1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
|
/*
* Ralink RT288x SoC specific setup
*
* Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Ralink's 2.6.21 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/mips_machine.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <asm/mach-ralink/common.h>
#include <asm/mach-ralink/rt288x.h>
#include <asm/mach-ralink/rt288x_regs.h>
#include "common.h"
static void rt288x_restart(char *command)
{
rt288x_sysc_wr(RT2880_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
while (1)
if (cpu_wait)
cpu_wait();
}
static void rt288x_halt(void)
{
while (1)
cpu_wait();
}
unsigned int __cpuinit get_c0_compare_irq(void)
{
return CP0_LEGACY_COMPARE_IRQ;
}
void __init ramips_soc_setup(void)
{
struct clk *clk;
rt288x_sysc_base = ioremap_nocache(RT2880_SYSC_BASE, RT2880_SYSC_SIZE);
rt288x_memc_base = ioremap_nocache(RT2880_MEMC_BASE, RT2880_MEMC_SIZE);
rt288x_clocks_init();
clk = clk_get(NULL, "cpu");
if (IS_ERR(clk))
panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type,
clk_get_rate(clk) / 1000000,
(clk_get_rate(clk) % 1000000) * 100 / 1000000);
_machine_restart = rt288x_restart;
_machine_halt = rt288x_halt;
pm_power_off = rt288x_halt;
clk = clk_get(NULL, "uart");
if (IS_ERR(clk))
panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
ramips_early_serial_setup(0, RT2880_UART0_BASE, clk_get_rate(clk),
RT2880_INTC_IRQ_UART0);
ramips_early_serial_setup(1, RT2880_UART1_BASE, clk_get_rate(clk),
RT2880_INTC_IRQ_UART1);
}
void __init plat_time_init(void)
{
struct clk *clk;
clk = clk_get(NULL, "cpu");
if (IS_ERR(clk))
panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
mips_hpt_frequency = clk_get_rate(clk) / 2;
}
|
