From 5c105d9f3fd086aff195d3849dcf847d6b0bd927 Mon Sep 17 00:00:00 2001
From: blogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Fri, 5 Oct 2012 10:12:53 +0000
Subject: branch Attitude Adjustment

git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 target/linux/ramips/base-files/etc/diag.sh         | 139 +++++++++++++
 .../etc/hotplug.d/firmware/10-rt2x00-eeprom        | 111 +++++++++++
 target/linux/ramips/base-files/etc/inittab         |   4 +
 .../linux/ramips/base-files/etc/uci-defaults/leds  |  86 ++++++++
 .../ramips/base-files/etc/uci-defaults/network     | 217 +++++++++++++++++++++
 .../base-files/lib/preinit/03_preinit_do_ramips.sh |   7 +
 .../lib/preinit/05_ramips_load-input_drivers       |  12 ++
 .../ramips/base-files/lib/preinit/06_set_iface_mac |  66 +++++++
 target/linux/ramips/base-files/lib/ramips.sh       | 194 ++++++++++++++++++
 .../ramips/base-files/lib/upgrade/platform.sh      |  84 ++++++++
 10 files changed, 920 insertions(+)
 create mode 100755 target/linux/ramips/base-files/etc/diag.sh
 create mode 100644 target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
 create mode 100644 target/linux/ramips/base-files/etc/inittab
 create mode 100755 target/linux/ramips/base-files/etc/uci-defaults/leds
 create mode 100755 target/linux/ramips/base-files/etc/uci-defaults/network
 create mode 100644 target/linux/ramips/base-files/lib/preinit/03_preinit_do_ramips.sh
 create mode 100644 target/linux/ramips/base-files/lib/preinit/05_ramips_load-input_drivers
 create mode 100644 target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
 create mode 100755 target/linux/ramips/base-files/lib/ramips.sh
 create mode 100755 target/linux/ramips/base-files/lib/upgrade/platform.sh

(limited to 'target/linux/ramips/base-files')

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
new file mode 100755
index 000000000..472013025
--- /dev/null
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -0,0 +1,139 @@
+#!/bin/sh
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+#
+
+. /lib/ramips.sh
+
+status_led=""
+
+led_set_attr() {
+	[ -f "/sys/class/leds/$1/$2" ] && echo "$3" > "/sys/class/leds/$1/$2"
+}
+
+status_led_set_timer() {
+	led_set_attr $status_led "trigger" "timer"
+	led_set_attr $status_led "delay_on" "$1"
+	led_set_attr $status_led "delay_off" "$2"
+}
+
+status_led_on() {
+	led_set_attr $status_led "trigger" "none"
+	led_set_attr $status_led "brightness" 255
+}
+
+status_led_off() {
+	led_set_attr $status_led "trigger" "none"
+	led_set_attr $status_led "brightness" 0
+}
+
+get_status_led() {
+	case $(ramips_board_name) in
+	3g-6200n)
+		status_led="edimax:green:power"
+		;;
+	argus-atp52b)
+		status_led="argus-atp52b:green:run"
+		;;
+	dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-620-a1)
+		status_led="d-link:green:status"
+		;;
+	dap-1350)
+		status_led="d-link:blue:power"
+		;;
+	esr-9753)
+		status_led="esr-9753:orange:power"
+		;;
+	f5d8235-v2)
+		status_led="f5d8235v2:blue:router"
+		;;
+	fonera20n)
+		status_led="fonera20n:green:power"
+		;;
+	all0239-3g|\
+	hw550-3g)
+		status_led="hw550-3g:green:status"
+		;;
+	mofi3500-3gn)
+		status_led="mofi3500-3gn:green:status"
+		;;
+	nbg-419n)
+		status_led="nbg-419n:green:power"
+		;;
+	nw718)
+		status_led="nw718:amber:cpu"
+		;;
+	omni-emb)
+		status_led="emb:green:status"
+		;;
+	psr-680w)
+		status_led="psr-680w:red:wan"
+		;;
+	pwh2004)
+		status_led="pwh2004:green:power"
+		;;
+	rt-n15)
+		status_led="rt-n15:blue:power"
+		;;
+	rt-n10-plus)
+		status_led="asus:green:wps"
+		;;
+	rt-n56u | wl-330n | wl-330n3g)
+		status_led="asus:blue:power"
+		;;
+	sl-r7205)
+		status_led="sl-r7205:green:status"
+		;;
+	v11st-fe)
+		status_led="v11st-fe:green:status"
+		;;
+	v22rw-2x2)
+		status_led="v22rw-2x2:green:security"
+		;;
+	w306r-v20)
+		status_led="w306r-v20:green:sys"
+		;;
+	w502u)
+		status_led="alfa:blue:wps"
+		;;
+	wcr-150gn)
+		status_led="wcr150gn:amber:power"
+		;;
+	whr-g300n)
+		status_led="whr-g300n:green:router"
+		;;
+	wli-tx4-ag300n)
+		status_led="buffalo:blue:power"
+		;;
+	wl-351)
+		status_led="wl-351:amber:power"
+		;;
+	wr512-3gn)
+		status_led="wr512:green:wps"
+		;;
+	ur-336un)
+		status_led="ur336:green:wps"
+		;;
+	xdxrn502j)
+		status_led="xdxrn502j:green:power"
+		;;
+	esac
+}
+
+set_state() {
+	get_status_led
+
+	case "$1" in
+	preinit)
+		insmod leds-gpio
+		status_led_set_timer 200 200
+		;;
+	failsafe)
+		status_led_set_timer 50 50
+		;;
+	done)
+		status_led_on
+		;;
+	esac
+}
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
new file mode 100644
index 000000000..bb7f66284
--- /dev/null
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -0,0 +1,111 @@
+#!/bin/sh
+
+rt2x00_eeprom_die() {
+	echo "rt2x00 eeprom: " "$*"
+	exit 1
+}
+
+rt2x00_eeprom_extract() {
+	local part=$1
+	local offset=$2
+	local count=$3
+	local mtd
+
+	. /etc/functions.sh
+
+	mtd=$(find_mtd_part $part)
+	[ -n "$mtd" ] || \
+		rt2x00_eeprom_die "no mtd device found for partition $part"
+
+	dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+		rt2x00_eeprom_die "failed to extract from $mtd"
+}
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/ramips.sh
+
+board=$(ramips_board_name)
+
+case "$FIRMWARE" in
+"RT288X.eeprom" | \
+"RT305X.eeprom" | \
+"RT3883.eeprom")
+	case $board in
+	dir-300-b1 | \
+	dir-600-b1 | \
+	dir-600-b2)
+		rt2x00_eeprom_extract "devdata" 16384 272
+		;;
+
+	dap-1350)
+		rt2x00_eeprom_extract "devdata" 0 272
+		;;
+
+	rt-n10-plus | \
+	rt-g32-b1)
+		rt2x00_eeprom_extract "devconf" 0 272
+		;;
+
+	f5d8235-v1 | \
+	f5d8235-v2)
+		rt2x00_eeprom_extract "u-boot" 262144 272
+		;;
+
+	3g-6200n | \
+	all0239-3g | \
+	all0256n | \
+	all5002 | \
+	argus-atp52b | \
+	bc2 | \
+	carambola | \
+	dir-615-h1 | \
+	dir-620-a1 | \
+	esr-9753 | \
+	fonera20n | \
+	freestation5 | \
+	hw550-3g | \
+	mofi3500-3gn | \
+	pwh2004 | \
+	nbg-419n | \
+	nw718 | \
+	omni-emb | \
+	psr-680w | \
+	rt-n15 | \
+	rt-n56u | \
+	sl-r7205 | \
+	v11st-fe | \
+	v22rw-2x2 | \
+	w306r-v20 | \
+	w502u | \
+	wcr-150gn | \
+	whr-g300n | \
+	wl-330n | \
+	wl-330n3g | \
+	wl-351 | \
+	wli-tx4-ag300n | \
+	wr512-3gn | \
+	wr6202 | \
+	ur-336un | \
+	xdxrn502j)
+		rt2x00_eeprom_extract "factory" 0 272
+		;;
+
+	wl341v3)
+		rt2x00_eeprom_extract "board-nvram" 64880 272
+		;;
+
+	*)
+		rt2x00_eeprom_die "board $board is not supported yet"
+		;;
+	esac
+	;;
+
+"rt2x00pci_1_0.eeprom")
+	case $board in
+	rt-n56u)
+		rt2x00_eeprom_extract "factory" 32768 272
+		;;
+	esac
+	;;
+esac
diff --git a/target/linux/ramips/base-files/etc/inittab b/target/linux/ramips/base-files/etc/inittab
new file mode 100644
index 000000000..67c36a6a9
--- /dev/null
+++ b/target/linux/ramips/base-files/etc/inittab
@@ -0,0 +1,4 @@
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+ttyS0::askfirst:/bin/ash --login
+ttyS1::askfirst:/bin/ash --login
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/leds b/target/linux/ramips/base-files/etc/uci-defaults/leds
new file mode 100755
index 000000000..2fddc011e
--- /dev/null
+++ b/target/linux/ramips/base-files/etc/uci-defaults/leds
@@ -0,0 +1,86 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+. /lib/ramips.sh
+
+set_usb_led() {
+	ucidef_set_led_usbdev "usb" "USB" "$1" "1-1"
+}
+
+set_wifi_led() {
+	ucidef_set_led_netdev "wifi_led" "wifi" "$1" "wlan0"
+}
+
+board=$(ramips_board_name)
+
+case $board in
+	3g-6200n)
+		set_wifi_led "edimax:amber:wlan"
+		set_usb_led "edimax:blue:3g"
+		;;
+	all0256n)
+		ucidef_set_rssimon "wlan0" "40000" "1"
+		ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
+		ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
+		ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
+	bc2)
+		set_usb_led "bc2:blue:usb"
+		;;
+	dir-300-b1|\
+	dir-600-b1|\
+	dir-600-b2|\
+	dir-620-a1)
+		# ANDed with vlan switch port 4 led state
+		ucidef_set_led_default "wan" "WAN LED (amber)" "d-link:amber:wan" "1"
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
+	dir-615-h1)
+		ucidef_set_led_default "status" "Status LED (amber)" "d-link:amber:status" "0"
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
+	esr-9753)
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
+	f5d8235-v1)
+		set_usb_led "f5d8235-v1:blue:storage"
+		;;
+	f5d8235-v2)
+		set_usb_led "f5d8235v2:blue:storage"
+		;;
+	fonera20n)
+		set_usb_led "fonera20n:orange:usb"
+		set_wifi_led "fonera20n:orange:wifi"
+		;;
+	all0239-3g|\
+	hw550-3g)
+		set_usb_led "hw550-3g:green:usb"
+		;;
+	mofi3500-3gn)
+		set_usb_led "mofi3500-3gn:green:usb"
+		;;
+	nw718)
+		set_usb_led "nw718:amber:usb"
+		;;
+	sl-r7205)
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
+	v11st-fe)
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
+	w306r-v20)
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
+	w502u)
+		set_usb_led "alfa:blue:usb"
+		set_wifi_led "rt2800pci-phy0::radio"
+		;;
+	wcr-150gn)
+		set_usb_led "wcr150gn:amber:user"
+		;;
+esac
+
+ucidef_commit_leds
+
+exit 0
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
new file mode 100755
index 000000000..bbb02e862
--- /dev/null
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -0,0 +1,217 @@
+#!/bin/sh
+
+. /etc/functions.sh
+. /lib/ramips.sh
+. /lib/functions/uci-defaults.sh
+
+if [ ! -x /usr/sbin/maccalc ]; then
+	echo "$0: maccalc not found!"
+	return
+fi
+
+ramips_setup_rt3x5x_vlans()
+{
+	if [ ! -x /sbin/swconfig ]; then
+		# legacy default
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		return
+	fi
+	local wanports=""
+	local lanports=""
+	swconfig dev rt305x set reset 1
+	for port in 5 4 3 2 1 0; do
+		if [ `swconfig dev rt305x port $port get disable` = "1" ]; then
+			continue
+		fi
+		if [ `swconfig dev rt305x port $port get lan` = "0" ]; then
+			wanports="$port $wanports"
+		else
+			lanports="$port $lanports"
+		fi
+	done
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "rt305x" "1" "1"
+	ucidef_add_switch_vlan "rt305x" "1" "$lanports 6t"
+	ucidef_add_switch_vlan "rt305x" "2" "$wanports 6t"
+}
+
+ramips_setup_interfaces()
+{
+	local board="$1"
+
+	ucidef_set_interface_loopback
+
+	case $board in
+	all0256n | \
+	all5002)
+		ucidef_set_interface_lan "eth0"
+		;;
+
+	dir-615-h1 | \
+	wl-330n)
+		ucidef_set_interface_lan "eth0.1"
+		;;
+
+	3g-6200n | \
+	argus-atp52b | \
+	b2c | \
+	nw718 | \
+	psr-680w | \
+	sl-r7205 | \
+	w502u | \
+	wr6202)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		;;
+
+	f5d8235-v1 | \
+	f5d8235-v2 | \
+	ur-336un)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		;;
+
+	v11st-fe)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
+		ucidef_add_switch_vlan "switch0" "2" "0 5t"
+		;;
+
+	rt-n15 | \
+	wl-351)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+		ucidef_add_switch_vlan "switch0" "2" "4 5t"
+		;;
+
+	rt-n56u)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
+		ucidef_add_switch_vlan "switch0" "2" "4 8t"
+		;;
+
+	freestation5 | \
+	wcr-150gn)
+		ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
+		;;
+
+	wli-tx4-ag300n)
+		ucidef_set_interface_lan "eth0"
+		;;
+
+	*)
+		RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
+		if [ -n "${RT3X5X}" ]; then
+			ramips_setup_rt3x5x_vlans
+		else
+			ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		fi
+		;;
+	esac
+}
+
+ramips_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+
+	case $board in
+	all0256n | \
+	all5002 | \
+	dir-615-h1)
+		lan_mac=$(ramips_get_mac_binary factory 40)
+		;;
+	3g-6200n | \
+	argus-atp52b | \
+	bc2 | \
+	f5d8235-v1 | \
+	nw718 | \
+	psr-680w | \
+	rt-n15 | \
+	sl-r7205 | \
+	wl-351)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+		;;
+
+	w306r-v20)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 5)
+		;;
+
+	fonera20n)
+		lan_mac=$(ramips_get_mac_binary factory 40)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+		;;
+
+	dir-300-b1 |\
+	dir-300-b2 |\
+	dir-600-b1)
+		lan_mac=$(ramips_get_mac_binary devdata 16388)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+		;;
+
+	dir-620-a1)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		lan_mac=$(maccalc or "$lan_mac" "02:00:00:00:00:00")
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+		;;
+
+	esr-9753 | \
+	ur-336un)
+		lan_mac=$(ramips_get_mac_binary devdata 16388)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+		;;
+
+	nbg-419n | \
+	wcr-150gn)
+                lan_mac=$(ramips_get_mac_binary factory 4)
+                wan_mac=$(ramips_get_mac_binary factory 40)
+		;;
+
+	f5d8235-v2)
+		lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+		;;
+
+	rt-n56u)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		wan_mac=$(ramips_get_mac_binary factory 32772)
+		;;
+
+	all0239-3g | \
+	carambola | \
+	w502u)
+		lan_mac=$(ramips_get_mac_binary factory 40)
+		wan_mac=$(ramips_get_mac_binary factory 46)
+		;;
+
+	wl341v3)
+		lan_mac=$(ramips_get_mac_binary board-nvram 65440)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+		;;
+
+	wli-tx4-ag300n)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		;;
+
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
+}
+
+[ -e /etc/config/network ] && exit 0
+
+touch /etc/config/network
+
+board=$(ramips_board_name)
+
+ramips_setup_interfaces $board
+ramips_setup_macs $board
+
+uci commit network
+
+exit 0
diff --git a/target/linux/ramips/base-files/lib/preinit/03_preinit_do_ramips.sh b/target/linux/ramips/base-files/lib/preinit/03_preinit_do_ramips.sh
new file mode 100644
index 000000000..e76418dad
--- /dev/null
+++ b/target/linux/ramips/base-files/lib/preinit/03_preinit_do_ramips.sh
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+do_ramips() {
+	. /lib/ramips.sh
+}
+
+boot_hook_add preinit_main do_ramips
diff --git a/target/linux/ramips/base-files/lib/preinit/05_ramips_load-input_drivers b/target/linux/ramips/base-files/lib/preinit/05_ramips_load-input_drivers
new file mode 100644
index 000000000..fbd4c83d8
--- /dev/null
+++ b/target/linux/ramips/base-files/lib/preinit/05_ramips_load-input_drivers
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+
+preinit_ramips_load_input_drivers() {
+	insmod input-core
+	insmod input-polldev
+	insmod gpio_keys_polled
+	insmod button-hotplug
+}
+
+boot_hook_add preinit_main preinit_ramips_load_input_drivers
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
new file mode 100644
index 000000000..591c549d1
--- /dev/null
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -0,0 +1,66 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+
+preinit_set_mac_address() {
+	local mac
+
+	. /lib/ramips.sh
+
+	case $(ramips_board_name) in
+	3g-6200n)
+		mac=$(ramips_get_mac_binary factory 4)
+		ifconfig eth0 hw ether $mac 2>/dev/null
+		;;
+	bc2 |\
+	dir-620-a1 |\
+	esr-9753 |\
+	freestation5 |\
+	nw718 |\
+	psr-680w |\
+	rt-n56u |\
+	sl-r7205)
+		mac=$(ramips_get_mac_binary factory 4)
+		mac=$(maccalc or "$mac" "02:00:00:00:00:00")
+		ifconfig eth0 hw ether $mac 2>/dev/null
+		;;
+	dir-300-b1 |\
+	dir-300-b2 |\
+	dir-600-b1)
+                mac=$(ramips_get_mac_binary devdata 16388)
+                ifconfig eth0 hw ether $mac 2>/dev/null
+                ;;
+	dap-1350)
+		mac=$(ramips_get_mac_binary devdata 46)
+		ifconfig eth0 hw ether $mac 2>/dev/null
+                ;;
+	all0239-3g |\
+	all0256n |\
+	all5002 |\
+	carambola |\
+	dir-615-h1 |\
+	fonera20n |\
+	hw550-3g |\
+	nbg-419n |\
+	omni-emb |\
+	w306r-v20 |\
+	w502u    |\
+	wl-330n |\
+	wl-330n3g |\
+	wr6202 |\
+	xdxrn502j)
+		mac=$(ramips_get_mac_binary factory 40)
+		ifconfig eth0 hw ether $mac 2>/dev/null
+		;;
+	wl341v3)
+		mac=$(ramips_get_mac_binary board-nvram 65440)
+		ifconfig eth0 hw ether $mac 2>/dev/null
+		;;
+	rt-n10-plus)
+		mac=$(ramips_get_mac_binary devconf 4)
+		ifconfig eth0 hw ether $mac 2>/dev/null
+		;;
+	esac
+}
+
+boot_hook_add preinit_main preinit_set_mac_address
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
new file mode 100755
index 000000000..90c28b7ab
--- /dev/null
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -0,0 +1,194 @@
+#!/bin/sh
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+ramips_get_mac_binary()
+{
+	local mtdname="$1"
+	local seek="$2"
+	local part
+
+	. /lib/functions.sh
+
+	part=$(find_mtd_part "$mtdname")
+	if [ -z "$part" ]; then
+		echo "ramips_get_mac_binary: partition $mtdname not found!" >&2
+		return
+	fi
+
+	dd bs=1 skip=$seek count=6 if=$part 2>/dev/null | /usr/sbin/maccalc bin2mac
+}
+
+ramips_get_mac_nvram()
+{
+	local mtdname="$1"
+	local key="$2"
+	local part
+	local mac_dirty
+
+	. /lib/functions.sh
+
+	part=$(find_mtd_part "$mtdname")
+	if [ -z "$part" ]; then
+		echo "ramips_get_mac_nvram: partition $mtdname not found!" >&2
+		return
+	fi
+
+	mac_dirty=$(strings "$part" | sed -n 's/'"$key"'=//p')
+	# "canonicalize" mac
+	/usr/sbin/maccalc add "$mac_dirty" 0
+}
+
+ramips_board_name() {
+	local machine
+	local name
+
+	machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
+
+	case "$machine" in
+	*"8devices Carambola")
+		name="carambola"
+		;;
+	*"Edimax 3g-6200n")
+		name="3g-6200n"
+		;;
+	*"Allnet ALL0239-3G")
+		name="all0239-3g"
+		;;
+	*"Allnet ALL0256N")
+		name="all0256n"
+		;;
+	*"Allnet ALL5002")
+		name="all5002"
+		;;
+	*"ARC FreeStation5")
+		name="freestation5"
+		;;
+	*"Argus ATP-52B")
+		name="argus-atp52b"
+		;;
+	*"Asus WL-330N")
+		name="wl-330n"
+		;;
+	*"Asus WL-330N3G")
+		name="wl-330n3g"
+		;;
+	*"Aztech HW550-3G")
+		name="hw550-3g"
+		;;
+	*"DIR-300 B1")
+		name="dir-300-b1"
+		;;
+	*"DIR-600 B1")
+		name="dir-600-b1"
+		;;
+	*"DIR-600 B2")
+		name="dir-600-b2"
+		;;
+	*"DIR-620 A1")
+		name="dir-620-a1"
+		;;
+	*"DIR-615 H1")
+		name="dir-615-h1"
+		;;
+        *"DAP-1350")
+                name="dap-1350"
+                ;;
+	*"ESR-9753")
+		name="esr-9753"
+		;;
+	*"F5D8235 v1")
+		name="f5d8235-v1"
+		;;
+	*"F5D8235 v2")
+		name="f5d8235-v2"
+		;;
+	*"La Fonera 2.0N")
+		name="fonera20n"
+		;;
+	*"MoFi Network MOFI3500-3GN")
+		name="mofi3500-3gn"
+		;;
+	*"NBG-419N")
+		name="nbg-419n"
+		;;
+	*"NexAira BC2")
+		name="bc2"
+		;;
+	*"NW718")
+		name="nw718"
+		;;
+	*"Omnima MiniEMBWiFi")
+		name="omni-emb"
+		;;
+	*"Petatel PSR-680W"*)
+		name="psr-680w"
+		;;
+	*"PWH2004")
+		name="pwh2004"
+		;;
+	*"RT-G32 B1")
+		name="rt-g32-b1"
+		;;
+	*"RT-N10+")
+		name="rt-n10-plus"
+		;;
+	*"RT-N15")
+		name="rt-n15"
+		;;
+	*"RT-N56U")
+		name="rt-n56u"
+		;;
+	*"Skyline SL-R7205"*)
+		name="sl-r7205"
+		;;
+	*"Sparklan WCR-150GN")
+		name="wcr-150gn"
+		;;
+	*"V22RW-2X2")
+		name="v22rw-2x2"
+		;;
+	*"W502U")
+		name="w502u"
+		;;
+	*"WHR-G300N")
+		name="whr-g300n"
+		;;
+	*"Sitecom WL-341 v3")
+		name="wl341v3"
+		;;
+	*"Sitecom WL-351 v1 002")
+		name="wl-351"
+		;;
+	*"Tenda W306R V2.0")
+		name="w306r-v20"
+		;;
+	*"Ralink V11ST-FE")
+		name="v11st-fe"
+		;;
+	*"WLI-TX4-AG300N")
+		name="wli-tx4-ag300n"
+		;;
+	*"WZR-AGL300NH")
+		name="wzr-agl300nh"
+		;;
+	*"WR512-3GN-like router")
+		name="wr512-3gn"
+		;;
+	*"UR-336UN Wireless N router")
+		name="ur-336un"
+		;;
+	*"AWB WR6202")
+		name="wr6202"
+		;;
+	*"XDX RN502J")
+		name="xdxrn502j"
+		;;
+	*)
+		name="generic"
+		;;
+	esac
+
+	echo $name
+}
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
new file mode 100755
index 000000000..5ebf42a85
--- /dev/null
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,84 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+
+. /lib/ramips.sh
+
+PART_NAME=firmware
+RAMFS_COPY_DATA=/lib/ramips.sh
+
+platform_check_image() {
+	local board=$(ramips_board_name)
+	local magic="$(get_magic_word "$1")"
+
+	[ "$ARGC" -gt 1 ] && return 1
+
+	case "$board" in
+	3g-6200n | \
+	all0239-3g | \
+	all0256n | \
+	all5002 | \
+	bc2 | \
+	carambola | \
+	dir-300-b1 | \
+	dir-600-b1 | \
+	dir-600-b2 | \
+	dir-615-h1 | \
+	dir-620-a1 | \
+	dap-1350 | \
+	esr-9753 | \
+	fonera20n | \
+	freestation5 | \
+	hw550-3g | \
+	mofi3500-3gn | \
+	nbg-419n | \
+	nw718 | \
+	omni-emb | \
+	psr-680w | \
+	rt-g32-b1 | \
+	rt-n10-plus | \
+	rt-n15 | \
+	rt-n56u | \
+	sl-r7205 | \
+	w306r-v20 |\
+	w502u |\
+	wr6202 |\
+	v22rw-2x2 | \
+	wl341v3 | \
+	wl-330n | \
+	wl-351 | \
+	wli-tx4-ag300n | \
+	whr-g300n |\
+	ur-336un |\
+	wr512-3gn)
+		[ "$magic" != "2705" ] && {
+			echo "Invalid image type."
+			return 1
+		}
+		return 0
+		;;
+	esac
+
+	echo "Sysupgrade is not yet supported on $board."
+	return 1
+}
+
+platform_do_upgrade() {
+	local board=$(ramips_board_name)
+
+	case "$board" in
+	*)
+		default_do_upgrade "$ARGV"
+		;;
+	esac
+}
+
+disable_watchdog() {
+	killall watchdog
+	( ps | grep -v 'grep' | grep '/dev/watchdog' ) && {
+		echo 'Could not disable watchdog'
+		return 1
+	}
+}
+
+append sysupgrade_pre_upgrade disable_watchdog
-- 
cgit v1.2.3