diff options
Diffstat (limited to 'target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi')
| -rw-r--r-- | target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi.c | 657 | ||||
| -rw-r--r-- | target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi_internal.h | 45 |
2 files changed, 702 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi.c b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi.c new file mode 100644 index 000000000..d7b610c15 --- /dev/null +++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi.c @@ -0,0 +1,657 @@ +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "hif.h" +#include "bmi.h" +#include "htc_api.h" +#include "bmi_internal.h" + +/* +Although we had envisioned BMI to run on top of HTC, this is not what the +final implementation boiled down to on dragon. Its a part of BSP and does +not use the HTC protocol either. On the host side, however, we were still +living with the original idea. I think the time has come to accept the truth +and separate it from HTC which has been carrying BMI's burden all this while. +It shall make HTC state machine relatively simpler +*/ + +/* APIs visible to the driver */ +void +BMIInit(void) +{ + bmiDone = FALSE; +} + +A_STATUS +BMIDone(HIF_DEVICE *device) +{ + A_STATUS status; + A_UINT32 cid; + + if (bmiDone) { + AR_DEBUG_PRINTF (ATH_DEBUG_BMI, ("BMIDone skipped\n")); + return A_OK; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Enter (device: 0x%p)\n", device)); + bmiDone = TRUE; + cid = BMI_DONE; + + status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Exit\n")); + + return A_OK; +} + +A_STATUS +BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info) +{ + A_STATUS status; + A_UINT32 cid; + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Enter (device: 0x%p)\n", device)); + cid = BMI_GET_TARGET_INFO; + + status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_ver, + sizeof(targ_info->target_ver)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Version from the device\n")); + return A_ERROR; + } + + if (targ_info->target_ver == TARGET_VERSION_SENTINAL) { + /* Determine how many bytes are in the Target's targ_info */ + status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_info_byte_count, + sizeof(targ_info->target_info_byte_count)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info Byte Count from the device\n")); + return A_ERROR; + } + + /* + * The Target's targ_info doesn't match the Host's targ_info. + * We need to do some backwards compatibility work to make this OK. + */ + A_ASSERT(targ_info->target_info_byte_count == sizeof(*targ_info)); + + /* Read the remainder of the targ_info */ + status = bmiBufferReceive(device, + ((A_UCHAR *)targ_info)+sizeof(targ_info->target_info_byte_count), + sizeof(*targ_info)-sizeof(targ_info->target_info_byte_count)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info (%d bytes) from the device\n", + targ_info->target_info_byte_count)); + return A_ERROR; + } + } else { + /* + * Target must be an AR6001 whose firmware does not + * support BMI_GET_TARGET_INFO. Construct the data + * that it would have sent. + */ + targ_info->target_info_byte_count = sizeof(targ_info); + targ_info->target_type = TARGET_TYPE_AR6001; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n", + targ_info->target_ver, targ_info->target_type)); + printk("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n", + targ_info->target_ver, targ_info->target_type); + + return A_OK; +} + +A_STATUS +BMIReadMemory(HIF_DEVICE *device, + A_UINT32 address, + A_UCHAR *buffer, + A_UINT32 length) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + A_UINT32 remaining, rxlen; + static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)]; + memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Read Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n", + device, address, length)); + + cid = BMI_READ_MEMORY; + + remaining = length; + + while (remaining) + { + rxlen = (remaining < BMI_DATASZ_MAX) ? remaining : BMI_DATASZ_MAX; + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &address, sizeof(address)); + offset += sizeof(address); + A_MEMCPY(&data[offset], &rxlen, sizeof(rxlen)); + offset += sizeof(length); + + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + status = bmiBufferReceive(device, data, rxlen); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); + return A_ERROR; + } + A_MEMCPY(&buffer[length - remaining], data, rxlen); + remaining -= rxlen; address += rxlen; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read Memory: Exit\n")); + return A_OK; +} + +A_STATUS +BMIWriteMemory(HIF_DEVICE *device, + A_UINT32 address, + A_UCHAR *buffer, + A_UINT32 length) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + A_UINT32 remaining, txlen; + const A_UINT32 header = sizeof(cid) + sizeof(address) + sizeof(length); + static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)]; + memset (&data, 0, header); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Write Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n", + device, address, length)); + + cid = BMI_WRITE_MEMORY; + + remaining = length; + while (remaining) + { + txlen = (remaining < (BMI_DATASZ_MAX - header)) ? + remaining : (BMI_DATASZ_MAX - header); + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &address, sizeof(address)); + offset += sizeof(address); + A_MEMCPY(&data[offset], &txlen, sizeof(txlen)); + offset += sizeof(txlen); + A_MEMCPY(&data[offset], &buffer[length - remaining], txlen); + offset += txlen; + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + remaining -= txlen; address += txlen; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Write Memory: Exit\n")); + + return A_OK; +} + +A_STATUS +BMIExecute(HIF_DEVICE *device, + A_UINT32 address, + A_UINT32 *param) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(*param)]; + memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(*param)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Execute: Enter (device: 0x%p, address: 0x%x, param: %d)\n", + device, address, *param)); + + cid = BMI_EXECUTE; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &address, sizeof(address)); + offset += sizeof(address); + A_MEMCPY(&data[offset], param, sizeof(*param)); + offset += sizeof(*param); + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + status = bmiBufferReceive(device, data, sizeof(*param)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); + return A_ERROR; + } + + A_MEMCPY(param, data, sizeof(*param)); + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Execute: Exit (param: %d)\n", *param)); + return A_OK; +} + +A_STATUS +BMISetAppStart(HIF_DEVICE *device, + A_UINT32 address) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[sizeof(cid) + sizeof(address)]; + memset (&data, 0, sizeof(cid) + sizeof(address)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Set App Start: Enter (device: 0x%p, address: 0x%x)\n", + device, address)); + + cid = BMI_SET_APP_START; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &address, sizeof(address)); + offset += sizeof(address); + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Set App Start: Exit\n")); + return A_OK; +} + +A_STATUS +BMIReadSOCRegister(HIF_DEVICE *device, + A_UINT32 address, + A_UINT32 *param) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[sizeof(cid) + sizeof(address)]; + memset (&data, 0, sizeof(cid) + sizeof(address)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Read SOC Register: Enter (device: 0x%p, address: 0x%x)\n", + device, address)); + + cid = BMI_READ_SOC_REGISTER; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &address, sizeof(address)); + offset += sizeof(address); + + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + status = bmiBufferReceive(device, data, sizeof(*param)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); + return A_ERROR; + } + A_MEMCPY(param, data, sizeof(*param)); + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit (value: %d)\n", *param)); + return A_OK; +} + +A_STATUS +BMIWriteSOCRegister(HIF_DEVICE *device, + A_UINT32 address, + A_UINT32 param) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(param)]; + + memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(param)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Write SOC Register: Enter (device: 0x%p, address: 0x%x, param: %d)\n", + device, address, param)); + + cid = BMI_WRITE_SOC_REGISTER; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &address, sizeof(address)); + offset += sizeof(address); + A_MEMCPY(&data[offset], ¶m, sizeof(param)); + offset += sizeof(param); + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit\n")); + return A_OK; +} + +A_STATUS +BMIrompatchInstall(HIF_DEVICE *device, + A_UINT32 ROM_addr, + A_UINT32 RAM_addr, + A_UINT32 nbytes, + A_UINT32 do_activate, + A_UINT32 *rompatch_id) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) + + sizeof(nbytes) + sizeof(do_activate)]; + + memset (&data, 0, sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) + + sizeof(nbytes) + sizeof(do_activate)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI rompatch Install: Enter (device: 0x%p, ROMaddr: 0x%x, RAMaddr: 0x%x length: %d activate: %d)\n", + device, ROM_addr, RAM_addr, nbytes, do_activate)); + + cid = BMI_ROMPATCH_INSTALL; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &ROM_addr, sizeof(ROM_addr)); + offset += sizeof(ROM_addr); + A_MEMCPY(&data[offset], &RAM_addr, sizeof(RAM_addr)); + offset += sizeof(RAM_addr); + A_MEMCPY(&data[offset], &nbytes, sizeof(nbytes)); + offset += sizeof(nbytes); + A_MEMCPY(&data[offset], &do_activate, sizeof(do_activate)); + offset += sizeof(do_activate); + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + status = bmiBufferReceive(device, (A_UCHAR *)rompatch_id, sizeof(*rompatch_id)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch Install: (rompatch_id=%d)\n", *rompatch_id)); + return A_OK; +} + +A_STATUS +BMIrompatchUninstall(HIF_DEVICE *device, + A_UINT32 rompatch_id) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[sizeof(cid) + sizeof(rompatch_id)]; + memset (&data, 0, sizeof(cid) + sizeof(rompatch_id)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI rompatch Uninstall: Enter (device: 0x%p, rompatch_id: %d)\n", + device, rompatch_id)); + + cid = BMI_ROMPATCH_UNINSTALL; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &rompatch_id, sizeof(rompatch_id)); + offset += sizeof(rompatch_id); + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch UNinstall: (rompatch_id=0x%x)\n", rompatch_id)); + return A_OK; +} + +static A_STATUS +_BMIrompatchChangeActivation(HIF_DEVICE *device, + A_UINT32 rompatch_count, + A_UINT32 *rompatch_list, + A_UINT32 do_activate) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count)]; + A_UINT32 length; + + memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Change rompatch Activation: Enter (device: 0x%p, count: %d)\n", + device, rompatch_count)); + + cid = do_activate ? BMI_ROMPATCH_ACTIVATE : BMI_ROMPATCH_DEACTIVATE; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &rompatch_count, sizeof(rompatch_count)); + offset += sizeof(rompatch_count); + length = rompatch_count * sizeof(*rompatch_list); + A_MEMCPY(&data[offset], rompatch_list, length); + offset += length; + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Change rompatch Activation: Exit\n")); + + return A_OK; +} + +A_STATUS +BMIrompatchActivate(HIF_DEVICE *device, + A_UINT32 rompatch_count, + A_UINT32 *rompatch_list) +{ + return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 1); +} + +A_STATUS +BMIrompatchDeactivate(HIF_DEVICE *device, + A_UINT32 rompatch_count, + A_UINT32 *rompatch_list) +{ + return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 0); +} + +/* BMI Access routines */ +A_STATUS +bmiBufferSend(HIF_DEVICE *device, + A_UCHAR *buffer, + A_UINT32 length) +{ + A_STATUS status; + A_UINT32 timeout; + A_UINT32 address; + static A_UINT32 cmdCredits; + A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX]; + + HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR, + &mboxAddress, sizeof(mboxAddress)); + + cmdCredits = 0; + timeout = BMI_COMMUNICATION_TIMEOUT; + + while(timeout-- && !cmdCredits) { + /* Read the counter register to get the command credits */ + address = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4; + /* hit the credit counter with a 4-byte access, the first byte read will hit the counter and cause + * a decrement, while the remaining 3 bytes has no effect. The rationale behind this is to + * make all HIF accesses 4-byte aligned */ + status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, 4, + HIF_RD_SYNC_BYTE_INC, NULL); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to decrement the command credit count register\n")); + return A_ERROR; + } + /* the counter is only 8=bits, ignore anything in the upper 3 bytes */ + cmdCredits &= 0xFF; + } + + if (cmdCredits) { + address = mboxAddress[ENDPOINT1]; + status = HIFReadWrite(device, address, buffer, length, + HIF_WR_SYNC_BYTE_INC, NULL); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to send the BMI data to the device\n")); + return A_ERROR; + } + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout\n")); + return A_ERROR; + } + + return status; +} + +A_STATUS +bmiBufferReceive(HIF_DEVICE *device, + A_UCHAR *buffer, + A_UINT32 length) +{ + A_STATUS status; + A_UINT32 address; + A_UINT32 timeout; + static A_UINT32 cmdCredits; + A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX]; + + HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR, + &mboxAddress, sizeof(mboxAddress)); + + cmdCredits = 0; + timeout = BMI_COMMUNICATION_TIMEOUT; + while(timeout-- && !cmdCredits) { + /* Read the counter register to get the command credits */ + address = COUNT_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 1; + /* read the counter using a 4-byte read. Since the counter is NOT auto-decrementing, + * we can read this counter multiple times using a non-incrementing address mode. + * The rationale here is to make all HIF accesses a multiple of 4 bytes */ + status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, sizeof(cmdCredits), + HIF_RD_SYNC_BYTE_FIX, NULL); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the command credit count register\n")); + return A_ERROR; + } + /* we did a 4-byte read to the same count register so mask off upper bytes */ + cmdCredits &= 0xFF; + status = A_ERROR; + } + + if (cmdCredits) { + address = mboxAddress[ENDPOINT1]; + status = HIFReadWrite(device, address, buffer, length, + HIF_RD_SYNC_BYTE_INC, NULL); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the BMI data from the device\n")); + return A_ERROR; + } + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Communication timeout\n")); + return A_ERROR; + } + + return status; +} diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi_internal.h b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi_internal.h new file mode 100644 index 000000000..1e213540c --- /dev/null +++ b/target/linux/s3c24xx/files-2.6.30/drivers/ar6000/bmi/bmi_internal.h @@ -0,0 +1,45 @@ +#ifndef BMI_INTERNAL_H +#define BMI_INTERNAL_H +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "a_config.h" +#include "athdefs.h" +#include "a_types.h" +#include "a_osapi.h" +#include "a_debug.h" +#include "AR6Khwreg.h" +#include "bmi_msg.h" + +#define BMI_COMMUNICATION_TIMEOUT 100000 + +/* ------ Global Variable Declarations ------- */ +A_BOOL bmiDone; + +A_STATUS +bmiBufferSend(HIF_DEVICE *device, + A_UCHAR *buffer, + A_UINT32 length); + +A_STATUS +bmiBufferReceive(HIF_DEVICE *device, + A_UCHAR *buffer, + A_UINT32 length); + +#endif |