aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
Commit message (Collapse)AuthorAgeFilesLines
* AA: ar71xx: set pad6 cfg for AR8327 on the AP136 boardjuhosg2012-11-251-10/+19
| | | | | | | | | | | Backport of r34316. Also override the pll_1000 value. Without these settings ethernet suffers from packet loss. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34374 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: fix GPIO function selection for AR934xjuhosg2012-11-254-7/+217
| | | | | | | | Backport of r34275. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34368 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: restore rb4xx kernel partition size to the original valuejuhosg2012-11-251-1/+1
| | | | | | | | | | | Backport of r34274. The new lzma compressed elf kernel image fits into that, even on devices with large page NAND chips. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34367 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: install lzma compressed elf kernel image from wget2nandjuhosg2012-11-251-1/+1
| | | | | | | | Backport of r34273. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34366 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx/image: provide lzma compressed elf kernel imagejuhosg2012-11-251-0/+2
| | | | | | | | | | Backport of r34272. This will be used on the RB4xx/RB7xx/RB2011 boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34365 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx/image: relink loader.elf image to LOADADDRjuhosg2012-11-252-5/+21
| | | | | | | | | | | Backport of r34271. This allows to load the resulting image directly from RouterBOOT. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34364 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: use custom LZMA dictionary size for WNDR3700 imagesjuhosg2012-11-251-4/+4
| | | | | | | | | | Backport of r34248. Based on a patch by Hannu Nyman. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34360 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add user-space support for the RB435G boardjuhosg2012-11-252-0/+9
| | | | | | | | Backport of r34240. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34355 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add kernel support for the RB435G boardjuhosg2012-11-252-0/+39
| | | | | | | | Backport of r34239. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34354 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: update PCI IRQ map for RB4xx devicesjuhosg2012-11-251-0/+28
| | | | | | | | | | Backport of r34238. Should fix #12269. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34353 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: create profile and build image for the OpenMesh MR600 boardjuhosg2012-11-252-0/+12
| | | | | | | | | Backport of r34237. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34352 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: enable sysupgrade for the OpenMesh MR600juhosg2012-11-252-15/+42
| | | | | | | | | Backport of r34235. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34350 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: rename om2p.sh upgrade script to openmesh.shjuhosg2012-11-251-0/+0
| | | | | | | | | | | Backport of r34234. It will be used on other boards as well. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34349 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: scripts/om-fwupgradecfg-gen.sh: add support for the MR600juhosg2012-11-251-2/+3
| | | | | | | | | Backport of r34233. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34348 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add user-space support for the OpenMesh MR600 boardjuhosg2012-11-254-0/+13
| | | | | | | | | Backport of r34232. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34346 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add kernel support for the OpenMesh MR600 boardjuhosg2012-11-253-0/+168
| | | | | | | | | Backport of r34231. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34345 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: scripts: rename om2p-fwupgradecfg-gen.sh to more generic ↵juhosg2012-11-251-1/+1
| | | | | | | | | | | | | om-fwupgradecfg-gen.sh Backport of r34200. It will be used for non OM2P boards as well. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34344 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor boardjuhosg2012-11-252-1/+13
| | | | | | | | | Backport of r34198. Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34343 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor boardjuhosg2012-11-253-2/+7
| | | | | | | | | Backport of r34197. Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34342 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add support for the Ubiquiti UniFi AP-Outdoor devicejuhosg2012-11-251-0/+66
| | | | | | | | | | | | | | | | Backport of r34196. [juhosg: - rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches - wrap long lines in mach-ubnt-xm - remove default network config, set it from uci-defaults/network instead - remove user-space, and image generation stuff] Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34341 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add profiles and build images for old PowerCloud System devicesjuhosg2012-11-252-1/+76
| | | | | | | | | | | | | Backport of r34195. [juhosg: - use 'PowerCloud Systems' instead of 'PCS' in the profiles - sort SingleProfile instances in image/Makefile] Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34340 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add profile and build image for the TL-WA7510N boardjuhosg2012-11-252-0/+12
| | | | | | | | | | | Backport of r34190. [juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34339 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: user space support for the TL-WA7510Njuhosg2012-11-252-0/+4
| | | | | | | | | | | Backport of r34188. [juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34337 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add support for TP-Link TL-WA7510Njuhosg2012-11-252-11/+50
| | | | | | | | | | | | | | | | | | | | | | Backport of r34187. It is mostly the same as TL-WA901N. WLAN and LAN are working. LAN LED is working. WLAN signal strength LEDs are not working yet. http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n [juhosg: - cleanup commit message - move non kernel related stuff into separate changes - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch - merge WA7510N support into the mach-tl-wa901nd.c file - add 3.6 support] Signed-off-by: Stefan Helmert <helst_listen@aol.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34335 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: nuke ath79_set_usb_power_gpio helperjuhosg2012-11-251-47/+0
| | | | | | | | | | Backport of r34088. It is no longer used. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34334 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpiojuhosg2012-11-259-19/+30
| | | | | | | | Backport of r34087. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34333 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: don't use the unknown LED on the ZCN-1523-5 boardjuhosg2012-11-041-4/+1
| | | | | | | | | | | | | | | | Backport of r34076. According to #12421, GPIO 1 controls the power output on the unused lines of the LAN2 port. Remove the LED definition in order to prevent possible permanent hardware damage. If someone needs that, the power-out feature can be controlled via the GPIO sysfs interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34077 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: include mtd layout in the command line for ZCN-1523H-* boardsjuhosg2012-11-041-2/+2
| | | | | | | | Backport of r34074. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34075 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boardsjuhosg2012-11-041-2/+5
| | | | | | | | | | Backport of r34072. Also add the missing ATH79_MACH_ZCN_1523H_5 symbol. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34073 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G ↵juhosg2012-10-291-1/+2
| | | | | | | | | | | | | boards Bacport of r33993. The default pll_1000 value had to be changed in order to make it working. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33994 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: enable sysupgrade for the CAP4200AG boardjuhosg2012-10-281-1/+5
| | | | | | | | Backport of r33960. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33981 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add profile and build image for the CAP4200AGjuhosg2012-10-282-0/+19
| | | | | | | | Backport of r33958. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33979 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add user-space part for the CAP4200AGjuhosg2012-10-284-0/+13
| | | | | | | | Backport of r33957. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33978 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add support for the Senao CAP4200AG boardjuhosg2012-10-283-0/+171
| | | | | | | | Backport of r33956. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33977 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add ath79_wmac_disable_[25]ghz helpersjuhosg2012-10-281-0/+31
| | | | | | | | Backport of r33955. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33976 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: use mtd_read in wrt160nl_partjuhosg2012-10-281-2/+2
| | | | | | | | Backport of r33951. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33973 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: use mtd_read in tplinkpartjuhosg2012-10-281-4/+4
| | | | | | | | Backport of r33950. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33972 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: generate 4,8,16M images for the WPE72juhosg2012-10-271-1/+4
| | | | | | | | Backport of r33949. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33953 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: reject TP-Link images containing a bootloaderjuhosg2012-10-261-0/+12
| | | | | | | | | | | | | | Backport of r33944. The original TP-Link firmware images can be flashed via the sysupgrade command, however those may contain a bootloader. Flashing such an image via sysupgrade bricks the board, and it can't be recovered without a serial console. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33948 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: rw2458n - fix flash partsjuhosg2012-10-191-10/+1
| | | | | | | | | | | Backport of r33867. See #12338. Redwave rw2458 has uboot, not redboot. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33883 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: merge machine support patchesjuhosg2012-10-184-77/+21
| | | | | | | | Backport of r33820. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33838 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120juhosg2012-10-181-26/+16
| | | | | | | | Backport of r33819. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33837 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routinesjuhosg2012-10-185-97/+7
| | | | | | | | Backport of r33818. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33836 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add a helper function for setting up ETH_CFG register on AR934xjuhosg2012-10-182-0/+25
| | | | | | | | Backport of r33817. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33835 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: OM2P-HS sysupgrade supportjuhosg2012-10-171-0/+2
| | | | | | | | | Backport of r33803. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33811 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: add support for the OpenMesh OM2P-HS boardjuhosg2012-10-176-2/+85
| | | | | | | | | Backport of r33800. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33808 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: fix sysupgrade for jjPlus JWAP003juhosg2012-10-141-4/+6
| | | | | | | | | | | Backport of r33769. [juhosg: change commit message] Signed-off-by: Artur Wronowski <arteqw@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33772 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: ew-dorin: added ethernet switch configurationjuhosg2012-10-141-1/+6
| | | | | | | | | Backport of r33768. Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33771 3c298f89-4303-0410-b956-a3cf2f4a3e73
* AA: ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LCjuhosg2012-10-141-2/+2
| | | | | | | | | | | | | | | Backport of r33767. Commit r33248 introduced a regression by passing the board name plus 'board=' in the third argument. The board name string has to be put into the image as identifier of the image type. [juhosg: fix OpenMesh template instead of use of string substitution] Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33770 3c298f89-4303-0410-b956-a3cf2f4a3e73
* branch Attitude Adjustmentblogic2012-10-05316-0/+41785
git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@33625 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 23:37:53 +0000