diff options
Diffstat (limited to 'code/qcommon/unzip.c')
| -rw-r--r-- | code/qcommon/unzip.c | 5110 |
1 files changed, 1216 insertions, 3894 deletions
diff --git a/code/qcommon/unzip.c b/code/qcommon/unzip.c index 7669aa9..1d67fda 100644 --- a/code/qcommon/unzip.c +++ b/code/qcommon/unzip.c @@ -1,1063 +1,73 @@ -/***************************************************************************** - * name: unzip.c - * - * desc: IO on .zip files using portions of zlib - * - * $Archive: /MissionPack/code/qcommon/unzip.c $ - * - *****************************************************************************/ - -#include "../qcommon/q_shared.h" -#include "../qcommon/qcommon.h" -#include "unzip.h" - -/* unzip.h -- IO for uncompress .zip files using zlib - Version 0.15 beta, Mar 19th, 1998, - - Copyright (C) 1998 Gilles Vollant - - This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g - WinZip, InfoZip tools and compatible. - Encryption and multi volume ZipFile (span) are not supported. - Old compressions used by old PKZip 1.x are not supported - - THIS IS AN ALPHA VERSION. AT THIS STAGE OF DEVELOPPEMENT, SOMES API OR STRUCTURE - CAN CHANGE IN FUTURE VERSION !! - I WAIT FEEDBACK at mail info@winimage.com - Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution - - Condition of use and distribution are the same than zlib : - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - -*/ -/* for more info about .ZIP format, see - ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip - PkWare has also a specification at : - ftp://ftp.pkware.com/probdesc.zip */ - -/* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.1.3, July 9th, 1998 - - Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler - - This software is provided 'as-is', without any express or implied - warranty. In no event will the authors be held liable for any damages - arising from the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it - freely, subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not - claim that you wrote the original software. If you use this software - in a product, an acknowledgment in the product documentation would be - appreciated but is not required. - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - 3. This notice may not be removed or altered from any source distribution. - - Jean-loup Gailly Mark Adler - jloup@gzip.org madler@alumni.caltech.edu - - - The data format used by the zlib library is described by RFCs (Request for - Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt - (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). -*/ - -/* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-1998 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - - -#ifndef _ZCONF_H -#define _ZCONF_H - -/* Maximum value for memLevel in deflateInit2 */ -#ifndef MAX_MEM_LEVEL -# ifdef MAXSEG_64K -# define MAX_MEM_LEVEL 8 -# else -# define MAX_MEM_LEVEL 9 -# endif -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2. - * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files - * created by gzip. (Files created by minigzip can still be extracted by - * gzip.) - */ -#ifndef MAX_WBITS -# define MAX_WBITS 15 /* 32K LZ77 window */ -#endif - -/* The memory requirements for deflate are (in bytes): - (1 << (windowBits+2)) + (1 << (memLevel+9)) - that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - plus a few kilobytes for small objects. For example, if you want to reduce - the default memory requirements from 256K to 128K, compile with - make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - Of course this will generally degrade compression (there's no free lunch). - - The memory requirements for inflate are (in bytes) 1 << windowBits - that is, 32K for windowBits=15 (default value) plus a few kilobytes - for small objects. -*/ - - /* Type declarations */ - -#ifndef OF /* function prototypes */ -#define OF(args) args -#endif - -typedef unsigned char Byte; /* 8 bits */ -typedef unsigned int uInt; /* 16 bits or more */ -typedef unsigned long uLong; /* 32 bits or more */ -typedef Byte *voidp; - -#ifndef SEEK_SET -# define SEEK_SET 0 /* Seek from beginning of file. */ -# define SEEK_CUR 1 /* Seek from current position. */ -# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ -#endif - -#endif /* _ZCONF_H */ - -#define ZLIB_VERSION "1.1.3" - -/* - The 'zlib' compression library provides in-memory compression and - decompression functions, including integrity checks of the uncompressed - data. This version of the library supports only one compression method - (deflation) but other algorithms will be added later and will have the same - stream interface. - - Compression can be done in a single step if the buffers are large - enough (for example if an input file is mmap'ed), or can be done by - repeated calls of the compression function. In the latter case, the - application must provide more input and/or consume the output - (providing more output space) before each call. - - The library also supports reading and writing files in gzip (.gz) format - with an interface similar to that of stdio. - - The library does not install any signal handler. The decoder checks - the consistency of the compressed data, so the library should never - crash even in case of corrupted input. -*/ - -/* - The application must update next_in and avail_in when avail_in has - dropped to zero. It must update next_out and avail_out when avail_out - has dropped to zero. The application must initialize zalloc, zfree and - opaque before calling the init function. All other fields are set by the - compression library and must not be updated by the application. - - The opaque value provided by the application will be passed as the first - parameter for calls of zalloc and zfree. This can be useful for custom - memory management. The compression library attaches no meaning to the - opaque value. - - zalloc must return Z_NULL if there is not enough memory for the object. - If zlib is used in a multi-threaded application, zalloc and zfree must be - thread safe. - - On 16-bit systems, the functions zalloc and zfree must be able to allocate - exactly 65536 bytes, but will not be required to allocate more than this - if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, - pointers returned by zalloc for objects of exactly 65536 bytes *must* - have their offset normalized to zero. The default allocation function - provided by this library ensures this (see zutil.c). To reduce memory - requirements and avoid any allocation of 64K objects, at the expense of - compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). - - The fields total_in and total_out can be used for statistics or - progress reports. After compression, total_in holds the total size of - the uncompressed data and may be saved for use in the decompressor - (particularly if the decompressor wants to decompress everything in - a single step). -*/ - - /* constants */ - -#define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ -#define Z_SYNC_FLUSH 2 -#define Z_FULL_FLUSH 3 -#define Z_FINISH 4 -/* Allowed flush values; see deflate() below for details */ - -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_NEED_DICT 2 -#define Z_ERRNO (-1) -#define Z_STREAM_ERROR (-2) -#define Z_DATA_ERROR (-3) -#define Z_MEM_ERROR (-4) -#define Z_BUF_ERROR (-5) -#define Z_VERSION_ERROR (-6) -/* Return codes for the compression/decompression functions. Negative - * values are errors, positive values are used for special but normal events. - */ - -#define Z_NO_COMPRESSION 0 -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 -#define Z_DEFAULT_COMPRESSION (-1) -/* compression levels */ - -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 -#define Z_DEFAULT_STRATEGY 0 -/* compression strategy; see deflateInit2() below for details */ - -#define Z_BINARY 0 -#define Z_ASCII 1 -#define Z_UNKNOWN 2 -/* Possible values of the data_type field */ - -#define Z_DEFLATED 8 -/* The deflate compression method (the only one supported in this version) */ - -#define Z_NULL (void *)0 /* for initializing zalloc, zfree, opaque */ - -#define zlib_version zlibVersion() -/* for compatibility with versions < 1.0.2 */ - - /* basic functions */ - -// static const char * zlibVersion OF((void)); -/* The application can compare zlibVersion and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is - not compatible with the zlib.h header file used by the application. - This check is automatically made by deflateInit and inflateInit. - */ - -/* -int deflateInit OF((z_streamp strm, int level)); - - Initializes the internal stream state for compression. The fields - zalloc, zfree and opaque must be initialized before by the caller. - If zalloc and zfree are set to Z_NULL, deflateInit updates them to - use default allocation functions. - - The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: - 1 gives best speed, 9 gives best compression, 0 gives no compression at - all (the input data is simply copied a block at a time). - Z_DEFAULT_COMPRESSION requests a default compromise between speed and - compression (currently equivalent to level 6). - - deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if level is not a valid compression level, - Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible - with the version assumed by the caller (ZLIB_VERSION). - msg is set to null if there is no error message. deflateInit does not - perform any compression: this will be done by deflate(). -*/ - - -// static int deflate OF((z_streamp strm, int flush)); -/* - deflate compresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce some - output latency (reading input without producing any output) except when - forced to flush. - - The detailed semantics are as follows. deflate performs one or both of the - following actions: - - - Compress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in and avail_in are updated and - processing will resume at this point for the next call of deflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. This action is forced if the parameter flush is non zero. - Forcing flush frequently degrades the compression ratio, so this parameter - should be set only when necessary (in interactive applications). - Some output may be provided even if flush is not set. - - Before the call of deflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating avail_in or avail_out accordingly; avail_out - should never be zero before the call. The application can consume the - compressed output when it wants, for example when the output buffer is full - (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK - and with zero avail_out, it must be called again after making room in the - output buffer because there might be more output pending. - - If the parameter flush is set to Z_SYNC_FLUSH, all pending output is - flushed to the output buffer and the output is aligned on a byte boundary, so - that the decompressor can get all input data available so far. (In particular - avail_in is zero after the call if enough output space has been provided - before the call.) Flushing may degrade compression for some compression - algorithms and so it should be used only when necessary. - - If flush is set to Z_FULL_FLUSH, all output is flushed as with - Z_SYNC_FLUSH, and the compression state is reset so that decompression can - restart from this point if previous compressed data has been damaged or if - random access is desired. Using Z_FULL_FLUSH too often can seriously degrade - the compression. - - If deflate returns with avail_out == 0, this function must be called again - with the same value of the flush parameter and more output space (updated - avail_out), until the flush is complete (deflate returns with non-zero - avail_out). - - If the parameter flush is set to Z_FINISH, pending input is processed, - pending output is flushed and deflate returns with Z_STREAM_END if there - was enough output space; if deflate returns with Z_OK, this function must be - called again with Z_FINISH and more output space (updated avail_out) but no - more input data, until it returns with Z_STREAM_END or an error. After - deflate has returned Z_STREAM_END, the only possible operations on the - stream are deflateReset or deflateEnd. - - Z_FINISH can be used immediately after deflateInit if all the compression - is to be done in a single step. In this case, avail_out must be at least - 0.1% larger than avail_in plus 12 bytes. If deflate does not return - Z_STREAM_END, then it must be called again as described above. - - deflate() sets strm->adler to the adler32 checksum of all input read - so (that is, total_in bytes). - - deflate() may update data_type if it can make a good guess about - the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered - binary. This field is only for information purposes and does not affect - the compression algorithm in any manner. - - deflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if all input has been - consumed and all output has been produced (only when flush is set to - Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example - if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible - (for example avail_in or avail_out was zero). -*/ - - -// static int deflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the - stream state was inconsistent, Z_DATA_ERROR if the stream was freed - prematurely (some input or output was discarded). In the error case, - msg may be set but then points to a static string (which must not be - deallocated). -*/ - - -/* -int inflateInit OF((z_streamp strm)); - - Initializes the internal stream state for decompression. The fields - next_in, avail_in, zalloc, zfree and opaque must be initialized before by - the caller. If next_in is not Z_NULL and avail_in is large enough (the exact - value depends on the compression method), inflateInit determines the - compression method from the zlib header and allocates all data structures - accordingly; otherwise the allocation will be deferred to the first call of - inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to - use default allocation functions. - - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_VERSION_ERROR if the zlib library version is incompatible with the - version assumed by the caller. msg is set to null if there is no error - message. inflateInit does not perform any decompression apart from reading - the zlib header if present: this will be done by inflate(). (So next_in and - avail_in may be modified, but next_out and avail_out are unchanged.) -*/ - - -static int inflate OF((z_streamp strm, int flush)); -/* - inflate decompresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may some - introduce some output latency (reading input without producing any output) - except when forced to flush. - - The detailed semantics are as follows. inflate performs one or both of the - following actions: - - - Decompress more input starting at next_in and update next_in and avail_in - accordingly. If not all input can be processed (because there is not - enough room in the output buffer), next_in is updated and processing - will resume at this point for the next call of inflate(). - - - Provide more output starting at next_out and update next_out and avail_out - accordingly. inflate() provides as much output as possible, until there - is no more input data or no more space in the output buffer (see below - about the flush parameter). - - Before the call of inflate(), the application should ensure that at least - one of the actions is possible, by providing more input and/or consuming - more output, and updating the next_* and avail_* values accordingly. - The application can consume the uncompressed output when it wants, for - example when the output buffer is full (avail_out == 0), or after each - call of inflate(). If inflate returns Z_OK and with zero avail_out, it - must be called again after making room in the output buffer because there - might be more output pending. - - If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much - output as possible to the output buffer. The flushing behavior of inflate is - not specified for values of the flush parameter other than Z_SYNC_FLUSH - and Z_FINISH, but the current implementation actually flushes as much output - as possible anyway. - - inflate() should normally be called until it returns Z_STREAM_END or an - error. However if all decompression is to be performed in a single step - (a single call of inflate), the parameter flush should be set to - Z_FINISH. In this case all pending input is processed and all pending - output is flushed; avail_out must be large enough to hold all the - uncompressed data. (The size of the uncompressed data may have been saved - by the compressor for this purpose.) The next operation on this stream must - be inflateEnd to deallocate the decompression state. The use of Z_FINISH - is never required, but can be used to inform inflate that a faster routine - may be used for the single inflate() call. - - If a preset dictionary is needed at this point (see inflateSetDictionary - below), inflate sets strm-adler to the adler32 checksum of the - dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise - it sets strm->adler to the adler32 checksum of all output produced - so (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or - an error code as described below. At the end of the stream, inflate() - checks that its computed adler32 checksum is equal to that saved by the - compressor and returns Z_STREAM_END only if the checksum is correct. - - inflate() returns Z_OK if some progress has been made (more input processed - or more output produced), Z_STREAM_END if the end of the compressed data has - been reached and all uncompressed output has been produced, Z_NEED_DICT if a - preset dictionary is needed at this point, Z_DATA_ERROR if the input data was - corrupted (input stream not conforming to the zlib format or incorrect - adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent - (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if no progress is possible or if there was not - enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR - case, the application may then call inflateSync to look for a good - compression block. -*/ +/* unzip.c -- IO for uncompress .zip files using zlib + Version 1.01e, February 12th, 2005 + Copyright (C) 1998-2005 Gilles Vollant -static int inflateEnd OF((z_streamp strm)); -/* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any - pending output. - - inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state - was inconsistent. In the error case, msg may be set but then points to a - static string (which must not be deallocated). + Read unzip.h for more info */ - /* Advanced functions */ - -/* - The following functions are needed only in some special applications. -*/ - -/* -int deflateInit2 OF((z_streamp strm, - int level, - int method, - int windowBits, - int memLevel, - int strategy)); - - This is another version of deflateInit with more compression options. The - fields next_in, zalloc, zfree and opaque must be initialized before by - the caller. - - The method parameter is the compression method. It must be Z_DEFLATED in - this version of the library. - - The windowBits parameter is the base two logarithm of the window size - (the size of the history buffer). It should be in the range 8..15 for this - version of the library. Larger values of this parameter result in better - compression at the expense of memory usage. The default value is 15 if - deflateInit is used instead. - - The memLevel parameter specifies how much memory should be allocated - for the internal compression state. memLevel=1 uses minimum memory but - is slow and reduces compression ratio; memLevel=9 uses maximum memory - for optimal speed. The default value is 8. See zconf.h for total memory - usage as a function of windowBits and memLevel. - - The strategy parameter is used to tune the compression algorithm. Use the - value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a - filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no - string match). Filtered data consists mostly of small values with a - somewhat random distribution. In this case, the compression algorithm is - tuned to compress them better. The effect of Z_FILTERED is to force more - Huffman coding and less string matching; it is somewhat intermediate - between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects - the compression ratio but not the correctness of the compressed output even - if it is not set appropriately. - - deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid - method). msg is set to null if there is no error message. deflateInit2 does - not perform any compression: this will be done by deflate(). -*/ - -/* -static int deflateSetDictionary OF((z_streamp strm, - const Byte *dictionary, - uInt dictLength)); +/* Decryption code comes from crypt.c by Info-ZIP but has been greatly reduced in terms of +compatibility with older software. The following is from the original crypt.c. Code +woven in by Terry Thorsen 1/2003. */ /* - Initializes the compression dictionary from the given byte sequence - without producing any compressed output. This function must be called - immediately after deflateInit, deflateInit2 or deflateReset, before any - call of deflate. The compressor and decompressor must use exactly the same - dictionary (see inflateSetDictionary). - - The dictionary should consist of strings (byte sequences) that are likely - to be encountered later in the data to be compressed, with the most commonly - used strings preferably put towards the end of the dictionary. Using a - dictionary is most useful when the data to be compressed is short and can be - predicted with good accuracy; the data can then be compressed better than - with the default empty dictionary. - - Depending on the size of the compression data structures selected by - deflateInit or deflateInit2, a part of the dictionary may in effect be - discarded, for example if the dictionary is larger than the window size in - deflate or deflate2. Thus the strings most likely to be useful should be - put at the end of the dictionary, not at the front. - - Upon return of this function, strm->adler is set to the Adler32 value - of the dictionary; the decompressor may later use this value to determine - which dictionary has been used by the compressor. (The Adler32 value - applies to the whole dictionary even if only a subset of the dictionary is - actually used by the compressor.) - - deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent (for example if deflate has already been called for this stream - or if the compression method is bsort). deflateSetDictionary does not - perform any compression: this will be done by deflate(). -*/ + Copyright (c) 1990-2000 Info-ZIP. All rights reserved. -/* -static int deflateCopy OF((z_streamp dest, - z_streamp source)); + See the accompanying file LICENSE, version 2000-Apr-09 or later + (the contents of which are also included in zip.h) for terms of use. + If, for some reason, all these files are missing, the Info-ZIP license + also may be found at: ftp://ftp.info-zip.org/pub/infozip/license.html */ /* - Sets the destination stream as a complete copy of the source stream. - - This function can be useful when several compression strategies will be - tried, for example when there are several ways of pre-processing the input - data with a filter. The streams that will be discarded should then be freed - by calling deflateEnd. Note that deflateCopy duplicates the internal - compression state which can be quite large, so this strategy is slow and - can consume lots of memory. - - deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_STREAM_ERROR if the source stream state was inconsistent - (such as zalloc being NULL). msg is left unchanged in both source and - destination. -*/ + crypt.c (full version) by Info-ZIP. Last revised: [see crypt.h] -// static int deflateReset OF((z_streamp strm)); -/* - This function is equivalent to deflateEnd followed by deflateInit, - but does not free and reallocate all the internal compression state. - The stream will keep the same compression level and any other attributes - that may have been set by deflateInit2. - - deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -*/ - -/* -static int deflateParams OF((z_streamp strm, - int level, - int strategy)); -*/ -/* - Dynamically update the compression level and compression strategy. The - interpretation of level and strategy is as in deflateInit2. This can be - used to switch between compression and straight copy of the input data, or - to switch to a different kind of input data requiring a different - strategy. If the compression level is changed, the input available so far - is compressed with the old level (and may be flushed); the new level will - take effect only at the next call of deflate(). - - Before the call of deflateParams, the stream state must be set as for - a call of deflate(), since the currently available input may have to - be compressed and flushed. In particular, strm->avail_out must be non-zero. - - deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source - stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR - if strm->avail_out was zero. -*/ - -/* -int inflateInit2 OF((z_streamp strm, - int windowBits)); - - This is another version of inflateInit with an extra parameter. The - fields next_in, avail_in, zalloc, zfree and opaque must be initialized - before by the caller. - - The windowBits parameter is the base two logarithm of the maximum window - size (the size of the history buffer). It should be in the range 8..15 for - this version of the library. The default value is 15 if inflateInit is used - instead. If a compressed stream with a larger window size is given as - input, inflate() will return with the error code Z_DATA_ERROR instead of - trying to allocate a larger window. - - inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative - memLevel). msg is set to null if there is no error message. inflateInit2 - does not perform any decompression apart from reading the zlib header if - present: this will be done by inflate(). (So next_in and avail_in may be - modified, but next_out and avail_out are unchanged.) -*/ - -/* -static int inflateSetDictionary OF((z_streamp strm, - const Byte *dictionary, - uInt dictLength)); -*/ -/* - Initializes the decompression dictionary from the given uncompressed byte - sequence. This function must be called immediately after a call of inflate - if this call returned Z_NEED_DICT. The dictionary chosen by the compressor - can be determined from the Adler32 value returned by this call of - inflate. The compressor and decompressor must use exactly the same - dictionary (see deflateSetDictionary). - - inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state is - inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the - expected one (incorrect Adler32 value). inflateSetDictionary does not - perform any decompression: this will be done by subsequent calls of - inflate(). -*/ - -// static int inflateSync OF((z_streamp strm)); -/* - Skips invalid compressed data until a full flush point (see above the - description of deflate with Z_FULL_FLUSH) can be found, or until all - available input is skipped. No output is provided. - - inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR - if no more input was provided, Z_DATA_ERROR if no flush point has been found, - or Z_STREAM_ERROR if the stream structure was inconsistent. In the success - case, the application may save the current current value of total_in which - indicates where valid compressed data was found. In the error case, the - application may repeatedly call inflateSync, providing more input each time, - until success or end of the input data. -*/ - -static int inflateReset OF((z_streamp strm)); -/* - This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. - The stream will keep attributes that may have been set by inflateInit2. - - inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source - stream state was inconsistent (such as zalloc or state being NULL). -*/ - - - /* utility functions */ - -/* - The following utility functions are implemented on top of the - basic stream-oriented functions. To simplify the interface, some - default options are assumed (compression level and memory usage, - standard memory allocation functions). The source code of these - utility functions can easily be modified if you need special options. -*/ - -/* -static int compress OF((Byte *dest, uLong *destLen, - const Byte *source, uLong sourceLen)); -*/ -/* - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be at least 0.1% larger than - sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the - compressed buffer. - This function can be used to compress a whole file at once if the - input file is mmap'ed. - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. -*/ - -/* -static int compress2 OF((Byte *dest, uLong *destLen, - const Byte *source, uLong sourceLen, - int level)); -*/ -/* - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least 0.1% larger than sourceLen plus - 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ - -/* -static int uncompress OF((Byte *dest, uLong *destLen, - const Byte *source, uLong sourceLen)); -*/ -/* - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be large enough to hold the - entire uncompressed data. (The size of the uncompressed data must have - been saved previously by the compressor and transmitted to the decompressor - by some mechanism outside the scope of this compression library.) - Upon exit, destLen is the actual size of the compressed buffer. - This function can be used to decompress a whole file at once if the - input file is mmap'ed. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted. -*/ - - -typedef voidp gzFile; - -gzFile gzopen OF((const char *path, const char *mode)); -/* - Opens a gzip (.gz) file for reading or writing. The mode parameter - is as in fopen ("rb" or "wb") but can also include a compression level - ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for - Huffman only compression as in "wb1h". (See the description - of deflateInit2 for more information about the strategy parameter.) - - gzopen can be used to read a file which is not in gzip format; in this - case gzread will directly read from the file without decompression. - - gzopen returns NULL if the file could not be opened or if there was - insufficient memory to allocate the (de)compression state; errno - can be checked to distinguish the two cases (if errno is zero, the - zlib error is Z_MEM_ERROR). */ - -gzFile gzdopen OF((int fd, const char *mode)); -/* - gzdopen() associates a gzFile with the file descriptor fd. File - descriptors are obtained from calls like open, dup, creat, pipe or - fileno (in the file has been previously opened with fopen). - The mode parameter is as in gzopen. - The next call of gzclose on the returned gzFile will also close the - file descriptor fd, just like fclose(fdopen(fd), mode) closes the file - descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). - gzdopen returns NULL if there was insufficient memory to allocate - the (de)compression state. -*/ - -int gzsetparams OF((gzFile file, int level, int strategy)); -/* - Dynamically update the compression level or strategy. See the description - of deflateInit2 for the meaning of these parameters. - gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not - opened for writing. -*/ - -int gzread OF((gzFile file, voidp buf, unsigned len)); -/* - Reads the given number of uncompressed bytes from the compressed file. - If the input file was not in gzip format, gzread copies the given number - of bytes into the buffer. - gzread returns the number of uncompressed bytes actually read (0 for - end of file, -1 for error). */ - -int gzwrite OF((gzFile file, - const voidp buf, unsigned len)); -/* - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of uncompressed bytes actually written - (0 in case of error). -*/ - -int QDECL gzprintf OF((gzFile file, const char *format, ...)); -/* - Converts, formats, and writes the args to the compressed file under - control of the format string, as in fprintf. gzprintf returns the number of - uncompressed bytes actually written (0 in case of error). -*/ - -int gzputs OF((gzFile file, const char *s)); -/* - Writes the given null-terminated string to the compressed file, excluding - the terminating null character. - gzputs returns the number of characters written, or -1 in case of error. -*/ - -char * gzgets OF((gzFile file, char *buf, int len)); -/* - Reads bytes from the compressed file until len-1 characters are read, or - a newline character is read and transferred to buf, or an end-of-file - condition is encountered. The string is then terminated with a null - character. - gzgets returns buf, or Z_NULL in case of error. -*/ - -int gzputc OF((gzFile file, int c)); -/* - Writes c, converted to an unsigned char, into the compressed file. - gzputc returns the value that was written, or -1 in case of error. -*/ - -int gzgetc OF((gzFile file)); -/* - Reads one byte from the compressed file. gzgetc returns this byte - or -1 in case of end of file or error. -*/ - -int gzflush OF((gzFile file, int flush)); -/* - Flushes all pending output into the compressed file. The parameter - flush is as in the deflate() function. The return value is the zlib - error number (see function gzerror below). gzflush returns Z_OK if - the flush parameter is Z_FINISH and all output could be flushed. - gzflush should be called only when strictly necessary because it can - degrade compression. -*/ - -long gzseek OF((gzFile file, - long offset, int whence)); -/* - Sets the starting position for the next gzread or gzwrite on the - given compressed file. The offset represents a number of bytes in the - uncompressed data stream. The whence parameter is defined as in lseek(2); - the value SEEK_END is not supported. - If the file is opened for reading, this function is emulated but can be - extremely slow. If the file is opened for writing, only forward seeks are - supported; gzseek then compresses a sequence of zeroes up to the new - starting position. - - gzseek returns the resulting offset location as measured in bytes from - the beginning of the uncompressed stream, or -1 in case of error, in - particular if the file is opened for writing and the new starting position - would be before the current position. -*/ - -int gzrewind OF((gzFile file)); -/* - Rewinds the given file. This function is supported only for reading. - - gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) -*/ - -long gztell OF((gzFile file)); -/* - Returns the starting position for the next gzread or gzwrite on the - given compressed file. This position represents a number of bytes in the - uncompressed data stream. - - gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) -*/ - -int gzeof OF((gzFile file)); -/* - Returns 1 when EOF has previously been detected reading the given - input stream, otherwise zero. -*/ - -int gzclose OF((gzFile file)); -/* - Flushes all pending output if necessary, closes the compressed file - and deallocates all the (de)compression state. The return value is the zlib - error number (see function gzerror below). -*/ - -// static const char * gzerror OF((gzFile file, int *errnum)); -/* - Returns the error message for the last error which occurred on the - given compressed file. errnum is set to zlib error number. If an - error occurred in the file system and not in the compression library, - errnum is set to Z_ERRNO and the application may consult errno - to get the exact error code. -*/ - - /* checksum functions */ - -/* - These functions are not related to compression but are exported - anyway because they might be useful in applications using the - compression library. -*/ - -static uLong adler32 OF((uLong adler, const Byte *buf, uInt len)); + The encryption/decryption parts of this source code (as opposed to the + non-echoing password parts) were originally written in Europe. The + whole source package can be freely distributed, including from the USA. + (Prior to January 2000, re-export from the US was a violation of US law.) + */ /* - Update a running Adler-32 checksum with the bytes buf[0..len-1] and - return the updated checksum. If buf is NULL, this function returns - the required initial value for the checksum. - An Adler-32 checksum is almost as reliable as a CRC32 but can be computed - much faster. Usage example: - - uLong adler = adler32(0L, Z_NULL, 0); - - while (read_buffer(buffer, length) != EOF) { - adler = adler32(adler, buffer, length); - } - if (adler != original_adler) error(); -*/ - - /* various hacks, don't look :) */ - -/* deflateInit and inflateInit are macros to allow checking the zlib version - * and the compiler's view of z_stream: + This encryption code is a direct transcription of the algorithm from + Roger Schlafly, described by Phil Katz in the file appnote.txt. This + file (appnote.txt) is distributed with the PKZIP program (even in the + version without encryption capabilities). */ -/* -static int deflateInit_ OF((z_streamp strm, int level, - const char *version, int stream_size)); -static int inflateInit_ OF((z_streamp strm, - const char *version, int stream_size)); -static int deflateInit2_ OF((z_streamp strm, int level, int method, - int windowBits, int memLevel, - int strategy, const char *version, - int stream_size)); -*/ -static int inflateInit2_ OF((z_streamp strm, int windowBits, - const char *version, int stream_size)); - -#define deflateInit(strm, level) \ - deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit(strm) \ - inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) -#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ - deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ - (strategy), ZLIB_VERSION, sizeof(z_stream)) -#define inflateInit2(strm, windowBits) \ - inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) -// static const char * zError OF((int err)); -// static int inflateSyncPoint OF((z_streamp z)); -// static const uLong * get_crc_table OF((void)); - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -// static const char *z_errmsg[10]; /* indexed by 2-zlib_error */ -/* (size given to avoid silly warnings with Visual C++) */ - -#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] - -#define ERR_RETURN(strm,err) \ - return (strm->msg = (char*)ERR_MSG(err), (err)) -/* To be used only when the state is known to be valid */ - - /* common constants */ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include "zlib.h" +#include "unzip.h" -#ifndef DEF_WBITS -# define DEF_WBITS MAX_WBITS +#ifdef STDC +# include <stddef.h> +# include <string.h> +# include <stdlib.h> #endif -/* default windowBits for decompression. MAX_WBITS is for compression only */ - -#if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 +#ifdef NO_ERRNO_H + extern int errno; #else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL +# include <errno.h> #endif -/* default memLevel */ - -#define STORED_BLOCK 0 -#define STATIC_TREES 1 -#define DYN_TREES 2 -/* The three kinds of block type */ - -#define MIN_MATCH 3 -#define MAX_MATCH 258 -/* The minimum and maximum match lengths */ - -#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ - /* target dependencies */ - - /* Common defaults */ - -#ifndef OS_CODE -# define OS_CODE 0x03 /* assume Unix */ -#endif -#ifndef F_OPEN -# define F_OPEN(name, mode) fopen((name), (mode)) +#ifndef local +# define local static #endif +/* compile with -Dlocal if your debugger can't find static symbols */ - /* functions */ - -#ifdef HAVE_STRERROR - extern char *strerror OF((int)); -# define zstrerror(errnum) strerror(errnum) -#else -# define zstrerror(errnum) "" -#endif - -#define zmemcpy Com_Memcpy -#define zmemcmp memcmp -#define zmemzero(dest, len) Com_Memset(dest, 0, len) - -/* Diagnostic functions */ -#ifdef _ZIP_DEBUG_ - int z_verbose = 0; -# define Assert(cond,msg) assert(cond); - //{if(!(cond)) Sys_Error(msg);} -# define Trace(x) {if (z_verbose>=0) Sys_Error x ;} -# define Tracev(x) {if (z_verbose>0) Sys_Error x ;} -# define Tracevv(x) {if (z_verbose>1) Sys_Error x ;} -# define Tracec(c,x) {if (z_verbose>0 && (c)) Sys_Error x ;} -# define Tracecv(c,x) {if (z_verbose>1 && (c)) Sys_Error x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - -typedef uLong (*check_func) OF((uLong check, const Byte *buf, uInt len)); -static voidp zcalloc OF((voidp opaque, unsigned items, unsigned size)); -static void zcfree OF((voidp opaque, voidp ptr)); - -#define ZALLOC(strm, items, size) \ - (*((strm)->zalloc))((strm)->opaque, (items), (size)) -#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidp)(addr)) -#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} - - -#if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES) && \ - !defined(CASESENSITIVITYDEFAULT_NO) -#define CASESENSITIVITYDEFAULT_NO +#ifndef CASESENSITIVITYDEFAULT_NO +# if !defined(unix) && !defined(CASESENSITIVITYDEFAULT_YES) +# define CASESENSITIVITYDEFAULT_NO +# endif #endif #ifndef UNZ_BUFSIZE -#define UNZ_BUFSIZE (65536) +#define UNZ_BUFSIZE (16384) #endif #ifndef UNZ_MAXFILENAMEINZIP @@ -1065,10 +75,10 @@ static void zcfree OF((voidp opaque, voidp ptr)); #endif #ifndef ALLOC -# define ALLOC(size) (Z_Malloc(size)) +# define ALLOC(size) (malloc(size)) #endif #ifndef TRYFREE -# define TRYFREE(p) {if (p) Z_Free(p);} +# define TRYFREE(p) {if (p) free(p);} #endif #define SIZECENTRALDIRITEM (0x2e) @@ -1076,17 +86,95 @@ static void zcfree OF((voidp opaque, voidp ptr)); + +const char unz_copyright[] = + " unzip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll"; + +/* unz_file_info_interntal contain internal info about a file in zipfile*/ +typedef struct unz_file_info_internal_s +{ + uLong offset_curfile;/* relative offset of local header 4 bytes */ +} unz_file_info_internal; + + +/* file_in_zip_read_info_s contain internal information about a file in zipfile, + when reading and decompress it */ +typedef struct +{ + char *read_buffer; /* internal buffer for compressed data */ + z_stream stream; /* zLib stream structure for inflate */ + + uLong pos_in_zipfile; /* position in byte on the zipfile, for fseek*/ + uLong stream_initialised; /* flag set if stream structure is initialised*/ + + uLong offset_local_extrafield;/* offset of the local extra field */ + uInt size_local_extrafield;/* size of the local extra field */ + uLong pos_local_extrafield; /* position in the local extra field in read*/ + + uLong crc32; /* crc32 of all data uncompressed */ + uLong crc32_wait; /* crc32 we must obtain after decompress all */ + uLong rest_read_compressed; /* number of byte to be decompressed */ + uLong rest_read_uncompressed;/*number of byte to be obtained after decomp*/ + zlib_filefunc_def z_filefunc; + voidpf filestream; /* io structore of the zipfile */ + uLong compression_method; /* compression method (0==store) */ + uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + int raw; +} file_in_zip_read_info_s; + + +/* unz_s contain internal information about the zipfile +*/ +typedef struct +{ + zlib_filefunc_def z_filefunc; + voidpf filestream; /* io structore of the zipfile */ + unz_global_info gi; /* public global information */ + uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/ + uLong num_file; /* number of the current file in the zipfile*/ + uLong pos_in_central_dir; /* pos of the current file in the central dir*/ + uLong current_file_ok; /* flag about the usability of the current file*/ + uLong central_pos; /* position of the beginning of the central dir*/ + + uLong size_central_dir; /* size of the central directory */ + uLong offset_central_dir; /* offset of start of central directory with + respect to the starting disk number */ + + unz_file_info cur_file_info; /* public info about the current file in zip*/ + unz_file_info_internal cur_file_info_internal; /* private info about it*/ + file_in_zip_read_info_s* pfile_in_zip_read; /* structure about the current + file if we are decompressing it */ + int encrypted; +# ifndef NOUNCRYPT + unsigned long keys[3]; /* keys defining the pseudo-random sequence */ + const unsigned long* pcrc_32_tab; +# endif +} unz_s; + + +#ifndef NOUNCRYPT +#include "crypt.h" +#endif + /* =========================================================================== Read a byte from a gz_stream; update next_in and avail_in. Return EOF for end of file. IN assertion: the stream s has been sucessfully opened for reading. */ -/* -static int unzlocal_getByte(FILE *fin,int *pi) + +local int unzlocal_getByte OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + int *pi)); + +local int unzlocal_getByte(pzlib_filefunc_def,filestream,pi) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + int *pi; { unsigned char c; - int err = fread(&c, 1, 1, fin); + int err = (int)ZREAD(*pzlib_filefunc_def,filestream,&c,1); if (err==1) { *pi = (int)c; @@ -1094,106 +182,107 @@ static int unzlocal_getByte(FILE *fin,int *pi) } else { - if (ferror(fin)) + if (ZERROR(*pzlib_filefunc_def,filestream)) return UNZ_ERRNO; else return UNZ_EOF; } } -*/ + /* =========================================================================== - Reads a long in LSB order from the given gz_stream. Sets + Reads a long in LSB order from the given gz_stream. Sets */ -static int unzlocal_getShort (FILE* fin, uLong *pX) -{ - short v; - - size_t size; - size = fread( &v, sizeof(v), 1, fin ); - - *pX = LittleShort( v); - return UNZ_OK; +local int unzlocal_getShort OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); -/* +local int unzlocal_getShort (pzlib_filefunc_def,filestream,pX) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + uLong *pX; +{ uLong x ; int i; int err; - err = unzlocal_getByte(fin,&i); + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); x = (uLong)i; - + if (err==UNZ_OK) - err = unzlocal_getByte(fin,&i); + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); x += ((uLong)i)<<8; - + if (err==UNZ_OK) *pX = x; else *pX = 0; return err; -*/ } -static int unzlocal_getLong (FILE *fin, uLong *pX) -{ - int v; - - size_t size; - size = fread( &v, sizeof(v), 1, fin ); - - *pX = LittleLong( v); - return UNZ_OK; +local int unzlocal_getLong OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream, + uLong *pX)); -/* +local int unzlocal_getLong (pzlib_filefunc_def,filestream,pX) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; + uLong *pX; +{ uLong x ; int i; int err; - err = unzlocal_getByte(fin,&i); + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); x = (uLong)i; - + if (err==UNZ_OK) - err = unzlocal_getByte(fin,&i); + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); x += ((uLong)i)<<8; if (err==UNZ_OK) - err = unzlocal_getByte(fin,&i); + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); x += ((uLong)i)<<16; if (err==UNZ_OK) - err = unzlocal_getByte(fin,&i); + err = unzlocal_getByte(pzlib_filefunc_def,filestream,&i); x += ((uLong)i)<<24; - + if (err==UNZ_OK) *pX = x; else *pX = 0; return err; -*/ } +local int strcmpcasenosensitive_internal OF(( + const char* fileName1, + const char* fileName2)); /* My own strcmpi / strcasecmp */ -static int strcmpcasenosensitive_internal (const char* fileName1,const char* fileName2) +local int strcmpcasenosensitive_internal (fileName1,fileName2) + const char* fileName1; + const char* fileName2; { - for (;;) - { - char c1=*(fileName1++); - char c2=*(fileName2++); - if ((c1>='a') && (c1<='z')) - c1 -= 0x20; - if ((c2>='a') && (c2<='z')) - c2 -= 0x20; - if (c1=='\0') - return ((c2=='\0') ? 0 : -1); - if (c2=='\0') - return 1; - if (c1<c2) - return -1; - if (c1>c2) - return 1; - } + for (;;) + { + char c1=*(fileName1++); + char c2=*(fileName2++); + if ((c1>='a') && (c1<='z')) + c1 -= 0x20; + if ((c2>='a') && (c2<='z')) + c2 -= 0x20; + if (c1=='\0') + return ((c2=='\0') ? 0 : -1); + if (c2=='\0') + return 1; + if (c1<c2) + return -1; + if (c1>c2) + return 1; + } } @@ -1207,7 +296,7 @@ static int strcmpcasenosensitive_internal (const char* fileName1,const char* fil #define STRCMPCASENOSENTIVEFUNCTION strcmpcasenosensitive_internal #endif -/* +/* Compare two filename (fileName1,fileName2). If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp) If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi @@ -1216,211 +305,226 @@ static int strcmpcasenosensitive_internal (const char* fileName1,const char* fil (like 1 on Unix, 2 on Windows) */ -extern int unzStringFileNameCompare (const char* fileName1,const char* fileName2,int iCaseSensitivity) +extern int ZEXPORT unzStringFileNameCompare (fileName1,fileName2,iCaseSensitivity) + const char* fileName1; + const char* fileName2; + int iCaseSensitivity; { - if (iCaseSensitivity==0) - iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE; + if (iCaseSensitivity==0) + iCaseSensitivity=CASESENSITIVITYDEFAULTVALUE; - if (iCaseSensitivity==1) - return strcmp(fileName1,fileName2); + if (iCaseSensitivity==1) + return strcmp(fileName1,fileName2); - return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2); -} + return STRCMPCASENOSENTIVEFUNCTION(fileName1,fileName2); +} +#ifndef BUFREADCOMMENT #define BUFREADCOMMENT (0x400) +#endif /* Locate the Central directory of a zipfile (at the end, just before the global comment) */ -extern uLong unzlocal_SearchCentralDir(FILE *fin) -{ - unsigned char* buf; - uLong uSizeFile; - uLong uBackRead; - uLong uMaxBack=0xffff; /* maximum size of global comment */ - uLong uPosFound=0; - - if (fseek(fin,0,SEEK_END) != 0) - return 0; - - - uSizeFile = ftell( fin ); - - if (uMaxBack>uSizeFile) - uMaxBack = uSizeFile; - - buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); - if (buf==NULL) - return 0; - - uBackRead = 4; - while (uBackRead<uMaxBack) - { - uLong uReadSize,uReadPos ; - int i; - if (uBackRead+BUFREADCOMMENT>uMaxBack) - uBackRead = uMaxBack; - else - uBackRead+=BUFREADCOMMENT; - uReadPos = uSizeFile-uBackRead ; - - uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? - (BUFREADCOMMENT+4) : (uSizeFile-uReadPos); - if (fseek(fin,uReadPos,SEEK_SET)!=0) - break; - - if (fread(buf,(uInt)uReadSize,1,fin)!=1) - break; - - for (i=(int)uReadSize-3; (i--)>0;) - if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && - ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) - { - uPosFound = uReadPos+i; - break; - } - - if (uPosFound!=0) - break; - } - TRYFREE(buf); - return uPosFound; -} +local uLong unzlocal_SearchCentralDir OF(( + const zlib_filefunc_def* pzlib_filefunc_def, + voidpf filestream)); -extern unzFile unzReOpen (const char* path, unzFile file) +local uLong unzlocal_SearchCentralDir(pzlib_filefunc_def,filestream) + const zlib_filefunc_def* pzlib_filefunc_def; + voidpf filestream; { - unz_s *s; - FILE * fin; + unsigned char* buf; + uLong uSizeFile; + uLong uBackRead; + uLong uMaxBack=0xffff; /* maximum size of global comment */ + uLong uPosFound=0; + + if (ZSEEK(*pzlib_filefunc_def,filestream,0,ZLIB_FILEFUNC_SEEK_END) != 0) + return 0; - fin=fopen(path,"rb"); - if (fin==NULL) - return NULL; - s=(unz_s*)ALLOC(sizeof(unz_s)); - Com_Memcpy(s, (unz_s*)file, sizeof(unz_s)); + uSizeFile = ZTELL(*pzlib_filefunc_def,filestream); + + if (uMaxBack>uSizeFile) + uMaxBack = uSizeFile; + + buf = (unsigned char*)ALLOC(BUFREADCOMMENT+4); + if (buf==NULL) + return 0; + + uBackRead = 4; + while (uBackRead<uMaxBack) + { + uLong uReadSize,uReadPos ; + int i; + if (uBackRead+BUFREADCOMMENT>uMaxBack) + uBackRead = uMaxBack; + else + uBackRead+=BUFREADCOMMENT; + uReadPos = uSizeFile-uBackRead ; + + uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? + (BUFREADCOMMENT+4) : (uSizeFile-uReadPos); + if (ZSEEK(*pzlib_filefunc_def,filestream,uReadPos,ZLIB_FILEFUNC_SEEK_SET)!=0) + break; + + if (ZREAD(*pzlib_filefunc_def,filestream,buf,uReadSize)!=uReadSize) + break; + + for (i=(int)uReadSize-3; (i--)>0;) + if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && + ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06)) + { + uPosFound = uReadPos+i; + break; + } - s->file = fin; - return (unzFile)s; + if (uPosFound!=0) + break; + } + TRYFREE(buf); + return uPosFound; } /* Open a Zip file. path contain the full pathname (by example, - on a Windows NT computer "c:\\test\\zlib109.zip" or on an Unix computer - "zlib/zlib109.zip". - If the zipfile cannot be opened (file don't exist or in not valid), the - return value is NULL. + on a Windows NT computer "c:\\test\\zlib114.zip" or on an Unix computer + "zlib/zlib114.zip". + If the zipfile cannot be opened (file doesn't exist or in not valid), the + return value is NULL. Else, the return value is a unzFile Handle, usable with other function - of this unzip package. + of this unzip package. */ -extern unzFile unzOpen (const char* path) +extern unzFile ZEXPORT unzOpen2 (path, pzlib_filefunc_def) + const char *path; + zlib_filefunc_def* pzlib_filefunc_def; { - unz_s us; - unz_s *s; - uLong central_pos,uL; - FILE * fin ; - - uLong number_disk; /* number of the current dist, used for - spaning ZIP, unsupported, always 0*/ - uLong number_disk_with_CD; /* number the the disk with central dir, used - for spaning ZIP, unsupported, always 0*/ - uLong number_entry_CD; /* total number of entries in - the central dir - (same than number_entry on nospan) */ - - int err=UNZ_OK; - - fin=fopen(path,"rb"); - if (fin==NULL) - return NULL; - - central_pos = unzlocal_SearchCentralDir(fin); - if (central_pos==0) - err=UNZ_ERRNO; - - if (fseek(fin,central_pos,SEEK_SET)!=0) - err=UNZ_ERRNO; - - /* the signature, already checked */ - if (unzlocal_getLong(fin,&uL)!=UNZ_OK) - err=UNZ_ERRNO; - - /* number of this disk */ - if (unzlocal_getShort(fin,&number_disk)!=UNZ_OK) - err=UNZ_ERRNO; - - /* number of the disk with the start of the central directory */ - if (unzlocal_getShort(fin,&number_disk_with_CD)!=UNZ_OK) - err=UNZ_ERRNO; - - /* total number of entries in the central dir on this disk */ - if (unzlocal_getShort(fin,&us.gi.number_entry)!=UNZ_OK) - err=UNZ_ERRNO; - - /* total number of entries in the central dir */ - if (unzlocal_getShort(fin,&number_entry_CD)!=UNZ_OK) - err=UNZ_ERRNO; - - if ((number_entry_CD!=us.gi.number_entry) || - (number_disk_with_CD!=0) || - (number_disk!=0)) - err=UNZ_BADZIPFILE; - - /* size of the central directory */ - if (unzlocal_getLong(fin,&us.size_central_dir)!=UNZ_OK) - err=UNZ_ERRNO; - - /* offset of start of central directory with respect to the - starting disk number */ - if (unzlocal_getLong(fin,&us.offset_central_dir)!=UNZ_OK) - err=UNZ_ERRNO; - - /* zipfile comment length */ - if (unzlocal_getShort(fin,&us.gi.size_comment)!=UNZ_OK) - err=UNZ_ERRNO; - - if ((central_pos<us.offset_central_dir+us.size_central_dir) && - (err==UNZ_OK)) - err=UNZ_BADZIPFILE; - - if (err!=UNZ_OK) - { - fclose(fin); - return NULL; - } - - us.file=fin; - us.byte_before_the_zipfile = central_pos - - (us.offset_central_dir+us.size_central_dir); - us.central_pos = central_pos; + unz_s us; + unz_s *s; + uLong central_pos,uL; + + uLong number_disk; /* number of the current dist, used for + spaning ZIP, unsupported, always 0*/ + uLong number_disk_with_CD; /* number the the disk with central dir, used + for spaning ZIP, unsupported, always 0*/ + uLong number_entry_CD; /* total number of entries in + the central dir + (same than number_entry on nospan) */ + + int err=UNZ_OK; + + if (unz_copyright[0]!=' ') + return NULL; + + if (pzlib_filefunc_def==NULL) + fill_fopen_filefunc(&us.z_filefunc); + else + us.z_filefunc = *pzlib_filefunc_def; + + us.filestream= (*(us.z_filefunc.zopen_file))(us.z_filefunc.opaque, + path, + ZLIB_FILEFUNC_MODE_READ | + ZLIB_FILEFUNC_MODE_EXISTING); + if (us.filestream==NULL) + return NULL; + + central_pos = unzlocal_SearchCentralDir(&us.z_filefunc,us.filestream); + if (central_pos==0) + err=UNZ_ERRNO; + + if (ZSEEK(us.z_filefunc, us.filestream, + central_pos,ZLIB_FILEFUNC_SEEK_SET)!=0) + err=UNZ_ERRNO; + + /* the signature, already checked */ + if (unzlocal_getLong(&us.z_filefunc, us.filestream,&uL)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of this disk */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_disk)!=UNZ_OK) + err=UNZ_ERRNO; + + /* number of the disk with the start of the central directory */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_disk_with_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central dir on this disk */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&us.gi.number_entry)!=UNZ_OK) + err=UNZ_ERRNO; + + /* total number of entries in the central dir */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&number_entry_CD)!=UNZ_OK) + err=UNZ_ERRNO; + + if ((number_entry_CD!=us.gi.number_entry) || + (number_disk_with_CD!=0) || + (number_disk!=0)) + err=UNZ_BADZIPFILE; + + /* size of the central directory */ + if (unzlocal_getLong(&us.z_filefunc, us.filestream,&us.size_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + /* offset of start of central directory with respect to the + starting disk number */ + if (unzlocal_getLong(&us.z_filefunc, us.filestream,&us.offset_central_dir)!=UNZ_OK) + err=UNZ_ERRNO; + + /* zipfile comment length */ + if (unzlocal_getShort(&us.z_filefunc, us.filestream,&us.gi.size_comment)!=UNZ_OK) + err=UNZ_ERRNO; + + if ((central_pos<us.offset_central_dir+us.size_central_dir) && + (err==UNZ_OK)) + err=UNZ_BADZIPFILE; + + if (err!=UNZ_OK) + { + ZCLOSE(us.z_filefunc, us.filestream); + return NULL; + } + + us.byte_before_the_zipfile = central_pos - + (us.offset_central_dir+us.size_central_dir); + us.central_pos = central_pos; us.pfile_in_zip_read = NULL; - + us.encrypted = 0; + - s=(unz_s*)ALLOC(sizeof(unz_s)); - *s=us; -// unzGoToFirstFile((unzFile)s); - return (unzFile)s; + s=(unz_s*)ALLOC(sizeof(unz_s)); + *s=us; + unzGoToFirstFile((unzFile)s); + return (unzFile)s; } +extern unzFile ZEXPORT unzOpen (path) + const char *path; +{ + return unzOpen2(path, NULL); +} + /* Close a ZipFile opened with unzipOpen. If there is files inside the .Zip opened with unzipOpenCurrentFile (see later), these files MUST be closed with unzipCloseCurrentFile before call unzipClose. return UNZ_OK if there is no problem. */ -extern int unzClose (unzFile file) +extern int ZEXPORT unzClose (file) + unzFile file; { - unz_s* s; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; + unz_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; if (s->pfile_in_zip_read!=NULL) unzCloseCurrentFile(file); - fclose(s->file); - TRYFREE(s); - return UNZ_OK; + ZCLOSE(s->z_filefunc, s->filestream); + TRYFREE(s); + return UNZ_OK; } @@ -1428,21 +532,31 @@ extern int unzClose (unzFile file) Write info about the ZipFile in the *pglobal_info structure. No preparation of the structure is needed return UNZ_OK if there is no problem. */ -extern int unzGetGlobalInfo (unzFile file,unz_global_info *pglobal_info) +extern int ZEXPORT unzGetGlobalInfo (file,pglobal_info) + unzFile file; + unz_global_info *pglobal_info; { - unz_s* s; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - *pglobal_info=s->gi; - return UNZ_OK; + unz_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + *pglobal_info=s->gi; + return UNZ_OK; } /* Translate date/time from Dos format to tm_unz (readable more easilty) */ -static void unzlocal_DosDateToTmuDate (uLong ulDosDate, tm_unz* ptm) + +local void unzlocal_DosDateToTmuDate OF(( + uLong ulDosDate, + tm_unz* ptm)); + + +local void unzlocal_DosDateToTmuDate (ulDosDate, ptm) + uLong ulDosDate; + tm_unz* ptm; { uLong uDate; uDate = (uLong)(ulDosDate>>16); @@ -1458,161 +572,181 @@ static void unzlocal_DosDateToTmuDate (uLong ulDosDate, tm_unz* ptm) /* Get Info about the current file in the zipfile, with internal only info */ -static int unzlocal_GetCurrentFileInfoInternal (unzFile file, +local int unzlocal_GetCurrentFileInfoInternal OF((unzFile file, unz_file_info *pfile_info, - unz_file_info_internal + unz_file_info_internal *pfile_info_internal, char *szFileName, - uLong fileNameBufferSize, + uLong fileNameBufferSize, void *extraField, - uLong extraFieldBufferSize, + uLong extraFieldBufferSize, char *szComment, - uLong commentBufferSize) + uLong commentBufferSize)); + +local int unzlocal_GetCurrentFileInfoInternal (file, + pfile_info, + pfile_info_internal, + szFileName, fileNameBufferSize, + extraField, extraFieldBufferSize, + szComment, commentBufferSize) + unzFile file; + unz_file_info *pfile_info; + unz_file_info_internal *pfile_info_internal; + char *szFileName; + uLong fileNameBufferSize; + void *extraField; + uLong extraFieldBufferSize; + char *szComment; + uLong commentBufferSize; { - unz_s* s; - unz_file_info file_info; - unz_file_info_internal file_info_internal; - int err=UNZ_OK; - uLong uMagic; - long lSeek=0; - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - if (fseek(s->file,s->pos_in_central_dir+s->byte_before_the_zipfile,SEEK_SET)!=0) - err=UNZ_ERRNO; - - - /* we check the magic */ - if (err==UNZ_OK) { - if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK) - err=UNZ_ERRNO; - else if (uMagic!=0x02014b50) - err=UNZ_BADZIPFILE; - } - if (unzlocal_getShort(s->file,&file_info.version) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.version_needed) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.flag) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.compression_method) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info.dosDate) != UNZ_OK) - err=UNZ_ERRNO; + unz_s* s; + unz_file_info file_info; + unz_file_info_internal file_info_internal; + int err=UNZ_OK; + uLong uMagic; + long lSeek=0; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (ZSEEK(s->z_filefunc, s->filestream, + s->pos_in_central_dir+s->byte_before_the_zipfile, + ZLIB_FILEFUNC_SEEK_SET)!=0) + err=UNZ_ERRNO; + + + /* we check the magic */ + if (err==UNZ_OK) + { + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x02014b50) + err=UNZ_BADZIPFILE; + } + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.version) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.version_needed) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.flag) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.compression_method) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.dosDate) != UNZ_OK) + err=UNZ_ERRNO; unzlocal_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date); - if (unzlocal_getLong(s->file,&file_info.crc) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info.compressed_size) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info.uncompressed_size) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.size_filename) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.size_file_extra) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.size_file_comment) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.disk_num_start) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&file_info.internal_fa) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info.external_fa) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&file_info_internal.offset_curfile) != UNZ_OK) - err=UNZ_ERRNO; - - lSeek+=file_info.size_filename; - if ((err==UNZ_OK) && (szFileName!=NULL)) - { - uLong uSizeRead ; - if (file_info.size_filename<fileNameBufferSize) - { - *(szFileName+file_info.size_filename)='\0'; - uSizeRead = file_info.size_filename; - } - else - uSizeRead = fileNameBufferSize; - - if ((file_info.size_filename>0) && (fileNameBufferSize>0)) - if (fread(szFileName,(uInt)uSizeRead,1,s->file)!=1) - err=UNZ_ERRNO; - lSeek -= uSizeRead; - } - - - if ((err==UNZ_OK) && (extraField!=NULL)) - { - uLong uSizeRead ; - if (file_info.size_file_extra<extraFieldBufferSize) - uSizeRead = file_info.size_file_extra; - else - uSizeRead = extraFieldBufferSize; - - if (lSeek!=0) { - if (fseek(s->file,lSeek,SEEK_CUR)==0) - lSeek=0; - else - err=UNZ_ERRNO; - } - if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0)) { - if (fread(extraField,(uInt)uSizeRead,1,s->file)!=1) - err=UNZ_ERRNO; - } - lSeek += file_info.size_file_extra - uSizeRead; - } - else - lSeek+=file_info.size_file_extra; - - - if ((err==UNZ_OK) && (szComment!=NULL)) - { - uLong uSizeRead ; - if (file_info.size_file_comment<commentBufferSize) - { - *(szComment+file_info.size_file_comment)='\0'; - uSizeRead = file_info.size_file_comment; - } - else - uSizeRead = commentBufferSize; - - if (lSeek!=0) { - if (fseek(s->file,lSeek,SEEK_CUR)==0) - lSeek=0; - else - err=UNZ_ERRNO; - } - if ((file_info.size_file_comment>0) && (commentBufferSize>0)) { - if (fread(szComment,(uInt)uSizeRead,1,s->file)!=1) - err=UNZ_ERRNO; - } - lSeek+=file_info.size_file_comment - uSizeRead; - } - else - lSeek+=file_info.size_file_comment; - - if ((err==UNZ_OK) && (pfile_info!=NULL)) - *pfile_info=file_info; - - if ((err==UNZ_OK) && (pfile_info_internal!=NULL)) - *pfile_info_internal=file_info_internal; - - return err; + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.crc) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_filename) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_extra) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.size_file_comment) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.disk_num_start) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&file_info.internal_fa) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info.external_fa) != UNZ_OK) + err=UNZ_ERRNO; + + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK) + err=UNZ_ERRNO; + + lSeek+=file_info.size_filename; + if ((err==UNZ_OK) && (szFileName!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_filename<fileNameBufferSize) + { + *(szFileName+file_info.size_filename)='\0'; + uSizeRead = file_info.size_filename; + } + else + uSizeRead = fileNameBufferSize; + + if ((file_info.size_filename>0) && (fileNameBufferSize>0)) + if (ZREAD(s->z_filefunc, s->filestream,szFileName,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + lSeek -= uSizeRead; + } + + + if ((err==UNZ_OK) && (extraField!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_file_extra<extraFieldBufferSize) + uSizeRead = file_info.size_file_extra; + else + uSizeRead = extraFieldBufferSize; + + if (lSeek!=0) + { + if (ZSEEK(s->z_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + } + if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0)) + if (ZREAD(s->z_filefunc, s->filestream,extraField,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + lSeek += file_info.size_file_extra - uSizeRead; + } + else + lSeek+=file_info.size_file_extra; + + + if ((err==UNZ_OK) && (szComment!=NULL)) + { + uLong uSizeRead ; + if (file_info.size_file_comment<commentBufferSize) + { + *(szComment+file_info.size_file_comment)='\0'; + uSizeRead = file_info.size_file_comment; + } + else + uSizeRead = commentBufferSize; + + if (lSeek!=0) + { + if (ZSEEK(s->z_filefunc, s->filestream,lSeek,ZLIB_FILEFUNC_SEEK_CUR)==0) + lSeek=0; + else + err=UNZ_ERRNO; + } + if ((file_info.size_file_comment>0) && (commentBufferSize>0)) + if (ZREAD(s->z_filefunc, s->filestream,szComment,uSizeRead)!=uSizeRead) + err=UNZ_ERRNO; + lSeek+=file_info.size_file_comment - uSizeRead; + } + else + lSeek+=file_info.size_file_comment; + + if ((err==UNZ_OK) && (pfile_info!=NULL)) + *pfile_info=file_info; + + if ((err==UNZ_OK) && (pfile_info_internal!=NULL)) + *pfile_info_internal=file_info_internal; + + return err; } @@ -1622,102 +756,77 @@ static int unzlocal_GetCurrentFileInfoInternal (unzFile file, No preparation of the structure is needed return UNZ_OK if there is no problem. */ -extern int unzGetCurrentFileInfo ( unzFile file, unz_file_info *pfile_info, - char *szFileName, uLong fileNameBufferSize, - void *extraField, uLong extraFieldBufferSize, - char *szComment, uLong commentBufferSize) +extern int ZEXPORT unzGetCurrentFileInfo (file, + pfile_info, + szFileName, fileNameBufferSize, + extraField, extraFieldBufferSize, + szComment, commentBufferSize) + unzFile file; + unz_file_info *pfile_info; + char *szFileName; + uLong fileNameBufferSize; + void *extraField; + uLong extraFieldBufferSize; + char *szComment; + uLong commentBufferSize; { - return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL, - szFileName,fileNameBufferSize, - extraField,extraFieldBufferSize, - szComment,commentBufferSize); + return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL, + szFileName,fileNameBufferSize, + extraField,extraFieldBufferSize, + szComment,commentBufferSize); } /* Set the current file of the zipfile to the first file. return UNZ_OK if there is no problem */ -extern int unzGoToFirstFile (unzFile file) +extern int ZEXPORT unzGoToFirstFile (file) + unzFile file; { - int err=UNZ_OK; - unz_s* s; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - s->pos_in_central_dir=s->offset_central_dir; - s->num_file=0; - err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, - &s->cur_file_info_internal, - NULL,0,NULL,0,NULL,0); - s->current_file_ok = (err == UNZ_OK); - return err; + int err=UNZ_OK; + unz_s* s; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + s->pos_in_central_dir=s->offset_central_dir; + s->num_file=0; + err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; } - /* Set the current file of the zipfile to the next file. return UNZ_OK if there is no problem return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest. */ -extern int unzGoToNextFile (unzFile file) -{ - unz_s* s; - int err; - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - if (!s->current_file_ok) - return UNZ_END_OF_LIST_OF_FILE; - if (s->num_file+1==s->gi.number_entry) - return UNZ_END_OF_LIST_OF_FILE; - - s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename + - s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ; - s->num_file++; - err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, - &s->cur_file_info_internal, - NULL,0,NULL,0,NULL,0); - s->current_file_ok = (err == UNZ_OK); - return err; -} - -/* - Get the position of the info of the current file in the zip. - return UNZ_OK if there is no problem -*/ -extern int unzGetCurrentFileInfoPosition (unzFile file, unsigned long *pos ) +extern int ZEXPORT unzGoToNextFile (file) + unzFile file; { - unz_s* s; - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; + unz_s* s; + int err; - *pos = s->pos_in_central_dir; - return UNZ_OK; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + if (s->gi.number_entry != 0xffff) /* 2^16 files overflow hack */ + if (s->num_file+1==s->gi.number_entry) + return UNZ_END_OF_LIST_OF_FILE; + + s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename + + s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ; + s->num_file++; + err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; } -/* - Set the position of the info of the current file in the zip. - return UNZ_OK if there is no problem -*/ -extern int unzSetCurrentFileInfoPosition (unzFile file, unsigned long pos ) -{ - unz_s* s; - int err; - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - - s->pos_in_central_dir = pos; - err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, - &s->cur_file_info_internal, - NULL,0,NULL,0,NULL,0); - s->current_file_ok = (err == UNZ_OK); - return UNZ_OK; -} /* Try locate the file szFileName in the zipfile. @@ -1727,2574 +836,787 @@ extern int unzSetCurrentFileInfoPosition (unzFile file, unsigned long pos ) UNZ_OK if the file is found. It becomes the current file. UNZ_END_OF_LIST_OF_FILE if the file is not found */ -extern int unzLocateFile (unzFile file, const char *szFileName, int iCaseSensitivity) +extern int ZEXPORT unzLocateFile (file, szFileName, iCaseSensitivity) + unzFile file; + const char *szFileName; + int iCaseSensitivity; { - unz_s* s; - int err; + unz_s* s; + int err; - - uLong num_fileSaved; - uLong pos_in_central_dirSaved; + /* We remember the 'current' position in the file so that we can jump + * back there if we fail. + */ + unz_file_info cur_file_infoSaved; + unz_file_info_internal cur_file_info_internalSaved; + uLong num_fileSaved; + uLong pos_in_central_dirSaved; - if (file==NULL) - return UNZ_PARAMERROR; + if (file==NULL) + return UNZ_PARAMERROR; if (strlen(szFileName)>=UNZ_MAXFILENAMEINZIP) return UNZ_PARAMERROR; - s=(unz_s*)file; - if (!s->current_file_ok) - return UNZ_END_OF_LIST_OF_FILE; - - num_fileSaved = s->num_file; - pos_in_central_dirSaved = s->pos_in_central_dir; - - err = unzGoToFirstFile(file); - - while (err == UNZ_OK) - { - char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1]; - unzGetCurrentFileInfo(file,NULL, - szCurrentFileName,sizeof(szCurrentFileName)-1, - NULL,0,NULL,0); - if (unzStringFileNameCompare(szCurrentFileName, - szFileName,iCaseSensitivity)==0) - return UNZ_OK; - err = unzGoToNextFile(file); - } - - s->num_file = num_fileSaved ; - s->pos_in_central_dir = pos_in_central_dirSaved ; - return err; -} + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + /* Save the current state */ + num_fileSaved = s->num_file; + pos_in_central_dirSaved = s->pos_in_central_dir; + cur_file_infoSaved = s->cur_file_info; + cur_file_info_internalSaved = s->cur_file_info_internal; -/* - Read the static header of the current zipfile - Check the coherency of the static header and info in the end of central - directory about this file - store in *piSizeVar the size of extra info in static header - (filename and size of extra field data) -*/ -static int unzlocal_CheckCurrentFileCoherencyHeader (unz_s* s, uInt* piSizeVar, - uLong *poffset_local_extrafield, - uInt *psize_local_extrafield) -{ - uLong uMagic,uData,uFlags; - uLong size_filename; - uLong size_extra_field; - int err=UNZ_OK; - - *piSizeVar = 0; - *poffset_local_extrafield = 0; - *psize_local_extrafield = 0; - - if (fseek(s->file,s->cur_file_info_internal.offset_curfile + - s->byte_before_the_zipfile,SEEK_SET)!=0) - return UNZ_ERRNO; - - - if (err==UNZ_OK) { - if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK) - err=UNZ_ERRNO; - else if (uMagic!=0x04034b50) - err=UNZ_BADZIPFILE; - } - if (unzlocal_getShort(s->file,&uData) != UNZ_OK) - err=UNZ_ERRNO; -/* - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion)) - err=UNZ_BADZIPFILE; -*/ - if (unzlocal_getShort(s->file,&uFlags) != UNZ_OK) - err=UNZ_ERRNO; - - if (unzlocal_getShort(s->file,&uData) != UNZ_OK) - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method)) - err=UNZ_BADZIPFILE; - - if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) && - (s->cur_file_info.compression_method!=Z_DEFLATED)) - err=UNZ_BADZIPFILE; + err = unzGoToFirstFile(file); - if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* date/time */ - err=UNZ_ERRNO; - - if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* crc */ - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) && - ((uFlags & 8)==0)) - err=UNZ_BADZIPFILE; - - if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* size compr */ - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) && - ((uFlags & 8)==0)) - err=UNZ_BADZIPFILE; - - if (unzlocal_getLong(s->file,&uData) != UNZ_OK) /* size uncompr */ - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) && - ((uFlags & 8)==0)) - err=UNZ_BADZIPFILE; - - - if (unzlocal_getShort(s->file,&size_filename) != UNZ_OK) - err=UNZ_ERRNO; - else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename)) - err=UNZ_BADZIPFILE; - - *piSizeVar += (uInt)size_filename; + while (err == UNZ_OK) + { + char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1]; + err = unzGetCurrentFileInfo(file,NULL, + szCurrentFileName,sizeof(szCurrentFileName)-1, + NULL,0,NULL,0); + if (err == UNZ_OK) + { + if (unzStringFileNameCompare(szCurrentFileName, + szFileName,iCaseSensitivity)==0) + return UNZ_OK; + err = unzGoToNextFile(file); + } + } - if (unzlocal_getShort(s->file,&size_extra_field) != UNZ_OK) - err=UNZ_ERRNO; - *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile + - SIZEZIPLOCALHEADER + size_filename; - *psize_local_extrafield = (uInt)size_extra_field; + /* We failed, so restore the state of the 'current file' to where we + * were. + */ + s->num_file = num_fileSaved ; + s->pos_in_central_dir = pos_in_central_dirSaved ; + s->cur_file_info = cur_file_infoSaved; + s->cur_file_info_internal = cur_file_info_internalSaved; + return err; +} - *piSizeVar += (uInt)size_extra_field; - return err; -} - /* - Open for reading data the current file in the zipfile. - If there is no error and the file is opened, the return value is UNZ_OK. +/////////////////////////////////////////// +// Contributed by Ryan Haksi (mailto://cryogen@infoserve.net) +// I need random access +// +// Further optimization could be realized by adding an ability +// to cache the directory in memory. The goal being a single +// comprehensive file read to put the file I need in a memory. */ -extern int unzOpenCurrentFile (unzFile file) -{ - int err=UNZ_OK; - int Store; - uInt iSizeVar; - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - uLong offset_local_extrafield; /* offset of the static extra field */ - uInt size_local_extrafield; /* size of the static extra field */ - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - if (!s->current_file_ok) - return UNZ_PARAMERROR; - - if (s->pfile_in_zip_read != NULL) - unzCloseCurrentFile(file); - if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar, - &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK) - return UNZ_BADZIPFILE; - - pfile_in_zip_read_info = (file_in_zip_read_info_s*) - ALLOC(sizeof(file_in_zip_read_info_s)); - if (pfile_in_zip_read_info==NULL) - return UNZ_INTERNALERROR; - - pfile_in_zip_read_info->read_buffer=(char*)ALLOC(UNZ_BUFSIZE); - pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield; - pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield; - pfile_in_zip_read_info->pos_local_extrafield=0; - - if (pfile_in_zip_read_info->read_buffer==NULL) - { - TRYFREE(pfile_in_zip_read_info); - return UNZ_INTERNALERROR; - } - - pfile_in_zip_read_info->stream_initialised=0; - - if ((s->cur_file_info.compression_method!=0) && - (s->cur_file_info.compression_method!=Z_DEFLATED)) - err=UNZ_BADZIPFILE; - Store = s->cur_file_info.compression_method==0; - - pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc; - pfile_in_zip_read_info->crc32=0; - pfile_in_zip_read_info->compression_method = - s->cur_file_info.compression_method; - pfile_in_zip_read_info->file=s->file; - pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile; - - pfile_in_zip_read_info->stream.total_out = 0; +/* +typedef struct unz_file_pos_s +{ + uLong pos_in_zip_directory; // offset in file + uLong num_of_file; // # of file +} unz_file_pos; +*/ - if (!Store) - { - pfile_in_zip_read_info->stream.zalloc = (alloc_func)0; - pfile_in_zip_read_info->stream.zfree = (free_func)0; - pfile_in_zip_read_info->stream.opaque = (voidp)0; - - err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS); - if (err == Z_OK) - pfile_in_zip_read_info->stream_initialised=1; - /* windowBits is passed < 0 to tell that there is no zlib header. - * Note that in this case inflate *requires* an extra "dummy" byte - * after the compressed stream in order to complete decompression and - * return Z_STREAM_END. - * In unzip, i don't wait absolutely Z_STREAM_END because I known the - * size of both compressed and uncompressed data - */ - } - pfile_in_zip_read_info->rest_read_compressed = - s->cur_file_info.compressed_size ; - pfile_in_zip_read_info->rest_read_uncompressed = - s->cur_file_info.uncompressed_size ; +extern int ZEXPORT unzGetFilePos(file, file_pos) + unzFile file; + unz_file_pos* file_pos; +{ + unz_s* s; - - pfile_in_zip_read_info->pos_in_zipfile = - s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER + - iSizeVar; - - pfile_in_zip_read_info->stream.avail_in = (uInt)0; + if (file==NULL || file_pos==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_END_OF_LIST_OF_FILE; + file_pos->pos_in_zip_directory = s->pos_in_central_dir; + file_pos->num_of_file = s->num_file; - s->pfile_in_zip_read = pfile_in_zip_read_info; return UNZ_OK; } - -/* - Read bytes from the current file. - buf contain buffer where data must be copied - len the size of buf. - - return the number of byte copied if somes bytes are copied - return 0 if the end of file was reached - return <0 with error code if there is an error - (UNZ_ERRNO for IO error, or zLib error for uncompress error) -*/ -extern int unzReadCurrentFile (unzFile file, void *buf, unsigned len) +extern int ZEXPORT unzGoToFilePos(file, file_pos) + unzFile file; + unz_file_pos* file_pos; { - int err=UNZ_OK; - uInt iRead = 0; - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; - - - if ((pfile_in_zip_read_info->read_buffer == NULL)) - return UNZ_END_OF_LIST_OF_FILE; - if (len==0) - return 0; - - pfile_in_zip_read_info->stream.next_out = (Byte*)buf; - - pfile_in_zip_read_info->stream.avail_out = (uInt)len; - - if (len>pfile_in_zip_read_info->rest_read_uncompressed) - pfile_in_zip_read_info->stream.avail_out = - (uInt)pfile_in_zip_read_info->rest_read_uncompressed; - - while (pfile_in_zip_read_info->stream.avail_out>0) - { - if ((pfile_in_zip_read_info->stream.avail_in==0) && - (pfile_in_zip_read_info->rest_read_compressed>0)) - { - uInt uReadThis = UNZ_BUFSIZE; - if (pfile_in_zip_read_info->rest_read_compressed<uReadThis) - uReadThis = (uInt)pfile_in_zip_read_info->rest_read_compressed; - if (uReadThis == 0) - return UNZ_EOF; - if (s->cur_file_info.compressed_size == pfile_in_zip_read_info->rest_read_compressed) - if (fseek(pfile_in_zip_read_info->file, - pfile_in_zip_read_info->pos_in_zipfile + - pfile_in_zip_read_info->byte_before_the_zipfile,SEEK_SET)!=0) - return UNZ_ERRNO; - if (fread(pfile_in_zip_read_info->read_buffer,uReadThis,1, - pfile_in_zip_read_info->file)!=1) - return UNZ_ERRNO; - pfile_in_zip_read_info->pos_in_zipfile += uReadThis; - - pfile_in_zip_read_info->rest_read_compressed-=uReadThis; - - pfile_in_zip_read_info->stream.next_in = - (Byte*)pfile_in_zip_read_info->read_buffer; - pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis; - } - - if (pfile_in_zip_read_info->compression_method==0) - { - uInt uDoCopy,i ; - if (pfile_in_zip_read_info->stream.avail_out < - pfile_in_zip_read_info->stream.avail_in) - uDoCopy = pfile_in_zip_read_info->stream.avail_out ; - else - uDoCopy = pfile_in_zip_read_info->stream.avail_in ; - - for (i=0;i<uDoCopy;i++) - *(pfile_in_zip_read_info->stream.next_out+i) = - *(pfile_in_zip_read_info->stream.next_in+i); - -// pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32, -// pfile_in_zip_read_info->stream.next_out, -// uDoCopy); - pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy; - pfile_in_zip_read_info->stream.avail_in -= uDoCopy; - pfile_in_zip_read_info->stream.avail_out -= uDoCopy; - pfile_in_zip_read_info->stream.next_out += uDoCopy; - pfile_in_zip_read_info->stream.next_in += uDoCopy; - pfile_in_zip_read_info->stream.total_out += uDoCopy; - iRead += uDoCopy; - } - else - { - uLong uTotalOutBefore,uTotalOutAfter; - const Byte *bufBefore; - uLong uOutThis; - int flush=Z_SYNC_FLUSH; - - uTotalOutBefore = pfile_in_zip_read_info->stream.total_out; - bufBefore = pfile_in_zip_read_info->stream.next_out; - - /* - if ((pfile_in_zip_read_info->rest_read_uncompressed == - pfile_in_zip_read_info->stream.avail_out) && - (pfile_in_zip_read_info->rest_read_compressed == 0)) - flush = Z_FINISH; - */ - err=inflate(&pfile_in_zip_read_info->stream,flush); - - uTotalOutAfter = pfile_in_zip_read_info->stream.total_out; - uOutThis = uTotalOutAfter-uTotalOutBefore; - -// pfile_in_zip_read_info->crc32 = -// crc32(pfile_in_zip_read_info->crc32,bufBefore, -// (uInt)(uOutThis)); - - pfile_in_zip_read_info->rest_read_uncompressed -= - uOutThis; + unz_s* s; + int err; - iRead += (uInt)(uTotalOutAfter - uTotalOutBefore); - - if (err==Z_STREAM_END) - return (iRead==0) ? UNZ_EOF : iRead; - if (err!=Z_OK) - break; - } - } - - if (err==Z_OK) - return iRead; - return err; + if (file==NULL || file_pos==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + /* jump to the right spot */ + s->pos_in_central_dir = file_pos->pos_in_zip_directory; + s->num_file = file_pos->num_of_file; + + /* set the current file */ + err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + /* return results */ + s->current_file_ok = (err == UNZ_OK); + return err; } - /* - Give the current position in uncompressed data +// Unzip Helper Functions - should be here? +/////////////////////////////////////////// */ -extern long unztell (unzFile file) -{ - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; - - return (long)pfile_in_zip_read_info->stream.total_out; -} - /* - return 1 if the end of file was reached, 0 elsewhere + Read the local header of the current zipfile + Check the coherency of the local header and info in the end of central + directory about this file + store in *piSizeVar the size of extra info in local header + (filename and size of extra field data) */ -extern int unzeof (unzFile file) -{ - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; - - if (pfile_in_zip_read_info->rest_read_uncompressed == 0) - return 1; - else - return 0; -} +local int unzlocal_CheckCurrentFileCoherencyHeader OF(( + unz_s* s, + uInt* piSizeVar, + uLong *poffset_local_extrafield, + uInt *psize_local_extrafield)); - -/* - Read extra field from the current file (opened by unzOpenCurrentFile) - This is the static-header version of the extra field (sometimes, there is - more info in the static-header version than in the central-header) - - if buf==NULL, it return the size of the static extra field that can be read - - if buf!=NULL, len is the size of the buffer, the extra header is copied in - buf. - the return value is the number of bytes copied in buf, or (if <0) - the error code -*/ -extern int unzGetLocalExtrafield (unzFile file,void *buf,unsigned len) +local int unzlocal_CheckCurrentFileCoherencyHeader (s,piSizeVar, + poffset_local_extrafield, + psize_local_extrafield) + unz_s* s; + uInt* piSizeVar; + uLong *poffset_local_extrafield; + uInt *psize_local_extrafield; { - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - uInt read_now; - uLong size_to_read; - - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; + uLong uMagic,uData,uFlags; + uLong size_filename; + uLong size_extra_field; + int err=UNZ_OK; - size_to_read = (pfile_in_zip_read_info->size_local_extrafield - - pfile_in_zip_read_info->pos_local_extrafield); + *piSizeVar = 0; + *poffset_local_extrafield = 0; + *psize_local_extrafield = 0; - if (buf==NULL) - return (int)size_to_read; - - if (len>size_to_read) - read_now = (uInt)size_to_read; - else - read_now = (uInt)len ; + if (ZSEEK(s->z_filefunc, s->filestream,s->cur_file_info_internal.offset_curfile + + s->byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; - if (read_now==0) - return 0; - - if (fseek(pfile_in_zip_read_info->file, - pfile_in_zip_read_info->offset_local_extrafield + - pfile_in_zip_read_info->pos_local_extrafield,SEEK_SET)!=0) - return UNZ_ERRNO; - if (fread(buf,(uInt)size_to_read,1,pfile_in_zip_read_info->file)!=1) - return UNZ_ERRNO; - - return (int)read_now; -} + if (err==UNZ_OK) + { + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uMagic) != UNZ_OK) + err=UNZ_ERRNO; + else if (uMagic!=0x04034b50) + err=UNZ_BADZIPFILE; + } + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) + err=UNZ_ERRNO; /* - Close the file in zip opened with unzipOpenCurrentFile - Return UNZ_CRCERROR if all the file was read but the CRC is not good + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion)) + err=UNZ_BADZIPFILE; */ -extern int unzCloseCurrentFile (unzFile file) -{ - int err=UNZ_OK; + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uFlags) != UNZ_OK) + err=UNZ_ERRNO; - unz_s* s; - file_in_zip_read_info_s* pfile_in_zip_read_info; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; - pfile_in_zip_read_info=s->pfile_in_zip_read; - - if (pfile_in_zip_read_info==NULL) - return UNZ_PARAMERROR; + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method)) + err=UNZ_BADZIPFILE; -/* - if (pfile_in_zip_read_info->rest_read_uncompressed == 0) - { - if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait) - err=UNZ_CRCERROR; - } -*/ + if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) && + (s->cur_file_info.compression_method!=Z_DEFLATED)) + err=UNZ_BADZIPFILE; - TRYFREE(pfile_in_zip_read_info->read_buffer); - pfile_in_zip_read_info->read_buffer = NULL; - if (pfile_in_zip_read_info->stream_initialised) - inflateEnd(&pfile_in_zip_read_info->stream); + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* date/time */ + err=UNZ_ERRNO; - pfile_in_zip_read_info->stream_initialised = 0; - TRYFREE(pfile_in_zip_read_info); + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* crc */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; - s->pfile_in_zip_read=NULL; + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size compr */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; - return err; -} + if (unzlocal_getLong(&s->z_filefunc, s->filestream,&uData) != UNZ_OK) /* size uncompr */ + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) && + ((uFlags & 8)==0)) + err=UNZ_BADZIPFILE; -/* - Get the global comment string of the ZipFile, in the szComment buffer. - uSizeBuf is the size of the szComment buffer. - return the number of byte copied or an error code <0 -*/ -extern int unzGetGlobalComment (unzFile file, char *szComment, uLong uSizeBuf) -{ - unz_s* s; - uLong uReadThis ; - if (file==NULL) - return UNZ_PARAMERROR; - s=(unz_s*)file; + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&size_filename) != UNZ_OK) + err=UNZ_ERRNO; + else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename)) + err=UNZ_BADZIPFILE; - uReadThis = uSizeBuf; - if (uReadThis>s->gi.size_comment) - uReadThis = s->gi.size_comment; + *piSizeVar += (uInt)size_filename; - if (fseek(s->file,s->central_pos+22,SEEK_SET)!=0) - return UNZ_ERRNO; + if (unzlocal_getShort(&s->z_filefunc, s->filestream,&size_extra_field) != UNZ_OK) + err=UNZ_ERRNO; + *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile + + SIZEZIPLOCALHEADER + size_filename; + *psize_local_extrafield = (uInt)size_extra_field; - if (uReadThis>0) - { - *szComment='\0'; - if (fread(szComment,(uInt)uReadThis,1,s->file)!=1) - return UNZ_ERRNO; - } + *piSizeVar += (uInt)size_extra_field; - if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment)) - *(szComment+s->gi.size_comment)='\0'; - return (int)uReadThis; + return err; } -/* infblock.h -- header to use infblock.c - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -struct inflate_blocks_state; -typedef struct inflate_blocks_state inflate_blocks_statef; - -static inflate_blocks_statef * inflate_blocks_new OF(( - z_streamp z, - check_func c, /* check function */ - uInt w)); /* window size */ - -static int inflate_blocks OF(( - inflate_blocks_statef *, - z_streamp , - int)); /* initial return code */ +/* + Open for reading data the current file in the zipfile. + If there is no error and the file is opened, the return value is UNZ_OK. +*/ +extern int ZEXPORT unzOpenCurrentFile3 (file, method, level, raw, password) + unzFile file; + int* method; + int* level; + int raw; + const char* password; +{ + int err=UNZ_OK; + uInt iSizeVar; + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + uLong offset_local_extrafield; /* offset of the local extra field */ + uInt size_local_extrafield; /* size of the local extra field */ +# ifndef NOUNCRYPT + char source[12]; +# else + if (password != NULL) + return UNZ_PARAMERROR; +# endif -static void inflate_blocks_reset OF(( - inflate_blocks_statef *, - z_streamp , - uLong *)); /* check value on output */ + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return UNZ_PARAMERROR; -static int inflate_blocks_free OF(( - inflate_blocks_statef *, - z_streamp)); + if (s->pfile_in_zip_read != NULL) + unzCloseCurrentFile(file); -#if 0 -static void inflate_set_dictionary OF(( - inflate_blocks_statef *s, - const Byte *d, /* dictionary */ - uInt n)); /* dictionary length */ + if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar, + &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK) + return UNZ_BADZIPFILE; -static int inflate_blocks_sync_point OF(( - inflate_blocks_statef *s)); -#endif + pfile_in_zip_read_info = (file_in_zip_read_info_s*) + ALLOC(sizeof(file_in_zip_read_info_s)); + if (pfile_in_zip_read_info==NULL) + return UNZ_INTERNALERROR; -/* simplify the use of the inflate_huft type with some defines */ -#define exop word.what.Exop -#define bits word.what.Bits + pfile_in_zip_read_info->read_buffer=(char*)ALLOC(UNZ_BUFSIZE); + pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield; + pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield; + pfile_in_zip_read_info->pos_local_extrafield=0; + pfile_in_zip_read_info->raw=raw; -/* Table for deflate from PKZIP's appnote.txt. */ -static const uInt border[] = { /* Order of the bit length code lengths */ - 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + if (pfile_in_zip_read_info->read_buffer==NULL) + { + TRYFREE(pfile_in_zip_read_info); + return UNZ_INTERNALERROR; + } -/* inftrees.h -- header to use inftrees.c - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ + pfile_in_zip_read_info->stream_initialised=0; -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ + if (method!=NULL) + *method = (int)s->cur_file_info.compression_method; -/* Huffman code lookup table entry--this entry is four bytes for machines - that have 16-bit pointers (e.g. PC's in the small or medium model). */ - -typedef struct inflate_huft_s inflate_huft; - -struct inflate_huft_s { - union { - struct { - Byte Exop; /* number of extra bits or operation */ - Byte Bits; /* number of bits in this code or subcode */ - } what; - uInt pad; /* pad structure to a power of 2 (4 bytes for */ - } word; /* 16-bit, 8 bytes for 32-bit int's) */ - uInt base; /* literal, length base, distance base, - or table offset */ -}; - -/* Maximum size of dynamic tree. The maximum found in a long but non- - exhaustive search was 1004 huft structures (850 for length/literals - and 154 for distances, the latter actually the result of an - exhaustive search). The actual maximum is not known, but the - value below is more than safe. */ -#define MANY 1440 - -static int inflate_trees_bits OF(( - uInt *, /* 19 code lengths */ - uInt *, /* bits tree desired/actual depth */ - inflate_huft * *, /* bits tree result */ - inflate_huft *, /* space for trees */ - z_streamp)); /* for messages */ - -static int inflate_trees_dynamic OF(( - uInt, /* number of literal/length codes */ - uInt, /* number of distance codes */ - uInt *, /* that many (total) code lengths */ - uInt *, /* literal desired/actual bit depth */ - uInt *, /* distance desired/actual bit depth */ - inflate_huft * *, /* literal/length tree result */ - inflate_huft * *, /* distance tree result */ - inflate_huft *, /* space for trees */ - z_streamp)); /* for messages */ - -static int inflate_trees_fixed OF(( - uInt *, /* literal desired/actual bit depth */ - uInt *, /* distance desired/actual bit depth */ - inflate_huft * *, /* literal/length tree result */ - inflate_huft * *, /* distance tree result */ - z_streamp)); /* for memory allocation */ - - -/* infcodes.h -- header to use infcodes.c - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ + if (level!=NULL) + { + *level = 6; + switch (s->cur_file_info.flag & 0x06) + { + case 6 : *level = 1; break; + case 4 : *level = 2; break; + case 2 : *level = 9; break; + } + } -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ + if ((s->cur_file_info.compression_method!=0) && + (s->cur_file_info.compression_method!=Z_DEFLATED)) + err=UNZ_BADZIPFILE; -struct inflate_codes_state; -typedef struct inflate_codes_state inflate_codes_statef; + pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc; + pfile_in_zip_read_info->crc32=0; + pfile_in_zip_read_info->compression_method = + s->cur_file_info.compression_method; + pfile_in_zip_read_info->filestream=s->filestream; + pfile_in_zip_read_info->z_filefunc=s->z_filefunc; + pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile; -static inflate_codes_statef *inflate_codes_new OF(( - uInt, uInt, - inflate_huft *, inflate_huft *, - z_streamp )); + pfile_in_zip_read_info->stream.total_out = 0; -static int inflate_codes OF(( - inflate_blocks_statef *, - z_streamp , - int)); + if ((s->cur_file_info.compression_method==Z_DEFLATED) && + (!raw)) + { + pfile_in_zip_read_info->stream.zalloc = (alloc_func)0; + pfile_in_zip_read_info->stream.zfree = (free_func)0; + pfile_in_zip_read_info->stream.opaque = (voidpf)0; + pfile_in_zip_read_info->stream.next_in = (voidpf)0; + pfile_in_zip_read_info->stream.avail_in = 0; + + err=inflateInit2(&pfile_in_zip_read_info->stream, -MAX_WBITS); + if (err == Z_OK) + pfile_in_zip_read_info->stream_initialised=1; + else + { + TRYFREE(pfile_in_zip_read_info); + return err; + } + /* windowBits is passed < 0 to tell that there is no zlib header. + * Note that in this case inflate *requires* an extra "dummy" byte + * after the compressed stream in order to complete decompression and + * return Z_STREAM_END. + * In unzip, i don't wait absolutely Z_STREAM_END because I known the + * size of both compressed and uncompressed data + */ + } + pfile_in_zip_read_info->rest_read_compressed = + s->cur_file_info.compressed_size ; + pfile_in_zip_read_info->rest_read_uncompressed = + s->cur_file_info.uncompressed_size ; -static void inflate_codes_free OF(( - inflate_codes_statef *, - z_streamp )); -/* infutil.h -- types and macros common to blocks and codes - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ + pfile_in_zip_read_info->pos_in_zipfile = + s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER + + iSizeVar; -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ + pfile_in_zip_read_info->stream.avail_in = (uInt)0; -#ifndef _INFUTIL_H -#define _INFUTIL_H - -typedef enum { - TYPE, /* get type bits (3, including end bit) */ - LENS, /* get lengths for stored */ - STORED, /* processing stored block */ - TABLE, /* get table lengths */ - BTREE, /* get bit lengths tree for a dynamic block */ - DTREE, /* get length, distance trees for a dynamic block */ - CODES, /* processing fixed or dynamic block */ - DRY, /* output remaining window bytes */ - DONE, /* finished last block, done */ - BAD} /* got a data error--stuck here */ -inflate_block_mode; - -/* inflate blocks semi-private state */ -struct inflate_blocks_state { - - /* mode */ - inflate_block_mode mode; /* current inflate_block mode */ - - /* mode dependent information */ - union { - uInt left; /* if STORED, bytes left to copy */ - struct { - uInt table; /* table lengths (14 bits) */ - uInt index; /* index into blens (or border) */ - uInt *blens; /* bit lengths of codes */ - uInt bb; /* bit length tree depth */ - inflate_huft *tb; /* bit length decoding tree */ - } trees; /* if DTREE, decoding info for trees */ - struct { - inflate_codes_statef - *codes; - } decode; /* if CODES, current state */ - } sub; /* submode */ - uInt last; /* true if this block is the last block */ - - /* mode independent information */ - uInt bitk; /* bits in bit buffer */ - uLong bitb; /* bit buffer */ - inflate_huft *hufts; /* single malloc for tree space */ - Byte *window; /* sliding window */ - Byte *end; /* one byte after sliding window */ - Byte *read; /* window read pointer */ - Byte *write; /* window write pointer */ - check_func checkfn; /* check function */ - uLong check; /* check on output */ - -}; - - -/* defines for inflate input/output */ -/* update pointers and return */ -#define UPDBITS {s->bitb=b;s->bitk=k;} -#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} -#define UPDOUT {s->write=q;} -#define UPDATE {UPDBITS UPDIN UPDOUT} -#define LEAVE {UPDATE return inflate_flush(s,z,r);} -/* get bytes and bits */ -#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} -#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} -#define NEXTBYTE (n--,*p++) -#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}} -#define DUMPBITS(j) {b>>=(j);k-=(j);} -/* output bytes */ -#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q) -#define LOADOUT {q=s->write;m=(uInt)WAVAIL;} -#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}} -#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} -#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} -#define OUTBYTE(a) {*q++=(Byte)(a);m--;} -/* load static pointers */ -#define LOAD {LOADIN LOADOUT} - -/* masks for lower bits (size given to avoid silly warnings with Visual C++) */ -static uInt inflate_mask[17]; - -/* copy as much as possible from the sliding window to the output area */ -static int inflate_flush OF(( - inflate_blocks_statef *, - z_streamp , - int)); + s->pfile_in_zip_read = pfile_in_zip_read_info; -#endif - - -/* - Notes beyond the 1.93a appnote.txt: - - 1. Distance pointers never point before the beginning of the output - stream. - 2. Distance pointers can point back across blocks, up to 32k away. - 3. There is an implied maximum of 7 bits for the bit length table and - 15 bits for the actual data. - 4. If only one code exists, then it is encoded using one bit. (Zero - would be more efficient, but perhaps a little confusing.) If two - codes exist, they are coded using one bit each (0 and 1). - 5. There is no way of sending zero distance codes--a dummy must be - sent if there are none. (History: a pre 2.0 version of PKZIP would - store blocks with no distance codes, but this was discovered to be - too harsh a criterion.) Valid only for 1.93a. 2.04c does allow - zero distance codes, which is sent as one code of zero bits in - length. - 6. There are up to 286 literal/length codes. Code 256 represents the - end-of-block. Note however that the static length tree defines - 288 codes just to fill out the Huffman codes. Codes 286 and 287 - cannot be used though, since there is no length base or extra bits - defined for them. Similarily, there are up to 30 distance codes. - However, static trees define 32 codes (all 5 bits) to fill out the - Huffman codes, but the last two had better not show up in the data. - 7. Unzip can check dynamic Huffman blocks for complete code sets. - The exception is that a single code would not be complete (see #4). - 8. The five bits following the block type is really the number of - literal codes sent minus 257. - 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits - (1+6+6). Therefore, to output three times the length, you output - three codes (1+1+1), whereas to output four times the same length, - you only need two codes (1+3). Hmm. - 10. In the tree reconstruction algorithm, Code = Code + Increment - only if BitLength(i) is not zero. (Pretty obvious.) - 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) - 12. Note: length code 284 can represent 227-258, but length code 285 - really is 258. The last length deserves its own, short code - since it gets used a lot in very redundant files. The length - 258 is special since 258 - 3 (the min match length) is 255. - 13. The literal/length and distance code bit lengths are read as a - single stream of lengths. It is possible (and advantageous) for - a repeat code (16, 17, or 18) to go across the boundary between - the two sets of lengths. - */ +# ifndef NOUNCRYPT + if (password != NULL) + { + int i; + s->pcrc_32_tab = get_crc_table(); + init_keys(password,s->keys,s->pcrc_32_tab); + if (ZSEEK(s->z_filefunc, s->filestream, + s->pfile_in_zip_read->pos_in_zipfile + + s->pfile_in_zip_read->byte_before_the_zipfile, + SEEK_SET)!=0) + return UNZ_INTERNALERROR; + if(ZREAD(s->z_filefunc, s->filestream,source, 12)<12) + return UNZ_INTERNALERROR; + + for (i = 0; i<12; i++) + zdecode(s->keys,s->pcrc_32_tab,source[i]); + + s->pfile_in_zip_read->pos_in_zipfile+=12; + s->encrypted=1; + } +# endif -void inflate_blocks_reset(inflate_blocks_statef *s, z_streamp z, uLong *c) -{ - if (c != Z_NULL) - *c = s->check; - if (s->mode == BTREE || s->mode == DTREE) - ZFREE(z, s->sub.trees.blens); - if (s->mode == CODES) - inflate_codes_free(s->sub.decode.codes, z); - s->mode = TYPE; - s->bitk = 0; - s->bitb = 0; - s->read = s->write = s->window; - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(0L, (const Byte *)Z_NULL, 0); - Tracev(("inflate: blocks reset\n")); + return UNZ_OK; } - -inflate_blocks_statef *inflate_blocks_new(z_streamp z, check_func c, uInt w) +extern int ZEXPORT unzOpenCurrentFile (file) + unzFile file; { - inflate_blocks_statef *s; - - if ((s = (inflate_blocks_statef *)ZALLOC - (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) - return s; - if ((s->hufts = - (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL) - { - ZFREE(z, s); - return Z_NULL; - } - if ((s->window = (Byte *)ZALLOC(z, 1, w)) == Z_NULL) - { - ZFREE(z, s->hufts); - ZFREE(z, s); - return Z_NULL; - } - s->end = s->window + w; - s->checkfn = c; - s->mode = TYPE; - Tracev(("inflate: blocks allocated\n")); - inflate_blocks_reset(s, z, Z_NULL); - return s; + return unzOpenCurrentFile3(file, NULL, NULL, 0, NULL); } - -int inflate_blocks(inflate_blocks_statef *s, z_streamp z, int r) +extern int ZEXPORT unzOpenCurrentFilePassword (file, password) + unzFile file; + const char* password; { - uInt t; /* temporary storage */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Byte *p; /* input data pointer */ - uInt n; /* bytes available there */ - Byte *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - - /* copy input/output information to locals (UPDATE macro restores) */ - LOAD - - /* process input based on current state */ - while (1) switch (s->mode) - { - case TYPE: - NEEDBITS(3) - t = (uInt)b & 7; - s->last = t & 1; - switch (t >> 1) - { - case 0: /* stored */ - Tracev(("inflate: stored block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - t = k & 7; /* go to byte boundary */ - DUMPBITS(t) - s->mode = LENS; /* get length of stored block */ - break; - case 1: /* fixed */ - Tracev(("inflate: fixed codes block%s\n", - s->last ? " (last)" : "")); - { - uInt bl, bd; - inflate_huft *tl, *td; - inflate_trees_fixed(&bl, &bd, &tl, &td, z); - s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); - if (s->sub.decode.codes == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - } - DUMPBITS(3) - s->mode = CODES; - break; - case 2: /* dynamic */ - Tracev(("inflate: dynamic codes block%s\n", - s->last ? " (last)" : "")); - DUMPBITS(3) - s->mode = TABLE; - break; - case 3: /* illegal */ - DUMPBITS(3) - s->mode = BAD; - z->msg = (char*)"invalid block type"; - r = Z_DATA_ERROR; - LEAVE - } - break; - case LENS: - NEEDBITS(32) - if ((((~b) >> 16) & 0xffff) != (b & 0xffff)) - { - s->mode = BAD; - z->msg = (char*)"invalid stored block lengths"; - r = Z_DATA_ERROR; - LEAVE - } - s->sub.left = (uInt)b & 0xffff; - b = k = 0; /* dump bits */ - Tracev(("inflate: stored length %u\n", s->sub.left)); - s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE); - break; - case STORED: - if (n == 0) - LEAVE - NEEDOUT - t = s->sub.left; - if (t > n) t = n; - if (t > m) t = m; - zmemcpy(q, p, t); - p += t; n -= t; - q += t; m -= t; - if ((s->sub.left -= t) != 0) - break; - Tracev(("inflate: stored end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - s->mode = s->last ? DRY : TYPE; - break; - case TABLE: - NEEDBITS(14) - s->sub.trees.table = t = (uInt)b & 0x3fff; -#ifndef PKZIP_BUG_WORKAROUND - if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) - { - s->mode = BAD; - z->msg = (char*)"too many length or distance symbols"; - r = Z_DATA_ERROR; - LEAVE - } -#endif - t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); - if ((s->sub.trees.blens = (uInt*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - DUMPBITS(14) - s->sub.trees.index = 0; - Tracev(("inflate: table sizes ok\n")); - s->mode = BTREE; - case BTREE: - while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) - { - NEEDBITS(3) - s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; - DUMPBITS(3) - } - while (s->sub.trees.index < 19) - s->sub.trees.blens[border[s->sub.trees.index++]] = 0; - s->sub.trees.bb = 7; - t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, - &s->sub.trees.tb, s->hufts, z); - if (t != Z_OK) - { - ZFREE(z, s->sub.trees.blens); - r = t; - if (r == Z_DATA_ERROR) - s->mode = BAD; - LEAVE - } - s->sub.trees.index = 0; - Tracev(("inflate: bits tree ok\n")); - s->mode = DTREE; - case DTREE: - while (t = s->sub.trees.table, - s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) - { - inflate_huft *h; - uInt i, j, c; - - t = s->sub.trees.bb; - NEEDBITS(t) - h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); - t = h->bits; - c = h->base; - if (c < 16) - { - DUMPBITS(t) - s->sub.trees.blens[s->sub.trees.index++] = c; - } - else /* c == 16..18 */ - { - i = c == 18 ? 7 : c - 14; - j = c == 18 ? 11 : 3; - NEEDBITS(t + i) - DUMPBITS(t) - j += (uInt)b & inflate_mask[i]; - DUMPBITS(i) - i = s->sub.trees.index; - t = s->sub.trees.table; - if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || - (c == 16 && i < 1)) - { - ZFREE(z, s->sub.trees.blens); - s->mode = BAD; - z->msg = (char*)"invalid bit length repeat"; - r = Z_DATA_ERROR; - LEAVE - } - c = c == 16 ? s->sub.trees.blens[i - 1] : 0; - do { - s->sub.trees.blens[i++] = c; - } while (--j); - s->sub.trees.index = i; - } - } - s->sub.trees.tb = Z_NULL; - { - uInt bl, bd; - inflate_huft *tl, *td; - inflate_codes_statef *c; - - tl = NULL; - td = NULL; - bl = 9; /* must be <= 9 for lookahead assumptions */ - bd = 6; /* must be <= 9 for lookahead assumptions */ - t = s->sub.trees.table; - t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), - s->sub.trees.blens, &bl, &bd, &tl, &td, - s->hufts, z); - ZFREE(z, s->sub.trees.blens); - if (t != Z_OK) - { - if (t == (uInt)Z_DATA_ERROR) - s->mode = BAD; - r = t; - LEAVE - } - Tracev(("inflate: trees ok\n")); - if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) - { - r = Z_MEM_ERROR; - LEAVE - } - s->sub.decode.codes = c; - } - s->mode = CODES; - case CODES: - UPDATE - if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) - return inflate_flush(s, z, r); - r = Z_OK; - inflate_codes_free(s->sub.decode.codes, z); - LOAD - Tracev(("inflate: codes end, %lu total out\n", - z->total_out + (q >= s->read ? q - s->read : - (s->end - s->read) + (q - s->window)))); - if (!s->last) - { - s->mode = TYPE; - break; - } - s->mode = DRY; - case DRY: - FLUSH - if (s->read != s->write) - LEAVE - s->mode = DONE; - case DONE: - r = Z_STREAM_END; - LEAVE - case BAD: - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } + return unzOpenCurrentFile3(file, NULL, NULL, 0, password); } - -int inflate_blocks_free(inflate_blocks_statef *s, z_streamp z) +extern int ZEXPORT unzOpenCurrentFile2 (file,method,level,raw) + unzFile file; + int* method; + int* level; + int raw; { - inflate_blocks_reset(s, z, Z_NULL); - ZFREE(z, s->window); - ZFREE(z, s->hufts); - ZFREE(z, s); - Tracev(("inflate: blocks freed\n")); - return Z_OK; + return unzOpenCurrentFile3(file, method, level, raw, NULL); } -#if 0 -void inflate_set_dictionary(inflate_blocks_statef *s, const Byte *d, uInt n) -{ - zmemcpy(s->window, d, n); - s->read = s->write = s->window + n; -} +/* + Read bytes from the current file. + buf contain buffer where data must be copied + len the size of buf. -/* Returns true if inflate is currently at the end of a block generated - * by Z_SYNC_FLUSH or Z_FULL_FLUSH. - * IN assertion: s != Z_NULL - */ -int inflate_blocks_sync_point(inflate_blocks_statef *s) + return the number of byte copied if somes bytes are copied + return 0 if the end of file was reached + return <0 with error code if there is an error + (UNZ_ERRNO for IO error, or zLib error for uncompress error) +*/ +extern int ZEXPORT unzReadCurrentFile (file, buf, len) + unzFile file; + voidp buf; + unsigned len; { - return s->mode == LENS; -} -#endif + int err=UNZ_OK; + uInt iRead = 0; + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; -/* And'ing with mask[n] masks the lower n bits */ -static uInt inflate_mask[17] = { - 0x0000, - 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, - 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff -}; + if ((pfile_in_zip_read_info->read_buffer == NULL)) + return UNZ_END_OF_LIST_OF_FILE; + if (len==0) + return 0; -/* copy as much as possible from the sliding window to the output area */ -int inflate_flush(inflate_blocks_statef *s, z_streamp z, int r) -{ - uInt n; - Byte *p; - Byte *q; - - /* static copies of source and destination pointers */ - p = z->next_out; - q = s->read; - - /* compute number of bytes to copy as as end of window */ - n = (uInt)((q <= s->write ? s->write : s->end) - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - /* update counters */ - z->avail_out -= n; - z->total_out += n; - - /* update check information */ - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(s->check, q, n); - - /* copy as as end of window */ - zmemcpy(p, q, n); - p += n; - q += n; - - /* see if more to copy at beginning of window */ - if (q == s->end) - { - /* wrap pointers */ - q = s->window; - if (s->write == s->end) - s->write = s->window; - - /* compute bytes to copy */ - n = (uInt)(s->write - q); - if (n > z->avail_out) n = z->avail_out; - if (n && r == Z_BUF_ERROR) r = Z_OK; - - /* update counters */ - z->avail_out -= n; - z->total_out += n; - - /* update check information */ - if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(s->check, q, n); - - /* copy */ - zmemcpy(p, q, n); - p += n; - q += n; - } - - /* update pointers */ - z->next_out = p; - s->read = q; - - /* done */ - return r; -} + pfile_in_zip_read_info->stream.next_out = (Bytef*)buf; -/* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ + pfile_in_zip_read_info->stream.avail_out = (uInt)len; -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ + if ((len>pfile_in_zip_read_info->rest_read_uncompressed) && + (!(pfile_in_zip_read_info->raw))) + pfile_in_zip_read_info->stream.avail_out = + (uInt)pfile_in_zip_read_info->rest_read_uncompressed; -/* simplify the use of the inflate_huft type with some defines */ -#define exop word.what.Exop -#define bits word.what.Bits - - -static int huft_build OF(( - uInt *, /* code lengths in bits */ - uInt, /* number of codes */ - uInt, /* number of "simple" codes */ - const uInt *, /* list of base values for non-simple codes */ - const uInt *, /* list of extra bits for non-simple codes */ - inflate_huft **, /* result: starting table */ - uInt *, /* maximum lookup bits (returns actual) */ - inflate_huft *, /* space for trees */ - uInt *, /* hufts used in space */ - uInt * )); /* space for values */ - -/* Tables for deflate from PKZIP's appnote.txt. */ -static const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - /* see note #13 above about 258 */ -static const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */ - 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, - 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */ -static const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577}; -static const uInt cpdext[30] = { /* Extra bits for distance codes */ - 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, - 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, - 12, 12, 13, 13}; + if ((len>pfile_in_zip_read_info->rest_read_compressed+ + pfile_in_zip_read_info->stream.avail_in) && + (pfile_in_zip_read_info->raw)) + pfile_in_zip_read_info->stream.avail_out = + (uInt)pfile_in_zip_read_info->rest_read_compressed+ + pfile_in_zip_read_info->stream.avail_in; -/* - Huffman code decoding is performed using a multi-level table lookup. - The fastest way to decode is to simply build a lookup table whose - size is determined by the longest code. However, the time it takes - to build this table can also be a factor if the data being decoded - is not very long. The most common codes are necessarily the - shortest codes, so those codes dominate the decoding time, and hence - the speed. The idea is you can have a shorter table that decodes the - shorter, more probable codes, and then point to subsidiary tables for - the longer codes. The time it costs to decode the longer codes is - then traded against the time it takes to make longer tables. - - This results of this trade are in the variables lbits and dbits - below. lbits is the number of bits the first level table for literal/ - length codes can decode in one step, and dbits is the same thing for - the distance codes. Subsequent tables are also less than or equal to - those sizes. These values may be adjusted either when all of the - codes are shorter than that, in which case the longest code length in - bits is used, or when the shortest code is *longer* than the requested - table size, in which case the length of the shortest code in bits is - used. - - There are two different values for the two tables, since they code a - different number of possibilities each. The literal/length table - codes 286 possible values, or in a flat code, a little over eight - bits. The distance table codes 30 possible values, or a little less - than five bits, flat. The optimum values for speed end up being - about one bit more than those, so lbits is 8+1 and dbits is 5+1. - The optimum values may differ though from machine to machine, and - possibly even between compilers. Your mileage may vary. - */ - - -/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ -#define BMAX 15 /* maximum bit length of any code */ - -static int huft_build(uInt *b, uInt n, uInt s, const uInt *d, const uInt *e, inflate_huft ** t, uInt *m, inflate_huft *hp, uInt *hn, uInt *v) -//uInt *b; /* code lengths in bits (all assumed <= BMAX) */ -//uInt n; /* number of codes (assumed <= 288) */ -//uInt s; /* number of simple-valued codes (0..s-1) */ -//const uInt *d; /* list of base values for non-simple codes */ -//const uInt *e; /* list of extra bits for non-simple codes */ -//inflate_huft ** t; /* result: starting table */ -//uInt *m; /* maximum lookup bits, returns actual */ -//inflate_huft *hp; /* space for trees */ -//uInt *hn; /* hufts used in space */ -//uInt *v; /* working area: values in order of bit length */ -/* Given a list of code lengths and a maximum table size, make a set of - tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR - if the given code set is incomplete (the tables are still built in this - case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of - lengths), or Z_MEM_ERROR if not enough memory. */ -{ - - uInt a; /* counter for codes of length k */ - uInt c[BMAX+1]; /* bit length count table */ - uInt f; /* i repeats in table every f entries */ - int g; /* maximum code length */ - int h; /* table level */ - register uInt i; /* counter, current code */ - register uInt j; /* counter */ - register int k; /* number of bits in current code */ - int l; /* bits per table (returned in m) */ - uInt mask; /* (1 << w) - 1, to avoid cc -O bug on HP */ - register uInt *p; /* pointer into c[], b[], or v[] */ - inflate_huft *q; /* points to current table */ - struct inflate_huft_s r = {{{0, 0}}}; /* table entry for structure assignment */ - inflate_huft *u[BMAX]; /* table stack */ - register int w; /* bits before this table == (l * h) */ - uInt x[BMAX+1]; /* bit offsets, then code stack */ - uInt *xp; /* pointer into x */ - int y; /* number of dummy codes added */ - uInt z; /* number of entries in current table */ - - - /* Generate counts for each bit length */ - p = c; -#define C0 *p++ = 0; -#define C2 C0 C0 C0 C0 -#define C4 C2 C2 C2 C2 - C4 /* clear c[]--assume BMAX+1 is 16 */ - p = b; i = n; - do { - c[*p++]++; /* assume all entries <= BMAX */ - } while (--i); - if (c[0] == n) /* null input--all zero length codes */ - { - *t = (inflate_huft *)Z_NULL; - *m = 0; - return Z_OK; - } - - - /* Find minimum and maximum length, bound *m by those */ - l = *m; - for (j = 1; j <= BMAX; j++) - if (c[j]) - break; - k = j; /* minimum code length */ - if ((uInt)l < j) - l = j; - for (i = BMAX; i; i--) - if (c[i]) - break; - g = i; /* maximum code length */ - if ((uInt)l > i) - l = i; - *m = l; - - - /* Adjust last length count to fill out codes, if needed */ - for (y = 1 << j; j < i; j++, y <<= 1) - if ((y -= c[j]) < 0) - return Z_DATA_ERROR; - if ((y -= c[i]) < 0) - return Z_DATA_ERROR; - c[i] += y; - - - /* Generate starting offsets into the value table for each length */ - x[1] = j = 0; - p = c + 1; xp = x + 2; - while (--i) { /* note that i == g from above */ - *xp++ = (j += *p++); - } - - - /* Make a table of values in order of bit lengths */ - p = b; i = 0; - do { - if ((j = *p++) != 0) - v[x[j]++] = i; - } while (++i < n); - n = x[g]; /* set n to length of v */ - - - /* Generate the Huffman codes and for each, make the table entries */ - x[0] = i = 0; /* first Huffman code is zero */ - p = v; /* grab values in bit order */ - h = -1; /* no tables yet--level -1 */ - w = -l; /* bits decoded == (l * h) */ - u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ - q = (inflate_huft *)Z_NULL; /* ditto */ - z = 0; /* ditto */ - - /* go through the bit lengths (k already is bits in shortest code) */ - for (; k <= g; k++) - { - a = c[k]; - while (a--) + while (pfile_in_zip_read_info->stream.avail_out>0) { - /* here i is the Huffman code of length k bits for value *p */ - /* make tables up to required level */ - while (k > w + l) - { - h++; - w += l; /* previous table always l bits */ - - /* compute minimum size table less than or equal to l bits */ - z = g - w; - z = z > (uInt)l ? l : z; /* table size upper limit */ - if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ - { /* too few codes for k-w bit table */ - f -= a + 1; /* deduct codes from patterns left */ - xp = c + k; - if (j < z) - while (++j < z) /* try smaller tables up to z bits */ + if ((pfile_in_zip_read_info->stream.avail_in==0) && + (pfile_in_zip_read_info->rest_read_compressed>0)) + { + uInt uReadThis = UNZ_BUFSIZE; + if (pfile_in_zip_read_info->rest_read_compressed<uReadThis) + uReadThis = (uInt)pfile_in_zip_read_info->rest_read_compressed; + if (uReadThis == 0) + return UNZ_EOF; + if (ZSEEK(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->pos_in_zipfile + + pfile_in_zip_read_info->byte_before_the_zipfile, + ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; + if (ZREAD(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->read_buffer, + uReadThis)!=uReadThis) + return UNZ_ERRNO; + + +# ifndef NOUNCRYPT + if(s->encrypted) { - if ((f <<= 1) <= *++xp) - break; /* enough codes to use up j bits */ - f -= *xp; /* else deduct codes from patterns */ + uInt i; + for(i=0;i<uReadThis;i++) + pfile_in_zip_read_info->read_buffer[i] = + zdecode(s->keys,s->pcrc_32_tab, + pfile_in_zip_read_info->read_buffer[i]); } - } - z = 1 << j; /* table entries for j-bit table */ +# endif + + + pfile_in_zip_read_info->pos_in_zipfile += uReadThis; - /* allocate new table */ - if (*hn + z > MANY) /* (note: doesn't matter for fixed) */ - return Z_MEM_ERROR; /* not enough memory */ - u[h] = q = hp + *hn; - *hn += z; + pfile_in_zip_read_info->rest_read_compressed-=uReadThis; - /* connect to last table, if there is one */ - if (h) + pfile_in_zip_read_info->stream.next_in = + (Bytef*)pfile_in_zip_read_info->read_buffer; + pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis; + } + + if ((pfile_in_zip_read_info->compression_method==0) || (pfile_in_zip_read_info->raw)) { - x[h] = i; /* save pattern for backing up */ - r.bits = (Byte)l; /* bits to dump before this table */ - r.exop = (Byte)j; /* bits in this table */ - j = i >> (w - l); - r.base = (uInt)(q - u[h-1] - j); /* offset to this table */ - u[h-1][j] = r; /* connect to last table */ + uInt uDoCopy,i ; + + if ((pfile_in_zip_read_info->stream.avail_in == 0) && + (pfile_in_zip_read_info->rest_read_compressed == 0)) + return (iRead==0) ? UNZ_EOF : iRead; + + if (pfile_in_zip_read_info->stream.avail_out < + pfile_in_zip_read_info->stream.avail_in) + uDoCopy = pfile_in_zip_read_info->stream.avail_out ; + else + uDoCopy = pfile_in_zip_read_info->stream.avail_in ; + + for (i=0;i<uDoCopy;i++) + *(pfile_in_zip_read_info->stream.next_out+i) = + *(pfile_in_zip_read_info->stream.next_in+i); + + pfile_in_zip_read_info->crc32 = crc32(pfile_in_zip_read_info->crc32, + pfile_in_zip_read_info->stream.next_out, + uDoCopy); + pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy; + pfile_in_zip_read_info->stream.avail_in -= uDoCopy; + pfile_in_zip_read_info->stream.avail_out -= uDoCopy; + pfile_in_zip_read_info->stream.next_out += uDoCopy; + pfile_in_zip_read_info->stream.next_in += uDoCopy; + pfile_in_zip_read_info->stream.total_out += uDoCopy; + iRead += uDoCopy; } else - *t = q; /* first table is returned result */ - } + { + uLong uTotalOutBefore,uTotalOutAfter; + const Bytef *bufBefore; + uLong uOutThis; + int flush=Z_SYNC_FLUSH; - /* set up table entry in r */ - r.bits = (Byte)(k - w); - if (p >= v + n) - r.exop = 128 + 64; /* out of values--invalid code */ - else if (*p < s) - { - r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ - r.base = *p++; /* simple code is just the value */ - } - else - { - r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */ - r.base = d[*p++ - s]; - } + uTotalOutBefore = pfile_in_zip_read_info->stream.total_out; + bufBefore = pfile_in_zip_read_info->stream.next_out; - /* fill code-like entries with r */ - f = 1 << (k - w); - for (j = i >> w; j < z; j += f) - q[j] = r; + /* + if ((pfile_in_zip_read_info->rest_read_uncompressed == + pfile_in_zip_read_info->stream.avail_out) && + (pfile_in_zip_read_info->rest_read_compressed == 0)) + flush = Z_FINISH; + */ + err=inflate(&pfile_in_zip_read_info->stream,flush); - /* backwards increment the k-bit code i */ - for (j = 1 << (k - 1); i & j; j >>= 1) - i ^= j; - i ^= j; + if ((err>=0) && (pfile_in_zip_read_info->stream.msg!=NULL)) + err = Z_DATA_ERROR; - /* backup over finished tables */ - mask = (1 << w) - 1; /* needed on HP, cc -O bug */ - while ((i & mask) != x[h]) - { - h--; /* don't need to update q */ - w -= l; - mask = (1 << w) - 1; - } - } - } + uTotalOutAfter = pfile_in_zip_read_info->stream.total_out; + uOutThis = uTotalOutAfter-uTotalOutBefore; + pfile_in_zip_read_info->crc32 = + crc32(pfile_in_zip_read_info->crc32,bufBefore, + (uInt)(uOutThis)); - /* Return Z_BUF_ERROR if we were given an incomplete table */ - return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; -} + pfile_in_zip_read_info->rest_read_uncompressed -= + uOutThis; + iRead += (uInt)(uTotalOutAfter - uTotalOutBefore); -int inflate_trees_bits(uInt *c, uInt *bb, inflate_huft * *tb, inflate_huft *hp, z_streamp z) -//uInt *c; /* 19 code lengths */ -//uInt *bb; /* bits tree desired/actual depth */ -//inflate_huft * *tb; /* bits tree result */ -//inflate_huft *hp; /* space for trees */ -//z_streamp z; /* for messages */ -{ - int r; - uInt hn = 0; /* hufts used in space */ - uInt *v; /* work area for huft_build */ - - if ((v = (uInt*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL) - return Z_MEM_ERROR; - r = huft_build(c, 19, 19, (uInt*)Z_NULL, (uInt*)Z_NULL, - tb, bb, hp, &hn, v); - if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed dynamic bit lengths tree"; - else if (r == Z_BUF_ERROR || *bb == 0) - { - z->msg = (char*)"incomplete dynamic bit lengths tree"; - r = Z_DATA_ERROR; - } - ZFREE(z, v); - return r; + if (err==Z_STREAM_END) + return (iRead==0) ? UNZ_EOF : iRead; + if (err!=Z_OK) + break; + } + } + + if (err==Z_OK) + return iRead; + return err; } -int inflate_trees_dynamic(uInt nl, uInt nd, uInt *c, uInt *bl, uInt *bd, inflate_huft * *tl, inflate_huft * *td, inflate_huft *hp, z_streamp z) -//uInt nl; /* number of literal/length codes */ -//uInt nd; /* number of distance codes */ -//uInt *c; /* that many (total) code lengths */ -//uInt *bl; /* literal desired/actual bit depth */ -//uInt *bd; /* distance desired/actual bit depth */ -//inflate_huft * *tl; /* literal/length tree result */ -//inflate_huft * *td; /* distance tree result */ -//inflate_huft *hp; /* space for trees */ -//z_streamp z; /* for messages */ +/* + Give the current position in uncompressed data +*/ +extern z_off_t ZEXPORT unztell (file) + unzFile file; { - int r; - uInt hn = 0; /* hufts used in space */ - uInt *v; /* work area for huft_build */ - - /* allocate work area */ - if ((v = (uInt*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL) - return Z_MEM_ERROR; - - /* build literal/length tree */ - r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v); - if (r != Z_OK || *bl == 0) - { - if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed literal/length tree"; - else if (r != Z_MEM_ERROR) - { - z->msg = (char*)"incomplete literal/length tree"; - r = Z_DATA_ERROR; - } - ZFREE(z, v); - return r; - } - - /* build distance tree */ - r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v); - if (r != Z_OK || (*bd == 0 && nl > 257)) - { - if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed distance tree"; - else if (r == Z_BUF_ERROR) { -#ifdef PKZIP_BUG_WORKAROUND - r = Z_OK; - } -#else - z->msg = (char*)"incomplete distance tree"; - r = Z_DATA_ERROR; - } - else if (r != Z_MEM_ERROR) - { - z->msg = (char*)"empty distance tree with lengths"; - r = Z_DATA_ERROR; - } - ZFREE(z, v); - return r; -#endif - } + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; - /* done */ - ZFREE(z, v); - return Z_OK; -} + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; -/* inffixed.h -- table for decoding fixed codes - * Generated automatically by the maketree.c program - */ + return (z_off_t)pfile_in_zip_read_info->stream.total_out; +} -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ -static uInt fixed_bl = 9; -static uInt fixed_bd = 5; -static inflate_huft fixed_tl[] = { - {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115}, - {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192}, - {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160}, - {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224}, - {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144}, - {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208}, - {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176}, - {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240}, - {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227}, - {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200}, - {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168}, - {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232}, - {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152}, - {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216}, - {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184}, - {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248}, - {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163}, - {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196}, - {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164}, - {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228}, - {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148}, - {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212}, - {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180}, - {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244}, - {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0}, - {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204}, - {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172}, - {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236}, - {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156}, - {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220}, - {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188}, - {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252}, - {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131}, - {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194}, - {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162}, - {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226}, - {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146}, - {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210}, - {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178}, - {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242}, - {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258}, - {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202}, - {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170}, - {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234}, - {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154}, - {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218}, - {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186}, - {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250}, - {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195}, - {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198}, - {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166}, - {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230}, - {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150}, - {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214}, - {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182}, - {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246}, - {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0}, - {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206}, - {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174}, - {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238}, - {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158}, - {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222}, - {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190}, - {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254}, - {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115}, - {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193}, - {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161}, - {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225}, - {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145}, - {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209}, - {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177}, - {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241}, - {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227}, - {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201}, - {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169}, - {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233}, - {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153}, - {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217}, - {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185}, - {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249}, - {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163}, - {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197}, - {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165}, - {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229}, - {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149}, - {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213}, - {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181}, - {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245}, - {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0}, - {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205}, - {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173}, - {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237}, - {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157}, - {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221}, - {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189}, - {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253}, - {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131}, - {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195}, - {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163}, - {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227}, - {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147}, - {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211}, - {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179}, - {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243}, - {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258}, - {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203}, - {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171}, - {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235}, - {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155}, - {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219}, - {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187}, - {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251}, - {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195}, - {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199}, - {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167}, - {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231}, - {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151}, - {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215}, - {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183}, - {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247}, - {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0}, - {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207}, - {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175}, - {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239}, - {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159}, - {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223}, - {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191}, - {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255} - }; -static inflate_huft fixed_td[] = { - {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097}, - {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385}, - {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193}, - {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577}, - {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145}, - {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577}, - {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289}, - {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577} - }; - -int inflate_trees_fixed(uInt *bl, uInt *bd, inflate_huft * *tl, inflate_huft * *td, z_streamp z) -//uInt *bl; /* literal desired/actual bit depth */ -//uInt *bd; /* distance desired/actual bit depth */ -//inflate_huft * *tl; /* literal/length tree result */ -//inflate_huft * *td; /* distance tree result */ -//z_streamp z; /* for memory allocation */ +/* + return 1 if the end of file was reached, 0 elsewhere +*/ +extern int ZEXPORT unzeof (file) + unzFile file; { - *bl = fixed_bl; - *bd = fixed_bd; - *tl = fixed_tl; - *td = fixed_td; - return Z_OK; -} + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; -/* simplify the use of the inflate_huft type with some defines */ -#define exop word.what.Exop -#define bits word.what.Bits + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; -/* macros for bit input with no checking and for returning unused bytes */ -#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}} -#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;} + if (pfile_in_zip_read_info->rest_read_uncompressed == 0) + return 1; + else + return 0; +} -/* Called with number of bytes left to write in window at least 258 - (the maximum string length) and number of input bytes available - at least ten. The ten bytes are six bytes for the longest length/ - distance pair plus four bytes for overloading the bit buffer. */ -static int inflate_fast(uInt bl, uInt bd, inflate_huft *tl, inflate_huft *td, inflate_blocks_statef *s, z_streamp z) -{ - inflate_huft *t; /* temporary pointer */ - uInt e; /* extra bits or operation */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Byte *p; /* input data pointer */ - uInt n; /* bytes available there */ - Byte *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - uInt ml; /* mask for literal/length tree */ - uInt md; /* mask for distance tree */ - uInt c; /* bytes to copy */ - uInt d; /* distance back to copy from */ - Byte *r; /* copy source pointer */ - - /* load input, output, bit values */ - LOAD - - /* initialize masks */ - ml = inflate_mask[bl]; - md = inflate_mask[bd]; - - /* do until not enough input or output space for fast loop */ - do { /* assume called with m >= 258 && n >= 10 */ - /* get literal/length code */ - GRABBITS(20) /* max bits for literal/length code */ - if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) - { - DUMPBITS(t->bits) - Tracevv((t->base >= 0x20 && t->base < 0x7f ? - "inflate: * literal '%c'\n" : - "inflate: * literal 0x%02x\n", t->base)); - *q++ = (Byte)t->base; - m--; - continue; - } - do { - DUMPBITS(t->bits) - if (e & 16) - { - /* get extra bits for length */ - e &= 15; - c = t->base + ((uInt)b & inflate_mask[e]); - DUMPBITS(e) - Tracevv(("inflate: * length %u\n", c)); - - /* decode distance base of block to copy */ - GRABBITS(15); /* max bits for distance code */ - e = (t = td + ((uInt)b & md))->exop; - do { - DUMPBITS(t->bits) - if (e & 16) - { - /* get extra bits to add to distance base */ - e &= 15; - GRABBITS(e) /* get extra bits (up to 13) */ - d = t->base + ((uInt)b & inflate_mask[e]); - DUMPBITS(e) - Tracevv(("inflate: * distance %u\n", d)); - - /* do the copy */ - m -= c; - if ((uInt)(q - s->window) >= d) /* offset before dest */ - { /* just copy */ - r = q - d; - *q++ = *r++; c--; /* minimum count is three, */ - *q++ = *r++; c--; /* so unroll loop a little */ - } - else /* else offset after destination */ - { - e = d - (uInt)(q - s->window); /* bytes from offset to end */ - r = s->end - e; /* pointer to offset */ - if (c > e) /* if source crosses, */ - { - c -= e; /* copy to end of window */ - do { - *q++ = *r++; - } while (--e); - r = s->window; /* copy rest from start of window */ - } - } - do { /* copy all or what's left */ - *q++ = *r++; - } while (--c); - break; - } - else if ((e & 64) == 0) - { - t += t->base; - e = (t += ((uInt)b & inflate_mask[e]))->exop; - } - else - { - z->msg = (char*)"invalid distance code"; - UNGRAB - UPDATE - return Z_DATA_ERROR; - } - } while (1); - break; - } - if ((e & 64) == 0) - { - t += t->base; - if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0) - { - DUMPBITS(t->bits) - Tracevv((t->base >= 0x20 && t->base < 0x7f ? - "inflate: * literal '%c'\n" : - "inflate: * literal 0x%02x\n", t->base)); - *q++ = (Byte)t->base; - m--; - break; - } - } - else if (e & 32) - { - Tracevv(("inflate: * end of block\n")); - UNGRAB - UPDATE - return Z_STREAM_END; - } - else - { - z->msg = (char*)"invalid literal/length code"; - UNGRAB - UPDATE - return Z_DATA_ERROR; - } - } while (1); - } while (m >= 258 && n >= 10); - /* not enough input or output--restore pointers and return */ - UNGRAB - UPDATE - return Z_OK; -} +/* + Read extra field from the current file (opened by unzOpenCurrentFile) + This is the local-header version of the extra field (sometimes, there is + more info in the local-header version than in the central-header) -/* infcodes.c -- process literals and length/distance pairs - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ + if buf==NULL, it return the size of the local extra field that can be read -/* simplify the use of the inflate_huft type with some defines */ -#define exop word.what.Exop -#define bits word.what.Bits - -typedef enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ - START, /* x: set up for LEN */ - LEN, /* i: get length/literal/eob next */ - LENEXT, /* i: getting length extra (have base) */ - DIST, /* i: get distance next */ - DISTEXT, /* i: getting distance extra */ - COPY, /* o: copying bytes in window, waiting for space */ - LIT, /* o: got literal, waiting for output space */ - WASH, /* o: got eob, possibly still output waiting */ - END, /* x: got eob and all data flushed */ - BADCODE} /* x: got error */ -inflate_codes_mode; - -/* inflate codes private state */ -struct inflate_codes_state { - - /* mode */ - inflate_codes_mode mode; /* current inflate_codes mode */ - - /* mode dependent information */ - uInt len; - union { - struct { - inflate_huft *tree; /* pointer into tree */ - uInt need; /* bits needed */ - } code; /* if LEN or DIST, where in tree */ - uInt lit; /* if LIT, literal */ - struct { - uInt get; /* bits to get for extra */ - uInt dist; /* distance back to copy from */ - } copy; /* if EXT or COPY, where and how much */ - } sub; /* submode */ - - /* mode independent information */ - Byte lbits; /* ltree bits decoded per branch */ - Byte dbits; /* dtree bits decoder per branch */ - inflate_huft *ltree; /* literal/length/eob tree */ - inflate_huft *dtree; /* distance tree */ - -}; - - -inflate_codes_statef *inflate_codes_new(uInt bl, uInt bd, inflate_huft *tl, inflate_huft *td, z_streamp z) + if buf!=NULL, len is the size of the buffer, the extra header is copied in + buf. + the return value is the number of bytes copied in buf, or (if <0) + the error code +*/ +extern int ZEXPORT unzGetLocalExtrafield (file,buf,len) + unzFile file; + voidp buf; + unsigned len; { - inflate_codes_statef *c; - - if ((c = (inflate_codes_statef *) - ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) - { - c->mode = START; - c->lbits = (Byte)bl; - c->dbits = (Byte)bd; - c->ltree = tl; - c->dtree = td; - Tracev(("inflate: codes new\n")); - } - return c; -} + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + uInt read_now; + uLong size_to_read; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; -int inflate_codes(inflate_blocks_statef *s, z_streamp z, int r) -{ - uInt j; /* temporary storage */ - inflate_huft *t; /* temporary pointer */ - uInt e; /* extra bits or operation */ - uLong b; /* bit buffer */ - uInt k; /* bits in bit buffer */ - Byte *p; /* input data pointer */ - uInt n; /* bytes available there */ - Byte *q; /* output window write pointer */ - uInt m; /* bytes to end of window or read pointer */ - Byte *f; /* pointer to copy strings from */ - inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ - - /* copy input/output information to locals (UPDATE macro restores) */ - LOAD - - /* process input and output based on current state */ - while (1) switch (c->mode) - { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ - case START: /* x: set up for LEN */ -#ifndef SLOW - if (m >= 258 && n >= 10) - { - UPDATE - r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); - LOAD - if (r != Z_OK) - { - c->mode = r == Z_STREAM_END ? WASH : BADCODE; - break; - } - } -#endif /* !SLOW */ - c->sub.code.need = c->lbits; - c->sub.code.tree = c->ltree; - c->mode = LEN; - case LEN: /* i: get length/literal/eob next */ - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e == 0) /* literal */ - { - c->sub.lit = t->base; - Tracevv((t->base >= 0x20 && t->base < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", t->base)); - c->mode = LIT; - break; - } - if (e & 16) /* length */ - { - c->sub.copy.get = e & 15; - c->len = t->base; - c->mode = LENEXT; - break; - } - if ((e & 64) == 0) /* next table */ - { - c->sub.code.need = e; - c->sub.code.tree = t + t->base; - break; - } - if (e & 32) /* end of block */ - { - Tracevv(("inflate: end of block\n")); - c->mode = WASH; - break; - } - c->mode = BADCODE; /* invalid code */ - z->msg = (char*)"invalid literal/length code"; - r = Z_DATA_ERROR; - LEAVE - case LENEXT: /* i: getting length extra (have base) */ - j = c->sub.copy.get; - NEEDBITS(j) - c->len += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - c->sub.code.need = c->dbits; - c->sub.code.tree = c->dtree; - Tracevv(("inflate: length %u\n", c->len)); - c->mode = DIST; - case DIST: /* i: get distance next */ - j = c->sub.code.need; - NEEDBITS(j) - t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); - DUMPBITS(t->bits) - e = (uInt)(t->exop); - if (e & 16) /* distance */ - { - c->sub.copy.get = e & 15; - c->sub.copy.dist = t->base; - c->mode = DISTEXT; - break; - } - if ((e & 64) == 0) /* next table */ - { - c->sub.code.need = e; - c->sub.code.tree = t + t->base; - break; - } - c->mode = BADCODE; /* invalid code */ - z->msg = (char*)"invalid distance code"; - r = Z_DATA_ERROR; - LEAVE - case DISTEXT: /* i: getting distance extra */ - j = c->sub.copy.get; - NEEDBITS(j) - c->sub.copy.dist += (uInt)b & inflate_mask[j]; - DUMPBITS(j) - Tracevv(("inflate: distance %u\n", c->sub.copy.dist)); - c->mode = COPY; - case COPY: /* o: copying bytes in window, waiting for space */ -#ifndef __TURBOC__ /* Turbo C bug for following expression */ - f = (uInt)(q - s->window) < c->sub.copy.dist ? - s->end - (c->sub.copy.dist - (q - s->window)) : - q - c->sub.copy.dist; -#else - f = q - c->sub.copy.dist; - if ((uInt)(q - s->window) < c->sub.copy.dist) - f = s->end - (c->sub.copy.dist - (uInt)(q - s->window)); -#endif - while (c->len) - { - NEEDOUT - OUTBYTE(*f++) - if (f == s->end) - f = s->window; - c->len--; - } - c->mode = START; - break; - case LIT: /* o: got literal, waiting for output space */ - NEEDOUT - OUTBYTE(c->sub.lit) - c->mode = START; - break; - case WASH: /* o: got eob, possibly more output */ - if (k > 7) /* return unused byte, if any */ - { - Assert(k < 16, "inflate_codes grabbed too many bytes") - k -= 8; - n++; - p--; /* can always return one */ - } - FLUSH - if (s->read != s->write) - LEAVE - c->mode = END; - case END: - r = Z_STREAM_END; - LEAVE - case BADCODE: /* x: got error */ - r = Z_DATA_ERROR; - LEAVE - default: - r = Z_STREAM_ERROR; - LEAVE - } -#ifdef NEED_DUMMY_RETURN - return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ -#endif -} + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; + size_to_read = (pfile_in_zip_read_info->size_local_extrafield - + pfile_in_zip_read_info->pos_local_extrafield); -void inflate_codes_free(inflate_codes_statef *c, z_streamp z) -{ - ZFREE(z, c); - Tracev(("inflate: codes free\n")); -} + if (buf==NULL) + return (int)size_to_read; -/* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ + if (len>size_to_read) + read_now = (uInt)size_to_read; + else + read_now = (uInt)len ; -#define BASE 65521L /* largest prime smaller than 65536 */ -#define NMAX 5552 -/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ + if (read_now==0) + return 0; -#undef DO1 -#undef DO2 -#undef DO4 -#undef DO8 + if (ZSEEK(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + pfile_in_zip_read_info->offset_local_extrafield + + pfile_in_zip_read_info->pos_local_extrafield, + ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; -#define DO1(buf,i) {s1 += buf[i]; s2 += s1;} -#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); -#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); -#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); -#define DO16(buf) DO8(buf,0); DO8(buf,8); + if (ZREAD(pfile_in_zip_read_info->z_filefunc, + pfile_in_zip_read_info->filestream, + buf,read_now)!=read_now) + return UNZ_ERRNO; -/* ========================================================================= */ -static uLong adler32(uLong adler, const Byte *buf, uInt len) -{ - unsigned long s1 = adler & 0xffff; - unsigned long s2 = (adler >> 16) & 0xffff; - int k; - - if (buf == Z_NULL) return 1L; - - while (len > 0) { - k = len < NMAX ? len : NMAX; - len -= k; - while (k >= 16) { - DO16(buf); - buf += 16; - k -= 16; - } - if (k != 0) do { - s1 += *buf++; - s2 += s1; - } while (--k); - s1 %= BASE; - s2 %= BASE; - } - return (s2 << 16) | s1; + return (int)read_now; } +/* + Close the file in zip opened with unzipOpenCurrentFile + Return UNZ_CRCERROR if all the file was read but the CRC is not good +*/ +extern int ZEXPORT unzCloseCurrentFile (file) + unzFile file; +{ + int err=UNZ_OK; -/* infblock.h -- header to use infblock.c - * Copyright (C) 1995-1998 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ + unz_s* s; + file_in_zip_read_info_s* pfile_in_zip_read_info; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + pfile_in_zip_read_info=s->pfile_in_zip_read; -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ + if (pfile_in_zip_read_info==NULL) + return UNZ_PARAMERROR; -static inflate_blocks_statef * inflate_blocks_new OF(( - z_streamp z, - check_func c, /* check function */ - uInt w)); /* window size */ - -static int inflate_blocks OF(( - inflate_blocks_statef *, - z_streamp , - int)); /* initial return code */ - -static void inflate_blocks_reset OF(( - inflate_blocks_statef *, - z_streamp , - uLong *)); /* check value on output */ - -static int inflate_blocks_free OF(( - inflate_blocks_statef *, - z_streamp)); - -#if 0 -static void inflate_set_dictionary OF(( - inflate_blocks_statef *s, - const Byte *d, /* dictionary */ - uInt n)); /* dictionary length */ - -static int inflate_blocks_sync_point OF(( - inflate_blocks_statef *s)); -#endif -typedef enum { - imMETHOD, /* waiting for method byte */ - imFLAG, /* waiting for flag byte */ - imDICT4, /* four dictionary check bytes to go */ - imDICT3, /* three dictionary check bytes to go */ - imDICT2, /* two dictionary check bytes to go */ - imDICT1, /* one dictionary check byte to go */ - imDICT0, /* waiting for inflateSetDictionary */ - imBLOCKS, /* decompressing blocks */ - imCHECK4, /* four check bytes to go */ - imCHECK3, /* three check bytes to go */ - imCHECK2, /* two check bytes to go */ - imCHECK1, /* one check byte to go */ - imDONE, /* finished check, done */ - imBAD} /* got an error--stay here */ -inflate_mode; - -/* inflate private state */ -struct internal_state { - - /* mode */ - inflate_mode mode; /* current inflate mode */ - - /* mode dependent information */ - union { - uInt method; /* if FLAGS, method byte */ - struct { - uLong was; /* computed check value */ - uLong need; /* stream check value */ - } check; /* if CHECK, check values to compare */ - uInt marker; /* if BAD, inflateSync's marker bytes count */ - } sub; /* submode */ - - /* mode independent information */ - int nowrap; /* flag for no wrapper */ - uInt wbits; /* log2(window size) (8..15, defaults to 15) */ - inflate_blocks_statef - *blocks; /* current inflate_blocks state */ - -}; - - -int inflateReset(z_streamp z) -{ - if (z == Z_NULL || z->state == Z_NULL) - return Z_STREAM_ERROR; - z->total_in = z->total_out = 0; - z->msg = Z_NULL; - z->state->mode = z->state->nowrap ? imBLOCKS : imMETHOD; - inflate_blocks_reset(z->state->blocks, z, Z_NULL); - Tracev(("inflate: reset\n")); - return Z_OK; -} + if ((pfile_in_zip_read_info->rest_read_uncompressed == 0) && + (!pfile_in_zip_read_info->raw)) + { + if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait) + err=UNZ_CRCERROR; + } -int inflateEnd(z_streamp z) -{ - if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) - return Z_STREAM_ERROR; - if (z->state->blocks != Z_NULL) - inflate_blocks_free(z->state->blocks, z); - ZFREE(z, z->state); - z->state = Z_NULL; - Tracev(("inflate: end\n")); - return Z_OK; -} + TRYFREE(pfile_in_zip_read_info->read_buffer); + pfile_in_zip_read_info->read_buffer = NULL; + if (pfile_in_zip_read_info->stream_initialised) + inflateEnd(&pfile_in_zip_read_info->stream); + pfile_in_zip_read_info->stream_initialised = 0; + TRYFREE(pfile_in_zip_read_info); + s->pfile_in_zip_read=NULL; -int inflateInit2_(z_streamp z, int w, const char *version, int stream_size) -{ - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || - stream_size != sizeof(z_stream)) - return Z_VERSION_ERROR; - - /* initialize state */ - if (z == Z_NULL) - return Z_STREAM_ERROR; - z->msg = Z_NULL; - if (z->zalloc == Z_NULL) - { - z->zalloc = (void *(*)(void *, unsigned, unsigned))zcalloc; - z->opaque = (voidp)0; - } - if (z->zfree == Z_NULL) z->zfree = (void (*)(void *, void *))zcfree; - if ((z->state = (struct internal_state *) - ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) - return Z_MEM_ERROR; - z->state->blocks = Z_NULL; - - /* handle undocumented nowrap option (no zlib header or check) */ - z->state->nowrap = 0; - if (w < 0) - { - w = - w; - z->state->nowrap = 1; - } - - /* set window size */ - if (w < 8 || w > 15) - { - inflateEnd(z); - return Z_STREAM_ERROR; - } - z->state->wbits = (uInt)w; - - /* create inflate_blocks state */ - if ((z->state->blocks = - inflate_blocks_new(z, z->state->nowrap ? ((check_func)0) : adler32, (uInt)1 << w)) - == Z_NULL) - { - inflateEnd(z); - return Z_MEM_ERROR; - } - Tracev(("inflate: allocated\n")); - - /* reset state */ - inflateReset(z); - return Z_OK; + return err; } -#if 0 -int inflateInit_(z_streamp z, const char *version, int stream_size) + +/* + Get the global comment string of the ZipFile, in the szComment buffer. + uSizeBuf is the size of the szComment buffer. + return the number of byte copied or an error code <0 +*/ +extern int ZEXPORT unzGetGlobalComment (file, szComment, uSizeBuf) + unzFile file; + char *szComment; + uLong uSizeBuf; { - return inflateInit2_(z, DEF_WBITS, version, stream_size); -} -#endif + unz_s* s; + uLong uReadThis ; + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; -#define iNEEDBYTE {if(z->avail_in==0)return r;r=f;} -#define iNEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) + uReadThis = uSizeBuf; + if (uReadThis>s->gi.size_comment) + uReadThis = s->gi.size_comment; -int inflate(z_streamp z, int f) -{ - int r; - uInt b; - - if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL) - return Z_STREAM_ERROR; - f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK; - r = Z_BUF_ERROR; - while (1) switch (z->state->mode) - { - case imMETHOD: - iNEEDBYTE - if (((z->state->sub.method = iNEXTBYTE) & 0xf) != Z_DEFLATED) - { - z->state->mode = imBAD; - z->msg = (char*)"unknown compression method"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - if ((z->state->sub.method >> 4) + 8 > z->state->wbits) - { - z->state->mode = imBAD; - z->msg = (char*)"invalid window size"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - z->state->mode = imFLAG; - case imFLAG: - iNEEDBYTE - b = iNEXTBYTE; - if (((z->state->sub.method << 8) + b) % 31) - { - z->state->mode = imBAD; - z->msg = (char*)"incorrect header check"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - Tracev(("inflate: zlib header ok\n")); - if (!(b & PRESET_DICT)) - { - z->state->mode = imBLOCKS; - break; - } - z->state->mode = imDICT4; - case imDICT4: - iNEEDBYTE - z->state->sub.check.need = (uLong)iNEXTBYTE << 24; - z->state->mode = imDICT3; - case imDICT3: - iNEEDBYTE - z->state->sub.check.need += (uLong)iNEXTBYTE << 16; - z->state->mode = imDICT2; - case imDICT2: - iNEEDBYTE - z->state->sub.check.need += (uLong)iNEXTBYTE << 8; - z->state->mode = imDICT1; - case imDICT1: - iNEEDBYTE - z->state->sub.check.need += (uLong)iNEXTBYTE; - z->adler = z->state->sub.check.need; - z->state->mode = imDICT0; - return Z_NEED_DICT; - case imDICT0: - z->state->mode = imBAD; - z->msg = (char*)"need dictionary"; - z->state->sub.marker = 0; /* can try inflateSync */ - return Z_STREAM_ERROR; - case imBLOCKS: - r = inflate_blocks(z->state->blocks, z, r); - if (r == Z_DATA_ERROR) - { - z->state->mode = imBAD; - z->state->sub.marker = 0; /* can try inflateSync */ - break; - } - if (r == Z_OK) - r = f; - if (r != Z_STREAM_END) - return r; - r = f; - inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); - if (z->state->nowrap) - { - z->state->mode = imDONE; - break; - } - z->state->mode = imCHECK4; - case imCHECK4: - iNEEDBYTE - z->state->sub.check.need = (uLong)iNEXTBYTE << 24; - z->state->mode = imCHECK3; - case imCHECK3: - iNEEDBYTE - z->state->sub.check.need += (uLong)iNEXTBYTE << 16; - z->state->mode = imCHECK2; - case imCHECK2: - iNEEDBYTE - z->state->sub.check.need += (uLong)iNEXTBYTE << 8; - z->state->mode = imCHECK1; - case imCHECK1: - iNEEDBYTE - z->state->sub.check.need += (uLong)iNEXTBYTE; - - if (z->state->sub.check.was != z->state->sub.check.need) - { - z->state->mode = imBAD; - z->msg = (char*)"incorrect data check"; - z->state->sub.marker = 5; /* can't try inflateSync */ - break; - } - Tracev(("inflate: zlib check ok\n")); - z->state->mode = imDONE; - case imDONE: - return Z_STREAM_END; - case imBAD: - return Z_DATA_ERROR; - default: - return Z_STREAM_ERROR; - } -#ifdef NEED_DUMMY_RETURN - return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ -#endif -} + if (ZSEEK(s->z_filefunc,s->filestream,s->central_pos+22,ZLIB_FILEFUNC_SEEK_SET)!=0) + return UNZ_ERRNO; -// defined but not used -#if 0 -int inflateSetDictionary(z_streamp z, const Byte *dictionary, uInt dictLength) -{ - uInt length = dictLength; - - if (z == Z_NULL || z->state == Z_NULL || z->state->mode != imDICT0) - return Z_STREAM_ERROR; - - if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR; - z->adler = 1L; - - if (length >= ((uInt)1<<z->state->wbits)) - { - length = (1<<z->state->wbits)-1; - dictionary += dictLength - length; - } - inflate_set_dictionary(z->state->blocks, dictionary, length); - z->state->mode = imBLOCKS; - return Z_OK; -} + if (uReadThis>0) + { + *szComment='\0'; + if (ZREAD(s->z_filefunc,s->filestream,szComment,uReadThis)!=uReadThis) + return UNZ_ERRNO; + } -int inflateSync(z_streamp z) -{ - uInt n; /* number of bytes to look at */ - Byte *p; /* pointer to bytes */ - uInt m; /* number of marker bytes found in a row */ - uLong r, w; /* temporaries to save total_in and total_out */ - - /* set up */ - if (z == Z_NULL || z->state == Z_NULL) - return Z_STREAM_ERROR; - if (z->state->mode != imBAD) - { - z->state->mode = imBAD; - z->state->sub.marker = 0; - } - if ((n = z->avail_in) == 0) - return Z_BUF_ERROR; - p = z->next_in; - m = z->state->sub.marker; - - /* search */ - while (n && m < 4) - { - static const Byte mark[4] = {0, 0, 0xff, 0xff}; - if (*p == mark[m]) - m++; - else if (*p) - m = 0; - else - m = 4 - m; - p++, n--; - } - - /* restore */ - z->total_in += p - z->next_in; - z->next_in = p; - z->avail_in = n; - z->state->sub.marker = m; - - /* return no joy or set up to restart on a new block */ - if (m != 4) - return Z_DATA_ERROR; - r = z->total_in; w = z->total_out; - inflateReset(z); - z->total_in = r; z->total_out = w; - z->state->mode = imBLOCKS; - return Z_OK; + if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment)) + *(szComment+s->gi.size_comment)='\0'; + return (int)uReadThis; } -/* Returns true if inflate is currently at the end of a block generated - * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP - * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH - * but removes the length bytes of the resulting empty stored block. When - * decompressing, PPP checks that at the end of input packet, inflate is - * waiting for these length bytes. - */ -int inflateSyncPoint(z_streamp z) +/* Additions by RX '2004 */ +extern uLong ZEXPORT unzGetOffset (file) + unzFile file; { - if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL) - return Z_STREAM_ERROR; - return inflate_blocks_sync_point(z->state->blocks); + unz_s* s; + + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + if (!s->current_file_ok) + return 0; + if (s->gi.number_entry != 0 && s->gi.number_entry != 0xffff) + if (s->num_file==s->gi.number_entry) + return 0; + return s->pos_in_central_dir; } -#endif -voidp zcalloc (voidp opaque, unsigned items, unsigned size) +extern int ZEXPORT unzSetOffset (file, pos) + unzFile file; + uLong pos; { - if (opaque) items += size - size; /* make compiler happy */ - return (voidp)Z_Malloc(items*size); -} + unz_s* s; + int err; -void zcfree (voidp opaque, voidp ptr) -{ - Z_Free(ptr); - if (opaque) return; /* make compiler happy */ + if (file==NULL) + return UNZ_PARAMERROR; + s=(unz_s*)file; + + s->pos_in_central_dir = pos; + s->num_file = s->gi.number_entry; /* hack */ + err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info, + &s->cur_file_info_internal, + NULL,0,NULL,0,NULL,0); + s->current_file_ok = (err == UNZ_OK); + return err; } - - |