1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
|
/*
* Buffalo WZR-HP-G300NH2 board support
*
* Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-ath79/ath79.h>
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "machtypes.h"
#define WZRHPG300NH2_MAC_OFFSET 0x20c
#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */
#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL)
static struct mtd_partition wzrhpg300nh2_flash_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x0040000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "u-boot-env",
.offset = 0x0040000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "art",
.offset = 0x0050000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = 0x0060000,
.size = 0x0100000,
}, {
.name = "rootfs",
.offset = 0x0160000,
.size = 0x1e90000,
}, {
.name = "user_property",
.offset = 0x1ff0000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "firmware",
.offset = 0x0060000,
.size = 0x1f90000,
}
};
static struct flash_platform_data wzrhpg300nh2_flash_data = {
.parts = wzrhpg300nh2_flash_partitions,
.nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions),
};
static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = {
{
.name = "buffalo:red:diag",
.gpio = 16,
.active_low = 1,
},
};
static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = {
{
.name = "buffalo:blue:usb",
.gpio = 4,
.active_low = 1,
},
{
.name = "buffalo:orange:security",
.gpio = 6,
.active_low = 1,
},
{
.name = "buffalo:green:router",
.gpio = 7,
.active_low = 1,
},
{
.name = "buffalo:blue:movie_engine_on",
.gpio = 8,
.active_low = 1,
},
{
.name = "buffalo:blue:movie_engine_off",
.gpio = 9,
.active_low = 1,
},
};
/* The AOSS button is wmac gpio 12 */
static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
.gpio = 1,
.active_low = 1,
}, {
.desc = "usb",
.type = EV_KEY,
.code = BTN_2,
.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
.gpio = 7,
.active_low = 1,
}, {
.desc = "qos",
.type = EV_KEY,
.code = BTN_3,
.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
.gpio = 11,
.active_low = 0,
}, {
.desc = "router_on",
.type = EV_KEY,
.code = BTN_5,
.debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
.gpio = 8,
.active_low = 0,
},
};
static void __init wzrhpg300nh2_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000);
u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET;
/* There is an eth1 but it is not connected to the switch */
ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data);
ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
ath79_register_mdio(0, ~(BIT(0)));
ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_register_eth(0);
/* gpio13 is usb power. Turn it on. */
ath79_set_usb_power_gpio(13, GPIOF_OUT_INIT_HIGH, "USB power");
ath79_register_usb();
ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio),
wzrhpg300nh2_leds_gpio);
ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wzrhpg300nh2_gpio_keys),
wzrhpg300nh2_gpio_keys);
ap9x_pci_setup_wmac_led_pin(0, 5);
ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio,
ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio));
ap91_pci_init(eeprom, mac0);
}
MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2",
"Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup);
|
