/* ========================================================================== * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $ * $Revision: 1.2 $ * $Date: 2008-11-21 05:39:15 $ * $Change: 1099526 $ * * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless * otherwise expressly agreed to in writing between Synopsys and you. * * The Software IS NOT an item of Licensed Software or Licensed Product under * any End User Software License Agreement or Agreement for Licensed Product * with Synopsys or any supplement thereto. You are permitted to use and * redistribute this Software in source and binary forms, with or without * modification, provided that redistributions of source code must retain this * notice. You may not view, use, disclose, copy or distribute this file or * any information contained herein except pursuant to this license grant from * Synopsys. If you do not agree with this notice, including the disclaimer * below, then you are not authorized to use the Software. * * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * DAMAGE. * ========================================================================== */ #ifndef __DWC_OTG_REGS_H__ #define __DWC_OTG_REGS_H__ /** * @file * * This file contains the data structures for accessing the DWC_otg core registers. * * The application interfaces with the HS OTG core by reading from and * writing to the Control and Status Register (CSR) space through the * AHB Slave interface. These registers are 32 bits wide, and the * addresses are 32-bit-block aligned. * CSRs are classified as follows: * - Core Global Registers * - Device Mode Registers * - Device Global Registers * - Device Endpoint Specific Registers * - Host Mode Registers * - Host Global Registers * - Host Port CSRs * - Host Channel Specific Registers * * Only the Core Global registers can be accessed in both Device and * Host modes. When the HS OTG core is operating in one mode, either * Device or Host, the application must not access registers from the * other mode. When the core switches from one mode to another, the * registers in the new mode of operation must be reprogrammed as they * would be after a power-on reset. */ /** Maximum number of Periodic FIFOs */ #define MAX_PERIO_FIFOS 15 /** Maximum number of Transmit FIFOs */ #define MAX_TX_FIFOS 15 /** Maximum number of Endpoints/HostChannels */ #define MAX_EPS_CHANNELS 16 /****************************************************************************/ /** DWC_otg Core registers . * The dwc_otg_core_global_regs structure defines the size * and relative field offsets for the Core Global registers. */ typedef struct dwc_otg_core_global_regs { /** OTG Control and Status Register. Offset: 000h */ volatile uint32_t gotgctl; /** OTG Interrupt Register. Offset: 004h */ volatile uint32_t gotgint; /**Core AHB Configuration Register. Offset: 008h */ volatile uint32_t gahbcfg; #define DWC_GLBINTRMASK 0x0001 #define DWC_DMAENABLE 0x0020 #define DWC_NPTXEMPTYLVL_EMPTY 0x0080 #define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000 #define DWC_PTXEMPTYLVL_EMPTY 0x0100 #define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000 /**Core USB Configuration Register. Offset: 00Ch */ volatile uint32_t gusbcfg; /**Core Reset Register. Offset: 010h */ volatile uint32_t grstctl; /**Core Interrupt Register. Offset: 014h */ volatile uint32_t gintsts; /**Core Interrupt Mask Register. Offset: 018h */ volatile uint32_t gintmsk; /**Receive Status Queue Read Register (Read Only). Offset: 01Ch */ volatile uint32_t grxstsr; /**Receive Status Queue Read & POP Register (Read Only). Offset: 020h*/ volatile uint32_t grxstsp; /**Receive FIFO Size Register. Offset: 024h */ volatile uint32_t grxfsiz; /**Non Periodic Transmit FIFO Size Register. Offset: 028h */ volatile uint32_t gnptxfsiz; /**Non Periodic Transmit FIFO/Queue Status Register (Read * Only). Offset: 02Ch */ volatile uint32_t gnptxsts; /**I2C Access Register. Offset: 030h */ volatile uint32_t gi2cctl; /**PHY Vendor Control Register. Offset: 034h */ volatile uint32_t gpvndctl; /**General Purpose Input/Output Register. Offset: 038h */ volatile uint32_t ggpio; /**User ID Register. Offset: 03Ch */ volatile uint32_t guid; /**Synopsys ID Register (Read Only). Offset: 040h */ volatile uint32_t gsnpsid; /**User HW Config1 Register (Read Only). Offset: 044h */ volatile uint32_t ghwcfg1; /**User HW Config2 Register (Read Only). Offset: 048h */ volatile uint32_t ghwcfg2; #define DWC_SLAVE_ONLY_ARCH 0 #define DWC_EXT_DMA_ARCH 1 #define DWC_INT_DMA_ARCH 2 #define DWC_MODE_HNP_SRP_CAPABLE 0 #define DWC_MODE_SRP_ONLY_CAPABLE 1 #define DWC_MODE_NO_HNP_SRP_CAPABLE 2 #define DWC_MODE_SRP_CAPABLE_DEVICE 3 #define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4 #define DWC_MODE_SRP_CAPABLE_HOST 5 #define DWC_MODE_NO_SRP_CAPABLE_HOST 6 /**User HW Config3 Register (Read Only). Offset: 04Ch */ volatile uint32_t ghwcfg3; /**User HW Config4 Register (Read Only). Offset: 050h*/ volatile uint32_t ghwcfg4; /** Reserved Offset: 054h-0FFh */ volatile uint32_t reserved[43]; /** Host Periodic Transmit FIFO Size Register. Offset: 100h */ volatile uint32_t hptxfsiz; /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled, otherwise Device Transmit FIFO#n Register. * Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15). */ volatile uint32_t dptxfsiz_dieptxf[15]; } dwc_otg_core_global_regs_t; /** * This union represents the bit fields of the Core OTG Control * and Status Register (GOTGCTL). Set the bits using the bit * fields then write the d32 value to the register. */ typedef union gotgctl_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned sesreqscs : 1; unsigned sesreq : 1; unsigned reserved2_7 : 6; unsigned hstnegscs : 1; unsigned hnpreq : 1; unsigned hstsethnpen : 1; unsigned devhnpen : 1; unsigned reserved12_15 : 4; unsigned conidsts : 1; unsigned reserved17 : 1; unsigned asesvld : 1; unsigned bsesvld : 1; unsigned currmod : 1; unsigned reserved21_31 : 11; } b; } gotgctl_data_t; /** * This union represents the bit fields of the Core OTG Interrupt Register * (GOTGINT). Set/clear the bits using the bit fields then write the d32 * value to the register. */ typedef union gotgint_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Current Mode */ unsigned reserved0_1 : 2; /** Session End Detected */ unsigned sesenddet : 1; unsigned reserved3_7 : 5; /** Session Request Success Status Change */ unsigned sesreqsucstschng : 1; /** Host Negotiation Success Status Change */ unsigned hstnegsucstschng : 1; unsigned reserver10_16 : 7; /** Host Negotiation Detected */ unsigned hstnegdet : 1; /** A-Device Timeout Change */ unsigned adevtoutchng : 1; /** Debounce Done */ unsigned debdone : 1; unsigned reserved31_20 : 12; } b; } gotgint_data_t; /** * This union represents the bit fields of the Core AHB Configuration * Register (GAHBCFG). Set/clear the bits using the bit fields then * write the d32 value to the register. */ typedef union gahbcfg_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned glblintrmsk : 1; #define DWC_GAHBCFG_GLBINT_ENABLE 1 unsigned hburstlen : 4; #define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0 #define DWC_GAHBCFG_INT_DMA_BURST_INCR 1 #define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3 #define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5 #define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7 unsigned dmaenable : 1; #define DWC_GAHBCFG_DMAENABLE 1 unsigned reserved : 1; unsigned nptxfemplvl_txfemplvl : 1; unsigned ptxfemplvl : 1; #define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1 #define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 unsigned reserved9_31 : 23; } b; } gahbcfg_data_t; /** * This union represents the bit fields of the Core USB Configuration * Register (GUSBCFG). Set the bits using the bit fields then write * the d32 value to the register. */ typedef union gusbcfg_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned toutcal : 3; unsigned phyif : 1; unsigned ulpi_utmi_sel : 1; unsigned fsintf : 1; unsigned physel : 1; unsigned ddrsel : 1; unsigned srpcap : 1; unsigned hnpcap : 1; unsigned usbtrdtim : 4; unsigned nptxfrwnden : 1; unsigned phylpwrclksel : 1; unsigned otgutmifssel : 1; unsigned ulpi_fsls : 1; unsigned ulpi_auto_res : 1; unsigned ulpi_clk_sus_m : 1; unsigned ulpi_ext_vbus_drv : 1; unsigned ulpi_int_vbus_indicator : 1; unsigned term_sel_dl_pulse : 1; unsigned reserved23_27 : 5; unsigned tx_end_delay : 1; unsigned reserved29_31 : 3; } b; } gusbcfg_data_t; /** * This union represents the bit fields of the Core Reset Register * (GRSTCTL). Set/clear the bits using the bit fields then write the * d32 value to the register. */ typedef union grstctl_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Core Soft Reset (CSftRst) (Device and Host) * * The application can flush the control logic in the * entire core using this bit. This bit resets the * pipelines in the AHB Clock domain as well as the * PHY Clock domain. * * The state machines are reset to an IDLE state, the * control bits in the CSRs are cleared, all the * transmit FIFOs and the receive FIFO are flushed. * * The status mask bits that control the generation of * the interrupt, are cleared, to clear the * interrupt. The interrupt status bits are not * cleared, so the application can get the status of * any events that occurred in the core after it has * set this bit. * * Any transactions on the AHB are terminated as soon * as possible following the protocol. Any * transactions on the USB are terminated immediately. * * The configuration settings in the CSRs are * unchanged, so the software doesn't have to * reprogram these registers (Device * Configuration/Host Configuration/Core System * Configuration/Core PHY Configuration). * * The application can write to this bit, any time it * wants to reset the core. This is a self clearing * bit and the core clears this bit after all the * necessary logic is reset in the core, which may * take several clocks, depending on the current state * of the core. */ unsigned csftrst : 1; /** Hclk Soft Reset * * The application uses this bit to reset the control logic in * the AHB clock domain. Only AHB clock domain pipelines are * reset. */ unsigned hsftrst : 1; /** Host Frame Counter Reset (Host Only)
* * The application can reset the (micro)frame number * counter inside the core, using this bit. When the * (micro)frame counter is reset, the subsequent SOF * sent out by the core, will have a (micro)frame * number of 0. */ unsigned hstfrm : 1; /** In Token Sequence Learning Queue Flush * (INTknQFlsh) (Device Only) */ unsigned intknqflsh : 1; /** RxFIFO Flush (RxFFlsh) (Device and Host) * * The application can flush the entire Receive FIFO * using this bit.

The application must first * ensure that the core is not in the middle of a * transaction.

The application should write into * this bit, only after making sure that neither the * DMA engine is reading from the RxFIFO nor the MAC * is writing the data in to the FIFO.

The * application should wait until the bit is cleared * before performing any other operations. This bit * will takes 8 clocks (slowest of PHY or AHB clock) * to clear. */ unsigned rxfflsh : 1; /** TxFIFO Flush (TxFFlsh) (Device and Host). * * This bit is used to selectively flush a single or * all transmit FIFOs. The application must first * ensure that the core is not in the middle of a * transaction.

The application should write into * this bit, only after making sure that neither the * DMA engine is writing into the TxFIFO nor the MAC * is reading the data out of the FIFO.

The * application should wait until the core clears this * bit, before performing any operations. This bit * will takes 8 clocks (slowest of PHY or AHB clock) * to clear. */ unsigned txfflsh : 1; /** TxFIFO Number (TxFNum) (Device and Host). * * This is the FIFO number which needs to be flushed, * using the TxFIFO Flush bit. This field should not * be changed until the TxFIFO Flush bit is cleared by * the core. * - 0x0 : Non Periodic TxFIFO Flush * - 0x1 : Periodic TxFIFO #1 Flush in device mode * or Periodic TxFIFO in host mode * - 0x2 : Periodic TxFIFO #2 Flush in device mode. * - ... * - 0xF : Periodic TxFIFO #15 Flush in device mode * - 0x10: Flush all the Transmit NonPeriodic and * Transmit Periodic FIFOs in the core */ unsigned txfnum : 5; /** Reserved */ unsigned reserved11_29 : 19; /** DMA Request Signal. Indicated DMA request is in * probress. Used for debug purpose. */ unsigned dmareq : 1; /** AHB Master Idle. Indicates the AHB Master State * Machine is in IDLE condition. */ unsigned ahbidle : 1; } b; } grstctl_t; /** * This union represents the bit fields of the Core Interrupt Mask * Register (GINTMSK). Set/clear the bits using the bit fields then * write the d32 value to the register. */ typedef union gintmsk_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned reserved0 : 1; unsigned modemismatch : 1; unsigned otgintr : 1; unsigned sofintr : 1; unsigned rxstsqlvl : 1; unsigned nptxfempty : 1; unsigned ginnakeff : 1; unsigned goutnakeff : 1; unsigned reserved8 : 1; unsigned i2cintr : 1; unsigned erlysuspend : 1; unsigned usbsuspend : 1; unsigned usbreset : 1; unsigned enumdone : 1; unsigned isooutdrop : 1; unsigned eopframe : 1; unsigned reserved16 : 1; unsigned epmismatch : 1; unsigned inepintr : 1; unsigned outepintr : 1; unsigned incomplisoin : 1; unsigned incomplisoout : 1; unsigned reserved22_23 : 2; unsigned portintr : 1; unsigned hcintr : 1; unsigned ptxfempty : 1; unsigned reserved27 : 1; unsigned conidstschng : 1; unsigned disconnect : 1; unsigned sessreqintr : 1; unsigned wkupintr : 1; } b; } gintmsk_data_t; /** * This union represents the bit fields of the Core Interrupt Register * (GINTSTS). Set/clear the bits using the bit fields then write the * d32 value to the register. */ typedef union gintsts_data { /** raw register data */ uint32_t d32; #define DWC_SOF_INTR_MASK 0x0008 /** register bits */ struct { #define DWC_HOST_MODE 1 unsigned curmode : 1; unsigned modemismatch : 1; unsigned otgintr : 1; unsigned sofintr : 1; unsigned rxstsqlvl : 1; unsigned nptxfempty : 1; unsigned ginnakeff : 1; unsigned goutnakeff : 1; unsigned reserved8 : 1; unsigned i2cintr : 1; unsigned erlysuspend : 1; unsigned usbsuspend : 1; unsigned usbreset : 1; unsigned enumdone : 1; unsigned isooutdrop : 1; unsigned eopframe : 1; unsigned intokenrx : 1; unsigned epmismatch : 1; unsigned inepint: 1; unsigned outepintr : 1; unsigned incomplisoin : 1; unsigned incomplisoout : 1; unsigned reserved22_23 : 2; unsigned portintr : 1; unsigned hcintr : 1; unsigned ptxfempty : 1; unsigned reserved27 : 1; unsigned conidstschng : 1; unsigned disconnect : 1; unsigned sessreqintr : 1; unsigned wkupintr : 1; } b; } gintsts_data_t; /** * This union represents the bit fields in the Device Receive Status Read and * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the d32 * element then read out the bits using the bit elements. */ typedef union device_grxsts_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned epnum : 4; unsigned bcnt : 11; unsigned dpid : 2; #define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet #define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete #define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK #define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete #define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet unsigned pktsts : 4; unsigned fn : 4; unsigned reserved : 7; } b; } device_grxsts_data_t; /** * This union represents the bit fields in the Host Receive Status Read and * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the d32 * element then read out the bits using the bit elements. */ typedef union host_grxsts_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned chnum : 4; unsigned bcnt : 11; unsigned dpid : 2; unsigned pktsts : 4; #define DWC_GRXSTS_PKTSTS_IN 0x2 #define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3 #define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5 #define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7 unsigned reserved : 11; } b; } host_grxsts_data_t; /** * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ, * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the d32 element then * read out the bits using the bit elements. */ typedef union fifosize_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned startaddr : 16; unsigned depth : 16; } b; } fifosize_data_t; /** * This union represents the bit fields in the Non-Periodic Transmit * FIFO/Queue Status Register (GNPTXSTS). Read the register into the * d32 element then read out the bits using the bit * elements. */ typedef union gnptxsts_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned nptxfspcavail : 16; unsigned nptxqspcavail : 8; /** Top of the Non-Periodic Transmit Request Queue * - bit 24 - Terminate (Last entry for the selected * channel/EP) * - bits 26:25 - Token Type * - 2'b00 - IN/OUT * - 2'b01 - Zero Length OUT * - 2'b10 - PING/Complete Split * - 2'b11 - Channel Halt * - bits 30:27 - Channel/EP Number */ unsigned nptxqtop_terminate : 1; unsigned nptxqtop_token : 2; unsigned nptxqtop_chnep : 4; unsigned reserved : 1; } b; } gnptxsts_data_t; /** * This union represents the bit fields in the Transmit * FIFO Status Register (DTXFSTS). Read the register into the * d32 element then read out the bits using the bit * elements. */ typedef union dtxfsts_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned txfspcavail : 16; unsigned reserved : 16; } b; } dtxfsts_data_t; /** * This union represents the bit fields in the I2C Control Register * (I2CCTL). Read the register into the d32 element then read out the * bits using the bit elements. */ typedef union gi2cctl_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned rwdata : 8; unsigned regaddr : 8; unsigned addr : 7; unsigned i2cen : 1; unsigned ack : 1; unsigned i2csuspctl : 1; unsigned i2cdevaddr : 2; unsigned reserved : 2; unsigned rw : 1; unsigned bsydne : 1; } b; } gi2cctl_data_t; /** * This union represents the bit fields in the User HW Config1 * Register. Read the register into the d32 element then read * out the bits using the bit elements. */ typedef union hwcfg1_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned ep_dir0 : 2; unsigned ep_dir1 : 2; unsigned ep_dir2 : 2; unsigned ep_dir3 : 2; unsigned ep_dir4 : 2; unsigned ep_dir5 : 2; unsigned ep_dir6 : 2; unsigned ep_dir7 : 2; unsigned ep_dir8 : 2; unsigned ep_dir9 : 2; unsigned ep_dir10 : 2; unsigned ep_dir11 : 2; unsigned ep_dir12 : 2; unsigned ep_dir13 : 2; unsigned ep_dir14 : 2; unsigned ep_dir15 : 2; } b; } hwcfg1_data_t; /** * This union represents the bit fields in the User HW Config2 * Register. Read the register into the d32 element then read * out the bits using the bit elements. */ typedef union hwcfg2_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /* GHWCFG2 */ unsigned op_mode : 3; #define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0 #define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1 #define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2 #define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 #define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 #define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 #define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 unsigned architecture : 2; unsigned point2point : 1; unsigned hs_phy_type : 2; #define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 #define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1 #define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2 #define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 unsigned fs_phy_type : 2; unsigned num_dev_ep : 4; unsigned num_host_chan : 4; unsigned perio_ep_supported : 1; unsigned dynamic_fifo : 1; unsigned multi_proc_int : 1; unsigned reserved21 : 1; unsigned nonperio_tx_q_depth : 2; unsigned host_perio_tx_q_depth : 2; unsigned dev_token_q_depth : 5; unsigned reserved31 : 1; } b; } hwcfg2_data_t; /** * This union represents the bit fields in the User HW Config3 * Register. Read the register into the d32 element then read * out the bits using the bit elements. */ typedef union hwcfg3_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /* GHWCFG3 */ unsigned xfer_size_cntr_width : 4; unsigned packet_size_cntr_width : 3; unsigned otg_func : 1; unsigned i2c : 1; unsigned vendor_ctrl_if : 1; unsigned optional_features : 1; unsigned synch_reset_type : 1; unsigned ahb_phy_clock_synch : 1; unsigned reserved15_13 : 3; unsigned dfifo_depth : 16; } b; } hwcfg3_data_t; /** * This union represents the bit fields in the User HW Config4 * Register. Read the register into the d32 element then read * out the bits using the bit elements. */ typedef union hwcfg4_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned num_dev_perio_in_ep : 4; unsigned power_optimiz : 1; unsigned min_ahb_freq : 9; unsigned utmi_phy_data_width : 2; unsigned num_dev_mode_ctrl_ep : 4; unsigned iddig_filt_en : 1; unsigned vbus_valid_filt_en : 1; unsigned a_valid_filt_en : 1; unsigned b_valid_filt_en : 1; unsigned session_end_filt_en : 1; unsigned ded_fifo_en : 1; unsigned num_in_eps : 4; unsigned desc_dma : 1; unsigned desc_dma_dyn : 1; } b; } hwcfg4_data_t; //////////////////////////////////////////// // Device Registers /** * Device Global Registers. Offsets 800h-BFFh * * The following structures define the size and relative field offsets * for the Device Mode Registers. * * These registers are visible only in Device mode and must not be * accessed in Host mode, as the results are unknown. */ typedef struct dwc_otg_dev_global_regs { /** Device Configuration Register. Offset 800h */ volatile uint32_t dcfg; /** Device Control Register. Offset: 804h */ volatile uint32_t dctl; /** Device Status Register (Read Only). Offset: 808h */ volatile uint32_t dsts; /** Reserved. Offset: 80Ch */ uint32_t unused; /** Device IN Endpoint Common Interrupt Mask * Register. Offset: 810h */ volatile uint32_t diepmsk; /** Device OUT Endpoint Common Interrupt Mask * Register. Offset: 814h */ volatile uint32_t doepmsk; /** Device All Endpoints Interrupt Register. Offset: 818h */ volatile uint32_t daint; /** Device All Endpoints Interrupt Mask Register. Offset: * 81Ch */ volatile uint32_t daintmsk; /** Device IN Token Queue Read Register-1 (Read Only). * Offset: 820h */ volatile uint32_t dtknqr1; /** Device IN Token Queue Read Register-2 (Read Only). * Offset: 824h */ volatile uint32_t dtknqr2; /** Device VBUS discharge Register. Offset: 828h */ volatile uint32_t dvbusdis; /** Device VBUS Pulse Register. Offset: 82Ch */ volatile uint32_t dvbuspulse; /** Device IN Token Queue Read Register-3 (Read Only). / * Device Thresholding control register (Read/Write) * Offset: 830h */ volatile uint32_t dtknqr3_dthrctl; /** Device IN Token Queue Read Register-4 (Read Only). / * Device IN EPs empty Inr. Mask Register (Read/Write) * Offset: 834h */ volatile uint32_t dtknqr4_fifoemptymsk; /** Device Each Endpoint Interrupt Register (Read Only). / * Offset: 838h */ volatile uint32_t deachint; /** Device Each Endpoint Interrupt mask Register (Read/Write). / * Offset: 83Ch */ volatile uint32_t deachintmsk; /** Device Each In Endpoint Interrupt mask Register (Read/Write). / * Offset: 840h */ volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS]; /** Device Each Out Endpoint Interrupt mask Register (Read/Write). / * Offset: 880h */ volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS]; } dwc_otg_device_global_regs_t; /** * This union represents the bit fields in the Device Configuration * Register. Read the register into the d32 member then * set/clear the bits using the bit elements. Write the * d32 member to the dcfg register. */ typedef union dcfg_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Device Speed */ unsigned devspd : 2; /** Non Zero Length Status OUT Handshake */ unsigned nzstsouthshk : 1; #define DWC_DCFG_SEND_STALL 1 unsigned reserved3 : 1; /** Device Addresses */ unsigned devaddr : 7; /** Periodic Frame Interval */ unsigned perfrint : 2; #define DWC_DCFG_FRAME_INTERVAL_80 0 #define DWC_DCFG_FRAME_INTERVAL_85 1 #define DWC_DCFG_FRAME_INTERVAL_90 2 #define DWC_DCFG_FRAME_INTERVAL_95 3 unsigned reserved13_17 : 5; /** In Endpoint Mis-match count */ unsigned epmscnt : 5; /** Enable Descriptor DMA in Device mode */ unsigned descdma : 1; } b; } dcfg_data_t; /** * This union represents the bit fields in the Device Control * Register. Read the register into the d32 member then * set/clear the bits using the bit elements. */ typedef union dctl_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Remote Wakeup */ unsigned rmtwkupsig : 1; /** Soft Disconnect */ unsigned sftdiscon : 1; /** Global Non-Periodic IN NAK Status */ unsigned gnpinnaksts : 1; /** Global OUT NAK Status */ unsigned goutnaksts : 1; /** Test Control */ unsigned tstctl : 3; /** Set Global Non-Periodic IN NAK */ unsigned sgnpinnak : 1; /** Clear Global Non-Periodic IN NAK */ unsigned cgnpinnak : 1; /** Set Global OUT NAK */ unsigned sgoutnak : 1; /** Clear Global OUT NAK */ unsigned cgoutnak : 1; /** Power-On Programming Done */ unsigned pwronprgdone : 1; /** Global Continue on BNA */ unsigned gcontbna : 1; /** Global Multi Count */ unsigned gmc : 2; /** Ignore Frame Number for ISOC EPs */ unsigned ifrmnum : 1; /** NAK on Babble */ unsigned nakonbble : 1; unsigned reserved16_31 : 16; } b; } dctl_data_t; /** * This union represents the bit fields in the Device Status * Register. Read the register into the d32 member then * set/clear the bits using the bit elements. */ typedef union dsts_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Suspend Status */ unsigned suspsts : 1; /** Enumerated Speed */ unsigned enumspd : 2; #define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0 #define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1 #define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2 #define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3 /** Erratic Error */ unsigned errticerr : 1; unsigned reserved4_7: 4; /** Frame or Microframe Number of the received SOF */ unsigned soffn : 14; unsigned reserved22_31 : 10; } b; } dsts_data_t; /** * This union represents the bit fields in the Device IN EP Interrupt * Register and the Device IN EP Common Mask Register. * * - Read the register into the d32 member then set/clear the * bits using the bit elements. */ typedef union diepint_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Transfer complete mask */ unsigned xfercompl : 1; /** Endpoint disable mask */ unsigned epdisabled : 1; /** AHB Error mask */ unsigned ahberr : 1; /** TimeOUT Handshake mask (non-ISOC EPs) */ unsigned timeout : 1; /** IN Token received with TxF Empty mask */ unsigned intktxfemp : 1; /** IN Token Received with EP mismatch mask */ unsigned intknepmis : 1; /** IN Endpoint HAK Effective mask */ unsigned inepnakeff : 1; /** IN Endpoint HAK Effective mask */ unsigned emptyintr : 1; unsigned txfifoundrn : 1; /** BNA Interrupt mask */ unsigned bna : 1; unsigned reserved10_12 : 3; /** BNA Interrupt mask */ unsigned nak : 1; unsigned reserved14_31 : 18; } b; } diepint_data_t; /** * This union represents the bit fields in the Device IN EP * Common/Dedicated Interrupt Mask Register. */ typedef union diepint_data diepmsk_data_t; /** * This union represents the bit fields in the Device OUT EP Interrupt * Registerand Device OUT EP Common Interrupt Mask Register. * * - Read the register into the d32 member then set/clear the * bits using the bit elements. */ typedef union doepint_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Transfer complete */ unsigned xfercompl : 1; /** Endpoint disable */ unsigned epdisabled : 1; /** AHB Error */ unsigned ahberr : 1; /** Setup Phase Done (contorl EPs) */ unsigned setup : 1; /** OUT Token Received when Endpoint Disabled */ unsigned outtknepdis : 1; unsigned stsphsercvd : 1; /** Back-to-Back SETUP Packets Received */ unsigned back2backsetup : 1; unsigned reserved7 : 1; /** OUT packet Error */ unsigned outpkterr : 1; /** BNA Interrupt */ unsigned bna : 1; unsigned reserved10 : 1; /** Packet Drop Status */ unsigned pktdrpsts : 1; /** Babble Interrupt */ unsigned babble : 1; /** NAK Interrupt */ unsigned nak : 1; /** NYET Interrupt */ unsigned nyet : 1; unsigned reserved15_31 : 17; } b; } doepint_data_t; /** * This union represents the bit fields in the Device OUT EP * Common/Dedicated Interrupt Mask Register. */ typedef union doepint_data doepmsk_data_t; /** * This union represents the bit fields in the Device All EP Interrupt * and Mask Registers. * - Read the register into the d32 member then set/clear the * bits using the bit elements. */ typedef union daint_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** IN Endpoint bits */ unsigned in : 16; /** OUT Endpoint bits */ unsigned out : 16; } ep; struct { /** IN Endpoint bits */ unsigned inep0 : 1; unsigned inep1 : 1; unsigned inep2 : 1; unsigned inep3 : 1; unsigned inep4 : 1; unsigned inep5 : 1; unsigned inep6 : 1; unsigned inep7 : 1; unsigned inep8 : 1; unsigned inep9 : 1; unsigned inep10 : 1; unsigned inep11 : 1; unsigned inep12 : 1; unsigned inep13 : 1; unsigned inep14 : 1; unsigned inep15 : 1; /** OUT Endpoint bits */ unsigned outep0 : 1; unsigned outep1 : 1; unsigned outep2 : 1; unsigned outep3 : 1; unsigned outep4 : 1; unsigned outep5 : 1; unsigned outep6 : 1; unsigned outep7 : 1; unsigned outep8 : 1; unsigned outep9 : 1; unsigned outep10 : 1; unsigned outep11 : 1; unsigned outep12 : 1; unsigned outep13 : 1; unsigned outep14 : 1; unsigned outep15 : 1; } b; } daint_data_t; /** * This union represents the bit fields in the Device IN Token Queue * Read Registers. * - Read the register into the d32 member. * - READ-ONLY Register */ typedef union dtknq1_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** In Token Queue Write Pointer */ unsigned intknwptr : 5; /** Reserved */ unsigned reserved05_06 : 2; /** write pointer has wrapped. */ unsigned wrap_bit : 1; /** EP Numbers of IN Tokens 0 ... 4 */ unsigned epnums0_5 : 24; }b; } dtknq1_data_t; /** * This union represents Threshold control Register * - Read and write the register into the d32 member. * - READ-WRITABLE Register */ typedef union dthrctl_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** non ISO Tx Thr. Enable */ unsigned non_iso_thr_en : 1; /** ISO Tx Thr. Enable */ unsigned iso_thr_en : 1; /** Tx Thr. Length */ unsigned tx_thr_len : 9; /** Reserved */ unsigned reserved11_15 : 5; /** Rx Thr. Enable */ unsigned rx_thr_en : 1; /** Rx Thr. Length */ unsigned rx_thr_len : 9; /** Reserved */ unsigned reserved26_31 : 6; }b; } dthrctl_data_t; /** * Device Logical IN Endpoint-Specific Registers. Offsets * 900h-AFCh * * There will be one set of endpoint registers per logical endpoint * implemented. * * These registers are visible only in Device mode and must not be * accessed in Host mode, as the results are unknown. */ typedef struct dwc_otg_dev_in_ep_regs { /** Device IN Endpoint Control Register. Offset:900h + * (ep_num * 20h) + 00h */ volatile uint32_t diepctl; /** Reserved. Offset:900h + (ep_num * 20h) + 04h */ uint32_t reserved04; /** Device IN Endpoint Interrupt Register. Offset:900h + * (ep_num * 20h) + 08h */ volatile uint32_t diepint; /** Reserved. Offset:900h + (ep_num * 20h) + 0Ch */ uint32_t reserved0C; /** Device IN Endpoint Transfer Size * Register. Offset:900h + (ep_num * 20h) + 10h */ volatile uint32_t dieptsiz; /** Device IN Endpoint DMA Address Register. Offset:900h + * (ep_num * 20h) + 14h */ volatile uint32_t diepdma; /** Device IN Endpoint Transmit FIFO Status Register. Offset:900h + * (ep_num * 20h) + 18h */ volatile uint32_t dtxfsts; /** Device IN Endpoint DMA Buffer Register. Offset:900h + * (ep_num * 20h) + 1Ch */ volatile uint32_t diepdmab; } dwc_otg_dev_in_ep_regs_t; /** * Device Logical OUT Endpoint-Specific Registers. Offsets: * B00h-CFCh * * There will be one set of endpoint registers per logical endpoint * implemented. * * These registers are visible only in Device mode and must not be * accessed in Host mode, as the results are unknown. */ typedef struct dwc_otg_dev_out_ep_regs { /** Device OUT Endpoint Control Register. Offset:B00h + * (ep_num * 20h) + 00h */ volatile uint32_t doepctl; /** Device OUT Endpoint Frame number Register. Offset: * B00h + (ep_num * 20h) + 04h */ volatile uint32_t doepfn; /** Device OUT Endpoint Interrupt Register. Offset:B00h + * (ep_num * 20h) + 08h */ volatile uint32_t doepint; /** Reserved. Offset:B00h + (ep_num * 20h) + 0Ch */ uint32_t reserved0C; /** Device OUT Endpoint Transfer Size Register. Offset: * B00h + (ep_num * 20h) + 10h */ volatile uint32_t doeptsiz; /** Device OUT Endpoint DMA Address Register. Offset:B00h * + (ep_num * 20h) + 14h */ volatile uint32_t doepdma; /** Reserved. Offset:B00h + * (ep_num * 20h) + 1Ch */ uint32_t unused; /** Device OUT Endpoint DMA Buffer Register. Offset:B00h * + (ep_num * 20h) + 1Ch */ uint32_t doepdmab; } dwc_otg_dev_out_ep_regs_t; /** * This union represents the bit fields in the Device EP Control * Register. Read the register into the d32 member then * set/clear the bits using the bit elements. */ typedef union depctl_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Maximum Packet Size * IN/OUT EPn * IN/OUT EP0 - 2 bits * 2'b00: 64 Bytes * 2'b01: 32 * 2'b10: 16 * 2'b11: 8 */ unsigned mps : 11; #define DWC_DEP0CTL_MPS_64 0 #define DWC_DEP0CTL_MPS_32 1 #define DWC_DEP0CTL_MPS_16 2 #define DWC_DEP0CTL_MPS_8 3 /** Next Endpoint * IN EPn/IN EP0 * OUT EPn/OUT EP0 - reserved */ unsigned nextep : 4; /** USB Active Endpoint */ unsigned usbactep : 1; /** Endpoint DPID (INTR/Bulk IN and OUT endpoints) * This field contains the PID of the packet going to * be received or transmitted on this endpoint. The * application should program the PID of the first * packet going to be received or transmitted on this * endpoint , after the endpoint is * activated. Application use the SetD1PID and * SetD0PID fields of this register to program either * D0 or D1 PID. * * The encoding for this field is * - 0: D0 * - 1: D1 */ unsigned dpid : 1; /** NAK Status */ unsigned naksts : 1; /** Endpoint Type * 2'b00: Control * 2'b01: Isochronous * 2'b10: Bulk * 2'b11: Interrupt */ unsigned eptype : 2; /** Snoop Mode * OUT EPn/OUT EP0 * IN EPn/IN EP0 - reserved */ unsigned snp : 1; /** Stall Handshake */ unsigned stall : 1; /** Tx Fifo Number * IN EPn/IN EP0 * OUT EPn/OUT EP0 - reserved */ unsigned txfnum : 4; /** Clear NAK */ unsigned cnak : 1; /** Set NAK */ unsigned snak : 1; /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints) * Writing to this field sets the Endpoint DPID (DPID) * field in this register to DATA0. Set Even * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints) * Writing to this field sets the Even/Odd * (micro)frame (EO_FrNum) field to even (micro) * frame. */ unsigned setd0pid : 1; /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints) * Writing to this field sets the Endpoint DPID (DPID) * field in this register to DATA1 Set Odd * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints) * Writing to this field sets the Even/Odd * (micro)frame (EO_FrNum) field to odd (micro) frame. */ unsigned setd1pid : 1; /** Endpoint Disable */ unsigned epdis : 1; /** Endpoint Enable */ unsigned epena : 1; } b; } depctl_data_t; /** * This union represents the bit fields in the Device EP Transfer * Size Register. Read the register into the d32 member then * set/clear the bits using the bit elements. */ typedef union deptsiz_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Transfer size */ unsigned xfersize : 19; /** Packet Count */ unsigned pktcnt : 10; /** Multi Count - Periodic IN endpoints */ unsigned mc : 2; unsigned reserved : 1; } b; } deptsiz_data_t; /** * This union represents the bit fields in the Device EP 0 Transfer * Size Register. Read the register into the d32 member then * set/clear the bits using the bit elements. */ typedef union deptsiz0_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Transfer size */ unsigned xfersize : 7; /** Reserved */ unsigned reserved7_18 : 12; /** Packet Count */ unsigned pktcnt : 1; /** Reserved */ unsigned reserved20_28 : 9; /**Setup Packet Count (DOEPTSIZ0 Only) */ unsigned supcnt : 2; unsigned reserved31; } b; } deptsiz0_data_t; ///////////////////////////////////////////////// // DMA Descriptor Specific Structures // /** Buffer status definitions */ #define BS_HOST_READY 0x0 #define BS_DMA_BUSY 0x1 #define BS_DMA_DONE 0x2 #define BS_HOST_BUSY 0x3 /** Receive/Transmit status definitions */ #define RTS_SUCCESS 0x0 #define RTS_BUFFLUSH 0x1 #define RTS_RESERVED 0x2 #define RTS_BUFERR 0x3 /** * This union represents the bit fields in the DMA Descriptor * status quadlet. Read the quadlet into the d32 member then * set/clear the bits using the bit, b_iso_out and * b_iso_in elements. */ typedef union desc_sts_data { /** raw register data */ uint32_t d32; /** quadlet bits */ struct { /** Received number of bytes */ unsigned bytes : 16; unsigned reserved16_22 : 7; /** Multiple Transfer - only for OUT EPs */ unsigned mtrf : 1; /** Setup Packet received - only for OUT EPs */ unsigned sr : 1; /** Interrupt On Complete */ unsigned ioc : 1; /** Short Packet */ unsigned sp : 1; /** Last */ unsigned l : 1; /** Receive Status */ unsigned sts : 2; /** Buffer Status */ unsigned bs : 2; } b; #ifdef DWC_EN_ISOC /** iso out quadlet bits */ struct { /** Received number of bytes */ unsigned rxbytes : 11; unsigned reserved11 : 1; /** Frame Number */ unsigned framenum : 11; /** Received ISO Data PID */ unsigned pid : 2; /** Interrupt On Complete */ unsigned ioc : 1; /** Short Packet */ unsigned sp : 1; /** Last */ unsigned l : 1; /** Receive Status */ unsigned rxsts : 2; /** Buffer Status */ unsigned bs : 2; } b_iso_out; /** iso in quadlet bits */ struct { /** Transmited number of bytes */ unsigned txbytes : 12; /** Frame Number */ unsigned framenum : 11; /** Transmited ISO Data PID */ unsigned pid : 2; /** Interrupt On Complete */ unsigned ioc : 1; /** Short Packet */ unsigned sp : 1; /** Last */ unsigned l : 1; /** Transmit Status */ unsigned txsts : 2; /** Buffer Status */ unsigned bs : 2; } b_iso_in; #endif //DWC_EN_ISOC } desc_sts_data_t; /** * DMA Descriptor structure * * DMA Descriptor structure contains two quadlets: * Status quadlet and Data buffer pointer. */ typedef struct dwc_otg_dma_desc { /** DMA Descriptor status quadlet */ desc_sts_data_t status; /** DMA Descriptor data buffer pointer */ dma_addr_t buf; } dwc_otg_dma_desc_t; /** * The dwc_otg_dev_if structure contains information needed to manage * the DWC_otg controller acting in device mode. It represents the * programming view of the device-specific aspects of the controller. */ typedef struct dwc_otg_dev_if { /** Pointer to device Global registers. * Device Global Registers starting at offset 800h */ dwc_otg_device_global_regs_t *dev_global_regs; #define DWC_DEV_GLOBAL_REG_OFFSET 0x800 /** * Device Logical IN Endpoint-Specific Registers 900h-AFCh */ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; #define DWC_DEV_IN_EP_REG_OFFSET 0x900 #define DWC_EP_REG_OFFSET 0x20 /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS]; #define DWC_DEV_OUT_EP_REG_OFFSET 0xB00 /* Device configuration information*/ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/ /** Size of periodic FIFOs (Bytes) */ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS]; /** Size of Tx FIFOs (Bytes) */ uint16_t tx_fifo_size[MAX_TX_FIFOS]; /** Thresholding enable flags and length varaiables **/ uint16_t rx_thr_en; uint16_t iso_tx_thr_en; uint16_t non_iso_tx_thr_en; uint16_t rx_thr_length; uint16_t tx_thr_length; /** * Pointers to the DMA Descriptors for EP0 Control * transfers (virtual and physical) */ /** 2 descriptors for SETUP packets */ uint32_t dma_setup_desc_addr[2]; dwc_otg_dma_desc_t* setup_desc_addr[2]; /** Pointer to Descriptor with latest SETUP packet */ dwc_otg_dma_desc_t* psetup; /** Index of current SETUP handler descriptor */ uint32_t setup_desc_index; /** Descriptor for Data In or Status In phases */ uint32_t dma_in_desc_addr; dwc_otg_dma_desc_t* in_desc_addr;; /** Descriptor for Data Out or Status Out phases */ uint32_t dma_out_desc_addr; dwc_otg_dma_desc_t* out_desc_addr; } dwc_otg_dev_if_t; ///////////////////////////////////////////////// // Host Mode Register Structures // /** * The Host Global Registers structure defines the size and relative * field offsets for the Host Mode Global Registers. Host Global * Registers offsets 400h-7FFh. */ typedef struct dwc_otg_host_global_regs { /** Host Configuration Register. Offset: 400h */ volatile uint32_t hcfg; /** Host Frame Interval Register. Offset: 404h */ volatile uint32_t hfir; /** Host Frame Number / Frame Remaining Register. Offset: 408h */ volatile uint32_t hfnum; /** Reserved. Offset: 40Ch */ uint32_t reserved40C; /** Host Periodic Transmit FIFO/ Queue Status Register. Offset: 410h */ volatile uint32_t hptxsts; /** Host All Channels Interrupt Register. Offset: 414h */ volatile uint32_t haint; /** Host All Channels Interrupt Mask Register. Offset: 418h */ volatile uint32_t haintmsk; } dwc_otg_host_global_regs_t; /** * This union represents the bit fields in the Host Configuration Register. * Read the register into the d32 member then set/clear the bits using * the bit elements. Write the d32 member to the hcfg register. */ typedef union hcfg_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** FS/LS Phy Clock Select */ unsigned fslspclksel : 2; #define DWC_HCFG_30_60_MHZ 0 #define DWC_HCFG_48_MHZ 1 #define DWC_HCFG_6_MHZ 2 /** FS/LS Only Support */ unsigned fslssupp : 1; } b; } hcfg_data_t; /** * This union represents the bit fields in the Host Frame Remaing/Number * Register. */ typedef union hfir_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned frint : 16; unsigned reserved : 16; } b; } hfir_data_t; /** * This union represents the bit fields in the Host Frame Remaing/Number * Register. */ typedef union hfnum_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned frnum : 16; #define DWC_HFNUM_MAX_FRNUM 0x3FFF unsigned frrem : 16; } b; } hfnum_data_t; typedef union hptxsts_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned ptxfspcavail : 16; unsigned ptxqspcavail : 8; /** Top of the Periodic Transmit Request Queue * - bit 24 - Terminate (last entry for the selected channel) * - bits 26:25 - Token Type * - 2'b00 - Zero length * - 2'b01 - Ping * - 2'b10 - Disable * - bits 30:27 - Channel Number * - bit 31 - Odd/even microframe */ unsigned ptxqtop_terminate : 1; unsigned ptxqtop_token : 2; unsigned ptxqtop_chnum : 4; unsigned ptxqtop_odd : 1; } b; } hptxsts_data_t; /** * This union represents the bit fields in the Host Port Control and Status * Register. Read the register into the d32 member then set/clear the * bits using the bit elements. Write the d32 member to the * hprt0 register. */ typedef union hprt0_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned prtconnsts : 1; unsigned prtconndet : 1; unsigned prtena : 1; unsigned prtenchng : 1; unsigned prtovrcurract : 1; unsigned prtovrcurrchng : 1; unsigned prtres : 1; unsigned prtsusp : 1; unsigned prtrst : 1; unsigned reserved9 : 1; unsigned prtlnsts : 2; unsigned prtpwr : 1; unsigned prttstctl : 4; unsigned prtspd : 2; #define DWC_HPRT0_PRTSPD_HIGH_SPEED 0 #define DWC_HPRT0_PRTSPD_FULL_SPEED 1 #define DWC_HPRT0_PRTSPD_LOW_SPEED 2 unsigned reserved19_31 : 13; } b; } hprt0_data_t; /** * This union represents the bit fields in the Host All Interrupt * Register. */ typedef union haint_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned ch0 : 1; unsigned ch1 : 1; unsigned ch2 : 1; unsigned ch3 : 1; unsigned ch4 : 1; unsigned ch5 : 1; unsigned ch6 : 1; unsigned ch7 : 1; unsigned ch8 : 1; unsigned ch9 : 1; unsigned ch10 : 1; unsigned ch11 : 1; unsigned ch12 : 1; unsigned ch13 : 1; unsigned ch14 : 1; unsigned ch15 : 1; unsigned reserved : 16; } b; struct { unsigned chint : 16; unsigned reserved : 16; } b2; } haint_data_t; /** * This union represents the bit fields in the Host All Interrupt * Register. */ typedef union haintmsk_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned ch0 : 1; unsigned ch1 : 1; unsigned ch2 : 1; unsigned ch3 : 1; unsigned ch4 : 1; unsigned ch5 : 1; unsigned ch6 : 1; unsigned ch7 : 1; unsigned ch8 : 1; unsigned ch9 : 1; unsigned ch10 : 1; unsigned ch11 : 1; unsigned ch12 : 1; unsigned ch13 : 1; unsigned ch14 : 1; unsigned ch15 : 1; unsigned reserved : 16; } b; struct { unsigned chint : 16; unsigned reserved : 16; } b2; } haintmsk_data_t; /** * Host Channel Specific Registers. 500h-5FCh */ typedef struct dwc_otg_hc_regs { /** Host Channel 0 Characteristic Register. Offset: 500h + (chan_num * 20h) + 00h */ volatile uint32_t hcchar; /** Host Channel 0 Split Control Register. Offset: 500h + (chan_num * 20h) + 04h */ volatile uint32_t hcsplt; /** Host Channel 0 Interrupt Register. Offset: 500h + (chan_num * 20h) + 08h */ volatile uint32_t hcint; /** Host Channel 0 Interrupt Mask Register. Offset: 500h + (chan_num * 20h) + 0Ch */ volatile uint32_t hcintmsk; /** Host Channel 0 Transfer Size Register. Offset: 500h + (chan_num * 20h) + 10h */ volatile uint32_t hctsiz; /** Host Channel 0 DMA Address Register. Offset: 500h + (chan_num * 20h) + 14h */ volatile uint32_t hcdma; /** Reserved. Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch */ uint32_t reserved[2]; } dwc_otg_hc_regs_t; /** * This union represents the bit fields in the Host Channel Characteristics * Register. Read the register into the d32 member then set/clear the * bits using the bit elements. Write the d32 member to the * hcchar register. */ typedef union hcchar_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Maximum packet size in bytes */ unsigned mps : 11; /** Endpoint number */ unsigned epnum : 4; /** 0: OUT, 1: IN */ unsigned epdir : 1; unsigned reserved : 1; /** 0: Full/high speed device, 1: Low speed device */ unsigned lspddev : 1; /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */ unsigned eptype : 2; /** Packets per frame for periodic transfers. 0 is reserved. */ unsigned multicnt : 2; /** Device address */ unsigned devaddr : 7; /** * Frame to transmit periodic transaction. * 0: even, 1: odd */ unsigned oddfrm : 1; /** Channel disable */ unsigned chdis : 1; /** Channel enable */ unsigned chen : 1; } b; } hcchar_data_t; typedef union hcsplt_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Port Address */ unsigned prtaddr : 7; /** Hub Address */ unsigned hubaddr : 7; /** Transaction Position */ unsigned xactpos : 2; #define DWC_HCSPLIT_XACTPOS_MID 0 #define DWC_HCSPLIT_XACTPOS_END 1 #define DWC_HCSPLIT_XACTPOS_BEGIN 2 #define DWC_HCSPLIT_XACTPOS_ALL 3 /** Do Complete Split */ unsigned compsplt : 1; /** Reserved */ unsigned reserved : 14; /** Split Enble */ unsigned spltena : 1; } b; } hcsplt_data_t; /** * This union represents the bit fields in the Host All Interrupt * Register. */ typedef union hcint_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Transfer Complete */ unsigned xfercomp : 1; /** Channel Halted */ unsigned chhltd : 1; /** AHB Error */ unsigned ahberr : 1; /** STALL Response Received */ unsigned stall : 1; /** NAK Response Received */ unsigned nak : 1; /** ACK Response Received */ unsigned ack : 1; /** NYET Response Received */ unsigned nyet : 1; /** Transaction Err */ unsigned xacterr : 1; /** Babble Error */ unsigned bblerr : 1; /** Frame Overrun */ unsigned frmovrun : 1; /** Data Toggle Error */ unsigned datatglerr : 1; /** Reserved */ unsigned reserved : 21; } b; } hcint_data_t; /** * This union represents the bit fields in the Host Channel Transfer Size * Register. Read the register into the d32 member then set/clear the * bits using the bit elements. Write the d32 member to the * hcchar register. */ typedef union hctsiz_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Total transfer size in bytes */ unsigned xfersize : 19; /** Data packets to transfer */ unsigned pktcnt : 10; /** * Packet ID for next data packet * 0: DATA0 * 1: DATA2 * 2: DATA1 * 3: MDATA (non-Control), SETUP (Control) */ unsigned pid : 2; #define DWC_HCTSIZ_DATA0 0 #define DWC_HCTSIZ_DATA1 2 #define DWC_HCTSIZ_DATA2 1 #define DWC_HCTSIZ_MDATA 3 #define DWC_HCTSIZ_SETUP 3 /** Do PING protocol when 1 */ unsigned dopng : 1; } b; } hctsiz_data_t; /** * This union represents the bit fields in the Host Channel Interrupt Mask * Register. Read the register into the d32 member then set/clear the * bits using the bit elements. Write the d32 member to the * hcintmsk register. */ typedef union hcintmsk_data { /** raw register data */ uint32_t d32; /** register bits */ struct { unsigned xfercompl : 1; unsigned chhltd : 1; unsigned ahberr : 1; unsigned stall : 1; unsigned nak : 1; unsigned ack : 1; unsigned nyet : 1; unsigned xacterr : 1; unsigned bblerr : 1; unsigned frmovrun : 1; unsigned datatglerr : 1; unsigned reserved : 21; } b; } hcintmsk_data_t; /** OTG Host Interface Structure. * * The OTG Host Interface Structure structure contains information * needed to manage the DWC_otg controller acting in host mode. It * represents the programming view of the host-specific aspects of the * controller. */ typedef struct dwc_otg_host_if { /** Host Global Registers starting at offset 400h.*/ dwc_otg_host_global_regs_t *host_global_regs; #define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400 /** Host Port 0 Control and Status Register */ volatile uint32_t *hprt0; #define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440 /** Host Channel Specific Registers at offsets 500h-5FCh. */ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; #define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500 #define DWC_OTG_CHAN_REGS_OFFSET 0x20 /* Host configuration information */ /** Number of Host Channels (range: 1-16) */ uint8_t num_host_channels; /** Periodic EPs supported (0: no, 1: yes) */ uint8_t perio_eps_supported; /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */ uint16_t perio_tx_fifo_size; } dwc_otg_host_if_t; /** * This union represents the bit fields in the Power and Clock Gating Control * Register. Read the register into the d32 member then set/clear the * bits using the bit elements. */ typedef union pcgcctl_data { /** raw register data */ uint32_t d32; /** register bits */ struct { /** Stop Pclk */ unsigned stoppclk : 1; /** Gate Hclk */ unsigned gatehclk : 1; /** Power Clamp */ unsigned pwrclmp : 1; /** Reset Power Down Modules */ unsigned rstpdwnmodule : 1; /** PHY Suspended */ unsigned physuspended : 1; unsigned reserved : 27; } b; } pcgcctl_data_t; #endif