--- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -899,5 +899,12 @@ config PATA_LEGACY If unsure, say N. +config PATA_RB_PPC + tristate "MikroTik RB600 PATA support" + depends on RB_PPC + help + This option enables support for PATA devices on MikroTik RouterBOARD + 600 series boards. + endif # ATA_SFF endif # ATA --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -89,6 +89,7 @@ obj-$(CONFIG_PATA_PALMLD) += pata_palmld obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o +obj-$(CONFIG_PATA_RB_PPC) += pata_rbppc_cf.o obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o --- /dev/null +++ b/drivers/ata/pata_rbppc_cf.c @@ -0,0 +1,699 @@ +/* + * Copyright (C) 2008-2009 Noah Fontes + * Copyright (C) Mikrotik 2007 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DEBUG_UPM 0 + +#define DRV_NAME "pata_rbppc_cf" +#define DRV_VERSION "0.0.2" + +#define DEV2SEL_OFFSET 0x00100000 + +#define IMMR_LBCFG_OFFSET 0x00005000 +#define IMMR_LBCFG_SIZE 0x00001000 + +#define LOCAL_BUS_MCMR 0x00000078 +#define MxMR_OP_MASK 0x30000000 +#define MxMR_OP_NORMAL 0x00000000 +#define MxMR_OP_WRITE 0x10000000 +#define MxMR_OP_READ 0x20000000 +#define MxMR_OP_RUN 0x30000000 +#define MxMR_LUPWAIT_LOW 0x08000000 +#define MxMR_LUPWAIT_HIGH 0x00000000 +#define MxMR_LUPWAIT_ENABLE 0x00040000 +#define MxMR_RLF_MASK 0x0003c000 +#define MxMR_RLF_SHIFT 14 +#define MxMR_WLF_MASK 0x00003c00 +#define MxMR_WLF_SHIFT 10 +#define MxMR_MAD_MASK 0x0000003f +#define LOCAL_BUS_MDR 0x00000088 +#define LOCAL_BUS_LCRR 0x000000D4 +#define LCRR_CLKDIV_MASK 0x0000000f + +#define LOOP_SIZE 4 + +#define UPM_READ_SINGLE_OFFSET 0x00 +#define UPM_WRITE_SINGLE_OFFSET 0x18 +#define UPM_DATA_SIZE 0x40 + +#define LBT_CPUIN_MIN 0 +#define LBT_CPUOUT_MIN 1 +#define LBT_CPUOUT_MAX 2 +#define LBT_EXTDEL_MIN 3 +#define LBT_EXTDEL_MAX 4 +#define LBT_SIZE 5 + +/* UPM machine configuration bits */ +#define N_BASE 0x00f00000 +#define N_CS 0xf0000000 +#define N_CS_H1 0xc0000000 +#define N_CS_H2 0x30000000 +#define N_WE 0x0f000000 +#define N_WE_H1 0x0c000000 +#define N_WE_H2 0x03000000 +#define N_OE 0x00030000 +#define N_OE_H1 0x00020000 +#define N_OE_H2 0x00010000 +#define WAEN 0x00001000 +#define REDO_2 0x00000100 +#define REDO_3 0x00000200 +#define REDO_4 0x00000300 +#define LOOP 0x00000080 +#define NA 0x00000008 +#define UTA 0x00000004 +#define LAST 0x00000001 + +#define REDO_VAL(mult) (REDO_2 * ((mult) - 1)) +#define REDO_MAX_MULT 4 + +#define READ_BASE (N_BASE | N_WE) +#define WRITE_BASE (N_BASE | N_OE) +#define EMPTY (N_BASE | N_CS | N_OE | N_WE | LAST) + +#define EOF_UPM_SETTINGS 0 +#define ANOTHER_TIMING 1 + +#define OA_CPUIN_MIN 0x01 +#define OA_CPUOUT_MAX 0x02 +#define OD_CPUOUT_MIN 0x04 +#define OA_CPUOUT_DELTA 0x06 +#define OA_EXTDEL_MAX 0x08 +#define OD_EXTDEL_MIN 0x10 +#define OA_EXTDEL_DELTA 0x18 +#define O_MIN_CYCLE_TIME 0x20 +#define O_MINUS_PREV 0x40 +#define O_HALF_CYCLE 0x80 + +extern void __iomem *localbus_map(unsigned long addr, unsigned int len); +extern void localbus_unmap(void __iomem *addr); + +struct rbppc_cf_info { + unsigned lbcfg_addr; + unsigned clk_time_ps; + int cur_mode; + u32 lb_timings[LBT_SIZE]; +}; +static struct rbppc_cf_info *rbinfo = NULL; + +struct upm_setting { + unsigned value; + unsigned ns[7]; + unsigned clk_minus; + unsigned group_size; + unsigned options; +}; + +static const struct upm_setting cfUpmReadSingle[] = { + { READ_BASE | N_OE, + /* t1 - ADDR setup time */ + { 70, 50, 30, 30, 25, 15, 10 }, 0, 0, (OA_CPUOUT_DELTA | + OA_EXTDEL_MAX) }, + { READ_BASE | N_OE_H1, + { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE }, + { READ_BASE, + /* t2 - OE0 time */ + { 290, 290, 290, 80, 70, 65, 55 }, 0, 2, (OA_CPUOUT_MAX | + OA_CPUIN_MIN) }, + { READ_BASE | WAEN, + { 1, 1, 1, 1, 1, 0, 0 }, 0, 0, 0 }, + { READ_BASE | UTA, + { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 }, + { READ_BASE | N_OE, + /* t9 - ADDR hold time */ + { 20, 15, 10, 10, 10, 10, 10 }, 0, 0, (OA_CPUOUT_DELTA | + OD_EXTDEL_MIN) }, + { READ_BASE | N_OE | N_CS_H2, + { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE }, + { READ_BASE | N_OE | N_CS, + /* t6Z -IORD data tristate */ + { 30, 30, 30, 30, 30, 20, 20 }, 1, 1, O_MINUS_PREV }, + { ANOTHER_TIMING, + /* t2i -IORD recovery time */ + { 0, 0, 0, 70, 25, 25, 20 }, 2, 0, 0 }, + { ANOTHER_TIMING, + /* CS 0 -> 1 MAX */ + { 0, 0, 0, 0, 0, 0, 0 }, 1, 0, (OA_CPUOUT_DELTA | + OA_EXTDEL_MAX) }, + { READ_BASE | N_OE | N_CS | LAST, + { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 }, + { EOF_UPM_SETTINGS, + /* min total cycle time - includes turnaround and ALE cycle */ + { 600, 383, 240, 180, 120, 100, 80 }, 2, 0, O_MIN_CYCLE_TIME }, +}; + +static const struct upm_setting cfUpmWriteSingle[] = { + { WRITE_BASE | N_WE, + /* t1 - ADDR setup time */ + { 70, 50, 30, 30, 25, 15, 10 }, 0, 0, (OA_CPUOUT_DELTA | + OA_EXTDEL_MAX) }, + { WRITE_BASE | N_WE_H1, + { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE }, + { WRITE_BASE, + /* t2 - WE0 time */ + { 290, 290, 290, 80, 70, 65, 55 }, 0, 1, OA_CPUOUT_DELTA }, + { WRITE_BASE | WAEN, + { 1, 1, 1, 1, 1, 0, 0 }, 0, 0, 0 }, + { WRITE_BASE | N_WE, + /* t9 - ADDR hold time */ + { 20, 15, 10, 10, 10, 10, 10 }, 0, 0, (OA_CPUOUT_DELTA | + OD_EXTDEL_MIN) }, + { WRITE_BASE | N_WE | N_CS_H2, + { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, O_HALF_CYCLE }, + { WRITE_BASE | N_WE | N_CS, + /* t4 - DATA hold time */ + { 30, 20, 15, 10, 10, 10, 10 }, 0, 1, O_MINUS_PREV }, + { ANOTHER_TIMING, + /* t2i -IOWR recovery time */ + { 0, 0, 0, 70, 25, 25, 20 }, 1, 0, 0 }, + { ANOTHER_TIMING, + /* CS 0 -> 1 MAX */ + { 0, 0, 0, 0, 0, 0, 0 }, 0, 0, (OA_CPUOUT_DELTA | + OA_EXTDEL_MAX) }, + { WRITE_BASE | N_WE | N_CS | UTA | LAST, + { 1, 1, 1, 1, 1, 1, 1 }, 0, 0, 0 }, + /* min total cycle time - includes ALE cycle */ + { EOF_UPM_SETTINGS, + { 600, 383, 240, 180, 120, 100, 80 }, 1, 0, O_MIN_CYCLE_TIME }, +}; + +static u8 rbppc_cf_check_status(struct ata_port *ap) { + u8 val = ioread8(ap->ioaddr.status_addr); + if (val == 0xF9) + val = 0x7F; + return val; +} + +static u8 rbppc_cf_check_altstatus(struct ata_port *ap) { + u8 val = ioread8(ap->ioaddr.altstatus_addr); + if (val == 0xF9) + val = 0x7F; + return val; +} + +static void rbppc_cf_dummy_noret(struct ata_port *ap) { } +static int rbppc_cf_dummy_ret0(struct ata_port *ap) { return 0; } + +static int ps2clk(int ps, unsigned clk_time_ps) { + int psMaxOver; + if (ps <= 0) return 0; + + /* round down if <= 2% over clk border, but no more than 1/4 clk cycle */ + psMaxOver = ps * 2 / 100; + if (4 * psMaxOver > clk_time_ps) { + psMaxOver = clk_time_ps / 4; + } + return (ps + clk_time_ps - 1 - psMaxOver) / clk_time_ps; +} + +static int upm_gen_ps_table(const struct upm_setting *upm, + int mode, struct rbppc_cf_info *info, + int *psFinal) { + int uidx; + int lastUpmValIdx = 0; + int group_start_idx = -1; + int group_left_num = -1; + int clk_time_ps = info->clk_time_ps; + + for (uidx = 0; upm[uidx].value != EOF_UPM_SETTINGS; ++uidx) { + const struct upm_setting *us = upm + uidx; + unsigned opt = us->options; + int ps = us->ns[mode] * 1000 - us->clk_minus * clk_time_ps; + + if (opt & OA_CPUIN_MIN) ps += info->lb_timings[LBT_CPUIN_MIN]; + if (opt & OD_CPUOUT_MIN) ps -= info->lb_timings[LBT_CPUOUT_MIN]; + if (opt & OA_CPUOUT_MAX) ps += info->lb_timings[LBT_CPUOUT_MAX]; + if (opt & OD_EXTDEL_MIN) ps -= info->lb_timings[LBT_EXTDEL_MIN]; + if (opt & OA_EXTDEL_MAX) ps += info->lb_timings[LBT_EXTDEL_MAX]; + + if (us->value == ANOTHER_TIMING) { + /* use longest timing from alternatives */ + if (psFinal[lastUpmValIdx] < ps) { + psFinal[lastUpmValIdx] = ps; + } + ps = 0; + } + else { + if (us->group_size) { + group_start_idx = uidx; + group_left_num = us->group_size; + } + else if (group_left_num > 0) { + /* group time is divided on all group members */ + int clk = ps2clk(ps, clk_time_ps); + psFinal[group_start_idx] -= clk * clk_time_ps; + --group_left_num; + } + if ((opt & O_MINUS_PREV) && lastUpmValIdx > 0) { + int clk = ps2clk(psFinal[lastUpmValIdx], + clk_time_ps); + ps -= clk * clk_time_ps; + } + lastUpmValIdx = uidx; + } + psFinal[uidx] = ps; + } + return uidx; +} + +static int free_half(int ps, int clk, int clk_time_ps) { + if (clk < 2) return 0; + return (clk * clk_time_ps - ps) * 2 >= clk_time_ps; +} + +static void upm_gen_clk_table(const struct upm_setting *upm, + int mode, int clk_time_ps, + int max_uidx, const int *psFinal, int *clkFinal) { + int clk_cycle_time; + int clk_total; + int uidx; + + /* convert picoseconds to clocks */ + clk_total = 0; + for (uidx = 0; uidx < max_uidx; ++uidx) { + int clk = ps2clk(psFinal[uidx], clk_time_ps); + clkFinal[uidx] = clk; + clk_total += clk; + } + + /* check possibility of half cycle usage */ + for (uidx = 1; uidx < max_uidx - 1; ++uidx) { + if ((upm[uidx].options & O_HALF_CYCLE) && + free_half(psFinal[uidx - 1], clkFinal[uidx - 1], + clk_time_ps) && + free_half(psFinal[uidx + 1], clkFinal[uidx + 1], + clk_time_ps)) { + ++clkFinal[uidx]; + --clkFinal[uidx - 1]; + --clkFinal[uidx + 1]; + } + } + + if ((upm[max_uidx].options & O_MIN_CYCLE_TIME) == 0) return; + + /* check cycle time, adjust timings if needed */ + clk_cycle_time = (ps2clk(upm[max_uidx].ns[mode] * 1000, clk_time_ps) - + upm[max_uidx].clk_minus); + uidx = 0; + while (clk_total < clk_cycle_time) { + /* extend all timings in round-robin to match cycle time */ + if (clkFinal[uidx]) { +#if DEBUG_UPM + printk(KERN_INFO "extending %u by 1 clk\n", uidx); +#endif + ++clkFinal[uidx]; + ++clk_total; + } + ++uidx; + if (uidx == max_uidx) uidx = 0; + } +} + +static void add_data_val(unsigned val, int *clkLeft, int maxClk, + unsigned *data, int *dataIdx) { + if (*clkLeft == 0) return; + + if (maxClk == 0 && *clkLeft >= LOOP_SIZE * 2) { + int times; + int times1; + int times2; + + times = *clkLeft / LOOP_SIZE; + if (times > REDO_MAX_MULT * 2) times = REDO_MAX_MULT * 2; + times1 = times / 2; + times2 = times - times1; + + val |= LOOP; + data[*dataIdx] = val | REDO_VAL(times1); + ++(*dataIdx); + data[*dataIdx] = val | REDO_VAL(times2); + ++(*dataIdx); + + *clkLeft -= times * LOOP_SIZE; + return; + } + + if (maxClk < 1 || maxClk > REDO_MAX_MULT) maxClk = REDO_MAX_MULT; + if (*clkLeft < maxClk) maxClk = *clkLeft; + + *clkLeft -= maxClk; + val |= REDO_VAL(maxClk); + + data[*dataIdx] = val; + ++(*dataIdx); +} + +static int upm_gen_final_data(const struct upm_setting *upm, + int max_uidx, int *clkFinal, unsigned *data) { + int dataIdx; + int uidx; + + dataIdx = 0; + for (uidx = 0; uidx < max_uidx; ++uidx) { + int clk = clkFinal[uidx]; + while (clk > 0) { + add_data_val(upm[uidx].value, &clk, 0, + data, &dataIdx); + } + } + return dataIdx; +} + +static int conv_upm_table(const struct upm_setting *upm, + int mode, struct rbppc_cf_info *info, + unsigned *data) { +#if DEBUG_UPM + int uidx; +#endif + int psFinal[32]; + int clkFinal[32]; + int max_uidx; + int data_len; + + max_uidx = upm_gen_ps_table(upm, mode, info, psFinal); + + upm_gen_clk_table(upm, mode, info->clk_time_ps, max_uidx, + psFinal, clkFinal); + +#if DEBUG_UPM + /* dump out debug info */ + for (uidx = 0; uidx < max_uidx; ++uidx) { + if (clkFinal[uidx]) { + printk(KERN_INFO "idx %d val %08x clk %d ps %d\n", + uidx, upm[uidx].value, + clkFinal[uidx], psFinal[uidx]); + } + } +#endif + + data_len = upm_gen_final_data(upm, max_uidx, clkFinal, data); + +#if DEBUG_UPM + for (uidx = 0; uidx < data_len; ++uidx) { + printk(KERN_INFO "cf UPM x result: idx %d val %08x\n", + uidx, data[uidx]); + } +#endif + return 0; +} + +static int gen_upm_data(int mode, struct rbppc_cf_info *info, unsigned *data) { + int i; + + for (i = 0; i < UPM_DATA_SIZE; ++i) { + data[i] = EMPTY; + } + + if (conv_upm_table(cfUpmReadSingle, mode, info, data + UPM_READ_SINGLE_OFFSET)) { + return -1; + } + if (conv_upm_table(cfUpmWriteSingle, mode, info, data + UPM_WRITE_SINGLE_OFFSET)) { + return -1; + } + return 0; +} + +static void rbppc_cf_program_upm(void *upmMemAddr, volatile void *lbcfg_mxmr, volatile void *lbcfg_mdr, const unsigned *upmData, unsigned offset, unsigned len) { + unsigned i; + unsigned mxmr; + + mxmr = in_be32(lbcfg_mxmr); + mxmr &= ~(MxMR_OP_MASK | MxMR_MAD_MASK); + mxmr |= (MxMR_OP_WRITE | offset); + out_be32(lbcfg_mxmr, mxmr); + in_be32(lbcfg_mxmr); /* flush MxMR write */ + + for (i = 0; i < len; ++i) { + int to; + unsigned data = upmData[i + offset]; + out_be32(lbcfg_mdr, data); + in_be32(lbcfg_mdr); /* flush MDR write */ + + iowrite8(1, upmMemAddr); /* dummy write to any CF addr */ + + /* wait for dummy write to complete */ + for (to = 10000; to >= 0; --to) { + mxmr = in_be32(lbcfg_mxmr); + if (((mxmr ^ (i + 1)) & MxMR_MAD_MASK) == 0) { + break; + } + if (to == 0) { + printk(KERN_ERR "rbppc_cf_program_upm: UPMx program error at 0x%x: Timeout\n", i); + } + } + } + mxmr &= ~(MxMR_OP_MASK | MxMR_RLF_MASK | MxMR_WLF_MASK); + mxmr |= (MxMR_OP_NORMAL | (LOOP_SIZE << MxMR_RLF_SHIFT) | (LOOP_SIZE << MxMR_WLF_SHIFT)); + out_be32(lbcfg_mxmr, mxmr); +} + +static int rbppc_cf_update_piomode(struct ata_port *ap, int mode) { + struct rbppc_cf_info *info = (struct rbppc_cf_info *)ap->host->private_data; + void *lbcfgBase; + unsigned upmData[UPM_DATA_SIZE]; + + if (gen_upm_data(mode, info, upmData)) { + return -1; + } + + lbcfgBase = ioremap_nocache(info->lbcfg_addr, IMMR_LBCFG_SIZE); + + rbppc_cf_program_upm(ap->ioaddr.cmd_addr, ((char *)lbcfgBase) + LOCAL_BUS_MCMR, ((char *)lbcfgBase) + LOCAL_BUS_MDR, upmData, 0, UPM_DATA_SIZE); + iounmap(lbcfgBase); + return 0; +} + +static void rbppc_cf_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct rbppc_cf_info *info = (struct rbppc_cf_info *)ap->host->private_data; + int mode = adev->pio_mode - XFER_PIO_0; + + DPRINTK("rbppc_cf_set_piomode: PIO %d\n", mode); + if (mode < 0) mode = 0; + if (mode > 6) mode = 6; + + if (info->cur_mode < 0 || info->cur_mode > mode) { + if (rbppc_cf_update_piomode(ap, mode) == 0) { + printk(KERN_INFO "rbppc_cf_set_piomode: PIO mode changed to %d\n", mode); + info->cur_mode = mode; + } + } +} + +static struct scsi_host_template rbppc_cf_sht = { + ATA_BASE_SHT(DRV_NAME), +}; + +static struct ata_port_operations rbppc_cf_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .sff_check_status = rbppc_cf_check_status, + .sff_check_altstatus = rbppc_cf_check_altstatus, + + .set_piomode = rbppc_cf_set_piomode, + + .port_start = rbppc_cf_dummy_ret0, + + .sff_irq_clear = rbppc_cf_dummy_noret, +}; + +static int rbppc_cf_init_info(struct platform_device *pdev, struct rbppc_cf_info *info) { + struct device_node *np; + struct resource res; + const u32 *u32ptr; + void *lbcfgBase; + void *lbcfg_lcrr; + unsigned lbc_clk_khz; + unsigned lbc_extra_divider = 1; + unsigned ccb_freq_hz; + unsigned lb_div; + + u32ptr = of_get_property(pdev->dev.of_node, "lbc_extra_divider", NULL); + if (u32ptr && *u32ptr) { + lbc_extra_divider = *u32ptr; +#if DEBUG_UPM + printk(KERN_INFO "rbppc_cf_init_info: LBC extra divider %u\n", + lbc_extra_divider); +#endif + } + + np = of_find_node_by_type(NULL, "serial"); + if (!np) { + printk(KERN_ERR "rbppc_cf_init_info: No serial node found\n"); + return -1; + } + u32ptr = of_get_property(np, "clock-frequency", NULL); + if (u32ptr == 0 || *u32ptr == 0) { + printk(KERN_ERR "rbppc_cf_init_info: Serial does not have clock-frequency\n"); + of_node_put(np); + return -1; + } + ccb_freq_hz = *u32ptr; + of_node_put(np); + + np = of_find_node_by_type(NULL, "soc"); + if (!np) { + printk(KERN_ERR "rbppc_cf_init_info: No soc node found\n"); + return -1; + } + if (of_address_to_resource(np, 0, &res)) { + printk(KERN_ERR "rbppc_cf_init_info: soc does not have resource\n"); + of_node_put(np); + return -1; + } + info->lbcfg_addr = res.start + IMMR_LBCFG_OFFSET; + of_node_put(np); + + lbcfgBase = ioremap_nocache(info->lbcfg_addr, IMMR_LBCFG_SIZE); + lbcfg_lcrr = ((char*)lbcfgBase) + LOCAL_BUS_LCRR; + lb_div = (in_be32(lbcfg_lcrr) & LCRR_CLKDIV_MASK) * lbc_extra_divider; + iounmap(lbcfgBase); + + lbc_clk_khz = ccb_freq_hz / (1000 * lb_div); + info->clk_time_ps = 1000000000 / lbc_clk_khz; + printk(KERN_INFO "rbppc_cf_init_info: Using Local-Bus clock %u kHz %u ps\n", + lbc_clk_khz, info->clk_time_ps); + + u32ptr = of_get_property(pdev->dev.of_node, "lb-timings", NULL); + if (u32ptr) { + memcpy(info->lb_timings, u32ptr, LBT_SIZE * sizeof(*u32ptr)); +#if DEBUG_UPM + printk(KERN_INFO "rbppc_cf_init_info: Got LB timings <%u %u %u %u %u>\n", + u32ptr[0], u32ptr[1], u32ptr[2], u32ptr[3], u32ptr[4]); +#endif + } + info->cur_mode = -1; + return 0; +} + +static int rbppc_cf_probe(struct platform_device *pdev) +{ + struct ata_host *host; + struct ata_port *ap; + struct rbppc_cf_info *info = NULL; + struct resource res; + void *baddr; + const u32 *u32ptr; + int irq_level = 0; + int err = -ENOMEM; + + printk(KERN_INFO "rbppc_cf_probe: MikroTik RouterBOARD 600 series Compact Flash PATA driver, version " DRV_VERSION "\n"); + + if (rbinfo == NULL) { + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (info == NULL) { + printk(KERN_ERR "rbppc_cf_probe: Out of memory\n"); + goto err_info; + } + memset(info, 0, sizeof(*info)); + + if (rbppc_cf_init_info(pdev, info)) { + goto err_info; + } + rbinfo = info; + } + + u32ptr = of_get_property(pdev->dev.of_node, "interrupt-at-level", NULL); + if (u32ptr) { + irq_level = *u32ptr; + printk(KERN_INFO "rbppc_cf_probe: IRQ level %u\n", irq_level); + } + + if (of_address_to_resource(pdev->dev.of_node, 0, &res)) { + printk(KERN_ERR "rbppc_cf_probe: No reg property found\n"); + goto err_info; + } + + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + goto err_info; + + baddr = localbus_map(res.start, res.end - res.start + 1); + host->iomap = baddr; + host->private_data = rbinfo; + + ap = host->ports[0]; + ap->ops = &rbppc_cf_port_ops; + ap->pio_mask = 0x7F; /* PIO modes 0-6 */ + ap->mwdma_mask = 0; + + ap->ioaddr.cmd_addr = baddr; + ata_sff_std_ports(&ap->ioaddr); + ap->ioaddr.ctl_addr = ap->ioaddr.cmd_addr + 14; + ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; + ap->ioaddr.bmdma_addr = 0; + + err = ata_host_activate( + host, + irq_of_parse_and_map(pdev->dev.of_node, 0), ata_sff_interrupt, + irq_level ? IRQF_TRIGGER_HIGH : IRQF_TRIGGER_LOW, + &rbppc_cf_sht); + if (!err) return 0; + + localbus_unmap(baddr); +err_info: + if (info) { + kfree(info); + rbinfo = NULL; + } + return err; +} + +static int rbppc_cf_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ata_host *host = dev_get_drvdata(dev); + + if (host == NULL) return -1; + + ata_host_detach(host); + return 0; +} + +static struct of_device_id rbppc_cf_ids[] = { + { .name = "cf", }, + { }, +}; + +static struct platform_driver rbppc_cf_driver = { + .probe = rbppc_cf_probe, + .remove = rbppc_cf_remove, + .driver = { + .name = "rbppc-cf", + .owner = THIS_MODULE, + .of_match_table = rbppc_cf_ids, + }, +}; + +static int __init rbppc_init(void) +{ + return platform_driver_register(&rbppc_cf_driver); +} + +static void __exit rbppc_exit(void) +{ + platform_driver_unregister(&rbppc_cf_driver); +} + +MODULE_AUTHOR("Mikrotikls SIA"); +MODULE_AUTHOR("Noah Fontes"); +MODULE_DESCRIPTION("MikroTik RouterBOARD 600 series Compact Flash PATA driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(rbppc_init); +module_exit(rbppc_exit);