## Specific Design Goals and Requirements

**A standard Linux server environment** for hosting applications, meaning that
web applications and most daemons (eg, appropriate to run on a single VPS) do
not have to be specifically re-ported to run on rooter.

**Simultaneous 200Mbps down, 109Mbps up routed ethernet throughput** between
local and remote ports. This performance ensures that rooter would not limit
the performance of [DOCSIS 3.0](https://en.wikipedia.org/wiki/DOCSIS#Speed_tables)
cable modem connections.

**"No-surprises" generic router functionality**, meaning that the device should
meet the expectations of non-technical users in it's default configuration:
standard firewall configuration, DHCP and DNS auto-configuration, support for
common upstream authentication mechanisms, configuration via a web interface at
the gateway's IP address.

**Hardware Hackability**, a vague concept. In this case meaning (at a minimum)
that new firmware can loaded and debugged on the device, and that low-level
electronics can be integrated using standard connections (3.3/5v GPIOs, UARTS,
SPI, ADCs, etc).

Ability to **participate in alternative networks** like wireless mesh networks
(BATMAN, OLSR, etc), darknets (i2p), or Tor without excessive difficulty. This
may require some network-specific porting and may contra-indicate some other 

**"Line-rate" WiFi routed throughput** (to local or upstream ethernet ports).
For 802.11n this means 150Mbps for a single 40MHz channel.

**IPv6 fully supported out-of-the-box.**

**"No-reboot" reliability** under defaults with "normal usage", meaning that end
users should never have to manually power cycle the device to resolve local or
uplink DHCP or routing connectivity issues.

**No NDAs, special vendor deals, or binary blobs.** A mostly free/libre
software and hardware stack, reproducable by anybody with capital and
manufacturing facilities.

**"Internet-of-Things" connectivity** via a low-power IP-based wireless
protocol (eg 802.15.4 6lowpan, ZigBee, Bluetooth Low-Energy, etc).

## Hardware features

See [design/hardware]() for specific components and costs.

- 1GHz dual-core ARM SoC processor
- 512MB+ RAM
- Internal uSD card storage, expandable through SATA and USB ports
- Modular WiFI via miniPCIe slot
- Second USB-only miniPCIe slot for expansion
- 2+ powered USB ports for expansion
- 5x Gigabit ethernet ports: 4x local + 1x upstream
- Serial and JTAG debugging via USB port
- Low-power "internet of things" gateway with 802.15.4 radio 
- Hardware entropy generation device

## Comparison

<table>
 <tr>
  <th>Device
  <th>Price (est.)
  <th>CPU/RAM/Disk
  <th>Ethernet Ports
  <th>Router?
  <th>Server?
  <th>Libre?
  <th>Hack?
 <tr>
  <td>rooter
  <td>$175
  <td>dual 1GHz ARM / 512MB / 8Gb uSD
  <td>5x 1000Mbps
  <td>Yes
  <td>Yes
  <td>Yes
  <td>Yes
 <tr>
  <td>FreedomBox (DreamPlug)
  <td>$180
  <td>
  <td>
  <td>
 <tr>
  <td>Raspberry Pi
  <td>$35
  <td>
  <td>
  <td>
 <tr>
  <td>Netgear N600 Router
  <td>$90
  <td>
  <td>
  <td>
 <tr>
  <td>Soekris net6501
  <td>$300+
  <td>
  <td>
  <td>
 <tr>
  <td>Mesh Potato
  <td>$100
  <td>
  <td>
</table>