From 5c105d9f3fd086aff195d3849dcf847d6b0bd927 Mon Sep 17 00:00:00 2001 From: blogic Date: Fri, 5 Oct 2012 10:12:53 +0000 Subject: branch Attitude Adjustment git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/amazon/files/drivers/atm/amazon_tpe.c | 3074 ++++++++++++++++++++ 1 file changed, 3074 insertions(+) create mode 100644 target/linux/amazon/files/drivers/atm/amazon_tpe.c (limited to 'target/linux/amazon/files/drivers/atm/amazon_tpe.c') diff --git a/target/linux/amazon/files/drivers/atm/amazon_tpe.c b/target/linux/amazon/files/drivers/atm/amazon_tpe.c new file mode 100644 index 000000000..b50749440 --- /dev/null +++ b/target/linux/amazon/files/drivers/atm/amazon_tpe.c @@ -0,0 +1,3074 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ +//----------------------------------------------------------------------- +/* + * Description: + * Driver for Infineon Amazon TPE + */ +//----------------------------------------------------------------------- +/* Author: peng.liu@infineon.com + * Created: 12-April-2004 + */ +//----------------------------------------------------------------------- +/* History + * Last changed on: 13 Oct. 2004 + * Last changed by: peng.liu@infineon.com + * Last changed on: 28 Jan. 2004 + * Last changed by: peng.liu@infineon.com + * Last changed Reason: + * - AAL5R may send more bytes than expected in MFL (so far, confirmed as 64 bytes) + */ +// 507261:tc.chen 2005/07/26 re-organize code address map to improve performance. +// 507281:tc.chen 2005/07/28 fix f4 segment isssue +/* 511045:linmars 2005/11/04 from Liu.Peng: change NRT_VBR bandwidth calculation based on scr instead of pcr */ + +#ifndef __KERNEL__ +#define __KERNEL__ +#endif +#ifndef EXPORT_SYMTAB +#define EXPORT_SYMTAB +#endif + +/*TPE level loopback, bypass AWARE DFE */ +#undef TPE_LOOPBACK + +/* enable debug options */ +#undef AMAZON_ATM_DEBUG + +/* enable rx error packet analysis */ +#undef AMAZON_ATM_DEBUG_RX + +/* test AAL5 Interrupt */ +#undef AMAZON_TPE_TEST_AAL5_INT + +/* dump packet */ +#undef AMAZON_TPE_DUMP + +/* read ARC register*/ +/* this register is located in side DFE module*/ +#undef AMAZON_TPE_READ_ARC + +/* software controlled reassembly */ +#undef AMAZON_TPE_SCR + +/* recovery from AAL5 bug */ +#undef AMAZON_TPE_AAL5_RECOVERY + +#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY) +#define ALPHAEUS_BASE_ADDR 0x31c00 +#define A_CFG_ADDR (ALPHAEUS_BASE_ADDR+0x04) +#define AR_CB0_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x2c) +#define AR_CB1_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x30) +#define AT_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x90) +#define AR_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x1a0) +#define AR_CD_CNT0_ADDR (ALPHAEUS_BASE_ADDR+0x1c8) +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY) +#include +#include +#endif + +#define AMAZON_TPE_EMSG(fmt, args...) printk( KERN_ERR "%s: " fmt,__FUNCTION__, ## args) + +/***************************************** External Functions *******************************************/ +extern unsigned int amazon_get_fpi_hz(void); +extern void mask_and_ack_amazon_irq(unsigned int irq_nr); +extern void amz_push_oam(unsigned char *); + +//amazon_mei.c +#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY) +extern MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize); +extern MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize); +#endif + +/***************************************** Internal Functions *******************************************/ +int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data); +/***************************************** Global Data *******************************************/ +amazon_atm_dev_t g_atm_dev; //device data +static struct tq_struct swex_start_task; //BH task +static struct tq_struct swex_complete_task; //BH task +#ifdef AMAZON_TPE_SCR +static struct tq_struct a5r_task; //BH task +#endif +static struct dma_device_info g_dma_dev; //for DMA +static struct atm_dev * amazon_atm_devs[AMAZON_ATM_PORT_NUM]; +static struct oam_last_activity g_oam_time_stamp[AMAZON_ATM_MAX_VCC_NUM]; +static u8 g_oam_cell[AMAZON_AAL0_SDU+4]; //for OAM cells +#ifdef AMAZON_CHECK_LINK +static int adsl_link_status; //ADSL link status, 0:down, 1:up +#endif //AMAZON_CHECK_LINK +/***************************************** Module Parameters *************************************/ +// Parameter Definition for module +static int port_enable0 = 1; // Variable for parameter port_enable0 +static int port_enable1 = 0; // Variable for parameter port_enable1 +static int port_max_conn0 = 15; // Variable for parameter port_max_conn0 +static int port_max_conn1 = 0; // Variable for parameter port_max_conn1 +static int port_cell_rate_up0 = 7500; // Variable for parameter port_cell_rate_up0 +static int port_cell_rate_up1 = 7500; // Variable for parameter port_cell_rate_up1 + + +static int qsb_tau = 1; // Variable for parameter qsb_tau +static int qsb_srvm = 0xf; // Variable for parameter qsb_srvm +static int qsb_tstep = 4 ; // Variable for parameter qsb_tstep + +static int cbm_nrt = 3900; // Variable for parameter cbm_nrt +static int cbm_clp0 =3500; // Variable for parameter cbm_clp0 +static int cbm_clp1 =3200; // Variable for parameter cbm_clp1 +static int cbm_free_cell_no = AMAZON_ATM_FREE_CELLS; // Variable for parameter cbm_free_cell_no + +static int a5_fill_pattern = 0x7e; // Variable for parameter a5_fill_pattern '~' +static int a5s_mtu = 0x700; // mtu for tx +static int a5r_mtu = 0x700; // mtu for rx + +static int oam_q_threshold = 64; // oam queue threshold, minium value 64 +static int rx_q_threshold = 1000; // rx queue threshold, minium value 64 +static int tx_q_threshold = 800; // tx queue threshold, minium value 64 + +MODULE_PARM(port_max_conn0, "i"); +MODULE_PARM_DESC(port_max_conn0, "Maximum atm connection for port #0"); +MODULE_PARM(port_max_conn1, "i"); +MODULE_PARM_DESC(port_max_conn1, "Maximum atm connection for port #1"); +MODULE_PARM(port_enable0, "i"); +MODULE_PARM_DESC(port_enable0, "0 -> port disabled, 1->port enabled"); +MODULE_PARM(port_enable1, "i"); +MODULE_PARM_DESC(port_enable1, "0 -> port disabled, 1->port enabled"); +MODULE_PARM(port_cell_rate_up0, "i"); +MODULE_PARM_DESC(port_cell_rate_up0, "ATM port upstream rate in cells/s"); +MODULE_PARM(port_cell_rate_up1, "i"); +MODULE_PARM_DESC(port_cell_rate_up1, "ATM port upstream rate in cells/s"); + +MODULE_PARM(qsb_tau,"i"); +MODULE_PARM_DESC(qsb_tau, "Cell delay variation. value must be > 0"); +MODULE_PARM(qsb_srvm, "i"); +MODULE_PARM_DESC(qsb_srvm, "Maximum burst size"); +MODULE_PARM(qsb_tstep, "i"); +MODULE_PARM_DESC(qsb_tstep, "n*32 cycles per sbs cycles n=1,2,4"); + +MODULE_PARM(cbm_nrt, "i"); +MODULE_PARM_DESC(cbm_nrt, "Non real time threshold for cell buffer"); +MODULE_PARM(cbm_clp0, "i"); +MODULE_PARM_DESC(cbm_clp0, "Threshold for cells with cell loss priority 0"); +MODULE_PARM(cbm_clp1, "i"); +MODULE_PARM_DESC(cbm_clp1, "Threshold for cells with cell loss priority 1"); +MODULE_PARM(cbm_free_cell_no, "i"); +MODULE_PARM_DESC(cbm_free_cell_no, "Number of cells in the cell buffer manager"); + +MODULE_PARM(a5_fill_pattern, "i"); +MODULE_PARM_DESC(a5_fill_pattern, "filling pattern (PAD) for aal5 frames"); +MODULE_PARM(a5s_mtu, "i"); +MODULE_PARM_DESC(a5s_mtu, "max. SDU for upstream"); +MODULE_PARM(a5r_mtu, "i"); +MODULE_PARM_DESC(a5r_mtu, "max. SDU for downstream"); + +MODULE_PARM(oam_q_threshold, "i"); +MODULE_PARM_DESC(oam_q_threshold, "oam queue threshold"); + +MODULE_PARM(rx_q_threshold, "i"); +MODULE_PARM_DESC(rx_q_threshold, "downstream/rx queue threshold"); + +MODULE_PARM(tx_q_threshold, "i"); +MODULE_PARM_DESC(tx_q_threshold, "upstream/tx queue threshold"); + +/***************************************** local functions *************************************/ +/* Brief: valid QID + * Return: 1 if valid + * 0 if not + */ +static inline int valid_qid(int qid) +{ + return ( (qid>0) && (qiddata)) & 15) != 0){ + AMAZON_TPE_DMSG("need to adjust the alignment manually\n"); + skb_reserve(skb, 16 - (((u32) (skb->data)) & 15) ); + } + +} + +/* + * Brief: initialize the device according to the module paramters + * Return: not NULL - ok + * NULL - fails + * Description: arrange load parameters and call the hardware initialization routines + */ +static void atm_init_parameters(amazon_atm_dev_t *dev) +{ + //port setting + dev->ports[0].enable = port_enable0; + dev->ports[0].max_conn = port_max_conn0; + dev->ports[0].tx_max_cr = port_cell_rate_up0; + if (port_enable1){ + dev->ports[1].enable = port_enable1; + dev->ports[1].max_conn = port_max_conn1; + dev->ports[1].tx_max_cr = port_cell_rate_up1; + } + + //aal5 + dev->aal5.padding_byte = a5_fill_pattern; + dev->aal5.tx_max_sdu = a5s_mtu; + dev->aal5.rx_max_sdu = a5r_mtu; + + //cbm + dev->cbm.nrt_thr = cbm_nrt; + dev->cbm.clp0_thr = cbm_clp0; + dev->cbm.clp1_thr = cbm_clp1; + dev->cbm.free_cell_cnt = cbm_free_cell_no; + + //qsb + dev->qsb.tau = qsb_tau; + dev->qsb.tstepc =qsb_tstep; + dev->qsb.sbl = qsb_srvm; + + //allocate on the fly + dev->cbm.mem_addr = NULL; + dev->cbm.qd_addr = NULL; +} + + +/* Brief: Find QID for VCC + * Parameters: vcc - VCC data structure + * Return Value: -EINVAL - VCC not found + * qid - QID for this VCC + * Description: + * This function returns the QID of a given VCC + */ +static int amazon_atm_get_queue(struct atm_vcc* vcc) +{ + int i; + for (i=0;ivpi == vpi) && (vcc->vci == vci)) return i; + } + } + return -EINVAL; +} + +/* Brief: Find QID for VPI + * Parameters: vpi - VPI to found + * Return Value: -EINVAL - VPI not found + * qid - QID for this VPI + * + * Description: + * This function returns the QID for a given VPI. itf and VCI don't matter + */ +static int amazon_atm_find_vpi(u8 vpi) +{ + int i; + for (i=0;ivpi == vpi) return i; + } + } + return -EINVAL; +} + +/* + * Brief: Clears QID entries for VCC + * + * Parameters: vcc - VCC to found + * + * Description: + * This function searches for the given VCC and sets it to NULL if found. + */ +static inline void amazon_atm_clear_vcc(int i) +{ + g_atm_dev.queues[i].vcc = NULL; + g_atm_dev.queues[i].free = 1; +} + + +/* + * Brief: dump skb data + */ +static inline void dump_skb(u32 len, char * data) +{ +#ifdef AMAZON_TPE_DUMP + int i; + for(i=0;ipop != NULL) { + vcc->pop(vcc, skb); + } else { + dev_kfree_skb_any(skb); + } +} +/* + * Brief: release TX skbuff + */ +static inline void amazon_atm_free_tx_skb(struct sk_buff *skb) +{ + struct atm_vcc* vcc = ATM_SKB(skb)->vcc; + if (vcc!=NULL){ + amazon_atm_free_tx_skb_vcc(vcc,skb); + } else { + dev_kfree_skb_any(skb);//fchang:Added + } +} + +/* Brief: divide by 64 and round up + */ +static inline u32 divide_by_64_round_up(int input) +{ + u32 tmp1; + tmp1 = (u32) input; + tmp1 = (tmp1%64)?(tmp1/64 + 1): (tmp1/64); + if (tmp1 == 0) tmp1 = 1; + return tmp1; +} + +/* + * Brief: statistics + */ +#ifdef AMAZON_ATM_DEBUG +static inline void queue_statics(int qid, qs_t idx) +{ + if (valid_qid(qid)){ + g_atm_dev.queues[qid].qs[idx]++; + } +} +#else //not AMAZON_ATM_DEBUG +static inline void queue_statics(int qid, qs_t idx){} +#endif //AMAZON_ATM_DEBUG + + +/* Brief: set dma tx full, i.e. there is no available descriptors + */ +static void inline atm_dma_full(void) +{ + AMAZON_TPE_DMSG("ch0 is full\n"); + atomic_set(&g_atm_dev.dma_tx_free_0,0); +} + +/* + * Brief set dma tx free (at least one descript is available) + */ +inline static void atm_dma_free(void) +{ + AMAZON_TPE_DMSG("ch0 is free\n"); + atomic_set(&g_atm_dev.dma_tx_free_0,1); +} + + +/* Brief: return the status of DMA TX descriptors + * Parameters: TX channel (DMA_TX_CH0, TX_CH1) + * Return: + * 1: there are availabel TX descriptors + * 0: no available + * Description: + * + */ +inline int dma_may_send(int ch) +{ + if (atomic_read(&g_atm_dev.dma_tx_free_0)){ + return 1; + } + return 0; +} + +/******************************* global functions *********************************/ +/* + * Brief: SWIE Cell Extraction Start Routine + * and task routine for swex_complete_task + * Parameters: irq_stat - interrupt status + * + * Description: + * This is the routine for extracting cell. It will schedule itself if the hardware is busy. + * This routine runs in interrupt context + */ +void amazon_atm_swex(void * irq_stat) +{ + u32 ex_stat=0; + u32 addr; + // Read extraction status register + ex_stat = readl(CBM_HWEXSTAT0_ADDR); + + // Check if extraction/insertion is in progress + if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) || (test_and_set_bit(SWIE_LOCK, &(g_atm_dev.swie.lock))!=0)) { + AMAZON_TPE_DMSG(" extraction in progress. Will wait\n"); + swex_start_task.data = irq_stat; + queue_task(&swex_start_task, &tq_immediate); + mark_bh(IMMEDIATE_BH); + }else { + // Extract QID + g_atm_dev.swie.qid = (((u32)irq_stat) >> 24); + AMAZON_TPE_DMSG("extracting from qid=%u\n",g_atm_dev.swie.qid); + //read status word + addr = KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); + addr = readl((addr + g_atm_dev.swie.qid * 0x10 + 4) & 0xFFFFFFC0); + addr = KSEG1ADDR(addr); + g_atm_dev.swie.sw = readl(addr+52)&SWIE_ADDITION_DATA_MASK; + AMAZON_TPE_DMSG("cell addition word: %8x \n", g_atm_dev.swie.sw); + + // Start extraction + AMAZON_WRITE_REGISTER_L(g_atm_dev.swie.qid | SWIE_CBM_PID_SUBADDR, CBM_HWEXPAR0_ADDR); + AMAZON_WRITE_REGISTER_L(SWIE_CBM_SCE0, CBM_HWEXCMD_ADDR); + } +} +#ifdef AMAZON_TPE_SCR +u32 g_a5r_wait=0; +/* + * Brief: AAL5 Packet Extraction Routine and task routine for a5r_task + * Parameters: irq_stat - interrupt status + * + * Description: + * This is the routine for extracting frame. It will schedule itself if the hardware is busy. + * This routine runs in interrupt context + */ +void amazon_atm_a5r(void* qid) +{ + volatile u32 ex_stat=0; + u32 addr; + u32 a5r_wait=0; + + ex_stat = readl(CBM_HWEXSTAT0_ADDR); +#if 0 + // Check if extraction/insertion is in progress + if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) { + AMAZON_TPE_DMSG(" extraction in progress. Will wait\n"); + a5r_task.data = qid; + queue_task(&a5r_task, &tq_immediate); + mark_bh(IMMEDIATE_BH); + }else { + AMAZON_TPE_DMSG("extracting from qid=%u\n",(u8)qid); + // Start extraction + AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR); + AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR); + } +#else + //while ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) { + while ( ex_stat != 0x80){ + a5r_wait++; + ex_stat = readl(CBM_HWEXSTAT0_ADDR); +#if 0 + if (a5r_wait >= 0xffffff){ + a5r_wait=0; + printk("."); + } +#endif + } + if (a5r_wait > g_a5r_wait){ + g_a5r_wait = a5r_wait; + } + AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR); + AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR); +#endif +} + +#endif //AMAZON_TPE_SCR + +/* Brief: Handle F4/F5 OAM cell + * Return: + * 0 ok + * <0 fails + */ +static int inline amazon_handle_oam_cell(void *data, u8 vpi, u16 vci,u32 status) +{ + struct atm_vcc* vcc=NULL; + int qid; + if (!status&SWIE_EOAM_MASK){ + AMAZON_TPE_EMSG("unknown cell received, discarded\n"); + goto amazon_handle_oam_cell_err_exit; + }else if (status&SWIE_ECRC10ERROR_MASK){ + AMAZON_TPE_EMSG("CRC-10 Error Status:%8x, discarded\n", status); + goto amazon_handle_oam_cell_err_exit; + }else{ + if(status & (SWIE_EVCI3_MASK |SWIE_EVCI4_MASK)){ + //F4 level (VPI) OAM, Assume duplex + qid = amazon_atm_find_vpi(vpi)+CBM_RX_OFFSET; + }else if (status & (SWIE_EPTI4_MASK|SWIE_EPTI5_MASK)){ + //F5 level (VCI) OAM, Assume duplex + qid = amazon_atm_find_vpivci(vpi,vci)+CBM_RX_OFFSET; + }else{ + qid = -1; + AMAZON_TPE_EMSG("non-F4/F5 OAM cells?, discarded\n"); + goto amazon_handle_oam_cell_err_exit; + } + } + if (valid_qid(qid) && ((vcc = g_atm_dev.queues[qid].vcc)!=NULL)){ + //TODO, should we do this for ALL OAM types? (Actually only User and CC) + g_atm_dev.queues[qid].access_time=xtime; + if (vcc->push_oam){ + (*vcc->push_oam)(vcc,data); + }else{ + amz_push_oam(data); + } + }else{ + AMAZON_TPE_EMSG("no VCC yet\n"); + goto amazon_handle_oam_cell_err_exit; + } + return 0; +amazon_handle_oam_cell_err_exit: + dump_skb(AMAZON_AAL0_SDU,(char *)data); + return -1; +} + +/* Brief: SWIE Cell Extraction Finish Routine + * and task routine for swex_complete_task + * Description: + * 1.Allocate a buffer of type struct sk_buff + * 2.Copy the data from the temporary memory to this buffer + * 3.Push the data to upper layer + * 4.Update the statistical data if necessary + * 5.Release the temporary data + + */ +void amazon_atm_swex_push(void * data) +{ + struct atm_vcc* vcc=NULL; + struct sk_buff* skb=NULL; + struct amazon_atm_cell_header * cell_header; + u32 status; + int qid; + if (!data){ + AMAZON_TPE_EMSG("data is NULL\n"); + return; + } + qid = ((u8*)data)[AMAZON_AAL0_SDU]; + status = ((u32*)data)[ATM_AAL0_SDU/4]; + cell_header = (struct amazon_atm_cell_header *) data; + if (valid_qid(qid) != 1){ + AMAZON_TPE_EMSG("error qid: %u\n",qid); + AMAZON_TPE_EMSG("unknown cells recieved\n"); + }else if (qid == AMAZON_ATM_OAM_Q_ID){ + //OAM or RM or OTHER cell + //Find real connection + +#ifdef IKOS_MINI_BOOT + //for OAM loop back test + dump_skb(56,(char *)data); + //kfree(data); using g_oam_cell + return; +#endif //IKOS_MINI_BOOT +#ifdef TPE_LOOPBACK + amz_push_oam(data); + return; +#endif//TPE_LOOPBACK + int ret = 0; + ret = amazon_handle_oam_cell(data,cell_header->bit.vpi,cell_header->bit.vci,status); + if (ret == 0) + return; + }else{ + //should be normal AAL0 cells + // Get VCC + vcc = g_atm_dev.queues[qid].vcc; + if (vcc != NULL) { + AMAZON_TPE_DMSG("push to upper layer\n"); + skb = dev_alloc_skb(AMAZON_AAL0_SDU); + if (skb != NULL) { + //skb->dev=vcc->dev; + memcpy(skb_put(skb, AMAZON_AAL0_SDU), data, AMAZON_AAL0_SDU); + skb->stamp = xtime; + ATM_SKB(skb)->vcc = vcc; + (*g_atm_dev.queues[qid].push)(vcc,skb,0); + }else{ + AMAZON_TPE_EMSG(" No memory left for incoming AAL0 cell! Cell discarded!\n"); + //inform the upper layer + (*g_atm_dev.queues[qid].push)(vcc,skb,-ENOMEM); + atomic_inc(&vcc->stats->rx_drop); + } + }else{ + AMAZON_TPE_EMSG("invalid qid %u\n",qid); + } + } + //kfree(data); using g_oam_cell +} + +/* + * Brief: Interrupt handler for software cell extraction (done) + * Parameters: irq - CPPN for this interrupt + * data - Device ID for this interrupt + * regs - Register file + * + * Description: + * When a software extraction is finished this interrupt is issued. + * It reads the cell data and sends it to the ATM stack. + */ +void amazon_atm_swex_isr(int irq, void *data, struct pt_regs *regs) +{ + u32 * cell = NULL; + int i; + //ATM_AAL0 SDU + QID + AMAZON_TPE_DMSG("SWIE extraction done\n"); + cell = (u32 *) g_oam_cell; + if (cell != NULL){ + //convert to host byte order from big endian + for(i=0;i>CBM_INTINF0_QID_SHIFT); +#ifdef AMAZON_TPE_SCR + if (irq_stat & CBM_INTINF0_EF){ + amazon_atm_a5r((void*)qid); + } +#endif + // Check if Any Cell Arrived + if (irq_stat & CBM_INTINF0_ACA) { + amazon_atm_swex((void *)irq_stat); + } + //TX AAL5 PDU discard + if (irq_stat & CBM_INTINF0_OPF){ + if ( (qid) < CBM_RX_OFFSET ){ + g_atm_dev.mib_counter.tx_drop++; + } + queue_statics(qid, QS_HW_DROP); + } + if (irq_stat & (CBM_INTINF0_ERR|CBM_INTINF0_Q0E|CBM_INTINF0_Q0I|CBM_INTINF0_RDE)){ + AMAZON_TPE_EMSG("CBM INT status: %8x\n",irq_stat); + if (irq_stat & CBM_INTINF0_ERR){ + AMAZON_TPE_EMSG("CBM Error: FPI Bus Error\n"); + } + if (irq_stat & CBM_INTINF0_Q0E){ + AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n"); + } + if (irq_stat & CBM_INTINF0_Q0I){ + AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n"); + } + if (irq_stat & CBM_INTINF0_RDE){ + AMAZON_TPE_EMSG("CBM Error: Read Empty Queue %u\n",qid); + dump_qd(qid); + } + } + } + mask_and_ack_amazon_irq(AMAZON_CBM_INT); +} + +/* Brief: check the status word after AAL SDU after reassembly + */ +static inline void check_aal5_error(u8 stw0, u8 stw1, int qid) +{ + if (stw0 & AAL5_STW0_MFL){ + AMAZON_TPE_DMSG("Maximum Frame Length\n"); + g_atm_dev.queues[qid].aal5VccOverSizedSDUs++; + } + if (stw0 & AAL5_STW0_CRC){ + AMAZON_TPE_DMSG("CRC\n"); + g_atm_dev.queues[qid].aal5VccCrcErrors++; + } +#ifdef AMAZON_ATM_DEBUG_RX + AMAZON_TPE_EMSG("qid:%u stw0:%8x stw1:%8x\n",qid,stw0,stw1); +#endif +} + +/* Brief: Process DMA rx data + * Parameters: + dma_dev: pointer to the dma_device_info, provided by us when register the dma device + * Return: no + * Description: DMA interrupt handerl with OoS support. It is called when there is some data in rx direction. + * + */ +//507261:tc.chen void atm_process_dma_rx(struct dma_device_info* dma_dev) +void __system atm_process_dma_rx(struct dma_device_info* dma_dev) +{ + u8 * head=NULL; + u32 length=0; + u8 stw0=0; + u8 stw1=0; + + struct sk_buff * skb=NULL; + struct atm_vcc * vcc=NULL; + int qid=0; +#ifdef AMAZON_ATM_DEBUG_RX + static int dma_rx_dump=0; + static u32 seq=0; + + seq++; + if (dma_rx_dump>0){ + printk("\n=========================[%u]=========================\n",seq); + } +#endif + length=dma_device_read(dma_dev,&head,(void**)&skb); + AMAZON_TPE_DMSG("receive %8p[%u] from DMA\n", head,length); + if (head == NULL||length<=0) { + AMAZON_TPE_DMSG("dma_read null \n"); + goto error_exit; + } + + if (length > (g_atm_dev.aal5.rx_max_sdu+64)){ + AMAZON_TPE_EMSG("received packet too large (%u)\n",length); + goto error_exit; + } + //check AAL5R trail for error and qid + //last byte is qid + length--; + qid = (int) head[length]; + AMAZON_TPE_DMSG("head[%u] qid %u\n",length, qid); + //STW0 is always 4 bytes before qid + length -= 4; + stw0 = head[length]&0xff; + AMAZON_TPE_DMSG("head[%u] stw0 %8x\n",length, stw0); + //position of STW1 depends on the BE bits + length = length-4 + (stw0&AAL5_STW0_BE); + stw1 = head[length]&0xff; + AMAZON_TPE_DMSG("head[%u] stw1 %8x\n",length, stw1); + if ( (stw0 & AAL5_STW0_MASK) || (stw1 & AAL5_STW1_MASK) ){ + //AAL5 Error + check_aal5_error(stw0, stw1,qid); + goto error_exit; + } + //make data pointers consistent + //UU + CPI + length -= 2; + AMAZON_TPE_DMSG("packet length %u\n", length); + + //error: cannot restore the qid + if (valid_qid(qid) != 1){ + AMAZON_TPE_EMSG("received frame in invalid qid %u!\n", qid); + goto error_exit; + } + vcc = g_atm_dev.queues[qid].vcc; + if (vcc == NULL){ + AMAZON_TPE_EMSG("received frame in invalid vcc, qid=%u!\n",qid); + goto error_exit; + } + if (skb == NULL){ + AMAZON_TPE_EMSG("cannot restore skb pointer!\n"); + goto error_exit; + } + skb_put(skb,length); + skb->stamp = xtime; + g_atm_dev.queues[qid].access_time=xtime; + if ((*g_atm_dev.queues[qid].push)(vcc,skb,0)){ + g_atm_dev.mib_counter.rx_drop++; + queue_statics(qid, QS_SW_DROP); + }else{ + g_atm_dev.mib_counter.rx++; + adsl_led_flash();//joelin adsl led + queue_statics(qid, QS_PKT); + AMAZON_TPE_DMSG("push successful!\n"); + } +#ifdef AMAZON_ATM_DEBUG_RX + if (dma_rx_dump>0){ + printk("\nOK packet [dump=%u] length=%u\n",dma_rx_dump,length); + dump_skb(length+7, head); + } + if (dma_rx_dump >0) dma_rx_dump--; +#endif + return ; +error_exit: +#ifdef AMAZON_ATM_DEBUG_RX + if ( (head!=NULL) && (length >0)){ + AMAZON_TPE_EMSG("length=%u\n",length); + dump_skb(length+5, head); + } + dma_rx_dump++; +#endif + g_atm_dev.mib_counter.rx_err++; + queue_statics(qid, QS_ERR); + /* + if (vcc){ + (*g_atm_dev.queues[qid].push)(vcc,skb,1); + } + */ + if (skb != NULL) { + dev_kfree_skb_any(skb); + } + return; +} + +/*Brief: ISR for DMA pseudo interrupt + *Parameter: + dma_dev: pointer to the dma_device_info, provided by us when register the dma device + intr_status: + RCV_INT: rx data available + TX_BUF_FULL_INT: tx descriptor run out of + TRANSMIT_CPT_INT: tx descriptor available again + *Return: + 0 for success??? + */ +//507261:tc.chen int amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status) +int __system amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status) +{ + AMAZON_TPE_DMSG("status:%u\n",intr_status); + switch (intr_status) { + case RCV_INT: + atm_process_dma_rx(dma_dev); + break; + case TX_BUF_FULL_INT: + //TX full: no descriptors + atm_dma_full(); + break; + case TRANSMIT_CPT_INT: + //TX free: at least one descriptor + atm_dma_free(); + break; + default: + AMAZON_TPE_EMSG("unknown status!\n"); + } + return 0; +} + +/*Brief: free buffer for DMA tx + *Parameter: + dataptr: pointers to data buffer + opt: optional parameter, used to convey struct skb pointer, passwd in dma_device_write + *Return: + 0 for success??? + *Description: + called by DMA module to release data buffer after DMA tx transaction + *Error: + cannot restore skb pointer + */ +int amazon_atm_free_tx(u8*dataptr, void* opt) +{ + struct sk_buff *skb; + if (opt){ + AMAZON_TPE_DMSG("free skb%8p\n",opt); + skb = (struct sk_buff *)opt; + amazon_atm_free_tx_skb(skb); + }else{ + AMAZON_TPE_EMSG("BUG: cannot restore skb pointer!\n"); + } + return 0; +} + +/*Brief: allocate buffer & do alignment + */ +inline struct sk_buff * amazon_atm_alloc_buffer(int len) +{ + struct sk_buff *skb; + skb = dev_alloc_skb(len+16); + if (skb){ + //alignment requriements (4x32 bits (16 bytes) boundary) + alloc_align_16(skb); + } + return skb; +} + +/*Brief: allocate buffer for DMA rx + *Parameter: + len: length + opt: optional data to convey the skb pointer, which will be returned to me in interrupt handler, + *Return: + pointer to buffer, NULL means error? + *Description: + must make sure byte alignment + */ + +u8* amazon_atm_alloc_rx(int len, int* offset, void **opt) +{ + struct sk_buff *skb; + *offset = 0; + skb = amazon_atm_alloc_buffer(len); + if (skb){ + AMAZON_TPE_DMSG("alloc skb->data:%8p len:%u\n",skb->data,len); + *(struct sk_buff**)opt = skb; + }else{ + AMAZON_TPE_DMSG("no memory for receiving atm frame!\n"); + return NULL; + } + return skb->data; +} + + + + +/* Brief: Allocate kernel memory for sending a datagram. + * Parameters + * vcc virtual connection + * size data buffer size + * Return: + * NULL fail + * sk_buff a pointer to a sk_buff + * Description: + * This function can allocate our own additional memory for AAL5S inbound + * header (8bytes). We have to replace the protocol default one (alloc_tx in /net/atm/common.c) + * when we open the device. + * byte alignment is done is DMA driver. + */ +struct sk_buff *amazon_atm_alloc_tx(struct atm_vcc *vcc,unsigned int size) +{ + struct sk_buff *skb; + + if (!dma_may_send(DMA_TX_CH0)){ + AMAZON_TPE_EMSG("no DMA descriptor available!\n"); + return NULL; + } + //AAL5 inbound header space + alignment extra buffer + size+=8+AAL5S_INBOUND_HEADER; + + if (atomic_read(&vcc->tx_inuse) && !atm_may_send(vcc,size)) { + AMAZON_TPE_EMSG("Sorry tx_inuse = %u, size = %u, sndbuf = %u\n", + atomic_read(&vcc->tx_inuse),size,vcc->sk->sndbuf); + return NULL; + } + + skb = amazon_atm_alloc_buffer(size); + if (skb == NULL){ + AMAZON_TPE_EMSG("no memory\n"); + return NULL; + } + AMAZON_TPE_DMSG("dev_alloc_skb(%u) = %x\n", skb->len, (u32)skb); + AMAZON_TPE_DMSG("tx_inuse %u += %u\n",atomic_read(&vcc->tx_inuse),skb->truesize); + atomic_add(skb->truesize+ATM_PDU_OVHD,&vcc->tx_inuse); + + //reserve for AAL5 inbound header + skb_reserve(skb,AAL5S_INBOUND_HEADER); + return skb; +} + + +/* Brief: change per queue QSB setting according to vcc qos parameters + * Paramters: + * vcc: atm_vcc pointer + * qid: CBM queue id (1~15) + * Return: + */ +static inline void set_qsb(struct atm_vcc *vcc, struct atm_qos *qos, int qid) +{ + qsb_qptl_t qptl; + qsb_qvpt_t qvpt; + u32 tmp=0; + unsigned int qsb_clk; + + qsb_clk = amazon_get_fpi_hz()>>1; + + AMAZON_TPE_EMSG("Class=%u MAX_PCR=%u PCR=%u MIN_PCR=%u SCR=%u MBS=%u CDV=%u\n" + ,qos->txtp.traffic_class + ,qos->txtp.max_pcr + ,qos->txtp.pcr + ,qos->txtp.min_pcr + ,qos->txtp.scr + ,qos->txtp.mbs + ,qos->txtp.cdv + ); + + // PCR limiter + if (qos->txtp.max_pcr == 0){ + qptl.bit.tprs = 0; /* 0 disables the PCR limiter */ + }else { + // peak cell rate will be slightly lower than requested (maximum rate / pcr)= (qsbclock/2^3 * timestep/4)/pcr + tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.max_pcr ) + 1; + // check if an overfow occured + if (tmp > QSB_TP_TS_MAX) { + AMAZON_TPE_EMSG("max_pcr is too small, max_pcr:%u tprs:%u\n",qos->txtp.max_pcr, tmp); + qptl.bit.tprs = QSB_TP_TS_MAX; + }else{ + qptl.bit.tprs = tmp; + } + } + //WFQ + if (qos->txtp.traffic_class == ATM_CBR || qos->txtp.traffic_class ==ATM_VBR_RT){ + // real time queue gets weighted fair queueing bypass + qptl.bit.twfq = 0; + }else if (qos->txtp.traffic_class ==ATM_VBR_NRT ||qos->txtp.traffic_class ==ATM_UBR_PLUS ){ + // wfq calculation here are based on virtual cell rates, to reduce granularity for large rates + // wfq factor is maximum cell rate / garenteed cell rate. + //qptl.bit.twfq = g_atm_dev.qsb.min_cr * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr; + if (qos->txtp.min_pcr == 0) { + AMAZON_TPE_EMSG(" MIN_PCR should not be zero\n"); + qptl.bit.twfq = QSB_WFQ_NONUBR_MAX; + }else{ + tmp = QSB_GCR_MIN * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr; + if (tmp == 0 ){ + qptl.bit.twfq = 1; + }else if (tmp > QSB_WFQ_NONUBR_MAX){ + AMAZON_TPE_EMSG("min_pcr is too small, min_pcr:%u twfq:%u\n",qos->txtp.min_pcr, tmp); + qptl.bit.twfq = QSB_WFQ_NONUBR_MAX; + }else{ + qptl.bit.twfq = tmp; + } + } + }else if (qos->txtp.traffic_class == ATM_UBR){ + // ubr bypass, twfq set to maximum value + qptl.bit.twfq = QSB_WFQ_UBR_BYPASS; + }else{ + //tx is diabled, treated as UBR + AMAZON_TPE_EMSG(" unsupported traffic class %u \n", qos->txtp.traffic_class); + qos->txtp.traffic_class = ATM_UBR; + qptl.bit.twfq = QSB_WFQ_UBR_BYPASS; + } + + //SCR Leaky Bucket Shaper VBR.0/VBR.1 + if (qos->txtp.traffic_class ==ATM_VBR_RT || qos->txtp.traffic_class ==ATM_VBR_NRT){ + if (qos->txtp.scr == 0){ + //SCR == 0 disable the shaper + qvpt.bit.ts = 0; + qvpt.bit.taus = 0; + }else{ + //CLP + if (vcc->atm_options&ATM_ATMOPT_CLP){ + //CLP1 + qptl.bit.vbr = 1; + }else{ + //CLP0 + qptl.bit.vbr = 0; + } + //TS and TauS + tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.scr ) + 1; + if (tmp > QSB_TP_TS_MAX) { + AMAZON_TPE_EMSG("scr is too small, scr:%u ts:%u\n",qos->txtp.scr, tmp); + qvpt.bit.ts = QSB_TP_TS_MAX; + }else{ + qvpt.bit.ts = tmp; + } + tmp = (qos->txtp.mbs - 1)*(qvpt.bit.ts - qptl.bit.tprs)/64; + if (tmp > QSB_TAUS_MAX){ + AMAZON_TPE_EMSG("mbs is too large, mbr:%u taus:%u\n",qos->txtp.mbs, tmp); + qvpt.bit.taus = QSB_TAUS_MAX; + }else if (tmp == 0){ + qvpt.bit.taus = 1; + }else{ + qvpt.bit.taus = tmp; + } + } + }else{ + qvpt.w0 = 0; + } + //write the QSB Queue Parameter Table (QPT) + AMAZON_WRITE_REGISTER_L(QSB_QPT_SET_MASK,QSB_RTM_ADDR); + AMAZON_WRITE_REGISTER_L(qptl.w0, QSB_RTD_ADDR); + AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QPT<itf; + u32 dma_qos=0; + u8 * qd_addr=NULL; + + tx_config|=CBM_QD_W3_WM_EN|CBM_QD_W3_CLPt; + //RT: check if the connection is a real time connection + if (vcc->qos.txtp.traffic_class == ATM_CBR || vcc->qos.txtp.traffic_class == ATM_VBR_RT){ + tx_config|= CBM_QD_W3_RT; + }else{ + tx_config|= CBM_QD_W3_AAL5; //don't set the AAL5 flag if it is a RT service + } + rx_config = tx_config; + + if(vcc->qos.aal == ATM_AAL5){ + //QoS: DMA QoS according to the traffic class + switch (vcc->qos.txtp.traffic_class){ + case ATM_CBR: dma_qos = CBR_DMA_QOS;break; + case ATM_VBR_RT: dma_qos = VBR_RT_DMA_QOS;break; + case ATM_VBR_NRT: dma_qos = VBR_NRT_DMA_QOS;break; + case ATM_UBR_PLUS: dma_qos = UBR_PLUS_DMA_QOS;break; + case ATM_UBR: dma_qos = UBR_DMA_QOS;break; + } + + //TX: upstream, AAL5(EPD or PPD), NOINT, SBid + tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK); + //RX: DMA QoS, downstream, no interrupt, AAL5(EPD, PPD), NO INT, HCR +#ifdef AMAZON_TPE_SCR + rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_EOF; +#else + rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_NOINT|CBM_QD_W3_HCR; +#endif + }else { + //should be AAL0 + //upstream, NOINT, SBid + tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK); + //RX: downstream, ACA interrupt, + rx_config |= CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_ACA; + } + + //Threshold: maximum threshold for tx/rx queue, which is adjustable in steps of 64 cells + tx_config |= ( (divide_by_64_round_up(tx_q_threshold)&0xffff)< 1024) + { + AMAZON_TPE_EMSG("timeout\n"); + return -EIO; + } + // write address register, + AMAZON_WRITE_REGISTER_L(idx, HTU_RAMADDR_ADDR); + // configure transmit queue + tmp1 = vpi<<24|vci<<8; + tmp1|= HTU_RAMDAT1_VCON // valid connection the entry is not validated here !!!!!!!!!!!!!!!! + |HTU_RAMDAT1_VCI3 // vci3 -> oam queue + |HTU_RAMDAT1_VCI4 // vci4 -> oam queue + |HTU_RAMDAT1_VCI6 // vci6 -> rm queue + |HTU_RAMDAT1_PTI4 // pti4 -> oam queue + |HTU_RAMDAT1_PTI5; // pti5 -> oam queue + + // ramdat 1 (in params & oam handling) + AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT1_ADDR); + // ramdat 2 (out params & oam handling) + tmp1 = ((qid+CBM_RX_OFFSET)&HTU_RAMDAT2_QID_MASK) + |HTU_RAMDAT2_PTI6 + |HTU_RAMDAT2_PTI7 + |HTU_RAMDAT2_F4U + |HTU_RAMDAT2_F5U + ; + AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT2_ADDR); + wmb(); + // write HTU entry + AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR, HTU_RAMCMD_ADDR); + return 0; +} +/* + * Brief: add HTU table entry + * Parameter: + * vcc: atm_vcc pointer + * qid: CBM queue id + * Return: + * 0: sucessful + * EIO: HTU table entry cannot be written + */ +inline static int set_htu(struct atm_vcc *vcc, u32 qid) +{ + return set_htu_entry(vcc->vpi, vcc->vci, qid, (qid - CBM_DEFAULT_Q_OFFSET)); +} + +/* + * Brief: allocate a queue + * Return: + * <=0 no available queues + * >0 qid + */ +static int atm_allocate_q(short itf) +{ + int i; + u32 tmp1=0; + int qid=0; + amazon_atm_port_t * dev; + dev = &g_atm_dev.ports[itf]; + //find start queue id for this interface + for (i=0; i< itf; i++) + { + qid+= g_atm_dev.ports[i].max_conn; + } + // apply default queue offset ( oam, free cell queue, others, rm ) + qid += CBM_DEFAULT_Q_OFFSET; + tmp1 = qid; + // search for a free queue + while ( (qidmax_conn) + && ( g_atm_dev.queues[qid].free != 1)) { + qid++;; + } + // if none was found, send failure message and return + if ( tmp1+dev->max_conn == qid) + { + return -EFAULT; + } + return qid; + +} +/* Brief: open a aal5 or aal0 connection + */ +static int atm_open(struct atm_vcc *vcc, push_back_t push) +{ + int err=0; + int qid=0; + amazon_atm_port_t * port = & g_atm_dev.ports[vcc->itf]; + unsigned long flags; + /***************** check bandwidth ******************/ + /* 511045:linmars change ATM_VBR_NRT to use scr instead of pcr */ + if ((vcc->qos.txtp.traffic_class==ATM_CBR&&vcc->qos.txtp.max_pcr>port->tx_rem_cr) + ||(vcc->qos.txtp.traffic_class==ATM_VBR_RT&&vcc->qos.txtp.max_pcr>port->tx_rem_cr) + ||(vcc->qos.txtp.traffic_class==ATM_VBR_NRT&&vcc->qos.txtp.scr>port->tx_rem_cr) + ||(vcc->qos.txtp.traffic_class==ATM_UBR_PLUS&&vcc->qos.txtp.min_pcr>port->tx_rem_cr) + ) { + AMAZON_TPE_EMSG("not enough bandwidth left (%u) cells per seconds \n",port->tx_rem_cr); + return -EINVAL; + } + if ( (qid = amazon_atm_find_vpivci(vcc->vpi, vcc->vci)) >0 ){ + AMAZON_TPE_EMSG("vpi:%u vci:%u is alreay open on queue:%u\n", vcc->vpi, vcc->vci, qid); + return -EADDRINUSE; + } + + /***************** allocate entry queueID for this port *****************/ + if ( (qid=atm_allocate_q(vcc->itf)) <= 0){ + AMAZON_TPE_EMSG("port: %u max:%u qid: %u\n", vcc->itf, port->max_conn, qid); + AMAZON_TPE_EMSG("no availabel connections for this port:%u\n",vcc->itf); + return -EINVAL; + } + /**************QSB parameters and CBM descriptors*************/ + set_qsb(vcc, &vcc->qos, qid); + set_qd(vcc, qid); + mb(); + err=set_htu(vcc,qid); + if (err){ + AMAZON_TPE_EMSG("set htu entry fails %u\n",err); + return err; + } + /************set internal mapping*************/ + local_irq_save(flags); + g_atm_dev.queues[qid].free = 0; + g_atm_dev.queues[qid].vcc = vcc; + g_atm_dev.queues[qid].push = push; + g_atm_dev.queues[qid+CBM_RX_OFFSET].free = 0; + g_atm_dev.queues[qid+CBM_RX_OFFSET].vcc = vcc; + g_atm_dev.queues[qid+CBM_RX_OFFSET].push = push; + /******************reserve bandwidth**********************/ + if (vcc->qos.txtp.traffic_class == ATM_CBR){ + //CBR, real time connection, reserve PCR + port->tx_cur_cr += vcc->qos.txtp.max_pcr; + port->tx_rem_cr -= vcc->qos.txtp.max_pcr; + }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){ + //VBR_RT, real time connection, reserve PCR + port->tx_cur_cr += vcc->qos.txtp.max_pcr; + port->tx_rem_cr -= vcc->qos.txtp.max_pcr; + }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){ + //VBR_NRT, reserve SCR + port->tx_cur_cr += vcc->qos.txtp.pcr; + port->tx_rem_cr -= vcc->qos.txtp.pcr; + }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){ + //UBR_PLUS, reserve MCR + port->tx_cur_cr += vcc->qos.txtp.min_pcr; + port->tx_rem_cr -= vcc->qos.txtp.min_pcr; + } + local_irq_restore(flags); + return err; +} +/* Brief: Open ATM connection + * Parameters: atm_vcc - Pointer to VCC data structure + * vpi - VPI value for new connection + * vci - VCI value for new connection + * + * Return: 0 - sucessful + * -ENOMEM - No memory available + * -EINVAL - No bandwidth/queue/ or unsupported AAL type + * Description: + * This function opens an ATM connection on a specific device/interface + * + */ +int amazon_atm_open(struct atm_vcc *vcc,push_back_t push) +{ + int err=0; + + AMAZON_TPE_DMSG("vpi %u vci %u itf %u aal %u\n" + ,vcc->vpi + ,vcc->vci + ,vcc->itf + ,vcc->qos.aal + ); + + AMAZON_TPE_DMSG("tx cl %u bw %u mtu %u\n" + ,vcc->qos.txtp.traffic_class + ,vcc->qos.txtp.max_pcr + ,vcc->qos.txtp.max_sdu + ); + AMAZON_TPE_DMSG("rx cl %u bw %u mtu %u\n" + ,vcc->qos.rxtp.traffic_class + ,vcc->qos.rxtp.max_pcr + ,vcc->qos.rxtp.max_sdu + ); + if (vcc->qos.aal == ATM_AAL5 || vcc->qos.aal == ATM_AAL0){ + err = atm_open(vcc,push); + }else{ + AMAZON_TPE_EMSG("unsupported aal type %u\n", vcc->qos.aal); + err = -EPROTONOSUPPORT; + }; + if (err == 0 ){ + //replace the default memory allocation function with our own + vcc->alloc_tx = amazon_atm_alloc_tx; + set_bit(ATM_VF_READY,&vcc->flags); + } + return err; +} + +/* Brief: Send ATM OAM cell + * Parameters: atm_vcc - Pointer to VCC data structure + * skb - Pointer to sk_buff structure, that contains the data + * Return: 0 - sucessful + * -ENOMEM - No memory available + * -EINVAL - Not supported + * Description: + * This function sends a cell over and ATM connection + * We always release the skb + * TODO: flags handling (ATM_OF_IMMED, ATM_OF_INRATE) + */ +int amazon_atm_send_oam(struct atm_vcc *vcc, void * cell, int flags) +{ + int err=0; + int qid=0; + struct amazon_atm_cell_header * cell_header; + // Get cell header + cell_header = (struct amazon_atm_cell_header*) cell; + if ((cell_header->bit.pti == ATM_PTI_SEGF5) || (cell_header->bit.pti == ATM_PTI_E2EF5)) { + qid = amazon_atm_find_vpivci( cell_header->bit.vpi, cell_header->bit.vci); + }else if (cell_header->bit.vci == 0x3 || cell_header->bit.vci == 0x4) { + //507281:tc.chen qid = amazon_atm_find_vpi((int) cell_header->bit.vpi); + // 507281:tc.chen start + u8 f4_vpi; + f4_vpi = cell_header->bit.vpi; + qid = amazon_atm_find_vpi(f4_vpi ); + // 507281:tc.chen end + }else{ + //non-OAM cells, always invalid + qid = -EINVAL; + } + if (qid == -EINVAL) { + err = -EINVAL; + AMAZON_TPE_EMSG("not valid AAL0 packet\n"); + }else{ + //send the cell using swie +#ifdef TPE_LOOPBACK + err = amazon_atm_swin(AMAZON_ATM_OAM_Q_ID, cell); +#else + err = amazon_atm_swin(qid, cell); +#endif + } + //kfree(cell); + return err; +} + +/* Brief: Send AAL5 frame through DMA + * Parameters: vpi - virtual path id + * vci - virtual circuit id + * clp - cell loss priority + * qid - CBM queue to be sent to + * skb - packet to be sent + * Return: 0 - sucessful + * -ENOMEM - No memory available + * -EINVAL - Not supported + * Description: + * This function sends a AAL5 frame over and ATM connection + * 1. make sure that the data is aligned to 4x32-bit boundary + * 2. provide the inbound data (CPCS-UU and CPI, not used here) + * 3. set CLPn + * 4. send the frame by DMA + * 5. release the buffer ??? + ** use our own allocation alloc_tx + ** we make sure the alignment and additional memory + *** we always release the skb + + */ +int amazon_atm_dma_tx(u8 vpi, u16 vci, u8 clp, u8 qid, struct sk_buff *skb) +{ + int err=0,need_pop=1; + u32 * data=NULL; + int nwrite=0; + struct sk_buff *skb_tmp; + u32 len=skb->len; + + //AAL5S inbound header 8 bytes + if (skb->len > g_atm_dev.aal5.tx_max_sdu - AAL5S_INBOUND_HEADER) { + AMAZON_TPE_DMSG("tx_max_sdu:%u\n",g_atm_dev.aal5.tx_max_sdu); + AMAZON_TPE_DMSG("skb too large [%u]!\n",skb->len); + err = -EMSGSIZE; + goto atm_dma_tx_error_exit; + } + + //Check the byte alignment requirement and header space + if ( ( ((u32)(skb->data)%16) !=AAL5S_INBOUND_HEADER)|| (skb_headroom(skb)len+16); + if (skb_tmp==NULL){ + err = - ENOMEM; + goto atm_dma_tx_error_exit; + } + alloc_align_16(skb_tmp); + g_atm_dev.aal5.cnt_cpy++; + skb_reserve(skb_tmp,AAL5S_INBOUND_HEADER); + memcpy(skb_put(skb_tmp,skb->len), skb->data, skb->len); + amazon_atm_free_tx_skb(skb); + need_pop=0; + skb = skb_tmp; + } + //Provide AAL5S inbound header + data = (u32 *)skb_push(skb,8); + data[0] = __be32_to_cpu(vpi<<20|vci<<4|clp); + data[1] = __be32_to_cpu(g_atm_dev.aal5.padding_byte<<8|qid); + + len = skb->len; + + //send through DMA + AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[0]); + AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[1]); + AMAZON_TPE_DMSG("about to call dma_write len: %u\n", len); + nwrite=dma_device_write( &g_dma_dev,skb->data,len,skb); + if (nwrite != len) { + //DMA descriptors full +// AMAZON_TPE_EMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len); + AMAZON_TPE_DMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len); + err = -EAGAIN; + goto atm_dma_tx_drop_exit; + } + AMAZON_TPE_DMSG("just finish call dma_write\n"); + //release in the "dma done" call-back + return 0; +atm_dma_tx_error_exit: + g_atm_dev.mib_counter.tx_err++; + queue_statics(qid, QS_ERR); + goto atm_dma_tx_exit; + +atm_dma_tx_drop_exit: + g_atm_dev.mib_counter.tx_drop++; + queue_statics(qid, QS_SW_DROP); +atm_dma_tx_exit: + if (need_pop){ + amazon_atm_free_tx_skb(skb); + }else{ + dev_kfree_skb_any(skb); + } + return err; +} + +/* Brief: Send AAL0/AAL5 packet + * Parameters: atm_vcc - Pointer to VCC data structure + * skb - Pointer to sk_buff structure, that contains the data + * Return: 0 - sucessful + * -ENOMEM - No memory available + * -EINVAL - Not supported + * Description: + * See amazon_atm_dma_tx + */ +int amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb) +{ + int qid=0; + u8 clp=0; + int err=0; + u32 wm=0; + + if (vcc == NULL || skb == NULL){ + AMAZON_TPE_EMSG("invalid parameter\n"); + return -EINVAL; + } + ATM_SKB(skb)->vcc = vcc; + qid = amazon_atm_get_queue(vcc); + if (valid_qid(qid) != 1) { + AMAZON_TPE_EMSG("invalid vcc!\n"); + err = -EINVAL; + goto atm_send_err_exit; + } + + //Send AAL0 using SWIN + if (vcc->qos.aal == ATM_AAL0){ +#ifdef TPE_LOOPBACK + err=amazon_atm_swin((qid+CBM_RX_OFFSET), skb->data); +#else + err=amazon_atm_swin(qid, skb->data); +#endif + if (err){ + goto atm_send_err_exit; + } + goto atm_send_exit; + } + + //Should be AAl5 + //MIB counter + g_atm_dev.mib_counter.tx++; + adsl_led_flash();//joelin adsl led + queue_statics(qid, QS_PKT); + +#ifdef AMAZON_CHECK_LINK + //check adsl link + if (adsl_link_status == 0){ + //link down + AMAZON_TPE_DMSG("ADSL link down, discarded!\n"); + err=-EFAULT; + goto atm_send_drop_exit; + } +#endif + clp = (vcc->atm_options&ATM_ATMOPT_CLP)?1:0; + //check watermark first + wm = readl(CBM_WMSTAT0_ADDR); + if ( (wm & (1<qos.txtp.traffic_class != ATM_CBR + &&vcc->qos.txtp.traffic_class != ATM_VBR_RT) + &(wm & (CBM_WM_NRT_MASK | (clp&CBM_WM_CLP1_MASK)) ))){ + //wm hit: discard + AMAZON_TPE_DMSG("watermark hit, discarded!\n"); + err=-EFAULT; + goto atm_send_drop_exit; + } +#ifdef TPE_LOOPBACK + return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, (qid+CBM_RX_OFFSET),skb); +#else + return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, qid,skb); +#endif + +atm_send_exit: + amazon_atm_free_tx_skb_vcc(vcc,skb); + return 0; + +atm_send_drop_exit: + g_atm_dev.mib_counter.tx_drop++; + queue_statics(qid,QS_SW_DROP); +atm_send_err_exit: + amazon_atm_free_tx_skb_vcc(vcc,skb); + return err; +} + +/* Brief: Return ATM port related MIB + * Parameter: interface number + atm_cell_ifEntry_t + */ +int amazon_atm_cell_mib(atm_cell_ifEntry_t* to,u32 itf) +{ + g_atm_dev.mib_counter.htu_unp += readl(HTU_MIBCIUP); + to->ifInUnknownProtos = g_atm_dev.mib_counter.htu_unp; +#ifdef AMAZON_TPE_READ_ARC + u32 reg_val=0; + meiDebugRead((AR_CELL0_ADDR+itf*4),®_val,1); + g_atm_dev.mib_counter.rx_cells += reg_val; + reg_val=0; + meiDebugWrite((AR_CELL0_ADDR+itf*4),®_val,1); + to->ifHCInOctets_h = (g_atm_dev.mib_counter.rx_cells * 53)>>32; + to->ifHCInOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff; + + meiDebugRead((AT_CELL0_ADDR+itf*4),®_val,1); + g_atm_dev.mib_counter.tx_cells += reg_val; + reg_val=0; + meiDebugWrite((AT_CELL0_ADDR+itf*4),®_val,1); + to->ifHCOutOctets_h = (g_atm_dev.mib_counter.tx_cells * 53)>>32; + to->ifHCOutOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff; + + meiDebugRead((AR_CD_CNT0_ADDR+itf*4),®_val,1); + g_atm_dev.mib_counter.rx_err_cells += reg_val; + reg_val=0; + meiDebugWrite((AR_CD_CNT0_ADDR+itf*4),®_val,1); + to->ifInErrors = g_atm_dev.mib_counter.rx_err_cells; + + to->ifOutErrors = 0; +#else + to->ifHCInOctets_h = 0; + to->ifHCInOctets_l = 0; + to->ifHCOutOctets_h = 0; + to->ifHCOutOctets_l = 0; + to->ifInErrors = 0; + to->ifOutErrors = 0; +#endif + return 0; +} + +/* Brief: Return ATM AAL5 related MIB + * Parameter: + atm_aal5_ifEntry_t + */ +int amazon_atm_aal5_mib(atm_aal5_ifEntry_t* to) +{ + u32 reg_l,reg_h; + //AAL5R received Octets from ATM + reg_l = readl(AAL5_RIOL_ADDR); + reg_h = readl(AAL5_RIOM_ADDR); + g_atm_dev.mib_counter.rx_cnt_h +=reg_h; + if (reg_l + g_atm_dev.mib_counter.rx_cnt_l < reg_l){ + g_atm_dev.mib_counter.rx_cnt_h++; + } + + g_atm_dev.mib_counter.rx_cnt_l+= reg_l; + //AAL5S sent Octets to ATM + reg_l = readl(AAL5_SOOL_ADDR); + reg_h = readl(AAL5_SOOM_ADDR); + g_atm_dev.mib_counter.tx_cnt_h +=reg_h; + if (reg_l + g_atm_dev.mib_counter.tx_cnt_l < reg_l){ + g_atm_dev.mib_counter.tx_cnt_h++; + } + g_atm_dev.mib_counter.tx_cnt_l+= reg_l; + + + g_atm_dev.mib_counter.tx_ppd += readl(CBM_AAL5ODIS_ADDR); + g_atm_dev.mib_counter.rx_drop += readl(CBM_AAL5IDIS_ADDR); + + //store + to->ifHCInOctets_h = g_atm_dev.mib_counter.rx_cnt_h; + to->ifHCInOctets_l = g_atm_dev.mib_counter.rx_cnt_l; + to->ifHCOutOctets_h = g_atm_dev.mib_counter.tx_cnt_h; + to->ifHCOutOctets_l = g_atm_dev.mib_counter.tx_cnt_l; + to->ifOutDiscards = g_atm_dev.mib_counter.tx_drop; + to->ifInDiscards = g_atm_dev.mib_counter.rx_drop; + + //Software provided counters + //packets passed to higher layer + to->ifInUcastPkts = g_atm_dev.mib_counter.rx; + //packets passed from higher layer + to->ifOutUcastPkts = g_atm_dev.mib_counter.tx; + //number of wrong downstream packets + to->ifInErrors = g_atm_dev.mib_counter.rx_err; + //number of wrong upstream packets + to->ifOutErros = g_atm_dev.mib_counter.tx_err; + + return 0; +} +/* Brief: Return ATM AAL5 VCC related MIB from internale use + * Parameter: + * qid + * atm_aal5_vcc_t + */ +static int __amazon_atm_vcc_mib(int qid, atm_aal5_vcc_t* to) +{ + //aal5VccCrcErrors + to->aal5VccCrcErrors = g_atm_dev.queues[qid].aal5VccCrcErrors; + to->aal5VccOverSizedSDUs =g_atm_dev.queues[qid].aal5VccOverSizedSDUs; + to->aal5VccSarTimeOuts = 0; //not supported yet + return 0; +} +/* Brief: Return ATM AAL5 VCC related MIB from vpi/vci + * Parameter: atm_vcc + * atm_aal5_vcc_t + */ +int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to) +{ + int qid=0; + int err=0; + qid = amazon_atm_find_vpivci(vpi, vci); + if (qid >0 ){ + err = __amazon_atm_vcc_mib(qid,to); + }else{ + return -EINVAL; + } + return err; +} + + +/* Brief: Return ATM AAL5 VCC related MIB + * Parameter: atm_vcc + * atm_aal5_vcc_t + */ +int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t* to) +{ + int qid=0; + int err=0; + qid = amazon_atm_get_queue(vcc); + if (qid >0 ){ + err = __amazon_atm_vcc_mib(qid,to); + }else{ + return -EINVAL; + } + return err; +} + +/* Brief: Close ATM connection + * Parameters: atm_vcc - Pointer to VCC data structure + * Return: no + * Description: + * This function closes the given ATM connection + */ +void amazon_atm_close(struct atm_vcc *vcc){ + int i; + int qid=0; + u32 tmp1; + u8 * qd_addr; + unsigned long flags; + if (vcc == NULL){ + AMAZON_TPE_EMSG("invalid parameter. vcc is null\n"); + return; + } + u32 itf = (u32) vcc->itf; + //release bandwidth + if (vcc->qos.txtp.traffic_class == ATM_CBR){ + g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr; + g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr; + }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){ + g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr; + g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr; + }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){ + g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.pcr; + g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.pcr; + }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){ + g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.min_pcr; + g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.min_pcr; + } + + qid = amazon_atm_get_queue(vcc); + if (qid == -EINVAL){ + AMAZON_TPE_EMSG("unknown vcc %u.%u.%u\n", vcc->itf, vcc->vpi, vcc->vci); + return; + } + local_irq_save(flags); + //Disable HTU entry + i=0; + while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < HTU_RAM_ACCESS_MAX) i++; + if (i == HTU_RAM_ACCESS_MAX){ + AMAZON_TPE_EMSG("HTU RAM ACCESS out of time\n"); + } + + // write address register + AMAZON_WRITE_REGISTER_L(qid - CBM_DEFAULT_Q_OFFSET, HTU_RAMADDR_ADDR); + // invalidate the connection + AMAZON_WRITE_REGISTER_L(0, HTU_RAMDAT1_ADDR); + // write command + AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR,HTU_RAMCMD_ADDR); + + qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); +#ifdef AMAZON_ATM_DEBUG + tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x8) & 0xffff; + AMAZON_TPE_DMSG("TX queue has %u cells \n", tmp1); + tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x08)&0xffff; + AMAZON_TPE_DMSG("RX queue has %u cells \n", tmp1); +#endif + // set threshold of txqueue to 0 + tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x0c); + tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK); + AMAZON_WRITE_REGISTER_L(tmp1, (qd_addr+qid*CBM_QD_SIZE+0x0c)); + // set threshold of rxqueue to 0 + tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c); + tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK); + AMAZON_WRITE_REGISTER_L(tmp1,(qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c)); + + //clear internal mapping + amazon_atm_clear_vcc(qid); + amazon_atm_clear_vcc(qid+CBM_RX_OFFSET); + + local_irq_restore(flags); +} + + +/* Brief: initialize internal data structure + */ +static void atm_constructor(amazon_atm_dev_t * dev) +{ + int i; + memset(dev,0,sizeof(amazon_atm_dev_t)); + atm_init_parameters(dev); + //internal: queue "free" flag + for(i=1;iqueues[i].vcc=NULL; + dev->queues[i].free = 1; + } + for(i=0;iports[i].tx_rem_cr = dev->ports[i].tx_max_cr; + } + //MIB + atomic_set(&dev->dma_tx_free_0,1); //initially there should be free descriptors +} + +/* Brief: return round up base-2 logarithm + */ +static inline int get_log_2(u32 value) +{ + int i=0,j=1; + while (i<11){ + if (j>=value) break; + j=j<<1; + i++; + } + AMAZON_TPE_DMSG("round up base-2 logarithm of %u is %u\n", value, i); + return i; +} + +/* Brief: TPE hardware initialization + * Parameter: specifiy the configurations of the hardware + */ +static inline int atm_init_hard(amazon_atm_dev_t * dev) +{ + int i; + u32 tmp1, tmp2, tmp3; + u8 * mem_addr=NULL; + u8 * qd_addr=NULL; + //PMU power on the module 1st + *(AMAZON_PMU_PWDCR) = (*AMAZON_PMU_PWDCR) | (AMAZON_PMU_PWDCR_TPE); + //Reset the module + *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_TPE); + mb(); + mdelay(100); + *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~(AMAZON_RST_REQ_TPE)); + mb(); + + unsigned long qsb_clk = amazon_get_fpi_hz()>>1; + /*********allocate & arrange memory for CBM *********/ + if (dev->cbm.mem_addr == NULL){ + dev->cbm.allocated = 1; + mem_addr = (u8 *)__get_free_pages(GFP_KERNEL, get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1)); + if (mem_addr != NULL){ + dev->cbm.mem_addr = mem_addr; + } else { + goto init_no_mem; + } + } + if (dev->cbm.qd_addr == NULL){ +#ifdef CONFIG_USE_VENUS + //to work around a bug, bit15 of QDOFF address should be 1,Aug4, 2004 + //thus, we allocate 64k memory + qd_addr = (u8 *)__get_free_pages(GFP_KERNEL, 4); + if (qd_addr != NULL) { + dev->cbm.qd_addr_free = (u8*) (((unsigned long) qd_addr)); + dev->cbm.qd_addr = (u8*) (((unsigned long) qd_addr) | 0x8000); + }else{ + goto init_no_mem; + } +#else //CONFIG_USE_VENUS + qd_addr = (u8 *)kmalloc( CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM, GFP_KERNEL); + if (qd_addr != NULL) { + dev->cbm.qd_addr = qd_addr; + }else { + goto init_no_mem; + } +#endif //CONFIG_USE_VENUS + } +//#ifndef CONFIG_MIPS_UNCACHED + mem_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.mem_addr); + qd_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.qd_addr); +//#endif + //CBM reset cell queue memory, 64 bytes / cell + memset_io(mem_addr, 0, CBM_CELL_SIZE * dev->cbm.free_cell_cnt); + //make a link list, last 4 bytes is pointer + for(i=1;icbm.free_cell_cnt;i++){ + AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * i)),(mem_addr + CBM_CELL_SIZE * (i-1) + 0x3c)); + } + //reset queue descriptor + memset_io(qd_addr, 0, CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM); + //init word 0-2 of q0 (free cell list) + //address of last cell + AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * (dev->cbm.free_cell_cnt-1))), qd_addr); + //address of first cell + AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr)), (qd_addr + 4)); + //no. of free cells + AMAZON_WRITE_REGISTER_L(dev->cbm.free_cell_cnt,(qd_addr + 8)); + //init q descriptor for OAM receiving + AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (divide_by_64_round_up(oam_q_threshold)&0xff)<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c)); +// AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (u32)oam_q_threshold<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c)); + //config CBM + //set offset address and threshold + AMAZON_WRITE_REGISTER_L(CPHYSADDR(qd_addr), CBM_QDOFF_ADDR); + AMAZON_WRITE_REGISTER_L(((dev->cbm.nrt_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_NRTTHR_ADDR); + AMAZON_WRITE_REGISTER_L(((dev->cbm.clp0_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP0THR_ADDR); + AMAZON_WRITE_REGISTER_L(((dev->cbm.clp1_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP1THR_ADDR); + //config interrupts + AMAZON_WRITE_REGISTER_L( CBM_IMR_MASK & (~(CBM_IMR_ACA|CBM_IMR_Q0E|CBM_IMR_Q0I|CBM_IMR_RDE|CBM_IMR_OPF|CBM_IMR_ERR +#ifdef AMAZON_ATM_DEBUG + |CBM_IMR_DISC|CBM_IMR_QFD|CBM_IMR_NFCA|CBM_IMR_CLP1TR|CBM_IMR_CLP0TR|CBM_IMR_NRTTR|CBM_IMR_QTR +#endif +#ifdef AMAZON_TPE_SCR + |CBM_IMR_EF +#endif + )), CBM_IMR0_ADDR); + AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR); + + //HTU + //RAM entry for number of possible connections per interface + tmp1 = dev->ports[0].max_conn?dev->ports[0].max_conn-1:0; + AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR); + for(i=1;iports[i].max_conn; + AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR + 4 * i); + } + dev->cbm.max_q_off = tmp1+1; + //Queue ID for OAM/RM/Other cells + AMAZON_WRITE_REGISTER_L (AMAZON_ATM_OAM_Q_ID, HTU_DESTOAM_ADDR); + AMAZON_WRITE_REGISTER_L( AMAZON_ATM_RM_Q_ID, HTU_DESTRM_ADDR); + AMAZON_WRITE_REGISTER_L( AMAZON_ATM_OTHER_Q_ID, HTU_DESTOTHER_ADDR); + //Timeout + AMAZON_WRITE_REGISTER_L((u32) HTUTIMEOUT, HTU_TIMEOUT_ADDR); +#ifdef AMAZON_ATM_DEBUG + AMAZON_WRITE_REGISTER_L((u32) HTU_ISR_MASK + &(~(HTU_ISR_NE|HTU_ISR_TORD|HTU_ISR_OTOC|HTU_ISR_ONEC|HTU_ISR_PNE|HTU_ISR_PT)), HTU_IMR0_ADDR); + AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS|SRC_SRE_ENABLE|AMAZON_HTU_INT,HTU_SRC0_ADDR); +#endif + //QSB + //global setting, TstepC, SBL, Tau + //Tau + AMAZON_WRITE_REGISTER_L(dev->qsb.tau, QSB_TAU_ADDR); + //SBL + AMAZON_WRITE_REGISTER_L(dev->qsb.sbl, QSB_SBL_ADDR); + //tstep + AMAZON_WRITE_REGISTER_L(dev->qsb.tstepc>>1, QSB_CONFIG_ADDR); + + //port settting + for(i=0;iports[i].enable) && (dev->ports[i].tx_max_cr!=0) ){ + tmp1 = ((qsb_clk * dev->qsb.tstepc) >>1) / dev->ports[i].tx_max_cr; + tmp2 = tmp1 / 64; //integer value of Tsb + tmp3 = tmp1%64 + 1; //fractional part of Tsb + //carry over to integer part (?) + if (tmp3 == 64) { + tmp3 = 0; + tmp2++; + } + if (tmp2 == 0){ + tmp2 = 1; + tmp3 = 1; + } + //1. set mask 2. write value to data transfer register 3. start the transfer + //SCT(FracRate) + AMAZON_WRITE_REGISTER_L(QSB_SET_SCT_MASK, QSB_RTM_ADDR); + AMAZON_WRITE_REGISTER_L(tmp3,QSB_RTD_ADDR); + AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SCT<aal5.tx_max_sdu,AAL5_SMFL_ADDR); + AMAZON_WRITE_REGISTER_L(dev->aal5.rx_max_sdu,AAL5_RMFL_ADDR); + AMAZON_WRITE_REGISTER_L(AAL5_SCMD_MODE_POLL // enable polling mode + |AAL5_SCMD_SS + |AAL5_SCMD_AR + ,AAL5_SCMD_ADDR); + //start CBM + AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR); + wmb(); + return 0; +init_no_mem: + if (mem_addr != NULL) free_pages((unsigned long)mem_addr,get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1)); + +#ifdef CONFIG_USE_VENUS + //to work around a bug, bit15 of QDOFF address should be 1 + if (qd_addr != NULL) free_pages((unsigned long)qd_addr,4); +#else //CONFIG_USE_VENUS + if (qd_addr != NULL) kfree(qd_addr); +#endif //CONFIG_USE_VENUS + return -ENOMEM; +} + +/* + * Brief: Create entry in /proc for status information + */ +void atm_create_proc(void) +{ + create_proc_read_entry("amazon_atm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_ATM); + create_proc_read_entry("amazon_atm_mib", 0,NULL, amazon_atm_read_procmem,(void*)PROC_MIB); + create_proc_read_entry("amazon_atm_vcc", 0,NULL, amazon_atm_read_procmem,(void*)PROC_VCC); +#if 0 + create_proc_read_entry("amazon_atm_aal5", 0,NULL, amazon_atm_read_procmem,(void*)PROC_AAL5); + create_proc_read_entry("amazon_atm_cbm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_CBM); + create_proc_read_entry("amazon_atm_htu", 0,NULL, amazon_atm_read_procmem,(void*)PROC_HTU); + create_proc_read_entry("amazon_atm_qsb", 0,NULL, amazon_atm_read_procmem,(void*)PROC_QSB); + create_proc_read_entry("amazon_atm_swie", 0,NULL, amazon_atm_read_procmem,(void*)PROC_SWIE); +#endif +} + +/* + * Brief: Delete entry in /proc for status information + */ +void atm_delete_proc(void) +{ + remove_proc_entry("amazon_atm", NULL); + remove_proc_entry("amazon_atm_mib", NULL); + remove_proc_entry("amazon_atm_vcc", NULL); +#if 0 + remove_proc_entry("amazon_atm_aal5", NULL); + remove_proc_entry("amazon_atm_cbm", NULL); + remove_proc_entry("amazon_atm_htu", NULL); + remove_proc_entry("amazon_atm_qsb", NULL); + remove_proc_entry("amazon_atm_swie", NULL); +#endif +} +/* Brief: Initialize ATM module + * Parameters: no + * Return: &g_atm_dev - sucessful + * NULL - fails: + * 1. invalid parameter + * 2. No memory available + * Description: + * This function configure the TPE components according to the input info, + * -CBM + * -HTU + * -QSB + * -AAL5 + * + */ +amazon_atm_dev_t * amazon_atm_create(void) +{ + int i; + AMAZON_TPE_DMSG("atm_init\n"); + /************initialize global data structure****************/ + atm_constructor(&g_atm_dev); + /***********allocate kernel resources****************/ + //bottom halfs for SWEX + swex_start_task.routine = amazon_atm_swex; + swex_start_task.data = NULL; + swex_complete_task.routine = amazon_atm_swex_push; + swex_complete_task.data = NULL; +#ifdef AMAZON_TPE_SCR + a5r_task.routine = amazon_atm_a5r; + a5r_task.data = NULL; +#endif //AMAZON_TPE_SCR + //SWIN semaphore + sema_init(&(g_atm_dev.swie.in_sem), 1); + //SWIE lock + clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock)); + //SWIE wait queue + init_waitqueue_head(&(g_atm_dev.swie.sleep)); + atm_create_proc(); + + //register DMA + memset(&g_dma_dev,0,sizeof(struct dma_device_info)); + strcpy(g_dma_dev.device_name,"TPE"); + g_dma_dev.weight=1; + g_dma_dev.num_tx_chan=2; + g_dma_dev.num_rx_chan=2; + g_dma_dev.ack=1; + g_dma_dev.tx_burst_len=4; + g_dma_dev.rx_burst_len=4; + //DMA TX + + for(i=0;i<1;i++){ + g_dma_dev.tx_chan[i].weight=QOS_DEFAULT_WGT; + g_dma_dev.tx_chan[i].desc_num=10; + g_dma_dev.tx_chan[i].packet_size=g_atm_dev.aal5.tx_max_sdu + AAL5S_INBOUND_HEADER; + g_dma_dev.tx_chan[i].control=1; + } + //DMA RX + for(i=0;i<2;i++){ + g_dma_dev.rx_chan[i].weight=QOS_DEFAULT_WGT; + /* BingTao's suggestion, change from 5->10 will prevent packet loss in NO_TX_INT mode */ + g_dma_dev.rx_chan[i].desc_num=10; + g_dma_dev.rx_chan[i].packet_size=(g_atm_dev.aal5.rx_max_sdu + AAL5R_TRAILER_LEN+0x10f)&(~0xf); + g_dma_dev.rx_chan[i].control=1; + } + g_dma_dev.intr_handler=amazon_atm_dma_handler; + g_dma_dev.buffer_alloc=amazon_atm_alloc_rx; + g_dma_dev.buffer_free=amazon_atm_free_tx; + dma_device_register(&g_dma_dev); +/***********intialize the atm hardware ****************/ + if ( atm_init_hard(&g_atm_dev) != 0){ + return NULL; + } + //start CBM + AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR); + wmb(); + + //Start HTU + AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR); + wmb(); + + + // Register interrupts for insertion and extraction + request_irq(AMAZON_SWIE_INT, amazon_atm_swie_isr, IRQF_DISABLED, "tpe_swie", NULL); + request_irq(AMAZON_CBM_INT, amazon_atm_cbm_isr, IRQF_DISABLED, "tpe_cbm", NULL); +#ifdef AMAZON_ATM_DEBUG + request_irq(AMAZON_HTU_INT , amazon_atm_htu_isr, IRQF_DISABLED, "tpe_htu", NULL); +#endif +#ifdef AMAZON_TPE_TEST_AAL5_INT + request_irq(AMAZON_AAL5_INT, amazon_atm_aal5_isr, IRQF_DISABLED, "tpe_aal5", NULL); +#endif + return &g_atm_dev; +} + +/* Brief: clean up atm + * Parameters: no + * Return: no + * Description: + * Disable the device. + */ +void amazon_atm_cleanup(void){ + int i; + clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock)); + wake_up(&g_atm_dev.swie.sleep); + up(&g_atm_dev.swie.in_sem); + // diable SWIE interrupts + AMAZON_WRITE_REGISTER_L(0, SWIE_ISRC_ADDR); + AMAZON_WRITE_REGISTER_L(0, SWIE_ESRC_ADDR); + wmb(); + + // Disable schedulers ( including interrupts )----------------------- + for (i = 0; i < AMAZON_ATM_PORT_NUM; i++); + { + AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_SBVALID_MASK, QSB_RTM_ADDR); + AMAZON_WRITE_REGISTER_L( 0 ,QSB_RTD_ADDR); + AMAZON_WRITE_REGISTER_L( (QSB_TABLESEL_SPT<>PAGE_SHIFT)+1)); +#ifdef CONFIG_USE_VENUS + //to work around a bug, bit15 of QDOFF address should be 1 + free_pages((unsigned long)g_atm_dev.cbm.qd_addr_free,4); +#else //CONFIG_USE_VENUS + kfree(g_atm_dev.cbm.qd_addr); +#endif //CONFIG_USE_VENUS + } + atm_delete_proc(); + // free interrupts for insertion and extraction + dma_device_unregister(&g_dma_dev); + free_irq(AMAZON_SWIE_INT, NULL); + free_irq(AMAZON_CBM_INT, NULL); +#ifdef AMAZON_ATM_DEBUG + free_irq(AMAZON_HTU_INT, NULL); +#endif +#ifdef AMAZON_TPE_TEST_AAL5_INT + free_irq(AMAZON_AAL5_INT, NULL); +#endif + +} + +/************************ ATM network interface ***********************************************/ +/* Brief: getsockopt + */ +int amazon_atm_getsockopt(struct atm_vcc *vcc, int level, int optname, char *optval, int optlen) +{ + int err=0; + atm_aal5_vcc_t mib_vcc; + AMAZON_TPE_DMSG("1\n"); + switch (optname){ + case SO_AMAZON_ATM_MIB_VCC: + AMAZON_TPE_DMSG("2\n"); + err = amazon_atm_vcc_mib(vcc, &mib_vcc); + AMAZON_TPE_DMSG("%u\n",mib_vcc.aal5VccCrcErrors); + err = copy_to_user((void *)optval,&mib_vcc, sizeof(mib_vcc)); + AMAZON_TPE_DMSG("err %u\n",err); + break; + default: + return -EFAULT; + } + return err; +} + +/* Brief: IOCTL + */ + +int amazon_atm_ioctl(struct atm_dev *dev,unsigned int cmd,void *arg) +{ + int err=0; + //MIB + atm_cell_ifEntry_t mib_cell; + atm_aal5_ifEntry_t mib_aal5; + atm_aal5_vcc_x_t mib_vcc; + if (_IOC_TYPE(cmd) != AMAZON_ATM_IOC_MAGIC) return -ENOTTY; + if (_IOC_NR(cmd) > AMAZON_ATM_IOC_MAXNR) return -ENOTTY; + + if (_IOC_DIR(cmd) & _IOC_READ) + err = !access_ok(VERIFY_WRITE, (void *)arg, _IOC_SIZE(cmd)); + else if (_IOC_DIR(cmd) & _IOC_WRITE) + err = !access_ok(VERIFY_READ, (void *)arg, _IOC_SIZE(cmd)); + if (err) { + AMAZON_TPE_EMSG("acess verification fails \n"); + return -EFAULT; + } + switch(cmd) { + case AMAZON_ATM_MIB_CELL: + err = amazon_atm_cell_mib(&mib_cell,(u32)arg); + if (err==0){ + err = __copy_to_user((void *)arg,&mib_cell,sizeof(mib_cell)); + }else{ + AMAZON_TPE_EMSG("cannot get MIB ATM_CELL\n"); + } + break; + case AMAZON_ATM_MIB_AAL5: + err = amazon_atm_aal5_mib(&mib_aal5); + if (err==0){ + err=__copy_to_user(arg, &mib_aal5, sizeof(mib_aal5)); + }else{ + AMAZON_TPE_EMSG("cannot get MIB ATM_AAL5\n"); + } + break; + case AMAZON_ATM_MIB_VCC: + err=__copy_from_user(&mib_vcc,arg, sizeof(mib_vcc)); + AMAZON_TPE_DMSG("return of copy_from_user %x\n",err); + err = amazon_atm_vcc_mib_x(mib_vcc.vpi, mib_vcc.vci, &(mib_vcc.mib_vcc)); + if (err==0){ + err=__copy_to_user(arg, &mib_vcc, sizeof(mib_vcc)); + }else{ + AMAZON_TPE_EMSG("cannot get MIB ATM_VCC\n"); + } + + default: + return -ENOTTY; + } + return err; +} +/* Brief: return a link list of OAM related time stamp info + * Parameter: none + * Return: + a link list of "struct oam_last_activity" data + * Description: + Each time, a F4/F5 cell or AAL5 packet is received, the time stamp is updated. + Through this call, u get a list of this time stamp for all active connection. + Please note that u have read-only access. + */ +const struct oam_last_activity* get_oam_time_stamp() +{ + int i,j; + for(i=CBM_DEFAULT_Q_OFFSET+CBM_RX_OFFSET,j=0;ivpi; + g_oam_time_stamp[j].vci = g_atm_dev.queues[i].vcc->vci; + g_oam_time_stamp[j].stamp = g_atm_dev.queues[i].access_time; + g_oam_time_stamp[j].next = NULL; + j++; + } + } + if (j==0) { + return NULL; + }else{ + return g_oam_time_stamp; + } +} + + +/* Brief: call back routine for rx + * Parameter: + * vcc atm_vcc pointer + * skb data if no error + err error flag, 0: no error, 1:error + * Return: + * 0 + * <>0 cannot push up + * Description: + * release the packet if cannot push up + */ +static int amazon_atm_net_push(struct atm_vcc *vcc,struct sk_buff *skb, int err) +{ + if (err){ + if (vcc && vcc->stats) { + atomic_inc(&vcc->stats->rx_err); + } + }else{ + ATM_SKB(skb)->vcc = vcc; + + if (!atm_charge(vcc, skb->truesize)){ + //no space this vcc + AMAZON_TPE_EMSG("no space for this vcc\n"); + dev_kfree_skb_any(skb); + return -ENOMEM; + } + atomic_inc(&vcc->stats->rx); + AMAZON_TPE_DMSG("push to vcc\n"); + vcc->push(vcc,skb); + } + return 0; +} +int amazon_atm_net_send_oam(struct atm_vcc*vcc, void *cell, int flags) +{ + return amazon_atm_send_oam(vcc,cell,flags); +} + +int amazon_atm_net_send(struct atm_vcc *vcc,struct sk_buff *skb) +{ + int err=0; + if (vcc->qos.aal == ATM_AAL0 || vcc->qos.aal == ATM_AAL5) { + err=amazon_atm_send(vcc,skb); + }else{ + //not supported + err = -EPROTONOSUPPORT; + } + if (err){ + atomic_inc(&vcc->stats->tx_err); + }else{ + atomic_inc(&vcc->stats->tx); + } + AMAZON_TPE_DMSG("sent, tx_inuse:%u\n", atomic_read(&vcc->tx_inuse)); + return err; +} + +int amazon_atm_net_open(struct atm_vcc *vcc,short vpi, int vci) +{ + vcc->itf = (int) vcc->dev->dev_data; + vcc->vpi = vpi; + vcc->vci = vci; + return(amazon_atm_open(vcc,amazon_atm_net_push)); +} + +static int amazon_atm_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flgs) +{ + int qid; + + if (vcc == NULL || qos == NULL){ + AMAZON_TPE_EMSG("invalid parameters\n"); + return -EINVAL; + } + qid = amazon_atm_get_queue(vcc); + if (valid_qid(qid) != 1) { + AMAZON_TPE_EMSG("no vcc connection opened\n"); + return -EINVAL; + } + set_qsb(vcc,qos,qid); + return 0; +} + +static struct atmdev_ops amazon_atm_ops = { + open: amazon_atm_net_open, + close: amazon_atm_close, + ioctl: amazon_atm_ioctl, + send: amazon_atm_net_send, + send_oam: amazon_atm_net_send_oam, +// getsockopt: amazon_atm_getsockopt, + change_qos: amazon_atm_change_qos, +// proc_read: amazon_atm_proc_read, + owner: THIS_MODULE, +}; // ATM device callback functions + +/* + * brief "/proc" function + */ +int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data) +{ + int buf_off=0; /* for buf */ + int i=0,j=0; + int type= (u32)data;//which module + atm_aal5_ifEntry_t mib_aal5; + atm_cell_ifEntry_t mib_cell; + atm_aal5_vcc_t mib_vcc; + switch(type){ + case PROC_MIB: + //MIB counter + amazon_atm_aal5_mib(&mib_aal5); + //TX: + buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Upstream =========\n"); + buf_off+=sprintf(buf+buf_off,"received %u (pkts) from upper layer\n", mib_aal5.ifOutUcastPkts); + buf_off+=sprintf(buf+buf_off,"errors: %u (pkts)\n",mib_aal5.ifOutErros); + buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n", mib_aal5.ifOutDiscards); + buf_off+=sprintf(buf+buf_off,"transmitted: %x-%x (bytes) \n", + mib_aal5.ifHCOutOctets_h, mib_aal5.ifHCOutOctets_l); + //RX: + buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Downstream =========\n"); + buf_off+=sprintf(buf+buf_off,"received %x-%x (bytes)\n", + mib_aal5.ifHCInOctets_h,mib_aal5.ifHCInOctets_l); + buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n",mib_aal5.ifInDiscards); + buf_off+=sprintf(buf+buf_off,"errors: %u (ptks)\n",mib_aal5.ifInErrors); + buf_off+=sprintf(buf+buf_off,"passed %u (ptks) to upper layer\n",mib_aal5.ifInUcastPkts); + + //Cell level + buf_off+=sprintf(buf+buf_off,"\n============= ATM Cell =========\n"); + amazon_atm_cell_mib(&mib_cell,0); +#ifdef AMAZON_TPE_READ_ARC + buf_off+=sprintf(buf+buf_off,"Port 0: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l); + buf_off+=sprintf(buf+buf_off,"Port 0: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l); + buf_off+=sprintf(buf+buf_off,"Port 0: downstream errors: %u (cells)\n",mib_cell.ifInErrors); + amazon_atm_cell_mib(&mib_cell,1); + buf_off+=sprintf(buf+buf_off,"Port 1: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l); + buf_off+=sprintf(buf+buf_off,"Port 1: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l); + buf_off+=sprintf(buf+buf_off,"Port 1: downstream errors: %u (cells)\n",mib_cell.ifInErrors); +#endif + buf_off+=sprintf(buf+buf_off,"HTU discards: %u (cells)\n",mib_cell.ifInUnknownProtos); + + buf_off+=sprintf(buf+buf_off,"\n====== Specials =====\n"); + buf_off+=sprintf(buf+buf_off,"AAL5S PPD: %u (cells)\n",g_atm_dev.mib_counter.tx_ppd); +#ifdef AMAZON_TPE_SCR + buf_off+=sprintf(buf+buf_off,"Reassembly wait: %u \n",g_a5r_wait); +#endif + break; + case PROC_ATM: + //Interface (Port) + buf_off+=sprintf(buf+buf_off,"[Interfaces]\n"); + for(i=0;ivpi + ,g_atm_dev.queues[i].vcc->vci + ,g_atm_dev.queues[i].vcc->itf + ,i + ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_sec + ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_usec + ); + buf_off+=sprintf(buf+buf_off,"\tqos_tx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n" + ,g_atm_dev.queues[i].vcc->qos.txtp.traffic_class + ,g_atm_dev.queues[i].vcc->qos.txtp.max_pcr + ,g_atm_dev.queues[i].vcc->qos.txtp.pcr + ,g_atm_dev.queues[i].vcc->qos.txtp.min_pcr + ,g_atm_dev.queues[i].vcc->qos.txtp.scr + ,g_atm_dev.queues[i].vcc->qos.txtp.mbs + ,g_atm_dev.queues[i].vcc->qos.txtp.cdv + ); + buf_off+=sprintf(buf+buf_off,"\tqos_rx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n" + ,g_atm_dev.queues[i].vcc->qos.rxtp.traffic_class + ,g_atm_dev.queues[i].vcc->qos.rxtp.max_pcr + ,g_atm_dev.queues[i].vcc->qos.rxtp.pcr + ,g_atm_dev.queues[i].vcc->qos.rxtp.min_pcr + ,g_atm_dev.queues[i].vcc->qos.rxtp.scr + ,g_atm_dev.queues[i].vcc->qos.rxtp.mbs + ,g_atm_dev.queues[i].vcc->qos.rxtp.cdv + ); + __amazon_atm_vcc_mib((i+CBM_RX_OFFSET),&mib_vcc); + buf_off+=sprintf(buf+buf_off,"\tCRC error=%u\n", mib_vcc.aal5VccCrcErrors); + buf_off+=sprintf(buf+buf_off,"\toversized packet=%u\n", mib_vcc.aal5VccOverSizedSDUs); +#ifdef AMAZON_ATM_DEBUG + if ( valid_qid(i+CBM_RX_OFFSET)){ + buf_off+=sprintf(buf+buf_off,"\tdownstream statics\n" ); + buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_PKT]); + buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_ERR] ); + buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_SW_DROP] ); + } + + buf_off+=sprintf(buf+buf_off,"\tupstream statics\n" ); + buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i].qs[QS_PKT]); + buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i].qs[QS_ERR] ); + buf_off+=sprintf(buf+buf_off,"\t\thw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_HW_DROP] ); + buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_SW_DROP] ); + +#endif + + } + + } + break; + default: + break; + } + if(buf_off>0) *eof = 1; + return buf_off; +} + +#ifdef AMAZON_TPE_AAL5_RECOVERY +extern int (*tpe_reset)(void); +extern int (*tpe_start)(void); +extern int (*tpe_inject)(void); +/* Brief: Reset TPE hardware + * Description + * This is a wordaround for AAL5 bug. It tries to reset TPE. + * take care of software + * setup all previous connection + */ +int amazon_tpe_reset(void) +{ + struct atm_vcc * vcc; + int err=0; + int i; + u8 * qd_addr; + u32 reg_l, reg_h; + unsigned int a_cfg_value=0; + unsigned int a_cfg_old_value=0; + atm_aal5_ifEntry_t mib_aal5; + atm_cell_ifEntry_t mib_cell; + + //make sure all cells transmitting out first + //Segmentation done + amazon_atm_aal5_mib(&mib_aal5); + reg_l = g_atm_dev.mib_counter.tx_cnt_l; + reg_h = g_atm_dev.mib_counter.tx_cnt_h; + while(1){ + mdelay(10); + amazon_atm_aal5_mib(&mib_aal5); + if( (reg_l == g_atm_dev.mib_counter.tx_cnt_l) && (reg_h == g_atm_dev.mib_counter.tx_cnt_h) ){ + break; + } + AMAZON_TPE_DMSG("AAL5 Segmentation still in progress!\n"); + reg_l = g_atm_dev.mib_counter.tx_cnt_l; + reg_h = g_atm_dev.mib_counter.tx_cnt_h; + } + //QSB done + qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); + for (i=1;i<15;i++){ + while ( (err=readl(qd_addr+i*CBM_QD_SIZE+0x8)&0xffff) !=0 ){ + mdelay(20); + AMAZON_TPE_DMSG("queue %u not empty (%u)\n",i,err); + } + } + //insurance for interfaces between Aware and CARB + mdelay(100); + amazon_atm_cell_mib(&mib_cell,0); + amazon_atm_cell_mib(&mib_cell,1); + amazon_atm_aal5_mib(&mib_aal5); + + mb(); + while ( (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) || (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) ){ + AMAZON_TPE_EMSG("\nwaiting for AWARE"); + AMAZON_TPE_EMSG(" BC0 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0)); + AMAZON_TPE_EMSG(" BC1 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC1)); + AMAZON_TPE_EMSG("\n"); + mdelay(1); + } + // disable AAI module + meiDebugRead(A_CFG_ADDR,&a_cfg_value,1); + a_cfg_old_value=a_cfg_value; + a_cfg_value &= (~(0x2800)); + meiDebugWrite(A_CFG_ADDR,&a_cfg_value,1); + //clear buffer + a_cfg_value = 0x1; + meiDebugWrite(AR_CB0_STATUS_ADDR,&a_cfg_value,1); + meiDebugWrite(AR_CB1_STATUS_ADDR,&a_cfg_value,1); + + if ( atm_init_hard(&g_atm_dev) != 0){ + return -EIO; + } + sema_init(&(g_atm_dev.swie.in_sem), 1); + //SWIE lock + clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock)); + //SWIE wait queue + init_waitqueue_head(&(g_atm_dev.swie.sleep)); + + for (i=CBM_DEFAULT_Q_OFFSET;iqos, i); + set_qd(vcc, i); + mb(); + err=set_htu(vcc,i); + if (err){ + AMAZON_TPE_EMSG("set htu entry fails %u\n",err); + } + } + } + meiDebugWrite(A_CFG_ADDR,&a_cfg_old_value,1); +#if 0 + //reset DFE + *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_DFE); + mb(); + *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~AMAZON_RST_REQ_DFE); + mb(); +#endif + + return 0; +} + +/* Brief: Send a ATM EoP packet to save DMA channel + */ +int amazon_tpe_inject_debug_cell(void) +{ + //Send a ATM cell to save DMA channel + u8 qid; + unsigned char atm_cell[48]; + qid = 0x11; + AMAZON_TPE_DMSG("qid = %d\n",qid); + memset(atm_cell,0,48); + atm_cell[3] = 0x2; + if ( amazon_atm_swin(qid,atm_cell)) { + AMAZON_TPE_EMSG("cannot insert EoP cell\n"); + return -1; + } + return 0; +} + +/* Brief: start HTU (TPE) + */ + +int amazon_tpe_start(void) +{ + AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR); + wmb(); + return 0; +} +#endif //AMAZON_TPE_AAL5_RECOVERY + +#ifdef AMAZON_CHECK_LINK +extern int (*adsl_link_notify)(int); +/* Brief: notify link status of ADSL link + * Parameters: 0 link down + * 1 link up + * Returns: 0 OK + * Details: called by MEI driver + * should update status and inform upper layer + */ +int amazon_tpe_link_notify(int status) +{ + adsl_link_status = status; + AMAZON_TPE_DMSG("link status %s\n",(status==1)?"Up":"Down"); + if (status == 0){ + //wait until no cells in upstream queues + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(2*HZ); + } + return 0; +} +#endif //ifdef AMAZON_CHECK_LINK + +/* + * Brief: Initialize ATM module + * + * Return Value: ENOMEM - No memory available + * EBUSY - Cannot register atm device + * ERESTARTSYS - Process interrupted by other signal + * 0 - OK, module initialized + * + * Description: + * This function registers an atm device for all UTOPIA devices. + * It also allocates memory for the private device data structures + */ +int __init amazon_atm_net_init(void) +{ + int i; + int err=0; + amazon_atm_dev_t *dev = NULL; + + if ((dev=amazon_atm_create()) != NULL){ + for(i=0;iports[i].enable){ + amazon_atm_devs[i] = NULL; + continue; + } + amazon_atm_devs[i] =atm_dev_register("amazon_atm",&amazon_atm_ops,-1,0UL); + if (amazon_atm_devs[i] == NULL){ + AMAZON_TPE_EMSG("atm_dev_register fails\n"); + err = -EIO; + goto amazon_atm_net_init_exit; + }else{ + AMAZON_TPE_DMSG("registering device %u\n",i); + amazon_atm_devs[i]->ci_range.vpi_bits = 8; + amazon_atm_devs[i]->ci_range.vci_bits = 16; + amazon_atm_devs[i]->link_rate = dev->ports[i].tx_max_cr; + amazon_atm_devs[i]->dev_data = (void *) i; + } + } + + }else{ + err = -ENOMEM; + AMAZON_TPE_EMSG("cannot init atm device\n"); + goto amazon_atm_net_init_exit; + } +#ifdef AMAZON_TPE_AAL5_RECOVERY + tpe_reset = & amazon_tpe_reset; + tpe_start = & amazon_tpe_start; + tpe_inject = & amazon_tpe_inject_debug_cell; +#endif //AMAZON_TPE_AAL5_RECOVERY +#ifdef AMAZON_CHECK_LINK + adsl_link_notify=amazon_tpe_link_notify; +#endif //AMAZON_CHECK_LINK +amazon_atm_net_init_exit: + return err; +} + +void __exit amazon_atm_net_cleanup(void) +{ + int i; + amazon_atm_cleanup(); + for(i=0;i