From 5c105d9f3fd086aff195d3849dcf847d6b0bd927 Mon Sep 17 00:00:00 2001
From: blogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Fri, 5 Oct 2012 10:12:53 +0000
Subject: branch Attitude Adjustment

git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../linux/etrax/patches-2.6.32/201-flashsize.patch | 88 ++++++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 target/linux/etrax/patches-2.6.32/201-flashsize.patch

(limited to 'target/linux/etrax/patches-2.6.32/201-flashsize.patch')

diff --git a/target/linux/etrax/patches-2.6.32/201-flashsize.patch b/target/linux/etrax/patches-2.6.32/201-flashsize.patch
new file mode 100644
index 000000000..42a467f74
--- /dev/null
+++ b/target/linux/etrax/patches-2.6.32/201-flashsize.patch
@@ -0,0 +1,88 @@
+--- a/arch/cris/arch-v10/drivers/axisflashmap.c
++++ b/arch/cris/arch-v10/drivers/axisflashmap.c
+@@ -113,7 +113,7 @@ static struct map_info map_cse1 = {
+ 
+ /* If no partition-table was found, we use this default-set. */
+ #define MAX_PARTITIONS         7
+-#define NUM_DEFAULT_PARTITIONS 3
++#define NUM_DEFAULT_PARTITIONS 2
+ 
+ /*
+  * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
+@@ -122,19 +122,14 @@ static struct map_info map_cse1 = {
+  */
+ static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
+ 	{
+-		.name = "boot firmware",
+-		.size = CONFIG_ETRAX_PTABLE_SECTOR,
+-		.offset = 0
+-	},
+-	{
+ 		.name = "kernel",
+-		.size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR),
+-		.offset = CONFIG_ETRAX_PTABLE_SECTOR
++		.size = 0x00,
++		.offset = 0
+ 	},
+ 	{
+-		.name = "filesystem",
+-		.size = 5 * CONFIG_ETRAX_PTABLE_SECTOR,
+-		.offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR)
++		.name = "rootfs",
++		.size = 0x200000,
++		.offset = 0x200000
+ 	}
+ };
+ 
+@@ -281,6 +276,11 @@ static int __init init_axis_flash(void)
+ 	struct partitiontable_entry *ptable;
+ 	int use_default_ptable = 1; /* Until proven otherwise. */
+ 	const char pmsg[] = "  /dev/flash%d at 0x%08x, size 0x%08x\n";
++	unsigned int kernel_part_size = 0;
++	unsigned char *flash_mem = (unsigned char*)(FLASH_CACHED_ADDR);
++	unsigned int flash_scan_count = 0;
++	const char *part_magic = "ACME_PART_MAGIC";
++	unsigned int magic_len = strlen(part_magic);
+ 
+ 	if (!(mymtd = flash_probe())) {
+ 		/* There's no reason to use this module if no flash chip can
+@@ -293,6 +293,31 @@ static int __init init_axis_flash(void)
+ 		axisflash_mtd = mymtd;
+ 	}
+ 
++	/* scan flash to findout where out partition starts */
++	
++	printk(KERN_INFO "Scanning flash for end of kernel magic\n");
++	for(flash_scan_count = 0; flash_scan_count < 100000; flash_scan_count++) {
++		if(strncmp(&flash_mem[flash_scan_count], part_magic, magic_len - 1) == 0) {
++			kernel_part_size = flash_mem[flash_scan_count + magic_len ];
++			kernel_part_size <<= 8;
++			kernel_part_size += flash_mem[flash_scan_count + magic_len + 2];
++			kernel_part_size <<= 8;
++			kernel_part_size += flash_mem[flash_scan_count + magic_len + 1];
++			kernel_part_size <<= 8;
++			kernel_part_size += flash_mem[flash_scan_count + magic_len + 3];
++			printk(KERN_INFO "Kernel ends at 0x%.08X\n", kernel_part_size);
++			flash_scan_count = 1100000;
++		}
++	}
++	
++	
++	if(kernel_part_size){
++		kernel_part_size = (kernel_part_size & 0xffff0000);
++		axis_default_partitions[0].size = kernel_part_size;
++		axis_default_partitions[1].size =  mymtd->size - axis_default_partitions[0].size;
++		axis_default_partitions[1].offset = axis_default_partitions[0].size;
++	}
++
+ 	if (mymtd) {
+ 		mymtd->owner = THIS_MODULE;
+ 		ptable_head = (struct partitiontable_head *)(FLASH_CACHED_ADDR +
+--- a/arch/cris/arch-v10/lib/hw_settings.S
++++ b/arch/cris/arch-v10/lib/hw_settings.S
+@@ -60,3 +60,5 @@
+ 	.dword R_PORT_PB_SET
+ 	.dword PB_SET_VALUE
+ 	.dword 0 ; No more register values
++	.ascii "ACME_PART_MAGIC" 
++	.dword 0xdeadc0de
-- 
cgit v1.2.3