diff options
Diffstat (limited to 'target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_intr.c')
| -rw-r--r-- | target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_intr.c | 708 |
1 files changed, 708 insertions, 0 deletions
diff --git a/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_intr.c b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_intr.c new file mode 100644 index 000000000..d469ab46b --- /dev/null +++ b/target/linux/lantiq/files/drivers/usb/dwc_otg/dwc_otg_cil_intr.c @@ -0,0 +1,708 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil_intr.c $ + * $Revision: 1.1.1.1 $ + * $Date: 2009-04-17 06:15:34 $ + * $Change: 553126 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +/** @file + * + * The Core Interface Layer provides basic services for accessing and + * managing the DWC_otg hardware. These services are used by both the + * Host Controller Driver and the Peripheral Controller Driver. + * + * This file contains the Common Interrupt handlers. + */ +#include "dwc_otg_plat.h" +#include "dwc_otg_regs.h" +#include "dwc_otg_cil.h" + +#ifdef DEBUG +inline const char *op_state_str( dwc_otg_core_if_t *_core_if ) +{ + return (_core_if->op_state==A_HOST?"a_host": + (_core_if->op_state==A_SUSPEND?"a_suspend": + (_core_if->op_state==A_PERIPHERAL?"a_peripheral": + (_core_if->op_state==B_PERIPHERAL?"b_peripheral": + (_core_if->op_state==B_HOST?"b_host": + "unknown"))))); +} +#endif + +/** This function will log a debug message + * + * @param _core_if Programming view of DWC_otg controller. + */ +int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *_core_if) +{ + gintsts_data_t gintsts; + DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n", + dwc_otg_mode(_core_if) ? "Host" : "Device"); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.modemismatch = 1; + dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32); + return 1; +} + +/** Start the HCD. Helper function for using the HCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void hcd_start( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->hcd_cb && _core_if->hcd_cb->start) { + _core_if->hcd_cb->start( _core_if->hcd_cb->p ); + } +} +/** Stop the HCD. Helper function for using the HCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void hcd_stop( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->hcd_cb && _core_if->hcd_cb->stop) { + _core_if->hcd_cb->stop( _core_if->hcd_cb->p ); + } +} +/** Disconnect the HCD. Helper function for using the HCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void hcd_disconnect( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->hcd_cb && _core_if->hcd_cb->disconnect) { + _core_if->hcd_cb->disconnect( _core_if->hcd_cb->p ); + } +} +/** Inform the HCD the a New Session has begun. Helper function for + * using the HCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void hcd_session_start( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->hcd_cb && _core_if->hcd_cb->session_start) { + _core_if->hcd_cb->session_start( _core_if->hcd_cb->p ); + } +} + +/** Start the PCD. Helper function for using the PCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void pcd_start( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->pcd_cb && _core_if->pcd_cb->start ) { + _core_if->pcd_cb->start( _core_if->pcd_cb->p ); + } +} +/** Stop the PCD. Helper function for using the PCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void pcd_stop( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->pcd_cb && _core_if->pcd_cb->stop ) { + _core_if->pcd_cb->stop( _core_if->pcd_cb->p ); + } +} +/** Suspend the PCD. Helper function for using the PCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void pcd_suspend( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->pcd_cb && _core_if->pcd_cb->suspend ) { + _core_if->pcd_cb->suspend( _core_if->pcd_cb->p ); + } +} +/** Resume the PCD. Helper function for using the PCD callbacks. + * + * @param _core_if Programming view of DWC_otg controller. + */ +static inline void pcd_resume( dwc_otg_core_if_t *_core_if ) +{ + if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup ) { + _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p ); + } +} + +/** + * This function handles the OTG Interrupts. It reads the OTG + * Interrupt Register (GOTGINT) to determine what interrupt has + * occurred. + * + * @param _core_if Programming view of DWC_otg controller. + */ +int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *_core_if) +{ + dwc_otg_core_global_regs_t *global_regs = + _core_if->core_global_regs; + gotgint_data_t gotgint; + gotgctl_data_t gotgctl; + gintmsk_data_t gintmsk; + + gotgint.d32 = dwc_read_reg32( &global_regs->gotgint); + gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl); + DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32, + op_state_str(_core_if)); + //DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32 ); + + if (gotgint.b.sesenddet) { + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "Session End Detected++ (%s)\n", + op_state_str(_core_if)); + gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl); + + if (_core_if->op_state == B_HOST) { + pcd_start( _core_if ); + _core_if->op_state = B_PERIPHERAL; + } else { + /* If not B_HOST and Device HNP still set. HNP + * Did not succeed!*/ + if (gotgctl.b.devhnpen) { + DWC_DEBUGPL(DBG_ANY, "Session End Detected\n"); + DWC_ERROR( "Device Not Connected/Responding!\n" ); + } + + /* If Session End Detected the B-Cable has + * been disconnected. */ + /* Reset PCD and Gadget driver to a + * clean state. */ + pcd_stop(_core_if); + } + gotgctl.d32 = 0; + gotgctl.b.devhnpen = 1; + dwc_modify_reg32( &global_regs->gotgctl, + gotgctl.d32, 0); + } + if (gotgint.b.sesreqsucstschng) { + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "Session Reqeust Success Status Change++\n"); + gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl); + if (gotgctl.b.sesreqscs) { + if ((_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && + (_core_if->core_params->i2c_enable)) { + _core_if->srp_success = 1; + } + else { + pcd_resume( _core_if ); + /* Clear Session Request */ + gotgctl.d32 = 0; + gotgctl.b.sesreq = 1; + dwc_modify_reg32( &global_regs->gotgctl, + gotgctl.d32, 0); + } + } + } + if (gotgint.b.hstnegsucstschng) { + /* Print statements during the HNP interrupt handling + * can cause it to fail.*/ + gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); + if (gotgctl.b.hstnegscs) { + if (dwc_otg_is_host_mode(_core_if) ) { + _core_if->op_state = B_HOST; + /* + * Need to disable SOF interrupt immediately. + * When switching from device to host, the PCD + * interrupt handler won't handle the + * interrupt if host mode is already set. The + * HCD interrupt handler won't get called if + * the HCD state is HALT. This means that the + * interrupt does not get handled and Linux + * complains loudly. + */ + gintmsk.d32 = 0; + gintmsk.b.sofintr = 1; + dwc_modify_reg32(&global_regs->gintmsk, + gintmsk.d32, 0); + pcd_stop(_core_if); + /* + * Initialize the Core for Host mode. + */ + hcd_start( _core_if ); + _core_if->op_state = B_HOST; + } + } else { + gotgctl.d32 = 0; + gotgctl.b.hnpreq = 1; + gotgctl.b.devhnpen = 1; + dwc_modify_reg32( &global_regs->gotgctl, + gotgctl.d32, 0); + DWC_DEBUGPL( DBG_ANY, "HNP Failed\n"); + DWC_ERROR( "Device Not Connected/Responding\n" ); + } + } + if (gotgint.b.hstnegdet) { + /* The disconnect interrupt is set at the same time as + * Host Negotiation Detected. During the mode + * switch all interrupts are cleared so the disconnect + * interrupt handler will not get executed. + */ + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "Host Negotiation Detected++ (%s)\n", + (dwc_otg_is_host_mode(_core_if)?"Host":"Device")); + if (dwc_otg_is_device_mode(_core_if)){ + DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n",_core_if->op_state); + hcd_disconnect( _core_if ); + pcd_start( _core_if ); + _core_if->op_state = A_PERIPHERAL; + } else { + /* + * Need to disable SOF interrupt immediately. When + * switching from device to host, the PCD interrupt + * handler won't handle the interrupt if host mode is + * already set. The HCD interrupt handler won't get + * called if the HCD state is HALT. This means that + * the interrupt does not get handled and Linux + * complains loudly. + */ + gintmsk.d32 = 0; + gintmsk.b.sofintr = 1; + dwc_modify_reg32(&global_regs->gintmsk, + gintmsk.d32, 0); + pcd_stop( _core_if ); + hcd_start( _core_if ); + _core_if->op_state = A_HOST; + } + } + if (gotgint.b.adevtoutchng) { + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "A-Device Timeout Change++\n"); + } + if (gotgint.b.debdone) { + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "Debounce Done++\n"); + } + + /* Clear GOTGINT */ + dwc_write_reg32 (&_core_if->core_global_regs->gotgint, gotgint.d32); + + return 1; +} + +/** + * This function handles the Connector ID Status Change Interrupt. It + * reads the OTG Interrupt Register (GOTCTL) to determine whether this + * is a Device to Host Mode transition or a Host Mode to Device + * Transition. + * + * This only occurs when the cable is connected/removed from the PHY + * connector. + * + * @param _core_if Programming view of DWC_otg controller. + */ +int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *_core_if) +{ + uint32_t count = 0; + + gintsts_data_t gintsts = { .d32 = 0 }; + gintmsk_data_t gintmsk = { .d32 = 0 }; + gotgctl_data_t gotgctl = { .d32 = 0 }; + + /* + * Need to disable SOF interrupt immediately. If switching from device + * to host, the PCD interrupt handler won't handle the interrupt if + * host mode is already set. The HCD interrupt handler won't get + * called if the HCD state is HALT. This means that the interrupt does + * not get handled and Linux complains loudly. + */ + gintmsk.b.sofintr = 1; + dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, gintmsk.d32, 0); + + DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++ (%s)\n", + (dwc_otg_is_host_mode(_core_if)?"Host":"Device")); + gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl); + DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32); + DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts); + + /* B-Device connector (Device Mode) */ + if (gotgctl.b.conidsts) { + /* Wait for switch to device mode. */ + while (!dwc_otg_is_device_mode(_core_if) ){ + DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n", + (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral")); + MDELAY(100); + if (++count > 10000) *(uint32_t*)NULL=0; + } + _core_if->op_state = B_PERIPHERAL; + dwc_otg_core_init(_core_if); + dwc_otg_enable_global_interrupts(_core_if); + pcd_start( _core_if ); + } else { + /* A-Device connector (Host Mode) */ + while (!dwc_otg_is_host_mode(_core_if) ) { + DWC_PRINT("Waiting for Host Mode, Mode=%s\n", + (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral")); + MDELAY(100); + if (++count > 10000) *(uint32_t*)NULL=0; + } + _core_if->op_state = A_HOST; + /* + * Initialize the Core for Host mode. + */ + dwc_otg_core_init(_core_if); + dwc_otg_enable_global_interrupts(_core_if); + hcd_start( _core_if ); + } + + /* Set flag and clear interrupt */ + gintsts.b.conidstschng = 1; + dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** + * This interrupt indicates that a device is initiating the Session + * Request Protocol to request the host to turn on bus power so a new + * session can begin. The handler responds by turning on bus power. If + * the DWC_otg controller is in low power mode, the handler brings the + * controller out of low power mode before turning on bus power. + * + * @param _core_if Programming view of DWC_otg controller. + */ +int32_t dwc_otg_handle_session_req_intr( dwc_otg_core_if_t *_core_if ) +{ +#ifndef DWC_HOST_ONLY // winder + hprt0_data_t hprt0; +#endif + gintsts_data_t gintsts; + +#ifndef DWC_HOST_ONLY + DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n"); + + if (dwc_otg_is_device_mode(_core_if) ) { + DWC_PRINT("SRP: Device mode\n"); + } else { + DWC_PRINT("SRP: Host mode\n"); + + /* Turn on the port power bit. */ + hprt0.d32 = dwc_otg_read_hprt0( _core_if ); + hprt0.b.prtpwr = 1; + dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32); + + /* Start the Connection timer. So a message can be displayed + * if connect does not occur within 10 seconds. */ + hcd_session_start( _core_if ); + } +#endif + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.sessreqintr = 1; + dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** + * This interrupt indicates that the DWC_otg controller has detected a + * resume or remote wakeup sequence. If the DWC_otg controller is in + * low power mode, the handler must brings the controller out of low + * power mode. The controller automatically begins resume + * signaling. The handler schedules a time to stop resume signaling. + */ +int32_t dwc_otg_handle_wakeup_detected_intr( dwc_otg_core_if_t *_core_if ) +{ + gintsts_data_t gintsts; + + DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n"); + + if (dwc_otg_is_device_mode(_core_if) ) { + dctl_data_t dctl = {.d32=0}; + DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", + dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts)); +#ifdef PARTIAL_POWER_DOWN + if (_core_if->hwcfg4.b.power_optimiz) { + pcgcctl_data_t power = {.d32=0}; + + power.d32 = dwc_read_reg32( _core_if->pcgcctl ); + DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32); + + power.b.stoppclk = 0; + dwc_write_reg32( _core_if->pcgcctl, power.d32); + + power.b.pwrclmp = 0; + dwc_write_reg32( _core_if->pcgcctl, power.d32); + + power.b.rstpdwnmodule = 0; + dwc_write_reg32( _core_if->pcgcctl, power.d32); + } +#endif + /* Clear the Remote Wakeup Signalling */ + dctl.b.rmtwkupsig = 1; + dwc_modify_reg32( &_core_if->dev_if->dev_global_regs->dctl, + dctl.d32, 0 ); + + if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup) { + _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p ); + } + + } else { + /* + * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms + * so that OPT tests pass with all PHYs). + */ + hprt0_data_t hprt0 = {.d32=0}; + pcgcctl_data_t pcgcctl = {.d32=0}; + /* Restart the Phy Clock */ + pcgcctl.b.stoppclk = 1; + dwc_modify_reg32(_core_if->pcgcctl, pcgcctl.d32, 0); + UDELAY(10); + + /* Now wait for 70 ms. */ + hprt0.d32 = dwc_otg_read_hprt0( _core_if ); + DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32); + MDELAY(70); + hprt0.b.prtres = 0; /* Resume */ + dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32); + DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(_core_if->host_if->hprt0)); + } + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.wkupintr = 1; + dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** + * This interrupt indicates that a device has been disconnected from + * the root port. + */ +int32_t dwc_otg_handle_disconnect_intr( dwc_otg_core_if_t *_core_if) +{ + gintsts_data_t gintsts; + + DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n", + (dwc_otg_is_host_mode(_core_if)?"Host":"Device"), + op_state_str(_core_if)); + +/** @todo Consolidate this if statement. */ +#ifndef DWC_HOST_ONLY + if (_core_if->op_state == B_HOST) { + /* If in device mode Disconnect and stop the HCD, then + * start the PCD. */ + hcd_disconnect( _core_if ); + pcd_start( _core_if ); + _core_if->op_state = B_PERIPHERAL; + } else if (dwc_otg_is_device_mode(_core_if)) { + gotgctl_data_t gotgctl = { .d32 = 0 }; + gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl); + if (gotgctl.b.hstsethnpen==1) { + /* Do nothing, if HNP in process the OTG + * interrupt "Host Negotiation Detected" + * interrupt will do the mode switch. + */ + } else if (gotgctl.b.devhnpen == 0) { + /* If in device mode Disconnect and stop the HCD, then + * start the PCD. */ + hcd_disconnect( _core_if ); + pcd_start( _core_if ); + _core_if->op_state = B_PERIPHERAL; + } else { + DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n"); + } + } else { + if (_core_if->op_state == A_HOST) { + /* A-Cable still connected but device disconnected. */ + hcd_disconnect( _core_if ); + } + } +#endif +/* Without OTG, we should use the disconnect function!? winder added.*/ +#if 1 // NO OTG, so host only!! + hcd_disconnect( _core_if ); +#endif + + gintsts.d32 = 0; + gintsts.b.disconnect = 1; + dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32); + return 1; +} +/** + * This interrupt indicates that SUSPEND state has been detected on + * the USB. + * + * For HNP the USB Suspend interrupt signals the change from + * "a_peripheral" to "a_host". + * + * When power management is enabled the core will be put in low power + * mode. + */ +int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *_core_if ) +{ + dsts_data_t dsts; + gintsts_data_t gintsts; + + //805141:<IFTW-fchang>.removed DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n"); + + if (dwc_otg_is_device_mode( _core_if ) ) { + /* Check the Device status register to determine if the Suspend + * state is active. */ + dsts.d32 = dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts); + DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32); + DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d " + "HWCFG4.power Optimize=%d\n", + dsts.b.suspsts, _core_if->hwcfg4.b.power_optimiz); + + +#ifdef PARTIAL_POWER_DOWN +/** @todo Add a module parameter for power management. */ + + if (dsts.b.suspsts && _core_if->hwcfg4.b.power_optimiz) { + pcgcctl_data_t power = {.d32=0}; + DWC_DEBUGPL(DBG_CIL, "suspend\n"); + + power.b.pwrclmp = 1; + dwc_write_reg32( _core_if->pcgcctl, power.d32); + + power.b.rstpdwnmodule = 1; + dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32); + + power.b.stoppclk = 1; + dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32); + + } else { + DWC_DEBUGPL(DBG_ANY,"disconnect?\n"); + } +#endif + /* PCD callback for suspend. */ + pcd_suspend(_core_if); + } else { + if (_core_if->op_state == A_PERIPHERAL) { + DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n"); + /* Clear the a_peripheral flag, back to a_host. */ + pcd_stop( _core_if ); + hcd_start( _core_if ); + _core_if->op_state = A_HOST; + } + } + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.usbsuspend = 1; + dwc_write_reg32( &_core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + + +/** + * This function returns the Core Interrupt register. + */ +static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *_core_if) +{ + gintsts_data_t gintsts; + gintmsk_data_t gintmsk; + gintmsk_data_t gintmsk_common = {.d32=0}; + gintmsk_common.b.wkupintr = 1; + gintmsk_common.b.sessreqintr = 1; + gintmsk_common.b.conidstschng = 1; + gintmsk_common.b.otgintr = 1; + gintmsk_common.b.modemismatch = 1; + gintmsk_common.b.disconnect = 1; + gintmsk_common.b.usbsuspend = 1; + /** @todo: The port interrupt occurs while in device + * mode. Added code to CIL to clear the interrupt for now! + */ + gintmsk_common.b.portintr = 1; + + gintsts.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintsts); + gintmsk.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintmsk); +#ifdef DEBUG + /* if any common interrupts set */ + if (gintsts.d32 & gintmsk_common.d32) { + DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n", + gintsts.d32, gintmsk.d32); + } +#endif + + return ((gintsts.d32 & gintmsk.d32 ) & gintmsk_common.d32); + +} + +/** + * Common interrupt handler. + * + * The common interrupts are those that occur in both Host and Device mode. + * This handler handles the following interrupts: + * - Mode Mismatch Interrupt + * - Disconnect Interrupt + * - OTG Interrupt + * - Connector ID Status Change Interrupt + * - Session Request Interrupt. + * - Resume / Remote Wakeup Detected Interrupt. + * + */ +extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if ) +{ + int retval = 0; + gintsts_data_t gintsts; + + gintsts.d32 = dwc_otg_read_common_intr(_core_if); + + if (gintsts.b.modemismatch) { + retval |= dwc_otg_handle_mode_mismatch_intr( _core_if ); + } + if (gintsts.b.otgintr) { + retval |= dwc_otg_handle_otg_intr( _core_if ); + } + if (gintsts.b.conidstschng) { + retval |= dwc_otg_handle_conn_id_status_change_intr( _core_if ); + } + if (gintsts.b.disconnect) { + retval |= dwc_otg_handle_disconnect_intr( _core_if ); + } + if (gintsts.b.sessreqintr) { + retval |= dwc_otg_handle_session_req_intr( _core_if ); + } + if (gintsts.b.wkupintr) { + retval |= dwc_otg_handle_wakeup_detected_intr( _core_if ); + } + if (gintsts.b.usbsuspend) { + retval |= dwc_otg_handle_usb_suspend_intr( _core_if ); + } + if (gintsts.b.portintr && dwc_otg_is_device_mode(_core_if)) { + /* The port interrupt occurs while in device mode with HPRT0 + * Port Enable/Disable. + */ + gintsts.d32 = 0; + gintsts.b.portintr = 1; + dwc_write_reg32(&_core_if->core_global_regs->gintsts, + gintsts.d32); + retval |= 1; + + } + return retval; +} |