From 5c105d9f3fd086aff195d3849dcf847d6b0bd927 Mon Sep 17 00:00:00 2001 From: blogic Date: Fri, 5 Oct 2012 10:12:53 +0000 Subject: branch Attitude Adjustment git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c | 576 +++++++++++++++++++++ 1 file changed, 576 insertions(+) create mode 100644 target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c (limited to 'target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c') diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c new file mode 100644 index 000000000..39e0b720d --- /dev/null +++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c @@ -0,0 +1,576 @@ +/******************************************************************************* +Copyright (C) Marvell International Ltd. and its affiliates + +This software file (the "File") is owned and distributed by Marvell +International Ltd. and/or its affiliates ("Marvell") under the following +alternative licensing terms. Once you have made an election to distribute the +File under one of the following license alternatives, please (i) delete this +introductory statement regarding license alternatives, (ii) delete the two +license alternatives that you have not elected to use and (iii) preserve the +Marvell copyright notice above. + +******************************************************************************** +Marvell Commercial License Option + +If you received this File from Marvell and you have entered into a commercial +license agreement (a "Commercial License") with Marvell, the File is licensed +to you under the terms of the applicable Commercial License. + +******************************************************************************** +Marvell GPL License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File in accordance with the terms and conditions of the General +Public License Version 2, June 1991 (the "GPL License"), a copy of which is +available along with the File in the license.txt file or by writing to the Free +Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or +on the worldwide web at http://www.gnu.org/licenses/gpl.txt. + +THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED +WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY +DISCLAIMED. The GPL License provides additional details about this warranty +disclaimer. +******************************************************************************** +Marvell BSD License Option + +If you received this File from Marvell, you may opt to use, redistribute and/or +modify this File under the following licensing terms. +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of Marvell nor the names of its contributors may be + used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ + +#include "spi/mvSpi.h" +#include "spi/mvSpiSpec.h" + +#include "ctrlEnv/mvCtrlEnvLib.h" + +/* #define MV_DEBUG */ +#ifdef MV_DEBUG +#define DB(x) x +#define mvOsPrintf printf +#else +#define DB(x) +#endif + + +/******************************************************************************* +* mvSpi16bitDataTxRx - Transmt and receive data +* +* DESCRIPTION: +* Tx data and block waiting for data to be transmitted +* +********************************************************************************/ +static MV_STATUS mvSpi16bitDataTxRx (MV_U16 txData, MV_U16 * pRxData) +{ + MV_U32 i; + MV_BOOL ready = MV_FALSE; + + /* First clear the bit in the interrupt cause register */ + MV_REG_WRITE(MV_SPI_INT_CAUSE_REG, 0x0); + + /* Transmit data */ + MV_REG_WRITE(MV_SPI_DATA_OUT_REG, MV_16BIT_LE(txData)); + + /* wait with timeout for memory ready */ + for (i=0; i> 8) & 0xFF); + +#elif defined(MV_CPU_BE) + + /* perform the data write to the buffer in two stages with 8bit each */ + MV_U8 * bptr = (MV_U8 *)pRxData; + MV_U16 data = MV_16BIT_LE(MV_REG_READ(MV_SPI_DATA_IN_REG)); + *bptr = ((data >> 8) & 0xFF); + ++bptr; + *bptr = (data & 0xFF); + +#else + #error "CPU endianess isn't defined!\n" +#endif + + } + else + *pRxData = MV_16BIT_LE(MV_REG_READ(MV_SPI_DATA_IN_REG)); + } + + return MV_OK; +} + + +/******************************************************************************* +* mvSpi8bitDataTxRx - Transmt and receive data (8bits) +* +* DESCRIPTION: +* Tx data and block waiting for data to be transmitted +* +********************************************************************************/ +static MV_STATUS mvSpi8bitDataTxRx (MV_U8 txData, MV_U8 * pRxData) +{ + MV_U32 i; + MV_BOOL ready = MV_FALSE; + + /* First clear the bit in the interrupt cause register */ + MV_REG_WRITE(MV_SPI_INT_CAUSE_REG, 0x0); + + /* Transmit data */ + MV_REG_WRITE(MV_SPI_DATA_OUT_REG, txData); + + /* wait with timeout for memory ready */ + for (i=0; i serialBaudRate) + continue; + + /* check for exact fit */ + if ((cpuClk / preScale[i]) == serialBaudRate) + { + bestPrescaleIndx = i; + break; + } + + /* check if this is better than the previous one */ + if ((serialBaudRate - (cpuClk / preScale[i])) < minBaudOffset) + { + minBaudOffset = (serialBaudRate - (cpuClk / preScale[i])); + bestPrescaleIndx = i; + } + } + + if (bestPrescaleIndx > 14) + { + mvOsPrintf("%s ERROR: SPI baud rate prescale error!\n", __FUNCTION__); + return MV_OUT_OF_RANGE; + } + + /* configure the Prescale */ + tempReg = MV_REG_READ(MV_SPI_IF_CONFIG_REG); + tempReg = ((tempReg & ~MV_SPI_CLK_PRESCALE_MASK) | (bestPrescaleIndx + 0x12)); + MV_REG_WRITE(MV_SPI_IF_CONFIG_REG, tempReg); + + return MV_OK; +} + +/******************************************************************************* +* mvSpiCsAssert - Assert the Chip Select pin indicating a new transfer +* +* DESCRIPTION: +* Assert The chip select - used to select an external SPI device +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* Success or Error code. +* +********************************************************************************/ +MV_VOID mvSpiCsAssert(MV_VOID) +{ + /* For devices in which the SPI is muxed on the MPP with other interfaces*/ + mvMPPConfigToSPI(); + mvOsUDelay(1); + MV_REG_BIT_SET(MV_SPI_IF_CTRL_REG, MV_SPI_CS_ENABLE_MASK); +} + +/******************************************************************************* +* mvSpiCsDeassert - DeAssert the Chip Select pin indicating the end of a +* SPI transfer sequence +* +* DESCRIPTION: +* DeAssert the chip select pin +* +* INPUT: +* None. +* +* OUTPUT: +* None. +* +* RETURN: +* Success or Error code. +* +********************************************************************************/ +MV_VOID mvSpiCsDeassert(MV_VOID) +{ + MV_REG_BIT_RESET(MV_SPI_IF_CTRL_REG, MV_SPI_CS_ENABLE_MASK); + + /* For devices in which the SPI is muxed on the MPP with other interfaces*/ + mvMPPConfigToDefault(); +} + +/******************************************************************************* +* mvSpiRead - Read a buffer over the SPI interface +* +* DESCRIPTION: +* Receive (read) a buffer over the SPI interface in 16bit chunks. If the +* buffer size is odd, then the last chunk will be 8bits. Chip select is not +* handled at this level. +* +* INPUT: +* pRxBuff: Pointer to the buffer to hold the received data +* buffSize: length of the pRxBuff +* +* OUTPUT: +* pRxBuff: Pointer to the buffer with the received data +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSpiRead (MV_U8* pRxBuff, MV_U32 buffSize) +{ + MV_STATUS ret; + MV_U32 bytesLeft = buffSize; + MV_U16* rxPtr = (MV_U16*)pRxBuff; + + /* check for null parameters */ + if (pRxBuff == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Check that the buffer pointer and the buffer size are 16bit aligned */ + if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pRxBuff & 1) == 0)) + { + /* Verify that the SPI mode is in 16bit mode */ + MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); + + /* TX/RX as long we have complete 16bit chunks */ + while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE) + { + /* Transmitted and wait for the transfer to be completed */ + if ((ret = mvSpi16bitDataTxRx(MV_SPI_DUMMY_WRITE_16BITS, rxPtr)) != MV_OK) + return ret; + + /* increment the pointers */ + rxPtr++; + bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE; + } + + } + else + { + /* Verify that the SPI mode is in 8bit mode */ + MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); + + /* TX/RX in 8bit chanks */ + while (bytesLeft > 0) + { + /* Transmitted and wait for the transfer to be completed */ + if ((ret = mvSpi8bitDataTxRx(MV_SPI_DUMMY_WRITE_8BITS, pRxBuff)) != MV_OK) + return ret; + /* increment the pointers */ + pRxBuff++; + bytesLeft--; + } + } + + return MV_OK; +} + +/******************************************************************************* +* mvSpiWrite - Transmit a buffer over the SPI interface +* +* DESCRIPTION: +* Transmit a buffer over the SPI interface in 16bit chunks. If the +* buffer size is odd, then the last chunk will be 8bits. No chip select +* action is taken. +* +* INPUT: +* pTxBuff: Pointer to the buffer holding the TX data +* buffSize: length of the pTxBuff +* +* OUTPUT: +* None. +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSpiWrite(MV_U8* pTxBuff, MV_U32 buffSize) +{ + MV_STATUS ret; + MV_U32 bytesLeft = buffSize; + MV_U16* txPtr = (MV_U16*)pTxBuff; + + /* check for null parameters */ + if (pTxBuff == NULL) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Check that the buffer pointer and the buffer size are 16bit aligned */ + if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pTxBuff & 1) == 0)) + { + /* Verify that the SPI mode is in 16bit mode */ + MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); + + /* TX/RX as long we have complete 16bit chunks */ + while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE) + { + /* Transmitted and wait for the transfer to be completed */ + if ((ret = mvSpi16bitDataTxRx(*txPtr, NULL)) != MV_OK) + return ret; + + /* increment the pointers */ + txPtr++; + bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE; + } + } + else + { + + /* Verify that the SPI mode is in 8bit mode */ + MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); + + /* TX/RX in 8bit chanks */ + while (bytesLeft > 0) + { + /* Transmitted and wait for the transfer to be completed */ + if ((ret = mvSpi8bitDataTxRx(*pTxBuff, NULL)) != MV_OK) + return ret; + + /* increment the pointers */ + pTxBuff++; + bytesLeft--; + } + } + + return MV_OK; +} + + +/******************************************************************************* +* mvSpiReadWrite - Read and Write a buffer simultanuosely +* +* DESCRIPTION: +* Transmit and receive a buffer over the SPI in 16bit chunks. If the +* buffer size is odd, then the last chunk will be 8bits. The SPI chip +* select is not handled implicitely. +* +* INPUT: +* pRxBuff: Pointer to the buffer to write the RX info in +* pTxBuff: Pointer to the buffer holding the TX info +* buffSize: length of both the pTxBuff and pRxBuff +* +* OUTPUT: +* pRxBuff: Pointer of the buffer holding the RX data +* +* RETURN: +* Success or Error code. +* +* +*******************************************************************************/ +MV_STATUS mvSpiReadWrite(MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize) +{ + MV_STATUS ret; + MV_U32 bytesLeft = buffSize; + MV_U16* txPtr = (MV_U16*)pTxBuff; + MV_U16* rxPtr = (MV_U16*)pRxBuff; + + /* check for null parameters */ + if ((pRxBuff == NULL) || (pTxBuff == NULL)) + { + mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); + return MV_BAD_PARAM; + } + + /* Check that the buffer pointer and the buffer size are 16bit aligned */ + if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pTxBuff & 1) == 0) && (((MV_U32)pRxBuff & 1) == 0)) + { + /* Verify that the SPI mode is in 16bit mode */ + MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); + + /* TX/RX as long we have complete 16bit chunks */ + while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE) + { + /* Transmitted and wait for the transfer to be completed */ + if ((ret = mvSpi16bitDataTxRx(*txPtr, rxPtr)) != MV_OK) + return ret; + + /* increment the pointers */ + txPtr++; + rxPtr++; + bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE; + } + } + else + { + /* Verify that the SPI mode is in 8bit mode */ + MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); + + /* TX/RX in 8bit chanks */ + while (bytesLeft > 0) + { + /* Transmitted and wait for the transfer to be completed */ + if ( (ret = mvSpi8bitDataTxRx(*pTxBuff, pRxBuff) ) != MV_OK) + return ret; + pRxBuff++; + pTxBuff++; + bytesLeft--; + } + } + + return MV_OK; +} + + -- cgit v1.2.3