1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
|
This enables the mmc-over-spi driver for the Sim.One board, based on Mika's
patch, which used a GPIO for chip select in stead of the default SFRMOUT pin.
I've modified it to use the usual SFRMOUT; if you've modified your Sim.One
board to use a GPIO instead, uncomment and modify
// #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO15
in the source file.
-martinwguy, 14 May 2010
From: Mika Westerberg <mika.westerberg@iki.fi>
Date: Wed, 28 Apr 2010 08:42:46 +0300
Subject: [PATCH] ep93xx: simone: added board specific SPI support for MMC/SD cards
This includes setting up EGPIOs 0 and 9 for card detection and chip select
respectively.
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -18,12 +18,17 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/gpio-ep93xx.h>
+#include <mach/ep93xx_spi.h>
#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
@@ -39,6 +44,135 @@ static struct ep93xxfb_mach_info __initd
.flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
};
+/*
+ * GPIO lines used for MMC card detection.
+ */
+#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0
+
+/*
+ * If you have hacked your Sim.One to use a GPIO as SD card chip select
+ * (SD pin 1), uncomment the following line.
+ * The example, EGPIO15, is on TP17 near the CPU.
+ */
+// #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO15
+
+/*
+ * MMC SPI chip select GPIO handling. If you are using SFRMOUT (SFRM1) signal,
+ * you can leave these empty and pass NULL as .controller_data.
+ */
+
+#ifdef MMC_CHIP_SELECT_GPIO
+static int simone_mmc_spi_setup(struct spi_device *spi)
+{
+ unsigned int gpio = MMC_CHIP_SELECT_GPIO;
+ int err;
+
+ err = gpio_request(gpio, spi->modalias);
+ if (err)
+ return err;
+
+ err = gpio_direction_output(gpio, 1);
+ if (err) {
+ gpio_free(gpio);
+ return err;
+ }
+
+ return 0;
+}
+
+static void simone_mmc_spi_cleanup(struct spi_device *spi)
+{
+ unsigned int gpio = MMC_CHIP_SELECT_GPIO;
+
+ gpio_set_value(gpio, 1);
+ gpio_direction_input(gpio);
+ gpio_free(gpio);
+}
+
+static void simone_mmc_spi_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(MMC_CHIP_SELECT_GPIO, value);
+}
+
+static struct ep93xx_spi_chip_ops simone_mmc_spi_ops = {
+ .setup = simone_mmc_spi_setup,
+ .cleanup = simone_mmc_spi_cleanup,
+ .cs_control = simone_mmc_spi_cs_control,
+};
+#endif
+
+/*
+ * MMC card detection GPIO setup.
+ */
+static int simone_mmc_spi_init(struct device *dev,
+ irqreturn_t (*irq_handler)(int, void *), void *mmc)
+{
+ unsigned int gpio = MMC_CARD_DETECT_GPIO;
+ int irq, err;
+
+ err = gpio_request(gpio, dev_name(dev));
+ if (err)
+ return err;
+
+ err = gpio_direction_input(gpio);
+ if (err)
+ goto fail;
+
+ irq = gpio_to_irq(gpio);
+ if (irq < 0)
+ goto fail;
+
+ err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING,
+ "MMC card detect", mmc);
+ if (err)
+ goto fail;
+
+ printk(KERN_INFO "%s: using irq %d for MMC card detection\n",
+ dev_name(dev), irq);
+
+ return 0;
+fail:
+ gpio_free(gpio);
+ return err;
+}
+
+static void simone_mmc_spi_exit(struct device *dev, void *mmc)
+{
+ unsigned int gpio = MMC_CARD_DETECT_GPIO;
+
+ free_irq(gpio_to_irq(gpio), mmc);
+ gpio_free(gpio);
+}
+
+static struct mmc_spi_platform_data simone_mmc_spi_data = {
+ .init = simone_mmc_spi_init,
+ .exit = simone_mmc_spi_exit,
+ .detect_delay = 500,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct spi_board_info simone_spi_devices[] __initdata = {
+ {
+ .modalias = "mmc_spi",
+#ifdef MMC_CHIP_SELECT_GPIO
+ .controller_data = &simone_mmc_spi_ops,
+#endif
+ .platform_data = &simone_mmc_spi_data,
+ /*
+ * We use 10 MHz even though the maximum is 3.7 MHz. The driver
+ * will limit it automatically to max. frequency.
+ */
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct ep93xx_spi_info simone_spi_info __initdata = {
+ .num_chipselect = ARRAY_SIZE(simone_spi_devices),
+};
+
static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
.sda_is_open_drain = 0,
@@ -73,6 +207,8 @@ static void __init simone_init_machine(v
ep93xx_register_fb(&simone_fb_info);
ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
ARRAY_SIZE(simone_i2c_board_info));
+ ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
+ ARRAY_SIZE(simone_spi_devices));
simone_register_audio();
}
|
