From 5c105d9f3fd086aff195d3849dcf847d6b0bd927 Mon Sep 17 00:00:00 2001 From: blogic Date: Fri, 5 Oct 2012 10:12:53 +0000 Subject: branch Attitude Adjustment git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/hostapd/Config.in | 47 +++ package/hostapd/Makefile | 339 +++++++++++++++++ package/hostapd/files/hostapd-full.config | 164 +++++++++ package/hostapd/files/hostapd-mini.config | 157 ++++++++ package/hostapd/files/hostapd.sh | 276 ++++++++++++++ package/hostapd/files/multicall.c | 28 ++ package/hostapd/files/wpa_supplicant-full.config | 408 +++++++++++++++++++++ package/hostapd/files/wpa_supplicant-mini.config | 406 ++++++++++++++++++++ package/hostapd/files/wpa_supplicant.sh | 196 ++++++++++ package/hostapd/files/wps-hotplug.sh | 6 + package/hostapd/patches/100-pending_work.patch | 123 +++++++ .../patches/300-nl80211_multicall_fixes.patch | 60 +++ .../hostapd/patches/310-multicall_bridge_fix.patch | 45 +++ .../hostapd/patches/320-madwifi_key_fixes.patch | 34 ++ package/hostapd/patches/400-noscan.patch | 32 ++ package/hostapd/patches/410-multicall.patch | 246 +++++++++++++ package/hostapd/patches/420-timestamp_check.patch | 12 + .../hostapd/patches/430-rescan_immediately.patch | 11 + package/hostapd/patches/440-optional_rfkill.patch | 261 +++++++++++++ .../hostapd/patches/450-reload_freq_change.patch | 23 ++ .../patches/451-nl80211_del_beacon_bss.patch | 63 ++++ .../hostapd/patches/452-ctrl_iface_reload.patch | 98 +++++ package/hostapd/patches/453-ap_sta_support.patch | 221 +++++++++++ .../patches/460-disable_ctrl_iface_mib.patch | 168 +++++++++ .../patches/470-wpa_ie_cap_workaround.patch | 56 +++ .../patches/480-terminate_on_setup_failure.patch | 81 ++++ .../patches/500-random_pool_add_kernel.patch | 168 +++++++++ .../hostapd/patches/510-bring_down_interface.patch | 19 + .../hostapd/patches/520-fix_wps_pin_crash.patch | 12 + .../patches/530-wps_single_auth_enc_type.patch | 25 ++ .../hostapd/patches/540-dynamic_20_40_mhz.patch | 202 ++++++++++ .../hostapd/patches/550-limit_debug_messages.patch | 213 +++++++++++ .../hostapd/patches/560-indicate-features.patch | 82 +++++ .../hostapd/patches/570-genl_connect_debug.patch | 11 + package/hostapd/patches/580-fix_bss_addr.patch | 11 + .../hostapd/patches/590-hostapd_cli_ifdef.patch | 50 +++ ...ant-add-new-config-params-to-be-used-with.patch | 211 +++++++++++ ...80211-use-new-parameters-during-ibss-join.patch | 59 +++ .../patches/604-wpa_s-support-htmode-param.patch | 156 ++++++++ .../hostapd/patches/610-max_num_sta_probe.patch | 13 + 40 files changed, 4793 insertions(+) create mode 100644 package/hostapd/Config.in create mode 100644 package/hostapd/Makefile create mode 100644 package/hostapd/files/hostapd-full.config create mode 100644 package/hostapd/files/hostapd-mini.config create mode 100644 package/hostapd/files/hostapd.sh create mode 100644 package/hostapd/files/multicall.c create mode 100644 package/hostapd/files/wpa_supplicant-full.config create mode 100644 package/hostapd/files/wpa_supplicant-mini.config create mode 100644 package/hostapd/files/wpa_supplicant.sh create mode 100644 package/hostapd/files/wps-hotplug.sh create mode 100644 package/hostapd/patches/100-pending_work.patch create mode 100644 package/hostapd/patches/300-nl80211_multicall_fixes.patch create mode 100644 package/hostapd/patches/310-multicall_bridge_fix.patch create mode 100644 package/hostapd/patches/320-madwifi_key_fixes.patch create mode 100644 package/hostapd/patches/400-noscan.patch create mode 100644 package/hostapd/patches/410-multicall.patch create mode 100644 package/hostapd/patches/420-timestamp_check.patch create mode 100644 package/hostapd/patches/430-rescan_immediately.patch create mode 100644 package/hostapd/patches/440-optional_rfkill.patch create mode 100644 package/hostapd/patches/450-reload_freq_change.patch create mode 100644 package/hostapd/patches/451-nl80211_del_beacon_bss.patch create mode 100644 package/hostapd/patches/452-ctrl_iface_reload.patch create mode 100644 package/hostapd/patches/453-ap_sta_support.patch create mode 100644 package/hostapd/patches/460-disable_ctrl_iface_mib.patch create mode 100644 package/hostapd/patches/470-wpa_ie_cap_workaround.patch create mode 100644 package/hostapd/patches/480-terminate_on_setup_failure.patch create mode 100644 package/hostapd/patches/500-random_pool_add_kernel.patch create mode 100644 package/hostapd/patches/510-bring_down_interface.patch create mode 100644 package/hostapd/patches/520-fix_wps_pin_crash.patch create mode 100644 package/hostapd/patches/530-wps_single_auth_enc_type.patch create mode 100644 package/hostapd/patches/540-dynamic_20_40_mhz.patch create mode 100644 package/hostapd/patches/550-limit_debug_messages.patch create mode 100644 package/hostapd/patches/560-indicate-features.patch create mode 100644 package/hostapd/patches/570-genl_connect_debug.patch create mode 100644 package/hostapd/patches/580-fix_bss_addr.patch create mode 100644 package/hostapd/patches/590-hostapd_cli_ifdef.patch create mode 100644 package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch create mode 100644 package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch create mode 100644 package/hostapd/patches/604-wpa_s-support-htmode-param.patch create mode 100644 package/hostapd/patches/610-max_num_sta_probe.patch (limited to 'package/hostapd') diff --git a/package/hostapd/Config.in b/package/hostapd/Config.in new file mode 100644 index 000000000..810c5a09a --- /dev/null +++ b/package/hostapd/Config.in @@ -0,0 +1,47 @@ +# wpa_supplicant config +config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK + bool "Disable timestamp check" + depends PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini + default n + help + This disables the timestamp check for certificates in wpa_supplicant + Useful for devices without RTC that cannot reliably get the real date/time + +choice + prompt "Choose TLS provider" + default WPA_SUPPLICANT_INTERNAL + depends PACKAGE_wpa-supplicant || PACKAGE_wpad + +config WPA_SUPPLICANT_INTERNAL + bool "internal" + +config WPA_SUPPLICANT_OPENSSL + bool "openssl" + select PACKAGE_libopenssl + +endchoice + +config WPA_RFKILL_SUPPORT + bool "Add rfkill support" + depends PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini + default n + +config WPA_MSG_MIN_PRIORITY + int "Minimum debug message priority" + default 3 + help + Useful values are: + 0 = all messages + 1 = raw message dumps + 2 = most debugging messages + 3 = info messages + 4 = warnings + 5 = errors + +config DRIVER_WEXT_SUPPORT + bool + default n + +config DRIVER_11N_SUPPORT + bool + default n diff --git a/package/hostapd/Makefile b/package/hostapd/Makefile new file mode 100644 index 000000000..5d279c51c --- /dev/null +++ b/package/hostapd/Makefile @@ -0,0 +1,339 @@ +# +# Copyright (C) 2006-2012 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk + +PKG_NAME:=hostapd +PKG_VERSION:=20120910 +PKG_RELEASE:=1 +PKG_REV:=762b99db7a76803d1ad274e87caa6fe870d47441 + +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 +PKG_SOURCE_URL:=git://w1.fi/srv/git/hostap.git +PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION) +PKG_SOURCE_VERSION:=$(PKG_REV) +PKG_SOURCE_PROTO:=git +PKG_MIRROR_MD5SUM:=fa3227c146cb50732fe8511ce6d1d862 + +PKG_BUILD_PARALLEL:=1 + +PKG_BUILD_DEPENDS:= \ + PACKAGE_kmod-madwifi:madwifi \ + +PKG_CONFIG_DEPENDS:= \ + CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK \ + CONFIG_PACKAGE_kmod-ath9k \ + CONFIG_PACKAGE_kmod-mac80211 \ + CONFIG_PACKAGE_kmod-madwifi \ + CONFIG_PACKAGE_hostapd \ + CONFIG_PACKAGE_hostapd-mini \ + CONFIG_PACKAGE_kmod-hostap \ + CONFIG_WPA_RFKILL_SUPPORT \ + CONFIG_DRIVER_WEXT_SUPPORT \ + CONFIG_DRIVER_11N_SUPPORT + +LOCAL_TYPE=$(strip \ + $(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \ + $(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \ + hostapd \ + ))) +LOCAL_VARIANT=$(patsubst wpad-%,%,$(patsubst supplicant-%,%,$(BUILD_VARIANT))) + +ifeq ($(LOCAL_TYPE),supplicant) + ifeq ($(LOCAL_VARIANT),full) + PKG_CONFIG_DEPENDS += \ + CONFIG_WPA_SUPPLICANT_INTERNAL \ + CONFIG_WPA_SUPPLICANT_OPENSSL + endif +endif + +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) + +include $(INCLUDE_DIR)/package.mk + +STAMP_CONFIGURED:=$(STAMP_CONFIGURED)_$(CONFIG_WPA_MSG_MIN_PRIORITY) + +ifneq ($(CONFIG_DRIVER_11N_SUPPORT),) + HOSTAPD_IEEE80211N:=y +endif + +DRIVER_MAKEOPTS= \ + CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-mac80211) \ + CONFIG_DRIVER_MADWIFI=$(CONFIG_PACKAGE_kmod-madwifi) \ + CONFIG_DRIVER_HOSTAP=$(CONFIG_PACKAGE_kmod-hostap) \ + CONFIG_IEEE80211N=$(HOSTAPD_IEEE80211N) \ + CONFIG_IEEE80211W=$(CONFIG_PACKAGE_kmod-ath9k) \ + CONFIG_DRIVER_WEXT=$(CONFIG_DRIVER_WEXT_SUPPORT) \ + $(if $(CONFIG_WPA_RFKILL_SUPPORT),NEED_RFKILL=y) + +ifneq ($(LOCAL_TYPE),hostapd) + ifdef CONFIG_WPA_SUPPLICANT_OPENSSL + ifeq ($(LOCAL_VARIANT),full) + DRIVER_MAKEOPTS += CONFIG_TLS=openssl + TARGET_LDFLAGS += -lcrypto -lssl + endif + endif + ifdef CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK + TARGET_CFLAGS += -DNO_TIMESTAMP_CHECK + endif + DRIVER_MAKEOPTS += \ + CONFIG_DRIVER_ROBOSWITCH=$(CONFIG_PACKAGE_kmod-switch) +endif + +DRV_DEPENDS:=+PACKAGE_kmod-mac80211:libnl-tiny @(!(TARGET_avr32||TARGET_etrax)||BROKEN) + +define Package/hostapd/Default + SECTION:=net + CATEGORY:=Network + TITLE:=IEEE 802.1x Authenticator + URL:=http://hostap.epitest.fi/ + DEPENDS:=$(DRV_DEPENDS) + MAINTAINER:=Felix Fietkau +endef + +define Package/hostapd +$(call Package/hostapd/Default) + TITLE+= (full) + VARIANT:=full +endef + +define Package/hostapd/description + This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS + Authenticator. +endef + +define Package/hostapd-mini +$(call Package/hostapd/Default) + TITLE+= (WPA-PSK only) + VARIANT:=mini +endef + +define Package/hostapd-mini/description + This package contains a minimal IEEE 802.1x/WPA Authenticator (WPA-PSK only). +endef + +define Package/hostapd-utils + $(call Package/hostapd/Default) + TITLE+= (utils) + DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini||PACKAGE_wpad||PACKAGE_wpad-mini +endef + +define Package/hostapd-utils/description + This package contains a command line utility to control the + IEEE 802.1x/WPA/EAP/RADIUS Authenticator. +endef + +define Package/wpad/Default + SECTION:=net + CATEGORY:=Network + TITLE:=IEEE 802.1x Authenticator/Supplicant + URL:=http://hostap.epitest.fi/ + MAINTAINER:=Felix Fietkau +endef + +define Package/wpad +$(call Package/wpad/Default) + TITLE+= (full) + DEPENDS:=$(DRV_DEPENDS) +WPA_SUPPLICANT_OPENSSL:libopenssl + VARIANT:=wpad-full +endef + +define Package/wpad/description + This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS + Authenticator and Supplicant +endef + +define Package/wpad-mini +$(call Package/wpad/Default) + TITLE+= (WPA-PSK only) + DEPENDS:=$(DRV_DEPENDS) + VARIANT:=wpad-mini +endef + +define Package/wpad-mini/description + This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only). +endef + +define Package/wpa-supplicant + SECTION:=net + CATEGORY:=Network + TITLE:=WPA Supplicant + URL:=http://hostap.epitest.fi/wpa_supplicant/ + DEPENDS:=$(DRV_DEPENDS) +WPA_SUPPLICANT_OPENSSL:libopenssl + VARIANT:=supplicant-full + MAINTAINER:=Felix Fietkau +endef + +define Package/wpa-supplicant/Description + WPA Supplicant +endef + +define Package/wpa-supplicant/config + source "$(SOURCE)/Config.in" +endef + +define Package/wpa-supplicant-mini + $(Package/wpa-supplicant) + TITLE:=WPA Supplicant (minimal version) + DEPENDS:=$(DRV_DEPENDS) + VARIANT:=supplicant-mini +endef + +define Package/wpa-supplicant-mini/Description + WPA Supplicant (minimal version) +endef + +define Package/wpa-cli + SECTION:=net + CATEGORY:=Network + DEPENDS:=@PACKAGE_wpa-supplicant||PACKAGE_wpad-mini||PACKAGE_wpad + TITLE:=WPA Supplicant command line interface + MAINTAINER:=Felix Fietkau +endef + +define Package/wpa-cli/Description + WPA Supplicant control utility +endef + + +ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED))) + define Build/Configure/rebuild + $(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.a | $(XARGS) rm -f + rm -f $(PKG_BUILD_DIR)/hostapd/hostapd + rm -f $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant + rm -f $(PKG_BUILD_DIR)/.config_* + touch $(subst .configured_,.config_,$(STAMP_CONFIGURED)) + endef +endif + +define Build/Configure + $(Build/Configure/rebuild) + $(CP) ./files/hostapd-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config + $(CP) ./files/wpa_supplicant-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config +endef + +TARGET_CPPFLAGS := \ + -I$(STAGING_DIR)/usr/include/libnl-tiny \ + -I$(PKG_BUILD_DIR)/src/crypto \ + $(TARGET_CPPFLAGS) \ + -I$(STAGING_DIR)/usr/include/madwifi \ + -DCONFIG_LIBNL20 \ + -D_GNU_SOURCE \ + $(if $(CONFIG_WPA_MSG_MIN_PRIORITY),-DCONFIG_MSG_MIN_PRIORITY=$(CONFIG_WPA_MSG_MIN_PRIORITY)) + +TARGET_CFLAGS += -ffunction-sections -fdata-sections +TARGET_LDFLAGS += -Wl,--gc-sections + +ifdef CONFIG_PACKAGE_kmod-mac80211 + TARGET_LDFLAGS += -lm -lnl-tiny +endif + +define Build/RunMake + CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \ + $(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR)/$(1) \ + $(TARGET_CONFIGURE_OPTS) \ + $(DRIVER_MAKEOPTS) \ + LIBS="$(TARGET_LDFLAGS)" \ + $(2) +endef + +define Build/Compile/wpad + echo ` \ + $(call Build/RunMake,hostapd,-s MULTICALL=1 dump_cflags); \ + $(call Build/RunMake,wpa_supplicant,-s MULTICALL=1 dump_cflags) | \ + sed -e 's,-n ,,g' -e 's,$(TARGET_CFLAGS),,' \ + ` > $(PKG_BUILD_DIR)/.cflags + +$(call Build/RunMake,hostapd, \ + CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \ + MULTICALL=1 \ + hostapd_cli hostapd_multi.a \ + ) + +$(call Build/RunMake,wpa_supplicant, \ + CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \ + MULTICALL=1 \ + wpa_cli wpa_supplicant_multi.a \ + ) + $(TARGET_CC) -o $(PKG_BUILD_DIR)/wpad \ + $(TARGET_CFLAGS) \ + ./files/multicall.c \ + $(PKG_BUILD_DIR)/hostapd/hostapd_multi.a \ + $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant_multi.a \ + $(TARGET_LDFLAGS) +endef + +define Build/Compile/hostapd + $(call Build/RunMake,hostapd, \ + hostapd hostapd_cli \ + ) +endef + +define Build/Compile/supplicant + $(call Build/RunMake,wpa_supplicant, \ + wpa_cli wpa_supplicant \ + ) +endef + +define Build/Compile + $(Build/Compile/$(LOCAL_TYPE)) +endef + +define Install/hostapd + $(INSTALL_DIR) $(1)/lib/wifi + $(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh + $(INSTALL_DIR) $(1)/usr/sbin +endef + +define Install/supplicant + $(INSTALL_DIR) $(1)/lib/wifi + $(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh + $(INSTALL_DIR) $(1)/usr/sbin +endef + +define Package/hostapd/install + $(call Install/hostapd,$(1)) + $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/ +endef +Package/hostapd-mini/install = $(Package/hostapd/install) + +ifneq ($(LOCAL_TYPE),supplicant) + define Package/hostapd-utils/install + $(INSTALL_DIR) $(1)/usr/sbin $(1)/etc/hotplug.d/button + $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/ + $(INSTALL_DATA) ./files/wps-hotplug.sh $(1)/etc/hotplug.d/button/50-wps + endef +endif + +define Package/wpad/install + $(call Install/hostapd,$(1)) + $(call Install/supplicant,$(1)) + $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/ + ln -sf wpad $(1)/usr/sbin/hostapd + ln -sf wpad $(1)/usr/sbin/wpa_supplicant +endef +Package/wpad-mini/install = $(Package/wpad/install) + +define Package/wpa-supplicant/install + $(call Install/supplicant,$(1)) + $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant $(1)/usr/sbin/ +endef +Package/wpa-supplicant-mini/install = $(Package/wpa-supplicant/install) + +ifneq ($(LOCAL_TYPE),hostapd) + define Package/wpa-cli/install + $(INSTALL_DIR) $(1)/usr/sbin + $(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/ + endef +endif + +$(eval $(call BuildPackage,hostapd)) +$(eval $(call BuildPackage,hostapd-mini)) +$(eval $(call BuildPackage,wpad)) +$(eval $(call BuildPackage,wpad-mini)) +$(eval $(call BuildPackage,wpa-supplicant)) +$(eval $(call BuildPackage,wpa-supplicant-mini)) +$(eval $(call BuildPackage,wpa-cli)) +$(eval $(call BuildPackage,hostapd-utils)) diff --git a/package/hostapd/files/hostapd-full.config b/package/hostapd/files/hostapd-full.config new file mode 100644 index 000000000..3a0ce12fc --- /dev/null +++ b/package/hostapd/files/hostapd-full.config @@ -0,0 +1,164 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticator +CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../../madwifi # change to the madwifi source directory + +# Driver interface for Prism54 driver +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y +# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be +# shipped with your distribution yet. If that is the case, you need to build +# newer libnl version and point the hostapd build to use it. +#LIBNL=/usr/src/libnl +#CFLAGS += -I$(LIBNL)/include +#LIBS += -L$(LIBNL)/lib + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for no driver (e.g., RADIUS server only) +#CONFIG_DRIVER_NONE=y + +# IEEE 802.11F/IAPP +CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +CONFIG_RSN_PREAUTH=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Integrated EAP server +CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP server +CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP server +CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP server +CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP server +CONFIG_EAP_PEAP=y + +# EAP-GTC for the integrated EAP server +CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP server +CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP server +#CONFIG_EAP_SIM=y + +# EAP-AKA for the integrated EAP server +#CONFIG_EAP_AKA=y + +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# EAP-PAX for the integrated EAP server +#CONFIG_EAP_PAX=y + +# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-SAKE for the integrated EAP server +#CONFIG_EAP_SAKE=y + +# EAP-GPSK for the integrated EAP server +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-FAST for the integrated EAP server +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y +# Enable UPnP support for external WPS Registrars +#CONFIG_WPS_UPNP=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to the integrated EAP +# server from external hosts using RADIUS. +#CONFIG_RADIUS_SERVER=y + +# Build IPv6 support for RADIUS operations +CONFIG_IPV6=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) +#CONFIG_DRIVER_RADIUS_ACL=y + +# IEEE 802.11n (High Throughput) support +CONFIG_IEEE80211N=y + +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably if debugging +# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove support for RADIUS accounting +#CONFIG_NO_ACCOUNTING=y + +# Remove support for RADIUS +#CONFIG_NO_RADIUS=y + +# Remove support for VLANs +#CONFIG_NO_VLAN=y + +CONFIG_TLS=internal +CONFIG_INTERNAL_LIBTOMMATH=y +CONFIG_INTERNAL_AES=y +NEED_AES_DEC=y + +CONFIG_NO_DUMP_STATE=y + +CONFIG_WPS=y +CONFIG_FULL_DYNAMIC_VLAN=y + diff --git a/package/hostapd/files/hostapd-mini.config b/package/hostapd/files/hostapd-mini.config new file mode 100644 index 000000000..3e94a645b --- /dev/null +++ b/package/hostapd/files/hostapd-mini.config @@ -0,0 +1,157 @@ +# Example hostapd build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for wired authenticator +CONFIG_DRIVER_WIRED=y + +# Driver interface for madwifi driver +CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../../madwifi # change to the madwifi source directory + +# Driver interface for Prism54 driver +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y +# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be +# shipped with your distribution yet. If that is the case, you need to build +# newer libnl version and point the hostapd build to use it. +#LIBNL=/usr/src/libnl +#CFLAGS += -I$(LIBNL)/include +#LIBS += -L$(LIBNL)/lib + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for no driver (e.g., RADIUS server only) +#CONFIG_DRIVER_NONE=y + +# IEEE 802.11F/IAPP +# CONFIG_IAPP=y + +# WPA2/IEEE 802.11i RSN pre-authentication +CONFIG_RSN_PREAUTH=y + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Integrated EAP server +#CONFIG_EAP=y + +# EAP-MD5 for the integrated EAP server +#CONFIG_EAP_MD5=y + +# EAP-TLS for the integrated EAP server +#CONFIG_EAP_TLS=y + +# EAP-MSCHAPv2 for the integrated EAP server +#CONFIG_EAP_MSCHAPV2=y + +# EAP-PEAP for the integrated EAP server +#CONFIG_EAP_PEAP=y + +# EAP-GTC for the integrated EAP server +#CONFIG_EAP_GTC=y + +# EAP-TTLS for the integrated EAP server +#CONFIG_EAP_TTLS=y + +# EAP-SIM for the integrated EAP server +#CONFIG_EAP_SIM=y + +# EAP-AKA for the integrated EAP server +#CONFIG_EAP_AKA=y + +# EAP-AKA' for the integrated EAP server +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# EAP-PAX for the integrated EAP server +#CONFIG_EAP_PAX=y + +# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-SAKE for the integrated EAP server +#CONFIG_EAP_SAKE=y + +# EAP-GPSK for the integrated EAP server +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-FAST for the integrated EAP server +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y +# Enable UPnP support for external WPS Registrars +#CONFIG_WPS_UPNP=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# Trusted Network Connect (EAP-TNC) +#CONFIG_EAP_TNC=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +#CONFIG_PKCS12=y + +# RADIUS authentication server. This provides access to the integrated EAP +# server from external hosts using RADIUS. +#CONFIG_RADIUS_SERVER=y + +# Build IPv6 support for RADIUS operations +#CONFIG_IPV6=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Use the hostapd's IEEE 802.11 authentication (ACL), but without +# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) +#CONFIG_DRIVER_RADIUS_ACL=y + +# IEEE 802.11n (High Throughput) support +CONFIG_IEEE80211N=y + +# Remove debugging code that is printing out debug messages to stdout. +# This can be used to reduce the size of the hostapd considerably if debugging +# code is not needed. +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove support for RADIUS accounting +CONFIG_NO_ACCOUNTING=y + +# Remove support for RADIUS +CONFIG_NO_RADIUS=y + +# Remove support for VLANs +#CONFIG_NO_VLAN=y + +CONFIG_TLS=internal + +CONFIG_NO_DUMP_STATE=y diff --git a/package/hostapd/files/hostapd.sh b/package/hostapd/files/hostapd.sh new file mode 100644 index 000000000..d60c26f3c --- /dev/null +++ b/package/hostapd/files/hostapd.sh @@ -0,0 +1,276 @@ +hostapd_set_bss_options() { + local var="$1" + local vif="$2" + local enc wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wps_possible + + config_get enc "$vif" encryption + config_get wep_rekey "$vif" wep_rekey # 300 + config_get wpa_group_rekey "$vif" wpa_group_rekey # 300 + config_get wpa_pair_rekey "$vif" wpa_pair_rekey # 300 + config_get wpa_master_rekey "$vif" wpa_master_rekey # 640 + config_get_bool ap_isolate "$vif" isolate 0 + config_get_bool disassoc_low_ack "$vif" disassoc_low_ack 1 + config_get max_num_sta "$vif" max_num_sta 0 + config_get max_inactivity "$vif" max_inactivity 0 + + config_get device "$vif" device + config_get hwmode "$device" hwmode + config_get phy "$device" phy + + append "$var" "ctrl_interface=/var/run/hostapd-$phy" "$N" + + if [ "$ap_isolate" -gt 0 ]; then + append "$var" "ap_isolate=$ap_isolate" "$N" + fi + if [ "$max_num_sta" -gt 0 ]; then + append "$var" "max_num_sta=$max_num_sta" "$N" + fi + if [ "$max_inactivity" -gt 0 ]; then + append "$var" "ap_max_inactivity=$max_inactivity" "$N" + fi + append "$var" "disassoc_low_ack=$disassoc_low_ack" "$N" + + # Examples: + # psk-mixed/tkip => WPA1+2 PSK, TKIP + # wpa-psk2/tkip+aes => WPA2 PSK, CCMP+TKIP + # wpa2/tkip+aes => WPA2 RADIUS, CCMP+TKIP + # ... + + # TODO: move this parsing function somewhere generic, so that + # later it can be reused by drivers that don't use hostapd + + # crypto defaults: WPA2 vs WPA1 + case "$enc" in + wpa2*|*psk2*) + wpa=2 + crypto="CCMP" + ;; + *mixed*) + wpa=3 + crypto="CCMP TKIP" + ;; + *) + wpa=1 + crypto="TKIP" + ;; + esac + + # explicit override for crypto setting + case "$enc" in + *tkip+aes|*tkip+ccmp|*aes+tkip|*ccmp+tkip) crypto="CCMP TKIP";; + *aes|*ccmp) crypto="CCMP";; + *tkip) crypto="TKIP";; + esac + + # enforce CCMP for 11ng and 11na + case "$hwmode:$crypto" in + *ng:TKIP|*na:TKIP) crypto="CCMP TKIP";; + esac + + # use crypto/auth settings for building the hostapd config + case "$enc" in + *psk*) + config_get psk "$vif" key + if [ ${#psk} -eq 64 ]; then + append "$var" "wpa_psk=$psk" "$N" + else + append "$var" "wpa_passphrase=$psk" "$N" + fi + wps_possible=1 + [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" + [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N" + [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N" + ;; + *wpa*) + # required fields? formats? + # hostapd is particular, maybe a default configuration for failures + config_get auth_server "$vif" auth_server + [ -z "$auth_server" ] && config_get auth_server "$vif" server + append "$var" "auth_server_addr=$auth_server" "$N" + config_get auth_port "$vif" auth_port + [ -z "$auth_port" ] && config_get auth_port "$vif" port + auth_port=${auth_port:-1812} + append "$var" "auth_server_port=$auth_port" "$N" + config_get auth_secret "$vif" auth_secret + [ -z "$auth_secret" ] && config_get auth_secret "$vif" key + append "$var" "auth_server_shared_secret=$auth_secret" "$N" + config_get_bool auth_cache "$vif" auth_cache 0 + [ "$auth_cache" -gt 0 ] || append "$var" "disable_pmksa_caching=1" "$N" + [ "$auth_cache" -gt 0 ] || append "$var" "okc=0" "$N" + config_get acct_server "$vif" acct_server + [ -n "$acct_server" ] && append "$var" "acct_server_addr=$acct_server" "$N" + config_get acct_port "$vif" acct_port + [ -n "$acct_port" ] && acct_port=${acct_port:-1813} + [ -n "$acct_port" ] && append "$var" "acct_server_port=$acct_port" "$N" + config_get acct_secret "$vif" acct_secret + [ -n "$acct_secret" ] && append "$var" "acct_server_shared_secret=$acct_secret" "$N" + config_get nasid "$vif" nasid + append "$var" "nas_identifier=$nasid" "$N" + append "$var" "eapol_key_index_workaround=1" "$N" + append "$var" "ieee8021x=1" "$N" + append "$var" "wpa_key_mgmt=WPA-EAP" "$N" + [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" + [ -n "$wpa_pair_rekey" ] && append "$var" "wpa_ptk_rekey=$wpa_pair_rekey" "$N" + [ -n "$wpa_master_rekey" ] && append "$var" "wpa_gmk_rekey=$wpa_master_rekey" "$N" + ;; + *wep*) + config_get key "$vif" key + key="${key:-1}" + case "$key" in + [1234]) + for idx in 1 2 3 4; do + local zidx + zidx=$(($idx - 1)) + config_get ckey "$vif" "key${idx}" + [ -n "$ckey" ] && \ + append "$var" "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N" + done + append "$var" "wep_default_key=$((key - 1))" "$N" + ;; + *) + append "$var" "wep_key0=$(prepare_key_wep "$key")" "$N" + append "$var" "wep_default_key=0" "$N" + [ -n "$wep_rekey" ] && append "$var" "wep_rekey_period=$wep_rekey" "$N" + ;; + esac + case "$enc" in + *shared*) + auth_algs=2 + ;; + *mixed*) + auth_algs=3 + ;; + esac + wpa=0 + crypto= + ;; + *) + wpa=0 + crypto= + ;; + esac + append "$var" "auth_algs=${auth_algs:-1}" "$N" + append "$var" "wpa=$wpa" "$N" + [ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N" + [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N" + + config_get ssid "$vif" ssid + config_get bridge "$vif" bridge + config_get ieee80211d "$vif" ieee80211d + config_get iapp_interface "$vif" iapp_interface + + config_get_bool wps_pbc "$vif" wps_pushbutton 0 + config_get_bool wps_label "$vif" wps_label 0 + + config_get config_methods "$vif" wps_config + [ "$wps_pbc" -gt 0 ] && append config_methods push_button + + [ -n "$wps_possible" -a -n "$config_methods" ] && { + config_get device_type "$vif" wps_device_type "6-0050F204-1" + config_get device_name "$vif" wps_device_name "OpenWrt AP" + config_get manufacturer "$vif" wps_manufacturer "openwrt.org" + + append "$var" "eap_server=1" "$N" + append "$var" "wps_state=2" "$N" + append "$var" "ap_setup_locked=1" "$N" + append "$var" "device_type=$device_type" "$N" + append "$var" "device_name=$device_name" "$N" + append "$var" "manufacturer=$manufacturer" "$N" + append "$var" "config_methods=$config_methods" "$N" + } + + append "$var" "ssid=$ssid" "$N" + [ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N" + [ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N" + [ -n "$iapp_interface" ] && append "$var" iapp_interface=$(uci_get_state network "$iapp_interface" ifname "$iapp_interface") "$N" + + if [ "$wpa" -ge "2" ] + then + # RSN -> allow preauthentication + config_get_bool rsn_preauth "$vif" rsn_preauth "$auth_cache" + if [ -n "$bridge" -a "$rsn_preauth" = 1 ] + then + append "$var" "rsn_preauth=1" "$N" + append "$var" "rsn_preauth_interfaces=$bridge" "$N" + fi + + # RSN -> allow management frame protection + config_get ieee80211w "$vif" ieee80211w + case "$ieee80211w" in + [012]) + append "$var" "ieee80211w=$ieee80211w" "$N" + [ "$ieee80211w" -gt "0" ] && { + config_get ieee80211w_max_timeout "$vif" ieee80211w_max_timeout + config_get ieee80211w_retry_timeout "$vif" ieee80211w_retry_timeout + [ -n "$ieee80211w_max_timeout" ] && \ + append "$var" "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N" + [ -n "$ieee80211w_retry_timeout" ] && \ + append "$var" "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N" + } + ;; + esac + fi +} + +hostapd_set_log_options() { + local var="$1" + local cfg="$2" + local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme + + config_get log_level "$cfg" log_level 2 + + config_get_bool log_80211 "$cfg" log_80211 1 + config_get_bool log_8021x "$cfg" log_8021x 1 + config_get_bool log_radius "$cfg" log_radius 1 + config_get_bool log_wpa "$cfg" log_wpa 1 + config_get_bool log_driver "$cfg" log_driver 1 + config_get_bool log_iapp "$cfg" log_iapp 1 + config_get_bool log_mlme "$cfg" log_mlme 1 + + local log_mask=$(( \ + ($log_80211 << 0) | \ + ($log_8021x << 1) | \ + ($log_radius << 2) | \ + ($log_wpa << 3) | \ + ($log_driver << 4) | \ + ($log_iapp << 5) | \ + ($log_mlme << 6) \ + )) + + append "$var" "logger_syslog=$log_mask" "$N" + append "$var" "logger_syslog_level=$log_level" "$N" + append "$var" "logger_stdout=$log_mask" "$N" + append "$var" "logger_stdout_level=$log_level" "$N" +} + +hostapd_setup_vif() { + local vif="$1" + local driver="$2" + local ifname device channel hwmode + + hostapd_cfg= + + config_get ifname "$vif" ifname + config_get device "$vif" device + config_get channel "$device" channel + config_get hwmode "$device" hwmode + + hostapd_set_log_options hostapd_cfg "$device" + hostapd_set_bss_options hostapd_cfg "$vif" + + case "$hwmode" in + *bg|*gdt|*gst|*fh) hwmode=g;; + *adt|*ast) hwmode=a;; + esac + [ "$channel" = auto ] && channel= + [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device" + cat > /var/run/hostapd-$ifname.conf < +#include +#include + +extern int hostapd_main(int argc, char **argv); +extern int wpa_supplicant_main(int argc, char **argv); + +int main(int argc, char **argv) +{ + bool restart = false; + const char *prog = argv[0]; + +restart: + if (strstr(argv[0], "hostapd")) + return hostapd_main(argc, argv); + else if (strstr(argv[0], "wpa_supplicant")) + return wpa_supplicant_main(argc, argv); + + if (!restart && argc > 1) { + argv++; + argc--; + restart = true; + goto restart; + } + + fprintf(stderr, "Invalid command.\nUsage: %s wpa_supplicant|hostapd []\n", prog); + return 255; +} diff --git a/package/hostapd/files/wpa_supplicant-full.config b/package/hostapd/files/wpa_supplicant-full.config new file mode 100644 index 000000000..f5abbad94 --- /dev/null +++ b/package/hostapd/files/wpa_supplicant-full.config @@ -0,0 +1,408 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + + +# Uncomment following two lines and fix the paths if you have installed OpenSSL +# or GnuTLS in non-default location +#CFLAGS += -I/usr/local/openssl/include +#LIBS += -L/usr/local/openssl/lib + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Example configuration for various cross-compilation platforms + +#### sveasoft (e.g., for Linksys WRT54G) ###################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS += -I../src/include -I../../src/router/openssl/include +#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl +############################################################################### + +#### openwrt (e.g., for Linksys WRT54G) ####################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ +# -I../WRT54GS/release/src/include +#LIBS = -lssl +############################################################################### + + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +# Change include directories to match with the local setup +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf +#CFLAGS += -I../../include/wireless + +# Driver interface for madwifi driver +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_MADWIFI=y +# Set include directory to the madwifi source tree +#CFLAGS += -I../../madwifi + +# Driver interface for ndiswrapper +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +# CONFIG_DRIVER_ATMEL=y + +# Driver interface for old Broadcom driver +# Please note that the newer Broadcom driver ("hybrid Linux driver") supports +# Linux wireless extensions and does not need (or even work) with the old +# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. +#CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +#CFLAGS += -I/opt/WRT54GS/release/src/include + +# Driver interface for Intel ipw2100/2200 driver +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_IPW=y + +# Driver interface for Ralink driver +#CONFIG_DRIVER_RALINK=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Include client MLME (management frame processing) for test driver +# This can be used to test MLME operations in hostapd with the test interface. +# space. +#CONFIG_CLIENT_MLME=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + +# Driver interface for no driver (e.g., WPS ER only) +#CONFIG_DRIVER_NONE=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-FAST +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +#CONFIG_USIM_SIMULATOR=y + +# EAP-SAKE +#CONFIG_EAP_SAKE=y + +# EAP-GPSK +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-TNC and related Trusted Network Connect support (experimental) +#CONFIG_EAP_TNC=y + +# Wi-Fi Protected Setup (WPS) +CONFIG_WPS=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# named_pipe = Windows Named Pipe (default for Windows) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to +# save about 1 kB in code size when building only WPA-Personal (no EAP support) +# or 6 kB if building for WPA-Enterprise. +#CONFIG_NO_WPA2=y + +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operatins system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +# eloop_none = Empty template +#CONFIG_ELOOP=eloop + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +#CONFIG_L2_PACKET=linux + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +CONFIG_IEEE80211W=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=internal + +# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. +# You need CONFIG_TLS=gnutls for this to have any effect. Please note that +# even though the core GnuTLS library is released under LGPL, this extra +# library uses GPL and as such, the terms of GPL apply to the combination +# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not +# apply for distribution of the resulting binary. +#CONFIG_GNUTLS_EXTRA=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for old DBus control interface +# (fi.epitest.hostap.WPASupplicant) +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for new DBus control interface +# (fi.w1.hostap.wpa_supplicant1) +#CONFIG_CTRL_IFACE_DBUS_NEW=y + +# Add introspection support for new DBus control interface +#CONFIG_CTRL_IFACE_DBUS_INTRO=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +#CONFIG_DEBUG_FILE=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +#CONFIG_DELAYED_MIC_ERROR_REPORT=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, comment out these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, comment out these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + +NEED_80211_COMMON=y + +CONFIG_IBSS_RSN=y diff --git a/package/hostapd/files/wpa_supplicant-mini.config b/package/hostapd/files/wpa_supplicant-mini.config new file mode 100644 index 000000000..772e1d980 --- /dev/null +++ b/package/hostapd/files/wpa_supplicant-mini.config @@ -0,0 +1,406 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + + +# Uncomment following two lines and fix the paths if you have installed OpenSSL +# or GnuTLS in non-default location +#CFLAGS += -I/usr/local/openssl/include +#LIBS += -L/usr/local/openssl/lib + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Example configuration for various cross-compilation platforms + +#### sveasoft (e.g., for Linksys WRT54G) ###################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS += -I../src/include -I../../src/router/openssl/include +#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl +############################################################################### + +#### openwrt (e.g., for Linksys WRT54G) ####################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ +# -I../WRT54GS/release/src/include +#LIBS = -lssl +############################################################################### + + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +# Change include directories to match with the local setup +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf +#CFLAGS += -I../../include/wireless + +# Driver interface for madwifi driver +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_MADWIFI=y +# Set include directory to the madwifi source tree +#CFLAGS += -I../../madwifi + +# Driver interface for ndiswrapper +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +# CONFIG_DRIVER_ATMEL=y + +# Driver interface for old Broadcom driver +# Please note that the newer Broadcom driver ("hybrid Linux driver") supports +# Linux wireless extensions and does not need (or even work) with the old +# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. +#CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +#CFLAGS += -I/opt/WRT54GS/release/src/include + +# Driver interface for Intel ipw2100/2200 driver +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_IPW=y + +# Driver interface for Ralink driver +#CONFIG_DRIVER_RALINK=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Include client MLME (management frame processing) for test driver +# This can be used to test MLME operations in hostapd with the test interface. +# space. +#CONFIG_CLIENT_MLME=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + +# Driver interface for no driver (e.g., WPS ER only) +#CONFIG_DRIVER_NONE=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +# CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +# CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +# CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +# CONFIG_EAP_TLS=y + +# EAL-PEAP +# CONFIG_EAP_PEAP=y + +# EAP-TTLS +# CONFIG_EAP_TTLS=y + +# EAP-FAST +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# EAP-GTC +# CONFIG_EAP_GTC=y + +# EAP-OTP +# CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +# CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +#CONFIG_USIM_SIMULATOR=y + +# EAP-SAKE +#CONFIG_EAP_SAKE=y + +# EAP-GPSK +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-TNC and related Trusted Network Connect support (experimental) +#CONFIG_EAP_TNC=y + +# Wi-Fi Protected Setup (WPS) +#CONFIG_WPS=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +# CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +# CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# named_pipe = Windows Named Pipe (default for Windows) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to +# save about 1 kB in code size when building only WPA-Personal (no EAP support) +# or 6 kB if building for WPA-Enterprise. +#CONFIG_NO_WPA2=y + +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operatins system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +# eloop_none = Empty template +#CONFIG_ELOOP=eloop + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +#CONFIG_L2_PACKET=linux + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +# CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=internal + +# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. +# You need CONFIG_TLS=gnutls for this to have any effect. Please note that +# even though the core GnuTLS library is released under LGPL, this extra +# library uses GPL and as such, the terms of GPL apply to the combination +# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not +# apply for distribution of the resulting binary. +#CONFIG_GNUTLS_EXTRA=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +#CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for old DBus control interface +# (fi.epitest.hostap.WPASupplicant) +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for new DBus control interface +# (fi.w1.hostap.wpa_supplicant1) +#CONFIG_CTRL_IFACE_DBUS_NEW=y + +# Add introspection support for new DBus control interface +#CONFIG_CTRL_IFACE_DBUS_INTRO=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +#CONFIG_DEBUG_FILE=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +#CONFIG_DELAYED_MIC_ERROR_REPORT=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, comment out these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, comment out these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + +NEED_80211_COMMON=y diff --git a/package/hostapd/files/wpa_supplicant.sh b/package/hostapd/files/wpa_supplicant.sh new file mode 100644 index 000000000..5c4bd93d0 --- /dev/null +++ b/package/hostapd/files/wpa_supplicant.sh @@ -0,0 +1,196 @@ +wpa_supplicant_setup_vif() { + local vif="$1" + local driver="$2" + local key="$key" + local options="$3" + local freq="" + local ht="$5" + local ap_scan="" + local scan_ssid="1" + [ -n "$4" ] && freq="frequency=$4" + + # make sure we have the encryption type and the psk + [ -n "$enc" ] || { + config_get enc "$vif" encryption + } + [ -n "$key" ] || { + config_get key "$vif" key + } + + local net_cfg bridge + config_get bridge "$vif" bridge + [ -z "$bridge" ] && { + net_cfg="$(find_net_config "$vif")" + [ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")" + config_set "$vif" bridge "$bridge" + } + + local mode ifname wds modestr="" + config_get mode "$vif" mode + config_get ifname "$vif" ifname + config_get_bool wds "$vif" wds 0 + [ -z "$bridge" ] || [ "$mode" = ap ] || [ "$mode" = sta -a $wds -eq 1 ] || { + echo "wpa_supplicant_setup_vif($ifname): Refusing to bridge $mode mode interface" + return 1 + } + [ "$mode" = "adhoc" ] && { + modestr="mode=1" + scan_ssid="0" + ap_scan="ap_scan=2" + } + + key_mgmt='NONE' + case "$enc" in + *none*) ;; + *wep*) + config_get key "$vif" key + key="${key:-1}" + case "$key" in + [1234]) + for idx in 1 2 3 4; do + local zidx + zidx=$(($idx - 1)) + config_get ckey "$vif" "key${idx}" + [ -n "$ckey" ] && \ + append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")" + done + wep_tx_keyidx="wep_tx_keyidx=$((key - 1))" + ;; + *) + wep_key0="wep_key0=$(prepare_key_wep "$key")" + wep_tx_keyidx="wep_tx_keyidx=0" + ;; + esac + ;; + *psk*) + key_mgmt='WPA-PSK' + # if you want to use PSK with a non-nl80211 driver you + # have to use WPA-NONE and wext driver for wpa_s + [ "$mode" = "adhoc" -a "$driver" != "nl80211" ] && { + key_mgmt='WPA-NONE' + driver='wext' + } + if [ ${#key} -eq 64 ]; then + passphrase="psk=${key}" + else + passphrase="psk=\"${key}\"" + fi + case "$enc" in + *psk2*) + proto='proto=RSN' + config_get ieee80211w "$vif" ieee80211w + ;; + *psk*) + proto='proto=WPA' + ;; + esac + ;; + *wpa*|*8021x*) + proto='proto=WPA2' + key_mgmt='WPA-EAP' + config_get ieee80211w "$vif" ieee80211w + config_get ca_cert "$vif" ca_cert + config_get eap_type "$vif" eap_type + ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""} + case "$eap_type" in + tls) + pairwise='pairwise=CCMP' + group='group=CCMP' + config_get identity "$vif" identity + config_get client_cert "$vif" client_cert + config_get priv_key "$vif" priv_key + config_get priv_key_pwd "$vif" priv_key_pwd + identity="identity=\"$identity\"" + client_cert="client_cert=\"$client_cert\"" + priv_key="private_key=\"$priv_key\"" + priv_key_pwd="private_key_passwd=\"$priv_key_pwd\"" + ;; + peap|ttls) + config_get auth "$vif" auth + config_get identity "$vif" identity + config_get password "$vif" password + phase2="phase2=\"auth=${auth:-MSCHAPV2}\"" + identity="identity=\"$identity\"" + password="password=\"$password\"" + ;; + esac + eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')" + ;; + esac + + case "$ieee80211w" in + [012]) + ieee80211w="ieee80211w=$ieee80211w" + ;; + esac + + local fixed_freq bssid1 beacon_interval brates mrate + config_get ifname "$vif" ifname + config_get bridge "$vif" bridge + config_get ssid "$vif" ssid + config_get bssid "$vif" bssid + bssid1=${bssid:+"bssid=$bssid"} + beacon_interval=${beacon_int:+"beacon_interval=$beacon_int"} + + local br brval brsub brstr + [ -n "$basic_rate_list" ] && { + for br in $basic_rate_list; do + brval="$(($br / 1000))" + brsub="$((($br / 100) % 10))" + [ "$brsub" -gt 0 ] && brval="$brval.$brsub" + [ -n "$brstr" ] && brstr="$brstr," + brstr="$brstr$brval" + done + brates=${basic_rate_list:+"rates=$brstr"} + } + + local mcval="" + [ -n "$mcast_rate" ] && { + mcval="$(($mcast_rate / 1000))" + mcsub="$(( ($mcast_rate / 100) % 10 ))" + [ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub" + mrate=${mcast_rate:+"mcast_rate=$mcval"} + } + + local ht_str + [ -n "$ht" ] && ht_str="htmode=$ht" + + rm -rf /var/run/wpa_supplicant-$ifname + cat > /var/run/wpa_supplicant-$ifname.conf <da, HOSTAPD_MODULE_IEEE80211, +- HOSTAPD_LEVEL_DEBUG, +- "did not acknowledge association response"); +- return; +- } +- + if (len < IEEE80211_HDRLEN + (reassoc ? sizeof(mgmt->u.reassoc_resp) : + sizeof(mgmt->u.assoc_resp))) { + printf("handle_assoc_cb(reassoc=%d) - too short payload " +@@ -1520,11 +1513,6 @@ static void handle_assoc_cb(struct hosta + return; + } + +- if (reassoc) +- status = le_to_host16(mgmt->u.reassoc_resp.status_code); +- else +- status = le_to_host16(mgmt->u.assoc_resp.status_code); +- + sta = ap_get_sta(hapd, mgmt->da); + if (!sta) { + printf("handle_assoc_cb: STA " MACSTR " not found\n", +@@ -1532,6 +1520,19 @@ static void handle_assoc_cb(struct hosta + return; + } + ++ if (!ok) { ++ hostapd_logger(hapd, mgmt->da, HOSTAPD_MODULE_IEEE80211, ++ HOSTAPD_LEVEL_DEBUG, ++ "did not acknowledge association response"); ++ sta->flags &= ~WLAN_STA_ASSOC_REQ_OK; ++ return; ++ } ++ ++ if (reassoc) ++ status = le_to_host16(mgmt->u.reassoc_resp.status_code); ++ else ++ status = le_to_host16(mgmt->u.assoc_resp.status_code); ++ + if (status != WLAN_STATUS_SUCCESS) + goto fail; + +@@ -1830,6 +1831,9 @@ void ieee802_11_rx_from_unknown(struct h + + sta = ap_get_sta(hapd, src); + if (sta && (sta->flags & WLAN_STA_ASSOC)) { ++ if (!hapd->conf->wds_sta) ++ return; ++ + if (wds && !(sta->flags & WLAN_STA_WDS)) { + wpa_printf(MSG_DEBUG, "Enable 4-address WDS mode for " + "STA " MACSTR " (aid %u)", +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -2661,10 +2661,10 @@ static int wpa_driver_nl80211_capa(struc + drv->data_tx_status = info.data_tx_status; + + /* +- * If poll command is supported mac80211 is new enough to +- * have everything we need to not need monitor interfaces. ++ * If poll command and tx status are supported, mac80211 is new enough ++ * to have everything we need to not need monitor interfaces. + */ +- drv->use_monitor = !info.poll_command_supported; ++ drv->use_monitor = !info.poll_command_supported || !info.data_tx_status; + + if (drv->device_ap_sme && drv->use_monitor) { + /* +@@ -6392,8 +6392,8 @@ static int wpa_driver_nl80211_hapd_send_ + pos = (u8 *) (hdr + 1); + + if (qos) { +- /* add an empty QoS header if needed */ +- pos[0] = 0; ++ /* Set highest priority in QoS header */ ++ pos[0] = 7; + pos[1] = 0; + pos += 2; + } +@@ -7698,6 +7698,10 @@ static int i802_set_wds_sta(void *priv, + } + return i802_set_sta_vlan(priv, addr, name, 0); + } else { ++ if (bridge_ifname) ++ linux_br_del_if(drv->global->ioctl_sock, bridge_ifname, ++ name); ++ + i802_set_sta_vlan(priv, addr, bss->ifname, 0); + return wpa_driver_nl80211_if_remove(priv, WPA_IF_AP_VLAN, + name); +@@ -8065,7 +8069,12 @@ static int wpa_driver_nl80211_if_remove( + if (ifindex <= 0) + return -1; + ++ nl80211_remove_iface(drv, ifindex); ++ + #ifdef HOSTAPD ++ if (type != WPA_IF_AP_BSS) ++ return 0; ++ + if (bss->added_if_into_bridge) { + if (linux_br_del_if(drv->global->ioctl_sock, bss->brname, + bss->ifname) < 0) +@@ -8079,13 +8088,6 @@ static int wpa_driver_nl80211_if_remove( + "bridge %s: %s", + bss->brname, strerror(errno)); + } +-#endif /* HOSTAPD */ +- +- nl80211_remove_iface(drv, ifindex); +- +-#ifdef HOSTAPD +- if (type != WPA_IF_AP_BSS) +- return 0; + + if (bss != &drv->first_bss) { + struct i802_bss *tbss; diff --git a/package/hostapd/patches/300-nl80211_multicall_fixes.patch b/package/hostapd/patches/300-nl80211_multicall_fixes.patch new file mode 100644 index 000000000..1d2519a93 --- /dev/null +++ b/package/hostapd/patches/300-nl80211_multicall_fixes.patch @@ -0,0 +1,60 @@ +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -2988,6 +2988,7 @@ static void * wpa_driver_nl80211_init(vo + drv->monitor_sock = -1; + drv->eapol_tx_sock = -1; + drv->ap_scan_as_station = NL80211_IFTYPE_UNSPECIFIED; ++ drv->nlmode = NL80211_IFTYPE_STATION; + + if (wpa_driver_nl80211_init_nl(drv)) { + os_free(drv); +@@ -3302,17 +3303,12 @@ static void wpa_driver_nl80211_send_rfki + wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL); + } + +- + static int +-wpa_driver_nl80211_finish_drv_init(struct wpa_driver_nl80211_data *drv) ++wpa_driver_nl80211_finish_drv_init_sta(struct wpa_driver_nl80211_data *drv, ++ int *send_rfkill_event) + { + struct i802_bss *bss = &drv->first_bss; +- int send_rfkill_event = 0; + +- drv->ifindex = if_nametoindex(bss->ifname); +- drv->first_bss.ifindex = drv->ifindex; +- +-#ifndef HOSTAPD + /* + * Make sure the interface starts up in station mode unless this is a + * dynamically added interface (e.g., P2P) that was already configured +@@ -3331,7 +3327,7 @@ wpa_driver_nl80211_finish_drv_init(struc + "interface '%s' due to rfkill", + bss->ifname); + drv->if_disabled = 1; +- send_rfkill_event = 1; ++ *send_rfkill_event = 1; + } else { + wpa_printf(MSG_ERROR, "nl80211: Could not set " + "interface '%s' UP", bss->ifname); +@@ -3341,7 +3337,19 @@ wpa_driver_nl80211_finish_drv_init(struc + + netlink_send_oper_ifla(drv->global->netlink, drv->ifindex, + 1, IF_OPER_DORMANT); +-#endif /* HOSTAPD */ ++} ++ ++static int ++wpa_driver_nl80211_finish_drv_init(struct wpa_driver_nl80211_data *drv) ++{ ++ struct i802_bss *bss = &drv->first_bss; ++ int send_rfkill_event = 0; ++ ++ drv->ifindex = if_nametoindex(bss->ifname); ++ drv->first_bss.ifindex = drv->ifindex; ++ ++ if (drv->nlmode == NL80211_IFTYPE_STATION) ++ wpa_driver_nl80211_finish_drv_init_sta(drv, &send_rfkill_event); + + if (wpa_driver_nl80211_capa(drv)) + return -1; diff --git a/package/hostapd/patches/310-multicall_bridge_fix.patch b/package/hostapd/patches/310-multicall_bridge_fix.patch new file mode 100644 index 000000000..59bfe5177 --- /dev/null +++ b/package/hostapd/patches/310-multicall_bridge_fix.patch @@ -0,0 +1,45 @@ +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -893,6 +893,10 @@ static void wpa_driver_nl80211_event_rtm + return; + } + ++ if (ifi->ifi_family == AF_BRIDGE && ++ drv->nlmode != NL80211_IFTYPE_AP) ++ return; ++ + wpa_printf(MSG_DEBUG, "RTM_NEWLINK: operstate=%d ifi_flags=0x%x " + "(%s%s%s%s)", + drv->operstate, ifi->ifi_flags, +@@ -1000,6 +1004,10 @@ static void wpa_driver_nl80211_event_rtm + attrlen = len; + attr = (struct rtattr *) buf; + ++ if (ifi->ifi_family == AF_BRIDGE && ++ drv->nlmode != NL80211_IFTYPE_AP) ++ return; ++ + rta_len = RTA_ALIGN(sizeof(struct rtattr)); + while (RTA_OK(attr, attrlen)) { + if (attr->rta_type == IFLA_IFNAME) { +@@ -2990,6 +2998,11 @@ static void * wpa_driver_nl80211_init(vo + drv->ap_scan_as_station = NL80211_IFTYPE_UNSPECIFIED; + drv->nlmode = NL80211_IFTYPE_STATION; + ++#ifdef HOSTAPD ++ drv->num_if_indices = sizeof(drv->default_if_indices) / sizeof(int); ++ drv->if_indices = drv->default_if_indices; ++#endif ++ + if (wpa_driver_nl80211_init_nl(drv)) { + os_free(drv); + return NULL; +@@ -7819,8 +7832,6 @@ static void *i802_init(struct hostapd_da + br_ifindex = 0; + } + +- drv->num_if_indices = sizeof(drv->default_if_indices) / sizeof(int); +- drv->if_indices = drv->default_if_indices; + for (i = 0; i < params->num_bridge; i++) { + if (params->bridge[i]) { + ifindex = if_nametoindex(params->bridge[i]); diff --git a/package/hostapd/patches/320-madwifi_key_fixes.patch b/package/hostapd/patches/320-madwifi_key_fixes.patch new file mode 100644 index 000000000..45a7ac6c8 --- /dev/null +++ b/package/hostapd/patches/320-madwifi_key_fixes.patch @@ -0,0 +1,34 @@ +--- a/src/drivers/driver_madwifi.c ++++ b/src/drivers/driver_madwifi.c +@@ -453,7 +453,9 @@ wpa_driver_madwifi_set_key(const char *i + + memset(&wk, 0, sizeof(wk)); + wk.ik_type = cipher; +- wk.ik_flags = IEEE80211_KEY_RECV | IEEE80211_KEY_XMIT; ++ wk.ik_flags = IEEE80211_KEY_RECV; ++ if (set_tx) ++ wk.ik_flags |= IEEE80211_KEY_XMIT; + if (addr == NULL || is_broadcast_ether_addr(addr)) { + memset(wk.ik_macaddr, 0xff, IEEE80211_ADDR_LEN); + wk.ik_keyix = key_idx; +@@ -465,6 +467,20 @@ wpa_driver_madwifi_set_key(const char *i + wk.ik_keylen = key_len; + memcpy(wk.ik_keydata, key, key_len); + ++#ifdef WORDS_BIGENDIAN ++#define WPA_KEY_RSC_LEN 8 ++ { ++ size_t i; ++ u8 tmp[WPA_KEY_RSC_LEN]; ++ os_memset(tmp, 0, sizeof(tmp)); ++ for (i = 0; i < seq_len; i++) ++ tmp[WPA_KEY_RSC_LEN - i - 1] = seq[i]; ++ os_memcpy(&wk.ik_keyrsc, tmp, WPA_KEY_RSC_LEN); ++ } ++#else /* WORDS_BIGENDIAN */ ++ os_memcpy(&wk.ik_keyrsc, seq, seq_len); ++#endif /* WORDS_BIGENDIAN */ ++ + ret = set80211priv(drv, IEEE80211_IOCTL_SETKEY, &wk, sizeof(wk)); + if (ret < 0) { + wpa_printf(MSG_DEBUG, "%s: Failed to set key (addr %s" diff --git a/package/hostapd/patches/400-noscan.patch b/package/hostapd/patches/400-noscan.patch new file mode 100644 index 000000000..69d026b3d --- /dev/null +++ b/package/hostapd/patches/400-noscan.patch @@ -0,0 +1,32 @@ +--- a/hostapd/config_file.c ++++ b/hostapd/config_file.c +@@ -2485,6 +2485,8 @@ static int hostapd_config_fill(struct ho + } + #endif /* CONFIG_IEEE80211W */ + #ifdef CONFIG_IEEE80211N ++ } else if (os_strcmp(buf, "noscan") == 0) { ++ conf->noscan = atoi(pos); + } else if (os_strcmp(buf, "ieee80211n") == 0) { + conf->ieee80211n = atoi(pos); + } else if (os_strcmp(buf, "ht_capab") == 0) { +--- a/src/ap/ap_config.h ++++ b/src/ap/ap_config.h +@@ -497,6 +497,7 @@ struct hostapd_config { + + int ht_op_mode_fixed; + u16 ht_capab; ++ int noscan; + int ieee80211n; + int secondary_channel; + int require_ht; +--- a/src/ap/hw_features.c ++++ b/src/ap/hw_features.c +@@ -493,7 +493,7 @@ static int ieee80211n_check_40mhz(struct + { + struct wpa_driver_scan_params params; + +- if (!iface->conf->secondary_channel) ++ if (!iface->conf->secondary_channel || iface->conf->noscan) + return 0; /* HT40 not used */ + + wpa_printf(MSG_DEBUG, "Scan for neighboring BSSes prior to enabling " diff --git a/package/hostapd/patches/410-multicall.patch b/package/hostapd/patches/410-multicall.patch new file mode 100644 index 000000000..7900428ae --- /dev/null +++ b/package/hostapd/patches/410-multicall.patch @@ -0,0 +1,246 @@ +--- a/hostapd/Makefile ++++ b/hostapd/Makefile +@@ -14,6 +14,7 @@ CFLAGS += -I../src/utils + # CFLAGS += -DUSE_KERNEL_HEADERS -I/usr/src/linux/include + + -include .config ++-include $(if $(MULTICALL), ../wpa_supplicant/.config) + + ifndef CONFIG_OS + ifdef CONFIG_NATIVE_WINDOWS +@@ -188,10 +189,14 @@ ifdef CONFIG_IEEE80211AC + CFLAGS += -DCONFIG_IEEE80211AC + endif + ++ifndef MULTICALL ++CFLAGS += -DNO_SUPPLICANT ++endif ++ + include ../src/drivers/drivers.mak +-OBJS += $(DRV_AP_OBJS) +-CFLAGS += $(DRV_AP_CFLAGS) +-LDFLAGS += $(DRV_AP_LDFLAGS) ++OBJS += $(sort $(DRV_AP_OBJS) $(if $(MULTICALL),$(DRV_WPA_OBJS))) ++CFLAGS += $(DRV_AP_CFLAGS) $(if $(MULTICALL),$(DRV_WPA_CFLAGS)) ++LDFLAGS += $(DRV_AP_LDFLAGS) $(if $(MULTICALL),$(DRV_WPA_LDFLAGS)) + LIBS += $(DRV_AP_LIBS) + + ifdef CONFIG_L2_PACKET +@@ -867,6 +872,12 @@ install: all + + BCHECK=../src/drivers/build.hostapd + ++hostapd_multi.a: $(BCHECK) $(OBJS) ++ $(Q)$(CC) -c -o hostapd_multi.o -Dmain=hostapd_main $(CFLAGS) main.c ++ @$(E) " CC " $< ++ @rm -f $@ ++ @$(AR) cr $@ hostapd_multi.o $(OBJS) ++ + hostapd: $(BCHECK) $(OBJS) + $(Q)$(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS) + @$(E) " LD " $@ +@@ -905,6 +916,12 @@ HOBJS += ../src/crypto/aes-internal.o + HOBJS += ../src/crypto/aes-internal-enc.o + endif + ++dump_cflags: ++ @echo -n $(CFLAGS) " " ++ ++dump_ldflags: ++ @echo -n $(LDFLAGS) $(LIBS) $(EXTRALIBS) " " ++ + nt_password_hash: $(NOBJS) + $(Q)$(CC) $(LDFLAGS) -o nt_password_hash $(NOBJS) $(LIBS_n) + @$(E) " LD " $@ +--- a/wpa_supplicant/Makefile ++++ b/wpa_supplicant/Makefile +@@ -14,6 +14,7 @@ CFLAGS += -I../src + CFLAGS += -I../src/utils + + -include .config ++-include $(if $(MULTICALL),../hostapd/.config) + + BINALL=wpa_supplicant wpa_cli + +@@ -705,6 +706,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS + CFLAGS += -DCONFIG_DYNAMIC_EAP_METHODS + LIBS += -ldl -rdynamic + endif ++else ++ ifdef MULTICALL ++ OBJS += ../src/eap_common/eap_common.o ++ endif + endif + + ifdef CONFIG_AP +@@ -713,9 +718,11 @@ NEED_EAP_COMMON=y + NEED_RSN_AUTHENTICATOR=y + CFLAGS += -DCONFIG_AP + OBJS += ap.o ++ifndef MULTICALL + CFLAGS += -DCONFIG_NO_RADIUS + CFLAGS += -DCONFIG_NO_ACCOUNTING + CFLAGS += -DCONFIG_NO_VLAN ++endif + OBJS += ../src/ap/hostapd.o + OBJS += ../src/ap/wpa_auth_glue.o + OBJS += ../src/ap/utils.o +@@ -770,10 +777,18 @@ endif + ifdef CONFIG_HS20 + OBJS += ../src/ap/hs20.o + endif ++else ++ ifdef MULTICALL ++ OBJS += ../src/eap_server/eap_server.o ++ OBJS += ../src/eap_server/eap_server_identity.o ++ OBJS += ../src/eap_server/eap_server_methods.o ++ endif + endif + + ifdef NEED_RSN_AUTHENTICATOR ++ifndef MULTICALL + CFLAGS += -DCONFIG_NO_RADIUS ++endif + NEED_AES_WRAP=y + OBJS += ../src/ap/wpa_auth.o + OBJS += ../src/ap/wpa_auth_ie.o +@@ -1515,6 +1530,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv) + + $(OBJS_c) $(OBJS_t) $(OBJS_t2) $(OBJS) $(BCHECK) $(EXTRA_progs): .config + ++wpa_supplicant_multi.a: .config $(BCHECK) $(OBJS) $(EXTRA_progs) ++ $(Q)$(CC) -c -o wpa_supplicant_multi.o -Dmain=wpa_supplicant_main $(CFLAGS) main.c ++ @$(E) " CC " $< ++ @rm -f $@ ++ @$(AR) cr $@ wpa_supplicant_multi.o $(OBJS) ++ + wpa_supplicant: $(BCHECK) $(OBJS) $(EXTRA_progs) + $(Q)$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS) + @$(E) " LD " $@ +@@ -1585,6 +1606,12 @@ eap_ikev2.so: ../src/eap_peer/eap_ikev2. + %@.service: %.service.arg.in + sed -e 's|\@BINDIR\@|$(BINDIR)|g' $< >$@ + ++dump_cflags: ++ @echo -n $(CFLAGS) " " ++ ++dump_ldflags: ++ @echo -n $(LDFLAGS) $(LIBS) $(EXTRALIBS) " " ++ + wpa_supplicant.exe: wpa_supplicant + mv -f $< $@ + wpa_cli.exe: wpa_cli +--- a/src/drivers/driver.h ++++ b/src/drivers/driver.h +@@ -3686,8 +3686,8 @@ union wpa_event_data { + * Driver wrapper code should call this function whenever an event is received + * from the driver. + */ +-void wpa_supplicant_event(void *ctx, enum wpa_event_type event, +- union wpa_event_data *data); ++extern void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event, ++ union wpa_event_data *data); + + + /* +--- a/src/ap/drv_callbacks.c ++++ b/src/ap/drv_callbacks.c +@@ -685,8 +685,8 @@ static void hostapd_event_eapol_rx(struc + } + + +-void wpa_supplicant_event(void *ctx, enum wpa_event_type event, +- union wpa_event_data *data) ++void hostapd_wpa_event(void *ctx, enum wpa_event_type event, ++ union wpa_event_data *data) + { + struct hostapd_data *hapd = ctx; + #ifndef CONFIG_NO_STDOUT_DEBUG +--- a/wpa_supplicant/wpa_priv.c ++++ b/wpa_supplicant/wpa_priv.c +@@ -819,8 +819,8 @@ static void wpa_priv_send_ft_response(st + } + + +-void wpa_supplicant_event(void *ctx, enum wpa_event_type event, +- union wpa_event_data *data) ++static void supplicant_event(void *ctx, enum wpa_event_type event, ++ union wpa_event_data *data) + { + struct wpa_priv_interface *iface = ctx; + +@@ -962,6 +962,7 @@ int main(int argc, char *argv[]) + if (os_program_init()) + return -1; + ++ wpa_supplicant_event = supplicant_event; + wpa_priv_fd_workaround(); + + for (;;) { +--- a/wpa_supplicant/events.c ++++ b/wpa_supplicant/events.c +@@ -2258,8 +2258,8 @@ static void wnm_action_rx(struct wpa_sup + } + + +-void wpa_supplicant_event(void *ctx, enum wpa_event_type event, +- union wpa_event_data *data) ++void supplicant_event(void *ctx, enum wpa_event_type event, ++ union wpa_event_data *data) + { + struct wpa_supplicant *wpa_s = ctx; + u16 reason_code = 0; +--- a/wpa_supplicant/wpa_supplicant.c ++++ b/wpa_supplicant/wpa_supplicant.c +@@ -2921,6 +2921,9 @@ static void wpa_supplicant_deinit_iface( + } + } + ++extern void supplicant_event(void *ctx, enum wpa_event_type event, ++ union wpa_event_data *data); ++ + + /** + * wpa_supplicant_add_iface - Add a new network interface +@@ -3113,6 +3116,7 @@ struct wpa_global * wpa_supplicant_init( + wpa_msg_register_ifname_cb(wpa_supplicant_msg_ifname_cb); + #endif /* CONFIG_NO_WPA_MSG */ + ++ wpa_supplicant_event = supplicant_event; + wpa_debug_open_file(params->wpa_debug_file_path); + if (params->wpa_debug_syslog) + wpa_debug_open_syslog(); +--- a/hostapd/main.c ++++ b/hostapd/main.c +@@ -530,6 +530,9 @@ static int hostapd_get_global_ctrl_iface + return 0; + } + ++void hostapd_wpa_event(void *ctx, enum wpa_event_type event, ++ union wpa_event_data *data); ++ + + int main(int argc, char *argv[]) + { +@@ -555,6 +558,7 @@ int main(int argc, char *argv[]) + interfaces.global_iface_name = NULL; + interfaces.global_ctrl_sock = -1; + ++ wpa_supplicant_event = hostapd_wpa_event; + for (;;) { + c = getopt(argc, argv, "Bde:f:hKP:tvg:"); + if (c < 0) +--- a/src/drivers/drivers.c ++++ b/src/drivers/drivers.c +@@ -7,7 +7,11 @@ + */ + + #include "includes.h" ++#include "common.h" ++#include "driver.h" + ++void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event, ++ union wpa_event_data *data); + + #ifdef CONFIG_DRIVER_WEXT + extern struct wpa_driver_ops wpa_driver_wext_ops; /* driver_wext.c */ diff --git a/package/hostapd/patches/420-timestamp_check.patch b/package/hostapd/patches/420-timestamp_check.patch new file mode 100644 index 000000000..b2d4a0511 --- /dev/null +++ b/package/hostapd/patches/420-timestamp_check.patch @@ -0,0 +1,12 @@ +--- a/src/tls/x509v3.c ++++ b/src/tls/x509v3.c +@@ -1848,6 +1848,9 @@ int x509_certificate_chain_validate(stru + if (chain_trusted) + continue; + ++#ifdef NO_TIMESTAMP_CHECK ++ disable_time_checks = 1; ++#endif + if (!disable_time_checks && + ((unsigned long) now.sec < + (unsigned long) cert->not_before || diff --git a/package/hostapd/patches/430-rescan_immediately.patch b/package/hostapd/patches/430-rescan_immediately.patch new file mode 100644 index 000000000..51d41f800 --- /dev/null +++ b/package/hostapd/patches/430-rescan_immediately.patch @@ -0,0 +1,11 @@ +--- a/wpa_supplicant/wpa_supplicant.c ++++ b/wpa_supplicant/wpa_supplicant.c +@@ -2388,7 +2388,7 @@ static struct wpa_supplicant * wpa_suppl + if (wpa_s == NULL) + return NULL; + wpa_s->scan_req = 1; +- wpa_s->scan_interval = 5; ++ wpa_s->scan_interval = 1; + wpa_s->new_connection = 1; + wpa_s->parent = wpa_s; + wpa_s->sched_scanning = 0; diff --git a/package/hostapd/patches/440-optional_rfkill.patch b/package/hostapd/patches/440-optional_rfkill.patch new file mode 100644 index 000000000..be18458b2 --- /dev/null +++ b/package/hostapd/patches/440-optional_rfkill.patch @@ -0,0 +1,261 @@ +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -218,7 +218,9 @@ struct wpa_driver_nl80211_data { + int if_removed; + int if_disabled; + int ignore_if_down_event; ++#ifdef CONFIG_RFKILL + struct rfkill_data *rfkill; ++#endif + struct wpa_driver_capa capa; + int has_capability; + +@@ -2828,7 +2830,7 @@ static int wpa_driver_nl80211_init_nl(st + return 0; + } + +- ++#ifdef CONFIG_RFKILL + static void wpa_driver_nl80211_rfkill_blocked(void *ctx) + { + wpa_printf(MSG_DEBUG, "nl80211: RFKILL blocked"); +@@ -2851,6 +2853,7 @@ static void wpa_driver_nl80211_rfkill_un + } + /* rtnetlink ifup handler will report interface as enabled */ + } ++#endif /* CONFIG_RFKILL */ + + + static void nl80211_get_phy_name(struct wpa_driver_nl80211_data *drv) +@@ -2979,7 +2982,9 @@ static void * wpa_driver_nl80211_init(vo + void *global_priv) + { + struct wpa_driver_nl80211_data *drv; ++#ifdef CONFIG_RFKILL + struct rfkill_config *rcfg; ++#endif + struct i802_bss *bss; + + if (global_priv == NULL) +@@ -3013,6 +3018,7 @@ static void * wpa_driver_nl80211_init(vo + + nl80211_get_phy_name(drv); + ++#ifdef CONFIG_RFKILL + rcfg = os_zalloc(sizeof(*rcfg)); + if (rcfg == NULL) + goto failed; +@@ -3025,6 +3031,7 @@ static void * wpa_driver_nl80211_init(vo + wpa_printf(MSG_DEBUG, "nl80211: RFKILL status not available"); + os_free(rcfg); + } ++#endif /* CONFIG_RFKILL */ + + if (wpa_driver_nl80211_finish_drv_init(drv)) + goto failed; +@@ -3311,10 +3318,12 @@ static void nl80211_mgmt_unsubscribe(str + } + + ++#ifdef CONFIG_RFKILL + static void wpa_driver_nl80211_send_rfkill(void *eloop_ctx, void *timeout_ctx) + { + wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL); + } ++#endif /* CONFIG_RFKILL */ + + static int + wpa_driver_nl80211_finish_drv_init_sta(struct wpa_driver_nl80211_data *drv, +@@ -3335,13 +3344,16 @@ wpa_driver_nl80211_finish_drv_init_sta(s + } + + if (linux_set_iface_flags(drv->global->ioctl_sock, bss->ifname, 1)) { ++#ifdef CONFIG_RFKILL + if (rfkill_is_blocked(drv->rfkill)) { + wpa_printf(MSG_DEBUG, "nl80211: Could not yet enable " + "interface '%s' due to rfkill", + bss->ifname); + drv->if_disabled = 1; + *send_rfkill_event = 1; +- } else { ++ } else ++#endif ++ { + wpa_printf(MSG_ERROR, "nl80211: Could not set " + "interface '%s' UP", bss->ifname); + return -1; +@@ -3372,8 +3384,10 @@ wpa_driver_nl80211_finish_drv_init(struc + return -1; + + if (send_rfkill_event) { ++#ifdef CONFIG_RFKILL + eloop_register_timeout(0, 0, wpa_driver_nl80211_send_rfkill, + drv, drv->ctx); ++#endif + } + + return 0; +@@ -3460,7 +3474,9 @@ static void wpa_driver_nl80211_deinit(vo + + netlink_send_oper_ifla(drv->global->netlink, drv->ifindex, 0, + IF_OPER_UP); ++#ifdef CONFIG_RFKILL + rfkill_deinit(drv->rfkill); ++#endif + + eloop_cancel_timeout(wpa_driver_nl80211_scan_timeout, drv, drv->ctx); + +--- a/src/drivers/driver_wext.c ++++ b/src/drivers/driver_wext.c +@@ -742,7 +742,7 @@ static void wpa_driver_wext_event_rtm_de + } + } + +- ++#ifdef CONFIG_RFKILL + static void wpa_driver_wext_rfkill_blocked(void *ctx) + { + wpa_printf(MSG_DEBUG, "WEXT: RFKILL blocked"); +@@ -764,7 +764,7 @@ static void wpa_driver_wext_rfkill_unblo + } + /* rtnetlink ifup handler will report interface as enabled */ + } +- ++#endif /* CONFIG_RFKILL */ + + static void wext_get_phy_name(struct wpa_driver_wext_data *drv) + { +@@ -810,7 +810,9 @@ void * wpa_driver_wext_init(void *ctx, c + { + struct wpa_driver_wext_data *drv; + struct netlink_config *cfg; ++#ifdef CONFIG_RFKILL + struct rfkill_config *rcfg; ++#endif + char path[128]; + struct stat buf; + +@@ -845,6 +847,7 @@ void * wpa_driver_wext_init(void *ctx, c + goto err2; + } + ++#ifdef CONFIG_RFKILL + rcfg = os_zalloc(sizeof(*rcfg)); + if (rcfg == NULL) + goto err3; +@@ -857,6 +860,7 @@ void * wpa_driver_wext_init(void *ctx, c + wpa_printf(MSG_DEBUG, "WEXT: RFKILL status not available"); + os_free(rcfg); + } ++#endif /* CONFIG_RFKILL */ + + drv->mlme_sock = -1; + +@@ -874,7 +878,9 @@ void * wpa_driver_wext_init(void *ctx, c + return drv; + + err3: ++#ifdef CONFIG_RFKILL + rfkill_deinit(drv->rfkill); ++#endif + netlink_deinit(drv->netlink); + err2: + close(drv->ioctl_sock); +@@ -884,10 +890,12 @@ err1: + } + + ++#ifdef CONFIG_RFKILL + static void wpa_driver_wext_send_rfkill(void *eloop_ctx, void *timeout_ctx) + { + wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL); + } ++#endif /* CONFIG_RFKILL */ + + + static int wpa_driver_wext_finish_drv_init(struct wpa_driver_wext_data *drv) +@@ -895,13 +903,16 @@ static int wpa_driver_wext_finish_drv_in + int send_rfkill_event = 0; + + if (linux_set_iface_flags(drv->ioctl_sock, drv->ifname, 1) < 0) { ++#ifdef CONFIG_RFKILL + if (rfkill_is_blocked(drv->rfkill)) { + wpa_printf(MSG_DEBUG, "WEXT: Could not yet enable " + "interface '%s' due to rfkill", + drv->ifname); + drv->if_disabled = 1; + send_rfkill_event = 1; +- } else { ++ } else ++#endif ++ { + wpa_printf(MSG_ERROR, "WEXT: Could not set " + "interface '%s' UP", drv->ifname); + return -1; +@@ -949,8 +960,10 @@ static int wpa_driver_wext_finish_drv_in + 1, IF_OPER_DORMANT); + + if (send_rfkill_event) { ++#ifdef CONFIG_RFKILL + eloop_register_timeout(0, 0, wpa_driver_wext_send_rfkill, + drv, drv->ctx); ++#endif + } + + return 0; +@@ -980,7 +993,9 @@ void wpa_driver_wext_deinit(void *priv) + + netlink_send_oper_ifla(drv->netlink, drv->ifindex, 0, IF_OPER_UP); + netlink_deinit(drv->netlink); ++#ifdef CONFIG_RFKILL + rfkill_deinit(drv->rfkill); ++#endif + + if (drv->mlme_sock >= 0) + eloop_unregister_read_sock(drv->mlme_sock); +--- a/src/drivers/drivers.mak ++++ b/src/drivers/drivers.mak +@@ -25,7 +25,6 @@ NEED_SME=y + NEED_AP_MLME=y + NEED_NETLINK=y + NEED_LINUX_IOCTL=y +-NEED_RFKILL=y + + ifdef CONFIG_LIBNL32 + DRV_LIBS += -lnl-3 +@@ -101,7 +100,6 @@ DRV_WPA_CFLAGS += -DCONFIG_DRIVER_WEXT + CONFIG_WIRELESS_EXTENSION=y + NEED_NETLINK=y + NEED_LINUX_IOCTL=y +-NEED_RFKILL=y + endif + + ifdef CONFIG_DRIVER_NDIS +@@ -127,7 +125,6 @@ endif + ifdef CONFIG_WIRELESS_EXTENSION + DRV_WPA_CFLAGS += -DCONFIG_WIRELESS_EXTENSION + DRV_WPA_OBJS += ../src/drivers/driver_wext.o +-NEED_RFKILL=y + endif + + ifdef NEED_NETLINK +@@ -140,6 +137,7 @@ endif + + ifdef NEED_RFKILL + DRV_OBJS += ../src/drivers/rfkill.o ++DRV_WPA_CFLAGS += -DCONFIG_RFKILL + endif + + ifdef CONFIG_VLAN_NETLINK +--- a/src/drivers/driver_wext.h ++++ b/src/drivers/driver_wext.h +@@ -22,7 +22,9 @@ struct wpa_driver_wext_data { + int ifindex2; + int if_removed; + int if_disabled; ++#ifdef CONFIG_RFKILL + struct rfkill_data *rfkill; ++#endif + u8 *assoc_req_ies; + size_t assoc_req_ies_len; + u8 *assoc_resp_ies; diff --git a/package/hostapd/patches/450-reload_freq_change.patch b/package/hostapd/patches/450-reload_freq_change.patch new file mode 100644 index 000000000..f11593fcd --- /dev/null +++ b/package/hostapd/patches/450-reload_freq_change.patch @@ -0,0 +1,23 @@ +--- a/src/ap/hostapd.c ++++ b/src/ap/hostapd.c +@@ -140,6 +140,20 @@ int hostapd_reload_config(struct hostapd + oldconf = hapd->iconf; + iface->conf = newconf; + ++ hostapd_select_hw_mode(iface); ++ iface->freq = hostapd_hw_get_freq(hapd, newconf->channel); ++ ++ if (hostapd_set_freq(hapd, newconf->hw_mode, iface->freq, ++ newconf->channel, ++ newconf->ieee80211n, ++ newconf->secondary_channel)) { ++ wpa_printf(MSG_ERROR, "Could not set channel for " ++ "kernel driver"); ++ } ++ ++ if (iface->current_mode) ++ hostapd_prepare_rates(iface, iface->current_mode); ++ + for (j = 0; j < iface->num_bss; j++) { + hapd = iface->bss[j]; + hapd->iconf = newconf; diff --git a/package/hostapd/patches/451-nl80211_del_beacon_bss.patch b/package/hostapd/patches/451-nl80211_del_beacon_bss.patch new file mode 100644 index 000000000..801b78b12 --- /dev/null +++ b/package/hostapd/patches/451-nl80211_del_beacon_bss.patch @@ -0,0 +1,63 @@ +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -3394,16 +3394,18 @@ wpa_driver_nl80211_finish_drv_init(struc + } + + +-static int wpa_driver_nl80211_del_beacon(struct wpa_driver_nl80211_data *drv) ++static int wpa_driver_nl80211_del_bss_beacon(struct i802_bss *bss) + { ++ struct wpa_driver_nl80211_data *drv = bss->drv; + struct nl_msg *msg; + ++ bss->beacon_set = 0; + msg = nlmsg_alloc(); + if (!msg) + return -ENOMEM; + + nl80211_cmd(drv, msg, 0, NL80211_CMD_DEL_BEACON); +- NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, drv->ifindex); ++ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, bss->ifindex); + + return send_and_recv_msgs(drv, msg, NULL, NULL); + nla_put_failure: +@@ -3411,6 +3413,21 @@ static int wpa_driver_nl80211_del_beacon + return -ENOBUFS; + } + ++static int wpa_driver_nl80211_del_beacon(struct wpa_driver_nl80211_data *drv) ++{ ++ struct i802_bss *bss; ++ ++ for (bss = &drv->first_bss; bss; bss = bss->next) ++ wpa_driver_nl80211_del_bss_beacon(bss); ++ ++ return 0; ++} ++ ++static int wpa_driver_nl80211_stop_ap(void *priv) ++{ ++ struct i802_bss *bss = priv; ++ return wpa_driver_nl80211_del_beacon(bss->drv); ++} + + /** + * wpa_driver_nl80211_deinit - Deinitialize nl80211 driver interface +@@ -9238,4 +9255,5 @@ const struct wpa_driver_ops wpa_driver_n + .send_tdls_mgmt = nl80211_send_tdls_mgmt, + .tdls_oper = nl80211_tdls_oper, + #endif /* CONFIG_TDLS */ ++ .stop_ap = wpa_driver_nl80211_stop_ap, + }; +--- a/src/drivers/driver.h ++++ b/src/drivers/driver.h +@@ -2053,6 +2053,9 @@ struct wpa_driver_ops { + */ + int (*probe_req_report)(void *priv, int report); + ++ ++ int (*stop_ap)(void *priv); ++ + /** + * deinit_ap - Deinitialize AP mode + * @priv: Private driver interface data diff --git a/package/hostapd/patches/452-ctrl_iface_reload.patch b/package/hostapd/patches/452-ctrl_iface_reload.patch new file mode 100644 index 000000000..81dcfedde --- /dev/null +++ b/package/hostapd/patches/452-ctrl_iface_reload.patch @@ -0,0 +1,98 @@ +--- a/hostapd/ctrl_iface.c ++++ b/hostapd/ctrl_iface.c +@@ -33,6 +33,7 @@ + #include "wps/wps.h" + #include "config_file.h" + #include "ctrl_iface.h" ++#include "config_file.h" + + + struct wpa_ctrl_dst { +@@ -43,6 +44,7 @@ struct wpa_ctrl_dst { + int errors; + }; + ++static char *reload_opts = NULL; + + static void hostapd_ctrl_iface_send(struct hostapd_data *hapd, int level, + const char *buf, size_t len); +@@ -152,6 +154,68 @@ static int hostapd_ctrl_iface_new_sta(st + return 0; + } + ++static int hostapd_ctrl_iface_set_down(struct hostapd_data *hapd) ++{ ++ if (hapd->driver->stop_ap) ++ hapd->driver->stop_ap(hapd->drv_priv); ++ return 0; ++} ++ ++static char *get_option(char *opt, char *str) ++{ ++ int len = strlen(str); ++ ++ if (!strncmp(opt, str, len)) ++ return opt + len; ++ else ++ return NULL; ++} ++ ++static struct hostapd_config *hostapd_ctrl_iface_config_read(const char *fname) ++{ ++ struct hostapd_config *conf; ++ char *opt, *val; ++ ++ conf = hostapd_config_read(fname); ++ if (!conf) ++ return NULL; ++ ++ for (opt = strtok(reload_opts, " "); ++ opt; ++ opt = strtok(NULL, " ")) { ++ ++ if ((val = get_option(opt, "channel="))) ++ conf->channel = atoi(val); ++ else if ((val = get_option(opt, "ht_capab="))) ++ conf->ht_capab = atoi(val); ++ else if ((val = get_option(opt, "ht_capab_mask="))) ++ conf->ht_capab &= atoi(val); ++ else if ((val = get_option(opt, "sec_chan="))) ++ conf->secondary_channel = atoi(val); ++ else if ((val = get_option(opt, "hw_mode="))) ++ conf->hw_mode = atoi(val); ++ else if ((val = get_option(opt, "ieee80211n="))) ++ conf->ieee80211n = atoi(val); ++ else ++ break; ++ } ++ ++ return conf; ++} ++ ++static int hostapd_ctrl_iface_update(struct hostapd_data *hapd, char *txt) ++{ ++ struct hostapd_config * (*config_read_cb)(const char *config_fname); ++ struct hostapd_iface *iface = hapd->iface; ++ ++ config_read_cb = iface->interfaces->config_read_cb; ++ iface->interfaces->config_read_cb = hostapd_ctrl_iface_config_read; ++ reload_opts = txt; ++ ++ hostapd_reload_config(iface); ++ ++ iface->interfaces->config_read_cb = config_read_cb; ++} + + #ifdef CONFIG_IEEE80211W + #ifdef NEED_AP_MLME +@@ -864,6 +928,10 @@ static void hostapd_ctrl_iface_receive(i + reply_len += res; + } + #endif /* CONFIG_NO_RADIUS */ ++ } else if (os_strcmp(buf, "DOWN") == 0) { ++ hostapd_ctrl_iface_set_down(hapd); ++ } else if (os_strncmp(buf, "UPDATE ", 7) == 0) { ++ hostapd_ctrl_iface_update(hapd, buf + 7); + } else if (os_strcmp(buf, "STA-FIRST") == 0) { + reply_len = hostapd_ctrl_iface_sta_first(hapd, reply, + reply_size); diff --git a/package/hostapd/patches/453-ap_sta_support.patch b/package/hostapd/patches/453-ap_sta_support.patch new file mode 100644 index 000000000..4b6c0f164 --- /dev/null +++ b/package/hostapd/patches/453-ap_sta_support.patch @@ -0,0 +1,221 @@ +--- a/wpa_supplicant/wpa_supplicant_i.h ++++ b/wpa_supplicant/wpa_supplicant_i.h +@@ -95,6 +95,8 @@ struct wpa_interface { + * receiving of EAPOL frames from an additional interface. + */ + const char *bridge_ifname; ++ ++ const char *hostapd_ctrl; + }; + + /** +@@ -294,6 +296,8 @@ struct wpa_supplicant { + #endif /* CONFIG_CTRL_IFACE_DBUS_NEW */ + char bridge_ifname[16]; + ++ struct wpa_ctrl *hostapd; ++ + char *confname; + struct wpa_config *conf; + int countermeasures; +--- a/wpa_supplicant/Makefile ++++ b/wpa_supplicant/Makefile +@@ -13,6 +13,10 @@ PKG_CONFIG ?= pkg-config + CFLAGS += -I../src + CFLAGS += -I../src/utils + ++ifdef MULTICALL ++CFLAGS += -DMULTICALL ++endif ++ + -include .config + -include $(if $(MULTICALL),../hostapd/.config) + +@@ -76,6 +80,10 @@ OBJS_c = wpa_cli.o ../src/common/wpa_ctr + OBJS_c += ../src/utils/wpa_debug.o + OBJS_c += ../src/utils/common.o + ++ifdef MULTICALL ++OBJS += ../src/common/wpa_ctrl.o ++endif ++ + ifndef CONFIG_OS + ifdef CONFIG_NATIVE_WINDOWS + CONFIG_OS=win32 +--- a/wpa_supplicant/wpa_supplicant.c ++++ b/wpa_supplicant/wpa_supplicant.c +@@ -107,6 +107,55 @@ extern int wpa_debug_show_keys; + extern int wpa_debug_timestamp; + extern struct wpa_driver_ops *wpa_drivers[]; + ++#ifdef MULTICALL ++static int hostapd_stop(struct wpa_supplicant *wpa_s) ++{ ++ const char *cmd = "DOWN"; ++ char buf[256]; ++ int len = sizeof(buf); ++ ++ if (wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL) < 0) { ++ wpa_printf(MSG_ERROR, "\nFailed to stop hostapd AP interfaces\n"); ++ return -1; ++ } ++ return 0; ++} ++ ++static int hostapd_reload(struct wpa_supplicant *wpa_s, struct wpa_bss *bss) ++{ ++ char *cmd = NULL; ++ char buf[256]; ++ int len = sizeof(buf); ++ int channel, hw_mode; ++ int ret; ++ ++ if (!bss) ++ return; ++ ++ if (bss->freq < 4000) { ++ hw_mode = HOSTAPD_MODE_IEEE80211G; ++ channel = (bss->freq - 2407) / 5; ++ } else { ++ hw_mode = HOSTAPD_MODE_IEEE80211A; ++ channel = (bss->freq - 5000) / 5; ++ } ++ ++ if (asprintf(&cmd, "UPDATE channel=%d sec_chan=0 hw_mode=%d ieee80211n=%d", ++ channel, hw_mode, !!bss->ht_capab) < 0) { ++ return -1; ++ } ++ ++ ret = wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL); ++ free(cmd); ++ ++ if (ret < 0) { ++ wpa_printf(MSG_ERROR, "\nFailed to reload hostapd AP interfaces\n"); ++ return -1; ++ } ++ return 0; ++} ++#endif ++ + /* Configure default/group WEP keys for static WEP */ + int wpa_set_wep_keys(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid) + { +@@ -672,8 +721,16 @@ void wpa_supplicant_set_state(struct wpa + #endif /* CONFIG_P2P */ + + sme_sched_obss_scan(wpa_s, 1); ++#ifdef MULTICALL ++ if (wpa_s->hostapd) ++ hostapd_reload(wpa_s, wpa_s->current_bss); ++#endif + } else if (state == WPA_DISCONNECTED || state == WPA_ASSOCIATING || + state == WPA_ASSOCIATED) { ++#ifdef MULTICALL ++ if (wpa_s->hostapd) ++ hostapd_stop(wpa_s); ++#endif + wpa_s->new_connection = 1; + wpa_drv_set_operstate(wpa_s, 0); + #ifndef IEEE8021X_EAPOL +@@ -2727,6 +2784,21 @@ static int wpa_supplicant_init_iface(str + os_strlcpy(wpa_s->bridge_ifname, iface->bridge_ifname, + sizeof(wpa_s->bridge_ifname)); + } ++#ifdef MULTICALL ++ if (iface->hostapd_ctrl) { ++ char *cmd = "DOWN"; ++ char buf[256]; ++ int len = sizeof(buf); ++ ++ wpa_s->hostapd = wpa_ctrl_open(iface->hostapd_ctrl); ++ if (!wpa_s->hostapd) { ++ wpa_printf(MSG_ERROR, "\nFailed to connect to hostapd\n"); ++ return -1; ++ } ++ if (hostapd_stop(wpa_s) < 0) ++ return -1; ++ } ++#endif + + /* RSNA Supplicant Key Management - INITIALIZE */ + eapol_sm_notify_portEnabled(wpa_s->eapol, FALSE); +--- a/wpa_supplicant/bss.c ++++ b/wpa_supplicant/bss.c +@@ -11,6 +11,7 @@ + #include "utils/common.h" + #include "utils/eloop.h" + #include "common/ieee802_11_defs.h" ++#include "common/ieee802_11_common.h" + #include "drivers/driver.h" + #include "wpa_supplicant_i.h" + #include "config.h" +@@ -139,6 +140,8 @@ struct wpa_bss * wpa_bss_get(struct wpa_ + + static void wpa_bss_copy_res(struct wpa_bss *dst, struct wpa_scan_res *src) + { ++ struct ieee80211_ht_capabilities *capab; ++ struct ieee802_11_elems elems; + os_time_t usec; + + dst->flags = src->flags; +@@ -151,6 +154,12 @@ static void wpa_bss_copy_res(struct wpa_ + dst->level = src->level; + dst->tsf = src->tsf; + ++ memset(&elems, 0, sizeof(elems)); ++ ieee802_11_parse_elems((u8 *) (src + 1), src->ie_len, &elems, 0); ++ capab = (struct ieee80211_ht_capabilities *) elems.ht_capabilities; ++ if (capab) ++ dst->ht_capab = le_to_host16(capab->ht_capabilities_info); ++ + os_get_time(&dst->last_update); + dst->last_update.sec -= src->age / 1000; + usec = (src->age % 1000) * 1000; +--- a/wpa_supplicant/bss.h ++++ b/wpa_supplicant/bss.h +@@ -72,6 +72,7 @@ struct wpa_bss { + u8 bssid[ETH_ALEN]; + u8 hessid[ETH_ALEN]; + u8 ssid[32]; ++ u16 ht_capab; + size_t ssid_len; + int freq; + u16 beacon_int; +--- a/wpa_supplicant/main.c ++++ b/wpa_supplicant/main.c +@@ -25,7 +25,7 @@ static void usage(void) + "usage:\n" + " wpa_supplicant [-BddhKLqqstuvW] [-P] " + "[-g] \\\n" +- " -i -c [-C] [-D] " ++ " -i -c [-C] [-D] [-H]" + "[-p] \\\n" + " [-b] [-f] [-e] " + "\\\n" +@@ -67,6 +67,7 @@ static void usage(void) + #endif /* CONFIG_DEBUG_LINUX_TRACING */ + printf(" -t = include timestamp in debug messages\n" + " -h = show this help text\n" ++ " -H = connect to a hostapd instance to manage state changes\n" + " -L = show license (BSD)\n" + " -o = override driver parameter for new interfaces\n" + " -O = override ctrl_interface parameter for new interfaces\n" +@@ -155,7 +156,7 @@ int main(int argc, char *argv[]) + + for (;;) { + c = getopt(argc, argv, +- "b:Bc:C:D:de:f:g:hi:KLNo:O:p:P:qsTtuvW"); ++ "b:Bc:C:D:de:f:g:hH:i:KLNo:O:p:P:qsTtuvW"); + if (c < 0) + break; + switch (c) { +@@ -199,6 +200,9 @@ int main(int argc, char *argv[]) + usage(); + exitcode = 0; + goto out; ++ case 'H': ++ iface->hostapd_ctrl = optarg; ++ break; + case 'i': + iface->ifname = optarg; + break; diff --git a/package/hostapd/patches/460-disable_ctrl_iface_mib.patch b/package/hostapd/patches/460-disable_ctrl_iface_mib.patch new file mode 100644 index 000000000..2f03179a0 --- /dev/null +++ b/package/hostapd/patches/460-disable_ctrl_iface_mib.patch @@ -0,0 +1,168 @@ +--- a/hostapd/Makefile ++++ b/hostapd/Makefile +@@ -135,6 +135,9 @@ endif + ifdef CONFIG_NO_CTRL_IFACE + CFLAGS += -DCONFIG_NO_CTRL_IFACE + else ++ifdef CONFIG_CTRL_IFACE_MIB ++CFLAGS += -DCONFIG_CTRL_IFACE_MIB ++endif + OBJS += ctrl_iface.o + OBJS += ../src/ap/ctrl_iface_ap.o + endif +--- a/hostapd/ctrl_iface.c ++++ b/hostapd/ctrl_iface.c +@@ -899,6 +899,7 @@ static void hostapd_ctrl_iface_receive(i + } else if (os_strncmp(buf, "RELOG", 5) == 0) { + if (wpa_debug_reopen_file() < 0) + reply_len = -1; ++#ifdef CONFIG_CTRL_IFACE_MIB + } else if (os_strcmp(buf, "MIB") == 0) { + reply_len = ieee802_11_get_mib(hapd, reply, reply_size); + if (reply_len >= 0) { +@@ -928,10 +929,12 @@ static void hostapd_ctrl_iface_receive(i + reply_len += res; + } + #endif /* CONFIG_NO_RADIUS */ ++#endif + } else if (os_strcmp(buf, "DOWN") == 0) { + hostapd_ctrl_iface_set_down(hapd); + } else if (os_strncmp(buf, "UPDATE ", 7) == 0) { + hostapd_ctrl_iface_update(hapd, buf + 7); ++#ifdef CONFIG_CTRL_IFACE_MIB + } else if (os_strcmp(buf, "STA-FIRST") == 0) { + reply_len = hostapd_ctrl_iface_sta_first(hapd, reply, + reply_size); +@@ -941,6 +944,7 @@ static void hostapd_ctrl_iface_receive(i + } else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) { + reply_len = hostapd_ctrl_iface_sta_next(hapd, buf + 9, reply, + reply_size); ++#endif + } else if (os_strcmp(buf, "ATTACH") == 0) { + if (hostapd_ctrl_iface_attach(hapd, &from, fromlen)) + reply_len = -1; +--- a/wpa_supplicant/Makefile ++++ b/wpa_supplicant/Makefile +@@ -751,6 +751,9 @@ ifdef CONFIG_IEEE80211N + OBJS += ../src/ap/ieee802_11_ht.o + endif + ifdef CONFIG_CTRL_IFACE ++ifdef CONFIG_CTRL_IFACE_MIB ++CFLAGS += -DCONFIG_CTRL_IFACE_MIB ++endif + OBJS += ../src/ap/ctrl_iface_ap.o + endif + +--- a/wpa_supplicant/ctrl_iface.c ++++ b/wpa_supplicant/ctrl_iface.c +@@ -4382,6 +4382,7 @@ char * wpa_supplicant_ctrl_iface_process + reply_len = -1; + } else if (os_strncmp(buf, "NOTE ", 5) == 0) { + wpa_printf(MSG_INFO, "NOTE: %s", buf + 5); ++#ifdef CONFIG_CTRL_IFACE_MIB + } else if (os_strcmp(buf, "MIB") == 0) { + reply_len = wpa_sm_get_mib(wpa_s->wpa, reply, reply_size); + if (reply_len >= 0) { +@@ -4393,6 +4394,7 @@ char * wpa_supplicant_ctrl_iface_process + else + reply_len += res; + } ++#endif + } else if (os_strncmp(buf, "STATUS", 6) == 0) { + reply_len = wpa_supplicant_ctrl_iface_status( + wpa_s, buf + 6, reply, reply_size); +@@ -4792,6 +4794,7 @@ char * wpa_supplicant_ctrl_iface_process + reply_len = wpa_supplicant_ctrl_iface_bss( + wpa_s, buf + 4, reply, reply_size); + #ifdef CONFIG_AP ++#ifdef CONFIG_CTRL_IFACE_MIB + } else if (os_strcmp(buf, "STA-FIRST") == 0) { + reply_len = ap_ctrl_iface_sta_first(wpa_s, reply, reply_size); + } else if (os_strncmp(buf, "STA ", 4) == 0) { +@@ -4800,6 +4803,7 @@ char * wpa_supplicant_ctrl_iface_process + } else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) { + reply_len = ap_ctrl_iface_sta_next(wpa_s, buf + 9, reply, + reply_size); ++#endif + } else if (os_strncmp(buf, "DEAUTHENTICATE ", 15) == 0) { + if (ap_ctrl_iface_sta_deauthenticate(wpa_s, buf + 15)) + reply_len = -1; +--- a/src/ap/ctrl_iface_ap.c ++++ b/src/ap/ctrl_iface_ap.c +@@ -20,6 +20,7 @@ + #include "ctrl_iface_ap.h" + #include "ap_drv_ops.h" + ++#ifdef CONFIG_CTRL_IFACE_MIB + + static int hostapd_ctrl_iface_sta_mib(struct hostapd_data *hapd, + struct sta_info *sta, +@@ -103,6 +104,7 @@ int hostapd_ctrl_iface_sta_next(struct h + return hostapd_ctrl_iface_sta_mib(hapd, sta->next, buf, buflen); + } + ++#endif + + #ifdef CONFIG_P2P_MANAGER + static int p2p_manager_disconnect(struct hostapd_data *hapd, u16 stype, +@@ -269,3 +271,4 @@ int hostapd_ctrl_iface_disassociate(stru + + return 0; + } ++ +--- a/src/ap/ieee802_1x.c ++++ b/src/ap/ieee802_1x.c +@@ -2034,6 +2034,7 @@ static const char * bool_txt(Boolean boo + return bool ? "TRUE" : "FALSE"; + } + ++#ifdef CONFIG_CTRL_IFACE_MIB + + int ieee802_1x_get_mib(struct hostapd_data *hapd, char *buf, size_t buflen) + { +@@ -2186,6 +2187,7 @@ int ieee802_1x_get_mib_sta(struct hostap + return len; + } + ++#endif + + static void ieee802_1x_finished(struct hostapd_data *hapd, + struct sta_info *sta, int success) +--- a/src/ap/wpa_auth.c ++++ b/src/ap/wpa_auth.c +@@ -2729,6 +2729,7 @@ static const char * wpa_bool_txt(int boo + return bool ? "TRUE" : "FALSE"; + } + ++#ifdef CONFIG_CTRL_IFACE_MIB + + #define RSN_SUITE "%02x-%02x-%02x-%d" + #define RSN_SUITE_ARG(s) \ +@@ -2873,7 +2874,7 @@ int wpa_get_mib_sta(struct wpa_state_mac + + return len; + } +- ++#endif + + void wpa_auth_countermeasures_start(struct wpa_authenticator *wpa_auth) + { +--- a/src/rsn_supp/wpa.c ++++ b/src/rsn_supp/wpa.c +@@ -1844,6 +1844,8 @@ static u32 wpa_key_mgmt_suite(struct wpa + } + + ++#ifdef CONFIG_CTRL_IFACE_MIB ++ + #define RSN_SUITE "%02x-%02x-%02x-%d" + #define RSN_SUITE_ARG(s) \ + ((s) >> 24) & 0xff, ((s) >> 16) & 0xff, ((s) >> 8) & 0xff, (s) & 0xff +@@ -1927,6 +1929,7 @@ int wpa_sm_get_mib(struct wpa_sm *sm, ch + + return (int) len; + } ++#endif + #endif /* CONFIG_CTRL_IFACE */ + + diff --git a/package/hostapd/patches/470-wpa_ie_cap_workaround.patch b/package/hostapd/patches/470-wpa_ie_cap_workaround.patch new file mode 100644 index 000000000..00a32229d --- /dev/null +++ b/package/hostapd/patches/470-wpa_ie_cap_workaround.patch @@ -0,0 +1,56 @@ +--- a/src/common/wpa_common.c ++++ b/src/common/wpa_common.c +@@ -959,6 +959,31 @@ const char * wpa_key_mgmt_txt(int key_mg + } + + ++static void wpa_fixup_wpa_ie_rsn(u8 *assoc_ie, const u8 *wpa_msg_ie, ++ size_t rsn_ie_len) ++{ ++ int pos, count; ++ ++ pos = sizeof(struct rsn_ie_hdr) + RSN_SELECTOR_LEN; ++ if (rsn_ie_len < pos + 2) ++ return; ++ ++ count = WPA_GET_LE16(wpa_msg_ie + pos); ++ pos += 2 + count * RSN_SELECTOR_LEN; ++ if (rsn_ie_len < pos + 2) ++ return; ++ ++ count = WPA_GET_LE16(wpa_msg_ie + pos); ++ pos += 2 + count * RSN_SELECTOR_LEN; ++ if (rsn_ie_len < pos + 2) ++ return; ++ ++ if (!assoc_ie[pos] && !assoc_ie[pos + 1] && ++ (wpa_msg_ie[pos] || wpa_msg_ie[pos + 1])) ++ memcpy(&assoc_ie[pos], &wpa_msg_ie[pos], 2); ++} ++ ++ + int wpa_compare_rsn_ie(int ft_initial_assoc, + const u8 *ie1, size_t ie1len, + const u8 *ie2, size_t ie2len) +@@ -966,8 +991,19 @@ int wpa_compare_rsn_ie(int ft_initial_as + if (ie1 == NULL || ie2 == NULL) + return -1; + +- if (ie1len == ie2len && os_memcmp(ie1, ie2, ie1len) == 0) +- return 0; /* identical IEs */ ++ if (ie1len == ie2len) { ++ u8 *ie_tmp; ++ ++ if (os_memcmp(ie1, ie2, ie1len) == 0) ++ return 0; /* identical IEs */ ++ ++ ie_tmp = alloca(ie1len); ++ memcpy(ie_tmp, ie1, ie1len); ++ wpa_fixup_wpa_ie_rsn(ie_tmp, ie2, ie1len); ++ ++ if (os_memcmp(ie_tmp, ie2, ie1len) == 0) ++ return 0; /* only mismatch in RSN capabilties */ ++ } + + #ifdef CONFIG_IEEE80211R + if (ft_initial_assoc) { diff --git a/package/hostapd/patches/480-terminate_on_setup_failure.patch b/package/hostapd/patches/480-terminate_on_setup_failure.patch new file mode 100644 index 000000000..6168a5cfc --- /dev/null +++ b/package/hostapd/patches/480-terminate_on_setup_failure.patch @@ -0,0 +1,81 @@ +--- a/src/ap/hostapd.c ++++ b/src/ap/hostapd.c +@@ -886,11 +886,8 @@ int hostapd_setup_interface_complete(str + size_t j; + u8 *prev_addr; + +- if (err) { +- wpa_printf(MSG_ERROR, "Interface initialization failed"); +- eloop_terminate(); +- return -1; +- } ++ if (err) ++ goto error; + + wpa_printf(MSG_DEBUG, "Completing interface initialization"); + if (hapd->iconf->channel) { +@@ -906,7 +903,7 @@ int hostapd_setup_interface_complete(str + hapd->iconf->secondary_channel)) { + wpa_printf(MSG_ERROR, "Could not set channel for " + "kernel driver"); +- return -1; ++ goto error; + } + } + +@@ -917,7 +914,7 @@ int hostapd_setup_interface_complete(str + hostapd_logger(hapd, NULL, HOSTAPD_MODULE_IEEE80211, + HOSTAPD_LEVEL_WARNING, + "Failed to prepare rates table."); +- return -1; ++ goto error; + } + } + +@@ -925,14 +922,14 @@ int hostapd_setup_interface_complete(str + hostapd_set_rts(hapd, hapd->iconf->rts_threshold)) { + wpa_printf(MSG_ERROR, "Could not set RTS threshold for " + "kernel driver"); +- return -1; ++ goto error; + } + + if (hapd->iconf->fragm_threshold > -1 && + hostapd_set_frag(hapd, hapd->iconf->fragm_threshold)) { + wpa_printf(MSG_ERROR, "Could not set fragmentation threshold " + "for kernel driver"); +- return -1; ++ goto error; + } + + prev_addr = hapd->own_addr; +@@ -942,7 +939,7 @@ int hostapd_setup_interface_complete(str + if (j) + os_memcpy(hapd->own_addr, prev_addr, ETH_ALEN); + if (hostapd_setup_bss(hapd, j == 0)) +- return -1; ++ goto error; + if (hostapd_mac_comp_empty(hapd->conf->bssid) == 0) + prev_addr = hapd->own_addr; + } +@@ -954,7 +951,7 @@ int hostapd_setup_interface_complete(str + if (hostapd_driver_commit(hapd) < 0) { + wpa_printf(MSG_ERROR, "%s: Failed to commit driver " + "configuration", __func__); +- return -1; ++ goto error; + } + + /* +@@ -975,6 +972,11 @@ int hostapd_setup_interface_complete(str + iface->bss[0]->conf->iface); + + return 0; ++ ++error: ++ wpa_printf(MSG_ERROR, "Interface initialization failed"); ++ eloop_terminate(); ++ return -1; + } + + diff --git a/package/hostapd/patches/500-random_pool_add_kernel.patch b/package/hostapd/patches/500-random_pool_add_kernel.patch new file mode 100644 index 000000000..e54e881d8 --- /dev/null +++ b/package/hostapd/patches/500-random_pool_add_kernel.patch @@ -0,0 +1,168 @@ +--- a/src/crypto/random.c ++++ b/src/crypto/random.c +@@ -33,6 +33,8 @@ + #include "sha1.h" + #include "random.h" + ++#define RANDOM_STAMPFILE "/var/run/.random_available" ++ + #define POOL_WORDS 32 + #define POOL_WORDS_MASK (POOL_WORDS - 1) + #define POOL_TAP1 26 +@@ -43,6 +45,8 @@ + #define EXTRACT_LEN 16 + #define MIN_READY_MARK 2 + ++#ifndef CONFIG_NO_RANDOM_POOL ++ + static u32 pool[POOL_WORDS]; + static unsigned int input_rotate = 0; + static unsigned int pool_pos = 0; +@@ -123,7 +127,7 @@ static void random_extract(u8 *out) + } + + +-void random_add_randomness(const void *buf, size_t len) ++static void random_pool_add_randomness(const void *buf, size_t len) + { + struct os_time t; + static unsigned int count = 0; +@@ -213,16 +217,22 @@ int random_get_bytes(void *buf, size_t l + int random_pool_ready(void) + { + #ifdef __linux__ ++ struct stat st; + int fd; + ssize_t res; + ++ if (stat(RANDOM_STAMPFILE, &st) == 0) ++ return 1; ++ + /* + * Make sure that there is reasonable entropy available before allowing + * some key derivation operations to proceed. + */ + +- if (dummy_key_avail == sizeof(dummy_key)) ++ if (dummy_key_avail == sizeof(dummy_key)) { ++ random_mark_pool_ready(); + return 1; /* Already initialized - good to continue */ ++ } + + /* + * Try to fetch some more data from the kernel high quality +@@ -257,6 +267,7 @@ int random_pool_ready(void) + if (dummy_key_avail == sizeof(dummy_key)) { + if (own_pool_ready < MIN_READY_MARK) + own_pool_ready = MIN_READY_MARK; ++ random_mark_pool_ready(); + random_write_entropy(); + return 1; + } +@@ -269,6 +280,7 @@ int random_pool_ready(void) + total_collected + 10 * own_pool_ready > MIN_COLLECT_ENTROPY) { + wpa_printf(MSG_INFO, "random: Allow operation to proceed " + "based on internal entropy"); ++ random_mark_pool_ready(); + return 1; + } + +@@ -284,10 +296,16 @@ int random_pool_ready(void) + + void random_mark_pool_ready(void) + { ++ int fd; ++ + own_pool_ready++; + wpa_printf(MSG_DEBUG, "random: Mark internal entropy pool to be " + "ready (count=%u/%u)", own_pool_ready, MIN_READY_MARK); + random_write_entropy(); ++ ++ fd = open(RANDOM_STAMPFILE, O_CREAT | O_WRONLY | O_EXCL | O_NOFOLLOW, 0600); ++ if (fd >= 0) ++ close(fd); + } + + +@@ -444,3 +462,22 @@ void random_deinit(void) + os_free(random_entropy_file); + random_entropy_file = NULL; + } ++ ++#endif /* CONFIG_NO_RANDOM_POOL */ ++ ++ ++void random_add_randomness(const void *buf, size_t len) ++{ ++#ifdef __linux__ ++ int fd; ++ ++ fd = open("/dev/random", O_RDWR); ++ if (fd >= 0) { ++ write(fd, buf, len); ++ close(fd); ++ } ++#endif ++#ifndef CONFIG_NO_RANDOM_POOL ++ random_pool_add_randomness(buf, len); ++#endif ++} +--- a/wpa_supplicant/Makefile ++++ b/wpa_supplicant/Makefile +@@ -1217,9 +1217,8 @@ endif + + ifdef CONFIG_NO_RANDOM_POOL + CFLAGS += -DCONFIG_NO_RANDOM_POOL +-else +-OBJS += ../src/crypto/random.o + endif ++OBJS += ../src/crypto/random.o + + ifdef CONFIG_CTRL_IFACE + ifeq ($(CONFIG_CTRL_IFACE), y) +--- a/wpa_supplicant/Android.mk ++++ b/wpa_supplicant/Android.mk +@@ -1161,9 +1161,8 @@ endif + + ifdef CONFIG_NO_RANDOM_POOL + L_CFLAGS += -DCONFIG_NO_RANDOM_POOL +-else +-OBJS += src/crypto/random.c + endif ++OBJS += src/crypto/random.c + + ifdef CONFIG_CTRL_IFACE + ifeq ($(CONFIG_CTRL_IFACE), y) +--- a/hostapd/Android.mk ++++ b/hostapd/Android.mk +@@ -748,11 +748,11 @@ endif + ifdef CONFIG_NO_RANDOM_POOL + L_CFLAGS += -DCONFIG_NO_RANDOM_POOL + else +-OBJS += src/crypto/random.c +-HOBJS += src/crypto/random.c + HOBJS += $(SHA1OBJS) + HOBJS += src/crypto/md5.c + endif ++OBJS += src/crypto/random.c ++HOBJS += src/crypto/random.c + + ifdef CONFIG_RADIUS_SERVER + L_CFLAGS += -DRADIUS_SERVER +--- a/hostapd/Makefile ++++ b/hostapd/Makefile +@@ -755,12 +755,12 @@ endif + ifdef CONFIG_NO_RANDOM_POOL + CFLAGS += -DCONFIG_NO_RANDOM_POOL + else +-OBJS += ../src/crypto/random.o +-HOBJS += ../src/crypto/random.o + HOBJS += ../src/utils/eloop.o + HOBJS += $(SHA1OBJS) + HOBJS += ../src/crypto/md5.o + endif ++OBJS += ../src/crypto/random.o ++HOBJS += ../src/crypto/random.o + + ifdef CONFIG_RADIUS_SERVER + CFLAGS += -DRADIUS_SERVER diff --git a/package/hostapd/patches/510-bring_down_interface.patch b/package/hostapd/patches/510-bring_down_interface.patch new file mode 100644 index 000000000..7481eb152 --- /dev/null +++ b/package/hostapd/patches/510-bring_down_interface.patch @@ -0,0 +1,19 @@ +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -7144,8 +7144,6 @@ static int wpa_driver_nl80211_set_mode(s + ret = nl80211_set_mode(drv, drv->ifindex, nlmode); + if (ret == -EACCES) + break; +- res = linux_set_iface_flags(drv->global->ioctl_sock, +- bss->ifname, 1); + if (res && !ret) + ret = -1; + else if (ret != -EBUSY) +@@ -7161,6 +7159,7 @@ static int wpa_driver_nl80211_set_mode(s + "interface is down"); + drv->nlmode = nlmode; + drv->ignore_if_down_event = 1; ++ linux_set_iface_flags(drv->global->ioctl_sock, bss->ifname, 1); + } + + done: diff --git a/package/hostapd/patches/520-fix_wps_pin_crash.patch b/package/hostapd/patches/520-fix_wps_pin_crash.patch new file mode 100644 index 000000000..29d154cef --- /dev/null +++ b/package/hostapd/patches/520-fix_wps_pin_crash.patch @@ -0,0 +1,12 @@ +--- a/hostapd/ctrl_iface.c ++++ b/hostapd/ctrl_iface.c +@@ -450,6 +450,9 @@ static int hostapd_ctrl_iface_wps_ap_pin + char *pos; + const char *pin_txt; + ++ if (!hapd->wps) ++ return -1; ++ + pos = os_strchr(txt, ' '); + if (pos) + *pos++ = '\0'; diff --git a/package/hostapd/patches/530-wps_single_auth_enc_type.patch b/package/hostapd/patches/530-wps_single_auth_enc_type.patch new file mode 100644 index 000000000..f05ea35cf --- /dev/null +++ b/package/hostapd/patches/530-wps_single_auth_enc_type.patch @@ -0,0 +1,25 @@ +--- a/src/ap/wps_hostapd.c ++++ b/src/ap/wps_hostapd.c +@@ -873,11 +873,9 @@ int hostapd_init_wps(struct hostapd_data + + if (conf->rsn_pairwise & WPA_CIPHER_CCMP) + wps->encr_types |= WPS_ENCR_AES; +- if (conf->rsn_pairwise & WPA_CIPHER_TKIP) ++ else if (conf->rsn_pairwise & WPA_CIPHER_TKIP) + wps->encr_types |= WPS_ENCR_TKIP; +- } +- +- if (conf->wpa & WPA_PROTO_WPA) { ++ } else if (conf->wpa & WPA_PROTO_WPA) { + if (conf->wpa_key_mgmt & WPA_KEY_MGMT_PSK) + wps->auth_types |= WPS_AUTH_WPAPSK; + if (conf->wpa_key_mgmt & WPA_KEY_MGMT_IEEE8021X) +@@ -885,7 +883,7 @@ int hostapd_init_wps(struct hostapd_data + + if (conf->wpa_pairwise & WPA_CIPHER_CCMP) + wps->encr_types |= WPS_ENCR_AES; +- if (conf->wpa_pairwise & WPA_CIPHER_TKIP) ++ else if (conf->wpa_pairwise & WPA_CIPHER_TKIP) + wps->encr_types |= WPS_ENCR_TKIP; + } + diff --git a/package/hostapd/patches/540-dynamic_20_40_mhz.patch b/package/hostapd/patches/540-dynamic_20_40_mhz.patch new file mode 100644 index 000000000..d58358c08 --- /dev/null +++ b/package/hostapd/patches/540-dynamic_20_40_mhz.patch @@ -0,0 +1,202 @@ +--- a/hostapd/config_file.c ++++ b/hostapd/config_file.c +@@ -2495,6 +2495,10 @@ static int hostapd_config_fill(struct ho + "ht_capab", line); + errors++; + } ++ } else if (os_strcmp(buf, "dynamic_ht40") == 0) { ++ conf->dynamic_ht40 = atoi(pos); ++ if (conf->dynamic_ht40 == 1) ++ conf->dynamic_ht40 = 1500; + } else if (os_strcmp(buf, "require_ht") == 0) { + conf->require_ht = atoi(pos); + #endif /* CONFIG_IEEE80211N */ +--- a/src/ap/ap_config.h ++++ b/src/ap/ap_config.h +@@ -501,6 +501,7 @@ struct hostapd_config { + int ieee80211n; + int secondary_channel; + int require_ht; ++ int dynamic_ht40; + u32 vht_capab; + int ieee80211ac; + int require_vht; +--- a/src/ap/hostapd.c ++++ b/src/ap/hostapd.c +@@ -22,6 +22,7 @@ + #include "beacon.h" + #include "iapp.h" + #include "ieee802_1x.h" ++#include "ieee802_11.h" + #include "ieee802_11_auth.h" + #include "vlan_init.h" + #include "wpa_auth.h" +@@ -323,6 +324,7 @@ static void hostapd_cleanup_iface_pre(st + + static void hostapd_cleanup_iface_partial(struct hostapd_iface *iface) + { ++ hostapd_deinit_ht(iface); + hostapd_free_hw_features(iface->hw_features, iface->num_hw_features); + iface->hw_features = NULL; + os_free(iface->current_rates); +--- a/src/ap/hostapd.h ++++ b/src/ap/hostapd.h +@@ -251,6 +251,9 @@ struct hostapd_iface { + /* Overlapping BSS information */ + int olbc_ht; + ++ int force_20mhz; ++ struct os_time last_20mhz_trigger; ++ + u16 ht_op_mode; + void (*scan_cb)(struct hostapd_iface *iface); + }; +--- a/src/ap/ieee802_11.c ++++ b/src/ap/ieee802_11.c +@@ -1220,6 +1220,9 @@ static void handle_beacon(struct hostapd + sizeof(mgmt->u.beacon)), &elems, + 0); + ++ if (!elems.ht_capabilities) ++ hostapd_trigger_20mhz(hapd->iface); ++ + ap_list_process_beacon(hapd->iface, mgmt, &elems, fi); + } + +--- a/src/ap/ieee802_11.h ++++ b/src/ap/ieee802_11.h +@@ -78,4 +78,17 @@ int hostapd_update_time_adv(struct hosta + void hostapd_client_poll_ok(struct hostapd_data *hapd, const u8 *addr); + u8 * hostapd_eid_bss_max_idle_period(struct hostapd_data *hapd, u8 *eid); + ++#ifdef CONFIG_IEEE80211N ++void hostapd_trigger_20mhz(struct hostapd_iface *iface); ++void hostapd_deinit_ht(struct hostapd_iface *iface); ++ ++#else ++static inline void hostapd_deinit_ht(struct hostapd_iface *iface) ++{ ++} ++static inline void hostapd_trigger_20mhz(struct hostapd_iface *iface) ++{ ++} ++#endif /* CONFIG_IEEE80211N */ ++ + #endif /* IEEE802_11_H */ +--- a/src/ap/ieee802_11_ht.c ++++ b/src/ap/ieee802_11_ht.c +@@ -20,9 +20,11 @@ + #include "drivers/driver.h" + #include "hostapd.h" + #include "ap_config.h" ++#include "ap_drv_ops.h" + #include "sta_info.h" + #include "beacon.h" + #include "ieee802_11.h" ++#include "utils/eloop.h" + + + u8 * hostapd_eid_ht_capabilities(struct hostapd_data *hapd, u8 *eid) +@@ -70,12 +72,15 @@ u8 * hostapd_eid_ht_operation(struct hos + + oper->control_chan = hapd->iconf->channel; + oper->operation_mode = host_to_le16(hapd->iface->ht_op_mode); +- if (hapd->iconf->secondary_channel == 1) +- oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE | +- HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; +- if (hapd->iconf->secondary_channel == -1) +- oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW | +- HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; ++ ++ if (!hapd->iface->force_20mhz) { ++ if (hapd->iconf->secondary_channel == 1) ++ oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE | ++ HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; ++ if (hapd->iconf->secondary_channel == -1) ++ oper->ht_param |= HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW | ++ HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH; ++ } + + pos += sizeof(*oper); + +@@ -271,3 +276,80 @@ void hostapd_get_ht_capab(struct hostapd + + neg_ht_cap->ht_capabilities_info = host_to_le16(cap); + } ++ ++static void hostapd_set_force_20mhz(struct hostapd_iface *iface); ++ ++static void hostapd_restore_40mhz(void *eloop_data, void *user_ctx) ++{ ++ struct hostapd_iface *iface = eloop_data; ++ struct os_time time; ++ int timeout; ++ ++ if (!iface->last_20mhz_trigger.sec) ++ return; ++ ++ os_get_time(&time); ++ timeout = iface->last_20mhz_trigger.sec + iface->conf->dynamic_ht40 - ++ time.sec; ++ ++ if (timeout > 0) { ++ eloop_register_timeout(timeout, 0, hostapd_restore_40mhz, ++ iface, NULL); ++ return; ++ } ++ ++ iface->last_20mhz_trigger.sec = 0; ++ iface->last_20mhz_trigger.usec = 0; ++ ++ iface->force_20mhz = 0; ++ hostapd_set_force_20mhz(iface); ++} ++ ++static void hostapd_set_force_20mhz(struct hostapd_iface *iface) ++{ ++ int secondary_channel; ++ int i; ++ ++ ieee802_11_set_beacons(iface); ++ ++ for (i = 0; i < iface->num_bss; i++) { ++ struct hostapd_data *hapd = iface->bss[i]; ++ ++ if (iface->force_20mhz) ++ secondary_channel = 0; ++ else ++ secondary_channel = hapd->iconf->secondary_channel; ++ ++ if (hostapd_set_freq(hapd, hapd->iconf->hw_mode, iface->freq, ++ hapd->iconf->channel, ++ hapd->iconf->ieee80211n, ++ secondary_channel)) { ++ wpa_printf(MSG_ERROR, "Could not set channel for " ++ "kernel driver"); ++ } ++ } ++} ++ ++void hostapd_deinit_ht(struct hostapd_iface *iface) ++{ ++ eloop_cancel_timeout(hostapd_restore_40mhz, iface, NULL); ++} ++ ++void hostapd_trigger_20mhz(struct hostapd_iface *iface) ++{ ++ if (!iface->conf->dynamic_ht40) ++ return; ++ ++ if (!iface->force_20mhz) { ++ iface->force_20mhz = 1; ++ hostapd_set_force_20mhz(iface); ++ } ++ ++ if (!iface->last_20mhz_trigger.sec) { ++ eloop_cancel_timeout(hostapd_restore_40mhz, iface, NULL); ++ eloop_register_timeout(iface->conf->dynamic_ht40, 0, ++ hostapd_restore_40mhz, iface, NULL); ++ } ++ ++ os_get_time(&iface->last_20mhz_trigger); ++} diff --git a/package/hostapd/patches/550-limit_debug_messages.patch b/package/hostapd/patches/550-limit_debug_messages.patch new file mode 100644 index 000000000..659e98011 --- /dev/null +++ b/package/hostapd/patches/550-limit_debug_messages.patch @@ -0,0 +1,213 @@ +--- a/src/utils/wpa_debug.c ++++ b/src/utils/wpa_debug.c +@@ -201,7 +201,7 @@ void wpa_debug_close_linux_tracing(void) + * + * Note: New line '\n' is added to the end of the text when printing to stdout. + */ +-void wpa_printf(int level, const char *fmt, ...) ++void _wpa_printf(int level, const char *fmt, ...) + { + va_list ap; + +@@ -248,8 +248,8 @@ void wpa_printf(int level, const char *f + } + + +-static void _wpa_hexdump(int level, const char *title, const u8 *buf, +- size_t len, int show) ++void _wpa_hexdump(int level, const char *title, const u8 *buf, ++ size_t len, int show) + { + size_t i; + +@@ -375,20 +375,9 @@ static void _wpa_hexdump(int level, cons + #endif /* CONFIG_ANDROID_LOG */ + } + +-void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len) +-{ +- _wpa_hexdump(level, title, buf, len, 1); +-} +- +- +-void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len) +-{ +- _wpa_hexdump(level, title, buf, len, wpa_debug_show_keys); +-} + +- +-static void _wpa_hexdump_ascii(int level, const char *title, const u8 *buf, +- size_t len, int show) ++void _wpa_hexdump_ascii(int level, const char *title, const u8 *buf, ++ size_t len, int show) + { + size_t i, llen; + const u8 *pos = buf; +@@ -495,19 +484,6 @@ static void _wpa_hexdump_ascii(int level + } + + +-void wpa_hexdump_ascii(int level, const char *title, const u8 *buf, size_t len) +-{ +- _wpa_hexdump_ascii(level, title, buf, len, 1); +-} +- +- +-void wpa_hexdump_ascii_key(int level, const char *title, const u8 *buf, +- size_t len) +-{ +- _wpa_hexdump_ascii(level, title, buf, len, wpa_debug_show_keys); +-} +- +- + #ifdef CONFIG_DEBUG_FILE + static char *last_path = NULL; + #endif /* CONFIG_DEBUG_FILE */ +@@ -591,7 +567,7 @@ void wpa_msg_register_ifname_cb(wpa_msg_ + } + + +-void wpa_msg(void *ctx, int level, const char *fmt, ...) ++void _wpa_msg(void *ctx, int level, const char *fmt, ...) + { + va_list ap; + char *buf; +@@ -625,7 +601,7 @@ void wpa_msg(void *ctx, int level, const + } + + +-void wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...) ++void _wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...) + { + va_list ap; + char *buf; +--- a/src/utils/wpa_debug.h ++++ b/src/utils/wpa_debug.h +@@ -43,6 +43,17 @@ int wpa_debug_open_file(const char *path + int wpa_debug_reopen_file(void); + void wpa_debug_close_file(void); + ++/* internal */ ++void _wpa_hexdump(int level, const char *title, const u8 *buf, ++ size_t len, int show); ++void _wpa_hexdump_ascii(int level, const char *title, const u8 *buf, ++ size_t len, int show); ++extern int wpa_debug_show_keys; ++ ++#ifndef CONFIG_MSG_MIN_PRIORITY ++#define CONFIG_MSG_MIN_PRIORITY 0 ++#endif ++ + /** + * wpa_debug_printf_timestamp - Print timestamp for debug output + * +@@ -63,9 +74,15 @@ void wpa_debug_print_timestamp(void); + * + * Note: New line '\n' is added to the end of the text when printing to stdout. + */ +-void wpa_printf(int level, const char *fmt, ...) ++void _wpa_printf(int level, const char *fmt, ...) + PRINTF_FORMAT(2, 3); + ++#define wpa_printf(level, ...) \ ++ do { \ ++ if (level >= CONFIG_MSG_MIN_PRIORITY) \ ++ _wpa_printf(level, __VA_ARGS__); \ ++ } while(0) ++ + /** + * wpa_hexdump - conditional hex dump + * @level: priority level (MSG_*) of the message +@@ -77,7 +94,13 @@ PRINTF_FORMAT(2, 3); + * output may be directed to stdout, stderr, and/or syslog based on + * configuration. The contents of buf is printed out has hex dump. + */ +-void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len); ++static inline void wpa_hexdump(int level, const char *title, const u8 *buf, size_t len) ++{ ++ if (level < CONFIG_MSG_MIN_PRIORITY) ++ return; ++ ++ _wpa_hexdump(level, title, buf, len, 1); ++} + + static inline void wpa_hexdump_buf(int level, const char *title, + const struct wpabuf *buf) +@@ -99,7 +122,13 @@ static inline void wpa_hexdump_buf(int l + * like wpa_hexdump(), but by default, does not include secret keys (passwords, + * etc.) in debug output. + */ +-void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len); ++static inline void wpa_hexdump_key(int level, const char *title, const u8 *buf, size_t len) ++{ ++ if (level < CONFIG_MSG_MIN_PRIORITY) ++ return; ++ ++ _wpa_hexdump(level, title, buf, len, wpa_debug_show_keys); ++} + + static inline void wpa_hexdump_buf_key(int level, const char *title, + const struct wpabuf *buf) +@@ -121,8 +150,14 @@ static inline void wpa_hexdump_buf_key(i + * the hex numbers and ASCII characters (for printable range) are shown. 16 + * bytes per line will be shown. + */ +-void wpa_hexdump_ascii(int level, const char *title, const u8 *buf, +- size_t len); ++static inline void wpa_hexdump_ascii(int level, const char *title, ++ const u8 *buf, size_t len) ++{ ++ if (level < CONFIG_MSG_MIN_PRIORITY) ++ return; ++ ++ _wpa_hexdump_ascii(level, title, buf, len, 1); ++} + + /** + * wpa_hexdump_ascii_key - conditional hex dump, hide keys +@@ -138,8 +173,14 @@ void wpa_hexdump_ascii(int level, const + * bytes per line will be shown. This works like wpa_hexdump_ascii(), but by + * default, does not include secret keys (passwords, etc.) in debug output. + */ +-void wpa_hexdump_ascii_key(int level, const char *title, const u8 *buf, +- size_t len); ++static inline void wpa_hexdump_ascii_key(int level, const char *title, ++ const u8 *buf, size_t len) ++{ ++ if (level < CONFIG_MSG_MIN_PRIORITY) ++ return; ++ ++ _wpa_hexdump_ascii(level, title, buf, len, wpa_debug_show_keys); ++} + + /* + * wpa_dbg() behaves like wpa_msg(), but it can be removed from build to reduce +@@ -172,7 +213,12 @@ void wpa_hexdump_ascii_key(int level, co + * + * Note: New line '\n' is added to the end of the text when printing to stdout. + */ +-void wpa_msg(void *ctx, int level, const char *fmt, ...) PRINTF_FORMAT(3, 4); ++void _wpa_msg(void *ctx, int level, const char *fmt, ...) PRINTF_FORMAT(3, 4); ++#define wpa_msg(ctx, level, ...) \ ++ do { \ ++ if (level >= CONFIG_MSG_MIN_PRIORITY) \ ++ _wpa_msg(ctx, level, __VA_ARGS__); \ ++ } while(0) + + /** + * wpa_msg_ctrl - Conditional printf for ctrl_iface monitors +@@ -186,8 +232,13 @@ void wpa_msg(void *ctx, int level, const + * attached ctrl_iface monitors. In other words, it can be used for frequent + * events that do not need to be sent to syslog. + */ +-void wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...) ++void _wpa_msg_ctrl(void *ctx, int level, const char *fmt, ...) + PRINTF_FORMAT(3, 4); ++#define wpa_msg_ctrl(ctx, level, ...) \ ++ do { \ ++ if (level >= CONFIG_MSG_MIN_PRIORITY) \ ++ _wpa_msg_ctrl(ctx, level, __VA_ARGS__); \ ++ } while(0) + + typedef void (*wpa_msg_cb_func)(void *ctx, int level, const char *txt, + size_t len); diff --git a/package/hostapd/patches/560-indicate-features.patch b/package/hostapd/patches/560-indicate-features.patch new file mode 100644 index 000000000..d01e18b86 --- /dev/null +++ b/package/hostapd/patches/560-indicate-features.patch @@ -0,0 +1,82 @@ +--- a/hostapd/main.c ++++ b/hostapd/main.c +@@ -13,6 +13,7 @@ + + #include "utils/common.h" + #include "utils/eloop.h" ++#include "utils/build_features.h" + #include "crypto/random.h" + #include "crypto/tls.h" + #include "common/version.h" +@@ -560,7 +561,7 @@ int main(int argc, char *argv[]) + + wpa_supplicant_event = hostapd_wpa_event; + for (;;) { +- c = getopt(argc, argv, "Bde:f:hKP:tvg:"); ++ c = getopt(argc, argv, "Bde:f:hKP:tg:v::"); + if (c < 0) + break; + switch (c) { +@@ -592,6 +593,8 @@ int main(int argc, char *argv[]) + wpa_debug_timestamp++; + break; + case 'v': ++ if (optarg) ++ exit(!has_feature(optarg)); + show_version(); + exit(1); + break; +--- a/wpa_supplicant/main.c ++++ b/wpa_supplicant/main.c +@@ -12,6 +12,7 @@ + #endif /* __linux__ */ + + #include "common.h" ++#include "build_features.h" + #include "wpa_supplicant_i.h" + #include "driver_i.h" + +@@ -156,7 +157,7 @@ int main(int argc, char *argv[]) + + for (;;) { + c = getopt(argc, argv, +- "b:Bc:C:D:de:f:g:hH:i:KLNo:O:p:P:qsTtuvW"); ++ "b:Bc:C:D:de:f:g:hH:i:KLNo:O:p:P:qsTtuv::W"); + if (c < 0) + break; + switch (c) { +@@ -248,8 +249,12 @@ int main(int argc, char *argv[]) + break; + #endif /* CONFIG_DBUS */ + case 'v': +- printf("%s\n", wpa_supplicant_version); +- exitcode = 0; ++ if (optarg) { ++ exitcode = !has_feature(optarg); ++ } else { ++ printf("%s\n", wpa_supplicant_version); ++ exitcode = 0; ++ } + goto out; + case 'W': + params.wait_for_monitor++; +--- /dev/null ++++ b/src/utils/build_features.h +@@ -0,0 +1,17 @@ ++#ifndef BUILD_FEATURES_H ++#define BUILD_FEATURES_H ++ ++static inline int has_feature(const char *feat) ++{ ++#ifdef IEEE8021X_EAPOL ++ if (!strcmp(feat, "eap")) ++ return 1; ++#endif ++#ifdef IEEE80211N ++ if (!strcmp(feat, "11n")) ++ return 1; ++#endif ++ return 0; ++} ++ ++#endif /* BUILD_FEATURES_H */ diff --git a/package/hostapd/patches/570-genl_connect_debug.patch b/package/hostapd/patches/570-genl_connect_debug.patch new file mode 100644 index 000000000..5f140489b --- /dev/null +++ b/package/hostapd/patches/570-genl_connect_debug.patch @@ -0,0 +1,11 @@ +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -127,7 +127,7 @@ static struct nl_handle * nl_create_hand + } + + if (genl_connect(handle)) { +- wpa_printf(MSG_ERROR, "nl80211: Failed to connect to generic " ++ wpa_printf(MSG_DEBUG, "nl80211: Failed to connect to generic " + "netlink (%s)", dbg); + nl80211_handle_destroy(handle); + return NULL; diff --git a/package/hostapd/patches/580-fix_bss_addr.patch b/package/hostapd/patches/580-fix_bss_addr.patch new file mode 100644 index 000000000..3a76668c1 --- /dev/null +++ b/package/hostapd/patches/580-fix_bss_addr.patch @@ -0,0 +1,11 @@ +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -7738,7 +7738,7 @@ static int i802_set_wds_sta(void *priv, + if (!if_nametoindex(name)) { + if (nl80211_create_iface(drv, name, + NL80211_IFTYPE_AP_VLAN, +- NULL, 1) < 0) ++ bss->addr, 1) < 0) + return -1; + if (bridge_ifname && + linux_br_add_if(drv->global->ioctl_sock, diff --git a/package/hostapd/patches/590-hostapd_cli_ifdef.patch b/package/hostapd/patches/590-hostapd_cli_ifdef.patch new file mode 100644 index 000000000..705cef13d --- /dev/null +++ b/package/hostapd/patches/590-hostapd_cli_ifdef.patch @@ -0,0 +1,50 @@ +--- a/hostapd/hostapd_cli.c ++++ b/hostapd/hostapd_cli.c +@@ -67,7 +67,6 @@ static const char *commands_help = + #ifdef CONFIG_IEEE80211W + " sa_query send SA Query to a station\n" + #endif /* CONFIG_IEEE80211W */ +-#ifdef CONFIG_WPS + " wps_pin [timeout] [addr] add WPS Enrollee PIN\n" + " wps_check_pin verify PIN checksum\n" + " wps_pbc indicate button pushed to initiate PBC\n" +@@ -82,7 +81,6 @@ static const char *commands_help = + #endif /* CONFIG_WPS_NFC */ + " wps_ap_pin [params..] enable/disable AP PIN\n" + " wps_config configure AP\n" +-#endif /* CONFIG_WPS */ + " get_config show current configuration\n" + " help show this usage help\n" + " interface [ifname] show interfaces/select interface\n" +@@ -343,7 +341,6 @@ static int hostapd_cli_cmd_sa_query(stru + #endif /* CONFIG_IEEE80211W */ + + +-#ifdef CONFIG_WPS + static int hostapd_cli_cmd_wps_pin(struct wpa_ctrl *ctrl, int argc, + char *argv[]) + { +@@ -573,7 +570,6 @@ static int hostapd_cli_cmd_wps_config(st + ssid_hex, argv[1]); + return wpa_ctrl_command(ctrl, buf); + } +-#endif /* CONFIG_WPS */ + + + static int hostapd_cli_cmd_ess_disassoc(struct wpa_ctrl *ctrl, int argc, +@@ -799,7 +795,6 @@ static struct hostapd_cli_cmd hostapd_cl + #ifdef CONFIG_IEEE80211W + { "sa_query", hostapd_cli_cmd_sa_query }, + #endif /* CONFIG_IEEE80211W */ +-#ifdef CONFIG_WPS + { "wps_pin", hostapd_cli_cmd_wps_pin }, + { "wps_check_pin", hostapd_cli_cmd_wps_check_pin }, + { "wps_pbc", hostapd_cli_cmd_wps_pbc }, +@@ -814,7 +809,6 @@ static struct hostapd_cli_cmd hostapd_cl + #endif /* CONFIG_WPS_NFC */ + { "wps_ap_pin", hostapd_cli_cmd_wps_ap_pin }, + { "wps_config", hostapd_cli_cmd_wps_config }, +-#endif /* CONFIG_WPS */ + { "ess_disassoc", hostapd_cli_cmd_ess_disassoc }, + { "get_config", hostapd_cli_cmd_get_config }, + { "help", hostapd_cli_cmd_help }, diff --git a/package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch b/package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch new file mode 100644 index 000000000..ac0d247d7 --- /dev/null +++ b/package/hostapd/patches/601-wpa_supplicant-add-new-config-params-to-be-used-with.patch @@ -0,0 +1,211 @@ +From 4bb69d15477e0f2b00e166845341dc933de47c58 Mon Sep 17 00:00:00 2001 +From: Antonio Quartulli +Date: Sun, 3 Jun 2012 18:22:56 +0200 +Subject: [PATCHv2 601/602] wpa_supplicant: add new config params to be used + with the ibss join command + +Signed-hostap: Antonio Quartulli +--- + src/drivers/driver.h | 6 +++ + wpa_supplicant/config.c | 96 +++++++++++++++++++++++++++++++++++++++ + wpa_supplicant/config_ssid.h | 6 +++ + wpa_supplicant/wpa_supplicant.c | 23 +++++++--- + 4 files changed, 124 insertions(+), 7 deletions(-) + +--- a/src/drivers/driver.h ++++ b/src/drivers/driver.h +@@ -19,6 +19,7 @@ + + #define WPA_SUPPLICANT_DRIVER_VERSION 4 + ++#include "drivers/nl80211_copy.h" + #include "common/defs.h" + + #define HOSTAPD_CHAN_DISABLED 0x00000001 +@@ -351,6 +352,11 @@ struct wpa_driver_associate_params { + */ + int freq; + ++ int beacon_interval; ++ int fixed_freq; ++ unsigned char rates[NL80211_MAX_SUPP_RATES]; ++ int mcast_rate; ++ + /** + * bg_scan_period - Background scan period in seconds, 0 to disable + * background scan, or -1 to indicate no change to default driver +--- a/wpa_supplicant/config.c ++++ b/wpa_supplicant/config.c +@@ -14,6 +14,7 @@ + #include "rsn_supp/wpa.h" + #include "eap_peer/eap.h" + #include "p2p/p2p.h" ++#include "drivers/nl80211_copy.h" + #include "config.h" + + +@@ -1463,6 +1464,97 @@ static char * wpa_config_write_p2p_clien + + #endif /* CONFIG_P2P */ + ++static int wpa_config_parse_mcast_rate(const struct parse_data *data, ++ struct wpa_ssid *ssid, int line, ++ const char *value) ++{ ++ ssid->mcast_rate = (int)(strtod(value, NULL) * 10); ++ ++ return 0; ++} ++ ++#ifndef NO_CONFIG_WRITE ++static char * wpa_config_write_mcast_rate(const struct parse_data *data, ++ struct wpa_ssid *ssid) ++{ ++ char *value; ++ int res; ++ ++ if (!ssid->mcast_rate == 0) ++ return NULL; ++ ++ value = os_malloc(6); /* longest: 300.0 */ ++ if (value == NULL) ++ return NULL; ++ res = os_snprintf(value, 5, "%.1f", (double)ssid->mcast_rate / 10); ++ if (res < 0) { ++ os_free(value); ++ return NULL; ++ } ++ return value; ++} ++#endif /* NO_CONFIG_WRITE */ ++ ++static int wpa_config_parse_rates(const struct parse_data *data, ++ struct wpa_ssid *ssid, int line, ++ const char *value) ++{ ++ int i; ++ char *pos, *r, *sptr, *end; ++ double rate; ++ ++ pos = (char *)value; ++ r = strtok_r(pos, ",", &sptr); ++ i = 0; ++ while (pos && i < NL80211_MAX_SUPP_RATES) { ++ rate = 0.0; ++ if (r) ++ rate = strtod(r, &end); ++ ssid->rates[i] = rate * 2; ++ if (*end != '\0' || rate * 2 != ssid->rates[i]) ++ return 1; ++ ++ i++; ++ r = strtok_r(NULL, ",", &sptr); ++ } ++ ++ return 0; ++} ++ ++#ifndef NO_CONFIG_WRITE ++static char * wpa_config_write_rates(const struct parse_data *data, ++ struct wpa_ssid *ssid) ++{ ++ char *value, *pos; ++ int res, i; ++ ++ if (ssid->rates[0] <= 0) ++ return NULL; ++ ++ value = os_malloc(6 * NL80211_MAX_SUPP_RATES + 1); ++ if (value == NULL) ++ return NULL; ++ pos = value; ++ for (i = 0; i < NL80211_MAX_SUPP_RATES - 1; i++) { ++ res = os_snprintf(pos, 6, "%.1f,", (double)ssid->rates[i] / 2); ++ if (res < 0) { ++ os_free(value); ++ return NULL; ++ } ++ pos += res; ++ } ++ res = os_snprintf(pos, 6, "%.1f", ++ (double)ssid->rates[NL80211_MAX_SUPP_RATES - 1] / 2); ++ if (res < 0) { ++ os_free(value); ++ return NULL; ++ } ++ ++ value[6 * NL80211_MAX_SUPP_RATES] = '\0'; ++ return value; ++} ++#endif /* NO_CONFIG_WRITE */ ++ + /* Helper macros for network block parser */ + + #ifdef OFFSET +@@ -1638,6 +1730,10 @@ static const struct parse_data ssid_fiel + #endif /* CONFIG_HT_OVERRIDES */ + { INT(ap_max_inactivity) }, + { INT(dtim_period) }, ++ { INT_RANGE(fixed_freq, 0, 1) }, ++ { INT_RANGE(beacon_interval, 0, 1000) }, ++ { FUNC(rates) }, ++ { FUNC(mcast_rate) }, + }; + + #undef OFFSET +--- a/wpa_supplicant/config_ssid.h ++++ b/wpa_supplicant/config_ssid.h +@@ -11,6 +11,7 @@ + + #include "common/defs.h" + #include "eap_peer/eap_config.h" ++#include "drivers/nl80211_copy.h" + + #define MAX_SSID_LEN 32 + +@@ -529,6 +530,11 @@ struct wpa_ssid { + * disabled_until - Network block disabled until this time if non-zero + */ + struct os_time disabled_until; ++ ++ int fixed_freq; ++ int beacon_interval; ++ unsigned char rates[NL80211_MAX_SUPP_RATES]; ++ double mcast_rate; + }; + + #endif /* CONFIG_SSID_H */ +--- a/wpa_supplicant/wpa_supplicant.c ++++ b/wpa_supplicant/wpa_supplicant.c +@@ -1561,15 +1561,24 @@ void wpa_supplicant_associate(struct wpa + params.ssid_len = ssid->ssid_len; + } + +- if (ssid->mode == WPAS_MODE_IBSS && ssid->bssid_set && +- wpa_s->conf->ap_scan == 2) { +- params.bssid = ssid->bssid; +- params.fixed_bssid = 1; ++ if (ssid->mode == WPAS_MODE_IBSS) { ++ if (ssid->bssid_set && wpa_s->conf->ap_scan == 2) { ++ params.bssid = ssid->bssid; ++ params.fixed_bssid = 1; ++ } ++ if (ssid->frequency > 0 && params.freq == 0) ++ /* Initial channel for IBSS */ ++ params.freq = ssid->frequency; ++ params.fixed_freq = ssid->fixed_freq; ++ params.beacon_interval = ssid->beacon_interval; ++ i = 0; ++ while (i < NL80211_MAX_SUPP_RATES) { ++ params.rates[i] = ssid->rates[i]; ++ i++; ++ } ++ params.mcast_rate = ssid->mcast_rate; + } + +- if (ssid->mode == WPAS_MODE_IBSS && ssid->frequency > 0 && +- params.freq == 0) +- params.freq = ssid->frequency; /* Initial channel for IBSS */ + params.wpa_ie = wpa_ie; + params.wpa_ie_len = wpa_ie_len; + params.pairwise_suite = cipher_pairwise; diff --git a/package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch b/package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch new file mode 100644 index 000000000..c426a0bb2 --- /dev/null +++ b/package/hostapd/patches/602-driver_nl80211-use-new-parameters-during-ibss-join.patch @@ -0,0 +1,59 @@ +From ffc4445958a3ed4064f2e1bf73fa478a61c5cf7b Mon Sep 17 00:00:00 2001 +From: Antonio Quartulli +Date: Sun, 3 Jun 2012 18:42:25 +0200 +Subject: [PATCHv2 602/602] driver_nl80211: use new parameters during ibss join + +Signed-hostap: Antonio Quartulli +--- + src/drivers/driver_nl80211.c | 33 ++++++++++++++++++++++++++++++++- + 1 file changed, 32 insertions(+), 1 deletion(-) + +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -6587,7 +6587,7 @@ static int wpa_driver_nl80211_ibss(struc + struct wpa_driver_associate_params *params) + { + struct nl_msg *msg; +- int ret = -1; ++ int ret = -1, i; + int count = 0; + + wpa_printf(MSG_DEBUG, "nl80211: Join IBSS (ifindex=%d)", drv->ifindex); +@@ -6620,6 +6620,37 @@ retry: + wpa_printf(MSG_DEBUG, " * freq=%d", params->freq); + NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, params->freq); + ++ if (params->fixed_freq) { ++ wpa_printf(MSG_DEBUG, " * fixed_freq"); ++ NLA_PUT_FLAG(msg, NL80211_ATTR_FREQ_FIXED); ++ } ++ ++ if (params->beacon_interval > 0) { ++ wpa_printf(MSG_DEBUG, " * beacon_interval=%d", ++ params->beacon_interval); ++ NLA_PUT_U32(msg, NL80211_ATTR_BEACON_INTERVAL, ++ params->beacon_interval); ++ } ++ ++ if (params->rates[0] > 0) { ++ wpa_printf(MSG_DEBUG, " * basic_rates:"); ++ i = 0; ++ while (i < NL80211_MAX_SUPP_RATES && ++ params->rates[i] > 0) { ++ wpa_printf(MSG_DEBUG, " %.1f", ++ (double)params->rates[i] / 2); ++ i++; ++ } ++ NLA_PUT(msg, NL80211_ATTR_BSS_BASIC_RATES, i, ++ params->rates); ++ } ++ ++ if (params->mcast_rate > 0) { ++ wpa_printf(MSG_DEBUG, " * mcast_rates=%.1f", ++ (double)params->mcast_rate / 10); ++ NLA_PUT_U32(msg, NL80211_ATTR_MCAST_RATE, params->mcast_rate); ++ } ++ + ret = nl80211_set_conn_keys(params, msg); + if (ret) + goto nla_put_failure; diff --git a/package/hostapd/patches/604-wpa_s-support-htmode-param.patch b/package/hostapd/patches/604-wpa_s-support-htmode-param.patch new file mode 100644 index 000000000..44931f2f3 --- /dev/null +++ b/package/hostapd/patches/604-wpa_s-support-htmode-param.patch @@ -0,0 +1,156 @@ +From b9329c5dfeed7d5c55d2117d8dfe326fc40c8fb1 Mon Sep 17 00:00:00 2001 +From: Antonio Quartulli +Date: Tue, 3 Jul 2012 00:36:24 +0200 +Subject: [PATCH] wpa_s: support htmode param + +possible values are HT20, HT40-, HT40+ and NOHT + +Signed-off-by: Antonio Quartulli +--- + src/drivers/driver.h | 2 ++ + src/drivers/driver_nl80211.c | 16 ++++++++++ + wpa_supplicant/config.c | 66 +++++++++++++++++++++++++++++++++++++++ + wpa_supplicant/config_ssid.h | 2 ++ + wpa_supplicant/wpa_supplicant.c | 2 ++ + 5 files changed, 88 insertions(+) + +--- a/src/drivers/driver.h ++++ b/src/drivers/driver.h +@@ -356,6 +356,8 @@ struct wpa_driver_associate_params { + int fixed_freq; + unsigned char rates[NL80211_MAX_SUPP_RATES]; + int mcast_rate; ++ int ht_set; ++ unsigned int htmode; + + /** + * bg_scan_period - Background scan period in seconds, 0 to disable +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -6651,6 +6651,22 @@ retry: + NLA_PUT_U32(msg, NL80211_ATTR_MCAST_RATE, params->mcast_rate); + } + ++ if (params->ht_set) { ++ switch(params->htmode) { ++ case NL80211_CHAN_HT20: ++ wpa_printf(MSG_DEBUG, " * ht=HT20"); ++ break; ++ case NL80211_CHAN_HT40PLUS: ++ wpa_printf(MSG_DEBUG, " * ht=HT40+"); ++ break; ++ case NL80211_CHAN_HT40MINUS: ++ wpa_printf(MSG_DEBUG, " * ht=HT40-"); ++ break; ++ } ++ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_CHANNEL_TYPE, ++ params->htmode); ++ } ++ + ret = nl80211_set_conn_keys(params, msg); + if (ret) + goto nla_put_failure; +--- a/wpa_supplicant/config.c ++++ b/wpa_supplicant/config.c +@@ -1495,6 +1495,71 @@ static char * wpa_config_write_mcast_rat + } + #endif /* NO_CONFIG_WRITE */ + ++static int wpa_config_parse_htmode(const struct parse_data *data, ++ struct wpa_ssid *ssid, int line, ++ const char *value) ++{ ++ int i; ++ static const struct { ++ const char *name; ++ unsigned int val; ++ } htmap[] = { ++ { .name = "HT20", .val = NL80211_CHAN_HT20, }, ++ { .name = "HT40+", .val = NL80211_CHAN_HT40PLUS, }, ++ { .name = "HT40-", .val = NL80211_CHAN_HT40MINUS, }, ++ { .name = "NOHT", .val = NL80211_CHAN_NO_HT, }, ++ }; ++ ssid->ht_set = 0;; ++ for (i = 0; i < 4; i++) { ++ if (strcasecmp(htmap[i].name, value) == 0) { ++ ssid->htmode = htmap[i].val; ++ ssid->ht_set = 1; ++ break; ++ } ++ } ++ ++ return 0; ++} ++ ++#ifndef NO_CONFIG_WRITE ++static char * wpa_config_write_htmode(const struct parse_data *data, ++ struct wpa_ssid *ssid) ++{ ++ char *value; ++ int res; ++ ++ value = os_malloc(6); /* longest: HT40+ */ ++ if (value == NULL) ++ return NULL; ++ ++ switch(ssid->htmode) { ++ case NL80211_CHAN_HT20: ++ res = os_snprintf(value, 4, "HT20"); ++ break; ++ case NL80211_CHAN_HT40PLUS: ++ res = os_snprintf(value, 5, "HT40+"); ++ break; ++ case NL80211_CHAN_HT40MINUS: ++ res = os_snprintf(value, 5, "HT40-"); ++ break; ++ case NL80211_CHAN_NO_HT: ++ res = os_snprintf(value, 4, "NOHT"); ++ break; ++ default: ++ os_free(value); ++ return NULL; ++ } ++ ++ if (res < 0) { ++ os_free(value); ++ return NULL; ++ } ++ ++ return value; ++} ++#endif /* NO_CONFIG_WRITE */ ++ ++ + static int wpa_config_parse_rates(const struct parse_data *data, + struct wpa_ssid *ssid, int line, + const char *value) +@@ -1734,6 +1799,7 @@ static const struct parse_data ssid_fiel + { INT_RANGE(beacon_interval, 0, 1000) }, + { FUNC(rates) }, + { FUNC(mcast_rate) }, ++ { FUNC(htmode) }, + }; + + #undef OFFSET +--- a/wpa_supplicant/config_ssid.h ++++ b/wpa_supplicant/config_ssid.h +@@ -535,6 +535,8 @@ struct wpa_ssid { + int beacon_interval; + unsigned char rates[NL80211_MAX_SUPP_RATES]; + double mcast_rate; ++ int ht_set; ++ unsigned int htmode; + }; + + #endif /* CONFIG_SSID_H */ +--- a/wpa_supplicant/wpa_supplicant.c ++++ b/wpa_supplicant/wpa_supplicant.c +@@ -1577,6 +1577,8 @@ void wpa_supplicant_associate(struct wpa + i++; + } + params.mcast_rate = ssid->mcast_rate; ++ params.ht_set = ssid->ht_set; ++ params.htmode = ssid->htmode; + } + + params.wpa_ie = wpa_ie; diff --git a/package/hostapd/patches/610-max_num_sta_probe.patch b/package/hostapd/patches/610-max_num_sta_probe.patch new file mode 100644 index 000000000..e22348c89 --- /dev/null +++ b/package/hostapd/patches/610-max_num_sta_probe.patch @@ -0,0 +1,13 @@ +--- a/src/ap/beacon.c ++++ b/src/ap/beacon.c +@@ -413,6 +413,10 @@ void handle_probe_req(struct hostapd_dat + return; + } + ++ if (!sta && hapd->num_sta >= hapd->conf->max_num_sta) ++ wpa_printf(MSG_MSGDUMP, "Probe Request from " MACSTR " ignored," ++ " too many connected stations.", MAC2STR(mgmt->sa)); ++ + #ifdef CONFIG_INTERWORKING + if (elems.interworking && elems.interworking_len >= 1) { + u8 ant = elems.interworking[0] & 0x0f; -- cgit v1.2.3