aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c
blob: b728c8745da363ccb802d8d1e9b0f981a34b9c29 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
/*
 *  linux/drivers/mmc/host/glamo-mmc.c - Glamo MMC driver
 *
 *  Copyright (C) 2007 Openmoko, Inc,  Andy Green <andy@openmoko.com>
 *  Based on S3C MMC driver that was:
 *  Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/module.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/sd.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/crc7.h>
#include <linux/scatterlist.h>
#include <linux/io.h>
#include <linux/regulator/consumer.h>
#include <linux/mfd/glamo.h>

#include "glamo-core.h"
#include "glamo-regs.h"

#define DRIVER_NAME "glamo-mci"

struct glamo_mci_host {
	struct glamo_mmc_platform_data *pdata;
	struct platform_device *pdev;
	struct glamo_core      *core;
	struct mmc_host        *mmc;
	struct resource        *mmio_mem;
	struct resource        *data_mem;
	void __iomem           *mmio_base;
	u16 __iomem            *data_base;

	struct regulator *regulator;
	struct mmc_request *mrq;

	unsigned int clk_rate;

	unsigned short vdd;
	char           power_mode;

	unsigned char request_counter;

	struct timer_list disable_timer;

	struct work_struct irq_work;
	struct work_struct read_work;

	unsigned clk_enabled : 1;

};

static void glamo_mci_send_request(struct mmc_host *mmc, struct mmc_request* mrq);
static void glamo_mci_send_command(struct glamo_mci_host *host,
				  struct mmc_command *cmd);

/*
 * Max SD clock rate
 *
 * held at /(3 + 1) due to concerns of 100R recommended series resistor
 * allows 16MHz @ 4-bit --> 8MBytes/sec raw
 *
 * you can override this on kernel commandline using
 *
 *   glamo_mci.sd_max_clk=10000000
 *
 * for example
 */

static int sd_max_clk = 21000000;
module_param(sd_max_clk, int, 0644);

/*
 * Slow SD clock rate
 *
 * you can override this on kernel commandline using
 *
 *   glamo_mci.sd_slow_ratio=8
 *
 * for example
 *
 * platform callback is used to decide effective clock rate, if not
 * defined then max is used, if defined and returns nonzero, rate is
 * divided by this factor
 */

static int sd_slow_ratio = 8;
module_param(sd_slow_ratio, int, 0644);

/*
 * Post-power SD clock rate
 *
 * you can override this on kernel commandline using
 *
 *   glamo_mci.sd_post_power_clock=1000000
 *
 * for example
 *
 * After changing power to card, clock is held at this rate until first bulk
 * transfer completes
 */

static int sd_post_power_clock = 1000000;
module_param(sd_post_power_clock, int, 0644);


static inline void glamo_reg_write(struct glamo_mci_host *glamo,
				u_int16_t reg, u_int16_t val)
{
	writew(val, glamo->mmio_base + reg);
}

static inline u_int16_t glamo_reg_read(struct glamo_mci_host *glamo,
				   u_int16_t reg)
{
	return readw(glamo->mmio_base + reg);
}

static void glamo_reg_set_bit_mask(struct glamo_mci_host *glamo,
				u_int16_t reg, u_int16_t mask,
				u_int16_t val)
{
	u_int16_t tmp;

	val &= mask;

	tmp = glamo_reg_read(glamo, reg);
	tmp &= ~mask;
	tmp |= val;
	glamo_reg_write(glamo, reg, tmp);
}

static void glamo_mci_clock_disable(struct glamo_mci_host *host) {
	if (host->clk_enabled) {
		glamo_engine_div_disable(host->core, GLAMO_ENGINE_MMC);
		host->clk_enabled = 0;
	}
}

static void glamo_mci_clock_enable(struct glamo_mci_host *host) {
	del_timer_sync(&host->disable_timer);

	if (!host->clk_enabled) {
		glamo_engine_div_enable(host->core, GLAMO_ENGINE_MMC);
		host->clk_enabled = 1;
	}
}

static void glamo_mci_disable_timer(unsigned long data) {
	struct glamo_mci_host *host = (struct glamo_mci_host *)data;
	glamo_mci_clock_disable(host);
}


static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data)
{
	struct scatterlist *sg;
	u16 __iomem *from_ptr = host->data_base;
	void *sg_pointer;

	dev_dbg(&host->pdev->dev, "pio_read():\n");
	for (sg = data->sg; sg; sg = sg_next(sg)) {
		sg_pointer = page_address(sg_page(sg)) + sg->offset;


		memcpy(sg_pointer, from_ptr, sg->length);
		from_ptr += sg->length >> 1;

		data->bytes_xfered += sg->length;
	}

	dev_dbg(&host->pdev->dev, "pio_read(): "
			"complete (no more data).\n");
}

static void do_pio_write(struct glamo_mci_host *host, struct mmc_data *data)
{
	struct scatterlist *sg;
	u16 __iomem *to_ptr = host->data_base;
	void *sg_pointer;

	dev_dbg(&host->pdev->dev, "pio_write():\n");
	for (sg = data->sg; sg; sg = sg_next(sg)) {
		sg_pointer = page_address(sg_page(sg)) + sg->offset;

		data->bytes_xfered += sg->length;

		memcpy(to_ptr, sg_pointer, sg->length);
		to_ptr += sg->length >> 1;
	}

	dev_dbg(&host->pdev->dev, "pio_write(): complete\n");
}

static int glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq)
{
	int real_rate = 0;

	if (freq) {
		glamo_mci_clock_enable(host);
		real_rate = glamo_engine_reclock(host->core, GLAMO_ENGINE_MMC, freq);
	} else {
		glamo_mci_clock_disable(host);
	}

	return real_rate;
}

static void glamo_mci_request_done(struct glamo_mci_host *host, struct
mmc_request *mrq) {
	mod_timer(&host->disable_timer, jiffies + HZ / 16);
	mmc_request_done(host->mmc, mrq);
}


static void glamo_mci_irq_worker(struct work_struct *work)
{
	struct glamo_mci_host *host = container_of(work, struct glamo_mci_host,
												irq_work);
	struct mmc_command *cmd;
	uint16_t status;
	if (!host->mrq || !host->mrq->cmd)
		return;

	cmd = host->mrq->cmd;

#if 0
	if (cmd->data->flags & MMC_DATA_READ) {
		return;
	}
#endif

	status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
	dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status);

	/* we ignore a data timeout report if we are also told the data came */
	if (status & GLAMO_STAT1_MMC_RB_DRDY)
		status &= ~GLAMO_STAT1_MMC_DTOUT;

	if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT))
		cmd->error = -ETIMEDOUT;
	if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) {
		cmd->error = -EILSEQ;
	}
	if (cmd->error) {
		dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
		goto done;
	}

	/* issue STOP if we have been given one to use */
	if (host->mrq->stop) {
		glamo_mci_send_command(host, host->mrq->stop);
	}

	if (cmd->data->flags & MMC_DATA_READ)
		do_pio_read(host, cmd->data);

done:
	host->mrq = NULL;
	glamo_mci_request_done(host, cmd->mrq);
}

static void glamo_mci_read_worker(struct work_struct *work)
{
	struct glamo_mci_host *host = container_of(work, struct glamo_mci_host,
												read_work);
	struct mmc_command *cmd;
	uint16_t status;
	uint16_t blocks_ready;
	size_t data_read = 0;
	size_t data_ready;
	struct scatterlist *sg;
	u16 __iomem *from_ptr = host->data_base;
	void *sg_pointer;


	cmd = host->mrq->cmd;
	sg = cmd->data->sg;
	do {
		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);

		if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT))
			cmd->error = -ETIMEDOUT;
		if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR))
			cmd->error = -EILSEQ;
		if (cmd->error) {
			dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
			goto done;
		}

		blocks_ready = glamo_reg_read(host, GLAMO_REG_MMC_RB_BLKCNT);
		data_ready = blocks_ready * cmd->data->blksz;

		if (data_ready == data_read)
			yield();

		while(sg && data_read + sg->length <= data_ready) {
			sg_pointer = page_address(sg_page(sg)) + sg->offset;
			memcpy(sg_pointer, from_ptr, sg->length);
			from_ptr += sg->length >> 1;

			data_read += sg->length;
			sg = sg_next(sg);
		}

	} while(sg);
	cmd->data->bytes_xfered = data_read;

	do {
		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
	} while (!(status & GLAMO_STAT1_MMC_IDLE));

	if (host->mrq->stop)
		glamo_mci_send_command(host, host->mrq->stop);

	do {
		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
	} while (!(status & GLAMO_STAT1_MMC_IDLE));
done:
	host->mrq = NULL;
	glamo_mci_request_done(host, cmd->mrq);
}

static irqreturn_t glamo_mci_irq(int irq, void *devid)
{
	struct glamo_mci_host *host = (struct glamo_mci_host*)devid;
	schedule_work(&host->irq_work);

	return IRQ_HANDLED;
}

static void glamo_mci_send_command(struct glamo_mci_host *host,
				  struct mmc_command *cmd)
{
	u8 u8a[6];
	u16 fire = 0;
	unsigned int timeout = 1000000;
	u16 * reg_resp = (u16 *)(host->mmio_base + GLAMO_REG_MMC_CMD_RSP1);
	u16 status;
	int triggers_int = 1;

	/* if we can't do it, reject as busy */
	if (!glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1) &
		 GLAMO_STAT1_MMC_IDLE) {
		cmd->error = -EBUSY;
		return;
	}

	/* create an array in wire order for CRC computation */
	u8a[0] = 0x40 | (cmd->opcode & 0x3f);
	u8a[1] = (u8)(cmd->arg >> 24);
	u8a[2] = (u8)(cmd->arg >> 16);
	u8a[3] = (u8)(cmd->arg >> 8);
	u8a[4] = (u8)cmd->arg;
	u8a[5] = (crc7(0, u8a, 5) << 1) | 0x01; /* crc7 on first 5 bytes of packet */

	/* issue the wire-order array including CRC in register order */
	glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG1, ((u8a[4] << 8) | u8a[5]));
	glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG2, ((u8a[2] << 8) | u8a[3]));
	glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG3, ((u8a[0] << 8) | u8a[1]));

	/* command index toggle */
	fire |= (host->request_counter & 1) << 12;

	/* set type of command */
	switch (mmc_cmd_type(cmd)) {
	case MMC_CMD_BC:
		fire |= GLAMO_FIRE_MMC_CMDT_BNR;
		break;
	case MMC_CMD_BCR:
		fire |= GLAMO_FIRE_MMC_CMDT_BR;
		break;
	case MMC_CMD_AC:
		fire |= GLAMO_FIRE_MMC_CMDT_AND;
		break;
	case MMC_CMD_ADTC:
		fire |= GLAMO_FIRE_MMC_CMDT_AD;
		break;
	}
	/*
	 * if it expects a response, set the type expected
	 *
	 * R1, Length  : 48bit, Normal response
	 * R1b, Length : 48bit, same R1, but added card busy status
	 * R2, Length  : 136bit (really 128 bits with CRC snipped)
	 * R3, Length  : 48bit (OCR register value)
	 * R4, Length  : 48bit, SDIO_OP_CONDITION, Reverse SDIO Card
	 * R5, Length  : 48bit, IO_RW_DIRECTION, Reverse SDIO Card
	 * R6, Length  : 48bit (RCA register)
	 * R7, Length  : 48bit (interface condition, VHS(voltage supplied),
	 *                     check pattern, CRC7)
	 */
	switch (mmc_resp_type(cmd)) {
	case MMC_RSP_R1: /* same index as R6 and R7 */
		fire |= GLAMO_FIRE_MMC_RSPT_R1;
		break;
	case MMC_RSP_R1B:
		fire |= GLAMO_FIRE_MMC_RSPT_R1b;
		break;
	case MMC_RSP_R2:
		fire |= GLAMO_FIRE_MMC_RSPT_R2;
		break;
	case MMC_RSP_R3:
		fire |= GLAMO_FIRE_MMC_RSPT_R3;
		break;
	/* R4 and R5 supported by chip not defined in linux/mmc/core.h (sdio) */
	}
	/*
	 * From the command index, set up the command class in the host ctrllr
	 *
	 * missing guys present on chip but couldn't figure out how to use yet:
	 *     0x0 "stream read"
	 *     0x9 "cancel running command"
	 */
	switch (cmd->opcode) {
	case MMC_READ_SINGLE_BLOCK:
		fire |= GLAMO_FIRE_MMC_CC_SBR; /* single block read */
		break;
	case MMC_SWITCH: /* 64 byte payload */
	case SD_APP_SEND_SCR:
	case MMC_READ_MULTIPLE_BLOCK:
		/* we will get an interrupt off this */
		if (!cmd->mrq->stop)
			/* multiblock no stop */
			fire |= GLAMO_FIRE_MMC_CC_MBRNS;
		else
			 /* multiblock with stop */
			fire |= GLAMO_FIRE_MMC_CC_MBRS;
		break;
	case MMC_WRITE_BLOCK:
		fire |= GLAMO_FIRE_MMC_CC_SBW; /* single block write */
		break;
	case MMC_WRITE_MULTIPLE_BLOCK:
		if (cmd->mrq->stop)
			 /* multiblock with stop */
			fire |= GLAMO_FIRE_MMC_CC_MBWS;
		else
			 /* multiblock NO stop-- 'RESERVED'? */
			fire |= GLAMO_FIRE_MMC_CC_MBWNS;
		break;
	case MMC_STOP_TRANSMISSION:
		fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */
		triggers_int = 0;
		break;
	default:
		fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */
		triggers_int = 0;
		break;
	}

	if (cmd->data)
		host->mrq = cmd->mrq;

	/* always largest timeout */
	glamo_reg_write(host, GLAMO_REG_MMC_TIMEOUT, 0xfff);

	/* Generate interrupt on txfer */
	glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, 0xff36,
			0x0800 |
			GLAMO_BASIC_MMC_NO_CLK_RD_WAIT |
			GLAMO_BASIC_MMC_EN_COMPL_INT |
			GLAMO_BASIC_MMC_EN_DATA_PUPS |
			GLAMO_BASIC_MMC_EN_CMD_PUP);

	/* send the command out on the wire */
	/* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */
	glamo_reg_write(host, GLAMO_REG_MMC_CMD_FIRE, fire);

	/* we are deselecting card?  because it isn't going to ack then... */
	if ((cmd->opcode == 7) && (cmd->arg == 0))
		return;

	/*
	 * we must spin until response is ready or timed out
	 * -- we don't get interrupts unless there is a bulk rx
	 */
	do
		status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
	while (((((status >> 15) & 1) != (host->request_counter & 1)) ||
		(!(status & (GLAMO_STAT1_MMC_RB_RRDY |
				 GLAMO_STAT1_MMC_RTOUT |
				 GLAMO_STAT1_MMC_DTOUT |
				 GLAMO_STAT1_MMC_BWERR |
				 GLAMO_STAT1_MMC_BRERR)))) && (timeout--));

	if ((status & (GLAMO_STAT1_MMC_RTOUT |
				   GLAMO_STAT1_MMC_DTOUT)) ||
		(timeout == 0)) {
		cmd->error = -ETIMEDOUT;
	} else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) {
		cmd->error = -EILSEQ;
	}

	if (cmd->flags & MMC_RSP_PRESENT) {
		if (cmd->flags & MMC_RSP_136) {
			cmd->resp[3] = readw(&reg_resp[0]) |
						   (readw(&reg_resp[1]) << 16);
			cmd->resp[2] = readw(&reg_resp[2]) |
						   (readw(&reg_resp[3]) << 16);
			cmd->resp[1] = readw(&reg_resp[4]) |
						   (readw(&reg_resp[5]) << 16);
			cmd->resp[0] = readw(&reg_resp[6]) |
						   (readw(&reg_resp[7]) << 16);
		} else {
			cmd->resp[0] = (readw(&reg_resp[0]) >> 8) |
						   (readw(&reg_resp[1]) << 8) |
						   ((readw(&reg_resp[2])) << 24);
		}
	}

#if 0
	/* We'll only get an interrupt when all data has been transfered.
	   By starting to copy data when it's avaiable we can increase throughput by
	   up to 30%. */
	if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
		schedule_work(&host->read_work);
#endif

}

static int glamo_mci_prepare_pio(struct glamo_mci_host *host,
				 struct mmc_data *data)
{
	/* set up the block info */
	glamo_reg_write(host, GLAMO_REG_MMC_DATBLKLEN, data->blksz);
	glamo_reg_write(host, GLAMO_REG_MMC_DATBLKCNT, data->blocks);

	data->bytes_xfered = 0;

	/* if write, prep the write into the shared RAM before the command */
	if (data->flags & MMC_DATA_WRITE) {
		do_pio_write(host, data);
	}

	dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n",
				   data->blksz, data->blocks);
	return 0;
}

static int glamo_mci_irq_poll(struct glamo_mci_host *host,
				struct mmc_command *cmd)
{
	int timeout = 1000000;
	/*
	 * if the glamo INT# line isn't wired (*cough* it can happen)
	 * I'm afraid we have to spin on the IRQ status bit and "be
	 * our own INT# line"
	 */
	/*
	 * we have faith we will get an "interrupt"...
	 * but something insane like suspend problems can mean
	 * we spin here forever, so we timeout after a LONG time
	 */
	while ((!(readw(host->core->base +
		 GLAMO_REG_IRQ_STATUS) & GLAMO_IRQ_MMC)) &&
		   (timeout--));

	if (timeout < 0) {
		if (cmd->data->error)
			cmd->data->error = -ETIMEDOUT;
		dev_err(&host->pdev->dev, "Payload timeout\n");
		return -ETIMEDOUT;
	}
	/* ack this interrupt source */
	writew(GLAMO_IRQ_MMC, host->core->base +
		   GLAMO_REG_IRQ_CLEAR);

	/* yay we are an interrupt controller! -- call the ISR
	 * it will stop clock to card
	 */
	glamo_mci_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host);

	return 0;
}

static void glamo_mci_send_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
	struct glamo_mci_host *host = mmc_priv(mmc);
	struct mmc_command *cmd = mrq->cmd;

	glamo_mci_clock_enable(host);
	host->request_counter++;
	if (cmd->data) {
		if(glamo_mci_prepare_pio(host, cmd->data)) {
			cmd->error = -EIO;
			cmd->data->error = -EIO;
			goto done;
		}
	}

	dev_dbg(&host->pdev->dev,"cmd 0x%x, "
		 "arg 0x%x data=%p mrq->stop=%p flags 0x%x\n",
		 cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop,
		 cmd->flags);

	glamo_mci_send_command(host, cmd);

	/*
	 * if we don't have bulk data to take care of, we're done
	 */
	if (!cmd->data || cmd->error)
		goto done;


	if (!host->core->irq_works) {
		if (glamo_mci_irq_poll(host, mrq->cmd))
			goto done;
	}

	/*
	 * Otherwise can can use the interrupt as async completion --
	 * if there is read data coming, or we wait for write data to complete,
	 * exit without mmc_request_done() as the payload interrupt
	 * will service it
	 */
	dev_dbg(&host->pdev->dev, "Waiting for payload data\n");
	return;
done:
	glamo_mci_request_done(host, mrq);
}

static void glamo_mci_set_power_mode(struct glamo_mci_host *host,
				unsigned char power_mode) {
	int ret;

	if (power_mode == host->power_mode)
		return;

	switch(power_mode) {
	case MMC_POWER_UP:
		if (host->power_mode == MMC_POWER_OFF) {
			ret = regulator_enable(host->regulator);
			if (ret)
				dev_err(&host->pdev->dev, "Failed to enable regulator: %d\n", ret);
		}
		break;
	case MMC_POWER_ON:
		break;
	case MMC_POWER_OFF:
	default:
		glamo_engine_disable(host->core,
				     GLAMO_ENGINE_MMC);

		ret = regulator_disable(host->regulator);
		if (ret)
			dev_warn(&host->pdev->dev, "Failed to disable regulator: %d\n", ret);
		break;
	}
	host->power_mode = power_mode;
}

static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
	struct glamo_mci_host *host = mmc_priv(mmc);
	int bus_width = 0;
	int rate;
	int sd_drive;
	int ret;

	/* Set power */
	glamo_mci_set_power_mode(host, ios->power_mode);

	if (host->vdd != ios->vdd) {
		ret = mmc_regulator_set_ocr(host->regulator, ios->vdd);
		if (ret)
			dev_err(&host->pdev->dev, "Failed to set regulator voltage: %d\n", ret);
		else
			host->vdd = ios->vdd;
	}
	rate = glamo_mci_set_card_clock(host, ios->clock);

	if ((ios->power_mode == MMC_POWER_ON) ||
	    (ios->power_mode == MMC_POWER_UP)) {
		dev_info(&host->pdev->dev,
			"powered (vdd = %hu) clk: %dkHz div=%hu (req: %ukHz). "
			"Bus width=%d\n", ios->vdd,
			rate / 1000, 0,
			ios->clock / 1000, (int)ios->bus_width);
	} else {
		dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n");
	}

	/* set bus width */
	if (ios->bus_width == MMC_BUS_WIDTH_4)
		bus_width = GLAMO_BASIC_MMC_EN_4BIT_DATA;

	sd_drive = (rate * 4) / host->clk_rate;
	if (sd_drive > 3)
		sd_drive = 3;

	glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC,
					       GLAMO_BASIC_MMC_EN_4BIT_DATA | 0xb0,
						   bus_width | sd_drive << 6);
}


/*
 * no physical write protect supported by us
 */
static int glamo_mci_get_ro(struct mmc_host *mmc)
{
	return 0;
}

static struct mmc_host_ops glamo_mci_ops = {
	.request	= glamo_mci_send_request,
	.set_ios	= glamo_mci_set_ios,
	.get_ro		= glamo_mci_get_ro,
};

static int glamo_mci_probe(struct platform_device *pdev)
{
	struct mmc_host *mmc;
	struct glamo_mci_host *host;
	struct glamo_core *core = dev_get_drvdata(pdev->dev.parent);
	int ret;

	dev_info(&pdev->dev, "glamo_mci driver (C)2007 Openmoko, Inc\n");

	mmc = mmc_alloc_host(sizeof(struct glamo_mci_host), &pdev->dev);
	if (!mmc) {
		ret = -ENOMEM;
		goto probe_out;
	}

	host = mmc_priv(mmc);
	host->mmc = mmc;
	host->pdev = pdev;
	if (core->pdata)
		host->pdata = core->pdata->mmc_data;
	host->power_mode = MMC_POWER_OFF;
	host->clk_enabled = 0;
	host->core = core;

	INIT_WORK(&host->irq_work, glamo_mci_irq_worker);
	INIT_WORK(&host->read_work, glamo_mci_read_worker);

	host->regulator = regulator_get(pdev->dev.parent, "SD_3V3");
	if (!host->regulator) {
		dev_err(&pdev->dev, "Cannot proceed without regulator.\n");
		ret = -ENODEV;
		goto probe_free_host;
	}

	host->mmio_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!host->mmio_mem) {
		dev_err(&pdev->dev,
			"failed to get io memory region resouce.\n");
		ret = -ENOENT;
		goto probe_regulator_put;
	}

	host->mmio_mem = request_mem_region(host->mmio_mem->start,
	                                    resource_size(host->mmio_mem),
	                                    pdev->name);

	if (!host->mmio_mem) {
		dev_err(&pdev->dev, "failed to request io memory region.\n");
		ret = -ENOENT;
		goto probe_regulator_put;
	}

	host->mmio_base = ioremap(host->mmio_mem->start,
	                          resource_size(host->mmio_mem));
	if (!host->mmio_base) {
		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
		ret = -EINVAL;
		goto probe_free_mem_region_mmio;
	}


	/* Get ahold of our data buffer we use for data in and out on MMC */
	host->data_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	if (!host->data_mem) {
		dev_err(&pdev->dev,
			"failed to get io memory region resource.\n");
		ret = -ENOENT;
		goto probe_iounmap_mmio;
	}

	host->data_mem = request_mem_region(host->data_mem->start,
	                                    resource_size(host->data_mem),
										pdev->name);

	if (!host->data_mem) {
		dev_err(&pdev->dev, "failed to request io memory region.\n");
		ret = -ENOENT;
		goto probe_iounmap_mmio;
	}
	host->data_base = ioremap(host->data_mem->start,
	                          resource_size(host->data_mem));

	if (host->data_base == 0) {
		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
		ret = -EINVAL;
		goto probe_free_mem_region_data;
	}

	ret = request_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), glamo_mci_irq, IRQF_SHARED,
	               pdev->name, host);
	if (ret) {
		dev_err(&pdev->dev, "failed to register irq.\n");
		goto probe_iounmap_data;
	}


	host->vdd = 0;
	host->clk_rate = glamo_pll_rate(host->core, GLAMO_PLL1);

	/* explain our host controller capabilities */
	mmc->ops       = &glamo_mci_ops;
	mmc->ocr_avail = mmc_regulator_get_ocrmask(host->regulator);
	mmc->caps      = MMC_CAP_4_BIT_DATA |
	                 MMC_CAP_MMC_HIGHSPEED |
	                 MMC_CAP_SD_HIGHSPEED;
	mmc->f_min     = host->clk_rate / 256;
	mmc->f_max     = sd_max_clk;

	mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */
	mmc->max_blk_size  = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */
	mmc->max_req_size  = resource_size(host->data_mem);
	mmc->max_seg_size  = mmc->max_req_size;
	mmc->max_phys_segs = 128;
	mmc->max_hw_segs   = 128;

	if (mmc->ocr_avail < 0) {
		dev_warn(&pdev->dev, "Failed to get ocr list for regulator: %d.\n",
				mmc->ocr_avail);
		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
	}

	platform_set_drvdata(pdev, mmc);

	glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
	glamo_engine_reset(host->core, GLAMO_ENGINE_MMC);

	glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1,
			(u16)(host->data_mem->start));
	glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2,
			(u16)(host->data_mem->start >> 16));

	glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1,
			(u16)(host->data_mem->start));
	glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2,
			(u16)(host->data_mem->start >> 16));

	setup_timer(&host->disable_timer, glamo_mci_disable_timer,
				(unsigned long)host);

	if ((ret = mmc_add_host(mmc))) {
		dev_err(&pdev->dev, "failed to add mmc host.\n");
		goto probe_freeirq;
	}

	dev_info(&pdev->dev,"initialisation done.\n");
	return 0;

probe_freeirq:
	free_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host);
probe_iounmap_data:
	iounmap(host->data_base);
probe_free_mem_region_data:
	release_mem_region(host->data_mem->start, resource_size(host->data_mem));
probe_iounmap_mmio:
	iounmap(host->mmio_base);
probe_free_mem_region_mmio:
	release_mem_region(host->mmio_mem->start, resource_size(host->mmio_mem));
probe_regulator_put:
	regulator_put(host->regulator);
probe_free_host:
	mmc_free_host(mmc);
probe_out:
	return ret;
}

static int glamo_mci_remove(struct platform_device *pdev)
{
	struct mmc_host	*mmc = platform_get_drvdata(pdev);
	struct glamo_mci_host *host = mmc_priv(mmc);

	free_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host);

	mmc_remove_host(mmc);
	iounmap(host->mmio_base);
	iounmap(host->data_base);
	release_mem_region(host->mmio_mem->start, resource_size(host->mmio_mem));
	release_mem_region(host->data_mem->start, resource_size(host->data_mem));

	regulator_put(host->regulator);

	mmc_free_host(mmc);

	glamo_engine_disable(host->core, GLAMO_ENGINE_MMC);
	return 0;
}


#ifdef CONFIG_PM

static int glamo_mci_suspend(struct device *dev)
{
	struct mmc_host *mmc = dev_get_drvdata(dev);
	struct glamo_mci_host *host = mmc_priv(mmc);
	int ret;

	cancel_work_sync(&host->irq_work);

	ret = mmc_suspend_host(mmc, PMSG_SUSPEND);
	glamo_mci_clock_enable(host);

	return ret;
}

static int glamo_mci_resume(struct device *dev)
{
	struct mmc_host *mmc = dev_get_drvdata(dev);
	struct glamo_mci_host *host = mmc_priv(mmc);
	int ret;

	glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
	glamo_engine_reset(host->core, GLAMO_ENGINE_MMC);

	glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1,
			(u16)(host->data_mem->start));
	glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2,
			(u16)(host->data_mem->start >> 16));

	glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1,
			(u16)(host->data_mem->start));
	glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2,
			(u16)(host->data_mem->start >> 16));
	mdelay(5);

	ret = mmc_resume_host(host->mmc);
/*	glamo_mci_clock_disable(host);*/

	return 0;
}

static struct dev_pm_ops glamo_mci_pm_ops = {
	.suspend = glamo_mci_suspend,
	.resume  = glamo_mci_resume,
};
#define GLAMO_MCI_PM_OPS (&glamo_mci_pm_ops)

#else /* CONFIG_PM */
#define GLAMO_MCI_PM_OPS NULL
#endif /* CONFIG_PM */


static struct platform_driver glamo_mci_driver =
{
	.probe  = glamo_mci_probe,
	.remove = glamo_mci_remove,
	.driver = {
		.name  = "glamo-mci",
		.owner = THIS_MODULE,
		.pm    = GLAMO_MCI_PM_OPS,
	},
};

static int __init glamo_mci_init(void)
{
	platform_driver_register(&glamo_mci_driver);
	return 0;
}

static void __exit glamo_mci_exit(void)
{
	platform_driver_unregister(&glamo_mci_driver);
}

module_init(glamo_mci_init);
module_exit(glamo_mci_exit);

MODULE_DESCRIPTION("Glamo MMC/SD Card Interface driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Andy Green <andy@openmoko.com>");