blob: 3787ff9a733055b20a68e28590de631f774bc121 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
|
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary (upstream) network interface
allow-hotplug eth0
iface eth0 inet dhcp
post-up ifup uap0
post-down ifdown uap0
# The LAN network interface (not tor-ified)
allow-hotplug eth1
iface eth1 inet static
address 10.23.42.1
netmask 255.255.255.0
network 10.23.42.0
broadcast 10.23.42.255
pre-up ip addr del 10.23.42.1/24 dev eth1 || true
post-up echo 1 > /proc/sys/net/ipv4/ip_forward
post-up /etc/init.d/dnsmasq_lan start
# this must happen after have brought up uap0 because it clears the NAT
# tables
post-up iptables -t nat -A POSTROUTING -s 10.23.42.0/24 -o eth0 -j MASQUERADE
pre-down /etc/init.d/dnsmasq_lan stop
# The magic Tor wireless network
# *NOT* auto; gets configured by eth0 post-*
iface uap0 inet static
address 172.16.23.1
netmask 255.255.255.0
network 172.16.23.0
broadcast 172.16.23.255
pre-up ifconfig uap0 hw ether 00:66:66:66:66:66
pre-up ip addr del 172.16.23.1/24 dev uap0 || true
post-up /etc/init.d/tor start
post-up /etc/init.d/tor reload
post-up /etc/init.d/dnsmasq_wifi start
post-up /etc/init.d/ttdnsd restart
post-up /usr/bin/uaputl sys_cfg_ssid "torproject" || true
post-up /usr/bin/uaputl bss_start || true
post-up /usr/sbin/tor-wireless-firewall.sh || true
post-up /sbin/iptables -t nat -A OUTPUT -p tcp -d 10.192.0.0/10 -j REDIRECT --to-ports 9040
pre-down /usr/bin/uaputl bss_stop || true
pre-down /etc/init.d/dnsmasq_wifi stop
|
