ }
++ }
++#if SYSTEM == SYSTEM_LINUX
++ else if (i == 0x0000000c)
++ {
++ /* syscall - check for signal handler trampolines */
++ if (*((unsigned long *) (f->ra - 4)) == 0x24020000 + __NR_sigreturn)
++ {
++ /* li v0,__NR_sigreturn */
++ /* get pointer to sigcontext */
++ f->sp = f->ra + 4;
++ f->ra = ((struct sigcontext *) f->sp)->sc_pc | RA_SIGRETURN;
++ return 1;
++ }
++ else if (*((unsigned long *) (f->ra - 4)) == 0x24020000 + __NR_rt_sigreturn)
++ {
++ /* li v0,__NR_rt_sigreturn */
++ /* get pointer to sigcontext */
++ f->sp = f->ra + 4 +
++ sizeof(struct siginfo) + offsetof(struct asm_ucontext, uc_mcontext);
++ f->ra = ((struct sigcontext *) f->sp)->sc_pc | RA_SIGRETURN;
++ return 1;
++ }
++ }
++#endif
+ else
+ switch (i >> 16)
+ {
+@@ -319,6 +425,10 @@
+ u = i & 0xFFFF;
+ a |= SP_UPPER;
+ break;
++ case 0x8FBE:
++ /* lw s8,##(sp) */
++ m = i & 0xFFFF;
++ break;
+ case 0x8FBF:
+ /* lw ra,##(sp) */
+ p = i & 0xFFFF;
+@@ -326,9 +436,52 @@
+ break;
+ }
+ f->ra += 4;
++ /* Process branch instructions.
++ */
++ if (a & BR_COND)
++ {
++ if (f->ra >= b)
++ {
++ /* reached target of previous conditional branch */
++ a &= ~BR_COND;
++ b = 0;
++ }
++ }
++ else if (a & BR_UNCOND)
++ /* clear branch flag and process instruction in delay slot */
++ a &= ~BR_UNCOND;
++ else if (b != 0)
++ {
++ /* now follow the unconditional branch */
++ if (b < f->ra)
++ {
++ /* avoid infinite loops */
++ q = f->ra - 8;
++ /* go back as far as possible */
++ if (r < b)
++ b = r;
++ }
++ f->ra = b;
++ b = 0;
++ }
+ }
+ if ((s == 0) && ((a & SP_LOWER) || (a & SP_UPPER)))
+ s = (u << 16) | l;
++#if SYSTEM == SYSTEM_LINUX
++ if ((a & RA_NOFRAME) && !(a & RA_OFFSET) &&
++ ((*((unsigned long *) (p - 8)) == 0x0320F809) ||
++ (*((unsigned long *) (p - 8)) >> 16 == 0x0C10)))
++ {
++ /* jalr ra,t9 or jal ## */
++ /* f->sp already set */
++ f->ra = p;
++ return 1;
++ }
++#endif
++ if (a & SP_IN_FP)
++ f->sp = f->fp;
++ if (m > 0)
++ f->fp = ((unsigned long *) f->sp)[m >> 2];
+ if ((s > 0) && (i = ((unsigned long *) f->sp)[p >> 2]) &&
+ ((*((unsigned long *) (i - 8)) == 0x0320F809) ||
+ (*((unsigned long *) (i - 8)) >> 16 == 0x0C10)))
+@@ -338,6 +491,19 @@
+ f->ra = i;
+ return 1;
+ }
++#if SYSTEM == SYSTEM_LINUX
++ else if ((s > 0) && (i != 0) &&
++ (*((unsigned long *) (i + 4)) == 0x0000000c) &&
++ ((*((unsigned long *) i) == 0x24020000 + __NR_sigreturn) ||
++ (*((unsigned long *) i) == 0x24020000 + __NR_rt_sigreturn)))
++ {
++ /* li v0,__NR_sigreturn or __NR_rt_sigreturn ; syscall */
++ /* signal trampoline */
++ f->sp += s;
++ f->ra = i | RA_SIGTRAMP;
++ return 1;
++ }
++#endif
+ f->sp = f->ra = 0;
+ return 0;
+ }
+@@ -573,16 +739,14 @@
+ }
+ #endif /* TARGET */
+ #else /* MP_BUILTINSTACK_SUPPORT && MP_LIBRARYSTACK_SUPPORT */
+-#if (TARGET == TARGET_UNIX && (ARCH == ARCH_IX86 || ARCH == ARCH_M68K || \
+- ARCH == ARCH_M88K || ARCH == ARCH_POWER || ARCH == ARCH_POWERPC || \
+- ARCH == ARCH_SPARC)) || ((TARGET == TARGET_WINDOWS || \
+- TARGET == TARGET_NETWARE) && ARCH == ARCH_IX86)
+- /* This section is not complete in any way for the OS / processor
+- * combinations it supports, as it is intended to be as portable as possible
+- * without writing in assembler. In particular, optimised code is likely
+- * to cause major problems for stack traversal on some platforms.
+- */
+ #if TARGET == TARGET_UNIX
++ /* On some systems, such as those using uClibc, the signal() function may
++ * call memcpy() or other memory related functions, so we need to guard
++ * against recursion here.
++ */
++ if (!recursive)
++ {
++ recursive = 1;
+ #if MP_SIGINFO_SUPPORT
+ i.sa_flags = 0;
+ (void *) i.sa_handler = (void *) stackhandler;
+@@ -597,6 +761,15 @@
+ __mp_newframe(p, p->first);
+ else
+ #endif /* TARGET */
++#if (TARGET == TARGET_UNIX && (ARCH == ARCH_IX86 || ARCH == ARCH_M68K || \
++ ARCH == ARCH_M88K || ARCH == ARCH_POWER || ARCH == ARCH_POWERPC || \
++ ARCH == ARCH_SPARC)) || ((TARGET == TARGET_WINDOWS || \
++ TARGET == TARGET_NETWARE) && ARCH == ARCH_IX86)
++ /* This section is not complete in any way for the OS / processor
++ * combinations it supports, as it is intended to be as portable as possible
++ * without writing in assembler. In particular, optimised code is likely
++ * to cause major problems for stack traversal on some platforms.
++ */
+ {
+ if (p->frame == NULL)
+ if (p->first == NULL)
+@@ -640,32 +813,10 @@
+ r = 1;
+ }
+ }
+-#if TARGET == TARGET_UNIX
+-#if MP_SIGINFO_SUPPORT
+- sigaction(SIGBUS, &bushandler, NULL);
+- sigaction(SIGSEGV, &segvhandler, NULL);
+-#else /* MP_SIGINFO_SUPPORT */
+- signal(SIGBUS, bushandler);
+- signal(SIGSEGV, segvhandler);
+-#endif /* MP_SIGINFO_SUPPORT */
+-#endif /* TARGET */
+ #elif TARGET == TARGET_UNIX && ARCH == ARCH_MIPS
+ /* For the MIPS architecture we perform code reading to determine the
+ * frame pointers and the return addresses.
+ */
+-#if MP_SIGINFO_SUPPORT
+- i.sa_flags = 0;
+- (void *) i.sa_handler = (void *) stackhandler;
+- sigfillset(&i.sa_mask);
+- sigaction(SIGBUS, &i, &bushandler);
+- sigaction(SIGSEGV, &i, &segvhandler);
+-#else /* MP_SIGINFO_SUPPORT */
+- bushandler = signal(SIGBUS, stackhandler);
+- segvhandler = signal(SIGSEGV, stackhandler);
+-#endif /* MP_SIGINFO_SUPPORT */
+- if (setjmp(environment))
+- __mp_newframe(p, p->first);
+- else
+ {
+ if (p->frame == NULL)
+ unwind(&p->next);
+@@ -673,6 +824,10 @@
+ {
+ p->frame = (void *) p->next.sp;
+ p->addr = (void *) (p->next.ra - 8);
++#if SYSTEM == SYSTEM_LINUX
++ if (p->next.ra & (RA_SIGTRAMP|RA_SIGRETURN))
++ p->addr = (void *) (p->next.ra & ~3);
++#endif /* SYSTEM */
+ r = 1;
+ }
+ else
+@@ -681,6 +836,8 @@
+ p->addr = NULL;
+ }
+ }
++#endif /* TARGET && ARCH */
++#if TARGET == TARGET_UNIX
+ #if MP_SIGINFO_SUPPORT
+ sigaction(SIGBUS, &bushandler, NULL);
+ sigaction(SIGSEGV, &segvhandler, NULL);
+@@ -688,7 +845,9 @@
+ signal(SIGBUS, bushandler);
+ signal(SIGSEGV, segvhandler);
+ #endif /* MP_SIGINFO_SUPPORT */
+-#endif /* TARGET && ARCH */
++ recursive = 0;
++ } /* if (!bushandler) */
++#endif /* TARGET */
+ #endif /* MP_BUILTINSTACK_SUPPORT && MP_LIBRARYSTACK_SUPPORT */
+ return r;
+ }
+diff -ur mpatrol/src/stack.h mpatrol-uclibc/src/stack.h
+--- mpatrol/src/stack.h 2002-01-08 12:13:59.000000000 -0800
++++ mpatrol-uclibc/src/stack.h 2006-06-07 15:12:58.000000000 -0700
+@@ -75,6 +75,7 @@
+ typedef struct frameinfo
+ {
+ unsigned int sp; /* stack pointer */
++ unsigned int fp; /* frame pointer (s8) */
+ unsigned int ra; /* return address */
+ }
+ frameinfo;
+diff -urN mpatrol/src/symbol.c mpatrol-uclibc/src/symbol.c
+--- mpatrol/src/symbol.c 2002-01-08 12:13:59.000000000 -0800
++++ mpatrol-uclibc/src/symbol.c 2006-05-24 15:43:04.000000000 -0700
+@@ -1157,7 +1157,7 @@
+ __mp_error(ET_MAX, AT_MAX, NULL, 0, "%s: %s\n", f, m);
+ return 0;
+ }
+- if (n == 0)
++ if (n <= sizeof(asymbol *))
+ {
+ /* If we couldn't find the symbol table then it is likely that the file
+ * has been stripped. However, if the file was dynamically linked then
+@@ -1172,7 +1172,7 @@
+ __mp_error(ET_MAX, AT_MAX, NULL, 0, "%s: %s\n", f, m);
+ return 0;
+ }
+- if (n == 0)
++ if (n <= sizeof(asymbol *))
+ {
+ m = "missing symbol table";
+ if (a != NULL)
+@@ -1893,6 +1893,17 @@
+ l = (dynamiclink *) *((unsigned long *) d->d_un.d_ptr + 1);
+ break;
+ }
++#if ARCH == ARCH_MIPS
++ else if (d->d_tag == DT_MIPS_RLD_MAP)
++ {
++ /* MIPS elf has DT_MIPS_RLD_MAP instead of DT_DEBUG. */
++ if (!d->d_un.d_ptr || !(*(unsigned long **) d->d_un.d_ptr))
++ l = NULL;
++ else
++ l = (dynamiclink *) *((*(unsigned long **) d->d_un.d_ptr) + 1);
++ break;
++ }
++#endif /* ARCH */
+ /* We skip past the first item on the list since it represents the
+ * executable file, but we may wish to record the name of the file
+ * if we haven't already determined it.
diff --git a/package/mpatrol/mpatrol-unwindcache.patch b/package/mpatrol/mpatrol-unwindcache.patch
new file mode 100644
index 000000000..3234d5c81
--- /dev/null
+++ b/package/mpatrol/mpatrol-unwindcache.patch
@@ -0,0 +1,208 @@
+Patch to improve MIPS call stack unwind performance by caching the results
+of code reading.
+by Dan Howell <dahowell@directv.com>
+
+diff -urN mpatrol-uclibc/src/stack.c mpatrol-unwindcache/src/stack.c
+--- mpatrol-uclibc/src/stack.c 2006-06-22 15:39:04.000000000 -0700
++++ mpatrol-unwindcache/src/stack.c 2006-06-22 15:42:20.000000000 -0700
+@@ -68,6 +68,7 @@
+ #define ucontext asm_ucontext
+ #include <asm/ucontext.h>
+ #undef ucontext
++#include "heap.h"
+ #endif /* ARCH */
+ #endif /* SYSTEM */
+ #endif /* TARGET */
+@@ -280,6 +281,136 @@
+
+ #if !MP_BUILTINSTACK_SUPPORT && !MP_LIBRARYSTACK_SUPPORT
+ #if TARGET == TARGET_UNIX && ARCH == ARCH_MIPS
++/* Set up a tree to cache the results of code searching to determine the
++ location of the return address for each code point encountered. */
++
++/* An unwind node belongs to a binary search tree of nodes, ordered by
++ * code address, and contains call stack unwinding details for a given
++ * code address. An internal index node stores details of a single memory
++ * block allocated for unwind node slots.
++ */
++typedef union unwindnode
++{
++ struct
++ {
++ treenode node; /* internal tree node */
++ void *block; /* pointer to block of memory */
++ size_t size; /* size of block of memory */
++ }
++ index;
++ struct
++ {
++ treenode node; /* tree node */
++ long p; /* return address offset in the stack */
++ long m; /* frame pointer offset in stack */
++ long s; /* stack pointer offset from previous frame */
++ unsigned long a; /* flags */
++ }
++ data;
++}
++unwindnode;
++
++/* An unwindhead holds the table of address node slots as well as the
++ * internal list of memory blocks allocated for address node slots.
++ */
++typedef struct unwindhead
++{
++ heaphead heap; /* pointer to heap */
++ slottable table; /* table of address nodes */
++ treeroot itree; /* internal list of memory blocks */
++ treeroot dtree; /* tree for sorting */
++ size_t size; /* memory used by internal blocks */
++ char init; /* initialization flag */
++}
++unwindhead;
++
++static unwindhead unwindcache;
++
++/* Initialise the fields of an unwindhead so that there are no allocated,
++ * freed or free blocks.
++ */
++
++static
++void
++newunwindcache(void)
++{
++ struct { char x; unwindnode y; } z;
++ long n;
++
++ __mp_newheap(&unwindcache.heap);
++ /* Determine the minimum alignment for an unwind node on this
++ * system and force the alignment to be a power of two. This
++ * information is used when initialising the slot table.
++ */
++ n = (char *) &z.y - &z.x;
++ __mp_newslots(&unwindcache.table, sizeof(unwindnode), __mp_poweroftwo(n));
++ __mp_newtree(&unwindcache.itree);
++ __mp_newtree(&unwindcache.dtree);
++ unwindcache.size = 0;
++ unwindcache.init = 1;
++}
++
++
++/* Forget all unwind information.
++ */
++
++static
++void
++deleteunwindcache(void)
++{
++ /* We don't need to explicitly free any memory as this is dealt with
++ * at a lower level by the heap manager.
++ */
++ __mp_deleteheap(&unwindcache.heap);
++ unwindcache.table.free = NULL;
++ unwindcache.table.size = 0;
++ __mp_newtree(&unwindcache.itree);
++ __mp_newtree(&unwindcache.dtree);
++ unwindcache.size = 0;
++ unwindcache.init = 0;
++}
++
++
++/* Allocate a new unwind node.
++ */
++
++static
++unwindnode *
++getunwindnode(void)
++{
++ unwindnode *n;
++ heapnode *p;
++
++ /* If we have no more allocation node slots left then we must allocate
++ * some more memory for them. An extra MP_ALLOCFACTOR pages of memory
++ * should suffice.
++ */
++ if ((n = (unwindnode *) __mp_getslot(&unwindcache.table)) == NULL)
++ {
++ if ((p = __mp_heapalloc(&unwindcache.heap, unwindcache.heap.memory.page * MP_ALLOCFACTOR,
++ unwindcache.table.entalign, 1)) == NULL)
++ return NULL;
++ __mp_initslots(&unwindcache.table, p->block, p->size);
++ n = (unwindnode *) __mp_getslot(&unwindcache.table);
++ __mp_treeinsert(&unwindcache.itree, &n->index.node, (unsigned long) p->block);
++ n->index.block = p->block;
++ n->index.size = p->size;
++ unwindcache.size += p->size;
++ n = (unwindnode *) __mp_getslot(&unwindcache.table);
++ }
++ return n;
++}
++
++/* Search for the unwind node associated with a given address.
++ */
++static
++unwindnode *
++findunwindnode(unsigned long p)
++{
++ return (unwindnode *) __mp_search(unwindcache.dtree.root, p);
++}
++
++
+ /* Determine the stack pointer and return address of the previous stack frame
+ * by performing code reading.
+ */
+@@ -289,8 +420,9 @@
+ unwind(frameinfo *f)
+ {
+ long p, m, s;
+- unsigned long a, i, q, t, b, r;
++ unsigned long a, i, q, t, b, r, k;
+ unsigned short l, u;
++ unwindnode *n = NULL;
+
+ s = -1;
+ p = m = 0;
+@@ -322,7 +454,23 @@
+ #endif
+ /* Save initial code-reading starting point.
+ */
+- r = f->ra;
++ r = k = f->ra;
++ /* Create the cache if not yet created.
++ */
++ if (!unwindcache.init)
++ {
++ newunwindcache();
++ __mp_atexit(deleteunwindcache);
++ }
++ if ((n = findunwindnode(f->ra)) != NULL)
++ {
++ /* We've been here before, so get the cached information.
++ */
++ p = n->data.p;
++ m = n->data.m;
++ s = n->data.s;
++ a = n->data.a;
++ }
+ /* Search for the return address offset in the stack frame.
+ */
+ while (!((a & RA_OFFSET) && (a & SP_OFFSET)) && (f->ra < q))
+@@ -478,6 +626,19 @@
+ return 1;
+ }
+ #endif
++ if (n == NULL)
++ {
++ if ((n = getunwindnode()) != NULL)
++ {
++ /* Cache the information we just got in the tree.
++ */
++ n->data.p = p;
++ n->data.m = m;
++ n->data.s = s;
++ n->data.a = a;
++ __mp_treeinsert(&unwindcache.dtree, &n->data.node, k);
++ }
++ }
+ if (a & SP_IN_FP)
+ f->sp = f->fp;
+ if (m > 0)
diff --git a/package/mpatrol/mpatrol.mk b/package/mpatrol/mpatrol.mk
new file mode 100644
index 000000000..2006df8b0
--- /dev/null
+++ b/package/mpatrol/mpatrol.mk
@@ -0,0 +1,91 @@
+#############################################################
+#
+# mpatrol
+#
+#############################################################
+MPATROL_VER:=1.4.8
+MPATROL_SOURCE:=mpatrol_$(MPATROL_VER).tar.gz
+MPATROL_SITE:=http://www.cbmamiga.demon.co.uk/mpatrol/files
+MPATROL_DIR:=$(BUILD_DIR)/mpatrol
+MPATROL_CAT:=zcat
+MPATROL_BINARY:=mleak
+MPATROL_BUILD_DIR:=$(MPATROL_DIR)/build/unix
+MPATROL_TARGET_BINARY:=usr/bin/mleak
+
+# Pick a symbol library to use. We have a choice of GDB BFD, binutils BFD, or libelf.
+# If one of them is already being built, then use it, otherwise, default to GDB
+ifeq ($(BR2_PACKAGE_GDB),y)
+MPATROL_SYMBOL_LIBS:=-L$(GDB_TARGET_DIR)/bfd -lbfd -L$(GDB_TARGET_DIR)/libiberty -liberty
+MPATROL_SYMBOL_INCS:=-I$(GDB_TARGET_DIR)/bfd -I$(GDB_DIR)/include -DMP_SYMBOL_LIBS=
+MPATROL_SYMBOL_DEPS:=gdb_target
+else
+ifeq ($(BR2_PACKAGE_GCC_TARGET),y)
+MPATROL_SYMBOL_LIBS:=-L$(BINUTILS_DIR2)/bfd -lbfd -L$(BINUTILS_DIR2)/libiberty -liberty
+MPATROL_SYMBOL_INCS:=-I$(BINUTILS_DIR2)/bfd -I$(BINUTILS_DIR)/include -DMP_SYMBOL_LIBS=
+MPATROL_SYMBOL_DEPS:=binutils_target
+else
+ifeq ($(BR2_PACKAGE_LIBELF),y)
+MPATROL_SYMBOL_LIBS:=-L$(LIBELF_DIR)/lib -lelf
+MPATROL_SYMBOL_INCS:=-I$(STAGING_DIR)/usr/include -DFORMAT=FORMAT_ELF32 -DMP_SYMBOL_LIBS=
+MPATROL_SYMBOL_DEPS:=libelf
+else # use GDB by default
+MPATROL_SYMBOL_LIBS:=-L$(GDB_TARGET_DIR)/bfd -lbfd -L$(GDB_TARGET_DIR)/libiberty -liberty
+MPATROL_SYMBOL_INCS:=-I$(GDB_TARGET_DIR)/bfd -I$(GDB_DIR)/include -DMP_SYMBOL_LIBS=
+MPATROL_SYMBOL_DEPS:=gdb_target
+endif
+endif
+endif
+
+$(DL_DIR)/$(MPATROL_SOURCE):
+ $(WGET) -P $(DL_DIR) $(MPATROL_SITE)/$(MPATROL_SOURCE)
+
+mpatrol-source: $(DL_DIR)/$(MPATROL_SOURCE)
+
+$(MPATROL_DIR)/.unpacked: $(DL_DIR)/$(MPATROL_SOURCE)
+ $(MPATROL_CAT) $(DL_DIR)/$(MPATROL_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ toolchain/patch-kernel.sh $(MPATROL_DIR) package/mpatrol mpatrol\*.patch
+ $(SED) '/LD.*MPTOBJS/s,$$, $$(LDLIBS),' $(MPATROL_BUILD_DIR)/Makefile
+ $(SED) '/CFLAGS.*=/s,$$, $$(IFLAGS),' $(MPATROL_BUILD_DIR)/Makefile
+ touch $(MPATROL_DIR)/.unpacked
+
+$(MPATROL_BUILD_DIR)/$(MPATROL_BINARY): $(MPATROL_DIR)/.unpacked
+ $(MAKE) CC=$(TARGET_CROSS)gcc AR=$(TARGET_CROSS)ar LD=$(TARGET_CROSS)gcc \
+ IFLAGS="-g $(MPATROL_SYMBOL_INCS) -DMP_USE_ATEXIT=1 -DMP_SIGINFO_SUPPORT=1" \
+ LDLIBS="$(MPATROL_SYMBOL_LIBS)" -C $(MPATROL_BUILD_DIR) all
+
+$(TARGET_DIR)/$(MPATROL_TARGET_BINARY): $(MPATROL_BUILD_DIR)/$(MPATROL_BINARY)
+ mkdir -p $(TARGET_DIR)/usr/lib
+ (cd $(MPATROL_BUILD_DIR); \
+ cp -dpf lib*.so* $(TARGET_DIR)/usr/lib; \
+ cp -dpf mpatrol mprof mptrace mleak $(TARGET_DIR)/usr/bin)
+ if [ ! -e $(TARGET_DIR)/lib/libpthread.so ] ; then \
+ ln -sf libpthread.so.0 $(TARGET_DIR)/lib/libpthread.so; fi
+ (cd $(MPATROL_DIR); \
+ cp -dpf bin/mp* bin/hexwords $(TARGET_DIR)/usr/bin; \
+ cp -dpf src/mp*.h $(STAGING_DIR)/include; \
+ mkdir -p $(STAGING_DIR)/include/mpatrol; \
+ cp -dpf tools/*.h $(STAGING_DIR)/include/mpatrol)
+ touch $(TARGET_DIR)/$(MPATROL_TARGET_BINARY)
+
+mpatrol: uclibc $(MPATROL_SYMBOL_DEPS) $(TARGET_DIR)/$(MPATROL_TARGET_BINARY)
+
+mpatrol-clean:
+ (cd $(TARGET_DIR)/usr/lib; rm -f libmpatrol* libmpalloc*)
+ (cd $(TARGET_DIR)/usr/bin; \
+ rm -f mpatrol mprof mptrace mleak mpsym mpedit hexwords)
+ (cd $(STAGING_DIR)/include; \
+ rm -rf mpatrol.h mpalloc.h mpdebug.h mpatrol)
+ $(MAKE) -C $(MPATROL_DIR)/build/unix clobber
+
+mpatrol-dirclean:
+ rm -rf $(MPATROL_DIR)
+
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(strip $(BR2_PACKAGE_MPATROL)),y)
+TARGETS+=mpatrol
+endif