diff options
Diffstat (limited to 'target/linux/pxa/patches-3.3/003-gumstix_h_verdex_pro_support.patch')
| -rw-r--r-- | target/linux/pxa/patches-3.3/003-gumstix_h_verdex_pro_support.patch | 214 |
1 files changed, 214 insertions, 0 deletions
diff --git a/target/linux/pxa/patches-3.3/003-gumstix_h_verdex_pro_support.patch b/target/linux/pxa/patches-3.3/003-gumstix_h_verdex_pro_support.patch new file mode 100644 index 000000000..6dd291d48 --- /dev/null +++ b/target/linux/pxa/patches-3.3/003-gumstix_h_verdex_pro_support.patch @@ -0,0 +1,214 @@ +From adb6abbe4e3bc17c20cdc70e4a4357f1633d4970 Mon Sep 17 00:00:00 2001 +From: Joseph Kortje <jpktech@rogers.com> +Date: Wed, 28 Oct 2009 21:49:11 -0400 +Subject: [PATCH] [ARM] gumstix.h: Verdex Pro support + +Added a bunch of ifdefs to support both original gumstix boards +as well as the Verdex Pro in gumstix.h + +Signed-off-by: Bobby Powers <bobbypowers@gmail.com> +--- + arch/arm/mach-pxa/include/mach/gumstix.h | 160 ++++++++++++++++++++++++------ + 1 files changed, 130 insertions(+), 30 deletions(-) + +--- a/arch/arm/mach-pxa/include/mach/gumstix.h ++++ b/arch/arm/mach-pxa/include/mach/gumstix.h +@@ -6,6 +6,9 @@ + * published by the Free Software Foundation. + */ + ++#if !defined(__ASM_ARCH_MFP_PXA27X_H) && !defined(__ASM_ARCH_MFP_PXA25X_H) ++ #error You need to include either mfp-pxa27x.h or mfp-pxa25x.h ++#endif + + /* BTRESET - Reset line to Bluetooth module, active low signal. */ + #define GPIO_GUMSTIX_BTRESET 7 +@@ -20,9 +23,18 @@ this moves to GPIO17 and GPIO37. */ + /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn + has detected a cable insertion; driven low otherwise. */ + ++#ifndef CONFIG_MACH_GUMSTIX_VERDEX ++ + #define GPIO_GUMSTIX_USB_GPIOn 35 + #define GPIO_GUMSTIX_USB_GPIOx 41 + ++#else ++ ++#define GPIO_GUMSTIX_USB_GPIOn 100 ++#define GPIO_GUMSTIX_USB_GPIOx 27 ++ ++#endif ++ + /* usb state change */ + #define GUMSTIX_USB_INTR_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn) + +@@ -42,48 +54,136 @@ has detected a cable insertion; driven l + * ETH_RST provides a hardware reset line to the ethernet chip + * ETH is the IRQ line in from the ethernet chip to the PXA + */ ++#ifndef CONFIG_MACH_GUMSTIX_VERDEX + #define GPIO_GUMSTIX_ETH0_RST 80 +-#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT) ++#define GPIO_GUMSTIX_ETH0 36 ++#else ++#define GPIO_GUMSTIX_ETH0_RST 107 ++#define GPIO_GUMSTIX_ETH0 99 ++#endif + #define GPIO_GUMSTIX_ETH1_RST 52 +-#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT) ++#define GPIO_GUMSTIX_ETH1 27 + +-#define GPIO_GUMSTIX_ETH0 36 ++#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT) ++#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT) + #define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) +-#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0) +-#define GPIO_GUMSTIX_ETH1 27 + #define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) +-#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1) +- + +-/* CF reset line */ +-#define GPIO8_RESET 8 ++#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0) ++#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1) + +-/* CF slot 0 */ +-#define GPIO4_nBVD1 4 +-#define GPIO4_nSTSCHG GPIO4_nBVD1 +-#define GPIO11_nCD 11 +-#define GPIO26_PRDY_nBSY 26 +-#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG) +-#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO11_nCD) +-#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY) ++ /* CF reset line */ ++#define GPIO8_CF_RESET 8 ++#define GPIO97_CF_RESET 97 ++#define GPIO110_CF_RESET 110 ++ ++#ifndef CONFIG_MACH_GUMSTIX_VERDEX ++#define GPIO_GUMSTIX_CF_RESET GPIO8_CF_RESET ++#else ++#define GPIO_GUMSTIX_CF_RESET GPIO97_CF_RESET ++#endif ++ ++#define GPIO_GUMSTIX_CF_OLD_RESET GPIO110_CF_RESET ++ ++/* CF signals shared by both sockets */ ++#define GPIO_GUMSTIX_nPOE 48 ++#define GPIO_GUMSTIX_nPWE 49 ++#define GPIO_GUMSTIX_nPIOR 50 ++#define GPIO_GUMSTIX_nPIOW 51 ++ ++#ifndef CONFIG_MACH_GUMSTIX_VERDEX ++#define GPIO_GUMSTIX_nPCE_1 52 ++#define GPIO_GUMSTIX_nPCE_2 53 ++#define GPIO_GUMSTIX_pSKTSEL 54 ++#else ++#define GPIO_GUMSTIX_nPCE_1 102 ++#define GPIO_GUMSTIX_nPCE_2 105 ++#define GPIO_GUMSTIX_pSKTSEL 79 ++#endif ++ ++#define GPIO_GUMSTIX_nPREG 55 ++#define GPIO_GUMSTIX_nPWAIT 56 ++#define GPIO_GUMSTIX_nIOIS16 57 ++ ++/* Pin mode definitions correspond to mfp-pxa2[57]x.h */ ++#define GPIO_GUMSTIX_nPOE_MD GPIO48_nPOE ++#define GPIO_GUMSTIX_nPWE_MD GPIO49_nPWE ++#define GPIO_GUMSTIX_nPIOR_MD GPIO50_nPIOR ++#define GPIO_GUMSTIX_nPIOW_MD GPIO51_nPIOW ++ ++#ifndef CONFIG_MACH_GUMSTIX_VERDEX ++#define GPIO_GUMSTIX_nPCE_1_MD GPIO52_nPCE_1 ++#define GPIO_GUMSTIX_nPCE_2_MD GPIO53_nPCE_2 ++#define GPIO_GUMSTIX_pSKTSEL_MD GPIO54_pSKTSEL ++#else ++#define GPIO_GUMSTIX_nPCE_1_MD GPIO102_nPCE_1 ++#define GPIO_GUMSTIX_nPCE_2_MD GPIO105_nPCE_2 ++#define GPIO_GUMSTIX_pSKTSEL_MD GPIO79_pSKTSEL ++#endif ++ ++#define GPIO_GUMSTIX_nPREG_MD GPIO55_nPREG ++#define GPIO_GUMSTIX_nPWAIT_MD GPIO56_nPWAIT ++#define GPIO_GUMSTIX_nIOIS16_MD GPIO57_nIOIS16 ++ ++ /* CF slot 0 */ ++#define GPIO4_nBVD1_0 4 ++#define GPIO4_nSTSCHG_0 GPIO4_nBVD1_0 ++#define GPIO11_nCD_0 11 ++#define GPIO26_PRDY_nBSY_0 26 ++ ++#define GPIO111_nBVD1_0 111 ++#define GPIO111_nSTSCHG_0 GPIO111_nBVD1_0 ++#define GPIO104_nCD_0 104 ++#define GPIO96_PRDY_nBSY_0 96 ++#define GPIO109_PRDY_nBSY_0 109 ++ ++#ifndef CONFIG_MACH_GUMSTIX_VERDEX ++#define GPIO_GUMSTIX_nBVD1_0 GPIO4_nBVD1_0 ++#define GPIO_GUMSTIX_nSTSCHG_0 GPIO4_nSTSCHG_0 ++#define GPIO_GUMSTIX_nCD_0 GPIO11_nCD_0 ++#define GPIO_GUMSTIX_PRDY_nBSY_0 GPIO26_PRDY_nBSY_0 ++#else ++#define GPIO_GUMSTIX_nBVD1_0 GPIO111_nBVD1_0 ++#define GPIO_GUMSTIX_nSTSCHG_0 GPIO111_nSTSCHG_0 ++#define GPIO_GUMSTIX_nCD_0 GPIO104_nCD_0 ++#define GPIO_GUMSTIX_PRDY_nBSY_0 GPIO96_PRDY_nBSY_0 ++#endif ++ ++#define GPIO_GUMSTIX_PRDY_nBSY_0_OLD GPIO109_PRDY_nBSY_0 ++#define GUMSTIX_S0_PRDY_nBSY_OLD_IRQ PXA_GPIO_TO_IRQ(GPIO109_PRDY_nBSY_0) ++ ++#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_nSTSCHG_0) ++#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_nCD_0) ++#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_PRDY_nBSY_0) + + /* CF slot 1 */ +-#define GPIO18_nBVD1 18 +-#define GPIO18_nSTSCHG GPIO18_nBVD1 +-#define GPIO36_nCD 36 +-#define GPIO27_PRDY_nBSY 27 +-#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG) +-#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD) +-#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY) +- +-/* CF GPIO line modes */ +-#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) +-#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT) +-#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN) +-#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN) +-#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN) +-#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN) +-#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN) ++#define GPIO18_nBVD1_1 18 ++#define GPIO18_nSTSCHG_1 GPIO18_nBVD1_1 ++#define GPIO36_nCD_1 36 ++#define GPIO27_PRDY_nBSY_1 27 ++ ++#define GPIO_GUMSTIX_nBVD1_1 GPIO18_nBVD1_1 ++#define GPIO_GUMSTIX_nSTSCHG_1 GPIO18_nSTSCHG_1 ++#define GPIO_GUMSTIX_nCD_1 GPIO36_nCD_1 ++#define GPIO_GUMSTIX_PRDY_nBSY_1 GPIO27_PRDY_nBSY_1 ++ ++#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG_1) ++#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD_1) ++#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY_1) ++ ++/* CF GPIO line modes - correspond to mfp-pxa2[57]x.h */ ++#define GPIO_GUMSTIX_CF_RESET_MD (GPIO_GUMSTIX_CF_RESET | GPIO_OUT) ++#define GPIO_GUMSTIX_CF_OLD_RESET_MD (GPIO_GUMSTIX_CF_OLD_RESET | GPIO_OUT) ++ ++#define GPIO_GUMSTIX_nSTSCHG_0_MD GPIO111_GPIO ++#define GPIO_GUMSTIX_nCD_0_MD GPIO104_GPIO ++ ++#define GPIO_GUMSTIX_PRDY_nBSY_0_MD GPIO96_GPIO ++#define GPIO_GUMSTIX_PRDY_nBSY_0_OLD_MD GPIO109_GPIO ++ ++#define GPIO_GUMSTIX_nSTSCHG_1_MD GPIO18_GPIO ++#define GPIO_GUMSTIX_nCD_1_MD GPIO36_GPIO ++#define GPIO_GUMSTIX_PRDY_nBSY_1_MD GPIO27_GPIO + + /* for expansion boards that can't be programatically detected */ + extern int am200_init(void); |