diff options
Diffstat (limited to 'target/linux/xburst/patches-3.3/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch')
| -rw-r--r-- | target/linux/xburst/patches-3.3/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch | 351 |
1 files changed, 351 insertions, 0 deletions
diff --git a/target/linux/xburst/patches-3.3/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch b/target/linux/xburst/patches-3.3/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch new file mode 100644 index 000000000..01c211ba7 --- /dev/null +++ b/target/linux/xburst/patches-3.3/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch @@ -0,0 +1,351 @@ +From 27ff621cd9a5347efda4be502abbef13a99146ce Mon Sep 17 00:00:00 2001 +From: Maarten ter Huurne <maarten@treewalker.org> +Date: Sun, 29 Aug 2010 08:11:00 +0200 +Subject: [PATCH 11/21] MIPS: JZ4740: Added setting of PLL rate and main + dividers. + +This functionality makes a cpufreq driver possible. +Squashed version of the development done in the jz-2.6.39 branch. +--- + arch/mips/jz4740/clock.c | 230 ++++++++++++++++++++++++++++++++++++++++++++-- + arch/mips/jz4740/clock.h | 4 + + 2 files changed, 224 insertions(+), 10 deletions(-) + +--- a/arch/mips/jz4740/clock.c ++++ b/arch/mips/jz4740/clock.c +@@ -1,5 +1,8 @@ + /* ++ * Copyright (c) 2006-2007, Ingenic Semiconductor Inc. + * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> ++ * Copyright (c) 2010, Ulrich Hecht <ulrich.hecht@gmail.com> ++ * Copyright (c) 2010, Maarten ter Huurne <maarten@treewalker.org> + * JZ4740 SoC clock support + * + * This program is free software; you can redistribute it and/or modify it +@@ -41,16 +44,20 @@ + #define JZ_CLOCK_CTRL_I2S_SRC_PLL BIT(31) + #define JZ_CLOCK_CTRL_KO_ENABLE BIT(30) + #define JZ_CLOCK_CTRL_UDC_SRC_PLL BIT(29) +-#define JZ_CLOCK_CTRL_UDIV_MASK 0x1f800000 + #define JZ_CLOCK_CTRL_CHANGE_ENABLE BIT(22) + #define JZ_CLOCK_CTRL_PLL_HALF BIT(21) +-#define JZ_CLOCK_CTRL_LDIV_MASK 0x001f0000 + #define JZ_CLOCK_CTRL_UDIV_OFFSET 23 + #define JZ_CLOCK_CTRL_LDIV_OFFSET 16 + #define JZ_CLOCK_CTRL_MDIV_OFFSET 12 + #define JZ_CLOCK_CTRL_PDIV_OFFSET 8 + #define JZ_CLOCK_CTRL_HDIV_OFFSET 4 + #define JZ_CLOCK_CTRL_CDIV_OFFSET 0 ++#define JZ_CLOCK_CTRL_UDIV_MASK (0x3f << JZ_CLOCK_CTRL_UDIV_OFFSET) ++#define JZ_CLOCK_CTRL_LDIV_MASK (0x1f << JZ_CLOCK_CTRL_LDIV_OFFSET) ++#define JZ_CLOCK_CTRL_MDIV_MASK (0x0f << JZ_CLOCK_CTRL_MDIV_OFFSET) ++#define JZ_CLOCK_CTRL_PDIV_MASK (0x0f << JZ_CLOCK_CTRL_PDIV_OFFSET) ++#define JZ_CLOCK_CTRL_HDIV_MASK (0x0f << JZ_CLOCK_CTRL_HDIV_OFFSET) ++#define JZ_CLOCK_CTRL_CDIV_MASK (0x0f << JZ_CLOCK_CTRL_CDIV_OFFSET) + + #define JZ_CLOCK_GATE_UART0 BIT(0) + #define JZ_CLOCK_GATE_TCU BIT(1) +@@ -90,6 +97,7 @@ + #define JZ_CLOCK_PLL_M_OFFSET 23 + #define JZ_CLOCK_PLL_N_OFFSET 18 + #define JZ_CLOCK_PLL_OD_OFFSET 16 ++#define JZ_CLOCK_PLL_STABILIZE_OFFSET 0 + + #define JZ_CLOCK_LOW_POWER_MODE_DOZE BIT(2) + #define JZ_CLOCK_LOW_POWER_MODE_SLEEP BIT(0) +@@ -97,10 +105,15 @@ + #define JZ_CLOCK_SLEEP_CTRL_SUSPEND_UHC BIT(7) + #define JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC BIT(6) + ++#define JZ_REG_EMC_RTCNT 0x88 ++#define JZ_REG_EMC_RTCOR 0x8C ++ + static void __iomem *jz_clock_base; + static spinlock_t jz_clock_lock; + static LIST_HEAD(jz_clocks); + ++static void __iomem *jz_emc_base; ++ + struct main_clk { + struct clk clk; + uint32_t div_offset; +@@ -204,25 +217,88 @@ static int jz_clk_ko_is_enabled(struct c + return !!(jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_KO_ENABLE); + } + ++static struct static_clk jz_clk_ext; ++ ++static unsigned long jz_clk_pll_calc_rate( ++ unsigned int in_div, unsigned int feedback, unsigned int out_div) ++{ ++ return ((jz_clk_ext.rate / in_div) * feedback) / out_div; ++} ++ ++static void jz_clk_pll_calc_dividers(unsigned long rate, ++ unsigned int *in_div, unsigned int *feedback, unsigned int *out_div) ++{ ++ unsigned int target; ++ ++ /* The frequency after the input divider must be between 1 and 15 MHz. ++ The highest divider yields the best resolution. */ ++ *in_div = jz_clk_ext.rate / 1000000; ++ if (*in_div >= 34) ++ *in_div = 33; ++ ++ /* The frequency before the output divider must be between 100 and ++ 500 MHz. The lowest target rate is more energy efficient. */ ++ if (rate < 25000000) { ++ *out_div = 4; ++ target = 25000000 * 4; ++ } else if (rate <= 50000000) { ++ *out_div = 4; ++ target = rate * 4; ++ } else if (rate <= 100000000) { ++ *out_div = 2; ++ target = rate * 2; ++ } else if (rate <= 500000000) { ++ *out_div = 1; ++ target = rate; ++ } else { ++ *out_div = 1; ++ target = 500000000; ++ } ++ ++ /* Compute the feedback divider. ++ Since the divided input is at least 1 MHz and the target frequency ++ at most 500 MHz, the feedback will be at most 500 and will therefore ++ always fit in the 9-bit register. ++ Similarly, the divided input is at most 15 MHz and the target ++ frequency at least 100 MHz, so the feedback will be at least 6 ++ where the minimum supported value is 2. */ ++ *feedback = ((target / 1000) * *in_div) / (jz_clk_ext.rate / 1000); ++} ++ ++static unsigned long jz_clk_pll_round_rate(struct clk *clk, unsigned long rate) ++{ ++ unsigned int in_div, feedback, out_div; ++ /* The PLL frequency must be a multiple of 24 MHz, since the LCD pixel ++ * clock must be exactly 12 MHz for the TV-out to work. ++ * TODO: A multiple of 12 MHz for the PLL would work if the PLL would ++ * not be divided by 2 before being passed to the set of derived ++ * clocks that includes the LCD pixel clock. ++ * TODO: Systemwide decisions like this should be made by the board ++ * support code, so add some kind of hook for that. ++ */ ++ unsigned long rate24 = (rate / 24000000) * 24000000; ++ ++ jz_clk_pll_calc_dividers(rate24, &in_div, &feedback, &out_div); ++ return jz_clk_pll_calc_rate(in_div, feedback, out_div); ++} ++ + static const int pllno[] = {1, 2, 2, 4}; + + static unsigned long jz_clk_pll_get_rate(struct clk *clk) + { + uint32_t val; +- int m; +- int n; +- int od; ++ unsigned int in_div, feedback, out_div; + + val = jz_clk_reg_read(JZ_REG_CLOCK_PLL); + + if (val & JZ_CLOCK_PLL_BYPASS) + return clk_get_rate(clk->parent); + +- m = ((val >> 23) & 0x1ff) + 2; +- n = ((val >> 18) & 0x1f) + 2; +- od = (val >> 16) & 0x3; ++ feedback = ((val >> 23) & 0x1ff) + 2; ++ in_div = ((val >> 18) & 0x1f) + 2; ++ out_div = pllno[(val >> 16) & 0x3]; + +- return ((clk_get_rate(clk->parent) / n) * m) / pllno[od]; ++ return jz_clk_pll_calc_rate(in_div, feedback, out_div); + } + + static unsigned long jz_clk_pll_half_get_rate(struct clk *clk) +@@ -235,7 +311,77 @@ static unsigned long jz_clk_pll_half_get + return jz_clk_pll_get_rate(clk->parent) >> 1; + } + +-static const int jz_clk_main_divs[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32}; ++#define SDRAM_TREF 15625 /* Refresh period: 4096 refresh cycles/64ms */ ++ ++static void sdram_set_pll(unsigned int pllin) ++{ ++ unsigned int ns, sdramclock; ++ ++ ns = 1000000000 / pllin; ++ sdramclock = (SDRAM_TREF / ns) / 64 + 1; ++ if (sdramclock > 0xff) sdramclock = 0xff; ++ /* Set refresh registers */ ++ writew(sdramclock, jz_emc_base + JZ_REG_EMC_RTCOR); ++ writew(sdramclock, jz_emc_base + JZ_REG_EMC_RTCNT); ++} ++ ++static int jz_clk_pll_set_rate(struct clk *clk, unsigned long rate) ++{ ++ unsigned int ctrl, plcr1; ++ unsigned int feedback, in_div, out_div, pllout, pllout2; ++ ++ jz_clk_pll_calc_dividers(rate, &in_div, &feedback, &out_div); ++ ++ ctrl = jz_clk_reg_read(JZ_REG_CLOCK_CTRL); ++ pllout = jz_clk_pll_calc_rate(in_div, feedback, out_div); ++ pllout2 = (ctrl & JZ_CLOCK_CTRL_PLL_HALF) ? pllout : (pllout / 2); ++ ++ /* Init UHC clock */ ++ writel(pllout2 / 48000000 - 1, jz_clock_base + JZ_REG_CLOCK_UHC); ++ ++ plcr1 = ((feedback - 2) << JZ_CLOCK_PLL_M_OFFSET) | ++ ((in_div - 2) << JZ_CLOCK_PLL_N_OFFSET) | ++ ((out_div - 1) << JZ_CLOCK_PLL_OD_OFFSET) | ++ (0x20 << JZ_CLOCK_PLL_STABILIZE_OFFSET) | ++ JZ_CLOCK_PLL_ENABLED; ++ ++ sdram_set_pll(pllout); ++ ++ /* LCD pixclock */ ++ writel(pllout2 / 12000000 - 1, jz_clock_base + JZ_REG_CLOCK_LCD); ++ ++ /* configure PLL */ ++ __asm__ __volatile__( ++ ".set noreorder\n\t" ++ ".align 5\n" ++ "sw %1,0(%0)\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ ".set reorder\n\t" ++ : ++ : "r" (jz_clock_base + JZ_REG_CLOCK_PLL), "r" (plcr1)); ++ ++ /* MtH: For some reason the MSC will have problems if this flag is not ++ restored, even though the MSC is supposedly the only divider ++ that is not affected by this flag. */ ++ jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_CHANGE_ENABLE); ++ ++ return 0; ++} ++ ++static const unsigned int jz_clk_main_divs[] = { ++ 1, 2, 3, 4, 6, 8, 12, 16, 24, 32 ++}; ++static const unsigned int jz_clk_main_divs_inv[] = { ++ -1, 0, 1, 2, 3, -1, 4, -1, 5, -1, -1, -1, 6, -1, -1, -1, ++ 7, -1, -1, -1, -1, -1, -1, -1, 8, -1, -1, -1, -1, -1, -1, -1, ++ 9 ++}; + + static unsigned long jz_clk_main_round_rate(struct clk *clk, unsigned long rate) + { +@@ -290,6 +436,64 @@ static int jz_clk_main_set_rate(struct c + return 0; + } + ++static struct main_clk jz_clk_cpu; ++ ++int clk_main_set_dividers(bool immediate, unsigned int cdiv, unsigned int hdiv, ++ unsigned int mdiv, unsigned int pdiv) ++{ ++ unsigned int cdiv_enc, hdiv_enc, mdiv_enc, pdiv_enc; ++ unsigned int ctrl; ++ unsigned int tmp, wait; ++ ++ if (cdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) || ++ hdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) || ++ mdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) || ++ pdiv >= ARRAY_SIZE(jz_clk_main_divs_inv)) ++ return -EINVAL; ++ cdiv_enc = jz_clk_main_divs_inv[cdiv]; ++ hdiv_enc = jz_clk_main_divs_inv[hdiv]; ++ mdiv_enc = jz_clk_main_divs_inv[mdiv]; ++ pdiv_enc = jz_clk_main_divs_inv[pdiv]; ++ if (cdiv_enc == (unsigned int)-1 || ++ hdiv_enc == (unsigned int)-1 || ++ mdiv_enc == (unsigned int)-1 || ++ pdiv_enc == (unsigned int)-1) ++ return -EINVAL; ++ ++ ctrl = jz_clk_reg_read(JZ_REG_CLOCK_CTRL); ++ ctrl &= ~(JZ_CLOCK_CTRL_CHANGE_ENABLE | ++ JZ_CLOCK_CTRL_CDIV_MASK | JZ_CLOCK_CTRL_HDIV_MASK | ++ JZ_CLOCK_CTRL_MDIV_MASK | JZ_CLOCK_CTRL_PDIV_MASK); ++ if (immediate) ctrl |= JZ_CLOCK_CTRL_CHANGE_ENABLE; ++ ctrl |= (cdiv_enc << JZ_CLOCK_CTRL_CDIV_OFFSET) | ++ (hdiv_enc << JZ_CLOCK_CTRL_HDIV_OFFSET) | ++ (mdiv_enc << JZ_CLOCK_CTRL_MDIV_OFFSET) | ++ (pdiv_enc << JZ_CLOCK_CTRL_PDIV_OFFSET); ++ ++ /* set dividers */ ++ /* delay loops lifted from the old Ingenic cpufreq driver */ ++ wait = ((clk_get_rate(&jz_clk_cpu.clk) / 1000000) * 500) / 1000; ++ __asm__ __volatile__( ++ ".set noreorder\n\t" ++ ".align 5\n" ++ "sw %2,0(%1)\n\t" ++ "li %0,0\n\t" ++ "1:\n\t" ++ "bne %0,%3,1b\n\t" ++ "addi %0, 1\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ "nop\n\t" ++ ".set reorder\n\t" ++ : "=r" (tmp) ++ : "r" (jz_clock_base + JZ_REG_CLOCK_CTRL), "r" (ctrl), ++ "r" (wait)); ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(clk_main_set_dividers); ++ + static struct clk_ops jz_clk_static_ops = { + .get_rate = jz_clk_static_get_rate, + .enable = jz_clk_enable_gating, +@@ -307,6 +511,8 @@ static struct static_clk jz_clk_ext = { + + static struct clk_ops jz_clk_pll_ops = { + .get_rate = jz_clk_pll_get_rate, ++ .set_rate = jz_clk_pll_set_rate, ++ .round_rate = jz_clk_pll_round_rate, + }; + + static struct clk jz_clk_pll = { +@@ -897,6 +1103,10 @@ static int jz4740_clock_init(void) + if (!jz_clock_base) + return -EBUSY; + ++ jz_emc_base = ioremap(JZ4740_EMC_BASE_ADDR, 0x100); ++ if (!jz_emc_base) ++ return -EBUSY; ++ + spin_lock_init(&jz_clock_lock); + + jz_clk_ext.rate = jz4740_clock_bdata.ext_rate; +--- a/arch/mips/jz4740/clock.h ++++ b/arch/mips/jz4740/clock.h +@@ -17,6 +17,7 @@ + #define __MIPS_JZ4740_CLOCK_H__ + + #include <linux/list.h> ++#include <linux/types.h> + + struct jz4740_clock_board_data { + unsigned long ext_rate; +@@ -63,6 +64,9 @@ struct clk { + + int clk_is_enabled(struct clk *clk); + ++int clk_main_set_dividers(bool immediate, unsigned int cdiv, unsigned int hdiv, ++ unsigned int mdiv, unsigned int pdiv); ++ + #ifdef CONFIG_DEBUG_FS + void jz4740_clock_debugfs_init(void); + void jz4740_clock_debugfs_add_clk(struct clk *clk); |