/* * Atheros AP113 board support * * Copyright (C) 2011 Florian Fainelli <florian@openwrt.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. */ #include "dev-eth.h" #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-m25p80.h" #include "pci.h" #include "dev-usb.h" #include "machtypes.h" #define AP113_GPIO_LED_USB 0 #define AP113_GPIO_LED_STATUS 1 #define AP113_GPIO_LED_ST 11 #define AP113_GPIO_BTN_JUMPSTART 12 #define AP113_KEYS_POLL_INTERVAL 20 /* msecs */ #define AP113_KEYS_DEBOUNCE_INTERVAL (3 * AP113_KEYS_POLL_INTERVAL) static struct gpio_led ap113_leds_gpio[] __initdata = { { .name = "ap113:green:usb", .gpio = AP113_GPIO_LED_USB, .active_low = 1, }, { .name = "ap113:green:status", .gpio = AP113_GPIO_LED_STATUS, .active_low = 1, }, { .name = "ap113:green:st", .gpio = AP113_GPIO_LED_ST, .active_low = 1, } }; static struct gpio_keys_button ap113_gpio_keys[] __initdata = { { .desc = "jumpstart button", .type = EV_KEY, .code = KEY_WPS_BUTTON, .debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL, .gpio = AP113_GPIO_BTN_JUMPSTART, .active_low = 1, }, }; static void __init ap113_setup(void) { u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); ath79_register_m25p80(NULL); ath79_register_mdio(0, ~BIT(0)); ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ath79_eth0_data.speed = SPEED_1000; ath79_eth0_data.duplex = DUPLEX_FULL; ath79_eth0_data.phy_mask = BIT(0); ath79_register_eth(0); ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL, ARRAY_SIZE(ap113_gpio_keys), ap113_gpio_keys); ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio), ap113_leds_gpio); ath79_register_pci(); ath79_register_usb(); } MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113", ap113_setup);