From 5c105d9f3fd086aff195d3849dcf847d6b0bd927 Mon Sep 17 00:00:00 2001
From: blogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Fri, 5 Oct 2012 10:12:53 +0000
Subject: branch Attitude Adjustment

git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 target/linux/ar7/base-files/etc/config/network     | 42 ++++++++++++++++++++++
 target/linux/ar7/base-files/etc/diag.sh            | 34 ++++++++++++++++++
 target/linux/ar7/base-files/etc/init.d/adam2       | 13 +++++++
 .../linux/ar7/base-files/etc/uci-defaults/network  | 30 ++++++++++++++++
 4 files changed, 119 insertions(+)
 create mode 100644 target/linux/ar7/base-files/etc/config/network
 create mode 100644 target/linux/ar7/base-files/etc/diag.sh
 create mode 100755 target/linux/ar7/base-files/etc/init.d/adam2
 create mode 100644 target/linux/ar7/base-files/etc/uci-defaults/network

(limited to 'target/linux/ar7/base-files')

diff --git a/target/linux/ar7/base-files/etc/config/network b/target/linux/ar7/base-files/etc/config/network
new file mode 100644
index 000000000..9ba0e6d29
--- /dev/null
+++ b/target/linux/ar7/base-files/etc/config/network
@@ -0,0 +1,42 @@
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option type	bridge
+	option ifname	"eth0 eth1"
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+	option nat	1
+
+## Example for ATM bridging.
+## Useful for PPPoE or IP over ATM. Will create 'nas${unit}'
+#
+# config atm-bridge
+#	option unit 	0
+#	option encaps	llc
+#	option vpi  	8
+#	option vci  	35
+#	option payload	bridged # some ISPs need this set to 'routed'
+
+
+# config interface wan
+##	PPPoE:
+#	option ifname	nas0
+#	option proto	pppoe
+
+##	PPPoA:
+#	option ifname	atm0
+#	option proto	pppoa
+#	option encaps	llc
+#	option vpi  	8
+#	option vci  	35
+
+##	Both:
+#	option username "my_username"
+#	option password	"my_password"
diff --git a/target/linux/ar7/base-files/etc/diag.sh b/target/linux/ar7/base-files/etc/diag.sh
new file mode 100644
index 000000000..b8e4dc874
--- /dev/null
+++ b/target/linux/ar7/base-files/etc/diag.sh
@@ -0,0 +1,34 @@
+#!/bin/sh
+# Copyright (C) 2007 OpenWrt.org
+
+# This setup gives us 4.5 distinguishable states:
+#
+# Solid OFF:  Bootloader running, or kernel hung (timer task stalled)
+# Solid ON:   Kernel hung (timer task stalled)
+# 5Hz blink:  preinit
+# 10Hz blink: failsafe
+# Heartbeat:  normal operation
+
+set_state() {
+        case "$1" in
+                preinit)
+                        [ -d /sys/class/leds/status ] && {
+                                echo timer >/sys/class/leds/status/trigger
+                                echo 100 >/sys/class/leds/status/delay_on
+                                echo 100 >/sys/class/leds/status/delay_off
+                        }
+                ;;
+                failsafe)
+                        [ -d /sys/class/leds/status ] && {
+                                echo timer >/sys/class/leds/status/trigger
+                                echo 50 >/sys/class/leds/status/delay_on
+                                echo 50 >/sys/class/leds/status/delay_off
+                        }
+                ;;
+                done)
+                        [ -d /sys/class/leds/status ] && {
+                                echo heartbeat >/sys/class/leds/status/trigger
+                        }
+                ;;
+        esac
+}
diff --git a/target/linux/ar7/base-files/etc/init.d/adam2 b/target/linux/ar7/base-files/etc/init.d/adam2
new file mode 100755
index 000000000..6b786270e
--- /dev/null
+++ b/target/linux/ar7/base-files/etc/init.d/adam2
@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+# ADAM2 patcher for Netgear DG834 and compatible
+# Copyright (C) 2006 OpenWrt.org
+
+START=00
+start() {
+	MD5="$(md5sum /dev/mtdblock0  | awk '{print $1}')"
+	[ "$MD5" = "0530bfdf00ec155f4182afd70da028c1" ] && {
+		mtd unlock adam2
+		/sbin/adam2patcher /dev/mtdblock0
+	}
+	rm -f /etc/rc.d/S${START}adam2 /etc/init.d/adam2 /sbin/adam2patcher >&- 2>&-
+}
diff --git a/target/linux/ar7/base-files/etc/uci-defaults/network b/target/linux/ar7/base-files/etc/uci-defaults/network
new file mode 100644
index 000000000..2d35c56b1
--- /dev/null
+++ b/target/linux/ar7/base-files/etc/uci-defaults/network
@@ -0,0 +1,30 @@
+#!/bin/sh
+if [ -e "/sys/bus/mdio_bus/drivers/IC+ IP175A/1:00" -o \
+     -e "/sys/bus/mdio_bus/drivers/IC+ IP17xx/1:00" ] && \
+   [ -x /sbin/swconfig ];
+then
+	uci batch <<EOF
+set network.eth0=switch
+set network.eth0.name=eth0
+set network.eth0.reset=1
+set network.eth0.enable_vlan=1
+set network.eth0_1=switch_vlan
+set network.eth0_1.device=eth0
+set network.eth0_1.vlan=1
+set network.eth0_1.ports="0 1 2 3 4t"
+commit network
+EOF
+	HAS_SWITCH=1
+fi
+
+if [ -n "$HAS_SWITCH" -o \
+	-e "/sys/bus/mdio_bus/drivers/Infineon ADM6996/1:00" -o \
+	-e "/sys/bus/mdio_bus/drivers/Marvell 88E6060/1:10" ]; then
+	uci batch <<EOF
+set network.lan.ifname=eth0.1
+commit network
+EOF
+	HAS_SWITCH=1
+fi
+
+uci commit network
-- 
cgit v1.2.3