From 5c105d9f3fd086aff195d3849dcf847d6b0bd927 Mon Sep 17 00:00:00 2001 From: blogic Date: Fri, 5 Oct 2012 10:12:53 +0000 Subject: branch Attitude Adjustment git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- README | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 README (limited to 'README') diff --git a/README b/README new file mode 100644 index 000000000..6d2b27fb3 --- /dev/null +++ b/README @@ -0,0 +1,34 @@ +This is the buildsystem for the OpenWrt Linux distribution. + +Please use "make menuconfig" to configure your appreciated +configuration for the toolchain and firmware. + +You need to have installed gcc, binutils, patch, bzip2, flex, +make, gettext, pkg-config, unzip, libz-dev and libc headers. + +Run "./scripts/feeds update" to get the latest package definitions +defined in feeds.conf / feeds.conf.default respectively +and "./scripts/feeds install" to install symlinks into "package/feeds/*". + +Use "make menuconfig" to configure your image. + +Simply running "make" will build your firmware. +It will download all sources, build the cross-compile toolchain, +the kernel and all choosen applications. + +You can use "scripts/flashing/flash.sh" for remotely updating your embedded +system via tftp. + +The OpenWrt system is documented in docs/. You will need a LaTeX distribution +and the tex4ht package to build the documentation. Type "make -C docs/" to build it. + +To build your own firmware you need to have access to a Linux, BSD or MacOSX system +(case-sensitive filesystem required). Cygwin will not be supported because of +the lack of case sensitiveness in the file system. + + +Sunshine! + Your OpenWrt Project + http://openwrt.org + + -- cgit v1.2.3